Professional Documents
Culture Documents
A SEMINAR REPORT
Submitted by
To
The State Board of Technical Education Kerala in partial fulfillment of requirements for the
Award of Diploma in mechanical engineering
CERTIFICATE
This is to certify that the report entitled "SEMINAR TITLE" submitted by “Name of the
student (Reg No. ------)” to the State Board of Technical Education Kerala in partial fulfillment
of requirements for the Award of Diploma in mechanical engineering.
Guided By,
NAME OF THE GUIDE NAME OF HOD
Lecturer Head of section
Dept.of Mechanical Engineering Dept.of Mechanical Engineering
Govt. Polytechnic college, Manjeri Govt. Polytechnic college, Manjeri
DECLARATION
I undersigned hereby declare that the seminar report “Seminar Title”, submitted for partial
fulfillment of requirements for the Award of Diploma in mechanical engineering of State Board
of Technical Education Kerala is a bonafide work of mine carried out under the supervision of
NAME OF HOD (Head of Department, Mechanical).I declare that, to the best of my
knowledge, the work submitted herein does not form part of any other seminar report or
dissertation on the basis of which a degree or award was conferred on an earlier occasion to any
other candidate.
I would like to take this opportunity to thank my friends who spent their valuable time
and shared their knowledge. I thank my parents for their inspiration, moral support and
continuous encouragement while carrying out this study.
And finally I thank God almighty, without whose blessings this seminar work would
not have become reality.
Place : Manjeri
Date :
SEMINAR REPORT
ABSTRACT
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………..
(Write abstract of your seminar. Font size 12, Font “Times new roman”)
CONTENTS
1. CHAPTER 1 1
1.1 Chapter 1 Subheading 1
1.2 Chapter 1 Subheading 2
1.3 Chapter 1 Subheading 3
1.3.1 ………. 4
1.3.2 ………. 4
1.3.3 ………… 5
2. CHAPTER 2 9
3. CHAPTER 3 15
4. …………………………
5. RESULTS AND DISCUSSION 34
6. CONCLUSION 44
REFERENCES 46
LIST OF TABLES
LIST OF FIGURES
3.1 ……………………………………… 25
LIST OF ABBREVIATIONS
CHAPTER 1
INTRODUCTION
………………………………………………………………………………
………………………………………………………………………………
………………………………………………………………………………
………………………………………………………………………………
…………………………………………….
CHAPTER 2
HEADING
…………………………………………………………………………………………
…………………………………………………………………………………………
…………………………………………………………………………………………
…………………………………………………………………………………………
…………………………………………………………………………………………
………………………………………………………..
REFERENCES
[1] R.S. Mishra, Z.Y. Ma. Friction stir welding and processing. Materials Science
and Engineering R 50 (2005).
[2] …………………………………………………………………………………………