Professional Documents
Culture Documents
E D I T I O N
table of contents
▲
Planning and Design.....................................................4
Pond Construction.........................................................6
Waterfall Construction................................................10
Pumps............................................................................16
Feeding Fish.................................................................26
Keeping Fish................................................................28
3
where to begin
▲
Choosing a location
Locate it where you will enjoy it
Your first consideration in choosing a location for your pond is your own enjoyment. You may
want to place it where you can view it from rooms where you spend a lot of time, such as the
kitchen or family room. Another good choice is near your deck, patio or other outdoor area
where you relax and entertain.
Importance of sunlight
It is essential for healthy plant life, but too much can lead to an overabundance of
algae and unattractive green water. Typically, the best location for a water garden is
one that receives five to six hours of sunlight a day.
And while trees can provide a beautiful environment and help shade a pond from
too much direct sunlight, roots make digging difficult and leaves can fall into the
pond, clogging filters and robbing the water of oxygen as they decompose.
4
designing your pond
▲
Size of your pond Reflecting your personal
Once you have decided on a location, you tastes and surroundings
can design the size and shape of your Formal gardens are complemented by
pond. As a general rule, bigger is better. geometrically shaped ponds with bricks
Make your pond at least 30 square feet or flat paving stones around the
with a minimum depth of 18 inches. perimeter. For informal gardens,
Ponds of this size will be more ecolog- ponds can have more natural, free-
ically balanced, retain more stable form shapes bordered with stones of
temperatures and provide greater various sizes and shapes. Avoid tight
movement for fish. curves or intricate shapes. These waste
lining material, reduce water capacity
and create stagnant areas where solid
wastes accumulate.
5
building a pond, step by step
▲
Once you have planned all the details of your water garden, you can begin building it.
The basic construction consists of six simple steps.
6
Layout
1 Use a heavy garden hose or rope to outline the edges of the pond. Place short
stakes at one-foot intervals to retain the shape.
Excavation
Excavate the pond area. You may choose to create 2 or 3 tiers in your pond, the top
one for rock edging and the others for plant shelves. Deep areas should be between
2 18 and 40 inches deep, depending on the climate, and shallow areas between 4 and
12 inches. In most parts of the U.S., 18 to 24 inches is generally a good depth. To
keep the surface of your pond level, stake out strings lengthwise and widthwise
and use a line level.
3 entire pond with 1 to 2 1/2 inches of sand, then positioning your TetraPond
Underliner to protect the main liner from root and rock punctures. Carpet padding
and newspaper are also underling options, but they will not provide the same
degree of protection.
7
Liner installation
Unfold the liner on your lawn or other flat surface nearby. With at least two people on
either side of the liner, pick it up and walk to slide it over the pond. Let the liner drop
4 into the pond, making sure it extends evenly, well beyond the perimeter. Minimize the
number of small folds by pulling or tucking them into large folds. Hold the liner in
place with bricks or rocks and fill the pond with water. This will cause the liner to
conform to the shape of the pond.
Rock borders
If you choose, build a rock border around the edges, allowing rocks to overlap the
water by one to two inches. To achieve a natural look without the liner showing,
edging
5 make sure the water meets the rock edging. To do this, extend the liner up behind the
edging (see illustration) and backfill with soil or rocks to create a barrier that holds
the liner upright and prevents both pond drainage and garden runoff. Only after the
plant shelf
pond is completely filled and rock edging is in place, trim excess liner.
liner
6 several days and add fish a few at a time over the course of 30 days to ensure that
your pond and filter are biologically ready to support aquatic life. Landscape to
suite your taste and environment.
