Professional Documents
Culture Documents
Hdpe PDF
Hdpe PDF
HDPE Pipe
1 Fabco Plastics is the leading Canadian
supplier of industrial plastic pipe including
HDPE. Our dedicated and knowledgeable
sales staff can provide high quality
2
technical information and accurate
project quotations on a timely basis.
Fabco provides HDPE pipe to 63, custom
fabricated butt fusion fittings, butt fusion
equipment and easy to use electrofusion
fittings to 12.
The standard length of HDPE pipe is 50
3
feet, in sizes above 2 in diameter with
longer lengths available on request.
Coiled pipe is available in diameters up to
3 and is available in 250 and 500 foot
lengths. Larger pipe sizes and coil lengths
are available on special request.
4
Features:
HDPE Pipe is Leak Proof HDPE Pipe is Lightweight and Impact
6
exfiltration problems experienced with other especially in cold weather installations when
pipe joining methods. Since fused joints are other pipes like PVC are prone to cracks and
self-restraining, costly thrust restraints or thrust breaks.
blocks are not required. HDPE Pipe is Easy to Install
HDPE Pipe is Corrosion and Chemical Flexibility and leak free joints allow for unique
Resistant and cost effective methods of installation of
7
HDPE pipe will not corrode, tuberculate or HDPE pipe that the rigid Concrete, PVC and
support biological growth. It is the material of Ductile Iron pipes cant use. These alternate
choice in harsh chemical environments. HDPE installation methods (Horizontal Directional
pipe has a smooth ID and maintains its flow Drilling, Pipe Bursting, Sliplining, Plow and
capability over time - Hazen Williams C Factor Plant, Submerged or Floating Pipe) can
remains 150, even after years of use. save considerable time and money in most
8
HDPE Pipe is Flexible and Fatigue applications.
Resistant HDPE Pipe is Cost Effective and
HDPE pipe can be bent to a radius 25 times Permanent
the nominal pipe diameter. This can eliminate HDPE pipe is cost effective and has long term
many fittings required for directional changes cost advantages due to its physical properties,
compared to piping systems made from other leak free joints and reduced maintenance costs.
9
materials. In addition, the flexibility of HDPE The Plastics Pipe Institute estimates the service
pipe makes it well suited for dynamic soils life for HDPE pipe to conservatively be 50-100
and areas prone to earthquake. HDPE pipe years.
for pressure applications can accept repetitive
pressure surges that exceed the static pressure
rating of the pipe.
10
1-48 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
HDPE PIPE
1
DR32.5 (50 PSI) DR26 (64 PSI) DR21 (80 PSI) DR17 (100 PSI)
Average Average Min. Average Min. Average Min. Average Min.
Nominal Average Average Average Average
Outside Inside Wall Inside Wall Inside Wall Inside Wall
Pipe Weight Weight Weight Weight
Diam- Diam- Thick- Diam- Thick- Diam- Thick- Diam- Thick-
Size (lbs/ft) (lbs/ft) (lbs/ft) (lbs/ft)
eter eter ness eter ness eter ness eter ness
3 3.50 - - - - - - 3.147 0.167 0.76 3.064 0.206 0.93
4 4.50 4.206 0.138 0.83 4.133 0.173 1.03 4.046 0.214 1.26 3.939 0.265 1.54
2
5 5.56 5.200 0.171 1.27 5.109 0.214 1.57 5.001 0.265 1.93 4.869 0.327 2.35
6 6.63 6.193 0.204 1.80 6.085 0.255 2.23 5.956 0.315 2.73 5.799 0.390 3.33
7 7.13 6.660 0.219 2.08 6.544 0.274 2.58 6.406 0.339 3.16 6.236 0.418 3.85
