Professional Documents
Culture Documents
APPLICATION HANDBOOK
Edition 24
March 2003
CONTENTS
INDEX
Please note that the performance information included in this book is for
estimation purposes only. It is based on information that Komatsu Ltd. has
but actual figures will vary with the operating conditions, including
material characteristics, site conditions, operator efficiency, etc. Neither
Komatsu Ltd. nor its dealers will guarantee that the machines will perform
as estimated.
2003 Komatsu
All Rights Reserved
Printed in Japan
G-1
G-2
CONTENTS
INDEX
11 MOBILE CRUSHERS & 11A MOBILE CRUSHERS 11C MOBILE SOIL RECYCLERS
RECYCLERS & RECYCLERS 11D MOBILE BELT CONVEYORS
11B MOBILE WOOD TUB GRINDERS 11E MOBILE SCREENS
14 ENGINES 14 ENGINES
15 TIRES 15 TIRES
INDEX INDEX
G-3
Information Index Table GENERAL
G-4
Information Index Table GENERAL
Application Information
Product Sections
Special
Road Trimming Railway
Area of Information Demolition Application Productivity O & O Costs
Maintenance Dozer Maintenance
Recomendation
Benefits
Features 13C-3 13D-2
Model Selection 13A-2 13C-3
Model and Application
Specifications 13C-7 13D-3
Dimensions 13D-4
Working Range 13D-5
18-15
Undercarriage-Shoes/Tires 13C-6
Tire Life
Ground Pressure
Standard Equipment 13C-5
Attachment 13A-4
17A
Production Calc.
Method
13B-5
(GS: Wheel
Stabilizer)
13B-6
(CS: Crawler
Related Products Stabilizer)
(by model designation) 13B-9
(GC: Road
Cutter)
13B-10
(CS: Stone
Crusher)
Construction Methods 13A-3 13B-2 13C-2
Earthmoving Data 17B
Cost Calculations 18
Conversion Charts
Recomendation 16-2
Only the first page of each section is shown in above table.
G-5
Preface GENERAL
PREFACE
This handbook referes to machine specifications, productivity and owning & operation cost for construction
equipment sold by Komatsu. It serves as a guide for the following cases:
* Estimation of productivity for each machine
* Estimation of owning & operating costs for each machine
* Selection of machines for purchasing construction equipment
* Selection of machines for performing construction job
The performance of a machine is determined by its production and operating costs. Important machine
factors that influence production includes the horsepower, operating weight, capacity of work equipment,
traveling speed and types of mechanical, hydraulic and electrical systems. They are referred to in the related
section in the handbook. Some of the significant elements that comprise the operating cost factors are the
consumption of fuel and lubricants, the service life of tires and undercarriage and the repair cost of
components. These expenditures are discussed in the section entitled Owning & Operating Costs.
The data and tables in the handbook are based on Komatsu's bench and field tests, computer analysis and
many years of experience. We continuously conduct tests to improve the reliability of the data. However,
because of the complexity of factors influencing production costs and the deviations that may occur during
the preparation of data, Komatsu does not guarantee that the data is exact and that the performance shown
in the handbook is always obtainable with the given job conditions.
The basic performance data in the handbook are the values when machines are used at ideal efficiency. As
performance varies with operator's skill, ground and weather conditions, etc., in reality, the basic data needs
to be modified by using the various factors included in the handbook, resulting in different figures depending
on the selection of these factors. Owning and operating cost also varies depending upon the machine usage,
and the calculation result differs by what job condition and factors are applied for the calculation. Therefore, it
should be understood that the calculated figures do not always completely match the actual measured data.
Nevertheless, handbook users will be able to make proper approximate calculations based on the data given
in the handbook, their work experience and knowledge of local conditions.
This handbook is revised yearly. The data in the handbook is accurate at the time of printing; however,
Komatsu may make changes in the specifications and materials without notice. Changes are made because
of Komatsu's fundamental program of conducting continuous improvements on its products. Therefore, when
you need the most updated information or specifications, obtain the latest catalogs through your distributor.
This handbook contains machine models produced in the various areas in the world. Specifications may vary
depending upon production location; all models are not always available everywhere in the world.
The final objective for an owner of construction equipment is to perform the necessary construction job with
the best efficiency and safety. It is desirable for an owner to understand the job efficiency factors and the
machine use factors before utilizing this handbook.
They are as follows:
G-6
Preface GENERAL
G-7
Preface GENERAL
3) Prevention of fire
The owner and operator of a construction machine must follow the machine's maintenance guidelines
and manage the job so that danger of fire will be minimized. A fire breaks out mainly by leakage of fuel,
oil and grease; by electrical shorts caused from fatigue, loosening, or rubbing of electric parts and by
ignition from engine high temperature parts contacting combustibles, such as plants and papers.
The owner of a machine needs to maintain a machine by daily checks so that the causes described
above do not exist.
The operator must confirm by walk-around check before starting the machine that the above-
mentioned hazards do not exist. If any problems are found, the machine must not be started until the
problems are fixed.
Equip a machine with a fire extinguisher in preparation for emergency.
G-8
The Komatsu GENERAL
Product Line
BULLDOZERS
Flywheel horsepower 40 to 1150 HP (29.5 to 858 kW)
SWAMP BULLDOZERS
Flywheel horsepower 40 to 225 HP (29.5 to 168 kW)
DOZERS SHOVELS
Flywheel horsepower 40 to 200 HP (29.5 to 149 kW)
PIPELAYERS
Flywheel horsepower 225 to 360 HP (168 to 259 kW)
G-9
The Komatsu GENERAL
Product Line
G-10
The Komatsu GENERAL
Product Line
WHEEL LOADERS
Bucket capacity 0.3 to 20 m3 (0.4 to 26.2 yd3)
(C) indicates custom series.
WA500-3 WA480-5 WA450-5 WA400-5 WA420-3 WA380-3 WA320-3 (C) WA250-3 WA250PT-3
WA470-5 WA430-5 WA380-5 WA270-3
WA250-5
WA180-3 WA180PT-3 WA120-3 WA115-3 WA95-3 WA80-3 WA85-3 WA65-3 WA50-3 WA30-5
WA90-3 WA75-3
BACKHOE LOADERS
Bucket capacity 0.7 to 1.03 m3 (0.92 to 1.35 yd3)
G-11
The Komatsu GENERAL
Product Line
MOTOR GRADERS
Flywheel horsepower 125 to 280 HP 93 to 209 kW)
ROAD STABILIZERS
Flywheel horsepower 203 to 355 HP (152 to 265 kW)
GC380F-2 CS210-2
VIBRATORY ROLLERS
Operating weight 600 to 11,250 kg (1,320 to 24,800 lb)
JW30-2
G-12
The Komatsu GENERAL
Products Line
BM2014C BM2009C
G-13
The Komatsu GENERAL
Products Line
ENGINES
Piston displacement 3.92 to 61.8 Itr (239 to 3771 cu in)
G-14
CONTENTS
INDEX
SECTION 1
CRAWLER TYPE TRACTORS Sec 1A
BULLDOZERS Sec 1B
RIPPERS Sec 1C
TOWING WINCHES Sec 1D
PIPELAYERS Sec 1E
SECTION 1A
CRAWLER-TYPE
TRACTORS
CONTENTS
Features .................................................................... 1A-2
Specifications ........................................................... 1A-7
Specifications (Low ground pressure) ................. 1A-11
Drawbar pull vs. travel speed ............................... 1A-13
Ground pressure .................................................... 1A-16
Shoe application .................................................... 1A-18
Shoe selection ........................................................ 1A-19
Roller guard installation ........................................ 1A-21
Upper attachment .................................................. 1A-23
1A-1
Features CRAWLER-TYPE
TRACTORS
! High productivity
The high-power engine, highly efficient power train,
large drawbar pull provided by the conventional
undercarriage, and the high performance work
equipment provide high productivity.
Large capacity blade
Large capacity blade, powerful digging force,
large up-and-down movement of the blade, and
high strength provided by high tensile steel.
Uniquely designed ripper
The unique linkage design enables the ripper
point to draw an ideal locus during cylinder tilting
for effective excavation of embedded rocks.
Automatic lock-up torque converter
When the lock-up clutch is engaged, the pump
Torque converter
and the turbine are virtually connected and the
internal power loss of the torque converter is
minimized. (D275AX, D375A and D475A) Engine
1A-2
Features CRAWLER-TYPE
TRACTORS
Reduction of man-hours for turning over the NEW
CURRENT
bushings by employment of wedge ring. (Large
Class)
Track roller
Strengthening of undercarriage by increase of
press fitting width of pin. (Small-middle Class) Track link
The most important matters for the undercarriage
of a bulldozer are holding of the oil filled in the
links and easiness of turning over the bushings. Roller guard
KOMATSU increased the rigidity and abrasion life
of the links and lowered the press fitting force of Wedge ring
Link pin
Bushing
WIDE
NARROW
PRESS FITTING WIDTH
Others
Use
Track 3 Others
Turning over
the bushings
New bushings Before turning over
er
ov
the bushings
g
Track 2 Track 2
in
rn
Tu
After turning over Used bushings With turning over Without turning over
the bushings the bushings the bushings
Final drive
FVDM0692
1A-3
Features CRAWLER-TYPE
TRACTORS
! Easy operation / Operator comfort
Operator-oriented arrangement of control levers,
pedals, instruments and operator seat.
Walk-through operator compartment provides
easy boarding and exiting.
Operator seat can be adjusted to provide the
most suitable operating posture.
Steering clutches and brakes are interconnected
for easy operation.
Low profile design assures excellent machine FLD00456
1A-4
Features CRAWLER-TYPE
TRACTORS
Centralized oil pressure inspection ports D375A-5
Oil pressure check ports are centralized on the
left side of the chassis to make it easier to carry Single tilt
out inspection and maintenance. Dual tilt
E
L
DUA
Blade control joystick uses the PPC (Proportional
Pressure Control) valve and palm command
joystick the same as travel control joystick.
PITCH
PPC control uses the highly reliable Komatsu
hydraulic system enabling superb fine control. 3 4 FVDM0808A
(Dual tilt and pitch operation are enabled by
depressing switch with a thumb. This is available
when optional dual tilt dozer is installed.)
(D275-5, D375A and D575A-3 SD)
! Easy maintenance
Bolt-on type sprocket or segmented sprocket
teeth for easy in- field replacement. [Except D21]
FLD00421
Simple maintenance is promoted through
adoption of spin-on type fuel and full-flow filters,
an air cleaner with an automatic dust evacuator,
and others.
Maintenance-free, wet, multiple-disc
brakes
To ensure long life and dependability
maintenance-free, wet, multiple-disc brakes are
utilized.
(D41, D61, D65, D155A-5/D155AX, D275A,
D375A, D475A and D575A)
1A-5
Features CRAWLER-TYPE
TRACTORS
HST dynamic brakes
Fulcrum of major bogie
KomStat uses HST dynamic brakes to ensure
safe operation.
Parking brake is wet, multiple-disc type with a
unique drag-prevention control to keep hydraulic
oil clean.
(D31, D37 and D39)
K-Bogie undercarriage system
New K-Bogie undercarriage system retains prior
advantages, with new additional features.
New features on K-Bogie Undercarriage Fulcrum of minor bogie
System:
K-bogies oscillate with two fulcrums, and track
roller vertical travel is greatly increased. Impact
loading on all undercarriage components has
been reduced and durability of components is
improved since track rollers are always in
contact with tack link.
Undercarriage life is improved due to better
control of track chain alignment with track
rollers.
Riding comfort is improved by reducing
vibration and shock when traveling over rough
terrain.
(D275A, D275AX, D375A and D475A)
Auto-shift down function
Controller monitors engine speed, travel gear and
travel speed.
When load is applied and machine travel speed is
reduced, the controller automatically downshifts
to optimize gear speed to provide high fuel
efficiency. This function provides comfortable
operation and high productivity without manual
downshifting. (This function can be deactivated
with cancel switch).
(D275, D375A and D575A SD)
Preset travel speed selection function
Preset travel speed selection function is standard
equipment, enabling the operator to select fore
and aft travel speed among three preset patterns,
F1-R2, F2-R2 and manual shift. When F1-R2 or
F2-R2 preset pattern is selected, and travel
control joystick moves from forward to reverse
direction, the machine travels forward/reverse
with F1/R2 or F2/R2 speed automatically. This
function reduces gear shifting time during
repeated round trip operations.
(D275, D375A and D575A SD)
1A-6
Specifications CRAWLER-TYPE
TRACTORS
Model
D21A-7 D31E-20 D31EX-21 D37EX-21
Item
OPERATING WEIGHT* kg (lb) 3140 (6,920) 5240 (11,550) 7130 (15,720) 7650 (16,870)
FLYWHEEL HORSEPOWER HP (kW)/RPM 40 (29.5)/2450 70 (52)/2350 75 (56)/2000 85 (63)/2000
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 2.6 (1.6) 2.2 (1.4) 4.3 (2.7) 4.3 (2.7)
2nd 4.4 (2.7) 3.9 (2.4) 6.5 (4.0) 6.5 (4.0)
3rd 6.5 (4.0) 8.5 (5.3) 8.5 (5.3)
4th
5th
Reverse 1st 3.3 (2.1) 2.4 (1.5) 4.3 (2.7) 4.3 (2.7)
2nd 5.6 (3.5) 4.3 (2.7) 6.5 (4.0) 6.5 (4.0)
3rd 7.1 (4.4) 8.5 (5.3) 8.5 (5.3)
4th
Max. drawbar pull kg (lb/kN) 4520 9030 12500 12500
(9,970/44.3) (19,910/88.6) (27,560/123) (27,560/123)
DIMENSIONS:
Overall length mm (ft.in) 2560 (8'5") 2785 (9'2") 3055 (10'0") 3055 (10'0")
Overall width (w/o trunnion) mm (ft.in) 1610 (5'3") 1790 (5'10") 1850 (6'1") 1850 (6'1")
Overall height (at transport)** mm (ft.in) 1785 (5'10") 1955 (6'5") 1890 (6'2") 1890 (6'2")
Track gauge mm (ft.in) 1310 (4'4") 1450 (4'9") 1450 (4'9") 1450 (4'9")
Length of track on ground mm (ft.in) 1685 (5'6") 1880 (6'2") 2010 (6'7") 2240 (7'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D94E S4D102E SAA4D102E SAA4D102E
No.of cylinders- mm (in) 4-94 100 4-102 120 4-102 120 4-102 120
bore stroke (3.70 3.93) (4.02 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 2.775 (169) 3.92 (239) 3.92 (239) 3.92 (239)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5 1/5 1/5 1/6
Width of shoe
Standard mm (in) 300 (11.8) 330 (13.0) 400 (15.7) 400 (15.7)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 60 (15.9) 115 (30.4) 165 (43.6) 165 (43.6)
Model
D39EX-21 D41E-6 D61EX-12 D61EX-12 LT
Item
OPERATING WEIGHT* kg (lb) 6950 (15,320) 8790 (19,380) 13130 (28,950) 13830 (30,490)
FLYWHEEL HORSEPOWER HP (kW)/RPM 95 (71)/2200 110 (82)/2300 150 (112)/1800 150 (112)/1800
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 4.3 (2.7) 2.4 (1.5) 3.5 (2.2) 3.5 (2.2)
2nd 6.5 (4.1) 4.4 (2.7) 6.0 (3.7) 6.0 (3.7)
3rd 8.5 (5.3) 7.6 (4.7) 10.3 (6.4) 10.3 (6.4)
4th
5th
Reverse 1st 4.3 (2.7) 3.0 (1.9) 4.6 (1.9) 4.6 (1.9)
2nd 6.5 (4.1) 5.5 (3.4) 7.9 (4.9) 7.9 (4.9)
3rd 8.5 (5.3) 9.4 (5.8) 12.8 (8.0) 12.8 (8.0)
4th
Max. drawbar pull kg (lb/kN) 13800 14740
(30,420/135) (32,500/144.6)
DIMENSIONS:
Overall length mm (ft.in) 3195(10'6") 3610 (11'11") 3935 (12'11") 4160 (13'8")
Overall width (w/o trunnion) mm (ft.in) 2110 (6'11") 2300 (7'7") 2500 (8'2") 2500 (8'2")
Overall height (at transport)** mm (ft.in) 1965 (6'5") 2020 (6'8") 2195 (7'2") 2195 (7'2")
Track gauge mm (ft.in) 1650 (5'5") 1790 (5'10") 1900 (6'3") 1900 (6'3")
Length of track on ground mm (ft.in) 2360 (7'9") 2485 (8'2") 2600 (8'6") 3170 (10'5")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA4D102E SA6D102E SA6D114E SA6D114E
No.of cylinders- mm (in) 4-102 120 6-102 120 6-114 135 6-114 135
bore stroke (4.02 4.72) (4.02 4.72) (4.49 5.31) (4.49 5.31)
Piston displacement ltr. (cu.in) 3.92 (239) 5.88 (359) 8.27 (505) 8.27 (505)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/6 1/6 2/6 2/8
Width of shoe
Standard mm (in) 460 (18.1) 510 (20.1) 600 (23.6) 600 (23.6)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 165 (43.6) 250 (66.0) 337 (89.0) 337 (89.0)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-7
Specifications CRAWLER-TYPE
TRACTORS
Model
D65E-12 D65EX-15 D65EX-15 LT D68ESS-12
Item
OPERATING WEIGHT* kg (lb) 15620 (34,440) 16350 (36,050) 17090 (37,680) 14280 (31,490)
FLYWHEEL HORSEPOWER HP (kW)/RPM 180 (135)/1950 190 (142)/1950 190 (142)/1950 155 (116)/1850
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 3.9 (2.4) 3.9 (2.4) 3.9 (2.4) 3.4 (2.1)
2nd 6.8 (4.2) 6.8 (4.2) 6.8 (4.2) 5.8 (3.6)
3rd 10.6 (6.6) 10.6 (6.6) 10.6 (6.6) 9.0 (6.0)
4th
5th
Reverse 1st 5.0 (3.1) 5.0 (3.1) 5.0 (3.1) 4.4 (2.7)
2nd 8.6 (5.3) 8.6 (5.3) 8.6 (5.3) 7.6 (4.7)
3rd 13.4 (8.3) 13.4 (8.3) 13.4 (8.3) 11.3 (7.0)
4th
Max. drawbar pull kg (lb/kN)
DIMENSIONS:
Overall length mm (ft.in) 4365 (14'4") 4365 (14'4") 4365 (14'4") 4100 (13'5")
Overall width (w/o trunnion) mm (ft.in) 2390 (7'10") 2390 (7'10") 2390 (7'10") 2535 (8'4")
Overall height (at transport)** mm (ft.in) 2330 (7'8") 2330 (7'8") 2330 (7'8") 2305 (7'7")
Track gauge mm (ft.in) 1880 (6'2") 1880 (6'2") 1880 (6'2") 1926 (6'4")
Length of track on ground mm (ft.in) 2675 (8'9") 2675 (8'9") 3285 (10'9") 2930 (9'7")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 6D125E SA6D125E SA6D125E S6D114E
No.of cylinders- mm (in) 6 -125 150 6 -125 150 6 -125 150 4 -114 x 135
bore stroke (4.92 5.91) (4.92 5.91) (4.92 5.91) (4.49 x 5.31)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674) 11.04 (674) 8.27 (505)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/7 2/8 2/7
Width of shoe
Standard mm (in) 510 (20.1) 510 (20.1) 510 (20.1) 610 (24")
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 406 (107) 415 (109.6) 415 (109.6) 315 (93.3)
Model
D70LE-8 D85ESS-2 D85ESS-2A D85EX-15
Item
OPERATING WEIGHT* kg (lb) 13850 (30,530) 15620 (34,440) 15420 (34,000) 21040 (46,380)
FLYWHEEL HORSEPOWER HP (kW)/RPM 185 (138)/1850 190 (142)/1950 200 (149)/1950 240 (179)/1900
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 2.6 (1.6) 3.9 (2.4) 3.9 (2.4) 3.6 (2.2)
2nd 3.2 (2.0) 6.8 (4.2) 6.8 (4.2) 6.1 (3.8)
3rd 4.7 (2.9) 10.6 (6.6) 10.6 (6.6) 10.1 (6.3)
4th 7.0 (4.3)
5th 10.3 (6.4)
Reverse 1st 3.3 (2.1) 5.0 (3.1) 5.0 (3.1) 4.7 (2.9)
2nd 4.2 (2.6) 8.6 (5.3) 8.6 (5.3) 8.0 (5.0)
3rd 6.1 (3.8) 13.4 (8.3) 13.4 (8.3) 13.0 (8.1)
4th 9.1 (5.7)
Max. drawbar pull kg (lb/kN) 19190
(42,310/188)
DIMENSIONS:
Overall length mm (ft.in) 4125 (13'6") 4135 (13'7'') 4150 (13'7") 5035 (16'6")
Overall width (w/o trunnion) mm (ft.in) 2490 (8'2") 2660 (8'9'') 2560 (8'5") 2560 (8'5")
Overall height (at transport)** mm (ft.in) 2385 (7'10") 2375 (7'10'') 2375 (7'10") 3163 (10'5")
Track gauge mm (ft.in) 1880 (6'2") 2050 (6'9'') 2050 (6'9") 2000 (6'7")
Length of track on ground mm (ft.in) 2635 (8'8") 2980 (9'9'') 2980 (9'9") 3050 (10')
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 6D125 S6D125 S6D125 SA6D125E
No.of cylinders- mm (in) 6-125 150 6-125 150 6-125 150 6-125 x 150
bore stroke (4.92 5.91) (4.92 5.91) (4.92 5.91) (4.9 x 5.9)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/8 2/8 2/7
Width of shoe
Standard mm (in) 610 (24.0) 610 (24.0) 510 (20.1) 560 (22")
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 320 (84.5) 407 (107.5) 406 (107) 490 (129)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-8
Specifications CRAWLER-TYPE
TRACTORS
Model
D155A-5 D155AX-5 D155A-2A D275A-5
Item
OPERATING WEIGHT* kg (lb) 27900 (61,510) 28400 (62,610) 27870 (61,440) 37680 (83,070)
FLYWHEEL HORSEPOWER HP (kW)/RPM 302 (225)/1900 310 (231)/1900 320 (239)/2000 410 (306)/2000
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 3.7 (2.3) 3.5 (2.2) 3.7 (2.3) 3.8 (2.4)
2nd 6.7 (4.2) 6.2 (3.9) 6.8 (4.2) 6.7 (4.2)
3rd 11.0 (6.8) 10.8 (6.7) 11.8 (7.3) 11.2 (7.0)
4th
5th
Reverse 1st 5.0 (3.1) 4.8 (3.0) 4.5 (2.8) 4.9 (3.0)
2nd 8.2 (5.1) 8.4 (5.2) 8.2 (5.1) 8.7 (5.4)
3rd 13.9 (8.6) 13.9 (8.6) 13.7 (8.5) 14.9 (9.3)
4th
Max. drawbar pull kg (lb/kN)
DIMENSIONS:
Overall length mm (ft.in) 4975 (16'4") 4975 (16'4") 5080 (16'8") 5255 (17'3")
Overall width (w/o trunnion) mm (ft.in) 2695 (8'10") 2695 (8'10") 2810 (9'3") 2925 (9'7")
Overall height (at transport)** mm (ft.in) 2590 (8'6") 2555 (8'5") 2755 (9') 3160 (10'4")
Track gauge mm (ft.in) 2100 (6'11") 2100 (6'11") 2140 (7') 2260 (7'5")
Length of track on ground mm (ft.in) 3210 (10'6") 3210 (10'6") 3150 (10'4") 3480 (11'5")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D140E SA6D140E SA6D140E SDA6D140E
No.of cylinders- mm (in) 6-140 165 6-140 165 6-140 165 6-140 165
bore stroke (5.51 6.50) (5.51 6.50) (5.51 6.50) (5.51 6.50)
Piston displacement ltr. (cu.in) 15.24 (930) 15.24 (930) 15.24 (930) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/6 2/6 2/7 2/7
Width of shoe
Standard mm (in) 560 (22.0) 560 (22.0) 560 (22.0) 610 (24.0)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 500 (132) 625 (165) 600 (159) 840 (222)
Model
D275AX-5 D375A-5 D475A-3 D475A-3 SD
Item
OPERATING WEIGHT* kg (lb) 37680 (83,070) 49800 (109,790) 75700 (166,890) 76540 (168,740)
FLYWHEEL HORSEPOWER HP (kW)/RPM 410 (306)/2000 525 (391)/1800 860 (641)/2000 860 (641)/2000
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 3.8 (2.4) 3.8 (2.4) 3.5 (2.2) 3.5 (2.2)
2nd 6.7 (4.2) 6.8 (4.2) 6.3 (3.9) 6.3 (3.9)
3rd 11.2 (7.0) 11.8 (7.3) 10.9 (6.8) 10.9 (6.8)
4th
5th
Reverse 1st 4.9 (3.0) 5.1 (3.2) 4.7 (2.9) 4.7 (2.9)
2nd 8.7 (5.4) 9.2 (5.7) 8.4 (5.2) 8.4 (5.2)
3rd 14.9 (9.3) 15.8 (9.8) 14.3 (8.9) 14.3 (8.9)
4th
Max. drawbar pull kg (lb/kN)
DIMENSIONS:
Overall length mm (ft.in) 5255 (17'3") 5770 (18'11") 6420 (21'1") 6420 (21'1")
Overall width (w/o trunnion) mm (ft.in) 2925 (9'7") 3220 (10'7") 3600 (11'10") 3600 (11'10")
Overall height (at transport)** mm (ft.in) 3160 (10'4") 3280 (10'9") 3660 (12') 3660 (12')
Track gauge mm (ft.in) 2260 (7'5") 2500 (8'2") 2770 (9'1") 2770 (9'1")
Length of track on ground mm (ft.in) 3480 (11'5") 3840 (12'7") 4365 (14'4") 4365 (14'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SDA6D140E SA6D170E SDA12V140 SDA12V140
No.of cylinders- mm (in) 6-140 165 6-170 170 12-140 140 12-140 165
bore stroke (5.51 6.50) (6.69 6.69) (5.51 6.50) (5.51 6.50)
Piston displacement ltr. (cu.in) 11.04 (674) 23.15 (1413) 30.48 (1860) 30.48 (1860)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/7 2/7 2/7
Width of shoe
Standard mm (in) 610 (24.0) 610 (24.0) 710 (28.0) 810 (32.0)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 840 (222) 1050 (277) 1670 (441) 1670 (441)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-9
Specifications CRAWLER-TYPE
TRACTORS
Model
D575A-3 D575A-3 SD
Item
OPERATING WEIGHT* kg (lb) 98450 (217,040) 114580 (252,600)
FLYWHEEL HORSEPOWER HP (kW)/RPM 1050 (783)/1800 1150 (858)/1800
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 3.7 (2.3) 3.7 (2.3)
2nd 6.6 (4.1) 6.6 (4.1)
3rd 11.6 (7.2) 11.6 (7.2)
4th
5th
Reverse 1st 4.3 (2.7) 4.3 (2.7)
2nd 7.7 (4.8) 7.7 (4.8)
3rd 13.3 (8.3) 13.3 (8.3)
4th
Max. drawbar pull kg (lb/kN)
DIMENSIONS:
Overall length mm (ft.in) 7270 (23'10") 7695 (25'3")
Overall width (w/o trunnion) mm (ft.in) 4180 (13'9") 4180 (13'9")
Overall height (at transport)** mm (ft.in) 3780 (12'5") 3780 (12'5")
Track gauge mm (ft.in) 3220 (10'7") 3220 (10'7")
Length of track on ground mm (ft.in) 4530 (14'10") 5485 (18')
ENGINE: KOMATSU KOMATSU
Model SA12V170 SA12V170
No.of cylinders- mm (in) 12-170 170 12-170 170
bore stroke (6.69 6.69) (6.69 6.69)
Piston displacement ltr. (cu.in) 46.3 (2825) 46.3 (2825)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/6 2/8
Width of shoe
Standard mm (in) 860 (34.0) 860 (33.9)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 2100 (555) 2100 (555)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-10
Specifications CRAWLER-TYPE
(Low Ground Pressure Tractors) TRACTORS
Model
D21P-7** D31P-20** D31PX-21** D37PX-21**
Item
OPERATING WEIGHT* kg (lb) 3500 (7,720) 5860 (12,920) 6220 (13,710) 6310 (13,910)
FLYWHEEL HORSEPOWER HP (kW)/RPM 40 (29.5)/2450 70 (52)/2350 75 (56)/2000 85 (63)/2000
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 2.6 (1.6) 2.2 (1.4) 4.3 (2.7) 4.3 (2.7)
2nd 4.4 (2.7) 3.9 (2.4) 6.5 (4.0) 6.5 (4.0)
3rd 6.5 (4.0) 8.5 (5.3) 8.5 (5.3)
4th
5th
Reverse 1st 3.3 (2.1) 2.4 (1.5) 4.3 (2.7) 4.3 (2.7)
2nd 5.6 (3.5) 4.3 (2.7) 6.5 (4.0) 6.5 (4.0)
3rd 7.1 (4.4) 8.5 (5.3) 8.5 (5.3)
4th
Max. drawbar pull kg (lb/kN) 4480 8960 12500 12500
(9,880/43.9) (19,760/87.9) (27,560/123) (27,560/123)
DIMENSIONS:
Overall length mm (ft.in) 2560 (8'5") 3025 (9'11") 3090 (10'2") 3055 (10'0")
Overall width (w/o trunnion) mm (ft.in) 2000 (6'7") 2250 (7'5") 2250 (7'5") 2250 (7'5")
Overall height (at transport)*** mm (ft.in) 1810 (5'11") 2045 (6'9") 1890 (6'2") 1890 (6'2")
Track gauge mm (ft.in) 1490 (4'11") 1650 (5'5") 1650 (5'5") 1650 (5'5")
Length of track on ground mm (ft.in) 1685 (5'6") 2185 (7'2") 2185 (7' 2") 2240 (7'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D94E S4D102E SAA4D102E SAA4D102E
No.of cylinders- mm (in) 4-94 100 4-102 120 4-102 120 4-102 120
bore stroke (3.70 3.93) (4.02 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 2.775 (169) 3.92 (239) 3.92 (239) 3.92 (239)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5 1/6 1/6 1/6
Width of shoe
Standard mm (in) 510 (20.1) 600 (23.6) 600 (23.6) 600 (23.6)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 60 (15.9) 115 (30.4) 165 (43.6) 165 (43.6)
Model
D39PX-21** D41P-6 D61PX-12 D65P-12
Item
OPERATING WEIGHT* kg (lb) 7230 (15,940) 9370 (20,660) 14550 (32,080) 16940 (37,350)
FLYWHEEL HORSEPOWER HP (kW)/RPM 95 (71)/2200 110 (82)/2300 150 (112)/1800 190 (142)/1950
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 4.3 (2.7) 2.4 (1.5) 3.5 (2.2) 3.9 (2.4)
2nd 6.5 (4.1) 4.4 (2.7) 6.0 (3.7) 6.8 (4.2)
3rd 8.5 (5.3) 7.6 (4.7) 10.3 (6.4) 10.6 (6.6)
4th
5th
Reverse 1st 4.3 (2.7) 3.0 (1.9) 4.6 (2.9) 5.0 (3.1)
2nd 6.5 (4.1) 5.5 (3.4) 7.9 (4.9) 8.6 (5.3)
3rd 8.5 (5.3) 9.4 (5.8) 12.8 (8.0) 13.4 (8.3)
4th
Max. drawbar pull kg (lb/kN) 13800 14700
(30,420/135) (32,410/144.2)
DIMENSIONS:
Overall length mm (ft.in) 3195(10'6") 3610 (11'10") 4160 (13'8") 4425 (14'6")
Overall width (w/o trunnion) mm (ft.in) 2425 (7'11") 2490 (8'2") 3000 (9'10") 2965 (9'9")
Overall height (at transport)*** mm (ft.in) 1965 (6'5") 2020 (6'8") 2195 (7'2") 2300 (7'7")
Track gauge mm (ft.in) 1790 (5'10") 1790 (5'10") 2140 (7') 2050 (6'9")
Length of track on ground mm (ft.in) 2360 (7'9") 2745 (9') 3170 (10'5") 3285 (10'9")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA4D102E SA6D102E SA6D114E S6D125E
No.of cylinders- mm (in) 4-102 120 6-102 120 6-114 135 6-125 150
bore stroke (4.02 4.72) (4.02 4.72) (4.49 5.31) (4.92 5.91)
Piston displacement ltr. (cu.in) 3.92 (239) 5.88 (359) 8.27 (505) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/6 1/7 2/8 2/8
Width of shoe
Standard mm (in) 635 (25.0) 700 (27.6) 860 (33.9) 915 (36.0)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 165 (43.6) 250 (66.0) 337 (89.0) 406 (107.3)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : With inside power angle-tiltdozer.
*** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-11
Specifications CRAWLER-TYPE
(Low Ground Pressure Tractors) TRACTORS
Model
D65PX-15 D85PX-15
Item
OPERATING WEIGHT* kg (lb) 17330 (38,210) 23320 (51,410)
FLYWHEEL HORSEPOWER HP (kW)/RPM 190 (142)/1950 240 (179)/1900
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 3.9 (2.4) 3.6 (2.2)
2nd 6.8 (4.2) 6.0 (3.7)
3rd 10.6 (6.6) 10.0 (6.2)
4th
5th
Reverse 1st 5.0 (3.1) 4.7 (2.9)
2nd 8.6 (5.3) 7.9 (4.9)
3rd 13.4 (8.3) 12.7 (7.9)
4th
Max. drawbar pull kg (lb/kN)
DIMENSIONS:
Overall length mm (ft.in) 4425 (14'6") 4720 (15'6")
Overall width (w/o trunnion) mm (ft.in) 2965 (9'9") 3160 (10'4")
Overall height (at transport)*** mm (ft.in) 2300 (7'7") 3200 (10'6")
Track gauge mm (ft.in) 2050 (6'9") 2250 (7'5")
Length of track on ground mm (ft.in) 3285 (10'9") 3480 (11'5")
ENGINE: KOMATSU KOMATSU
Model SA6D125E SA6D125E
No.of cylinders- mm (in) 6-125 150 6-125 x 150
bore stroke (4.92 5.91) (4.9 x 5.9)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/8 2/8
Width of shoe
Standard mm(in) 915 (36.0) 910 (36")
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 415 (109.6) 490 (129)
* : Operating weight includes lubricants, coolant, full fuel tank, operator and standard equipment, without blade, rear attachment,
ROPS and canopy.
** : With inside power angle-tiltdozer.
*** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-12
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D61EX-12, D61EX-12 LT D65E-12 D65EX-15, D65EX-15 LT
kg x 103
lb x 103
US ton kN ton
kN
50
240 24
52
50
220 48 22
400 40
200 44 20
40
180 40 18
F1
F1
Drawbar Pull
Drawbar pull
160 36 16 300 30
32 30
140 14
F2
28
120 12
24 200 20
100 10 20
F2
20 F3
80 8
16
100 10
60 6 10
12
40 4 F3
8
20 4 2 0 0 0
0 2 4 6 8 10 12 km/h
0 0 0
0 2 4 6 8 10 12 14 km/h 0 1 2 3 4 5 6 7 mph
0 2 4 6 8 mph
Travel Speed
Travel speed FVDM1370
3 3
x kN x 10 lbkg x 10 kg
40
400
DRAWBAR PULL 80
30
300 60 F1
F2
200 20
40
F3
100 20 10
0 0 0
0 2 4 6 8 10 km/h
0 1 2 3 4 5 6 MPH
TRAVEL SPEED
FVBH0265
D85EX-15 D155A-5
USton
3 3
x kN x 10 lbkg x 10 kg
ton
kN
70 44 480 48
700
140
40 440 44
60
600
120 36 400 40
32 360 36
DRAWBAR PULL
50
500 100 320 32
DRAWBAR PULL
28 F1
F1
40 280 28
400 80 24
240 24
F2 20
300 60
30 200 20
16 F2
160 16
200 20 F3 12
40 120 12
8 80 8
100 20 10 F3
4 40 4
0 0 0 0 0 0
0 2 4 6 8 10 12 14 km/h
0 2 4 6 8 10 12 14 16 18 20km/h
0 1 2 3 4 5 6 7 8 MPH
0 2 4 6 8 10 12 MPH
TRABEL SPEED 0
FVBH0264 Travel speed
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-13
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D155AX-5 D155A-2A
USton
lb x 103
ton
kN
Ton
kN
44 480 48
500 120 50
40 440 44
450 100 45
36 400 40
400 90 40
32 360 36
80
320 32 350 35
DRAWBAR PULL
28 F1
70
Drawbar pull
280 28 300 30 F1
24
240 24 60
20 250 25
200 20 50
16 F2 200 20 F2
160 16 40
12 150 15
120 12 30
8 80 F3
8 F3 100 20 10
4 40 4 50 5
10
0 0 0 0 0 0
0 2 4 6 8 10 12 14 16 18 20km/h
0 2 4 6 8 10 12 14km/h
0 2 4 6 8 10 12 MPH 0 2 4 6 8 MPH
Travel speed Travel speed
D275A-5 D275AX-5
US ton kN ton US ton kN ton
60 60
60 60
F1 F1
500 500
50 50
50 F2 50 F2
400 40 400 40
40 40
Drawbar Pull
Drawbar Pull
F3 F3 F1 Lockup
300 300
30 30
30 30
F3 Lockup
100 10 100 10
10 10
0 0 0 0 0 0
0 2 4 6 8 10 12 km/h 0 2 4 6 8 10 12 km/h
0 1 2 3 4 5 6 7 mph 0 1 2 3 4 5 6 7 mph
Travel Speed Travel Speed
x 103 lb x 103 kg
Ton
kN
250
110 1200130 120
200 90 1000110100
F1 (T/C
80 900100 90
)
DRAWBAR PULL
F1
70 800 90 80
150
700 80 70
DRAWBAR PULL
60 F1(LOCK UP)
F2
70
(T/C
600 60
50
)
100 60
500 50 F2
40 50
F1 (LOCK UP)
F3 400 40 F2(LOCK UP)
30 (T
/C 40
)
50 F2 (LOCK UP) 300 30
20 30 F3
F3(LOCK UP)
200 20 20
F3 (LOCK UP)
10
100 10 10
0 0
0 2 4 6 8 10 12 km 0 0
0
0 2 4 6 8 10 12 14 km/h
0 1 2 3 4 5 6 7 8 mph 0 2 4 6 8 mph
TRAVEL SPEED TRAVEL SPEED
FZD00358
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-14
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D575A-3 D575A-3 SD
US ton
ton
kN
200 1800 180
120
1000 100 F2
100 F2(Lockup)
800 80
80
F3
600 60
60
400 40
40
20 200 20
0 0 0
0 2 4 6 8 10 12 km/h
0 2 4 6 MPH
TRAVEL SPEED FVBH0252
D61PX-12 D65PX-15
kg x 103
lb x 103
US ton kN ton
50
kN
240 24
52 50
220 48 22
400 40
200 44 20
40
180 40 18 F1
Drawbar Pull
F1 300
Drawbar pull
160 36 16 30
32 30
140 14 F2
28
120 12
200 20
24 20
100 10
F2 F3
20
80 8
16
100 10
60 6 10
12
40 4 F3
8
20 4 2 0 0 0
0 2 4 6 8 10 12 km/h
0 0 0
0 2 4 6 8 10 12 14 km/h 0 1 2 3 4 5 6 7 mph
0 2 4 6 8 mph
Travel Speed
Travel speed FVDM1370
D85PX-15
3 3
x kN x 10 lbkg x 10 kg
70
700
140
60
600
120
DRAWBAR PULL
50
500 100
F1
40
400 80
F2
300 30
60
200 20 F3
40
100 20 10
0 0 0
0 2 4 6 8 10 12 14 km/h
0 1 2 3 4 5 6 7 8 MPH
TRABEL SPEED
FVBH0264A
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-15
Ground Pressure CRAWLER-TYPE
TRACTORS
Definition: Ground pressure = tractor machine operating weight / total ground contact area where;
total ground contact area = length of track on ground shoe width 2.
1A-16
Ground Pressure CRAWLER-TYPE
TRACTORS
Definition: Ground pressure = tractor machine operating weight / total ground contact area where;
total ground contact area = length of track on ground shoe width 2.
1A-17
Shoe Application CRAWLER-TYPE
TRACTORS
Classification of the applications:
Classification Applicable terrain Limitations
These can be used over a wide range of general civil
Rocky terrain, general engineering work from crushed rock to preparation of
A terrain residential land. There is no particular limitation on their
use.
These are used for general earthmoving work where the
main work is scraping operations and pushing operations
when constructing golf courses, and overburden stripping
B General or soft terrain operations in coal mines.
They cannot be used on rocky ground. Be careful to avoid
traveling over rocks when carrying out operations on job
sites where there are scattered rocks.
These are used on soft ground where B classification
C Extremely soft terrain shoes would sink. These cannot be used on ground where
(swamps) there are scattered rocks.
NOTE: Select the proper shoe width for your customers, by taking the limitations described above into
consideration, (especially on wide shoes "B" and "C").
Select the narrowest possible shoes, depending on the flotation and ground pressure of the
machines. If the shoe is too wide, the load on the track shoe increases and results in bends in the
shoes, cracks in the links, breakage and slipping out of the pins and loosening of the bolts.
1A-18
Shoe Selection CRAWLER-TYPE
TRACTORS
Applications of different shoes in accordance with soil characteristics and working conditions.
Applicable soil and
Type of shoe Advantages Disadvantages Remarks
work
1 Single grouser shoe Because the shape of the Strength is somewhat Is available in
grouser is sharp, it easily reduced on rocky ground, various widths to
bites into the ground and and bending and other suit the softness
provides a large traction damage may occur. of the soil.
General soil force. The riding conform is a
excluding rocky little inferior to the triple
ground and double grouser shoes.
(for bulldozer) The road surface is liable
to be roughed.
The turning resistance is
large.
3 Tripple grouser shoe The three grousers have This shoe does not readily
Double grouser shoe the same height, hence bite into the ground, so the
Hard ground turning ability is good. traction force is low.
Suitable for both soft Good riding comfort is
and hard ground obtained as compared with
(for hydraulic a single grouser shoe.
excavator and dozer Rotating resistance is low.
shovel) Because three beams are
used, resistance to
bending is high.
4 Swamp shoe Because the cross-section Unsuitable for ground other Various widths are
of this shoe is an arc, the than swampy ground. available to suit
ground contact area is When used off swampy the degree of
large, and buoyancy is ground, it is liable to bend softness of the
easily obtained. due to its low strength. swampy ground.
This shoe is particularly
suitable for use in swamp
Swamp areas areas and areas with low
(for swamp dozer) ground pressure. The
ground surface is not
damaged when the
machine travels over it, so
it is suitable for soil
compaction and leveling
work.
1A-19
Shoe Selection CRAWLER-TYPE
TRACTORS
Applicable soil and
Type of shoe Advantages Disadvantages Remarks
work
7 Road liner (rubber) The surface of the shoe in Use in the following places
contact with the ground is will shorten the cutting life
made of rubber, so the of the rubber.
machine can travel on (1) Rocky ground
paved roads without (2) Cold areas
Paved road damaging the road (below -25C)
Indoor work surface. (3) Hot areas
Prevents noise when (above 65C)
machine is traveling. Because there are no
grouser, this shoe does not
bite into the ground.
1A-20
Roller Guard Installation CRAWLER-TYPE
TRACTORS
Local
add-on type
Determination criterion for
different working environments
Rocks and soil containing boulders The part is effective for prevention of catching pebbles.
and gravel (A and E)
Sand and sandy soil The part is effective for prevention of pitch squeaking.
(A, E and P)
Clayey soil (P and PL) Be careful when using this part since the soil sets when dried. (Note 1)
Swamp (PL and PLL) The part is effective for prevention of snaking of the track.
(Prevents side sliding of the track shoes.) (Note 1)
The part is effective for prevention of disengagement of the track shoes.
Slopes The part is effective for prevention of disengagement of the track shoes.
(Prevents side-sliding of the track shoes.)
(Note 1) Although soil and sand tend to enter less, once they enter, they may not be easily discharged
depending on the type of soil, so make the choice in consideration of past experience with machines
having been used in the subject area and of the working environments of the machine.
NOTE: Please consult your local distributor for availability of track rollers guard for the model that you
require.
1A-21
Roller guard installation CRAWLER-TYPE
TRACTORS
! Large Class
When using bulldozers, it is necessary to make most appropriate choices of the track roller guards fitting to
respective working environments. Given below are the criterion for the choices.
This chart provides clearer criterion for the choices in consideration of respective functions of different
types of track roller guards.
(Note 1) Although soil and sand tend to enter less, once they enter, they may not be easily discharged depending on the
type of soil, so make the choice in consideration of past experience with machines having been used in the
subject area and of the working environments of the machine.
NOTE: Please consult your local distributor for availability of track rollers guard for the model that you
require.
1A-22
Upper Attachment CRAWLER-TYPE
TRACTORS
OVERALL HEIGHT
G.L
1A-23
MEMO
SECTION 1B
BULLDOZERS
CONTENTS
Blade selection ......................................................... 1B-2
Blade availability ...................................................... 1B-3
Blade specifications:
Straight-tiltdozer .................................................. 1B-5
Angledozer ........................................................... 1B-6
Power angle-tiltdozer .......................................... 1B-8
Semi-U-tildozer .................................................. 1B-11
U-tildozer ............................................................ 1B-13
Super dozer ........................................................ 1B-14
Coal dozer .......................................................... 1B-15
Production .............................................................. 1B-16
1B-1
Blade Selection BULLDOZERS
Straight-tilltdozer
Having a high HP/ cutting edge length, this blade
has an aggressive penetration. This blade also has a
high HP/loose cubic yards for easy handling of
heavy materials. The tilting function of this blade
increases production and versatility. With a sturdy
construction, this blade is suitable for powerful
cutting and dozing, especially heavy cutting on rocky
ground.
Straight dozer
This blade has the same structure and functions but
is not equipped with a tilt-cylinder.
Angle dozer
The blade can be set straight or angled to both
sides. Plowing earth or snow to one side is possible
by angling the blade.
Useful for road construction, back filling etc.
Power angle-tiltdozer
Power angling and tilting of the blade are possible
from the operator seat. This blade is applicable for
versatile works such as grading, back filling,
spreading and light land clearing
Dual tiltdozer
The blade has two tilt cylinders on both sides. An
optimum blade cutting angle for all types of materials
and ground inclinations can be selected for
increased loads and consequently increased
production. A fast tilt speed and a large tilt angle also
concentrate blade force where maximum
penetration is needed.
Semi U-tiltdozer
The blade combines penetration ability of straight
blade with increased load capacity provided by short
wings which include only the end bits.
U-tiltdozer
The wings on this blade minimize material spillage.
Since this blade has a lower HP/loose cubic yards
than a straight-tiltdozer, this blade is suitable for
moving lighter or loose materials over long
distances.
Suitable works are land reclamation, stockpiling and
other similar jobs.
Coal dozer
Specialized blade for pushing coal, with larger width FVBH0199
and deep angled wings.
Rake-dozer
Having teeth, this blade provides good penetration
into the soil for removal of stumps, roots and rocks.
1B-2
Blade Availability BULLDOZERS
1B-3
Blade Availability BULLDOZERS
1B-4
Blade Specifications BULLDOZERS
Straight-tiltdozer
F G.L
B A
Model
D65E-12 D65P-12 D65EX-15 D65PX-15
Item
OPERATING WEIGHT* kg (lb) 17470 (38,510) 18860 (41,580) 19070 (42,040) 20700 (45,635)
BLADE CAPACITY LH2** m3 (yd3) 5.12 (6.70) 4.80 (6.28) 5.12 (6.70) 4.80 (6.28)
SAE 3.89 (5.09) 3.69 (4.83) 3.89 (5.09) 3.69 (4.83)
DIMENSION*
A Overall length mm (ft.in) 5260 (17'3") 5550 (18'3") 5260 (17'3") 5220 (18'1")
B Overall width mm (ft.in) 3415 (11'2") 3970 (13') 3415 (11'2") 3970 (13')
C Overall height mm (ft.in) 2980 (9'9") 3025 (9'11") 2990 (9'10") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.64 (9.10) 0.30 (4.27) 0.70 (9.95) 0.33 (4.69)
DOZER EQUIPMENT
Weight kg (lb) 2600 (5,730) 2620 (5,780) 2720 (5,995) 2740 (6,040)
(Includes hydraulic control unit) 2720 (6,000)
Length mm (ft.in) 3415 (11'2") 3970 (13') 3415 (11'2") 3970 (13'0")
Height mm (ft.in) 1225 (4'1") 1100 (3'7") 1225 (4'0") 1100 (3'7")
D Max. lift above ground mm (ft.in) 1100 (3'7") 1200 (3'11") 1105 (3'8") 1105 (3'8")
E Max. drop below ground mm (ft.in) 450 (1'6") 445 (1'6") 440 (1'5") 540 (1'9")
F Max. tilting adjustment mm (ft.in) 870 (2'10") 890 (2'11") 870 (2'10") 450 (1'6")
Digging angle degree 55 57 55 57
Model
D85E-SS-2A D85EX-15 D85PX-15
Item
OPERATING WEIGHT* kg (lb) 18230 (40,190) 24370 (53,730) 26690 (58,840)
BLADE CAPACITY LH2** m3 (yd3) 6.1 (7.98) 7.7 (10.07) 8.2 (10.73)
SAE 4.4 (5.76) 5.2 (6.8) 5.9 (7.7)
DIMENSION*
A Overall length mm (ft.in) 5615 (18'5") 5640 (18'6") 6065 (19'11")
B Overall width mm (ft.in) 3620 (11'11") 3715 (12'2") 4365 (14'4")
C Overall height mm (ft.in) 2980 (9'9") 3330 (10'11") 3330 (10'11")
Ground pressure kg/cm2 (PSI) 0.60 (8.53) 0.74 (10.5) 0.43 (6.1)
DOZER EQUIPMENT
Weight kg (lb) 2810 (6,190) 3305 (7,290) 3345 (7,375)
(Includes hydraulic control unit)
Length mm (ft.in) 3620 (11'11") 3715 (12'2") 4365 (14'4")
Height mm (ft.in) 1295 (4'3") 1436 (4'9") 1370 (4'6")
D Max. lift above ground mm (ft.in) 1070 (3'6") 1207 (4') 1222 (4')
E Max. drop below ground mm (ft.in) 590 (1'11") 540 (1'9") 568 (1'10")
F Max. tilting adjustment mm (ft.in) 920 (3') 750 (2'6") 500 (1'8")
Digging angle degree 55 55 55
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
1B-5
Blade Specifications BULLDOZERS
Angledozer
D
F
G.L
B A
Model
D31E-20 D68ESS-12*** D65E-12 D65EX-15
Item
OPERATING WEIGHT* kg (lb) 6020 (13,800) 19100 (42,110) 17690 (39,000) 19280 (42,110)
BLADE CAPACITY LH2** m3 (yd3) 1.35 (1.77) 3.6 (4.71) 4.80 (6.28) 4.80 (6.28)
SAE 1.00 (1.31) 2.6 (3.40) 3.55 (4.64) 3.55 (4.64)
DIMENSION*
A Overall length mm (ft.in) 3875 (12'9") 6280 (20'7") 5470 (17'11") 5470 (17'11")
B Overall width mm (ft.in) 2875 (9'5") 3970 (13') 3970 (13') 3970 (13')
C Overall height mm (ft.in) 2675 (8'9") 2780 (9'1") 2980 (9'9") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.50 (7.11) 0.53 (7.54) 0.65 (9.2) 0.71 (10.1)
DOZER EQUIPMENT
Weight kg(lb) 1020 (2,250) 2660 (5,860) 2820 (6,220) 2930 (5,860)
(Includes hydraulic control unit) 2930 (6,460)
Length mm (ft.in) 2875 (9'5") 3970 (13') 3970 (13') 3970 (13')
Height mm (ft.in) 685 (2'3") 950 (3'1") 1100 (3'7") 1100 (3'7")
D Max. lift above ground mm (ft.in) 960 (3'2") 1205 (3'11") 1180 (3'10") 1185 (3'11")
E Max. drop below ground mm (ft.in) 390 (1'3") 535 (1'9") 460 (1'6") 450 (1'6")
F Max. tilting adjustment mm (ft.in) 300 (11'8") 400 (1'4") 400 (1'4") 400 (1'4")
Digging angle degree 55 55 56.5 56.5
Model
D70LE-6 D85ESS-2 D85ESS-2A D85A-21
Item
OPERATING WEIGHT* kg (lb) 16940 (37,350) 19050 (42,000) 18850 (41,560) 23320 (51,410)
BLADE CAPACITY LH2** m3 (yd3) 4.5 (5.89) 5.0 (6.54) 5.0 (6.54) 5.6 (7.32)
SAE 3.1 (4.05) 3.4 (4.45) 3.4 (4.45) 3.9 (5.10)
DIMENSION*
A Overall length mm (ft.in) 5230 (17'2") 5930 (19'5") 5930 (19'5") 5810 (19'1")
B Overall width mm (ft.in) 4100 (13'5") 4370 (14'4") 4370 (14'4") 4365 (14'4")
C Overall height mm (ft.in) 3020 (9'11") 2560 (8'5") 2980 (9'9") 3365 (11')
Ground pressure kg/cm2 (PSI) 0.53 (7.54) 0.52 (7.39) 0.62 (8.82) 0.73 (10.38)
DOZER EQUIPMENT
Weight kg (lb) 3430 (7560) 3430 (7,560) 4610 (10,160)
(Includes hydraulic control unit)
Length mm (ft.in) 4100 (13'5") 4370 (14'4") 4370 (14'4") 4365 (14'4")
Height mm (ft.in) 1050 (3'5") 1070 (3'6") 1070 (3'6") 1130 (3'8")
D Max. lift above ground mm (ft.in) 1130 (3'8") 1255 (4'1") 1255 (4'1") 1310 (4'4")
E Max. drop below ground mm (ft.in) 585 (1'11") 485 (1'7") 485 (1'7") 560 (1'10")
F Max. tilting adjustment mm (ft.in) 400 (1'4") 400 (1'4") 400 (1'4") 500 (1'8")
Digging angle degree 55 56 56 55.6
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : With winch and canopy
1B-6
Blade Specifications BULLDOZERS
Angledozer
D
F
G.L
B A
Model
D85A-21B D85E-21 D155A-2A D155A-5
Item
OPERATING WEIGHT* kg (lb) 22860 (50,400) 23680 (52,200) 34390 (75,820) 33040 (72,840)
BLADE CAPACITY LH2** m3 (yd3) 5.6 (7.32) 5.6 (7.32) 6.30 (8.64) 7.00 (9.16)
SAE 3.9 (5.10) 3.9 (5.10) 4.58 (5.99) 4.9 (6.4)
DIMENSION*
A Overall length mm (ft.in) 6100 (20') 6020 (19'9") 6620 (21'9") 6502 (21'4")
B Overall width mm (ft.in) 4365 (14'4") 4365 (14'4") 4850 (15'11") 4850 (15'11")
C Overall height mm (ft.in) 3365 (11') 3365 (11') 3725 (12'3") 3395 (11'2")
Ground pressure kg/cm2 (PSI) 0.75 (10.67) 0.69 (9.81) 0.975 (13.86) 0.92 (13.1)
DOZER EQUIPMENT
Weight kg (lb) 4610 (10,160) 4610 (10,160) 6520 (14,370) 5140 (11,330)
(Includes hydraulic control unit)
Length mm (ft.in) 4635 (14'4") 4365 (14'4") 4850 (15'11") 4850 (15'11")
Height mm (ft.in) 1130 (3'8") 1130 (3'8") 1140 (3'9") 1205 (3'11")
D Max. lift above ground mm (ft.in) 1310 (4'4") 1425 (4'8") 1520 (5') 1295 (4'3")
E Max. drop below ground mm (ft.in) 560 (1'10") 580 (1'11") 630 (2'1") 745 (2'5")
F Max. tilting adjustment mm (ft.in) 500 (1'8") 500 (1'8") 400 (1'4") 520 (1'8")
Digging angle degree 55.6 55.6 55 55
Model
D155AX-5
Item
OPERATING WEIGHT* kg (lb) 33540 (73,940)
DOZER EQUIPMENT
Weight kg (lb) 5140 (11,330)
(Includes hydraulic control unit)
Length mm (ft.in) 4850 (15'11")
Height mm (ft.in) 1205 (3'11")
D Max. lift above ground mm (ft.in) 1295 (4'3")
E Max. drop below ground mm (ft.in) 745 (2'5")
F Max. tilting adjustment mm (ft.in) 520 (1'8")
Digging angle degree 55
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
1B-7
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D31E-20 D31EX-21 D31PX-21 D37E-5
Item
OPERATING WEIGHT* kg (lb) 6270 (3820) 6820 (15,040) 7340 (16,180) 6490 (14,310)
BLADE CAPACITY LH2** m3 (yd3) 1.70 (2.22) 1.74 (2.28) 1.80 (2.35) 2.13 (2.79)
SAE 1.26 (1.65) 1.26 (1.65) 1.34 (1.75) 1.49 (1.95)
DIMENSION*
A Overall length mm (ft.in) 3710 (12'2") 4015 (13'2") 3995 (13'1") 3950 (13')
B Overall width mm (ft.in) 2415 (7'11") 2435 (8'0") 3200 (10'6") 2415 (7'11")
C Overall height mm (ft.in) 2675 (8'9") 2700 (8'10") 2700 (8'10") 2675 (8'9")
Ground pressure kg/cm2 (PSI) 0.50 (7.11) 0.42 (5.97) 0.28 (3.98) 0.44 (6.26)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 1030 (2,270) 1045 (2,300) 1120 (2,470) 1040 (2,290)
(Includes hydraulic control unit)
Length mm (ft.in) 2415 (7'11") 2435 (8'0") 3200 (10'6") 2415 (7'11")
Height mm (ft.in) 840 (2'9") 845 (2'9") 750 (2'6") 940 (3'1")
Max. lift above ground mm (ft.in) 865 (2'10") 860 (2'10") 855 (2'10") 865 (2'10")
D
Max. drop below ground mm (ft.in) 370 (1'3") 385 (1'3") 380 (1'3") 370 (1'3")
E
Max. tilting adjustment mm (ft.in) 350 (1'2") 330 (1'1") 435 (1'5") 350 (1'2")
F
Angling angle (L/R) degree 25/25 25/25 25/25 25/25
Model
D37EX-21 D37PX-21 D39EX-21 D39PX-21
Item
OPERATING WEIGHT* kg (lb) 7100 (15,650) 7460 (16,450) 8210 (18,100) 8590 (18,940)
BLADE CAPACITY LH2** m3 (yd3) 2.48 (3.24) 2.69 (3.52) 2.40 (3.14) 2.60 (3.40)
SAE 1.69 (2.21) 1.83 (2.39) 1.90 (2.49) 2.10 (2.75)
DIMENSION*
A Overall length mm (ft.in) 4015 (13'2") 3995 (13'1") 4200 (13'9") 4200 (13'9")
B Overall width mm (ft.in) 2720 (8'11") 3250 (10'8") 2740 (9'0") 3330 (10'11'')
C Overall height mm (ft.in) 2700 (8'10") 2700 (8'10") 2775 (9'1") 2775 (9'1")
Ground pressure kg/cm2 (PSI) 0.40 (5.69) 0.28 (3.98) 0.38 (5.40) 0.29 (4.12)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 1090 (2,400) 1150 (2,540) 1260 (2,780) 1360 (3,000)
(Includes hydraulic control unit)
Length mm (ft.in) 2720 (8'11") 3250 (10'8") 2740 (9'0") 3330 (10'11")