8
flexible pond liners
▲
The latest development in flexible pond liners is a technologically
advanced TetraPond liner reinforced with Xavan® non-woven fibers
by DuPont®. This superior liner is tear-resistant and much
stronger than conventional liners, yet weighs
about one-third as much. TetraPond liners
carry a 25-year limited guarantee and Advanced
UV-resistant polymers
are available in a variety of popular
pre-cut sizes or in bulk for custom
Reinforced core of
sizing. EPDM liner made from butyl DuPont Xavan fibers ®
Example
The sight and sound of moving Excavating header pool and tiers
water add an extra dimension to
Begin by laying out the site for the waterfall.
your garden and enhance the
The header pool can be located at the top
appeal of your pond. Moving of a natural slope, or you can use the soil
water helps oxygenate the pond, excavated from the main pond as the
and waterfalls also provide a foundation of the waterfall. Mark the path
biofiltration benefit as helpful and the tiers with a pair of stakes at each
bacteria become embedded in step. Starting at the base of the mound,
the stones. Building a waterfall excavate the waterfall using the stakes
as guides. Make each step roughly horizon-
isn’t difficult if you follow these
tal and the sides roughly vertical. If the soil
simple steps. is not holding its shape, allow it to settle or
use a tamper. At the top of the waterfall,
create a header pool to house the inlet pipe
and form the top tier.
10
2 3 4
Installing the liner Laying flat rocks and edging Routing plumbing and testing flow
Cut a piece of liner large enough to cover Place the first flat rock on the bottom Secure flexible tubing to the pump
the whole waterfall with a 12-inch overlap tier, overlapping the pond edge by 2 to 3 outlet with a stainless steel hose clamp.
on all sides. Be sure the waterfall liner inches. Next, set a stone flat against the Submerge at the furthest point from the
overlaps the pond liner. With the liner in back of that tier. The backing stones waterfall. Route the tubing over the side of
place, run water over the fall and make should be slightly higher than the rise of the pond, hiding it under perimeter stones
sure there are no leaks. the tier. Lay the next rock horizontally on without pinching it. Avoid sharp bends so
the next tier so it overhangs the first by the tubing does not kink and reduce flow.
2 to 3 inches. Continue until you have You may want to route and bury the tubing
reached the top, laying the final rock flat in inexpensive flexible corrugated drainage
in the bottom of the header pool. Edge pipe to protect it. To achieve the desired
stones should be placed at each tier pattern and sounds for your waterfall,
along the sides of the falls. Make sure select and position stones while the water
the edge stones are taller than the is flowing over them. Small pebbles will
surrounding earth. create a trickling effect while large rocks
mimic the rush of rapids. Make sure all
flowing water is confined within the water-
fall liner. Landscape to suit your tastes.
11
installing an here are some examples:
▲
▲
▲
This grid may be used to determine the
surface square footage and the volume
PF1 which you will need to determine the
Biofilter size of your pump.
UV1 Clarifier
1. Measure the length and width of your
pond, and sketch the approximate
shape on the grid. Each square
represents 1 square foot.
2. Total the squares for your square
Use 1” inside diameter tubing footage.
to connect all components Back to pond
3. Multiply square footage by the average
depth (ft.) This is your cubic footage.
Extra flow is diverted directly UV1 Clarifier Use 1” ID PF2 4. Multiply cubic footage by 7.5. The
to waterfall or stream tubing to Biofilter result is your liquid volume in gallons.
connect clarifier
to filter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1
2
Flow Control Valve 3
13
tying it all together
▲
guide to building your own system These essential items are readily available at your
▲
Tubing
1. How many gallons your pond holds (see “to figure area and volume” on page 13). Flexible, kink-resistant
2. Choose the proper size pump – three considerations: tubing available in a
variety of diameters to
a. The 50% circulation rule – choose a pump that circulates a minimum of 50% of the connect pump, biofilters, UV
pond volume per hour. clarifiers, waterfalls and other water features.
b. Determine the height and width of desired waterfall spillover (see page 17).
Hose clamps
c. Choose a pump large enough to power your filter and UV clarifier (see page 17). to secure your
hose connections.
3. Measuring flow - An easy way to check flow volume: simply time how long it takes (total
seconds) to fill a 5-gallon bucket. Divide 3,600 by the total seconds, then multiply result by 5.
Example: 3600 (seconds in an hour) ÷ 15 seconds (fill time) x 5 gallons (bucket size) = 1200 gph (flow rate) Teflon tape
4. Choose biofilter type and size - Gravity Flow or Pressure Filter (see “keeping your pond clean” To ensure a good seal on
threaded connections.
on page 22 for more information on filter types).
