VISVESVARAYA TECHNOLOGICAL UNIVERSITY
BELGAUM
A Technical Seminar report on
AN EXPERIMENTAL STUDY ON STEEL FIBER
REINFORCED CONCRETE
Submitted in partial fulfillment for the award of the degree in
Bachelor of Engineering
In
MECHANICAL ENGINEERING
By
Mr. CHETHAN MV
(1NC13ME027)
Under the guidance of
Mr. VENKATESH B.K.
Assistant Professor,
Dept. of Mechanical Engineering
DEPARTMENT OF MECHANICAL ENGINEERING
NAGARJUNA COLLEGE OF ENGINEERING AND TECHNOLOGY
VENKATAGIRIKOTE, DEVANAHALLI, BENGALURU 562 164
(2016-17)
NAGARJUNA COLLEGE OF ENGINEERING AND
TECHNOLOGY
VENKATAGIRIKOTE, DEVANAHALLI, BENGALURU-562 164
Department of MECHANICAL ENGINEERING
CERTIFICATE
Certified that the project entitled AN EXPERIMENTAL STUDY ON STEEL FIBER
REINFORCED CONCRETE , Carried out by Mr. CHETHAN MV , USN
1NC13ME027 , a bonafied student of Nagarjuna College of Engineering and Technology in
partial fulfillment for the award of Bachelor of Engineering in MECHANICAL
ENGINEERING of the Visvesvaraya Technological University, Belgaum during the year
2016-17. It is certified that all corrections/suggestions indicated for internal assessment have
been incorporated in the report submitted in the departmental copy. The technical report has
been approved, as it satisfies the academic requirements in respect of project work prescribed
for the said Degree.
Signature of the Guide Signature of the Project Coordinator Signature of the HOD
Mr. Venkatesh B. K. Mr. Yogeesha H .C. Dr. Kapilan N
ACKNOWLEDGEMENT
I consider it a privilege to whole-heartedly express our gratitude and respect to each and
everyone who guided and helped us in the successful completion of this seminar.
I would like to thank seminar guide Mr. VENKATESH B K, Assistant Professor, department
of Mechanical Engineering, Nagarjuna College of Engineering and Technology for his
complete co-operation and providing me excellent guidance and to completion of Technical
Seminar.
I thank to seminar co-ordinator, Mr. Yogeesha H C, Associate Professor, department of
Mechanical Engineering, Nagarjuna College of Engineering and Technology for their
valuable guidance and all the encouragement leading me throughout until the completion of
my Technical Seminar.
I would like to thank Dr. Kapilan N, HOD, department of Mechanical Engineering,
Nagarjuna College of Engineering and Technology for his never ending co-operation and for
providing us resources and all the encouragement for the completion of my Technical
seminar.
I express my deep sense of attitude to Dr.S.G. Gopala Krishna, Principal, Nagarjuna
College of Engineering and Technology for providing an opportunity to do this Technical
seminar as a part of my curriculum in the partial fulfilment of the degree course.
I am indebted to all those who have directly or indirectly helped me in bringing out this
seminar satisfactorily in the specified duration.