Professional Documents
Culture Documents
Step by Step Approach Hysys PDF
Step by Step Approach Hysys PDF
Streams Operations
Hot Key F11 F12
Double click on the Double click on the
Object Palette Material or Energy Stream Operation Icon.
Icon.
Press the Add Material or Press the Add button to
Summary View Add Energy button. open the UnitOps selection
dialog.
UnitOps Selection Dialog
In the **New** cell on a In the **New** cell on an
Material Streams or Energy Operation Workbook page,
Streams Workbook page, type in the new operation
Workbook 1. Filter the list of
type in the new stream name. On the default Unit
Available Unit
name. Ops page, select the Add Operations.
UnitOp button.
1.3.4 - Installing Streams in 1.3.5 - Installing 2. Choose the Unit
Reference Operation from this
the HYSYS Users Guide Operations in the HYSYS
Section group.
Users Guide
3. Add the chosen
operation.
Object Palette Installing Multiple Streams or Operations of One Type
The Object Palette can be used to install streams (Use Modal Property Views must be Off under Preferences.)
and operations directly into HYSYS. You can open 1. Click on the Lock button at the top of the Palette.
or close the Palette with the F4 Hot Key. 2. With the left mouse, click on the Icon for the Stream or Operation
Installing a Single Stream or Operation you want to install.
1. Double click on the appropriate button. 3. Select the Add button to install the stream or operation.
4. Repeat step #3 as many times as is necessary.
or
To deactivate the chosen Object button when in the
1. Click on the Icon with the primary mouse locked mode, press the Cancel button.
button.
2. Click on the Add button Refer to the HYSYS Users Guide, Section 1.3.3 - Object Palette for
more information.
Streams and Operations can be dragged
(secondary mouse button) into the PFD; or click
once in the palette and again in the PFD (primary
mouse button).
4. PFD PFD Specific Buttons
You can open the Workbook for the current Flowsheet by selecting the You can add new pages to the Workbook as well as edit existing ones.
Workbook button or access the Workbook for any Flowsheet with the The procedure is as follows:
Hot Key CTRL W. The Workbook consists of multiple pages that display
1. Select the Workbook item from the Menu Bar, and select Setup.
process information in a tabular format. An individual Workbook page Alternatively, inspect a Workbook page and select Setup from the
can contain streams or operations, but only one object type per menu.
Workbook page is allowed. 2. The Setup view opens. If you want to add a new page, click on the
Shown here is the default Material Streams Workbook page. Add button in the Workbook Pages group. To edit an existing
page, simply highlight the appropriate page.
Double click to 3. If you are adding a new page, you will see the New Object Type
open the Double click on one
view. Double click on a + option to access sub-options. Select
stream's of the Flow cells to
Property View. open the the Object Type for the New Page.
appropriate Input
Composition view.
Double click The Include Sub-
on the Flowsheets button
operation allows you to view
name to open Sub-Flowsheet
its Property streams. The Show
View. Page Tabs show the Name Only button
available Workbook All operations attached to displays only the
pages. the highlighted stream stream name, so that
are listed in this box. you can quickly find a
specific stream.
4. From the Setup view, use the Use Set (4a), Add (4b) or Delete
buttons to modify the Variable list.
4a Defined sets are
Use Set button available for each
Object Type. The
Variables change
depending on the
Object Type.
5. Before exiting back to the Workbook, you can specify the format
for the variable, change the order of the Workbook page
components, change the Page Name, or Add more variables.
6. Press the Close button to return to the Workbook.
1. Select the down arrow next to the cell to open the drop down list.
2. Use the Scroll Bar / Button to move through the list.
3. Highlight the desired item.
4. The item is placed in the cell.
Supplying Matrix Input Supplying Numerical Input
1. Fields which accept numerical input are tied to the Edit Bar.
All input cells in a matrix use the Edit Bar to access input. In this case,
the drop down list is found in the Edit Bar. Units for the active
cell are echoed in the
Unit Box.
You can use the mouse or the keyboard to select the desired input. The
methods are the same as Supplying Cell Input except you can use the Temperature is the
Active location.
F2 key to open the Edit Bar via the keyboard.
Double clicking on
the Object opens its
Property View.
1 7
8. Printing
You can print Specsheets for Streams, Operations, Utilities, DataBook The Print Option
analysis tools, Fluid Packages, Components, Tabular data, Reactions,
Reaction Sets, User Properties, Oil Characterization information and When you choose the Print option from the File menu, HYSYS prints
the PFD. You can access printing through the File menu, Object the Specsheet for the active location.