Height mm (ft.in) 940 (3'1") 895 (2'11") 980 (3'3") 910 (3'0")
D Max. lift above ground mm (ft.in) 860 (2'10") 855 (2'10") 890 (2'11") 890 (2'11")
E Max. drop below ground mm (ft.in) 385 (1'3") 380 (1'3") 440 (1'5") 440 (1'5")
F Max. tilting adjustment mm (ft.in) 375 (1'3") 445 (1'6") 395 (1'4") 480 (1'7")
1B-8
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D41E-6 D41E-6*** D41P-6 D41P-6***
Item
OPERATING WEIGHT* kg (lb) 10590 (23,345) 10670 (25,145) 11170 (24,625) 11250 (24,805)
BLADE CAPACITY LH2** m3 (yd3) 3.4 (4.45) 3.8 (4.92) 3.4 (4.45) 3.8 (4.92)
SAE 2.6 (3.40) 2.9 (3.79) 2.6 (4.12) 2.9 (3.79)
DIMENSION*
A Overall length mm (ft.in) 4880 (16') 4880 (16') 4880 (16') 4880 (16')
B Overall width mm (ft.in) 3045 (10') 3350 (11') 3045 (10') 3350 (11')
C Overall height mm (ft.in) 2675 (8'9") 2675 (8'9") 2675 (8'9") 2675 (8'9")
Ground pressure kg/cm2 (PSI) 0.42 (5.97) 0.42 (5.97) 0.29 (4.12) 0.29 (4.12)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 1800 (3,965) 1880 (4,145) 1800 (3,965) 1880 (4,145)
(Includes hydraulic control unit)
Length mm (ft.in) 3045 (10') 3350 (11') 3045 (10') 3350 (11')
Height mm (ft.in) 1060 (3'6") 1060 (3'6") 1060 (3'6") 1060 (3'6")
D Max. lift above ground mm (ft.in) 1010 (3'4") 1010 (3'4") 1010 (3'4") 1010 (3'4")
E Max. drop below ground mm (ft.in) 490 (1'7") 490 (1'7") 490 (1'7") 490 (1'7")
F Max. tilting adjustment mm (ft.in) L:485 (1'7") L:530 (1'9") L:485 (1'7") L:530 (1'9")
R:645 (2'1") R:710 (2'4") R:645 (2'1") R:710 (2'4")
Angling angle (L/R) degree 55/25 55/25 55/25 30/25
Model
D61EX-12 D61EX-12*** D61EX-12 LT D61PX-12
Item
OPERATING WEIGHT* kg (lb) 15470 (34,110) 15630 (34,460) 16250 (35,820) 17180 (32,880)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 2340 (5,160) 2500 (5,510) 2480 (5,470) 2630 (5,800)
(Includes hydraulic control unit)
Length mm (ft.in) 3275 (10'9") 3860 (12'8") 3275 (10'9") 3860 (12'8")
Height mm (ft.in) 1200 (3'11") 1160 (3'10") 1200 (3'11") 1160 (3'10")
D Max. lift above ground mm (ft.in) 915 (3') 915 (3') 1045 (3'5") 1020 (3'4")
E Max. drop below ground mm (ft.in) 515 (1'8") 515 (1'8") 550 (1'10") 575 (1'11")
F Max. tilting adjustment mm (ft.in) 510 (1'8") 600 (2') 515 (1'8") 600 (2')
1B-9
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D68ESS-12*4
Item
OPERATING WEIGHT* kg (lb) 18,800 (41,500)
DOZER EQUIPMENT
Type Inside mount
Weight kg (lb) 2,360 (5,205)
(Includes hydraulic control unit)
Length mm (ft.in) 3276 (10'9")
Height mm (ft.in) 1200 (3'11")
D Max. lift above ground mm (ft.in) 1045 (3'5")
E Max. drop below ground mm (ft.in) 560 (1'10")
F Max. tilting adjustment mm (ft.in) 510 (1'9")
1B-10
Blade Specifications BULLDOZERS
Semi-U-tiltdozer
Model
D61EX-12 D65E-12 D65EX-15 D65EX-15 LT
Item
OPERATING WEIGHT* kg (lb) 15510 (34,190) 18500 (40,780) 19350 (42,600) 20090 (44,290)
BLADE CAPACITY LH2** m3 (yd3) 5.4 (7.1) 6.8 (8.9) 7.03 (9.19) 7.03 (9.19)
SAE 4.3 (5.6) 5.6 (7.3) 5.61 (7.34) 5.61 (7.34)
DIMENSION*
A Overall length mm (ft.in) 5050 (16'7") 5440 (17'10") 5440 (17'10") 5440 (17'10")
B Overall width mm (ft.in) 3175 (10'5") 3460 (11'4") 3460 (11'4") 3460 (11'4")
C Overall height mm (ft.in) 2945 (8'2") 2990 (9'10") 2990 (9'10") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.50 (7.11) 0.68(9.67) 0.71 (10.1) 0.60 (8.53)
DOZER EQUIPMENT
Weight kg (lb) 2380 (5,270) 2880 (6,350) 3000 (7,890) 3000 (7,890)
(Includes hydraulic control unit)
Length mm (ft.in) 3175 (10'5") 3460 (11'4") 3460 (11'4") 3460 (11'4")
Height mm (ft.in) 1300 (4'3") 1425 (4'8") 1425 (4'8") 1425 (4'8")
D Max. lift above ground mm (ft.in) 965 (3'2") 1105 (3'8") 1105 (3'8") 1105 (3'8")
E Max. drop below ground mm (ft.in) 535 (1'9") 440 (1'5") 440 (1'5") 440 (1'5")
F Max. tilting adjustment mm (ft.in) 690 (2'3") 465 (1'6") 855 (2'10") 855 (2'10")
1B-11
Blade Specifications BULLDOZERS
Semi-U-tiltdozer
Model D275A-5***
D375A-5 D375A-5*** D475A-3
Item D275AX-5***
OPERATING WEIGHT* kg (lb) 45270 (99,800) 60340 (133,030) 61590 (135,780) 91845 (202,480)
45270 (99,800)
BLADE CAPACITY LH2** m3 (yd3) 16.5 (21.6) 24.0 (31.4) 24.0 (31.4) 35.9 (47.0)
SAE 13.7 (17.9) 18.5 (24.2) 18.5 (24.2) 25.6 (33.5)
DIMENSION*
A Overall length mm (ft.in) 6930 (22'9") 7635 (25'1") 7635 (25'1") 8700 (28'7")
B Overall width mm (ft.in) 4300 (14'1") 4695 (15'5") 4695 (15'5") 5265 (17'5")
C Overall height mm (ft.in) 3965 (13'0") 4035 (13'3") 4035 (13'3") 4425 (14'6")
Ground pressure kg/cm2 (PSI) 1.09 (15.50) 1.29 (18.34) 1.31 (18.63) 1.48 (21.06)
1.09 (15.50)
DOZER EQUIPMENT
Weight kg (lb) 7590 (16,730) 10540 (23,240) 11790 (25,990) 16145 (35,590)
(Includes hydraulic control unit)
Length mm (ft.in) 4300 (14'1") 4695 (15'5") 4695 (15'5") 5265 (17'5")
Height mm (ft.in) 1960 (6'5") 2265 (7'5") 2265 (7'5") 2610 (8'7")
D Max. lift above ground mm (ft.in) 1450 (4'9") 1660 (5'5") 1660 (5'5") 1620 (5'4")
E Max. drop below ground mm (ft.in) 640 (2'1") 715 (2'4") 715 (2'4") 800 (2'7")
F Max. tilting adjustment mm (ft.in) 1140 (3'9") 1065 (3'6") 1165 (3'10") 1250 (4'1")
Model
D475A-3***
Item
OPERATING WEIGHT* kg (lb) 92290 (203,460)
DOZER EQUIPMENT
Weight kg (lb) 16590 (36,570)
(Includes hydraulic control unit)
Length mm (ft.in) 5265 (17'5")
Height mm (ft.in) 2610 (8'7")
D Max. lift above ground mm (ft.in) 1620 (5'4")
E Max. drop below ground mm (ft.in) 800 (2'7")
F Max. tilting adjustment mm (ft.in) 1410 (4'8")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-12
Blade Specifications BULLDOZERS
U-tiltdozer
D
F G.L
E
B A
Model
D375A-5 D375A-5*** D475A-3 D475A-3***
Item
OPERATING WEIGHT* kg (lb) 61590 (135,780) 61970 (136,620) 95060 (209,560) 95505 (210,550)
BLADE CAPACITY LH2** m3 (yd3) 26.3 (34.4) 26.3 (34.4) 42.3 (55.3) 42.3 (55.3)
SAE 22.0 (28.8) 22.0 (28.8) 34.4 (45.0) 34.4 (45.0)
DIMENSION*
A Overall length mm (ft.in) 8000 (26'5") 8000 (26'5") 9060 (29'9") 9060 (29'9")
B Overall width mm (ft.in) 5140 (16'10") 5140 (16'10") 6205 (20'4") 6205 (20'4")
C Overall height mm (ft.in) 4035 (13'3") 4035 (13'3") 4425 (14'6") 4425 (14'6")
Ground pressure kg/cm2 (PSI) 1.31 (18.63) 1.32 (18.77) 1.53 (21.76) 1.54 (21.90)
DOZER EQUIPMENT
Weight kg (lb) 11790 (25,990) 12170 (26,830) 19360 (42,680) 19805 (43,660)
(Includes hydraulic control unit)
Length mm (ft.in) 5140 (16'10") 5140 (16'10") 6205 (20'4") 6205 (20'4")
Height mm (ft.in) 2265 (7'5") 2265 (7'5") 2610 (8'7") 2610 (8'7")
D Max. lift above ground mm (ft.in) 1660 (5'5") 1660 (5'5") 1620 (5'4") 1620 (5'4")
E Max. drop below ground mm (ft.in) 715 (2'4") 715 (2'4") 800 (2'7") 800 (2'7")
F Max. tilting adjustment mm (ft.in) 1165 (3'10") 1260 (4'2") 1345 (4'5") 1660 (5'5")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-13
Blade Specifications BULLDOZERS
U-tiltdozer, Super dozer
U-tiltdozer
Model
D575A-3
Item
OPERATING WEIGHT* kg (lb) 121835
(268,600)
BLADE CAPACITY LH2** m3 (yd3) 46.7 (61.1)
SAE 45 (58.9)
DIMENSION*
A Overall length mm (ft.in) 9815 (21'8")
B Overall width mm (ft.in) 6800 (22'4")
C Overall height mm (ft.in) 4495 (14'9")
Ground pressure kg/cm2 (PSI) 1.56 (22.18)
DOZER EQUIPMENT
Weight kg (lb) 23385 (51,550)
(Includes hydraulic control unit)
Length mm (ft.in) 6800 (22'4")
Height mm (ft.in) 2600 (8'6")
D Max. lift above ground mm (ft.in) 1850 (6'1")
E Max. drop below ground mm (ft.in) 900 (2'11")
F Max. tilting adjustment mm (ft.in) 1600 (5'3")
D
F G.L
E
B
A
Super Dozer
Model
D475A-3 SD D575A-3 SD
Item
OPERATING WEIGHT* kg (lb) 97405 147010
(214,740) (324,100)
BLADE CAPACITY LH2** m3 (yd3) 69.0 (90.3)
SAE 45.0 (58.9) 60.0 (78.5)
DIMENSION*
A Overall length mm (ft.in) 8830 (29') 10395 (34'1")
B Overall width mm (ft.in) 6645 (21'10") 7400 (24'3")
C Overall height mm (ft.in) 4425 (14'6") 4495 (14'9")
Ground pressure kg/cm2 (PSI) 1.37 (19.48) 1.50 (21.33)
DOZER EQUIPMENT
Weight kg (lb) 20865 (46,000) 32430 (71,500)
(Includes hydraulic control unit)
Length mm (ft.in) 6645 (21'10") 7400 (24'3")
Height mm (ft.in) 3220 (10'7") 3250 (10'8")
D Max. lift above ground mm (ft.in) 1675 (5'6") 1750 (5'9")
E Max. drop below ground mm (ft.in) 1005 (3'4") 805 (2'8")
F Max. tilting adjustment mm (ft.in) 900 (2'11") 1000 (3'3")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-14
Blade Specifications BULLDOZERS
Coaldozer
F E
B A
FVBH0200
Model
D155AX-5 D155A-5 D155A-2A
Item
OPERATING WEIGHT* kg (lb) 33830 (74,580) 33330 (73,480) 34250 (75,510)
BLADE CAPACITY LH2** m3 (yd3) 21.5 (28.1) 21.5 (28.1) 17.2 (22.5)
SAE
DIMENSION*
A Overall length mm (ft.in) 6900 (22'8") 6900 (22'8") 7020 (23')
B Overall width mm (ft.in) 5300 (17'5") 5300 (17'5") 5300 (17'5")
C Overall height mm (ft.in) 3395 (11'2") 3395 (11'2") 3725 (12'3")
Ground pressure kg/cm2 (PSI) 0.74 (10.5)*** 0.73 (10.5)*** 0.97 (13.79)
DOZER EQUIPMENT
Type Coal dozer with Coal dozer with Coal dozer with
power tilt power tilt power tilt
Weight kg (lb) 4930 (10,870) 4390 (10,870) 6380 (14,070)
(Includes hydraulic control unit)
Length mm (ft.in) 5300 (17'5") 5300 (17'5") 5300 (17'5")
Height mm (ft.in) 2125 (7'0") 2125 (7'0") 1800 (5'11")
D Max. lift above ground mm (ft.in) 1495 (4'11") 1495 (4'11") 1620 (5'4")
E Max. drop below ground mm (ft.in) 565 (1'0") 565 (1'10") 545 (1'9")
F Max. tilting adjustment mm (ft.in) 1270 (4'2") 1270 (4'2") 1270 (4'2")
1B-15
Production BULLDOZERS
The estimated production curves give maximum production before correction and are based on the following
conditions.
1. 100% efficiency
2. 0.05 min time fixed (for gear shifting)
3. Machine cuts for 15 m (50 ft), then drifts blade load.
4. Gear
JOB EFFICIENCY
Good 0.83 (50 min out of an hour machine use)
Average 0.75 (45 min out of an hour machine use)
Rather poor 0.67 (40 min out of an hour machine use)
Poor 0.58 (35 min out of an hour machine use)
1B-16
Production BULLDOZERS
Lyd3/h Lm3/h
3600 2800
D475A D575A
3400 2600
D375A
3200
2400
3000
2800 2200
2600 2000
2400 D275A/AX
1800
HOURLY PRODUCTION
2200
1600
2000
1800 1400
1600 1200
1400 D155AX-5
1000
1200 D155A-5
1000 800
D155A-2
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0181
2600 2000
D275A/AX
2400
1800
HOURLY PRODUCTION
2200
1600
2000
1800 1400
1600 1200 D155A-2A
1400 D155AX-5
1000
1200 D155A-5
1000 800
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0182
1B-17
Production BULLDOZERS
4400 3400
4200 3200
4000
3000
3800
3600 2800
3400 2600
3200
2400
HOURLY PRODUCTION
3000
2800 2200
2600 2000
2400
1800
2200
1600
2000
1800 1400
1600 1200
1400
1000
1200
1000 800
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0183
1B-18
SECTION 1C
RIPPERS
CONTENTS
Features .................................................................... 1C-2
Ripper specification:
Multi-shank ripper (rigid type) ............................ 1C-3
Multi-shank ripper (variable type) ...................... 1C-5
Giant ripper (variable type) ................................. 1C-6
Ripper selection ....................................................... 1C-7
Ripper point selection ............................................. 1C-8
Production .............................................................. 1C-11
1C-1
Features RIPPERS
! Outstanding productivity
1. Superior ripping performance is achieved through a large operating weight, high engine output and a
conventional drive undercarriage.
2. Large maximum penetration depth provides high ripper production.
3. The unique linkage design enables the ripper point to draw an ideal locus during cylinder tilting for
effective excavation of embedded rocks.
In the KOMATSU linkage, the lift cylinder is mounted on the beam, causing the point to make an
ideal movement when the tilt cylinder is actuated.
Thus, the range of digging angles practically available is wider than the conventional type range,
giving excellent digging force.
This patented mechanism lets the point make an ideal After penetrating the ground, the point makes longer
movement when the tilt cylinder is in action, which in turn downward movements, resulting in a narrow digging
gives rise to a large digging force over the entire digging angle range in which materials can be lifted or rolled out.
angle range.
(Relationship between the digging angle and the digging force when the tilt cylinder is in action)
! Minimum downtime
1. Large sectional area of the beam extends service life.
2. The forged ripper points are sharpened for excellent penetration and long service life.
! Easy operation
1. Optional pin puller facilitates change in digging depth.
The optional pin puller mechanism functions to insert or remove the pin from its hole. This is
accomplished with a hydraulic cylinder and can be accomplished by an experienced operator, from within
the cab. This feature thus provides a time savings benefit.
1C-2
Specifications RIPPERS
Multi-shank Ripper (Rigid type)
B
A
B
D
G.L
E C
F
Model
D31E-20 D31EX-21 D37EX-21 D39EX-21
Item
RIPPER EQUIPMENT:
Type Tool bar Tool bar Tool bar Tool bar
Weight** kg (lb) 420 (930) 575 (1,270) 575 (1,270) 575 (1,270)
A Beam length mm (ft.in) 1529 (5'0") 1530 (5'0") 1530 (5'0") 1530 (5'0")
Shanks:
No. of shanks 5 5 5 5
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 700 (2'4") 700 (2'4") 700 (2'4") 700 (2'4")
Pitch (2 shank) mm (ft.in)
Digging angle degree Fixed Fixed Fixed
Fixed
C Max. digging depth mm (ft.in) 310 (1') 315 (1'0") 315 (1'9") 245 (9.7")
D Max. lift above ground mm (ft.in) 440 (1'5") 435 (1'5") 435 (1'5") 505 (1'8")
E Ripper point reach mm (ft.in) 1190 (3'11") 1313 (4'7") 1178 (3'10") 1079 (3'6")
F Tail length mm (ft.in) 1336 (4'5") 1484 (4'10") 1349 (4'5") 1276 (4'2")
HYDRAULIC CONTROL UNIT* kg (lb) 20 (40) 20 (40) 20 (40) 20 (40)
Model D65E-12
D41E-6 D61EX-12 D85ESS-2A
Item D65EX-15
RIPPER EQUIPMENT:
Type Parallelogram Parallelogram Parallelogram Parallelogram
Weight** kg (lb) 810 (1,790) 1645 (3,630) 1680 (3,700) 1680 (3,700)
A Beam length mm (ft.in) 1555 (5'1") 2170 (7'1") 2170 (7'1") 2170 (7'1")
Shanks:
No. of shanks 3 3 3 3
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 700 (2'4") 950 (3'1") 950 (3'1") 950 (3'1")
Pitch (2 shank) mm (ft.in) 1400 (4'7") 1900 (6'3") 1900 (6'3") 1900 (6'3")
Digging angle degree 55 55, 45 55, 45 2-stage
2-stage 2-stage adjustable
adjustable adjustable
Digging depth 2-stage 3-stage 3-stage 3-stage
adjustable adjustable adjustable adjustable
Max. digging depth mm (ft.in) 495 (1'7") 665 (2'2") 595 (1'11") 595 (1'11")
C Max. lift above ground mm (ft.in) 365 (1'2") 565 (1'10") 640 (2'1") 640 (2'1")
D Ripper point reach mm (ft.in) 1145 (3'9") 1289 (4'3") 1300 (4'3") 1295 (4'3")
E Tail length mm (ft.in) 1510 (4'11") 1788 (5'10") 1795 (5'11") 1790 (5'10")
F
HYDRAULIC CONTROL UNIT* kg (lb) 20 (40) 35 (80) 70 (150) 70 (150)
1C-3
Specifications RIPPERS
Multi-shank Ripper (Rigid type)
B
A
B
D
G.L
E C
F
Model
D85EX-15 D155A-2A
Item
RIPPER EQUIPMENT:
Type Parallelogram Parallelogram
Weight** kg (lb) 2500 (5,520) 4870 (10,740)
A Beam length mm (ft.in) 2227 (7'4") 2420 (7'11")
Shanks:
No. of shanks 3 3
Tooth point Replaceable Reversible
B Pitch (3 shank) mm (ft.in) 1000 (3'3") 1120 (3'8")
Pitch (2 shank) mm (ft.in) 2000 (6'7") 2240 (7'4")
Digging angle degree 54.5 45
1C-4
Specifications RIPPERS
Multi-shank Ripper (Variable type)
B
A
B
D
G.L
E C
F
Model
D475A-3
Item
RIPPER EQUIPMENT:
Type Variable
digging angle
type
Weight** kg (lb) 9720 (21,430)
A Beam length mm (ft.in) 3085 (10'1")
Shanks:
No. of shanks 3
Tooth point Replaceable
B Pitch (3 shank) mm (ft.in) 1385 (4'7")
Pitch (2 shank) mm (ft.in) 2770 (9'1")
Digging angle degree Std:45
Stepless
adjustable
1C-5
Specifications RIPPERS
Giant Ripper (Variable type)
B
G.L
C
A
Model D155A-5
D155A-2A D275A-5 D275AX-5
Item D155AX-5
RIPPER EQUIPMENT:
Type Variable Variable Variable Variable
digging angle digging angle digging angle digging angle
type type type type
Weight** kg (lb) 2760 (6,080) 4830 (10,650) 4600 (10,140) 3600 (7,940)
Shanks:
No. of shanks 1 1 1 1
Tooth point Reversible Replaceable Replaceable Replaceable
Digging angle degree Std:49 Std:45 Std:42.7
Stepless Stepless Stepless Stepless
adjustable adjustable adjustable adjustable
Model
D375A-5 D475A-3 D575A-3
Item
RIPPER EQUIPMENT:
Type Variable Variable Variable
digging angle digging angle digging angle
type type type
Weight** kg (lb) 5470 (12,060) 7360 (16,230) 10530 (23,210)
Shanks:
No. of shanks 1 1 1
Tooth point Replaceable Replaceable Replaceable
Digging angle degree Std:45 Std:45 Std:45
Stepless Stepless Stepless
adjustable adjustable adjustable
1C-6
Ripper Selection RIPPERS
M-3 Adaptable to hard or soft rock by increasing or G-3 Deep penetration and large distance from shank
decreasing the number of shanks. to rear of bulldozer make it possible to handle large
rocks.
G-4 Pin puller simplifies changing shank length.
1C-7
Ripper Point Selection RIPPERS
Various types of ripper points are available, and the general standards for selection according to the
type of use are given below.
When combining of these categories, 4~7 types of points are available for each model.
If the point does not dig into the rock, but slips on the rock surface, the friction heat between the point and
rock causes an extreme rise in temperature of the point, thus reducing point hardness.
There is a close relationship between hardness and wear: The higher the hardness, the less the wear.
Also there is a close relationship between
increased temperature of the point and excellent Red
wear of the point (abnormal wear). Hardness and wear life
Hardness
Yellow
retains its hardness better than the yellow point
Wear life
Has a wear life 1.5 ~ 2.0 times greater than the short point, but its strength is inferior to
Long
the short point because of its extra length.
Compared with the long point, it has superior strength, but has inferior wear life compare to
Short
the long point.
This has a self-sharpening shape, so it always retains its cutting edge, and provides a
long life on jobsites where there is soft rock and penetration ability is not required.
The rib provided only on the top surface wears gradually under the flow of the soil, and there
is no change in the penetration surface pressure.
Penetration surface pressure
10 Symmentric type
Symmentric type
Non symmentric type
10
Turn
Symmetric type
(can be turned) Necessary surface
5 pressure (hard rock)
0
Distance from tip (L) mm
1C-8
Ripper Point Selection RIPPERS
The table below gives a summary of the features of each type of point.
Strength,
Seismic Wear Abnormal
Length Color Shape resistance to Penetration Cost
velocity tolerance wear
impact
Symmetric
type
Yellow 4
Non
symmetric
type No
Short particular
Symmetric limit
type
Red 2
Non
symmetric
type
Non
Yellow symmetric (As a 3
type guideline)
Long
Non Max.
Red symmetric 1500m/sec 1
type
Key : Good, : Average, : Poor
Cost: 1 (Most expensive), 4 (Least expensive)
1C-9
Ripper Point Selection RIPPERS
Step 1 Selection
Yes
Install standard point B Step 3 A
(Check for
Step 2 crack or
(Check wear) breakge)
B
Yes
Yes
Yes
(Over 70%) No
Does rock have Does impact
high quartz Install standard point B force causes C
contents? breakage?
*1[Whole point is worn evenly]
Excessive generation No
of heat at point (Less than 70%)
[Only tip of point is worn]
Does impact No
Install point D force causes D
breakage?
Yes
E
D155AX-5
D275AX-5
D85EX-15
D155A-5
D155A-2
D275A-5
D375A-5
D475A-3
Selection Type of
Hardness Features Shape
rock
1C-10
Production RIPPERS
Not all material can be ripped. Whether or not a rock Characteristics which determine the ease of
can be ripped can be determined by any of the rippability are summarized below.
following methods:
1) By the type of rock Favorable rock for ripping
2) By an indoor rock test
Stratified
3) By a field rock test Weathered
4) By a digging test with the ripper in the field. Brittle, crystalline nature
High degree of laminations or thin layers.
Method 4) is most effective. If the user has no Fractured
experience in ripping, an actual ripping operation Faults or planes of weakness.
should be demonstrated for the user by an operator
experienced in ripping. Methods 1) and 3) are Unfavorable rock for ripping
described below :
Fine-grained with a solid cementing agent.
Determination of rippability by type Moisture, which tends to solidify the rock surface layer.
of rock
Lacking planes of weakness
Massive and homogeneous
Rocks are classified into sedimentary (aqueous), Non-crystalline and not brittle
igneous, and metamorphic. The following general
rules apply:
Determination of rippability by in-
1) Sedimentary rocks such as sandstone, limestone, the-field rock test.
and shale can be ripped easily. Sedimentary
rocks are usually found stratified in layers which Seismic wave velocity tests are used to estimate the
vary in thickness. The thinner the layers, the rippability of rock. In this test, an artificial earthquake
easier it is to rip them. is introduced and the travel speeds of seismic waves
through different kinds of sub-surface materials are
2) Igneous rocks such as granite, basalt, and
measured. Thus the degree of consolidation,
andesite are not found in distinct layers or
thickness of sub-surface layers, hardness, degree of
cleavage planes, and this makes them difficult to
rip. fracturing, stratification, and weathering can be
determined .
3) Metamorphic rocks such as gneiss, schist, and
quartzite vary in rippability according to the
degree of stratification or cleavage. The chart below compares ripper performance to
seismic velocities. It should be used ONLY A
Rippability depends not only on the type of rock, but
also on the degree of weathering or fracturing. ROUGH GUIDE, because ripper performance is
subject to many other conditions.
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
1C-11
Production RIPPERS
The chart below compares ripper performance to seismic velocities. It should be used ONLY A ROUGH
GUIDE, because ripper performance is subject to many other conditions.
