PROBLEM 4.40
[A copper stip E,~ 105 GPa) and an shuninnan strip (E, ~78 GPa)
due bonded together 1 form the composite beam shown. Kaoving
that the beam is bent about a horizontal axis by a coupe of moment
M38 Nv determine dhe unin sess in (a) the anna
stip, 8 the eopper stip
PROBLEM 4.49,
‘umm The reinforced concrete beam shown is subjected to a postive bending
dhowr soment of 175 EN -m Knowing that the modulus of elasticity is 25 GPa
Forte concrete and 200 GPa forthe sel. determine (te sess an the
Letham Seek (the mim seer ect
PROBLEM 4.109)
4.109 Ths two forces shown are applied toa rigid plate supported by «ste!
pipe of 140 mm outer diameter and 120 mm inner diameter. Knowing
that thesllowable compressive stress s 100 MPa, determine the range
of allowable values of P.
4.128 The couple M is applied to a beam of the cross,
section shown in a plane forming an angle 8 with the vertical. Determine the
stress at (a) point A, (b) point B, (c) point D.
y
p=0
aloe
M=45N-m
15mm
15mm
7 D
2
5