Professional Documents
Culture Documents
Instructions: Instructions:
1. Begin with the pocket projector switched off. On the 3. VGA to 1. Connect 4. S-video cable to 5. laptop
RCA converter, move the switch on the back of the device to S-video port
SIZE (right hand side). 2. Connect 4. S-video cable to 3. RCA male
2. Then, connect 3.2 USB power connector to 4. laptop USB port to male connector
3. Connect 3.3 male VGA connector to laptop 5. VGA port 3. Connect 3. RCA male to male connector
4. Connect 3.1 male RCA connector to yellow connector of 2. to 2. yellow Pocket Projector AV in cable
Pocket projector AV in cable 4. Connect 2. Pocket Projector AV in cable
5. Now, connect opposite end (black connector) of 2. Pocket to 1. Pocket Projector AV port
Projector AV in cable to 1. Pocket Projector AV port
Then
Then 5. Turn on your Pocket Projector by holding
6. Turn on your Pocket Projector by holding down the red down the red power button. Once the Pocket
power button. Once the Pocket Projector boots up the welcome Projector boots up the welcome screen is
screen is displayed. Press the Down Arrow button (below the displayed. Press the Down Arrow below the
OK button) once to select AV in then press the OK button OK button once to select AV in then press
7. Once your Pocket Projector is set up, on your laptop, press the OK
purple button on 3. VGA to RCA converter to fine tune the 6. Open up your graphic cards control centre:
picture. Windows Vista right click on your
8. To switch the display between your laptop screen, the Pocket desktop and select the graphic card control
Projector and simultaneous display on both devices, select the centre
keys to switch laptop screen to external monitor (consult your Windows XP go to Control Panel,
laptop manual if unsure). Display, Settings tab, Advanced button,
then select the graphic card control centre
These instructions work with the Pico VGA to RCA converter, however tab
you can use a similar converter cable in the same way. Mac OS go to Mac Help and search for
Displayport
7. In the display settings, extend your desktop
to the pocket projector as your 2nd monitor
8. Set the screen resolution for the pocket
projector to 640x480
9. If your computer cant detect the Pocket
Projector, enable forced TV functions
Note: DO NOT press any other keys on the Pocket Projector as it may confuse set up. If you do press another key, turn the Pocket
Projector off then complete Option A - Step 6 / Option B - Step 5.
How to connect to media players (mobile phones, video/music players, digital camcorders/cameras & portable media players)
1. AV port
2. Pocket projector AV
in Cable (included)
AV IN
4. Media player
3. Media-player-dedicated TV out port
TV out cable
Instructions:
1. Ensure that your media player supports TV out
2. Connect 3. media player-dedicated TV out cable to 4. media player TV out port
3. Connect male RCA connectors of 3. media player-dedicated TV out cable to the female RCA connectors of 2. Pocket
Projector AV in cable (yellow to yellow, white to white, red to red)
4. Connect opposite end of 2. Pocket Projector AV in cable to the 1. Pocket Projector AV port
Then
5. Turn on your Pocket Projector by holding down the red power button. Once the Pocket Projector boots up the
welcome screen is displayed. Press the Down Arrow below the OK button once to select AV in then press OK
6. On your media player, follow any prompts to allow the Pocket Projector to display
How To Guide
How to play PowerPoint presentations PowerPoint 2002/2003
1. Once you have connected your laptop to the Pocket Projector, on yor laptop open your PowerPoint presentation
2. On the Slide show menu, click Set Up Show
3. Under Multiple Monitors, select the Show Presenter View check box
4. In the Display Slide Show on list, select Monitor 2
5. Launch the slide show
6. Use your keyboard cursor keys or mouse track roller to switch between slides