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0260
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0261
1C-12
Production RIPPERS
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0262
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0263
1C-13
Production RIPPERS
HOURLY PRODUCTION
(Standard production) (Job efficiency) 2000
D275A
1400
Operation conditions E
0.75 1000 D155AX
Good
(45 min out of an hour use) 1200
0.58
Average 800
(35 min out of an hour use)
0.50 D155A
Rather poor
(30 min out of an hour use) 800 600
0.40
Poor
(25 min out of an hour use)
400
400
200
0
500 1000 1500 2000 2500 3000 4000 (m/s)
2000 4000 6000 8000 10000 (ft/s)
SEISMIC WAVE VELOCITY
FVBH0184
Conditions
1) Ripping production only
2) Bulldozers with single shank rippers
3) 100% job efficiency
1C-14
SECTION 1D
TOWING WINCHES
CONTENTS
Specifications ........................................................... 1D-2
1D-1
Specifications TOWING WINCHES
A
B
C
FVBH0201
Model D65E/P-12
D31E-20 D37E-5 D61EX-12
Item D65EX/PX-15
Type Wet type Wet type Wet type Wet type
Weight kg (lb) 490 (1,080) 500 (1,100) 1290 (2,840) 1290 (2,840)
DIMENSION
A: Ground to drum center mm (ft.in) 762 (2'6") 762 (2'6") 1145 (3'9") 1201 (3'11")
B: Ground to hitch center mm (ft.in) 474 (1'7") 474 (1'7") 650 (2'2") 650 (2'2")
C: Sprocket center to drum center mm (ft.in) 600 (2'0") 760 (2'6") 945 (3'1") 907 (3'0")
Drum dimension:
Length mm (ft.in) 740 (2'5") 740 (2'5") 1005 (3'4") 1005 (3'4")
Width mm (ft.in) 750 (2'6") 750 (2'6") 1070 (3'6") 1070 (3'6")
Height mm (ft.in) 625 (2'1") 625 (2'1") 980 (3'3") 980 (3'3")
Drum diameter mm (ft.in) 180 (7") 180 (7") 254 (10') 254 (10")
Flange diameter mm (ft.in) 400 (1'4") 400 (1'4") 510 (1'8") 510 (1'8")
Drum width mm (ft.in) 230 (9") 230 (9") 320 (1'1") 320 (1'1")
Cable:
Cable dia. length mm m 16 40 16 40 26 65 26 73
(in ft) (0.63 131) (0.63 131) (1.02 213) (1.02 240)
Performance:
Line speed:
Bare drum m/min. F 33 (108) F 33 (108) F27 (89) F28 (92)
(FPM) R 36 (118) R 36 (118) R60 (197) R59 (194)
Full drum m/min. F 65 (213) F 65 (213) F46 (151) F48 (157)
(FPM) R 71 (233) R 71 (233) R104 (341) R102 (335)
Line pull:
Bare drum kg (lb) 9600 (21,160) 10300 (22,710) 26080 (57,510) 31400 (69,220)
Full drum kg (lb) 4900 (10,800) 5200 (11,460) 15050 (33,190) 18200 (40,120)
Model
D68ESS-12 D70LE-8 D85ESS-2 D85ESS-2A
Item
Type Wet type Dry type Wet type Wet type
Weight kg (lb) 1570 (3,455) 1390 (3,060) 1290 (2,840) 1290 (2,840)
DIMENSION
A: Ground to drum center mm (ft.in) 1145 (3'9") 1188 (3'11") 1201 (3'11") 1201 (3'11")
B: Ground to hitch center mm (ft.in) 610 (2') 612 (2'0") 650 (2'2") 650 (2'2")
C: Sprocket center to drum center mm (ft.in) 945 (3'1") 934 (3'1") 1066 (3'6") 1066 (3'6")
Drum dimension:
Length mm (ft.in) 975 (3'2") 1035 (3'5") 1005 (3'4") 1005 (3'4")
Width mm (ft.in) 996 (3'3") 1135 (3'9") 1070 (3'6") 1070 (3'6")
Height mm (ft.in) 980 (3'3") 910 (3') 980 (3'3") 980 (3'3")
Drum diameter mm (ft.in) 254 (10") 290 (11.4") 254 (10") 254 (10")
Flange diameter mm (ft.in) 510 (1'8") 560 (1'10") 510 (1'8") 510 (1'8")
Drum width mm (ft.in) 320 (1'1") 335 (1'1") 320(1'1") 320 (1'1")
Cable:
Cable dia. length mm m 28.6 x 50 26 65 26 73 26 73
(in ft) (1.12 x 165) (1.02 213) (1.02 240) (1.02 240)
Performance:
Line speed:
Bare drum m/min. F28 (92) F30 (98) F28 (92) F28 (92)
(FPM) R63 (207) R50 (164) R63 (207) R63 (207)
Full drum m/min. F48 (157) F30 (98) F48 (157) F48 (157)
(FPM) R110 (361) R50 (164) R110 (361) R110 (361)
Line pull:
Bare drum kg (lb) 26910 (59,322) 26400 (58,200) 31400 (69,220) 31400 (69,220)
Full drum kg (lb) 15570 (34,323) 15600 (34,390) 18200 (40,120) 18200 (40,120)
1D-2
SECTION 1E
PIPELAYERS
CONTENTS
Features .................................................................... 1E-2
Specifications ........................................................... 1E-3
Lifting capacity ......................................................... 1E-4
1E-1
Features PIPELAYERS
Safe operation
Komatsu pipelayers offer safety features to keep
operators working confidently.
All machines are standardly equipped with an
automatic boom maximum stopper device.
There is a free-fall setting on the hook control
lever for use during an emergency.
Komatsu pipelayers have a closed-type winch
brake that prevents slips during operation in wet
weather.
Because the hook wires are located away from
the operator, danger in the event of a wire cut is
minimized.
1E-2
Specifications PIPELAYERS
Model
D85C-21 D155C-1 D355C-3
Item
OPERATING WEIGHT kg (lb) 30050 (66,250) 45800 (100,970) 57850 (127,540)
MAX. LlIFTING CAPACITY kg (lb/kN) 41000 70000 92000
(90,390/402) (154,320/686) (202,820/902)
FLYWHEEL HORSEPOWER HP (kW)/RPM 225 (168)/2000 320 (239) /2000 360 (269)/2000
DIMENSIONS:
Overall length mm (ft.in) 4805 (15'9") 5840 (19'2") 6030 (19'9")
Overall width* mm (ft.in) 3490 (11'5") 3760 (12'4") 4405 (14'5")
Overall height mm (ft.in) 3640 (11'11") 3845 (12'7") 3925 (12'11")
Track gauge mm (ft.in) 2250 (7'5") 2380 (7'10") 2550 (8'4")
Length of track on ground mm (ft.in) 2730 (8'11") 3620 (11'11") 3750 (12'4")
Ground contact area 2
cm (sq.in) 33300 (5,160) 51400 (7,967) 64500 (10,000)
Ground pressure kg/cm2(PSI/kPa) 0.90 (12.8/88.3) 0.89 (12.66/87.3) 0.90 (12.8/88.3)
PIPELAYING EQUIPMENT:
Hook speeds:(bare drum) m/min (FPM)
Raise 1st 9.6 (31.5) 6.0 (19.7) 5.5 (18.0)
2nd 21.7 (71.2) 13.8 (45.3) 12.7 (41.7)
Lower 1st 9.3 (30.5) 4.8 (15.7) 4.5 (14.8)
2nd 21.1 (69.2) 11.1 (36.4) 10.2 (33.5)
Boom: Length mm (ft.in) 5500 (18'1") 6200 (20'4") 7300 (23'11")
Winch: Type H.C** H.C** H.C**
ENGINE: KOMATSU KOMATSU KOMATSU
Model S6D125 SA6D140 SA6D140
No.of cylinders- mm 6-125 150 6-140 165 6-140 165
bore stroke (in) (4.92 5.91) (5.51 6.50) (5.51 6.50)
Piston displacement Itr (cu.in) 11.04 (674) 15.24 (930) 15.24 (930)
PERFORMANCE:
Travel speeds km/h (MPH)
Forward/Reverse 1st 3.5 (2.2)/4.7 (2.9) 3.6 (2.2)/4.4 (2.7) 3.3 (2.1)/3.9 (2.4)
2nd 6.5 (4.0)/8.3 (5.2) 6.6 (4.1)/7.8 (4.8) 5.9 (3.7)/7.0 (4.3)
3rd 10.7(6.6)/13.3(8.3) 11.2(7.0)/12.4(7.7) 9.8(6.1)/11.0(6.8)
UNDERCARRIAGE:
No. of rollers (Carrier/track) 2/6 2/8 2/8
Shoe width
Standard mm (in) 610 (24.0) 710 (28.0") 860 (34.0)
Optional mm (in) 660 (26.0) 760 (30.0") 960 (38.0)
710 (28.0) 1010 (40.0)
* : Counterweight retracted, excluding boom
** : Hydraulically-controlled double-drum, reversible
D155C-1
3765 (12'4")
2070 (6'9")
1800
6780 (22'3")
(5'11")
3845 (12'7")
3770 (12'4")
3020 (9'11")
2845 (9'4")
G.L
(1'6")
460
3090 (10'2")
1E-3
Lifting Capacity PIPELAYERS
D85C-21
Hook height
LIFTING CAPACITY
7.3 m Boom
HOOK HEIGHT
Working radius
6.2 m Boom
5.5 m Boom MAX LIFT CAPACITY PER SAE J743b
MAX LOAD CAPACITY PER ANSI B30.14
7.3 m boom hook hight
6.2 m boom hook hight
5.5 m boom hook hight
warking radius
(ANSI B30.14)
FVBH0026
BOOM OVERHANG
D155C-1
Boom overhang
HOOK HEIGHT
10
85 0%
%
6.2 m boom
warking radius
BOOM OVERHANG
FVBH0046
D355C-3
3
Boom overhang
HOOK HEIGHT
85 1
% 00%
7.3 m boom
warking radius
BOOM OVERHANG
FVBH0047
1E-4
CONTENTS
INDEX
SECTION 2
CRAWLER-TYPE
DOZER SHOVELS
CONTENTS
Features .......................................................................2-2
Specifications ..............................................................2-4
Bucket specifications .................................................2-5
SAE loader rating ........................................................2-6
Loader and dump truck combination ........................2-7
Front attachments:
Rock bucket ............................................................2-8
Large bucket ...........................................................2-8
Multi-purpose bucket .............................................2-9
Side dump bucket .................................................2-10
Three-way bucket ................................................. 2-11
Production .................................................................2-12
2-1
Features CRAWLER-TYPE
DOZER SHOVELS
! High productivity
The high-power engine, highly efficient power train,
large drawbar pull provided by the conventional
undercarriage, and the high performance work
equipment provide high productivity.
2-2
Features CRAWLER-TYPE
DOZER SHOVELS
! Easy operation/operator comfort
Operator-oriented arrangement of control levers,
pedals, instruments and operator seat.
Walk-through operator compartment provides
easy boarding and exiting.
Operator seat can be adjusted to provide the
most suitable operating posture.
Wet-type, oil-cooled, foot-operated multiple-disc
steering clutches are interconnected with wet-
type steering brakes to allow easy steering/
braking actions.
Inching pedal assures smooth, easy starting and
stopping, precise inching approaches to
obstacles and impact digging.
All bucket movements-raising, lowering, dumping
and tilting can be carried out with a single control
lever.
Automatic bucket positioner assures accurate
bucket positioning.
Boom kick-out device ensures that repeated dig-
load operations are smoothly achieved.
[Except D31]
Oscillating-type equalizer bar suspension
absorbs vibrations and shocks for high mobility
and comfortable ride even on rugged terrain.
[Except D31]
Single-lever steering/directional change :
Single-lever controls all directional changes ;
forward, reverse, right-hand turn and left-hand
turn, ensuring easy and smooth operation.
In addition, pressure proportional control (PPC)
provides less operating effect and short lever
travel. (D31)
! Easy maintenance
Bolt-on type sprocket or segmented sprocket
teeth for easy in-field replacement.
2-3
Specifications CRAWLER-TYPE
DOZER SHOVELS
Model
D21S-7 D31S-20 D57S-1 D75S-5
Item
OPERATING WEIGHT* kg (lb) 3900 (8,600) 6780 (14,950) 15180 (33,470) 21220 (46,780)
FLYWHEEL HORSEPOWER HP (kW)/RPM 40 (29.5)/2450 70 (52)/2350 135 (101)/1900 200 (149)/2000
BUCKET CAPACITY m3 (cu.yd) 0.4 (0.5) 0.8 (1.0) 1.8 (2.4) 2.2 (2.9)
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 2.6 (1.6) 2.2 (1.4) 3.1 (1.9) 3.3 (2.0)
2nd 4.4 (2.7) 3.9 (2.4) 5.7 (3.5) 5.8 (3.6)
3rd 6.5 (4.0) 9.5 (5.9) 9.6 (6.0)
Reverse 1st 3.3 (2.1) 2.4 (1.5) 3.8 (2.4) 4.3 (2.7)
2nd 5.6 (3.5) 4.3 (2.7) 6.9 (4.3) 7.5 (4.5)
3rd 7.1 (4.4) 11.5 (7.1) 12.1 (7.5)
DIMENSIONS:
Overall length mm (ft.in) 3490 (11'4") 4090 (13'5") 5650 (18'6") 6200 (20'4")
Overall width (w/o trunnion) mm (ft.in) 1610 (5'3") 1790 (5'10") 2145 (7') 2410 (7'11")
Overall height (at transport)** mm (ft.in) 1775 (5'10") 2000 (6'7") 2475 (8'1") 2615 (8'7")
Track gauge mm (ft.in) 1310 (4'4") 1450 (4'9") 1700 (5'7") 1950 (6'5")
Length of track on ground mm (ft.in) 1685 (5'6") 1880 (6'2") 2425 (7'11") 2735 (9')
Ground pressure kg/cm2 0.38 (5.40/37.3) 0.54 (7.68/52.9) 0.78 (11.1/76.5) 0.84 (11.9/82.4)
(PSI/kPa)
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D94E S4D102E S6D108 S6D125E
Number of cylinders- mm (in) 4-94 100 4-102 120 6-180 130 6-125 150
bore stroke (3.70 3.94) (4.02 4.72) (4.25 5.12) (4.92 5.91)
Piston displacement ltr. (cu.in) 2.78 (169) 3.92 (239) 7.145 (436) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5 1/5 1/6 2/7
Width of Standard shoe mm (in) 300 (11.8) 330 (13.0) 400 (15.7) 460 (18.1)
CAPACITY(Refilled):
Fuel tank ltr. (U.S.Gal) 60 (15.9) 115 (30.4) 280 (74.0) 400 (106)
Model
D31Q-20
Item
OPERATING WEIGHT* kg (lb) 7120 (15,700)
FLYWHEEL HORSEPOWER HP (kW)/RPM 70 (52)/2350
BUCKET CAPACITY m3 (cu.yd) 0.8 (1.0)
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 2.2 (1.4)
2nd 3.9 (2.4)
3rd 6.5 (4.0)
Reverse 1st 2.4 (1.5)
2nd 4.3 (2.7)
3rd 7.1 (4.4)
DIMENSIONS:
Overall length mm (ft.in) 3990 (13'1")
Overall width (w/o trunnion) mm (ft.in) 2250 (7'5")
Overall height (at transport)** mm (ft.in) 2045 (6'9")
Track gauge mm (ft.in) 1650 (5'5")
Length of track on ground mm (ft.in) 1880 (6'2")
Ground pressure kg/cm2 0.31 (4.41/30.4)
(PSI/kPa)
ENGINE: KOMATSU
Model S4D102E
Number of cylinders- mm (in) 4-102 120
bore stroke (4.02 4.72)
Piston displacement ltr. (cu.in) 3.92 (239)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5
Width of Standard shoe mm (in) 600 (23.6)
CAPACITY(Refilled):
Fuel tank ltr. (U.S.Gal) 115 (30.4)
* Operating weight includes lubricants, coolant, full fuel tank, operator, standard bucket and standard equipment, without canopy
or cab.
** To top of operator seat.
2-4
Bucket Specifications CRAWLER-TYPE
DOZER SHOVELS
B
D C
A
H
G.L F
Model
D21S-7 D31S-20 D57S-1 D75S-5
Item
Bucket capacity m3(cu.yd) 0.4 (0.5) 0.8 (1.0) 1.8 (2.4) 2.2 (2.9)
Width of bucket mm (ft.in) 1670 (5'6") 1905 (6'3") 2290 (7'6") 2500 (8'2")
A Dumping clearance mm (ft.in) 2130 (7'0") 2540 (8'4") 2860 (9'5") 3200 (10'6")
B Dumping reach mm (ft.in) 735 (2'5") 810 (2'8") 1240 (4'1") 1305 (4'3")
C Hinge pin height mm (ft.in) 2590 (8'6") 3105 (10'2") 3660 (12') 4055 (13'4")
D Operating height mm (ft.in) 3405 (11'2") 4155 (13'8") 5115 (16'9") 5545 (18'2")
E Digging depth (at 10) mm (in) 190 (7.5) 260 (10.2) 345 (13.6) 380 (15.0)
F Tiltback at ground level degree 44 43 45 45
G Dumping at max. Lift degree 45 50 50 50
H Overall height mm (ft.in) 2300 (7'7") 2650 (8'8") 2907 (9'6") 3285 (10'9")
Breakout force kg (lb) 3570 (7,870) 6400 (14,100) 11650 (25,680) 17890 (39,440)
Static tipping load kg (lb) 2190 (4,830) 4260 (9,400) 10620 (23,410) 14160 (31,220)
Model
D31Q-20
Item
Bucket capacity m3 (cu.yd) 0.8 (1.0)
Width of bucket mm (ft.in) 2300 (7'7")
A Dumping clearance mm (ft.in) 2640 (8'8")
B Dumping reach mm (ft.in) 750 (2'6")
C Hinge pin height mm (ft.in) 3175 (10'5")
D Operating height mm (ft.in) 4015 (13'2")
E Digging depth (at 10) mm (in) 185 (7.3)
F Tiltback at ground level degree 43
G Dumping at max. Lift degree 50
H Overall height mm (ft.in) 2695 (8'10")
Breakout force kg (lb) 6800 (15,000)
Static tipping load kg (lb) 4430 (9,770)
2-5
SAE Loader CRAWLER-TYPE
Rating DOZER SHOVELS
1. DATA CHARACTERISTIC TO DOZER 5) LIFTING CAPACITY: 10,000 kg (22,050 lb)
SHOVELS (USING DATA FOR D75S-5 FOR With the rear of machine tied down, the vertical
REFERENCE) upward force to raise the lift arm by the lift
cylinder is the lifting capacity. Accordingly, this
1) BUCKET CAPACITY: 2.2 m3 (2.9 yd3) force is determined by the hydraulic lifting
Refers to heaped capacity. Conforms to SAE capacity (according to the SAE J732C 4.6)
J7426 (Front End Loader Bucket Rating) or JIS
D0005-1963.
Breakout Force
Bucket edge Fixed
2) MAXIMUM LOADING CAPACITY:
4,400 kg (9,700 lb) 4"(101.6mm) Lifting Capacity
2-6
Loader and Dump Truck CRAWLER-TYPE
Combination DOZER SHOVELS
SELECTION GUIDE FOR OPTIMUM DOZER SHOVEL FOR DUMP TRUCK
3500
18~32t
(D75S......3200x1305)2.2m D75S
3000
13.6~18t
(D57S......2860x1240)1.8m D57S
13.6~18t
(D31S......2540x810)0.8m
D31S
2500
4~6t
(D21S......2130x735)0.4m
2000
FVBH0057
Since the center of gravity of the dozer shovel will be different with optional arm, use a counterweight at the
rear of machine.
Combinations of KOMATSU dozer shovels and dump trucks in terms of dumping clearance and reach
Dozer shovel Bucket Capacity m3
Dump truck Paylod (ton) *Loading Cycle
Model (cu.,yd)
D21S-7 0.4 (0.5) 4-6 6-9
D31S-20 0.8 (1.05) 6-11 4-7
D57S-1 1.8 (2.35) 13.6-18 4-5
D75S-5 2.2 (2.88) 13.6-18 3-4
*: Loading cycle is estimated for soil of a specific weight of 2000 kg/m3
2-7
Front Attachments CRAWLER-TYPE
DOZER SHOVELS
ROCK BUCKET
Used for digging and loading rocks. Strengthened
with reinforced plates.
Model D75S-5
D57S-1
Item *Standard
Bucket capacity m3 (yd3) 1.6 (2.1) 2.2 (2.9)
Weight kg (lb) 1000 (2,200) 1600 (3,530)
Bucket width mm (ft.in) 2290 (7'6") 2500 (8'2")
Bucket height mm (ft.in) 1310 (4'4") 1510 (4'11")
Dumping clearance mm (ft.in) 2860 (9'5") 3200 10'6")
Dumping reach mm (ft.in) 1240 (4'1") 1305 (4'3")
Digging depth (10) mm (in) 345 (13.6) 380 (15.0)
No. of teeth 7 9
LARGE BUCKET
Used for loading and carrying big loads of material of
light specific gravity, such as sand and coke.
2-8
Front Attachments CRAWLER-TYPE
DOZER SHOVELS
MULTI-PURPOSE BUCKET
Consists of bucket and blade section which can be
opened and closed. This 4-in-1 bucket can function
as a bucket, blade, scraper, or clamshell.
G
F
C E
B A
FVBH0196
2-9
Front Attachments CRAWLER-TYPE
DOZER SHOVELS
SIDE-DUMP BUCKET
Can dump forward or to the side with turning the
tractor. Shortens cycle time for higher productivity.
2-10
Front Attachments CRAWLER-TYPE
DOZER SHOVELS
THREE-WAY BUCKET
Can dump forward or to the both left or right side without turning the tractor. Shortens cycle time for higher
productivity.
2-11
Production CRAWLER-TYPE
DOZER SHOVELS
STANDARD PRODUCTION (m3/hr) White area indicates average production
ESTIMATED CYCLES
BUCKET SIZE**(m3)
CYCLE TIME PER
SEC. MIN. 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.5 5.0 HOURS
24 0.40 120 180 240 300 360 420 480 540 600 675 750 150
27 0.45 107 160 213 267 320 373 427 480 533 600 667 133
30 0.50 96 144 192 240 288 336 384 432 480 540 600 120
33 0.55 87 131 175 218 262 305 349 393 436 491 545 109
36 0.60 80 120 160 200 240 280 320 360 400 450 500 100
39 0.65 74 111 148 185 222 258 295 332 369 415 462 92
42 0.70 69 103 137 171 206 240 274 309 343 386 429 86
45 0.75 64 96 128 160 192 224 256 288 320 360 400 80
48 0.80 60 90 120 150 180 210 240 270 300 338 375 75
ESTIMATED CYCLES
BUCKET SIZE**(cu.yd)
CYCLE TIME PER
SEC. MIN. 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 HOURS
24 0.40 150 225 300 375 450 525 600 675 750 825 900 150
27 0.45 133 200 267 333 400 467 533 600 667 733 800 133
30 0.50 120 180 240 300 360 420 480 540 600 660 720 120
33 0.55 109 164 218 273 327 382 436 491 545 600 655 109
36 0.60 100 150 200 250 300 350 400 450 500 550 600 100
39 0.65 92 138 185 231 277 323 369 415 462 508 554 92
42 0.70 86 129 171 214 257 300 343 386 429 471 514 86
45 0.75 80 120 160 200 240 280 320 360 400 440 480 80
48 0.80 75 113 150 188 225 263 300 338 375 413 450 75
** Bucket size: Heaped bucket capacity
2-12
CONTENTS
INDEX
SECTION 3
EXCAVATORS (BACKHOE) Sec 3A
MINIMAL SWING RADIUS Sec 3B
EXCAVATORS (UU)
LIFTING CAPACITY Sec 3C
BACKHOE ATTACHMENTS Sec 3D
LOADING SHOVELS Sec 3E
WHEEL-TYPE EXCAVATORS Sec 3F
SECTION 3A
EXCAVATORS (BACKHOE)
CONTENTS
Features .................................................................... 3A-2
Series selection ...................................................... 3A-12
Specifications ......................................................... 3A-14
Dimensions ............................................................. 3A-29
Working ranges and Digging forces .................... 3A-39
Component dimensions and weights .................. 3A-47
Shoe selection ........................................................ 3A-61
Shoe application .................................................... 3A-62
Ground pressure .................................................... 3A-65
Bucket capacity definition .................................... 3A-73
Bucket selection .................................................... 3A-74
Bucket and arm combinations .............................. 3A-76
Teeth features and Teeth selection ...................... 3A-86
Teeth selection ....................................................... 3A-87
Model selection ...................................................... 3A-92
Production ............................................................ 3A-101
3A-1
Features EXCAVATORS
(BACKHOE)
FVPM2753
3A-2
Features EXCAVATORS
(BACKHOE)
! Easy maintenance
Hydraulic oil and filter/engine oil and
filter replacement interval extended
Oil and filter change interval
Model
450 (17.7")
Dash-7 Avance series
Item
Engine oil h 500 250
Engine oil filter h 500 250
Hydraulic oil h 5000 5000
200 (7.9")
Hydraulic oil filter h 1000 500
3A-3
Features EXCAVATORS
(BACKHOE)
Internet
Personal
computer terminal
WebCARE Server (for downloading
data)
Komatsu
distributors
Recommendation
An appropriate recommendation can be made by viewing these data over the Internet.
Proper driving methods
Formulation of maintenance plans in advance that suit the customer's production schedule.
Customer's Benefit
Sudden break down can be prevented through utilization of data trend (change over time).
Ascertaining the facts and searching for the cause of the breakdown are simplified, thus enabling
problems to be resolved quickly.
Down time can be shortened by the systematic use of Reman components.
Machine life can be extended significantly by proper operation and proper maintenance.
3A-4
Features EXCAVATORS
(BACKHOE)
AVANCE Series
! High productivity and versatility
HydrauMind (PC60-PC450)
With HydrauMind system;
Work equipment speed is determined only by
lever stroke Good fine control operation.
Compound operation not affected by load
Good compound operation.
1) Working through soft rock or pulling up
boulders is easy.
2) Switching attachments is easy.
3) Fully loading bucket is easy.
4) Fine control lifting is easy.
5) Digging along ditch walls is easy.
6) Chassis shaking is reduced even during
simultaneous operations.
Power maximizing function
(Except PC60, EXCEL models)
Temporarily increases implement force for added power in tough situations.
Effective in operations such as digging up boulders and/or lifting operation.
Swift slow-down button
(Except PC60, EXCEL models)
The speed continues to go down while the switch is being pressed.
Example of effective jobs
1) Shaping load after completion of dump truck loading.
2) Difficult work with power, such as when digging up rocks.
3) Reverse scraping work.
Active Power Max.
(PC100-PC270 but except EXCEL models)
The exclusive Active Power Max. mode increases
the engine speed and the hydraulic relief
pressure, making possible more powerful, speedy
operation than with the ordinary Active mode.
Active mode
(PC100-PC450 but except EXCEL models)
Operating speed is boosted for light loads in all kinds of operations to greatly shorten cycle time.
Breaker mode (Except PC60, EXCEL models)
Engine speed, oil flow and pressure are preset at a level that provides proper fuel consumption at all
times.
Two-mode setting for boom
Relief pressure setting at the boom cylinder head can be switched "SMOOTH" or to high "POWER" mode
according to type of operations.
(PC300-PC1800 but except EXCEL models)
Shockless boom control
(PC750-PC1800)
When boom operation is stopped, less shock is
transmitted to the machines.
3A-5
Features EXCAVATORS
(BACKHOE)
Heavy lift mode
(PC750-PC1800)
Lifting capacity is increased by approximately
10%.
(1) FVBH0039
PC100-PC1250
Multi-layer viscous damping mount
(PC200-PC800)
Operator fatigue has been reduced.
Filter glass
(1/4 of whole periphery)
Hybrid hydraulic oil filter Retaining materials
(PC100-PC450)
Hydraulic oil filter element life is lengthened.
Paper filter of
density grandient type
FVBH0024
3A-6
Features EXCAVATORS
(BACKHOE)
3A-7
Features EXCAVATORS
(BACKHOE)
MIGHTY Series
! Komatsu MIGHTY series feature high
durability for demolition, quarry and
mining
For demolition, quarry and mining give heavy
loads to the machine body, reinforcement has
been added to the work equipment arm, to the
link and hydraulic cylinder and to the outer
components to achieve sufficient durability to
withstand continuous hard work.
Work equipment
1. Strengthened arm
Increased thickness of plates on (PC210/
230)
Reinforced on four surfaces (PC130)
Increased sectional dimensions (PC350/
450)
2. Piping guard (PC130)
3. Strengthened link (PC130)
Applicable for demolition attachment
4. Strengthened bucket
Horizontal pin type bucket teeth
Heavy duty bucket
5. Strengthened boom (PC210/230/350/450)
Operator cab
6. Operator cab half guard (PC130/210)
13. High mount cab (PC210/230)
Revolving frame
7. Deck guard
Strengthening beam added (PC130 and
over)
Revolving frame of PC220 used (PC210)
10. Strengtheed undercover of revolving frame
Others
8. Center circle undercover
11. Additional counterweight
Weight increased (Except PC450)
14. Double air cleaner elements (PC210/230)
15. Full roller guard (PC350/450)
3A-8
Features EXCAVATORS
(BACKHOE)
HD-Series
! Komatsu HD-series features heavy
duty undercarriage for tough logging
operations
The HD-series-6 enjoys greater mobility and
dependability in wooded areas, scrap yards, and
other locations where rough terrain demands high
performance.
Undercarriage designed for greater
durability
One Class Larger Undercarriage
(PC300HD)
All the components of the PC300HD-6
undercarriage are made for the one-class larger
PC400-6.
10 Track Rollers (Per Side) (PC400HD)
The number of track rollers has been increased
from 8 to 10, and the track roller mounting pitch
has been reduced compared to the PC400LC-6.
Full Length Track Roller Guard
The full-length track roller guard covers the entire
length of the track frame.
This prevents stones from getting caught in the
track rollers and causing derailment.
Recoil Spring Installed at a Higher Load
(PC400HD)
The pre-stressed load on the recoil springs is
16% greater than in the PC400LC-6, thus
increasing dependability on rough ground and
steep slopes, where tracks often slip, derail, and
suffer extensive damage.
Long track and wide track gauge offer
excellent stability
The HD-series track frame accommodates a long
track and a wide track gauge so as to offer
excellent stability.
The PC300HD/400HD has more lifting capacity
than the PC300LC/400LC.
Variable track gauge facilitates transport
The HD-series has a variable track gauge, so the
overall width in transit is narrower.