8 8.63 8.062 0.265 3.05 7.922 0.332 3.78 7.754 0.411 4.63 7.549 0.507 5.65
10 10.75 10.049 0.331 4.73 9.873 0.413 5.87 9.665 0.512 7.19 9.409 0.632 8.77
12 12.75 11.918 0.392 6.66 11.710 0.490 8.25 11.463 0.607 10.11 11.160 0.750 12.34
13 13.38 12.503 0.412 7.33 12.284 0.514 9.08 12.025 0.637 11.13 11.707 .0787 13.58
3
14 14.00 13.087 0.431 8.03 12.858 0.538 9.95 12.587 0.667 12.19 12.254 0.824 14.87
16 16.00 14.956 0.492 10.48 14.695 0.615 12.99 14.385 0.762 15.93 14.005 0.941 19.43
18 18.00 16.826 0.554 13.27 16.532 0.692 16.45 16.183 0.857 20.16 15.755 1.059 24.59
20 20.00 18.695 0.615 16.38 18.369 0.769 20.30 17.981 0.952 24.88 17.506 1.176 30.35
22 22.00 20.565 0.677 19.82 20.206 0.846 24.57 19.779 1.048 30.11 19.256 1.294 36.73
24 24.00 22.434 0.738 23.59 22.043 0.923 29.24 21.577 1.143 35.83 21.007 1.412 43.71
26 26.00 24.304 0.800 27.68 23.880 1.000 34.31 23.375 1.238 42.05 22.758 1.529 51.30
4
28 28.00 26.174 0.862 32.11 25.717 1.077 39.80 25.173 1.333 48.77 24.508 1.647 59.50
30 30.00 28.043 0.923 36.86 27.554 1.154 45.68 26.971 1.429 55.99 26.259 1.765 68.30
32(M) 31.59 29.533 0.972 40.88 29.018 1.215 50.67 28.405 1.504 62.10 27.654 1.858 75.75
36 36.00 33.652 1.108 53.08 33.065 1.385 65.79 32.366 1.714 80.62 31.511 2.118 98.35
40(M) 39.47 36.894 1.214 63.80 36.251 1.518 79.07 35.485 1.879 96.91 34.547 2.322 118.22
42 42.00 39.260 1.292 72.24 38.575 1.615 89.54 37.760 2.000 109.74 36.762 2.471 133.86
48(M) 47.38 44.291 1.458 91.94 43.519 1.822 113.96 42.599 2.256 139.67 41.473 2.787 170.37
5
54 54.00 50.478 1.662 119.42 49.597 2.077 148.02 48.549 2.571 181.41 47.266 3.176 221.29
55(M) 55.30 51.688 1.701 125.22 50.786 2.127 155.20 49.713 2.633 190.21 48.399 3.253 232.03
63(M) 63.21 59.086 1.945 163.62 58.055 2.431 202.81 56.828 3.010 248.55 - - -
6
Nominal Average Average Average Average Average Average Average
Min. Wall Min. Wall Min. Wall
Pipe Outside Inside Weight Inside Weight Inside Weight
Thickness Thickness Thickness
Size Diameter Diameter (lbs/ft) Diameter (lbs/ft) Diameter (lbs/ft)
3 3.50 2.825 0.318 1.38 2.676 0.389 1.65 2.484 0.479 1.97
4 4.50 3.633 0.409 2.29 3.440 0.500 2.73 3.193 0.616 3.26
5 5.56 4.491 0.506 3.50 4.253 0.618 4.17 3.947 0.762 4.99
6 6.63 5.348 0.602 4.96 5.064 0.736 5.92 4.701 0.908 7.07
7
7 7.13 5.752 0.648 5.74 5.447 0.792 6.85 5.056 0.976 8.18
8 8.63 6.963 0.784 8.41 6.593 0.958 10.03 6.120 1.182 11.98
10 10.75 8.678 0.977 13.06 8.218 1.194 15.59 7.628 1.473 18.62
12 12.75 10.293 1.159 18.37 9.747 1.417 21.92 9.047 1.747 26.19
13 13.38 10.797 1.216 20.22 10.224 1.486 24.13 9.491 1.832 28.82
14 14.00 11.302 1.273 22.15 10.702 1.556 26.43 9.934 1.918 31.58
16 16.00 12.916 1.455 28.93 12.231 1.778 34.53 11.353 2.192 41.24
8
18 18.00 14.531 1.636 36.62 13.760 2.000 43.70 12.773 2.466 52.20
20 20.00 16.145 1.818 45.21 15.289 2.222 53.95 14.192 2.740 64.44
22 22.00 17.760 2.000 54.70 16.818 2.444 65.28 15.611 3.014 77.98
24 24.00 19.375 2.182 65.10 18.347 2.667 77.68 17.030 3.288 92.80
26 26.00 20.989 2.364 76.41 19.876 2.889 91.17 18.449 3.562 108.91
28 28.00 22.604 2.545 88.61 21.404 3.111 105.71 - - -
30 30.00 24.218 2.727 101.72 22.933 3.333 121.38 - - -
9
32(M) 31.59 25.505 2.872 112.82 24.152 3.510 134.62 - - -
36 36.00 29.062 3.273 146.48 - - - - - -
Notes
Pipe dimensions are in accordance with ASTM F714 and AWWA C906.
