PROBLEM 3.12
Knowing that an Smmdiameter bole has been
‘dolled tough each of the safis 42, BC. and CD,
determine (@) the shaft in which the maximum
Veo =8imo Shearing tess occurs, (9) the maigade of that
sew
PROBLEM 3.28
A torque 1'= 900 N - mis applied to shaft 4B of the
_gear tain shown, Knowing that the allowable shearing
‘Gress is 80 MPa, determine the roquied diameter of
(@) shaft 4B, (8) shaft CD, (c) shaft EF.
PROBLEM 3.48
The dest of the gearand-shatt system shown
equses that sel safle ofthe same diameter be
teed for both ib and CD. Irie father requced
thot eu=60‘MPa, an thatthe angle trough
Iw tad D of shaft OD rotates not exceed 1
Keowng that G ~ 772 GPa, determine the
seqused ameter ofthe chats
PROBLEM 3.60
|A torque T is applied as shown to 2 solid tapered shaft 4B Show by
integration that the angle of twist at dis
1
9 Dace