5. Choose the proper size UV clarifier (see chart on page 15).
T-fitting
6. Choose the proper hose diameter - Use the largest inside diameter that equipment can To divert water flow to
accommodate to connect equipment. Equipment inlet/outlet sizes are listed right on the a waterfall or piece of
equipment.
packaging. If you are in the pre-planning stages, visit our Web site at www.tetra-fish.com for
a complete listing of all TetraPond equipment specifications and capacities.
Reducer fitting
7. Determine hose length - An easy way to determine length of tubing is to use a string to To connect hoses
consecutively link the equipment (pump, filter, clarifier, etc.), follow the terrain and make of different inside diameters.
the most direct path. Measure string for length. Always purchase an extra foot or two.
Flow control valve
8. Determine if flow control valve, T- fittings and/or reducers will be needed (see “tying it Adjustable valve used to
all together” at right). increase or reduce water
14 flow volume.
matching the right equipment
▲
Use this handy reference chart to help you match the proper pump to the proper filter/UV clarifier for your pond. Although your pond application
may vary, this will give you the guidelines and ranges to help you make the combination that’s right for you. If you are matching a pump with a flow
greater than the flow of the other components, a control valve is recommended to reduce flow, or use in conjunction with a T-fitting to divert excess
flow to a water feature.
RECOMMENDED PUMPS
GRAVITY FILTER & Recommended DynaMag 500 DynaMag 750 DynaTec 1100 DynaTec 1500 DynaTec 2250 OFX2000 OFX3000 OFX4000
UV CLARIFIER COMBINATIONS Pond Range 500 gph max 750 gph max 1100 gph max 1500 gph max 2250 gph max 2000 gph max 3000 gph max 3870 gph max
*Expect approximately 40% flow loss Use the DynaMag flow control Use an auxiliary flow control
No flow control valve needed 15
through the pressure filter. valve with these combinations with these combinations
selecting the proper pump
▲
▲
Water flow and head pressure.
To choose the proper pump for a waterfall, you first need to understand pump head height. This is the water pressure generated by a pump.
The maximum pumping height is the height a pump will raise water straight up resulting in zero gph of water flow at the top. As the height of any
pump discharge increases, the flow will decrease.
Calculating your pump size.
To calculate the pump size for your waterfall, decide the width of the spillover you want and determine the vertical distance from the waterfall to the
pond surface. Every inch of spillover width requires about 100 gph of water flow at the height of the waterfall.
See flow charts on packaging for water volume flow specifications at different pumping heights.
Max. flow 250 gph 500 gph 750 gph Max. flow 1100 gph 1500 gph 2250 gph Max. flow 2000 gph 3000 gph 3870 gph
gallons/hr. gallons/hr. gallons/hr.
Up to Up to Up to Up to Up to Up to Up to Up to Up to
Pond size Pond size Pond size
500 gal. 1000 gal. 1500 gal. 2200 gal. 3000 gal. 4500 gal. 4000 gal. 6000 gal. 8000 gal.
Energy 15 watts 50 watts 75 watts Energy 106 watts 138 watts 190 watts Energy 115 watts 240 watts 260 watts
consumption consumption consumption
Energy cost $ .90 $ 3.00 $ 4.50 Energy cost $ 6.36 $ 8.28 $ 11.40 Energy cost $ 6.90 $ 14.40 $ 15.60
per month* per month* per month*
*Based on average U.S.A. Residential rate of $0.0833 Kilowatt hour rate. Source: Energy Information Administration (Nov.2002). Local rates may vary.
17
DynaMag series TM
▲
2-Year
Limited Warranty
▲
Low energy consumption.
Reliable magnetic drive technology 120 VAC 60 Hz. UL Epoxy encapsulated.
▲
& cUL approved Protects motor from water
Like all TetraPond pumps, the DynaMag intrusion & overheating
series was designed by water garden
▲
experts from the ground up. They are a Sponge included
(use with fountain
dependable, economical choice for the spray head)
small to mid-sized pond. All DynaMag
Durable ceramic shaft for
▲
pumps are protected by a two-year low friction and long life
warranty and come complete with
fountain assembly, including an
adjustable stem, flow diverter outlet, Snap-on-and-off pre-filter.
▲
Large surface area reduces
and spray and bell pattern heads. clogging and maintenance
DynaMag 250
DynaMag 500
DynaMag 750
18
DynaTec series TM
3-Year
▲
Limited Warranty
▲
Reliable Induction Motor
▲
Durable ceramic shaft and bearings
performance pumps ideal for larger
▲
for low-friction and long life Fully-epoxy encapsulated.
Protects motor from
ponds, as well as waterfalls, streams
water intrusion
and large fountains. Engineered
No seals to wear out.
▲
with proven European asynchronous No oil used-
impeller technology, DynaTec pumps environmentally safe
provide superior head height and
flow. All DynaTec pumps are
▲
warranted for three years. Uni-directional
impeller for increased
flow & pressure
DynaTec 1100
DynaTec 1500
▲
Easy to remove
pre-filter
DynaTec 2250
19
The OFX pump’s innovative impeller design sends debris directly to your pond’s external filter.
OFX series
▲
3-Year
Limited Warranty
The debris-handling pumps
Rugged debris-handling impeller can pass
▲
3/8” gravel without damage to blades.
TetraPond’s OFX Open-Flow Debris Handling
Pump is a revolutionary new concept in Ceramic shaft & bearing–
▲
pumping. Most pumps contain a pre-filter low friction for long life.
to trap debris. The OFX models instead Multi-directional
▲
have an innovative cage design with large outlet avoids
▲
Reliable disc motor technology.
Only one moving part. kinked hose.
holes throughout the surface that allow
No magnet to degrade.
debris up to 3/8 inch in diameter to pass
through the pump.
Motor protected against
▲
▲
▲
GP-125
Food
Fish Wastes
Decomposers
Mineralization by
Decaying Plant
Filtration is an essential part of a healthy water garden, removing impurities from Heterotrophic
Bacteria Fragments and Plants
Uneaten Food
the water, helping to preserve aquatic life and enhance your enviornment. Biological Filtration Nitrates
Ammonia
(toxic) Nitrate
There are two basic filtration methods: biological and mechanical. NH4+ / NH3 Nitrite
Bacteria Bacteria
Water
Changes
Nitrites
Mechanical filtration uses foam filters to physically trap dirt and debris.
Pressure filters can accommodate larger ponds and come with the option
of a built-in UV clarifier.
▲
Easy one-step back-flush valve
reverses flow for cleaning
Biological filtration uses natural biological processes to improve the
sponges and bio-media
water. They create an environment for beneficial bacteria to
colonize. This beneficial bacteria converts harmful ammonia
Robust latches and o-ring seal
▲
from waste products into nitrates, which are relatively harmless for leak-free performance
to fish and beneficial to plants. The best pond filters offer a
▲
combination of mechanical and biological filtration. Built-in GreenFreeTM UV clarifier
(some models). Non-UV units
can be upgraded with UV kits
Mechanical
▲
▲
filtration
through media to convert harmful ammonia
foam filters into relatively harmless nitrates
22
the little extras
▲
ClearChoice Pressure Filters TM
▲
Pond size 1500 gal. 2500 gal. 4000 gal. 1500 gal. 2500 gal. 4000 gal.
1 41 Discharge and nitrate removal — During the discharge and nitrate removal stage, purified
water is discharged to the pond where aquatic plants can remove nitrates.
2
▲
Biofilter Positioning
3 Note: The discharge from Tetra biofilters can be routed to the waterfall pond or into
the water stream. Because the water flows by gravity out the bottom of the biofilter,
4 it must be positioned higher than the waterfall. If this is difficult to achieve, consider
a flow control valve and a “Y” or “T” connector in your tubing or use the pump diverter,
pumping a portion of the water to the biofilter and the rest to the waterfall. You may
also want to use two separate pumps, one for the waterfall and one for the biofilter.
