som PROBLEM 7.38
Solve Prob, 7.16, using Mobr'setcle
PROBLEM 7.13 through 7.16 For the given state of sess, determine the normal and
shearing cesses after the element shown has been rotated dough (a) 25° clockwise,
@ 10° counterclockwise
PROBLEM 7.46
‘Solve Prob. 7.24, using Mohr
PROBLEM 7.24 A 18 KN vertical force is applied at D to a gear
SSP iit vl i at eA it
principal stesses and the maximum shearing stess at point H located
as showin ontop ofthe shaft.
|
SS scsirs
PROBLEM 7.70
Forthe state of sess shown, determine the maximum shearing stress when
(@) &~0.@) = 460 MPa (¢) ~-60 MPa
PROBLEM 7.117
‘The pressure tank shown has an S-mm wall thickness and but-welded
seams forming an angle i = 20° with a transverse plane. For a gage
pressure of 600 kPa, determine (a) the normal stress perpendicular to the
‘weld, (6) the shearing stress parallel tothe weld.