Pressure ratings are for water at 73.4 deg F.
10
Some of the pipe sizes and/or DRs above are only available upon request.
Other diameters and DRs not listed may be available upon special request.
All dimensions are in inches unless otherwise specified.
Weights are calculated by the methodology established in PPIs TR7.
www.fabcoplastics.com 1-49
HDPE FITTINGS
Butt 45 Elbows
1 (Elongated)
SDR 11 (STANDARD DIMENSION RATIO) 160
PSI (WORKING PRESSURE AT 73.4F)
2
NOMINAL A B C (IN) D (IN) E WEIGHT
DIAMETER (IN) (IN) WALL OD (IN) (LBS)
3/4 IPS 2.28 2.05 0.095 1.05 4.29 0.05
1 IPS 2.48 2.17 0.119 1.315 4.69 0.08
1 1/4 IPS 2.83 2.44 0.151 1.66 5.31 0.14
1 1/2 IPS 3.07 2.64 0.173 1.9 5.91 0.21
3
2 IPS 3.23 2.64 0.216 2.375 6.38 0.35
3 IPS 4.72 3.86 0.318 3.5 9.33 1.07
4 IPS 5.31 4.21 0.409 4.5 10.63 2
6 IPS 6.89 5.35 0.603 6.625 14.09 5.55
8 IPS 8.46 6.54 0.785 8.625 17.48 11.64
10 IPS 10.04 7.64 0.978 10.75 20.94 21.3
12 IPS 10.63 7.8 1.16 12.75 22.64 31.84
4
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4F)
NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD E (IN) WEIGHT (LBS)
2 IPS 3.23 2.64 0.14 2.375 6.38 0.23
3 IPS 4.72 3.86 0.206 3.5 9.33 0.72
4 IPS 5.31 4.21 0.264 4.5 10.63 1.32
6 IPS 6.89 5.35 0.39 6.625 14.09 3.77
5
8 IPS 8.46 6.54 0.508 8.625 17.48 8.03
10 IPS 10.04 7.64 0.633 10.75 20.94 14.44
12 IPS 10.63 7.8 0.75 12.75 22.64 21.3
Molded of PE 100/4710/3408 Black
Butt 90 Elbows
6 (Elongated)
7
NOMINAL A B C (IN) D (IN) E WEIGHT
DIAMETER (IN) (IN) WALL OD (IN) (LBS)
3/4 IPS 2.68 2.05 0.095 1.05 3.2 0.05
1 IPS 2.91 2.17 0.119 1.315 3.57 0.09
1 1/4 IPS 3.35 2.44 0.151 1.66 4.18 0.16
1 1/2 IPS 3.7 2.64 0.173 1.9 4.65 0.22
2 IPS 4.25 2.95 0.216 2.375 5.44 0.43
8
3 IPS 5.91 4.06 0.318 3.5 7.66 1.25
4 IPS 6.89 4.53 0.409 4.5 9.14 2.42
6 IPS 9.06 5.63 0.603 6.625 12.37 6.76
8 IPS 11.81 7.2 0.785 8.625 16.13 15.08
10 IPS 13.78 8.27 0.978 10.75 19.15 27.06
12 IPS 14.96 8.46 1.16 12.75 21.33 41.05
9
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4F)
NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD E (IN) WEIGHT (LBS)
2 IPS 4.25 2.95 0.14 2.375 5.44 0.28
3 IPS 5.91 4.06 0.206 3.5 7.66 0.8
4 IPS 6.89 4.53 0.264 4.5 9.14 1.64
6 IPS 9.06 5.63 0.39 6.625 12.37 4.8
8 IPS 11.81 7.2 0.508 8.625 16.13 10.05
10
10 IPS 13.78 8.27 0.633 10.75 19.15 18.33
12 IPS 14.96 8.46 0.75 12.75 21.33 27.47
Molded of PE 100/4710/3408 Black
2
NOMINAL C (IN) D (IN) WEIGHT
A (IN) B (IN)
DIAMETER WALL OD (LBS)
3/4 IPS 2.05 0.095 1.05 1.77 0.02
1 IPS 2.2 0.119 1.315 1.77 0.04