24
fighting green water
▲
®
Aqua-Zyme
The most common complaint of new and experienced pond enthusiasts alike is green water. Green water Full-season water
is caused by blooms of single-celled algae, which not only cloud the water and obscure fish viewing, but clarifier containing
also rob the water of valuable oxygen and release harmful pollutants. These organisms are so tiny, they natural beneficial
bacteria and
pass through even the finest filter.
enzymes that
consume organic
matter in
the pond.
GreenFreeTM UV Clarifiers
▲
TetraPond’s dependable clarifiers use ultraviolet light to destroy the reproductive ability of
suspended algae. Dead algae will clump together into particles large enough to be removed by filtration,
leaving the pond cleaner and clearer. GreenFree Clarifiers usually remove heavy algae blooms within five
days and keep the pond algae-free. They are easy to conceal, durable and install in minutes. For maximum ®
operating efficiency, replace the UV bulb every spring, at the start of the pond season.
AquaRem
Remedies cloudy
and discolored
water by clumping
Model UV Mini UV 1 UV 2 UV 3 contaminants so
Max. flow they can be
gallons/hr.
330 gph 900 gph 2200 gph 4400 gph removed by
the filter.
Pond size 660 gal. 1800 gal. 4400 gal. 8800 gal.
Energy
consumption 5 watts 9 watts 18 watts 36 watts
25
feeding your fish
▲
The vivid oranges, reds and whites of Koi and goldfish are the result of a complete and
balanced diet. The right food ensures vibrant colors and proper body shape. Because Koi and
goldfish do not have teeth or stomachs, easy digestibility is of prime importance. Highly
digestible foods minimize waste, enabling filtration systems to operate more efficiently
and keeping the pond ecosystem healthier.
Pond Sticks
Koi Vibrance
below 50OF in the Fall, the fish’s metabolism will Variety Blend
Koi Growth
slow. Switch to TetraPond’s most digestible food,
SPRING
50°F
FALL
10°C
Spring & Fall Diet. Stop feeding entirely when the
Spring & Fall
water temperature is less than 39OF. In the Spring, Diet
▲
with balanced nutrition. TetraPond Food Sticks have revolutionized the fish food
industry with the Soft Sticks advantage: they’re 100% food made with the highest
quality ingredients and no filler, lightweight, and quickly soften on contact with
water to ensure easy digestion. And because they float longer, you can enjoy
watching your fish feed at the water’s surface.
▲
Premium nutrition for Premium nutrition with Premium blend of 3
goldfish and Koi. natural color enhancers. foods to enhance vitality.
An ideal maintenance A highly nutritional diet Pond Sticks: an ideal,
diet that provides nutrition that brings out vibrant basic diet.
for energy, longevity, and reds and yellows on Koi Koi Vibrance: enhances
overall health. and ornamental goldfish. natural coloration.
Wheatgerm Sticks: for
health and vitality.
Koi Growth
▲
▲
▲ Spring & Fall Diet Flaked Fish Food
Premium high Wheatgerm transitions fish The primary meal for
protein food for in and out of winter. goldfish and small Koi.
rapid fish growth. Wheatgerm’s exceptional
A high protein diet digestibility at low tempera-
containing essential tures is very important since
amino acids that help fish metabolism and the
younger fish grow. pond’s ammonia-reducing
biological activity are greatly
diminished in colder months. 27
fish identification & care
▲
An almost endless variety of colorful fish can be kept in the garden pond to add interest and beauty. Proper planning will increase your chances for
healthy fish. Simple precautions, such as testing water quality, neutralizing chlorine when adding water, and protecting against common diseases
can assure your pond fish remain in optimum health.
Makes tap water safe for pond fish by neutralizing DesaFin protects goldfish and Koi against infection by
chlorine, chloramine and heavy metals as well as destroying harmful bacteria, parasites and fungus. while
providing a protective colloid coating for fish. KoiVital replenishes vitamins and minerals, promotes
greater vitality, circulation and reproductive activity.
shubunkin goldfish
▲ ▲ ▲
koi
Perfect for water gardens, the A favorite from everyone’s childhood, Prized world-over for their vivid coloration, striking patterns and longevity,
goldfish-shaped shubunkin features these larger, hardy goldfish do well in Koi are actually the colored variety of the common carp. There are many colors,
a stunning pale blue background poorer water conditions. Known as shapes and types to choose from.
with flecks of red, black and blue. good swimmers, despite their short fins.
Many varieties to choose from.
28
aquatic plant types & care
▲
Controlling algae: the hidden beauty of aquatic plants.
If your pond is built properly and you’ve maintained the right balance between plants, fish and scavengers, controlling algae problems isn’t
difficult. Algae problems in water gardens are usually the result of excess nutrients in the water. One simple way to control excess nutrients is with
aquatic plants. Plants take nitrates from the water, which deprives the algae of the nutrients it needs to live. Surface plants also provide shade to
the pond, further reducing algae.
29
educational resources from your water garden experts
▲
30
frequently asked questions
▲
How often should I clean my filter? Is there anything I can do to
ease maintenance chores?
At the first sight of reduced water flow. If your pump has
Is it safe to use untreated tap water in my pond?
a pre-filter, check to see if it’s clogged and clean it. Rinse Of course your pond will require some attention throughout
Probably not. Most tap water contains chlorine, your biofilter sponges, mats or filter pads thoroughly the year, but there are some simple steps you can take to
chloramines and heavy metals that are harmful to fish. with pond water. Consult your biofilter user guide for reduce the amount of time spent on maintenance.
In order to make your tap water suitable for your pond, more details. • Purchase a filter that is large enough to do the job. Over-
you need a water treatment like TetraPond AquaSafe,
filtration is not harmful, but under-filtration will lead to
which neutralizes and/or removes dangerous additives
poor water quality, extra work and frustration.
and provides a protective colloid coating for the fish. What do I do with my pond during the winter?
• Choose an external filter like a ClearChoice Pressure
In most parts of the U.S., it is best to leave your fish in
or Gravity Flow Biofilter. External filters are easier to
the pond during the winter, providing the depth of the
How do I get rid of green water in my pond? maintain because you do not have to enter the pond
pond is adequate. Ice will form on the top, but the water
There are a number of ways to deal with green water. to clean the foam pads.
underneath will not freeze.
Most involve denying algae the sunlight and/or nutrients • A clean pond starts at the surface. Make sure you have
they need to survive. At first frost, simply disconnect the filtering equipment
a skimmer net to remove leaves and debris from
and the UV clarifier. Stop feeding your fish when the water
• Shade as much of the water as possible with lilies and the pond.
temperature falls below 39°F.
other aquatic plants. Floating plants prevent sunlight • Pond netting prevents leaves and debris from reaching
from feeding the algae. Always provide an opening in the ice to allow for gas
the pond surface and protects fish from predators.
exchange. Without this hole, toxic ammonia can build up.
• All aquatic plants absorb nutrients from the water that To maintain an ice-free hole, leave the pump operating • Using the OFX pump to remove debris from the
would otherwise be used by algae. with the fountain head and tubing removed. The pump pond without clogging will significantly reduce
should be positioned so the discharge keeps water pump maintenance.
• Feed your plants only as directed. Fertilizer tablets can
be inserted into the soil so the fertilizer is absorbed by moving at the surface. Electric pond de-icers, like our • UV clarifiers work continuously to keep
the plant roots with very little released into the water energy-efficient Winter Island, will also achieve this. Do your pond free of algae without
for algae to consume. not break holes in the ice, since this will send shock waves repeated application of chemical
that can injure or kill the fish. or biological treatments.
• Use clarifying water treatments like Aqua-Zyme
and AquaRem. In the spring, when the water temperature reaches
39°F, resume feeding with TetraPond Spring & Fall Diet,
• Add a UV clarifier. Exposure to the correct wavelengths but only after you have re-established filtration. When
of UV light disrupts the reproductive capability of single- water temperature reaches 50°F, you can use any of
cell algae. Once it dies and clumps together, the external TetraPond’s fish foods. Begin feeding two weeks
filter can remove it. after you have re-established filtration. 31
Look for the TetraPond Water
Gardening Center featuring our
complete line of pond products. To
locate the TetraPond retailer nearest
you, call 1-800-526-0650, or visit our
web site at www.tetra-fish.com.