This document is an RFQ form for requesting a quote to produce a custom shield. The form allows the customer to specify dimensions for a standard one-piece shield design, choose options like material, finish, mounting style, and include ventilation holes or an etched logo. Notes provide additional information on common materials, finishes, tolerances and other customization options available from the manufacturer.
This document is an RFQ form for requesting a quote to produce a custom shield. The form allows the customer to specify dimensions for a standard one-piece shield design, choose options like material, finish, mounting style, and include ventilation holes or an etched logo. Notes provide additional information on common materials, finishes, tolerances and other customization options available from the manufacturer.
This document is an RFQ form for requesting a quote to produce a custom shield. The form allows the customer to specify dimensions for a standard one-piece shield design, choose options like material, finish, mounting style, and include ventilation holes or an etched logo. Notes provide additional information on common materials, finishes, tolerances and other customization options available from the manufacturer.
RFQ To request a quote fill in your specifications, save the PDF and attach it to the email that opens
hat opens when you click here:
HIT ENTER AS YOU FILL IN THE SHADED AREAS TO COMPLETE THE STANDARD SHIELD DESCRIPTION
FLAT BEND RELIEF
EACH CORNER EXAMPLE 10801 B PART NUMBERS, LOGOS, ETC. OPTIONAL VENTILATION CAN BE DEPTH ETCHED THRU HOLES OR SLOTS ON ANY SURFACE FOR COOLING OR ACCESS. THRU HOLES AT NO ADDITIONAL COST SEE DESCRIPTION BELOW. OR SLOTS CAN BE ADDED FOR COOLING OR ACCESS C AT NO ADDITIONAL COST DEPTH ETCH PINS FOR REFERENCE A BEND LINES ON INSIDE SURFACE ONLY. SEE MOUNTING OPTIONS BELOW
SEE MOUNTING OPTION CHOOSE MOUNTING OPTION
STANDARD THROUGH SURFACE HOLE D MOUNT MOUNT .015 TYP F SOLDERED SEAM CLEAR FILL IN DIMENSIONS CHOOSE FINISH .200 TYP E DIM A Bright Tin YES NO .100 TYP DIM B Matte Tin DIM C Tin Lead VENT OR ACCESS HOLES OR SLOTS DEPTH ETCHED PART NUMBER OR LOGO DIM D CHOOSE MATERIAL THICK PLEASE DESCRIBE HERE: PLEASE DESCRIBE HERE: NO NO DIM E Brass CDA 260 .015 YES YES DIM F Steel 1010 Nickel Silver UNLESS OTHERWISE Tech-Etch, Inc. NOTES: 45 Aldrin Road SPECIFIED: 1. MATERIALS: 1/2 HARD BRASS, CDA 260 DIMENSIONS IN INCHES. Plymouth, MA 02360 2. FINISH: 200-500 MICROINCHES, BRIGHT TIN PER ASTM B-545 TOLERANCES TO BE: TEL 508-747-0300 FAX 508-746-9639 .XX .015" SKRWRHWFK@tech-etch.com www.tech-etch.com 3. SOLDER TYPE: NONE LEAD-FREE SAC305 ALLOY; MELTING POINT = 217C .XXX .010" CUSTOMER / REF DOC: ANGLES 3 DEG 4. THIS DRAWING IS FOR STANDARD TECH-ETCH BOARD LEVEL SHIELDS. SCALE: DESCRIPTION: OTHER CONFIGURATIONS AND OPTIONS ARE AVAILABLE. PLEASE CONTACT THE FACTORY FOR APPLICATION ASSISTANCE AND CUSTOM DESIGNS. NONE STD. BOARD LEVEL SHIELD - ONE-PIECE DOC. REVISION DATE: CUSTOMER PART NUMBER: 5. SUGGESTED SOURCE OF SUPPLY:
TECH-ETCH, INC., 45 ALDRIN ROAD, PLYMOUTH, MA 02360 3/17/10