Professional Documents
Culture Documents
itim Serisi
2
This Software Manual has been developed for use with the referenced Software. Use of the
Software, and use of this Software Manual are governed by a License Agreement. Among other
provisions, the License Agreement sets certain warranties for the Software and this Manual,
disclaims other warranties, limits recoverable damages, defines permitted uses of the Software,
and determines whether you are an authorized user of the Software. All information set forth in
this manual is provided with the warranty set forth in the License Agreement. Please refer to the
License Agreement for important obligations and applicable limitations and restrictions on your
rights. Trimble does not guarantee that the text is free of technical inaccuracies or typographical
errors. Trimble reserves the right to make changes and additions to this manual due to changes
in the software or otherwise. In addition, this Software Manual is protected by copyright law and
by international treaties. Unauthorized reproduction, display, modification, or
distribution of this Manual, or any portion of it, may result in severe civil and criminal penalties,
and will be prosecuted to the full extent permitted by law.
Tekla, Tekla Structures, Xsteel (Old name), Tekla BIMsight, BIMsight, Tekla Civil, Tedds, Solve,
Fastrak and Orion are either registered trademarks or trademarks of Trimble Solutions
Corporation in the European Union, the United States, and/or other countries. More about
Trimble Solutions trademarks: http://www.tekla.com/tekla-trademarks . Trimble is a registered
trademark or trademark of Trimble Navigation Limited in the European Union, in the United
States and/or other countries.
retilecek Model
Not: Bu TEKLA STRUCTURES modeli statik olarak hesaplanm olmay p al rma iin d nlm
konstrktif bir yap r. a edilmek ve uygulamak iin kullan lamaz. De tirilip ve hesaplan p
kullan labilir. Sorumluluk uygulayana ve in a edene aittir.
1. Tekla Structures 2016 ikonuna ift t klan r. ekil 1deki diyalog kutusundan Environment: Default,
ekil 1. ekil 2.
2. New blmne t klan r. ekil 2deki Name blmne Model1 ismi yaz r. Template Steel Basic
seili iken Create butonuna bas larak Model1 isminde yeni bir model olu turulur.
3. Ekranda grlen gridler zerine ift t klan r ve ekil 3te verilen grid ayarlamalar yap r.
5. Modify butonuna bas larak default ayarlar yla gelen gridler dzenlenmi olur.
6. Betonarme kolonlar yerle tirmek iin, Concrete mensnden Column butonuna ift t klan r.
ekil 7de gsterilen Concrete Column Properties diyalog kutusu a r. Attribute blmnden
Profile 400*1000, Position blmnden Horizontal: Left olarak ayarlan r. Position blmnden
ekil 3 ekil 4.
8. ekil 4
4deki Save As blmne farkl ayarlar iin farkl isim
isimler verilerek daha sonra kullan lmak zere
PUCU:
Tekla Structures program nda genel bir zellik olarak, diyalog kutular n st taraf nda bulunan
Save, Load ve Save As komutlar , yap lacak ayarlar n istenen isimlerle kaydedilmesi ((Save As),
),
yap lacak de ikliklerin kaydedilmesi ((Save)) ve istenen ayarlar n sonradan a larak kullan lmas
(Load)) iin kullan labilir.
Ayarlar a rd ktan sonra kullan labilmeleri iin Apply komutuna basmay unutmay n
11. Gridlerin zerine tek t k yap larak seim yap rr.. Maus sa klik ile Create View
iew ve sonra Along Grid
Lines
ines komutuna t klan r. Veya View mensnden New View komutuna t klan r. ekil 6 gsterilen
13. ekil 6daki View diyalog kutusunun sa blmden bulunan Plan +4.0m ve Plan +6.0m ift t klanarak
ekil 5. ekil 6.
14. 2 nolu aks zerinde betonarme kiri olu turmak iin Concrete mensnden Beam komutuna ift
klan r. Beam Properties diyalog kutusu a r. Burada, Attributes blmnde Profile: 600*400,
Position blmnde On plane: Left, Rotation: Top, At depth: Behind= 200 yaz r.
16. Beam komutundayken, A aks zerindeki kolonun st kenar ile, D aks zerindeki kolonun alt
17. Teklan n sol blmnde bulunan Windowa t klan r. Oradan Plan +6.0m t klanarak 6m
plan dzlemi a r.
19. Plan +6.0m dzleminde d eme olu turmak iin Concrete blmnden Slab komutuna ift t klan r.
20. Name: UstDoseme, Thickness =200, Materials: C25/30, Position blmnde, Indepth: Behind
seenekleri seilir.
21. Views diyalog kutusunun sol blmden Grid A zerine ift t klan r ve sa tarafa geirilir. ( ekil 7)
22. Perpektif bir grnt ekil 8de gsterilmi tir.
ekil 7. ekil 8.
23. Ctrl+ 2 ile effaf moda geilir.
25. Steel blmnden Beam komutuna ift t klan r ve a daki ayarlamalar yap r. Name: BoruKiris,
Profile: CHS193.7X8.0, Materials: S235JR, Class: 3; On Plane: Middle, Rotation: Front, At depth:
Behind seilir.
27. nce +4.0 m nin 2 nolu aks zerine, sonra 5 nolu aks noktas na t klanarak elik boru olu turulur.
28. Edit mensnden Point ve alt blmden t klan r. Distance -200 yaz r,
Apply Ok bas r. nce +4.0m kotu ve 2 aks kesi imine, sonra +6.0m seviyesindeki 2 nolu aksa
Boruya ift t klanarak u ayarlar girilir; Name: BoruAsk , Profile: CHS114.3X5.0, Mate
Materials:
rials: S235JR,
ekil 9.
31. Ctrl+ I klan r. 3d grntsne geilir. Ctrl+P ile perpektif grntden kesit d
dzlem
zlem grntsne
geilir.
PUCU:
Ctrl+P ile ayn grntnn perspektif ve dzlem halleri aras nda gei yapabilirsiniz.
Ctrl+R ile grnty belirlenecek bir nokta etraf nda dndrebilirsiniz.
34. dY=2000
dY= ve Number of Copies: 3 yaz r.
37. Ctrl+ I komutuna bas r ve +4.0m kotu ift t klanarak sa tarafa geirilir
geirilir.
38. Steel blmnden Beam komutuna ift t klan r ve a daki ayarlamalar yap r. Name: BoruYan,
Profile: CHS193.7X8.0, Materials: S235JR, Class: 7; On Plane: Middle, Rotation: Front, At depth:
Behind seilir.
40. nce A ve 3 nolu aks kesi imi, sonra B ve 3 nolu aks kesi imi zerine t klan r. Yatay profil olu turulur.
41. Olu turulan profil zerine sa klik yap r. Copy Special ve ard ndan Copy Linear seilir. dX= 1250 ve
42. 6 nolu aks zerindeki profile ift t klan r ve On Plane: Left olarak dzeltilir. Modify komutuna bas r.
43. Ekrana t klan r. Sa klik Interrupt t klan r son komut haf zadan temizlenir. Bunun iin klavyede
44. Son olu turulan Boru Yan profillerin hepsi seilir. Copy Special komutundan Copy Linear seilir. dY=
2000 ve Number of Copies: 2 yaz r. Btn dikey profiller olu turulur. Son grnt ekil 10da
gsterilmi tir.
ekil 10
TEKLA STRUCTURES (Xsteel)
(Trimble Solutions)
Da m ve Destek: