You are on page 1of 4

MASTS

© 2007 Hewlett-Packard Development Company


MASTS

© 2007 Hewlett-Packard Development Company


SUPPORT PANELS

SUPPORT PANEL 3

1. Fold in half on vertical dotted lines.


2. Glue two sides together.
3. Cut out on solid black lines. Make sure to cut the small lines in each of the panels.
4. Fold white tabs back.
5. Assemble as directed in ship instructions.

© 2007 Hewlett-Packard Development Company


SUPPORT PANELS

SUPPORT PANEL 1

SUPPORT PANEL 2

© 2007 Hewlett-Packard Development Company

You might also like