This means that the excavator can pass through
small tunnels and over narrow bridges in
mountain areas. (PC400HD)
3A-9
Features EXCAVATORS
(BACKHOE)
3A-10
Features EXCAVATORS
(BACKHOE)
Heavy-duty shovel undercarriage design
Komatsu Mining Germany track system with oscillating shoes for optimum response to rugged mining
ground conditions
Lifetime lubricated rollers
Automatic track tensioning system
Track shoes in high quality casting steel and engineered by finite element method
Precision hard facing of contact surfaces for long term performance
Different width of shoes available for best performance in softer mining ground conditions
Attachments
Front shovel and backhoe attachment available for all mining applications
Closed box design combining steel plates and castings, engineered by finite element method for full
lifetime
Wide selection of buckets and customized options
Bucket wear package ranges to meet all mining conditions
Attachment pin sealing arrangement for reduced bearing wear-parts costs
Service
Hydraulically assisted ladder for ease and convenience access
Upper structure walkway allows safe access to all service points
Walk in machinery house provides all weather protection for service attention
Automatic central lubrication system for attachment and main swing bearing
Swing down service arm for fast, ground level refilling and evacuation and the minimizing of leakages
during service
Complete machine delivered in pre-tested modules for fast erection on job side
3A-11
Features EXCAVATORS
(BACKHOE)
Series Selection
The AVANCE line-up is expanded, with different excavator series for different jobs.
You can choose the right machines for your work, factory-equipped for your operation.
"Dash-7" Series, AVANCE "Standard" Series
Flexible, efficient excavators for a wider range of work
AVANCE "Mighty" Series
Extra-strong excavators for mining, quarrying and demolition
AVANCE "HD" Series
"Heavy-duty" excavators with reinforced undercarriages for logging and scrap handling
AVANCE "EXCEL and Custom" Series
Simple, basic excavators for easy operation and maintenance
AVANCE "US" Series
Excavators with short tail swing profile for work on road ways,urban areas and logging road way
3A-12
MEMO
Specifications EXCAVATORS
(BACKHOE)
Model
PC01-1 PC02-1 PC09-1 PC12R-8
Item
Source Japan Japan Japan Italy
OPERATING WEIGHT* kg (lb) 380 (840) 530 (1,170) 890 (1,960) 1475 (3,250)
FLYWHEEL (SAE) HP (kW)/RPM 3.5 (2.6)/3000 4.4 (3.3)/2500 8.4 (6.2)/2800 14.3 (10.6)/2450
HORSEPOWER: (DIN) PS (kW)/RPM 3.5 (2.6)/3000 4.5 (3.3)/2500 8.5 (6.2)/2800 14.5 (10.6)/2450
BUCKET CAPACITY RANGE 0.008 0.012 0.017 ~ 0.025 0.03 ~ 0.06
(SAE) m3 (cu.yd) (0.01) (0.016) (0.022) (0.033) (0.04) (0.078)
PERFORMANCE:
Swing speed RPM 7.0 7.5 8.3 9
Max travel speed km/h (MPH) 1.4 (0.9) 1.6 (1.0) Hi 3.0 (1.9) 2 (1.2)
Lo 1.5 (0.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: HONDA KOMATSU KOMATSU KOMATSU
Model GX160KI 1D75 2D68E 3D68E
No. of cylinders- mm 1-68 45 1-75 62 2-68 x 72 3-68 72
bore stroke (in) (2.67 1.77) (2.95 2.44) (2.68 2.83) (2.68 2.83)
Piston displacement ltr. (cu.in) 0.163 (9.9) 0.273 (16.7) 0.522 (31.9) 0.784 (47.8)
HYDRAULIC SYSTEM:
Hydraulic pump Gear pumps Gear pumps Gear pumps Gear pumps
Max. oil flow ltr. (U.S.Gal)/min. 10 (2.6) 12.4 (3.3) 22 (5.8)
Max. oil pressure kg/cm2 (PSI) 150 (2130) 150 (2130) 160 (2275)
Track shoe width/ mm (in)/ 130 (5)/ 150 (6)/ 180 (7)/ 230 (9)/
ground pressure kg/cm2 (PSI) 0.17 (2.4) 0.2 (2.8) 0.28 (4.0)
CAPACITY (Refilled):
Fuel tank 4.5 (1.2) 3.5 (0.9) 11 (2.9) 20 (5.3)
Hydraulic oil tank ltr. (U.S.Gal) 4.8 (1.3) 7.5 (2.0) 12 (3.2) 23 (6.1)
MACHINE SPEC:
Boom mm (ft.in) 920 (3') 1130 (3'8")
Arm mm (ft.in) 480 (1'7") 575 (1'11") 684 (2'3") 880 (2'11")
Bucket (SAE) m3 (cu.yd) 0.008 (0.01) 0.012 (0.016) 0.022 (0.029) 0.04 (0.05)
Upper attachment Canopy
Model
PC15MRX-1 PC15R-8 PC20MRX-1 PC20R-8
Item
Source Japan Italy Japan Italy
OPERATING WEIGHT* kg (lb) 1805 (3,980) 1575 (3,470) 2190 (4,830) 2535 (5,580)
FLYWHEEL (SAE) HP (kW)/RPM 15.0 (11.2)/2600 15.3 (11.4)/2600 18.7 (14)/2600 23.3 (17.4)/2600
HORSEPOWER: (DIN) PS (kW)/RPM 15.2 (11.2)/2600 15.5 (11.4)/2600 19.0 (14.1)/2600 23.6 (17.4)/2600
BUCKET CAPACITY RANGE 0.022 ~ 0.044 0.03 ~ 0.06 0.033 ~ 0.08 0.035 ~ 0.085
(SAE) m3 (cu.yd) (0.029) (0.058) (0.04) (0.078) (0.043) (0.10) (0.046) (0.11)
PERFORMANCE:
Swing speed RPM 8.3 10.4 9.3 9
Max travel speed km/h (MPH) Hi 4.3 (2.7) Hi 4.2 (2.6) Hi 4.8 (3.0) Hi 4.3 (2.67)
Lo 2.3 (1.4) Lo 2.2 (1.4) Lo 2.3 (1.4) Lo 2.2 (1.36)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D68E 3D68E 3D74E 3D78AE
No. of cylinders- mm 3-68 72 3-68 72 3-74 78 3-78 84
bore stroke (in) (2.68 2.83) (2.68 2.83) (2.91 3.07) (3.07 3.31)
Piston displacement ltr. (cu.in) 0.784 (47.8) 0.784 (47.8) 1.006(61.4) 1.204 (73.4)
HYDRAULIC SYSTEM: 1 Variable 1 Variable 1 Variable
Hydraulic pump Piston+Gear pump Gear pumps Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 47.5 (12.6) 59.8 (15.8)
Max. oil pressure kg/cm2 (PSI) 220 (3130) 210 (2990)
Track shoe width/ mm (in)/ 230 (9)/ 230 (9)/ 250 (10)/ 250 (10)/
ground pressure kg/cm2 (PSI) 0.29 (4.1) 0.27 (3.8)
CAPACITY (Refilled):
Fuel tank 19 (5.0) 20 (5.3) 25 (6.6) 35 (9.2)
Hydraulic oil tank ltr. (U.S. Gal) 14 (3.7) 23 (6.1) 21 (5.5) 29 (7.7)
MACHINE SPEC:
Boom mm (ft.in) 1760 (5'9") 1809 (5'11'')
Arm mm (ft.in) 965 (3'2") 965 (3'2") 930 (3'1'') 1070 (3'6")
Bucket (SAE) m3 (cu.yd) 0.044 (0.058) 0.04 (0.05) 0.066 (0.86) 0.07 (0.09)
Upper attachment Canopy Canopy Canopy Cab
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
3A-14
Specifications EXCAVATORS
(BACKHOE)
Model
PC27MRX** PC27R-8 PC30MRX-1 PC35R-8
Item
Source Japan Italy Japan Italy
OPERATING WEIGHT* kg (lb) 2995 (6,605) 3065 (6,750) 3200 (7,060) 3670 (8,090)
FLYWHEEL (SAE) HP (kW)/RPM 25.6 (19.1)/2600 26 (19.4)/2600 27.6 (20.6)/2500 28.2 (21)/2500
HORSEPOWER: (DIN) PS (kW)/RPM 26.4 (19.4)/2600 28 (20.6)/2500 28.6 (21)/2500
BUCKET CAPACITY RANGE 0.042 ~ 0.08 0.045 ~ 0.105 0.035 ~ 0.11 0.5 ~ 0.13
(SAE) m3 (cu.yd) (0.055) (0.105) (0.06) (0.14) (0.045) (0.14) (0.07) (0.17)
PERFORMANCE:
Swing speed RPM 9.2 9 9.3 9
Max travel speed km/h (MPH) Hi 4.8 (3.0) Hi 4.4 (2.7) Hi 4.6 (2.9) Hi 4.6 (2.9)
Lo 2.4 (1.5) Lo 2.2 (1.36) Lo 2.8 (1.7) Lo 2.8 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D82AE 3D82AE 3D84E 3D84E
No. of cylinders- mm 3-82 x 84 3-82 84 3-84 90 3-84 90
bore stroke (in) (3.23 x 3.31) (3.23 3.31) (3.31 3.54) (3.31 3.54)
Piston displacement ltr. (cu.in) 1.33 (81.2) 1.33 (81.2) 1.496 (91.3) 1.496 (91.3)
HYDRAULIC SYSTEM: 1 x Variable 1 Variable 1 Variable 1 Variable
Hydraulic pump Piston+Geer pump Piston+Gear pump Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 71.3 (18.8) 91.6 (24.2)
Max. oil pressure kg/cm2 (PSI) 220 (3130) 265 (3770)
Track shoe width/ mm (in)/ 300 (12)/ 300 (12)/ 300 (12)/ 300 (12)/
ground pressure kg/cm2 (PSI) 0.34 (4.8) 0.30 (4.3) 0.34 (4.9)
CAPACITY (Refilled):
Fuel tank 37 (9.8) 35 (9.2) 42 (11.1) 51.5 (13.6)
Hydraulic oil tank ltr. (U.S. Gal) 28.5 (7.5) 29 (7.7) 28.5 (7.5) 33 (8.7)
MACHINE SPEC:
Boom mm (ft.in) 2120 (6'11") 2220 (7'3")
Arm mm (ft.in) 1110 (3'8") 1200 (3'11") 1260 (4'1") 1350 (4'5")
Bucket (SAE) m3 (cu.yd) 0.08 (0.105) 0.075 (0.10) 0.09 (0.12) 0.095 (0.12)
Upper attachment TOPS Canopy Cab Canopy Cab
Model
PC35MRX** PC40MRX-1 PC45R-8 PC45MRX-1
Item
Source Japan Japan Italy Japan
OPERATING WEIGHT* kg (lb) 3765 (8,300) 4580 (10,100) 4860 (10,710) 4820 (10,630)
FLYWHEEL (SAE) HP (kW)/RPM 27.6 (20.6)/2500 38.0 (28.3)/2500 38.8 (28.9)/2500 38.0 (28.3)/2500
HORSEPOWER: (DIN) PS (kW)/RPM 28.0 (20.6)/2500 38.5 (28.3)/2500 39.4 (28.9)/2500 38.5 (28.3)/2500
BUCKET CAPACITY RANGE 0.066 ~ 0.14 0.055 ~ 0.16 0.07 ~ 0.175 0.055 ~ 0.18
(SAE) m3 (cu.yd) (0.09) (0.18) (0.07) (0.21) (0.09) (0.22) (0.07) (0.024)
PERFORMANCE:
Swing speed RPM 9 9.0 9 9
Max travel speed km/h (MPH) Hi 4.6 (2.9) Hi 4.3 (2.7) Hi 4.6 (2.9) Hi 4.3 (2.7)
Lo 2.8 (1.7) Lo 2.7 (1.7) Lo 2.8 (1.7) Lo 2.7 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D84E 4D84E 4D84E 4D84E
No. of cylinders- mm 3-84 x 90 4-84 90 4-84 90 4-84 90
bore stroke (in) (3.31 x 3.54) (3.31 3.54) (3.31 3.54) (3.31 3.54)
Piston displacement ltr. (cu.in) 1.496 (91.3) 1.996 (122) 1.995 (122) 1.996 (122)
HYDRAULIC SYSTEM: 2 x Variable 1 Variable 1 Variable 1 Variable
Hydraulic pump Piston+Geer pump Piston+Gear pump Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 82.6 130 (34.3) 129.5 (34) 130 (34.3)
2
Max. oil pressure kg/cm (PSI) 265 (3770) 265 (3770) 255 (3630) 265 (3770)
Track shoe width/ mm (in)/ 300 (12)/ 400 (16)/ 400 (16)/ 400 (16)/
ground pressure kg/cm2 (PSI) 0.39 (5.5) 0.28 (4.0) 0.30 (4.3)
CAPACITY (Refilled):
Fuel tank 42 (11.1) 60 (15.9) 51.5 (13.6) 60 (15.9)
Hydraulic oil tank ltr. (U.S. Gal) 28.5 (7.5) 33 (8.7) 33 (8.7) 33 (8.7)
MACHINE SPEC:
Boom mm (ft.in) 2550 (8'4") 2695 (8'10") 2785 (9'2")
Arm mm (ft.in) 1350 (4'5") 1380 (4'6") 1480 (4'10") 1480 (4'10")
Bucket (SAE) m3 (cu.yd) 0.11 ( ) 0.14 (0.18) 0.15 (0.20) 0.16 (0.21)
Upper attachment TOPS Canopy Canopy Cab Canopy
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** For USA
3A-15
Specifications EXCAVATORS
(BACKHOE)
Model
PC60-7 PC75R-2 PC78US-6 PC78MR-6
Item
Source Japan Italy Japan Japan
OPERATING WEIGHT* kg (lb) 6250 (13,780) 7400 (16,310) 6850 (15,100) 8270 (18,230)
FLYWHEEL (SAE) HP (kW)/RPM 54 (40)/1750 68 (50)/2300 54 (40.5)/1850 54 (40.5)/1850
HORSEPOWER: (DIN) PS (kW)/RPM 55 (40)/1750 69.3 (51)/2300 55 (40.5)/1850 55 (40.5)/1850
BUCKET CAPACITY RANGE 0.09 ~ 0.36 0.086 ~ 0.265 0.08 ~ 0.32 0.09 ~ 0.34
(SAE) m3 (cu.yd) (0.11) (0.47) (0.11) (0.35) (0.09) (0.34) (0.12) (0.45)
PERFORMANCE:
Swing speed RPM 12.0 10.2 10.0 10.0
Max travel speed km/h (MPH) Hi 4.5 (2.8) Hi 5.1 (3.2) Hi 4.5 (2.8) Hi 4.2 (2.6)
Lo 2.8 (1.7) Lo 3.1 (1.9) Lo 3.0 (1.9) Lo 2.8 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D95LE 4D98E 4D95LE S4D95LE
No. of cylinders- mm 4-95 115 4-98 110 4-95 115 4-95 x 115
bore stroke (in) (3.74 4.53) (3.86 4.33) (3.74 4.53) (3.74 x 4.53)
Piston displacement ltr. (cu.in) 3.26 (199) 3.318 (202) 3.26 (199) 3.26 (199)
HYDRAULIC SYSTEM: 1 Variable 1 Variable 2 Variable 1 x Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 155 (41) 227 (60) 160 (42.2) 160 (42.2)
Max. oil pressure kg/cm2 (PSI) 250 (3560) 270 (3840) 270 (3840) 270 (2840)
Track shoe width/ mm (in)/ 450 (18)/ 450 (18)/ 450 (18)/ 450 (18)/
ground pressure kg/cm2 (PSI) 0.30 (4.3) 0.34 (4.8) 0.33 (4.7) 0.38 (5.4)
CAPACITY (Refilled):
Fuel tank 130 (34.3) 100 (26.4) 125 (33) 125 (33)
Hydraulic oil tank ltr. (U.S. Gal) 57 (15.1) 70 (18.5) 64 (16.9) 64 (16.9)
MACHINE SPEC:
Boom mm (ft.in) 3710 (12'2") 3000 (9'10") 3710 (12'2") 3400 (11'2")
Arm mm (ft.in) 1650 (5'5") 1700 (5'7") 1650 (5'5") 1650 (5'5")
Bucket (SAE) m3 (cu.yd) 0.28 (0.37) 0.232 (0.30) 0.28 (0.37) 0.28 (0.37)
3A-16
Specifications EXCAVATORS
(BACKHOE)
Model
PC100F-6 PC100L-6 PC110R-1 PC120-6
Item
Source Indonesia Japan Italy Japan
OPERATING WEIGHT* kg (lb) 14270 (31,460) 13800 (30,420) 10560 (23,280) 12030 (26,520)
FLYWHEEL (SAE) HP (kW)/RPM 95 (70.9)/2000 81 (60)/2100 95 (70.9)/2000 86 (64)/2200
HORSEPOWER: (DIN) PS (kW)/RPM 97.5 (72)/2000 82 (60)/2100 97.5 (72)/2000 87 (64)/2200
BUCKET CAPACITY RANGE 0.5 ~ 0.55 0.18 ~ 0.55 0.093 ~ 0.40 0.18 ~ 0.60
(SAE) m3 (cu.yd) (0.65) (0.72) (0.24) (0.72) (0.12) (0.52) (0.24) (0.78)
PERFORMANCE:
Swing speed RPM 12.0 11.0 9.0 11.0
Max travel speed km/h (MPH) Hi 4.0 (2.5) Hi 4.2 (2.6) Hi 4.1 (2.5) Hi 5.5 (3.4)
Mi 2.8 (1.7) Mi 3.6 (2.2)
Lo 2.3 (1.4) Lo 2.2 (1.4) Lo 2.8 (1.7) Lo 2.7 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model S4D102E S4D102E S4D106E S4D102E
No. of cylinders- mm 4-102 x 120 4-102 120 4-106 125 4-102 120
bore stroke (in) (4.02 x 4.72) (4.05 4.72) (4.17 4.92) (4.05 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 4.41 (269) 3.92 (239)
HYDRAULIC SYSTEM: 1 x Variable 1 Variable 1 Variable 1 Variable
Hydraulic pump Piston Piston Piston+Gear pump Piston
Max. oil flow ltr. (U.S. Gal)/min. 216 (57) 216 (57) 244 (64) 226 (60)
Max. oil pressure kg/cm2 (PSI) 325 (4620) 325 (4620) 300 (4270) 355 (5050)
Track shoe width/ mm (in)/ 900 (36)/ 800 (31)/ 500 (20)/ 500 (20)/
ground pressure kg/cm2 (PSI) 0.29 (4.12) 0.27 (3.8) 0.40 (5.7)
CAPACITY (Refilled):
Fuel tank 240 (63.4) 230 (60.8) 230 (60.8)
Hydraulic oil tank ltr. (U.S. Gal) 100 (26.4) 100 (26.4) 100 (26.4)
MACHINE SPEC:
Boom mm (ft.in) 4260 (14') 4260 (14') 4600 (15'1")
Arm mm (ft.in) 2360 (7'9") 2360 (7'9") 2000 (6'7") 2500 (8'2")
Bucket (SAE) m3 (cu.yd) 0.55 (0.72) 0.44 (0.58) 0.314 (0.41) 0.50 (0.65)
Model PC120-6
PC120-6*** PC120LC-6*** PC128US-2
Item EXCEL
Source Japan Japan Japan Japan
OPERATING WEIGHT* kg (lb) 12220 (26,940) 12030 (26,520) 12600 (27,780) 13000 (28,660)
FLYWHEEL (SAE) HP (kW)/RPM 86 (64)/2200 84 (63)/2000 86 (64)/2200 86 (64)/2200
HORSEPOWER: (DIN) PS (kW)/RPM 87 (64)/2200 85 (63)/2000 87 (64)/2200 87 (65)/2200
BUCKET CAPACITY RANGE 0.35 ~ 0.70 0.18 ~ 0.60 0.18 ~ 0.60 0.18 ~ 0.55
(SAE) m3 (cu.yd) (0.46) (0.92) (0.24) (0.78) (0.24) (0.78) (0.24) (0.72)
PERFORMANCE:
Swing speed RPM 11.0 11.0 11.0 11.0
Max travel speed km/h (MPH) Hi 5.0 (3.1) 3.4 (2.1) Hi 5.0 (3.1) Hi 5.1 (3.2)
Mi 3.3 (2.1) Mi 3.3 (2.1)
Lo 2.5 (1.6) Lo 2.5 (1.6) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model S4D102E S4D102E S4D102E S4D102E
No. of cylinders- mm 4-102 120 4-102 120 4-102 120 4-102 120
bore stroke (in) (4.05 4.72) (4.02 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 3.92 (239) 3.92 (239)
HYDRAULIC SYSTEM: 1 Variable 1 Variable 1 Variable 1 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 226 (60) 206 (54) 226 (60) 226 (60)
Max. oil pressure kg/cm2 (PSI) 355 (5050) 325 (4620) 355 (5050) 355 (5050)**
Track shoe width/ mm (in)/ 600 (24)/ 500 (20)/ 600 (24)/ 500 (20)/
ground pressure kg/cm2 (PSI) 0.34 (4.8) 0.40 (5.7) 0.31 (4.4) 0.44 (6.3)
CAPACITY (Refilled):
Fuel tank 240 (63.4) 230 (60.8) 240 (63.4) 200 (52.8)
Hydraulic oil tank ltr. (U.S. Gal) 100 (26.4) 100 (26.4) 100 (26.4) 69 (18.2)
MACHINE SPEC:
Boom mm (ft.in) 4600 (15'1") 4600 (15'1") 4600 (15'1") 4600 (15'1")
Arm mm (ft.in) 2500 (8'2") 2500 (8'2") 2500 (8'2") 2500 (8'2")
Bucket (SAE) m3 (cu.yd) 0.50 (0.65) 0.50 (0.65) 0.50 (0.65) 0.45 (0.59)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** For USA
3A-17
Specifications EXCAVATORS
(BACKHOE)
Model PC130-6
PC130-6 PC158USLC-2 PC160LC-7
Item MIGHTY
Source Japan UK Japan Japan
OPERATING WEIGHT* kg (lb) 12350 (27,230) 13050 (28,770) 16500 (36,380) 16400 (36,160)
FLYWHEEL (SAE) HP (kW)/RPM 86 (64)/2200 86 (64)/2200 98.6 (74)/2300 111 (82.4)/2200
HORSEPOWER: (DIN) PS (kW)/RPM 87 (64)/2200 87 (64)/2200 100 (74)/2300 112 (82.4)/2200
BUCKET CAPACITY RANGE 0.50 0.24 ~ 0.68 0.50 ~ 0.60 0.60 ~ 0.70
(SAE) m3 (cu.yd) (0.65) (0.31) (0.89) (0.65) (0.78) (0.78) (0.92)
PERFORMANCE:
Swing speed RPM 11.0 11.0 10.0 12.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 4.2 (2.6) Hi 5.5 (3.4)
Mi 3.6 (2.2)
Lo 2.7 (1.7) Lo 2.7 (1.7) Lo 2.7 (1.7) Lo 3.4 (2.1)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model S4D102E S4D102E S6D102E SAA4D102E
No. of cylinders- mm 4-102 120 4-102 120 4-102 120 4-102 x 120
bore stroke (in) (4.02 4.72) (4.02 4.72) (4.02 4.72) (4.02 x 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 3.92 (239) 3.92 (239)
HYDRAULIC SYSTEM: 1 Variable 1 Variable 1 Variable 2 x Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 226 (60) 226 (60) 237 (63) 312 (82.4)
Max. oil pressure kg/cm2 (PSI) 355 (5050)** 325 (4620) 380 (5400) 380 (5400)
Track shoe width/ mm (in)/ 500 (20)/ 700 (28)/ 600 (24)/ 500 (20)/
ground pressure kg/cm2 (PSI) 0.41 (5.8) 0.31 (4.4) 0.43 (6.1) 0.47 (6.7)
CAPACITY (Refilled):
Fuel tank 230 (60.8) 230 (60.8) 195 (51.5) 280 (74)
Hydraulic oil tank ltr. (U.S. Gal) 100 (26.4) 100 (26.4) 69 (18.2) 121 (32.0)
MACHINE SPEC:
Boom mm (ft.in) 4600 (15'1") 4600 (15'1") 4600 (15'1") 5150 (16'11")
Arm mm (ft.in) 2500 (8'2") 2900 (9'6") 2500 (8'2") 2610 (8'7")
Bucket (SAE) m3 (cu.yd) 0.50 (0.65) 0.68 (0.89) 0.55 (0.72) 0.65 (0.85)
Model
PC160LC-7*5 PC160LC-7 PC180LC-7 PC200-7***
Item
Source Japan, UK UK UK Japan
OPERATING WEIGHT* kg (lb) 16620 (36,740) 16400 (36,160) 17500 (38,580) 19500 (42,990)
FLYWHEEL (SAE) HP (kW)/RPM 110 (82.4)/2200 110 (82.4)/2200 110 (82.4)/2200 143 (107)/1950
HORSEPOWER: (DIN) PS (kW)/RPM 112 (82.4)/2200 112 (82.4)/2200 112 (82.4)/2200 145 (107)/1950
BUCKET CAPACITY RANGE 0.45 ~ 0.95 0.27 ~ 0.95 0.40 ~ 1.14 0.50 ~ 1.17
(SAE) m3 (cu.yd) (0.59) (1.24) (0.35) (1.24) (0.52) (1.49) (0.65) (1.53)
PERFORMANCE:
Swing speed RPM 12.0 12.0 12.0 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
3A-18
Specifications EXCAVATORS
(BACKHOE)
Model
PC200-7*4 PC200-7 PC200-7 PC200-7
Item
Source Japan USA China Indonesia
OPERATING WEIGHT* kg (lb) 19500 (42,990) 20010 (44,110) 19700 (43,430) 20785 (45,820)
FLYWHEEL (SAE) HP (kW)/RPM 143 (107)/1950 143 (107)/1950 143 (107)/1950 143 (107)/1950
HORSEPOWER: (DIN) PS (kW)/RPM 145 (107)/1950 145 (107)/1950 145 (107)/1950 145 (107)/1950
BUCKET CAPACITY RANGE 0.50 ~ 1.17 0.8 0.80 ~ 1.60 0.93
(SAE) m3 (cu.yd) (0.65) (1.53) (1.05) (1.05) (1.31) (1.21)
PERFORMANCE:
Swing speed RPM 12.4 12.4 12.4 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 120 6-102 x 120 6-102 x 120 6-102 x 120
bore stroke (in) (4.02 4.72) (4.02 x 4.72) (4.02 x 4.72) (4.02 x 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 Variable 2 Variable 2 x Variable 2 x Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 800 (32)/ 600 (24)/ 800 (32)/
ground pressure kg/cm2 (PSI) 0.46 (6.5) 0.35 (4.98) 0.46 (6.5) 0.36 (5.12)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 2925 (9'7") 2925 (9'7") 2925 (9'7") 2925 (9'7")
Bucket (SAE) m3 (cu.yd) 0.80 (1.05) 0.80 (1.05) 0.8 (1.05) 0.93 (1.22)
Model
PC200-7SEF PC200LC-7*** PC200LC-7*4 PC200LC-7
Item
Source Indonesia Japan Japan USA
OPERATING WEIGHT* kg (lb) 21200 (46,740) 20900 (46,080) 20900 (46,080) 20700 (45,640)
FLYWHEEL (SAE) HP (kW)/RPM 143 (107)/1950 143 (107)/1950 143 (107)/1950 143 (106.6)/1950
HORSEPOWER: (DIN) PS (kW)/RPM 145 (107)/1950 145 (107)/1950 145 (107)/1950 145 (106.6)/1950
BUCKET CAPACITY RANGE 1.3 0.50 ~ 1.17 0.50 ~ 1.17 0.48 ~ 1.53
(SAE) m3 (cu.yd) (1.7) (0.65) (1.53) (0.65) (1.53) (0.66) (2.0)
PERFORMANCE:
Swing speed RPM 12.4 12.4 12.4 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 x 120 6-102 120 6-102 120 6-102 120
bore stroke (in) (4.02 x 4.72) (4.02 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 800 (32)/ 700 (28)/ 700 (28)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.37 (5.26) 0.38 (5.4) 0.38 (5.4) 0.37 (5.26)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5200 (17'8") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 1900 (6'3") 2925 (9'7") 2925 (9'7") 2925 (9'7")
Bucket (SAE) m3 (cu.yd) 1.3 (1.7) 0.80 (1.05) 0.80 (1.05) 0.80 (1.05)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
3A-19
Specifications EXCAVATORS
(BACKHOE)
Model
PC200LC-7 PC210-7 PC210-7 PC210LC-7
Item
Source China UK China UK
OPERATING WEIGHT* kg (lb) 21100 (46,520) 20575 (45,360) 19800 (43,650) 21575 (47,560)
FLYWHEEL (SAE) HP (kW)/RPM 143 (107)/1950 143 (107)/1950 143 (107)/1950 143 (107)/1950
HORSEPOWER: (DIN) PS (kW)/RPM 145 (107)/1950 145 (107)/1950 145 (107)/1950 145 (107)/1950
BUCKET CAPACITY RANGE 0.80 ~ 1.00 0.48 ~ 1.68 0.80 ~ 1.00 0.48 ~ 1.68
(SAE) m3 (cu.yd) (1.05) (1.31) (0.63) (2.2) (1.05) (1.31) (0.63) (2.2)
PERFORMANCE:
Swing speed RPM 12.4 12.4 12.4 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.5 (2.8) Mi 4.1 (2.5) Mi 4.5 (2.8)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 x 120 6-102 120 6-102 x 120 6-102 120
bore stroke (in) (4.02 x 4.72) (4.02 4.72) (4.02 x 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 x Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.45 (6.4) 0.48 (6.8) 0.46 (6.5) 0.39 (5.5)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 2925 (9'7") 2900 (9'6") 2925 (9'7") 2900 (9'6")
Bucket (SAE) m3 (cu.yd) 0.80 (1.05) 0.96 (1.25) 0.90 (1.18) 0.96 (1.25)
Model
PC210NLC-7 PC210LC-7 PC220-7*** PC220-7* 4
Item
Source UK China Japan Japan
OPERATING WEIGHT* kg (lb) 21075 (46,460) 21200 (46,740) 22840 (50,350) 22840 (50,350)
FLYWHEEL (SAE) HP (kW)/RPM 143 (107)/1950 143 (107)/1950 168 (125)/2200 168 (125)/2200
HORSEPOWER: (DIN) PS (kW)/RPM 145 (107)/1950 145 (107)/1950 170 (125)/2200 170 (125)/2200
BUCKET CAPACITY RANGE 0.48 ~ 1.49 0.80 ~ 1.00 0.72 ~ 1.26 0.72 ~ 1.26
(SAE) m3 (cu.yd) (0.63) (1.9) (1.05) (1.31) (0.94) (1.65) (0.94) (1.65)
PERFORMANCE:
Swing speed RPM 12.4 12.4 11.7 11.7
