Professional Documents
Culture Documents
1. Using the interaction formula, fbx/Fbx + fby/Fby, calculate 3. Determine the value of P without exceeding the
the maximum ratio of actual to the allowable bending stress allowable stress for web yielding under the interior load.
for load combination 0.75(D+L+W) Fbx= Fby= 207 MPa. 4. Determine the value of P without exceeding the
2. Using the interaction formula, fbx/Fbx + fby/Fby, calculate allowable stress for web yielding at support.
the maximum ratio of actual to the allowable bending stress
for load combination 0.75(D+L+W) if sagrods are provided Problem for Practice
at midspan of the purlins. Fbx= Fby= 207 MPa.
Channel sections are used as a purlin. The top chords of the
Situation 2. truss are sloped 4H to 1V. The trusses are spaced 6 m on
centers and the purlins are spaced 1.2 m on centers.
A column carrying a total load of P is supported by two Superimposed dead load = 500 Pa Live load = 1000 Pa
W21x101 beams as shown. Use Fy = 248 MPa. It is required to Wind load = 1400 Pa
determine the value of P without exceeding the allowable Wind coefficients: Windward = + 0.2 Leeward = -0.6
stress for web yielding. The provision of the NSCP is given. Properties of C200 x 76
N1 = 600 mm, N2 = 300 mm. Sx = 6.19 x 104 mm3 Sy = 1.38 x 104 mm3
Weight, w = 79 N/m
The properties of the beam is as follows: Allowable bending stresses, Fbx = Fby = 207 MPa
Manila FB: @ReviewInnovationsOfficial Cebu FB: Excel-RI CE Review Specialist Inc. Davao FB: Review Innovations Davao Branch
(02) 8735-9161 0919-227-9194 (032) 268-5989 0919-822 -5048 (082) 221-1121 0930-256-0998