Professional Documents
Culture Documents
4 N 35
4 N 35
Vishay Semiconductors
FEATURES
A 1 6 B Isolation test voltage 5000 VRMS
Interfaces with common logic families
C 2 5 C
Input-output coupling capacitance < 0.5 pF
NC 3 4 E
Industry standard dual-in-line 6 pin package
Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
21842
APPLICATIONS
i179004-5
AC mains detection
Reed relay driving
DESCRIPTION Switch mode power supply feedback
Each optocoupler consists of gallium arsenide infrared LED Telephone ring detection
and a silicon NPN phototransistor.
Logic ground isolation
AGENCY APPROVALS Logic coupling with high frequency noise rejection
Underwriters laboratory file no. E52744
BSI: EN 60065:2002, EN 60950:2000
FIMKO; EN 60065, EN 60335, EN 60950 certificate no. 25156
ORDER INFORMATION
PART REMARKS
4N35 CTR > 100 %, DIP-6
4N36 CTR > 100 %, DIP-6
4N37 CTR > 100 %, DIP-6
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Switching time (1) VCC = 10 V, IC = 2 mA, RL = 100 ton, toff 10 s
Note
(1) Indicates JEDEC registered values.
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specied
1.4 1.5
Normalized to:
1.3 VCE = 10 V, IF = 10 mA, TA = 25 C
VF -Forward Voltage (V)
TA = - 55 C
NCTR - Normalized CTR
1.0
0.5
0.9
TA = 85 C NCTR(SAT)
0.8 NCTR
0.7 0.0
0.1 1 10 100 0.1 1 10 100
i4n25_01 IF - Forward Current (mA) i4n25_03 IF - LED Current (mA)
Fig. 1 - Forward Voltage vs. Forward Current Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5 1.5
Normalized to: Normalized to:
VCE = 10 V, IF = 10 mA, TA = 25 C VCE = 10 V, IF = 10 mA, TA = 25 C
NCTR - Normalized CTR
1.0 1.0
TA = 25 C TA = 70 C
0.5 0.5
NCTR(SAT) NCTR(SAT)
NCTR
NCTR
0.0 0.0
0 1 10 100 0.1 1 10 100
i4n25_02 IF - LED Current (mA) i4n25_04 IF - LED Current (mA)
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current LED Current
1.5 1.5
Normalized to: Normalized to:
1.0 1.0
TA = 85 C
0.5 0.5
25 C
NCTR(SAT) 50 C
NCTR 70 C
0.0 0.0
0.1 1 10 100 0.1 1 10 100
i4n25_05 IF - LED Current (mA) i4n25_08 IF - LED Current (mA)
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. Fig. 8 - Normalized CTRcb vs. LED Current and Temperature
LED Current
35 10
Normalized to:
ICE - Collector Current (mA)
25
50 C 1
20
70 C
15
25 C 85 C
0.1
10 Nib, TA = - 20 C
Nib, TA = 20 C
5 Nib, TA = 50 C
Nib, TA = 70 C
0 0.01
0 10 20 30 40 50 60 0.1 1 10 100
i4n25_06 IF - LED Current (mA) i4n25_09 IF - LED Current (mA)
Fig. 6 - Collector Emitter Current vs. Fig. 9 - Normalized Photocurrent vs. IF and Temperature
Temperature and LED Current
105 1.2
70 C
ICEO - Collector Emitter (nA)
4
10
NhFE - Normalized hFE
1.0
103 25 C
102 - 20 C
VCE = 10 V 0.8
101 Normalized to:
IB = 20 A, VCE = 10 V,
Typical TA = 25 C
100
0.6
10- 1
10- 2 0.4
- 20 0 20 40 60 80 100 1 10 100 1000
i4n25_10 Ib - Base Current (A)
i4n25_07 Tamb- Ambient Temperature (C)
Fig. 7 - Collector Emitter Leakage Current vs. Temperature Fig. 10 - Normalized Non-Saturated hFE vs.
Base Current and Temperature
1.5
NhFE(sat) - Normalized Saturated hFE
- 20 C VO
0.5
VCE = 0.4 V IF = 10 mA
0.0
1 10 100 1000
i4n25_11 Ib - Base Current (A) i4n25_14
Fig. 11 - Normalized hFE vs. Base Current and Temperature Fig. 14 - Switching Schematic
1000 2.5
tPLH- Propagation Delay (s)
IF = 10 mA, TA = 25 C
tPHL - Propagation Delay (s)
10 1.5
tPLH
1 1.0
0.1 1 10 100
i4n25_12 RL - Collector Load Resistor (k)
IF
tD
VO tR
tPLH
VTH = 1.5 V
tPHL tS tF
i4n25_13
7.62 typ.
7.12 0.3
6.5 0.3
3.5 0.3
4.5 0.3
4.5 0.3
2.8 0.15
0.5 0.1
6 5 4
7.62 to 9.5 typ.
14771_2 1 2 3
PACKAGE MARKING
4N35
V YWW 24
21764-24
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.