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.5 (2.8) Mi 4.1 (2.5) Mi 4.2 (2.6)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.1 (1.9) Lo 3.1 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 120 6-102 x 120 6-102 120 6-102 120
bore stroke (in) (4.02 4.72) (4.02 x 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 Variable 2 x Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 439 (116) 439 (116)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 500 (20)/ 600 (24)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.53 (7.5) 0.45 (6.4) 0.51 (7.3) 0.51 (7.3)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5850 (19'2") 5850 (19'2")
Arm mm (ft.in) 2900 (9'6") 2925 (9'7") 3045 (10'0") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 0.96 (1.25) 0.90 (1.18) 1.0 (1.31) 1.0 (1.31)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
3A-20
Specifications EXCAVATORS
(BACKHOE)
Model
PC220-7 PC220LC-7*** PC220LC-7*4 PC220LC-7
Item
Source China Japan Japan USA
OPERATING WEIGHT* kg (lb) 22900 (50,490) 24270 (53,510) 24270 (53,510) 24510 (54,046)
FLYWHEEL (SAE) HP (kW)/RPM 168 (125)/2000 168 (125)/2200 168 (125)/2200 168 (125)/2000
HORSEPOWER: (DIN) PS (kW)/RPM 170 (125)/2000 170 (125)/2200 170 (125)/2200 170 (125)/2000
BUCKET CAPACITY RANGE 0.72 ~ 1.26 0.72 ~ 1.26 0.72 ~ 1.26 0.48 ~ 1.74
(SAE) m3 (cu.yd) (0.94) (1.65) (0.94) (1.65) (0.94) (1.65) (0.63) (2.20)
PERFORMANCE:
Swing speed RPM 11.7 11.7 11.7 11.7
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.2 (2.6) Mi 4.2 (2.6) Mi 4.2 (2.6)
Lo 3.1 (1.9) Lo 3.1 (1.9) Lo 3.1 (1.9) Lo 3.1 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 x 120 6-102 120 6-102 120 6-102 120
bore stroke (in) (4.02 x 4.72) (4.02 4.72) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 432 (114) 439 (116) 439 (116) 439 (116)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 700 (28)/ 700 (28)/ 800 (31.5)/
ground pressure kg/cm2 (PSI) 0.51 (7.3) 0.42 (6.0) 0.42 (6.0) 0.38 (5.4)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19'2") 5850 (19'2") 5850 (19'2") 5850 (19'2")
Arm mm (ft.in) 3045 (10'0") 3045 (10'0") 3045 (10'0") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 1.0 (1.31) 1.0 (1.31) 1.0 (1.31) 1.0 (1.31)
Model
PC220LC-7 PC228US-3 PC228USLC-3 PC230NHD-7* 5
Item
Source China Japan Japan UK
OPERATING WEIGHT* kg (lb) 24200 (53,350) 21680 (47,800) 22980 (50,660) 22600 (49,820)
FLYWHEEL (SAE) HP (kW)/RPM 168 (125)/2000 143 (107)/1950 143 (107)/1950 143 (107)/1950
HORSEPOWER: (DIN) PS (kW)/RPM 170 (125)/2000 145 (107)/1950 145 (107)/1950 145 (107)/1950
BUCKET CAPACITY RANGE 0.72 ~ 1.26 0.50 ~ 1.05 0.50 ~ 1.05 0.48 ~ 1.68
(SAE) m3 (cu.yd) (0.94) (1.65) (0.65) (1.37) (0.65) (1.37) (0.63) (2.20)
PERFORMANCE:
Swing speed RPM 11.7 11.0 11.0 11.9
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.4 (3.4)
Mi 4.2 (2.6) Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 3.6 (2.2)
Lo 3.1 (1.9) Lo 3.0 (1.9) Lo 3.4 (2.1) Lo 2.6 (1.6)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 x 120 6-102 120 6-102 120 6-102 x 120
bore stroke (in) (4.02 x 4.72) (4.02 4.72) (4.02 4.72) (4.02 x 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 Variable 2 x Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 432 (114) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 700 (28)/ 550 (22)/
ground pressure kg/cm2 (PSI) 0.50 (7.1) 0.51 (7.25) 0.42 (6.0) 0.55 (4.3)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 320 (84.5) 320 (84.5) 400 (105.7)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 126 (33.3) 126 (33.3) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19'2") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 3045 (10'0") 2925 (9'7") 2925 (9'7") 2900 (9'6")
Bucket (SAE) m3 (cu.yd) 1.0 (1.31) 0.8 (1.05) 0.8 (1.05) 0.96 (1.26)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
*5 With mono boom
3A-21
Specifications EXCAVATORS
(BACKHOE)
Model
PC230NHD-7*6 PC240LC-7 PC240NLC-7 PC270-7
Item
Source UK UK UK Japan
OPERATING WEIGHT* kg (lb) 23100 (50,930) 24130 (53,200) 23380 (51,540) 26900 (59,300)
FLYWHEEL (SAE) HP (kW)/RPM 143 (107)/1950 168 (125)/2000 168 (125)/2000 179 (134)/2050
HORSEPOWER: (DIN) PS (kW)/RPM 145 (107)/1950 170 (125)/2000 170 (125)/2000 182 (134)/2050
BUCKET CAPACITY RANGE 0.48 ~ 1.68 0.55~1.89 0.55~1.89 1.26
(SAE) m3 (cu.yd) (0.63) (2.20) (0.72) (2.47) (0.72) (2.47) (1.65)
PERFORMANCE:
Swing speed RPM 11.9 11.7 11.7 10.5
Max travel speed km/h (MPH) Hi 5.4 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 3.6 (2.2) Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 2.6 (1.6) Lo 3.1 (1.9) Lo 3.1 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 x 120 6-102 120 6-102 120 6-102 x 120
bore stroke (in) (4.02 x 4.72) (4.02 4.72) (4.02 4.72) (4.02 x 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 Variable 2 x Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 440 (116) 440 (116) 450 (119)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 550 (22)/ 700 (28)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.57 (8.1) 0.44 (6.3) 0.53 (7.5) 0.56 (7.96)
CAPACITY (Refilled):
Fuel tank 400 (105.7) 400 (106) 400 (106) 400 (105.6)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5500 (18'1") 5850 (19'2") 5850 (19'2") 5850 (19'2")
Arm mm (ft.in) 2900 (9'6") 3000 (9'10") 3000 (9'10") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 0.96 (1.26) 1.11 (1.45) 1.11 (1.45) 1.26 (1.65)
Model
PC270LC-7 PC290LC-7 PC290NLC-7 PC300-7***
Item
Source USA UK UK Japan
OPERATING WEIGHT* kg (lb) 28500 (62,830) 28480 (62,790) 28080 (61,910) 30800 (67,900)
FLYWHEEL (SAE) HP (kW)/RPM 179 (134)/2050 179 (134)/2050 179 (134)/2050 242 (180)/1900
HORSEPOWER: (DIN) PS (kW)/RPM 182 (134)/2050 182 (134)/2050 182 (134)/2050 245 (180)/1900
BUCKET CAPACITY RANGE 0.74 ~ 1.87 0.65 ~ 2.1 0.65 ~ 2.1 0.52~1.40
(SAE) m3 (cu.yd) (0.97) (2.45) (0.85) (2.75) (0.85) (2.75) (0.68) (1.83)
PERFORMANCE:
Swing speed RPM 10.5 10.5 10.5 9.5
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.2 (2.6) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.1 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D114E
No. of cylinders- mm 6-102 120 6-102 120 6-102 120 6-114 135
bore stroke (in) (4.02 4.72) (4.02 4.72) (4.02 4.72) (4.49 5.31)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 8.27 (505)
HYDRAULIC SYSTEM: 2 Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 450 (119) 450 (119) 450 (119) 535 (141)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 700 (28)/ 700 (28)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.51 (7.18) 0.51 (7.3) 0.58 (8.2) 0.64 (9.1)
CAPACITY (Refilled):
Fuel tank 400 (105.6) 400 (106) 400 (106) 605 (160)
Hydraulic oil tank ltr. (U.S. Gal) 143 (37.8) 143 (37.8) 143 (37.8) 188 (49.7)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19'2") 5850 (19'2") 5850 (19'2") 6470 (21'3")
Arm mm (ft.in) 3045 (10'0") 3000 (9'10") 3000 (9'10") 3185 (10'5")
Bucket (SAE) m3 (cu.yd) 1.25 (1.63) 1.16 (1.52) 1.16 (1.52) 1.40 (1.83)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*6 With two piece boom
3A-22
Specifications EXCAVATORS
(BACKHOE)
Model
PC300-7*4 PC300SE-7 PC300HD-7 PC300-6
Item
Source Japan Indonesia USA China
OPERATING WEIGHT* kg (lb) 30800 (67,900) 33490 (73,830) 36736 (80,990) 30800 (67,900)
FLYWHEEL (SAE) HP (kW)/RPM 242 (180)/1900 242 (180)/1900 242 (180)/1900 232 (173)/2050
HORSEPOWER: (DIN) PS (kW)/RPM 245 (180)/1900 245 (180)/1900 245 (180)/1900 235 (173)/2050
BUCKET CAPACITY RANGE 0.52~1.40 0.52 ~ 2.1 0.84 ~ 1.82 0.52 ~ 1.80
(SAE) m3 (cu.yd) (0.68) (1.83) (0.68) (2.74) (1.10) (2.38) (0.68) (2.35)
PERFORMANCE:
Swing speed RPM 9.5 9.3 9.5 10.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E SAA6D114E SAA6D114E SAA6D108E
No. of cylinders- mm 6-114 135 6-114 x 135 6-114 x 135 6-108 130
bore stroke (in) (4.49 5.31) (4.49 x 5.31) (4.49 x 5.31) (4.25 5.12)
Piston displacement ltr. (cu.in) 8.27 (505) 11.04 (674) 8.27 (505) 7.15 (436)
HYDRAULIC SYSTEM: 2 Variable 2 x Variable 2 x Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 535 (141) 535 (141) 535 (141) 524 (138)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 355 (5050)
Track shoe width/ mm (in)/ 600 (24)/ 800 (31.5)/ 700 (28)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.64 (9.1) 0.50 (7.11) 0.60 (8.52) 0.64 (9.1)
CAPACITY (Refilled):
Fuel tank 605 (160) 605 (160) 605 (160) 540 (143)
Hydraulic oil tank ltr. (U.S. Gal) 188 (49.7) 188 (49.7) 188 (49.7) 205 (54.2)
MACHINE SPEC:
Boom mm (ft.in) 6470 (21'3") 6470 (21'3") 6470 (21'3") 6470 (21'3")
Arm mm (ft.in) 3185 (10'5") 2220 (7'3") 3185 (10'5") 3185 (10'5")
Bucket (SAE) m3 (cu.yd) 1.40 (1.83) 2.1 (2.74) 0.88 (1.15) 1.40 (1.83)
Model
PC300LC-7*** PC300LC-7*4 PC300LC-7 PC350-7
Item
Source Japan Japan USA Japan
OPERATING WEIGHT* kg (lb) 31900 (70,330) 31900 (70,330) 33208 (73,210) 32300 (71,210)
FLYWHEEL (SAE) HP (kW)/RPM 242 (180)/1900 242 (180)/1900 242 (180)/1900 242 (180)/1900
HORSEPOWER: (DIN) PS (kW)/RPM 245 (180)/1900 245 (180)/1900 245 (180)/1900 245 (180)/1900
BUCKET CAPACITY RANGE 0.52~1.40 0.52~1.40 0.84 ~ 1.82 1.40
(SAE) m3 (cu.yd) (0.68) (1.83) (0.68) (1.83) (1.15) (2.38) (1.83)
PERFORMANCE:
Swing speed RPM 9.5 9.5 9.5 9.5
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E SAA6D114E SAA6D114E SAA6D114E
No. of cylinders- mm 6-114 135 6-114 135 6-114 135 6-114 135
bore stroke (in) (4.49 5.31) (4.49 5.31) (4.49 5.31) (4.49 5.31)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 8.27 (505) 8.27 (505)
HYDRAULIC SYSTEM: 2 Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 535 (141) 535 (141) 535 (141) 535 (141)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 700 (28)/ 700 (28)/ 800 (31.5)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.52 (7.36) 0.52 (7.36) 0.47 (6.7) 0.67 (9.5)
CAPACITY (Refilled):
Fuel tank 605 (160) 605 (160) 605 (160) 605 (160)
Hydraulic oil tank ltr. (U.S. Gal) 188 (49.7) 188 (49.7) 188 (49.7) 188 (49.7)
MACHINE SPEC:
Boom mm (ft.in) 6470 (21'3") 6470 (21'3") 6470 (21'3") 6470 (21'3")
Arm mm (ft.in) 3185 (10'5") 3185 (10'5") 3185 (10'5") 3185 (10'3")
Bucket (SAE) m3 (cu.yd) 1.40 (1.83) 1.40 (1.83) 0.88 (1.15) 1.40 (1.83)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
3A-23
Specifications EXCAVATORS
(BACKHOE)
Model
PC340LC-7 PC340NLC-7 PC350LC-7 PC380LC-6
Item
Source UK UK Japan UK
OPERATING WEIGHT* kg (lb) 33340 (73,500) 32860 (72,440) 33400 (73,630) 40300 (88,850)
FLYWHEEL (SAE) HP (kW)/RPM 242 (180)/1900 242 (180)/1900 242 (180)/1900 232 (173)/2050
HORSEPOWER: (DIN) PS (kW)/RPM 245 (180)/1900 245 (180)/1900 245 (180)/1900 235 (173)/2050
BUCKET CAPACITY RANGE 0.60 ~ 2.38 0.60 ~ 2.38 1.40 1.12 ~ 2.54
(SAE) m3 (cu.yd) (0.78) (3.11) (0.78) (3.11) (1.83) (1.46) (3.32)
PERFORMANCE:
Swing speed RPM 9.5 9.5 9.5 10.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 4.3 (2.7)
Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 3.4 (2.1)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 2.0 (1.2)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E SAA6D114E SAA6D114E SAA6D108E
No. of cylinders- mm 6-114 135 6-114 135 6-114 135 6-108 130
bore stroke (in) (4.49 5.31) (4.49 5.31) (4.49 5.31) (4.25 5.12)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 8.27 (505) 7.15 (436)
HYDRAULIC SYSTEM: 2 Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 536 (142) 536 (142) 535 (141) 536 (142)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 355 (5050)
Track shoe width/ mm (in)/ 700 (28)/ 600 (24)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.54 (7.7) 0.63 (9.0) 0.64 (9.1) 0.61 (8.7)
CAPACITY (Refilled):
Fuel tank 605 (160) 605 (160) 605 (160) 540 (143)
Hydraulic oil tank ltr. (U.S. Gal) 188 (49.7) 188 (49.7) 188 (49.7) 205 (54.2)
MACHINE SPEC:
Boom mm (ft.in) 6470 (21'3") 6470 (21'3") 6470 (21'3") 6470 (21'3")
Arm mm (ft.in) 3200 (10'6") 3200 (10'6") 3185 (10'3") 3185 (10'5")
Bucket (SAE) m3 (cu.yd) 1.38 (1.81) 1.38 (1.81) 1.40 (1.83) 1.32 (1.73)
Model PC400-6
PC400-6 PC400-6 PC400HD-6
Item EXCEL
Source Japan Japan China USA
OPERATING WEIGHT* kg (lb) 41400 (91,270) 41400 (91,270) 41400 (91,270) 44300 (97,665)
FLYWHEEL (SAE) HP (kW)/RPM 306 (228)/2050 306 (228)/1950 306 (228)/2050 306 (228)/2050
HORSEPOWER: (DIN) PS (kW)/RPM 310 (228)/2050 310 (228)/1950 310 (228)/2050 310 (228)/2050
BUCKET CAPACITY RANGE 1.3 ~ 2.2 1.3 ~ 2.2 1.3 ~ 2.2 1.14 ~ 2.61
(SAE) m3 (cu.yd) (1.7) (2.9) (1.7) (2.9) (1.7) (2.9) (1.49) (3.41)
PERFORMANCE:
Swing speed RPM 9.3 9.3 9.3 9.3
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D125E SA6D125E SA6D125E SAA6D125E
No. of cylinders- mm 6-125 150 6-125 150 6-125 x 150 6-125 150
bore stroke (in) (4.92 5.90) (4.92 5.90) (4.92 x 5.90) (4.92 5.91)
Piston displacement ltr. (cu.in) 11.04 (673) 11.04 (673) 11.04 (673) 11.04 (674)
HYDRAULIC SYSTEM: 2 Variable 2 Variable 2 x Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 652 (172) 616 (163) 652 (172) 652 (172)
Max. oil pressure kg/cm2 (PSI) 355 (5050) 355 (5050) 355 (5050) 355 (5050)
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.79 (11.2) 0.79 (11.2) 0.79 (11.2) 0.68 (9.67)
CAPACITY (Refilled):
Fuel tank 605 (160) 605 (160) 605 (160) 605 (160)
Hydraulic oil tank ltr. (U.S. Gal) 270 (71.3) 270 (71.3) 270 (71.3) 270 (71.3)
MACHINE SPEC:
Boom mm (ft.in) 7060 (23'2") 7060 (23'2") 7060 (23'2") 7060 (23'2")
Arm mm (ft.in) 3380 (11'1") 3380 (11'1") 3380 (11'1") 3380 (11'1")
Bucket (SAE) m3 (cu.yd) 1.80 (2.35) 1.80 (2.35) 1.80 (2.35) 1.82 (2.38)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
3A-24
Specifications EXCAVATORS
(BACKHOE)
Model PC400LC-6
PC400SE-6 PC400LC-6 PC400LC-6
Item EXCEL
Source Indonesia Japan Japan USA
OPERATING WEIGHT* kg (lb) 43700 (96,340) 42600 (93,920) 42150 (92,920) 42600 (95,147)
FLYWHEEL (SAE) HP (kW)/RPM 306 (228)/2050 306 (228)/2050 306 (228)/1950 306 (228)/2050
HORSEPOWER: (DIN) PS (kW)/RPM 310 (228)/2050 310 (228)/2050 310 (228)/1950 310 (228)/2050
BUCKET CAPACITY RANGE 2.8 1.3 ~ 2.2 1.3 ~ 2.2 1.37 ~ 2.61
(SAE) m3 (cu.yd) (3.66) (1.7) (2.9) (1.7) (2.9) (1.79) (3.41)
PERFORMANCE:
Swing speed RPM 9.3 9.3 9.3 9.3
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D125E SA6D125E SA6D125E SAA6D125E
No. of cylinders- mm 6-125 x 150 6-125 150 6-125 150 6-125 150
bore stroke (in) (4.92 x 5.91) (4.92 5.90) (4.92 5.90) (4.92 5.91)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (673) 11.04 (673) 11.04 (674)
HYDRAULIC SYSTEM: 2 x Variable 2 Variable 2 Variable 2 Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 652 (172) 652 (172) 616 (163) 652 (172)
Max. oil pressure kg/cm2 (PSI) 355 (5050) 355 (5050) 355 (5050) 355 (5050)
Track shoe width/ mm (in)/ 600 (23.6)/ 700 (28)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.84 (11.9) 0.65 (9.2) 0.75 (10.7) 0.66 (9.36)
CAPACITY (Refilled):
Fuel tank 605 (160) 605 (160) 605 (160) 605 (160)
Hydraulic oil tank ltr. (U.S. Gal) 270 (71.3) 270 (71.3) 270 (71.3) 270 (71.3)
MACHINE SPEC:
Boom mm (ft.in) 7060 (23'2") 7060 (23'2") 7060 (23'2") 7060 (23'2")
Arm mm (ft.in) 2400 (7'10") 3380 (11'1") 3380 (11'1") 3380 (11'1")
Bucket (SAE) m3 (cu.yd) 2.8 (3.66) 1.80 (2.35) 1.80 (2.35) 1.82 (2.38)
3A-25
Specifications EXCAVATORS
(BACKHOE)
Model
PC600-6 PC600LC-6 PC600LC-6*6 PC600SE-6
Item
Source Japan Japan Japan UK
OPERATING WEIGHT* kg (lb) 56780 (125,180) 57780 (127,380) 59600 (131,390) 57480 (126,720)
FLYWHEEL (SAE) HP (kW)/RPM 385 (287)/1800 385 (287)/1800 385 (287)/1800 385 (287)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 390 (287)/1800 390 (287)/1800 390 (287)/1800 390 (287)/1800
BUCKET CAPACITY RANGE 2.0 ~ 3.5 2.0 ~ 3.5 1.71 ~ 3.72 2.4 ~ 3.5
(SAE) m3 (cu.yd) (2.62) (4.58) (2.62) (4.58) (2.23) (4.86) (3.14) (4.58)
PERFORMANCE:
Swing speed RPM 8.3 8.3 8.3 8.3
Max travel speed km/h (MPH) Hi 4.9 (3.0) Hi 4.9 (3.0) Hi 4.9 (3.0) Hi 4.9 (3.0)
Model PC600-6*4
PC600LC-6*4 PC750-6 PC750-6*6
Item QUARRY
Source UK UK Japan Japan
OPERATING WEIGHT* kg (lb) 58280 (128,480) 57780 (127,380) 71570 (157,780) 73700 (162,480)
FLYWHEEL (SAE) HP (kW)/RPM 385 (287)/1800 385 (287)/1800 454 (338)/1800 454 (338)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 390 (287)/1800 390 (287)/1800 460 (338)/1800 460 (338)/1800
BUCKET CAPACITY RANGE 2.4 ~ 2.8 2.4 ~ 2.8 2.8 ~ 3.1 2.49 ~ 3.72
(SAE) m3 (cu.yd) (3.14) (3.66) (3.14) (3.66) (3.66) (4.05) (3.25) (4.75)
PERFORMANCE:
Swing speed RPM 8.3 8.3 6.8 6.8
Max travel speed km/h (MPH) Hi 4.9 (3.0) Hi 4.9 (3.0) Hi 4.2 (2.6) Hi 4.2 (2.6)
3A-26
Specifications EXCAVATORS
(BACKHOE)
Model
PC750LC-6 PC750SE-6 PC750SE-6*6 PC750SE-6*4
Item
Source Japan Japan Japan UK
OPERATING WEIGHT* kg (lb) 77600 (171,060) 72370 (159,550) 77500 (170,850) 76245 (168,090)
FLYWHEEL (SAE) HP (kW)/RPM 454 (338)/1800 454 (338)/1800 454 (338)/1800 444 (331)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 460 (338)/1800 460 (338)/1800 460 (338)/1800 450 (331)/1800
BUCKET CAPACITY RANGE 3.1 4.0 ~ 4.5 3.06 ~ 4.59 3.6 ~ 6.0
(SAE) m3 (cu.yd) (4.05) (5.23) (5.89) (4.0) (6.0) (4.71) (7.85)
PERFORMANCE:
Swing speed RPM 6.8 6.8 6.8 5.7
Max travel speed km/h (MPH) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6)
Model
PC750LC-6*4 PC800-6 PC800SE-6 PC1250-7
Item
Source UK Japan Japan Japan
OPERATING WEIGHT* kg (lb) 80960 (178,480) 75270 (165,940) 74770 (164,840) 106700 (235,230)
FLYWHEEL (SAE) HP (kW)/RPM 444 (331)/1800 454 (338)/1800 454 (338)/1800 651 (485)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 450 (331)/1800 460 (338)/1800 460 (338)/1800 660 (485)/1800
BUCKET CAPACITY RANGE 3.6 ~ 6.0 3.4 4.0 ~ 4.5 3.4 ~ 5.2
(SAE) m3 (cu.yd) (4.71) (7.85) (4.45) (5.23) (5.89) (4.45) (6.80)
PERFORMANCE:
Swing speed RPM 5.7 6.8 6.8 5.5
Max travel speed km/h (MPH) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 3.2 (2.0)
3A-27
Specifications EXCAVATORS
(BACKHOE)
Model
PC1250LC-7 PC1250SP-7 PC1800-6 PC1400-1
Item
Source Japan Japan Japan Germany
OPERATING WEIGHT* kg (lb) 113200 (249,560) 109500 (241,400) 180000 (396,830) 137000 (302,030)
FLYWHEEL (SAE) HP (kW)/RPM 651 (485)/1800 651 (485)/1800 908 (676)/1800 758 (565)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 660 (485)/1800 660 (485)/1800 920 (676)/1800 768 (565)/1800
BUCKET CAPACITY RANGE 3.4 ~ 5.2 6.7 5.6 ~ 12.0 8.5 ~ 9.5
(SAE) m3 (cu.yd) (4.45) (6.80) (8.76) (7.3) (15.7) (11.1) (12.4)
PERFORMANCE:
Swing speed RPM 5.5 5.5 4.5 6.2
Max travel speed km/h (MPH) Hi 3.2 (2.0) Hi 3.2 (2.0) 2.7 (1.7) 2.4 (1.5)
Model
PC3000-1 PC4000-6 PC5500-6 PC8000-6
Item
Source Germany Germany Germany Germany
500000 710000
OPERATING WEIGHT* kg (lb) 253000 (557,760) 380000 (837,750) (1,565,270)
(1,102,300)
FLYWHEEL (SAE) HP (kW)/RPM 1260 (940)/1800 1875 (1400)/1800 2520 (1880)/1800 4020 (3000)/1800
HORSEPOWER: (DIN) PS (kW)/RPM 1278 (940)/1800 1904 (1400)/1800 2554 (1880)/1800 4076 (3000)/1800
BUCKET CAPACITY RANGE 12 ~ 20 16 ~ 28 21 ~ 36 28 ~ 48
(SAE) m3 (cu.yd) (15.7) (26.2) (20.9) (36.6) (25.7) (39.7) (30.9) (52.9)
PERFORMANCE:
Swing speed RPM 4.6 4.0 3.6 3.45
Max travel speed km/h (MPH) 2.4 (1.5) 2.1 (1.3) 2.3 (1.4) 2.14 (1.3)
3A-28
Dimensions EXCAVATORS
(BACKHOE)
E L
D
K
C
G
I
H A
J B
FVBH0017
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
650 915 290 650 570 100 450 130 580 2100 0.92 0.48
PC01-1
(2'2") (3') (11") (2'2") (1'10") (3.9") (1'6") (5") (1'11") (6'11") (3') (1'7")
792 1085 325 700 690 150 540 150 690 2300 1.13 0.575
PC02-1
(2'7") (3'7") (1'1") (2'4") (2'3") (5.9") (1'9") (6") (2'3") (7'7") (3'8") (1'11")
900 1225 350 790 700 2100 180 520 180 700 2730 1.357 0.684
PC09-1
(2'11") (4') (1'2") (2'7") (2'4") (6'11") (7.1") (1'8") (7") (2'4") (8'11") (4'5") (2'3")
3626 0.88
1015 437 1070 2229 770 230 1000 1227 (11'11") (2'11")
PC12R-8
(3'4") (1'5") (3'6") (7'4") (2'6") (9") (3'3") (4') 3647 1.13
(12') (3'8")
770/ 1000/ 3570 0.965
1212 1555 440 790 2430 205 (2'6") 230 (3'3") 1190 (11'9") 1.76 (3'2")
PC15MRX-1
(4'0") (5'1") (1'5") (2'7") (8'10") (8.1") 1020 (9") 1250 (3'11") (5'6") 1.125
(3'4") (4'1") (4'0")
3745 0.965
1015 437 1070 2229 770 230 1000 1227 (12'3") (3'2")
PC15R-8
(3'4") (1'5") (3'6") (7'4") (2'6") (9") (3'3") (4') 3780 1.215
(12'5") (4')
3930 0.93
1440 1895 540 925 1390 2410 285 1200 250 1450 1380 (12'11") 1.81 (3'1")
PC20MRX-1
(4'9") (6'3") (1'9") (3'0") (4'7") (7'9") (11.2") (3'11") (10") (4'9") (4'6") (5'11") 1.28
(4'2")
4250 1.07
1340 545 1240 1420 2450 1120 250 1430 1400 (13'11") (3'6")
PC20R-8
(4'5") (1'9") (4'1") (4'8") (8'1") (3'8") (10") (4'8") (4'7") 4320 1.32
(14'2") (4'4")
4140 1.11
1485 1955 560 955 1530 2460 320 1250 300 1550 1440 (13'7") 2.12 (3'8")
PC27MRX-1* (4'10") (6'5") (2'2") (3'2") (5'0") (8'1") (1.1") (4'1") (12") (5'1") (4'9") (6'11")
4230 1.41
(13'11") (4'8")
4525 1.2