Inspection, or Reports.
Object for which the Specsheet
will be printed.
The Print option applies to
the Active location.
Object Inspection
(secondary mouse
button) of the Title
Bar accesses the
You can preview
Print Specsheet
the appearance of
option.
the Specsheet prior
to printing.
Reports currently in Creates a new Report and Any Specsheets you add
the case. opens the Report Builder. are displayed here.
Previews the
Report.
You can access the DataBook by using the CTRL D key combination. The Strip Charts are installed individually via the Strip Charts page.
DataBook provides access to Process Data Tables, Strip Charts, Data
Recorder and Case Studies. Opens the
highlighted Strip
Chart.
Object inspect
the chart and
select Graph
Control to
access the
Configuration
view..
Process Data Tables allow you to view key process variables. You can The Data Recorder allows you to store snap shots of your process by
leave the view open to continuously monitor their values. grouping key process variables into different Scenarios.
Enter a
descriptive
name for the
Process Data
Table here.
Select Results
to display the
table or
Toggles between tabular View the Table or Graph graph.
and graphical format. for the highlighted Case
Study.
Refer to Section 5.3 - DataBook in the HYSYS Users Guide for more
information on any of the DataBook Analysis tools.
10. Face Plates Object Inspection of Face Plates
The Face Plate displays all pertinent information about the controller You can Object Inspect Face Plates by clicking with the secondary
when the simulation is running. You can access Face Plates with the mouse button on the Face Plate view. The Object Inspection drop
Hot Key CTRL F. From the Flowsheets group, select the Flowsheet down menu for a Fixed Size Face Plate is shown here. The options
containing the Controller(s) whose Face Plate you want to open. The associated with this menu are:
Dynamic Operations group displays all the Controllers in the Turn Off - turns the Controller Off.
highlighted Flowsheet. Select the Controller Face Plate(s) you want to Auto Tune - one of three controller modes (the other two being
Manual and Cascade).
open and press the Open button. You can select multiple Face Plates at
Tuning - opens the Monitor page of the Controller property view.
a time.
Connections - opens the Connections page of the Controller
property view.
The Dynamic Operations Parameters - opens the Parameters page of the Controller
group lists all of the property view.
controllers in the selected
Flowsheet.
Innotech International, Inc. Tel: (281) 492-2774 PT. Danan Wingus Sakti Tel: 62 21 567 4573 75/62 21 567 4508 10
Katy, USA Fax: (281) 492-8144 Jakarta, Indonesia Fax: 62 21 567 4507/62 21 568 3081
International Innotech Inc. Tel: 86 10 6499 3956 Ranchero Services (Thailand) Co. Ltd. Tel: 66 2 381 1915
Beijing, China Fax: 86 10 6499 3957 Bangkok, Thailand Fax: 66 2 381 1209
Innotech International, Taiwan Tel: 886 2 809 6704 S.C. Chempetrol Service srl Tel: +401 335 60 05/06
Taipei, Taiwan Fax: 886 2 809 3095 Bucharest, Romania Fax: +401 331 34 63 or +401 322 30 69
KBTECH Ltda. Tel: 57 1 258 44 50 Soteica De Mexico Tel: 52 5 546 5440
Bogota, Colombia Fax: 57 1 258 44 50 Mexico D.F., Mexico Fax: 52 5 535 6610
KLG Systel Ltd Tel: 91 124 346962 Soteica Do Brasil Tel: 55 11 533 2381
New Delhi, India Fax: 91 124 346355 Sao Paulo, Brazil Fax: 55 11 556 10746
Logichem Process Tel: 27 11 465 3800 Soteica S.R.L. Tel: 54 1 555 5703 / 54 1 553 7597
Johannesburg, South Africa Fax: 27 11 465 4548 Buenos Aires, Argentina Fax: 54 1 551 0751
Process Solutions Pty. Ltd. Tel: 61 7 544 81 355 Soteiven C.A. Tel: 58 2 264 1873
Peregian, Australia Fax: 61 7 544 81 644 Caracas, Venezuela Fax: 58 2 265 9509
Protech Engineering Tel: +421 7 288286 ZAO Techneftechim Tel: +7 095 202 4370
Bratislava, Slovak Republic Fax: +421 7 288286 Moscow, Russia Fax: +7 095 202 4370