1 1/4 IPS 2.52 0.151 1.66 1.99 0.07
1 1/2 IPS 2.83 0.173 1.9 2.2 0.1
2 IPS 3.23 0.216 2.375 2.52 0.19
3
3 IPS 4.72 0.318 3.5 3.7 0.59
4 IPS 5.31 0.409 4.5 3.98 1.07
6 IPS 6.89 0.603 6.625 4.84 2.88
8 IPS 8.66 0.785 8.625 5.83 6.32
10 IPS 9.84 0.978 10.75 6.3 10.9
12 IPS 11.77 1.16 12.75 7.52 18.39
4
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4F)
NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD WEIGHT (LBS)
2 IPS 3.23 0.14 2.375 2.52 0.12
3 IPS 4.72 0.206 3.5 3.7 0.39
4 IPS 5.31 0.264 4.5 3.98 0.71
6 IPS 6.89 0.39 6.625 4.84 1.98
8 IPS 8.66 0.508 8.625 5.83 4.23
5
10 IPS 9.84 0.633 10.75 6.3 7.53
12 IPS 11.77 0.75 12.75 7.52 12.4
Molded of PE 100/4710/3408 Black
7
C (IN) D (IN)
DIAMETER OD (IN) WALL (LBS)
3/4 IPS 1.05 1.85 0.39 4.02 0.095 0.07
1 IPS 1.315 2.36 0.39 4.02 0.119 0.11
1 1/4 IPS 1.66 2.8 0.39 4.02 0.151 0.16
1 1/2 IPS 1.9 3.15 0.39 4.02 0.173 0.12
2 IPS 2.375 3.94 0.55 6.1 0.216 0.48
3 IPS 3.5 5 0.67 6.1 0.318 0.93
8
4 IPS 4.5 6.61 0.79 6.1 0.409 1.66
6 IPS 6.625 8.5 1.02 8.07 0.603 4.07
8 IPS 8.625 10.63 1.26 10.67 0.785 8.73
10 IPS 10.75 12.99 1.38 11.5 0.978 14.11
12 IPS 12.75 15.75 1.5 10.83 1.16 19.88
9
SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4F)
NOMINAL DIAMETER A (IN) OD B (IN) C (IN) D (IN) E (IN) WALL WEIGHT (LBS)
2 IPS 2.375 3.94 0.55 6.1 0.14 0.37
3 IPS 3.5 5 0.67 6.1 0.206 0.71
4 IPS 4.5 6.61 0.79 6.1 0.264 1.27
6 IPS 6.625 8.5 1.02 8.07 0.39 3.02
8 IPS 8.625 10.63 1.02 10.67 0.508 6.02
10
10 IPS 10.75 12.99 1.18 11.5 0.633 10.06
12 IPS 12.75 15.75 1.38 10.83 0.75 14.17
www.fabcoplastics.com 1-51
HDPE FITTINGS
3
yield 55,000 psi, elongation 6%.
Dimensions: Vital dimensions AWWA C207, Mates with ANSI
B16.5, B16.47; AWWA C207.
Finish: Red oxide primer, hot dipped galvanized
PIPE DIAMETER OD FLANGE THICKNESS ID BOLT # BOLT HOLE DIAMETER BOLT CIRCLE
4
1" 3.5 0.44 0.91 4 0.63 2.38
1 1/4" 4.63 0.5 1.72 4 0.63 3.5
1 1/2" 5.0 0.5 1.97 4 0.63 3.88
2" 6.0 0.5 2.75 4 0.75 4.75
3" 7.5 0.5 3.56 4 0.75 6.0
4" 9.0 0.56 4.56 8 0.75 7.50
6" 11.0 0.63 6.75 8 0.88 9.5
5
8" 13.5 0.63 8.75 8 0.88 11.75
10" 16.0 0.63 10.88 12 1.0 14.25
12" 19.0 0.75 12.88 12 1.0 17.0
7
3 x 2 IPS 7.87 3.94 2.95 0.206 2.375 3.5 0.14 0.47
4 x 2 IPS 9.06 4.33 2.95 0.264 2.375 4.5 0.14 0.8
4 x 3 IPS 9.06 4.33 3.94 0.264 3.5 4.5 0.206 0.94
6 x 3 IPS 11.42 5.12 3.94 0.39 3.5 6.625 0.206 2.18
6 x 4 IPS 11.42 5.12 4.33 0.39 4.5 6.625 0.264 2.39
8 x 6 IPS 12.8 6.1 5.12 0.508 6.625 8.625 0.39 4.92
10 x 8 IPS 14.37 6.25 5.813 0.75 8.625 10.75 0.508 10.21
8
12 x 8 IPS 16.54 7.09 6.1 0.75 8.625 12.75 0.508 12.82