1485 585 1240 2490 1200 300 1500 1440 (14'10") (3'11")
PC27R-8 (4'10") (1'11") (4'1") (8'2") (3'11") (12") (4'11") (4'9") 4655 1.5
(15'3") (4'11")
4660 1.26
1610 2070 560 1040 1530 2460 320 1250 300 1550 1440 (15'3") 2.22 (4'1")
PC30MRX-1
(5'3") (6'9") (1'10") (3'5") (5'1") (8'1") (1'1") (4'1") (12") (5'1") (4'9") (7'3") 1.66
(5'5")
4800 1.35
1615 2070 580 1030 1530 2500 290 1440 300 1740 1475 (15'9") 2.55 (4'5")
PC35MRX-1*
(5'4") (6'9") (1'11") (3'5") (5'0") (8'2") (11.4") (4'9") (12") (5'9") (4'10") 4850 (8'4") 1.75
(15'11") (5'9")
5090 1.35
1610 580 1415 2500 1220 300 1520 1450 (16'8") (4'5")
PC35R-8
(5'3") (1'11") (4'8") (8'2") (4') (12") (5') (4'9") 5155 1.75
(16'11") (5'9")
5215 1.38
1910 2420 640 1235 1930 2565 315 1560 400 1960 1555 (17'1") 2.695 (4'6")
PC40MRX-1
(6'3") (7'11") (2'1") (4'1") (6'3") (8'5") (1'0") (5'1") (16") (6'5") (5'1") (8'10") 1.9
(6'3")
5485 1.48
1510 (18') (4'10")
1910 640 1470 2560 1500 400 1900
PC45R-8 (4'11")
(6'3") (2'1") (4'10") (8'5") (4'11") (16") (6'3") 5555 1.9
(18'3") (6'3")
5320 1.48
1910 2420 640 1235 1930 2565 315 1560 400 1960 1555 (17'5") 2.785 (4'10")
PC45MRX-1
(6'3") (7'11") (2'1") (4'1") (6'3") (8'5") (1'0") (5'1") (16") (6'5") (5'1") (9'2") 1.9
(6'3")
3A-29
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
6080 2500 1.65
2130 2765 750 1750 2180 2590 350 1700 450 2150 1750 (19'11") (8'2") 3.71 (5'5")
PC60-7
(7') (9'1") (2'6") (5'9") (7'2") (8'6") (1'2") (5'7") (18") (7'1") (5'9") 6105 2830 (12'2") 2.25
(20') (9'3") (7'5")
5875 1.7
2200 2785 750 1475 2000 2690 400 1650 450 2050 1690 (19'3") (5'7")
PC75R-2
(7'3") (9'2") (2'6") (4'10") (6'7") (8'10) (1'4") (5'5") (18") (6'9") (5'7") 2.1
(6'11")
6286 2465 1.65
2235 2840 735 1240 2330 2730 360 1870 450 2320 1745 (20'7") (8'1") 3.71 (5'5")
PC78US-6
(7'4") (9'4") (2'5") (4'1") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (5'9") 5785 2830 (12'2") 2.25
(19'0") (9'3") (7'5")
6200 2200 1.65
2235 2840 735 1260 2330 2730 360 1870 450 2320 1745 (20'4") (7'3") 3.40 (5'5")
PC78MR-6
(7'4") (9'4") (2'5") (4'2") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (5'8") (11'2") 2.25
(7'5")
6150 2300 1.85
2340 775 1510 2120 2700 430 1800 450 2200 1715 (20'2") (7'7") 2.95 (6'1")
PC95R-2
(7'8") (2'7") (4'11") (6'11") (8'10") (1'5") (5'11") (18") (7'3") (5'8") 6205 2700 (9'8") 2.3
(20'4") (7'7") (7'7")
7170 2630 2.06
(23'6") (8'8") (6'9")
2575 3305 855 2110 2455 2715 400 1960 500 2460 1805 7170 2725 4.26 2.36
PC100-6
(8'5") (10'10") (2'10") (6'11") (8'1") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (23'6") (8'11") (14') (7'9")
7085 3080 2.86
(23'3") (10'11") (9'5")
7170 2670 2.06
(23'6") (8'9") (6'9")
2910 3820 1120 2110 2455 2980 560 1970 800 2770 2070 7170 2960 4.26 2.36
PC100L-6
(9'7") (12'6") (3'8") (6'11") (8'1") (9'9") (1'10") (6'6") (31.4") (9'1") (6'10") (23'6") (9'9") (14') (7'9")
7170 3045 2.86
(23'6") (10') (9'5")
PC100F-6 2890 3755 1120 2130 2455 3135 600 1960 900 2860 2050 7475 2686 4.26 2.36
(LOGGING) (9'5") (12'3") (3'7") (7') (8'1") (10'3") (2') (6'4") (35.4") (9'4") (6'9") (24'6") (8'8") (14') (7'9")
PC100F-6 2890 3755 1120 2130 2455 2960 600 1960 900 2860 2050 7175 2720 4.26 2.36
(AGRO) (9'5") (12'3") (3'7") (7') (8'1") (9'7") (2') (6'4") (35.4") (9'4") (6'9") (23'6") (8'11") (14') (7'9")
PC100F-6Z 2890 3755 1120 2130 2455 2960 600 1960 900 2860 2050 7175 2720 4.26 2.36
(AGRO ECO) (9'5") (12'3") (3'7") (7') (8'1") (9'7") (2') (6'4") (35.4") (9'4") (6'9") (23'6") (8'11") (14') (7'9")
1.85
(6'1")
2420 868 1577 2120 2790 1900 500 2400 6480 2715 2.0
PC110R-1
(7'11") (2'10") (5'2") (6'11") (9'2") (6'3") (20") (7'10") (21'3") (8'11) (6'7")
2.3
(7'7")
7590 2620 2.1
(24'11") (8'7") (6'11")
PC120-6
2750 3480 855 2110 2455 2715 400 1960 500 2460 1805 7595 2715 4.6 2.5
PC120-6 (9') (11'5") (2'10") (6'11") (8'1") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (24'11") (8'11") (15'1") (8'2")
EXCEL
7510 3075 3.0
(24'8") (10'1") (9'10")
7590 2620 2.1
(24'11") (8'7") (6'11")
2750 3480 855 2110 2455 2715 400 1960 600 2560 1805 7595 2715 4.6 2.5
PC120-6*
(9') (11'5") (2'10") (6'11") (8'1") (8'11") (1'4") (6'5") (24") (8'5") (5'11") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'8") (10'1") (9'10")
7590 2620 2.1
(24'11") (8'7") (6'11")
3100 3830 895 2110 2445 2755 400 1990 600 2590 1845 7595 2715 4.6 2.5
PC120LC-6*
(10'2") (12'7") (2'11") (6'11") (8'1") (8'11") (1'4") (6'6") (24") (8'6") (6'1") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'11") (10'1") (9'10")
* For USA
3A-30
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
7225 2630 2.1
(23'8") (8'8") (6'11")
2750 3480 895 1480 2490 2810 390 1990 500 2490 1975 7220 2850 4.6 2.5
PC128US-2
(9') (11'5") (2'11") (4'10") (8'2") (9'3") (1'3") (6'6") (20") (8'6") (6'6") (23'8") (9'4") (15'1") (8'2")
7120 3190 3.0
(23'4") (10'6") (9'10")
7590 2620 2.1
(24'11") (8'7") (6'11")
2750 3480 855 2130 2455 2715 400 1960 500 2460 1805 7595 2715 4.6 2.5
PC130-6**
(9') (11'5") (2'10") (7') (8'1") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (24'11") (8'11") (15'1") (8'2")
7510 3075 2.9
(24'8") (10'1") (9'6")
PC130-6 2750 3480 855 2110 2480 2715 400 1960 500 2460 1805 7595 2715 4.6 2.5
MIGHTY (9') (11'5") (2'10") (6'11") (8'2") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (24'11") (8'11") (15'1") (8'2")
7425 2890 2.5
3170 3965 1030 1545 2490 2900 440 1990 600 2590 2195 (24'4") (9'6") 4.6 (8'2")
PC158USLC-2
(10'5") (13'0") (3'5") (5'1") (8'2") (9'6") (1'5") (6'6") (2'4") (8'6") (7'2") 7400 3200 (15'1") 3.0
(24'3") (10'6") (9'10")
8565 2990 2.25
(28'1") (9'10") (7'5")
3170 3965 1055 2390 2490 2970 440 1990 500 2490 2090 8565 3000 5.15 2.61
PC160LC-7
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (20") (8'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
8565 2990 2.25
(28'1") (9'10") (7'5")
3170 3965 1055 2390 2490 2970 440 1990 500 2490 2090 8565 3000 5.15 2.61
PC160LC-7**
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (20") (8'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
8565 3000 2.61
3170 3965 1055 2390 2490 2970 440 1990 600 2590 2090 (28'1") (9'10") 5.15 (8'7")
PC160LC-7***
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (24") (8'6") (6'10") 8565 3100 (16'11") 2.9
(28'1") (10'2") (9'6")
8565 2990 2.25
(28'1") (9'10") (7'5")
PC180LC-7 3270 4065 1055 2390 2490 2970 440 2200 600 2800 2090 8565 3000 5.15 2.61
(10'9") (13'4") (3'6") (7'10") (8'2") (9'9") (1'5") (7'3") (24") (9'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
9480 2985 1.84
(3'1") (9'10") (6'0")
PC200-7 3270 4080 1085 2710 2710 3000 440 2200 600 2800 2095 9495 3190 5.7 2.41
PC200-7*4 (10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (24") (9'2") (6'10") (3'2") (10'6") (18'8") (7'11")
PC210-7*4
9425 2970 2.925
(30'11") (9'9") (9'7")
9495 3190 2.41
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 (31'2") (10'6") 5.7 (7'11")
PC200-7*
(10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") 9425 2970 (18'8") 2.925
(30'11") (9'9") (9'7")
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 9110 3280 5.2 1.9
PC200-7SEF
(10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") (29'10") (10'10") (17'1") (6'6")
9480 2985 1.84
(31'1") (9'10") (6'0")
PC200LC-7 3640 4450 1085 2710 2710 3000 440 2380 700 3080 2095 9495 3190 5.7 2.41
PC200LC-7*4 (1'11") (14'7") (3'7") (8'11") (8'11") (9'10") (1'5") (7'10") (28") (10'1") (6'10") (31'2") (10'6") (18'8") (7'11")
PC210LC-7*4
9425 2970 2.925
(30'11") (9'9") (9'7")
* USA source
** UK source
*** For USA
*4 China source
3A-31
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
9495 3190 2.41
3640 4450 1085 2710 2710 3000 440 2380 700 3080 2095 (31'2") (10'6") 5.7 (7'11")
PC200LC-7*
(1'11") (14'7") (3'7") (8'11") (8'11") (9'10") (1'5") (7'10") (28") (10'1") (6'10") 9425 2970 (18'8") 2.925
(30'11") (9'9") (9'7")
9540 2985 1.8
(31'4") (9'10") (5'11")
PC210-7** 3270 4080 1100 2770 2515 3015 440 2200 600 2800 2110 9555 3190 5.7 2.4
(10'9") (13'5") (3'7") (9'1") (8'3") (9'11") (1'5") (7'3") (24") (9'2") (6'11") (31'4") (10'6") (18'8") (7'10")
9485 2970 2.9
(31'1") (9'9") (9'6")
9540 2985 1.8
(31'4") (9'10") (5'11")
PC210LC-7** 3640 4450 1100 2770 2515 3015 440 2380 700 3080 2110 9555 3190 5.7 2.4
(11'11") (14'7") (3'7") (9'1") (8'3") (9'11") (1'5") (7'10") (28") (10'1") (6'11") (31'4") (10'6") (18'8") (7'10")
9485 2970 2.9
(31'1") (9'9") (9'6")
9540 2985 1.8
(31'4") (9'10") (5'11")
3640
PC210NLC-7** (11'11") 4450 1100 2770 2515 3015 440 2040 500 2540 2110 9555 3190 5.7 2.4
(14'7") (3'7") (9'1") (8'3") (9'11") (1'5") (6'8") (20") (8'4") (6'11") (31'4") (10'6") (18'8") (7'10")
9485 2970 2.9
(31'1") (9'9") (9'6")
9865 3220 2.0
(32'4") (10'7") (6'7")
PC220-7 3460 4265 1100 2905 2710 3015 440 2380 600 2980 2110 9960 3295 5.85 2.5
(11'4") (14'0") (3'7") (9'6") (8'11") (9'11") (1'5") (7'10") (24") (9'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3160 3.045
(32'5") (10'4") (10'0")
9865 3220 2.0
(32'4") (10'7") (6'7")
9960 3295 2.5
3460 4265 1100 2905 2710 3015 440 2380 600 2980 2110 (32'8") (10'10") 5.85 (8'2")
PC220-7*** (11'4") (14'0") (3'7") (9'6") (8'11") (9'11") (1'5") (7'10") (24") (9'9") (6'11") (19'2")
9885 3160 3.05
(32'5") (10'9") (10')
9910 3265 3.5
(32'6") (10'9") (11'6")
9865 3220 2.0
(32'4") (10'7") (6'7")
PC220LC-7 3845 4640 1100 2905 2710 3015 440 2580 700 3280 2110 9960 3295 5.85 2.5
(12'7") (15'3") (3'7") (9'6") (8'11") (9'11") (1'5") (8'6") (28") (10'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3160 3.045
(32'4") (10'4") (10'0")
9885 3160 3.045
3845 4640 1100 2905 2710 3015 440 2580 800 3380 2110 (32'5") (10'4") 5.85 (10'0")
PC220LC-7* (12'7") (15'3") (3'7") (9'6") (8'11") (9'11") (1'5") (8'6") (31.5") (11'1") (6'11") (19'2") 3.505
9910 3270
(32'6") (10'9") (11'6")
9865 3220 2.0
(32'4") (10'7") (6'7")
9960 3295 2.5
3845 4640 1100 2905 2710 3015 440 2580 600 3180 2110 (32'8") (10'10") 5.85 (8'2")
PC220LC-7*** (12'7") (15'3") (3'7") (9'6") (8'11") (9'11") (1'5") (8'6") (24") (10'5") (6'11") (19'2")
9885 3160 3.05
(32'5") (10'9") (10')
9910 3265 3.5
(32'6") (10'9") (11'6")
PC228US-3 3270 4080 1060 1680 2980 3010 440 2200 600 2800 2285 8700 2980 5.7 2.9
(10'9") (13'5") (3'6") (5'6") (9'9") (9'11") (1'5") (7'3") (24") (9'2") (7'6") (28'7") (9'9") (18'8") (9'6")
3640 4450
PC228USLC-3 (11'11") (14'7") 1060 1680 2980 3010 440 2380 700 3080 2285 8890 2980 5.7 2.9
(3'6") (5'6") (9'9") (9'11") (1'5") (7'10") (28") (10'1") (7'6") (29'2") (9'9") (18'8") (9'6")
* USA source
** UK source
*** China source
3A-32
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
A B C D E F G H I J K M N Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in) m m
(ft.in) (ft.in)
9540 2985 1.8
(31'4") (9'10") (5'11")
3460 4305 1125 2770 2515 3040 465 1990 550 2540 2135 9555 3190 5.7 2.4
PC230-7NHD*
(11'4") (14'1") (3'8") (9'1") (8'3") (10'0") (1'6") (6'6") (22") (8'4") (7'0") (31'4") (10'6") (18'8") (7'10")
9485 2970 2.9
(31'1") (9'9") (9'6")
9935 3270 1.8
(32'7") (10'9") (5'11")
3460 4305 1125 2770 2515 3040 465 1990 550 2540 2135 9790 3535 5.5 2.4
PC230-7NHD**
(11'4") (14'1") (3'8") (9'1") (8'3") (10'0") (1'6") (6'6") (22") (8'4") (7'0") (32'1") (11'7") (18'1") (7'10")
9775 3510 2.9
(32'1") (11'6") (9'6")
9865 3220 2.0
(21'9") (10'7") (6'7")
9960 3295 2.5
3845 4640 1100 2905 2710 3015 440 2580 700 3280 2110 (32'8") (10'10") 5.85 (8'2")
PC240LC-7
(12'7") (15'3") (3'7") (9'6") (8'11") (9'11") (1'5") (8'6") (28") (10'9") (6'11") 9885 3160 (19'2") 3.0
(32'5") (10'4") (9'10")
9910 3270 3.5
(32'6") (10'9") (11'6")
9865 3220 2.0
(21'9") (10'7") (6'7")
9960 3295 2.5
3640 4450 1100 2905 2710 3015 440 2380 600 2980 2110 (32'8") (10'10") 5.85 (8'2")
PC240NLC-7 (11'11") (14'7") (3'7") (9'6") (8'11") (9'11") (1'5") (7'10") (24") (9'9") (6'11") (19'2")
9885 3160 3.0
(32'5") (10'4") (9'10")
9910 3270 3.5
(32'6") (10'9") (11'6")
4030 4955 1180 2905 2710 3100 498 2590 700 3290 2200 9790 3210 5.85 3.05
PC270LC-7 (13'3") (16'3") (3'10") (9'4") (8'11") (9'11") (1'8") (8'6") (28") (10'10") (7'3")
(32'1") (10'6") (19'2") (10'0")
9890 3290 3.5
(32'5") (10'10") (11'6")
9820 3200 2.0
(32'3") (10'6") (6'7")
9940 3320 2.5
3700 4625 1186 2905 2710 3100 498 2590 700 3290 2200 (32'7") (10'11") 5.85 (8'2")
PC290LC-7
(12'2") (15'2") (3'11") (9'6") (8'11") (10'2") (1'8") (8'6") (28") (10'10") (7'3") 9790 3210 (19'2") 3.05
(32'1") (10'6") (10'0")
9890 3280 3.5
(32'5") (10'9) (11'6")
9820 3200 2.0
(32'3") (10'6") (6'7")
9940 3320 2.5
3700 4625 1186 2905 2710 3100 498 2390 700 3090 2200 (32'7") (10'11") 5.85 (8'2")
PC290NLC-7
(12'2") (15'2") (3'11") (9'6") (8'11") (10'2") (1'8") (7'10") (28") (10'2") (7'2") 9790 3210 (19'2") 3.05
(32'1") (10'6") (10')
9890 3280 3.5
(32'5") (10'9") (11'6")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
3700 4625 1185 3405 2995 3130 500 2590 600 3190 2580** (36'8") (11'2") 6.47 (8'4")
PC300-7
(12'2") (15'2") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (24") (10'6") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
3A-33
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
11105 3465 2.2
(36'5") (11'4") (7'3")
10990 3420 2.55
3700 4625 1185 3285 2995 3130 500 2590 600 3190 2230 (36'1") (11'3") 6.47 (8'4")
PC300-6*4
(12'2") (15'2") (3'11") (10'9") (9'10") (10'3") (1'8") (8'6") (24") (10'6") (7'4") 10935 3255 (21'3") 3.185
(35'11") (10'8") (10'5")
10975 3590 4.02
(36') (11'9") (13'2")
3700 4625 1185 3405 2995 3130 500 2590 800 3390 2580** 11290 3400 6.47 2.2
PC300SE-7***
(12'2") (15'2") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (31'5") (11'3") (8'6") (37'1") (11'2") (21'3") (7'3")
3070 11140 3280 3.185
4020 5026 1420 3404 2997 3365 706 2870 800 (10'1") 2591** (36'7") (10'9") 6.47 (10'5")
PC300HD-7 (13'3") (16'6") (4'8") (11'2") (9'10") (11'0") (2'4") (9'5") (31.5") 3570*** (8'6") (21'3")
11170 3610 4.02
(11'9") (36'8") (11'10") (13'2")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
4030 4955 1185 3405 2995 3130 500 2590 700 3290 2580** (36'8") (11'2") 6.47 (8'4")
PC300LC-7
(13'3") (16'3") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (24") (10'10") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11140 3280 3.185
4039 4953 1194 3404 2997 3023 508 2580 800 3380 2591** (36'7") (10'9") 6.47 (10'5")
PC300LC-7*
(13'3") (16'3") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (31.5") (11'1") (8'6") 11170 3760 (21'3") 4.02
(36'8") (12'4") (13'2")
3700 4625 1185 3405 3145 3130 500 2590 600 3190 2580** 11140 3280 6.47 3.185
PC350-7
(12'2") (15'2") (3'11") (11'2") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
4030 4955 1185 3405 3145 3130 500 2590 600 3190 2580** 11140 3280 6.47 3.185
PC350LC-7
(13'3") (16'3") (3'11") (11'2") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
11290 3400 2.2
(37'1") (11'2") (7'3")
11180 3410 2.55
4030 4955 1186 3405 2995 3130 498 2590 700 3290 2580** (36'8") (11'2") 6.47 (8'4")
PC340LC-7
(13'3") (16'3") (3'11") (10'9") (9'10") (10'3") (1'7") (8'6") (28") (10'10") (8'6") 11140 3280 (21'3") 3.2
(36'7") (10'9") (10'6")
11170 3760 4.0
(36'8") (12'4") (13'1")
11290 3400 2.2
(37'1") (11'2") (7'3")
11180 3410 2.55
4030 4955 1186 3405 2995 3130 498 2390 600 2990 2580** (36'8") (11'2") 6.47 (8'4")
PC340NLC-7
(13'3") (15'11") (3'11") (10'9") (9'10") (10'3") (1'7") (7'10") (24") (9'10") (8'6") 11140 3280 (21'3") 3.2
(36'7") (10'9") (10'6")
11170 3760 4.0
(36'8") (12'4") (13'1")
11177 3524 2.2
(36'8") (11'7") (7'3")
3570 11066 3411 2.55
4350 5356 1320 3150 2995 3265 555 2870 700 (11'9") 2330 (36'4") (11'2") 6.47 (8'4")
PC380LC-6 (14'3") (17'7") (4'3") (10'4") (9'9") (10'5") (1'10") (9'5") (28") 3072* (8'6") (21'3") 3.185
11015 3255
(10'1") (36'2") (10'8") (10'5")
11052 3631 4.02
(36'3") (11'11") (13'2")
* USA source
** Top of engine cover
*** USA source with variable gauge
*4 China source
3A-34
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
11915 3715 2.4
(39'1") (12'2") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
PC400-6 4020 5025 1320 3500 2995 3265 555 2740 600 3340 2365 11835 3635 7.06 3.38
PC400-6** (13'2") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
11915 3715 2.4
(39'1") (12'2") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
PC400-6 4020 5025 1320 3500 2995 3265 555 2740 600 3340 2365 11835 3635 7.06 3.38
EXCEL (13'2") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
11890 3710 2.4
(39'1") (12'2") (7'10")
11890 3790 2.9
(39'1") (12'5") (9'6")
4350 5355 1455 3500 2995 3400 706 2870 700 3570 2850 11820 3675 7.06 3.38
PC400HD-6*
(14'3") (17'7") (4'5") (11'6") (9'10") (11'2") (2'4") (9'5") (28") (11'9") (9'4") (38'10") (11'11") (23'2") (11'1")
11850 3880 4.0
(38'11") (12'5") (13'1")
11740 4320 4.8
(38'4") (14'5") (15'9")
PC400SE-6 4020 5025 1320 3500 2995 3255 555 2740 600 3340 2365 8424 3485 7.06 2.4
(13'2") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (7'9") (27'7") (11'5") (23'2") (7'10")
11915 3715 2.4
(39'1") (12'2") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
4350 5355 1320 3500 2995 3265 555 2740 700 3440 2365 11835 3635 7.06 3.38
PC400LC-6
(14'3") (17'7") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (28") (11'3") (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
11915 3715 2.4
(39'1") (12'2") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
PC400LC-6 4350 5355 1320 3500 2995 3265 555 2740 600 3340 2365 11835 3635 7.06 3.38
EXCEL (14'3") (17'7") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11'3") (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
11915 3715 2.4
(39'7") (12'12") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
4350 5355 1320 3500 2995 3265 555 2740 700 3440 2365 11835 3635 7.06 3.38
PC400LC-6*
(14'3") (17'7") (4'4") (11'6") (9'10") (10'6") (1'10") (9') (28") (11'3") (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
3A-35
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
PC450-6 4020 5025 1320 3500 3145 3265 555 2740 600 3340 2365 11925 3630 7.06 3.38
MIGHTY (13'2") (16'6") (4'4") (11'6") (10'4") (10'9") (1'10") (9') (24") (11') (7'9") (39'2") (11'11") (23'2") (11'1")
PC450LC-6 4350 5355 1320 3500 3145 3265 555 2740 600 3340 2365 11925 3630 7.06 3.38
MIGHTY (14'3") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (7'9") (39'2") (11'11") (23'2") (11'1")
11915 3755 2.4
(39'1") (12'4") (7'10")
11885 3810 2.9
(39'0") (12'6") (9'6")
4020 5026 1455 3660 2995 3400 706 2870 600 3470 2500 11835 3675 7.06 3.4
PC450-6**
(13'2") (16'6") (4'9") (12') (9'10") (11'2") (2'4") (9'5") (24") (11'5") (8'2") (38'10") (12'1") (23'2") (13'1")
11850 3835 4.0
(38'11") (12'7") (13'1")
11685 4425 4.8
(38'4") (14'6") (15'9")
11915 3755 2.4
(29'1") (12'4") (7'10")
11885 3810 2.9
(39'0") (12'6") (9'6")
4350 5356 1455 3660 2995 3400 706 2870 700 3570 2500 11835 3675 7.06 4.0
PC450LC-6**
(14'3") (17'7") (4'9") (12') (9'10") (11'2") (2'4") (9'5") (28") (11'9") (8'2") (38'10") (12'7") (23'2") (13'1")
11850 3835 4.0
(38'11") (12'7") (13'1")
11685 4425 4.8
(38'4") (14'6") (15'9")
11390 4500 6.6 2.9
(39'2") (14'9") (21'8") (9'6")
12440 4280 7.3 3.5
(40'10") (14'1") (23'11") (11'6")
4250 5340 1365 3675 3195 3310 780 3300 600 3900 2690 12810 4300 3.5
PC600-6 (13'11") (17'6") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (23.6") (12'10") (8'10") (42'0") (14'1") (11'6")
12730 4655 7.66 4.3
(41'9") (15'3") (25'2") (14'1")
12435 5235 5.2
(40'10") (17'2") (17'1")
11390 4500 6.6 2.9
(39'2") (14'9") (21'8") (9'6")
12440 4280 7.3 3.5
(40'10") (14'1") (23'11") (11'6")
4600 5690 1365 3675 3195 3310 780 3300 600 3900 2690 12810 4300 3.5
PC600LC-6
(15'1") (18'8") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (23.6") (12'10") (8'10") (42'0") (14'1") (11'6")
12730 4655 7.66 4.3
(41'9") (15'3") (25'2") (14'1")
12435 5235 5.2
(40'10") (17'2") (17'1")
2.9
4600 5690 1365 3675 3195 3310 780 3300 600 3900 2960 7.66 (9'6")
PC600LC-6*
(15'1") (18'8") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (23.6") (8'10") (8'10") 12810 4300 (25'2") 3.5
(42'0") (14'1") (11'6")
PC600-6 4250 5340 1365 3675 3195 3310 780 3300 600 3900 2690 12440 4280 7.3 3.5
QUARRY* (13'11") (17'6") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (23.6") (12'10") (8'10") (40'10") (14'1") (23'11") (11'6")
4250 5340 1365 3675 3195 3310 780 3300 600 3900 2690 11390 4500 6.6 2.9
PC600SE-6
(13'11") (17'6") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (23.6") (12'10") (8'10") (39'2") (14'9") (21'8") (9'6")
12810 4300 3.5
(4'2") (14'1") (11'6")
4600 5690 1365 3675 3195 3310 780 3300 750 4050 2690 12730 4655 7.66 4.2
PC600LC-6***
(15'1") (18'8") (4'6") (12'2") (10'6") (10'10") (2'7") (10'10") (29.5") (13'4") (8'10") (41'9") (13'3") (25'2") (14'0")
12435 5235 5.2
(40'10") (17'2") (17'1")
* UK source