12x10 IPS 16.54 7.09 6.69 0.75 10.75 12.75 0.633 14.43
9
3 x 2 IPS 7.87 3.94 2.95 0.318 2.375 3.5 0.216 0.7
4 x 2 IPS 9.06 4.33 2.95 0.409 2.375 4.5 0.216 1.21
4 x 3 IPS 9.06 4.33 3.94 0.409 3.5 4.5 0.318 1.41
6 x 3 IPS 11.42 5.12 3.94 0.603 3.5 6.625 0.318 3.21
6 x 4 IPS 11.42 5.12 4.33 0.603 4.5 6.625 0.409 3.54
8 x 6 IPS 12.8 6.1 5.12 0.785 6.625 8.625 0.603 7.31
10 x 8 IPS 14.37 6.25 5.875 1.16 8.625 10.75 0.785 14.45
10
12 x 8 IPS 16.54 7.09 6.1 1.16 8.625 12.75 0.785 19.11
12 x 10 IPS 16.54 7.09 6.69 1.16 10.75 12.75 0.978 21.66
Molded of PE 100/4710/3408 Black
2
3/4 IPS 5 2.5 0.095 1.05 1.77 0.09
1 IPS 5.67 2.83 0.119 1.315 1.77 0.17
1 1/4 IPS 6.61 3.31 0.151 1.66 2.01 0.3
1 1/2 IPS 7.99 4 0.173 1.9 2.52 0.47
2 IPS 8.66 4.33 0.216 2.375 2.48 0.82
3 IPS 11.81 5.91 0.318 3.5 3.54 2.18
4 IPS 13.78 6.89 0.409 4.5 3.94 4.02
6 IPS 18.11 9.06 0.603 6.625 4.72 10.91
3
8 IPS 23.62 11.81 0.785 8.625 5.71 24.61
10 IPS 27.56 13.78 0.978 10.75 6.3 42.6
12 IPS 31.57 15.97 1.16 12.75 7.52 67.85
4
4 IPS 13.78 6.89 0.264 4.5 3.94 2.58
6 IPS 18.11 9.06 0.39 6.625 4.72 7.24
8 IPS 23.62 11.81 0.508 8.625 5.71 16.6
10 IPS 27.56 13.78 0.633 10.75 6.3 28.9
12 IPS 31.57 15.97 0.75 12.75 7.52 45.32
Molded of PE 100/4710/3408 Black
Electro-Fusion Coupler
SDR 17-7.4 PE 100/4710 BLACK. MOP WATER
5
160PSI / GAS 100PSI INJECTION MOLDED.
NOMINAL PIPE NOMINAL NOMINAL NOMINAL NOMINAL
SIZE DA (OD) OD L D D1 T
6
1/2" .63" 2.953 1.22 1.398 1.476
3/4" 1.05" 3.189 1.417 1.496 1.594
1" 1.315" 3.504 1.732 1.654 1.752
1 1/4" 1.66" 3.898 2.087 1.811 1.949
1 1/2" 1.9" 4.37 2.638 2.008 2.185
2" 2.375" 5 3.13 2.185 2.5
3" 3.5" 5.551 4.33 2.835 2.736
4" 4.5" 5.98 5.55 3.307 2.95
7
6" 6.625" 7.126 8.11 4.39 3.52
8" 8.625" 9.094 10.551 5.433 4.469
10" 10.75"
12" 12.75"
9
3/4" 25 - 3/4" - MOP 160 psi 4.016 0.63 1.339 0.472 2.75
1" 32 - 1" - MOP 160 psi 4.488 0.630 1.654 0.630 3.120
1 1/4" 40 - 1 1/4" - MOP 160 psi 5.118 0.630 2.008 0.630 3.500
1 1/2" 50 - 1 1/2" - MOP 160 psi 5.236 0.630 2.441 0.709 3.880
2" 63 - 2" - MOP 160 psi 6.378 0.787 3.071 0.709 4.750
2 1/2" 75-2 1/2"- MOP 160 psi 7.244 0.787 3.622 0.709 5.500
3" 90 - 3" - MOP 160 psi 7.638 0.787 4.370 0.709 6.000
4" 110/125 - 4" - MOP 160 psi 9.015 0.787 5.236 0.709 7.500
10
6" 160 - 6" - MOP 160 psi 11.141 0.866 7.008 0.945 9.500
8" 200/225 - 8" - MOP 160 psi 13.582 0.866 9.291 0.945 11.750
10" 250 - 10" - MOP 160 psi 16.22 0.984 11.339 1.063 14.250
12" 315 - 12" - MOP 160 psi 19.17 0.984 13.307 1.260 17.000
www.fabcoplastics.com 1-53