** UK source with variable gauge
*** USA source
3A-36
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L
I A
H B
J
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
14305 4660 3.6
(46'11") (15'3") (11'10")
4500 5810 1560 4245 3195 3520 840 3500 610 4110 2965 13955 5970 8.2 4.6
PC750-6
(14'9") (19'1") (5'1") (13'11") (10'6") (11'7") (2'9") (11'6") (24") (12'10") (9'9") (45'9") (19'7") (26'11") (15'1")
13530 6560 5.6
(44'5") (21'6") (18'4")
14100 4785 3.6
(46'3") (15'8") (11'10")
5020 6330 1555 4205 3195 3520 840 3500 810 4310 2965 13955 5970 8.2 4.6
PC750LC-6**
(16'6") (20'9") (5'1") (13'10") (10'6") (11'7") (2'9") (11'6") (32") (14'2") (9'9") (45'9") (19'7") (26'11") (15'11")
13950 6560 5.6
(45'9") (21'6") (18'4")
4500 5810 1560 4245 3195 3620 840 3500 610 4110 2965 13895 4850 8.04 3.6
PC800-6
(14'9") (19'1") (5'1") (13'11") (10'6") (11'11") (2'9") (11'6") (24") (13'6") (9'9") (45'7") (15'11") (26'5") (11'10")
PC750SE-6 4500 5810 1560 4245 3195 3620 840 3500 610 4110 2965 13030 4615 7.1 2.945
PC800SE-6 (14'9") (19'1") (5'1") (13'11") (10'6") (11'11") (2'9") (11'6") (24") (13'6") (9'9") (42'9") (15'2") (23'4") (9'8")
12870 4705 7.1 2.92
4500 5810 1555 4205 3195 3515 840 3500 610 4110 2965 (42'3") (15'5") (23'4") (9'7")
PC750SE-6*
(14'9") (19'1") (5'1") (13'10") (10'6") (11'6") (2'9") (11'6") (24") (13'6") (9'9") 13820 4785 8.2 3.6
(45'4") (15'8") (26'11") (11'10")
16020 6040 3.4
(52'7") (19'10") (11'2")
PC1250-7 4995 6425 1790 4810 3470 4120 990 3900 700 4965*** 3925 16050 6500 9.1 4.5
(16'5") (21'1") (5'10") (15'9") (11'5") (13'6") (3'3") (12'10") (28") (16'3") (12'11") (52'8") (21'4") (29'10") (14'9")
15840 6990 5.7
(52') (22'11") (18'8")
16020 6040 3.4
(52'7") (19'10") (11'2")
5970 7400 1790 4810 3470 4120 990 3900 1000 5265*** 3925 16050 6500 9.1 4.5
PC1250LC-7
(19'7") (24'3") (5'10") (15'9") (11'5") (13'6") (3'3") (12'10") (40") (17'3") (12'11") (52'8") (21'4") (29'10") (14'9")
15840 6040 5.7
(52') (22'11") (18'8")
4995 6425 1790 4810 3470 4120 990 3900 700 4965*** 3925 14790 6265 7.8 3.4
PC1250SP-7
(16'5") (21'1") (5'10") (15'9") (11'5") (13'6") (3'3") (12'10") (28") (16'3") (12'11") (48'6") (20'7") (25'7") (11'2")
17185 6745 8.7 3.9
(56'5") (22'2") (28'7") (12'10")
PC1800-6 5780 7445 2080 6140 5055 6510 730 4600 810 5410 4535 17470 6850 9.1 4.1
(19') (24'5") (6'10") (20'2") (16'7") (21'4") (2'5") (15'1") (32") (17'9") (14'11") (57'4") (22'6") (29'10") (13'5")
19400 7705 11.4 5.0
(63'8") (25'3") (37'5") (16'5")
* UK source
** USA source
*** Include step
3A-37
Dimensions EXCAVATORS
(BACKHOE)
L M
E D
N
F
K
C
G G.L
I A
H B FVBH0251
J
A B C D E F G H I J K L M N Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
4870 6405 1900 4805 4795 6246 777 4250 600 5050 3900 5750 14500 7800 8.0 3.6
PC1400-1 (16'0") (21'0") (6'3") (15'9") (15'9") (20'6") (2'7") (13'11") (24") (16'7") (12'10") (18'10") (47'7") (25'7") (26'3") (11'0")
6000 7905 2710 5950 5910 7950 908 4800 800 5600 5280 6290 16100 9200 8.6 4.0
PC3000-1 (19'8") (25'11") (8'11") (19'6") (19'5") (26'1) (3'0") (15'9") (31.5") (18'4") (17'4") (20'8") (52'10") (30'2") (28'3") (13'1")
6245 8375 2942 6090 7067 8260 980 5350 1200 6550 6027 7650 18000 10000 9.75 4.5
PC4000-6 (20'6") (27'6") (9'8") (20'0") (23'2") (27'1") (3'3") (17'7") (47") (21'7") (19'9") (25'1") (59'1") (32'10") (32'0") (14'9")
6800 9100 3240 7260 7270 8535 970 5800 1350 7150 6340 8000 19500 11000 10.0 5.1
PC5500-6 (22'4") (29'10") (10'8") (23'10") (23'10") (28'0") (3'2") (19') (53") (23'6") (20'10") (26'3") (64'0") (36'1") (32'10") (16'9")
7945 10580 3470 8410 8300 9480 1144 6650 1500 8150 7030 9400 22900 12800 11.5 5.5
PC8000-6 (26'0") (34'9") (11'5") (27'7") (27'3") (31'1") (3'9") (21'10") (59") (26'9") (23'1") (30'10") (75'2") (42'0") (37'9") (18'1")
3A-38
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
D F
C G
FVBH0016
* ISO rating
*** For USA
3A-39
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
* Using power max. function, except PC60-7, PC75R-2, PC95R-2 and EXCEL models, SAE rating
** With one piece boom
*** ISO rating
*4 UK source
*5 For USA
3A-40
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
* Using power max. function, except PC60-7, PC75R-2, PC95R-2 models, SAE rating
** Optional bucket cylinder is required
*** ISO rating
*4 UK source
*5 For USA
*6 USA source
*7 China source
3A-41
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
3A-42
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
3A-43
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
3A-44
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
* SAE rating
3A-45
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
8 ft SKZALLG_23
* DIN rating
3A-46
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
Base machine Boom with arm cylinder Arm with bucket cylinder
B A
Boom cylinder
A B
A
FVBH0173
Model PC120-6
PC60-7 PC100-6 PC128US-2
Item PC120-6 EXCEL
STD 5060 (11,160) 8750 (19,200) 9560 (21,080) 10820 (23,850)
Basic machine Weight L kg (lb) 11850 (26,120)
LC 10460 (23060)
A mm (ft.in) 3835 (12'7") 4400 (14'5") 4740 (15'7") 4740 (15'7")
Boom with arm
B mm (ft.in) 1320 (4'4") 1335 (4'5") 1345 (4'5") 1345 (4'5")
cylinder
Weight kg (lb) 485 (1,070) 860 (1,900) 930 (2,050) 930 (2,050)
Arm size m (ft.in) 1.65 (5'5") 2.06 (6'9") 2.1 (6'11") 2.1 (6'11")
A mm (ft.in) 2185 (7'2") 2725 (8'11") 2845 (9'4") 2845 (9'4")
B mm (ft.in) 485 (1'7") 630 (2'1") 645 (2'1") 645 (2'1")
Weight kg (lb) 255 (560) 450 (990) 510 (1120) 510 (1,120)
Arm size m (ft.in) 2.25 (7'5") 2.36 (7'9") 2.5 (8'2") 2.5 (8'2")
A mm (ft.in) 2800 (9'2") 3055 (10') 3260 (10'8") 3270 (10'9")
B mm (ft.in) 530 (1'19") 590 (1'11") 590 (1'11") 575 (1'11")
Arm with bucket Weight kg (lb) 340 (750) 485 (1,070) 540 (1,190) 540 (1,190)
cylinder and linkage Arm size m (ft.in) 2.86 (9'5") 3.0 (9'10") 3.0 (9'10")
A mm (ft.in) 3545 (11'8") 3750 (12'4") 3750 (12'4")
B mm (ft.in) 595 (1'11") 595 (1'11") 595 (1'11")
Weight kg (lb) 620 (1,370) 660 (1,460) 660 (1,460)
Arm size m (ft.in)
A mm (ft.in)
B mm (ft.in)
Weight kg (lb)
A mm (ft.in) 1425 (4'8") 1615 (5'4") 1625 (5'4") 1625 (5'4")
Boom cylinder
B mm (ft.in) 135 (5.3") 153 (6.0") 166 (6.5") 166 (6.5")
(Total weight)
Weight kg (lb) 95 (210) 98 2 (216 2) 116 2 (256 2) 116 2 (256 2)
Backhoe bucket See bucket arm combination
Model PC130-6
PC130-6* PC158US PC200-7
Item MIGHTY
STD 10360 (22,840) 10000 (22,050) 15720 (34,660)
Basic machine Weight LC kg (lb) 14170 (31,240) 17120 (37,740)
NLC
A mm (ft.in) 4738 (15'7") 4740 (15'7") 4740 (15'7") 5900 (19'4")
Boom with arm
B mm (ft.in) 1310 (4'4") 1345 (4'5") 1345 (4'5") 1530 (5'0")
cylinder
Weight kg (lb) 1060 (2,330) 930 (2,050) 940 (2,070) 1410 (3,130)
Arm size m (ft.in) 2.1 (6'11") 2.5 (8'2") 2.5 (8'2") 1.84 (6'0")
A mm (ft.in) 2860 (9'4") 3260 (10'8") 3270 (10'9") 2775 (9'1")
B mm (ft.in) 635 (2'1") 590 (1'11") 575 (1'11") 875 (2'10")
Weight kg (lb) 440 (970) 640 (1,410) 540 (1,190) 911 (2,010)
Arm size m (ft.in) 2.5 (8'2") 3.0 (9'10") 2.41 (7'11")
A mm (ft.in) 3270 (10'9") 3750 (12'4") 3430 (11'3")
B mm (ft.in) 575 (1'11") 595 (1'11") 890 (2'11")
Arm with bucket Weight kg (lb) 460 (1,020) 660 (1460) 930 (2,050)
cylinder and linkage Arm size m (ft.in) 2.9 (9'6") 2.93 (9'7")
A mm (ft.in) 3770 (12'4") 3925 (12'11")
B mm (ft.in) 640 (2'1") 770 (2'6")
Weight kg (lb) 610 (1,350) 955 (2,110)
Arm size m (ft.in)
A mm (ft.in)
B mm (ft.in)
Weight kg (lb)
A mm (ft.in) 1400 (4'7") 1625 (5'4") 1625 (5'4") 2005 (6'7")
Boom cylinder
B mm (ft.in) 170 (6.7") 166 (6.5") 166 (6'5") 337 (743)**
(Total weight)
Weight kg (lb) 80 2 (176 2) 116 2 (256 2) 116 2 (256 2)
Backhoe bucket See bucket arm combination
* UK source
** With piping
3A-47
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
Base machine Boom with arm cylinder Arm with bucket cylinder
B A
Boom cylinder
A B
A
FVBH0173
Model
PC220-7 PC228US-3 PC240-7 PC300-7
Item
STD 18250 (40,230) 18210 (40,150) 18700 (41,230) 24600 (54,230)
Basic machine Weight LC kg (lb) 19680 (43,390) 19510 (43,010) 19800 (43,650) 25700 (56,660)
NLC 19400 (42,770)
A mm (ft.in) 6045 (19'10") 5875 (19'3") 6040 (19'10") 6715 (22'0")
Boom with arm
B mm (ft.in) 1615 (5'4") 1450 (4'9") 1555 (5'1") 1625 (5'4")
cylinder
Weight kg (lb) 1830 (4,030) 1720 (3,790) 2060 (4,540) 2510 (5,530)
Arm size m (ft.in) 2.0 (6'7") 2.93 (9'7") 2.0 (6'7") 2.22 (7'3")
A mm (ft.in) 3065 (10'1") 3905 (12'10") 3050 (10') 3455 (11'4")
B mm (ft.in) 975 (3'2") 725 (2'5") 920 (3') 1150 (3'9")
Weight kg (lb) 1205 (2,660) 950 (2,090) 1140 (2,510) 1705 (3,760)
Arm size m (ft.in) 2.5 (8'2") 2.5 (8'2") 2.55 (8'4")
A mm (ft.in) 3625 (11'11") 3600 (11'10") 3735 (12'3")
B mm (ft.in) 925 (3'0") 860 (2'10") 1040 (3'5")
Arm with bucket Weight kg (lb) 1235 (2,720) 1020 (2,250) 1650 (3,640)
cylinder and linkage Arm size m (ft.in) 3.05 (10'0") 3.05 (10') 3.2 (10'6")
A mm (ft.in) 4135 (13'7") 4105 (13'6") 4380 (14'4")
B mm (ft.in) 815 (2'8") 770 (2'6") 955 (3'2")
Weight kg (lb) 1215 (2,680) 1125 (2,480) 1700 (3,750)
Arm size m (ft.in) 3.5 (11'6") 4.02 (13'2")
A mm (ft.in) 4560 (15') 5205 (17'1")
B mm (ft.in) 790 (2'7") 945 (3'1")
Weight kg (lb) 1240 (2,730) 1980 (4,365)
A mm (ft.in) 2015 (6'7") 2005 (6'7") 2040 (6'8") 2215 (7'3")
Boom cylinder
B mm (ft.in) 340 (1'1")** 250 (9.8") 280 (11") 405 (1'4")**
(Total weight)
Weight kg (lb) 200 2 (440 2) 180 2 (410 2) 253 2 (560 2) 225 2 (496 2)
Backhoe bucket See bucket arm combination
Model PC400-6
PC350-7 PC380-6 PC400-6
Item EXCEL
STD 25550 (56,330) 33100 (72,970) 33100 (72,970)
Basic machine Weight LC kg (lb) 26650 (58,750) 30500 (67,240) 34300 (75,620) 33850 (74,630)
NLC
A mm (ft.in) 6715 (22'0") 6680 (21'11") 7290 (23'11") 7290 (23'11")
Boom with arm
B mm (ft.in) 1625 (5'4") 1578 (5'1") 1695 (5'7") 1695 (5'7")
cylinder
Weight kg (lb) 2510 (5,530) 2980 (6,280) 4000 (8,820) 4000 (8,820)
Arm size m (ft.in) 3.2 (10'6") 2.2 (7'3") 2.4 (7'10") 2.4 (7'10")
A mm (ft.in) 4380 (14'4") 3359 (11') 3705 (12'2") 3705 (12'2")
B mm (ft.in) 990 (3'3") 965 (3'2") 1080 (3'7") 1080 (3'7")
Weight kg (lb) 1805 (3,980) 1590 (3,510) 2030 (4,480) 2030 (4,480)
Arm size m (ft.in) 2.55 (8'4") 2.9 (9'6") 2.9 (9'6")
A mm (ft.in) 3656 (12') 4215 (13'10") 4215 (13'10")
B mm (ft.in) 927 (3') 995 (3'4") 995 (3'4")
Weight kg (lb) 1610 (3,550) 2150 (4,740) 2150 (4,740)
Arm size m (ft.in) 3.185 (10'5") 3.38 (11'1") 3.38 (11'1")
Arm with bucket A mm (ft.in) 4302 (14'1") 4615 (15'2") 4615 (15'2")
cylinder and linkage B mm (ft.in) 888 (2'11") 975 (3'2") 975 (3'2")
Weight kg (lb) 1725 (3,800) 2200 (4,850) 2200 (4,850)
Arm size m (ft.in) 4.02 (13'2") 4.0 (13'1") 4.0 (13'1")
A mm (ft.in) 5119 (16'10") 5235 (17'2") 5235 (17'2")
B mm (ft.in) 902 (3') 965 (3'2") 965 (3'2")
Weight kg (lb) 2020 (4,450) 2440 (5,380) 2440 (5,380)
m (ft.in) 4.8 (15'9") 4.8 (15'9")
A
mm (ft.in) 6040 (19'10") 6040 (19'10")
B
mm (ft.in) 1045 (3'5") 1045 (3'5")
Weight
kg (lb) 2600 (5,730) 2600 (5,730)
A mm (ft.in) 2215 (7'3") 2300 (7'7") 2445 (8'1") 2445 (8'1")
Boom cylinder
B mm (ft.in) 405 (1'4") 209 (8.2") 225 (8.9") 225 (8.9")
(Total weight)
Weight kg (lb) 225 x 2 (496 x 2) 280 x 2 (620 x 2) 400 x 2 (880 x 2) 400 2 (880 2)
Backhoe bucket See bucket arm combination
** With piping
3A-48
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
Base machine Boom with arm cylinder Arm with bucket cylinder
B A
Boom cylinder
A B
A
FVBH0173
Model PC450-6
PC400HD-6 PC450-6*
Item MIGHTY
STD 35975 (79,310) 35060 (77,290) 33200 (73,210)
Basic machine Weight LC kg (lb) 36200 (79,810) 34400 (75,850)
NLC
A mm (ft.in) 7290 (23'11") 7290 (23'11") 7290 (23'11")
Boom with arm
B mm (ft.in) 1695 (5'7") 1615 (5'4") 1695 (5'7")
cylinder
Weight kg (lb) 4000 (8,820) 3810 (8,400) 4200 (9,260)
Arm size m (ft.in) 2.4 (7'10") 2.4 (7'10") 3.38 (11'1")
A mm (ft.in) 3705 (12'2") 3702 (12'2") 4705 (15'5")
B mm (ft.in) 1080 (3'7") 1078 (3'6") 1055 (3'6")
Weight kg (lb) 2030 (4,480) 2030 (4,480) 2400 (5,290)
Arm size m (ft.in) 2.9 (9'6") 2.9 (9'6")
A mm (ft.in) 4215 (13'10") 4210 (13'10")
B mm (ft.in) 995 (3'4") 994 (3'4")
Weight kg (lb) 2150 (4,740) 2140 (4,720)
Arm size m (ft.in) 3.38 (11'1") 3.38 (11'1")
Arm with bucket A mm (ft.in) 4615 (15'2") 4600 (15'1")
cylinder and linkage B mm (ft.in) 975 (3'3") 975 (3'2")
Weight kg (lb) 2200 (4,850) 2120 (4,670)
Arm size m (ft.in) 4.0 (13'1") 4.0 (13'1")
A mm (ft.in) 5235 (17'2") 5234 (17'2")
B mm (ft.in) 965 (3'2") 963 (3'2")
Weight kg (lb) 2440 (5,380) 2460 (5,420)
Arm size m (ft.in) 4.8 (15'9") 4.8 (15'9")
A mm (ft.in) 6040 (19'10") 6036 (19'10")
B mm (ft.in) 1045 (3'5") 1041 (3'5")
Weight kg (lb) 2600 (5,730) 2580 (5,690)
A mm (ft.in) 2445 (8'1") 2445 (8'1") 2445 (8'1")
Boom cylinder
B mm (ft.in) 225 (8.9") 237 (9.3") 225 (8.9")
(Total weight)
Weight kg (lb) 400 2 (880 2) 390 2 (860 2) 400 2 (880 2)
Backhoe bucket See bucket arm combination
* UK source
3A-49
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC600 / 600LC / 600SE-6
(1) Work Equipment Assembly
Overall length mm (ft. in) 4870 (16'0") 4870 (16'0") 4870 (16'0") 4870 (16'0") 4230 (13'11")
Overall width mm (ft. in) 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7")
Arm
Overall height mm (ft. in) 1210 (4'0") 1240 (4'1") 1210 (4'0") 1210 (4'0") 1440 (4'9")
Weight ton (U.S. ton) 3.2 (4.2) 3.3 (4.3) 3.2 (4'2") 3.2 (4.2) 3.4 (3.7)
Overall length mm (ft. in) 2040 (6'8") 2040 (6'8") 2040 (6'8") 2040 (6'8") 2040 (6'8")
Overall width mm (ft. in) 1790 (5'10") 1840 (6'0") 1700 (5'10") 1790 (5'10") 2000 (6'7")
Bucket
Overall height mm (ft. in) 1870 (6'2") 1880 (6'2") 1870 (6'2") 1870 (6'2") 1880 (6'2")
Weight ton (U.S. ton) 2.4 (3.1) 3.0 (3.3) 2.4 (3.1) 2.4 (3.1) 3.0 (3.3)
Overall length mm (ft. in) 3110 (10'2") 3110 (10'2") 3110 (10'2") 3110 (10'2") 3110 (10'2")
Cylinder
Weight ton (U.S. ton) 1.8 (2.0) 1.8 (2.0) 1.8 (2.0) 1.8 (2.0) 1.8 (2.0)
Overall length mm (ft. in) 6170 (20'3") 6170 (20'3") 6345 (20'10") 6345 (20'10") 6170 (20'3")
Overall width mm (ft. in) 3195 (10'6") 3195 (10'6") 3345 (11'0") 3345 (11'0") 3195 (10'6")
(2) Base Machine
Overall height mm (ft. in) 3310 (10'10") 3310 (10'10") 3310 (10'10") 3310 (10'10") 3310 (10'10")
Weight ton (U.S. ton) 32.1 (35.4) 33.3 (36.7) 34.0 (37.5) 35.0 (38.6) 32.1 (35.4)
A:Overall length mm (ft. in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
(3) Others B:Overall width mm (ft. in) 680 (2'3") 680 (2'3") 680 (2'3") 680 (2'3") 680 (2'3")
(Counterweight) C:Overall height mm (ft. in) 1320 (4'4") 1320 (4'4") 1320 (4'4") 1320 (4'4") 1320 (4'4")
Weight ton (U.S. ton) 10.75 (11.8) 10.75 (11.8) 10.75 (11.8) 11.7 (12.9) 10.75 (11.8)
3A-50
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC750/800-6
FDP01004
FDP01003
FDP01002
5970 (19'7")
2750 (9')
FVPM2406
FDP01006
3640
93 31
0 0 95
OPG 79 6840
FVPM2407
1530
1460
03
15
50kg
16
00
70
51
51 0
10 0 90
18 33
FVPM2408
PC750/750LC/750SE-6
Four-part structure
Dimension
Weight ton
Length mm (ft.in.) Width mm (ft.in.) Height mm (ft.in.)
(U.S. ton)
Work equipment
STD/LC 8505 (27'11") 1500 (4'11") 2610 (8'7") 7.4 (8.2)
Boom
SE 7405 (24'4") 1500 (4'11") 2465 (8'1") 6.9 (7.6)
STD/LC 5105 (16'9") 750 (2'6") 1325 (4'4") 4.0 (4.4)
Arm
1 SE 4075 (13'4") 755 (2'6") 1695 (5'7") 4.9 (5.4)
Backhoe
STD/LC 2365 (7'9") 1845 (6'1") 1850 (6'1") 3.0 (3.3)
Bucket
SE 2200 (7'2") 2105 (6'11") 1950 (6'5") 3.4 (3.7)
STD/LC 3580 (11'9") 2.5 (2.8)
Cylinder
SE 3235 (10'7") 2.6 (2.9)
2 Upper structure 5970 (19'7") 3195 (10'6") 2745 (9') 24.8 (27.3)
STD/SE 5810 (19'1") 1305 (4'3") 1445 (4'9") 20.7 (22.8)
3 Undercarriage
LC 6330 (20'9") 1355 (4'5") 1445 (4'9") 25.9 (28.5)
4 Others (counterweight, etc.) 9.2 (10.1)
Three-part structure
Dimension
Weight ton
Length mm (ft.in.) Width mm (ft.in.) Height mm (ft.in.)
(U.S. ton)
1 Work equipment The same as that of four-parts structure
STD/SE 6840 (22'5") 3390 (11'1") 3640 (11'11") 46.3 (51.0)
2 Upper structure
LC 7250 (23'9") 3770 (12'4") 3640 (11'11") 50.4 (55.5)
3 Others (counterweight, etc.) The same as that of four-parts structure
3A-51
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC800/800SE-6
Four-part structure
Dimension
Weight ton
Length mm (ft.in.) Width mm (ft.in.) Height mm (ft.in.)
(U.S. ton)
Work equipment
STD 8345 (27'5") 1500 (4'11") 2600 (8'6") 7.7 (8.5)
Boom
SE 7405 (24'4") 1500 (4'11") 2465 (8'1") 6.9 (7.6)
STD 4800 (15'9") 750 (2'6") 1410 (4'8") 4.5 (5.0)
1 Arm
Backhoe SE 4075 (13'4") 755 (2'6") 1695 (5'7") 4.9 (5.4)
STD 2390 (7'10") 1870 (6'2") 1850 (6'1") 3.5 (3.9)
Bucket
SE 2200 (7'2") 2255 (7'5") 1950 (6'5") 3.9 (4.3)
Cylinder STD 3235 (10'7") 2.6 (2.9)
2 Upper structure 5970 (19'6") 3195 (10'6") 2750 (9') 24.9 (27.4)
3 Undercarriage 5810 (19'1") 1305 (4'3") 1445 (4'9") 21.2 (23.4)
4 Others (counterweight, etc.) 12.2 (13.4)
Three-part structure
Dimension
Weight ton
Length mm (ft.in.) Width mm (ft.in.) Height mm (ft.in.)
(U.S. ton)
1 Work equipment The same as that of four-parts structure
2 Upper structure 6840 (22'5") 3390 (11'1") 3640 (11'11") 46.9 (51.9)
3 Other (counterweight, etc.) The same as that of four-parts structure
3A-52
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1250/1250SP/1250LC-7
Boom
2510(8'3")
PC1250: 11.0t 9475x2894x1474
(12.1USt) (31'1")x(9'6")x(4'10")
PC1250SP: 10.9t 8170x3095x1474 Width:3490 (11'9")
(12.0USt) (26'10")x(10'2")x(4'10") FVBH0174 Weight:23.9t (26.3USt)
FVBH0178
Arm
3. Undercarriage
6425(21'2") 1222(4')
PC1250:5.9t 4895x1626x890 LC:1295(4'3")
(6.5USt) (16'1")x(5'4")x(2'11") LC:7400(24'3")
PC1250SP:6.3t 4914x1683x890
LC:1640(5'5")
(6.9USt) (16'1")x(5'6")x(2'11") FVBH0175
1585(5'2")
Bucket
Weight
PC1250:30.0t (33.1USt)
15.0t x2(16.5x2USt)
PC1250:4.3t 2700x2100x2050 PC1250SP:30.9t(34.1USt)*
(4.7USt) (8'10")x(6'11")x(6'9")
15.45t x2(17.0x2USt)
PC1250SP:5.9t 2527x2420x2520
(6.5USt) (8'3")x(7'11")x(8'3") FVBH0176 PC1250LC:38t (41.9USt)
19t x2(20.9x2USt)
FVBH0179
Arm cylinder * With full length roller guard
1.5t (1.7USt)
Boom cylinder
2.4t [1.2tx2]
(2.64USt) (1.32UStx2)
FVBH0177
4. Others
27.7t (30.5 US.ton)
2850(9'4") 600(2')
1260(4'2")
400
(1'4")
2850(9'4")
Width:3540 (11'7")
Weight:9.3t (10.3USt)
845
(2'9")
880(2'11") 620
3470(11'5") (2')
3155(10'4")
1810
(5'11")
1830 1760(5'9")
(6')
100(3.9")
18.0t(19.8USt)
FVBH0180
3A-53
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1800-6
Dimension Length Width Height Weight
Unit name mm (ft.in.) mm (ft.in.) mm (ft.in.) ton (U.S. ton)
1. Boom
FVBH0202
2. Arm
FVBH0203
3. Bucket
FVBH0204
4. Upper structure
5. Center frame
6. Left Undercarriage
7. Right Undercarriage
8. Operator cab
9. Counterweight
7.45 (8.2)
3A-54
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1400-1
Component Dimensions and Weights PC1400-1
shoe width mm (in) 600 (24")
length mm (ft.in) 6450 (21'2")
Undercarriage width mm (ft.in) 5150 (16'11")
height mm (ft.in) 1850 (6'1")
weight t (U.S. ton) 43 (47.9)
shoe width, option mm (in) 800 (31.5")
length mm (ft.in) 6450 (21'2")
Undercarriage, Option width mm (ft.in) 5150 (16'11")
height mm (ft.in) 1850 (6'1")
weight t (U.S. ton) 46 (50.7)
counterweight, pieces 1
length mm (ft.in) 4000 (13'1")
Counterweight width mm (ft.in) 2000 (6'7")
height mm (ft.in) 900 (2'11")
weight t (U.S. ton) 24 (26.5)
length mm (ft.in) 6460 (21'2")
width mm (ft.in) 4800 (15'9")
Upper structure
height mm (ft.in) 3200 (10'6")
weight t (U.S. ton) 31 (34.2)
length mm (ft.in) 2800 (9'2")
width mm (ft.in) 2800 (9'2")
Case with cab
height mm (ft.in) 3200 (10'6")
weight t (U.S. ton) 1.25 (1.38)
length mm (ft.in) 2910 (9'7")
width mm (ft.in) 1730 (5'8")
Cab Guard
height mm (ft.in) 2340 (7'8")
weight t (U.S. ton) 1.1 (1.21)
with arm cylinder yes two
length mm (ft.in) 8600 (28'3")
Backhoe Boom 8 m (26'3") width mm (ft.in) 1500 (4'11")
height mm (ft.in) 3400 (11'2")
weight t (U.S. ton) 13 (14.3)
with kinematics yes
length mm (ft.in) 4900 (16'1")
Backhoe Arm 3.6 m (11'10") width mm (ft.in) 1300 (4'3")
height mm (ft.in) 1800 (5'11")
weight t (U.S. ton) 8.5 (9.4)
capacity SAE m3 (cu.yd) 9.5 (12.4)
length mm (ft.in) 2800 (9'2")
Backhoe Bucket width mm (ft.in) 2750 (9'0")
height mm (ft.in) 2660 (8'9")
weight t (U.S. ton) 8.4 (9.3)
no. of container 1
length mm (ft.in) 6000 (19'8")
Additional Case
width mm (ft.in) 2400 (7'10")
Backhoe
height mm (ft.in) 2000 (6''7")
weight t (U.S. ton) 1.5 (1.65)
no. of container 1
length mm (ft.in) 4500 (14'9")
Additional Case
width mm (ft.in) 1100 (3'7")
Backhoe
height mm (ft.in) 1000 (3'3")
weight t (U.S. ton) 4.2 (4.6)
3A-55
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC3000-1
Component Dimensions and Weights PC3000-1
pieces no. 2
shoe width mm (in) 800 (31.5")
length mm (ft.in) 7860 (25'9")
Undercarriage
width mm (ft.in) 1640 (5'5")
height mm (ft.in) 2160 (7'1")
weight t (U.S. ton) 31.9 (35.2)
pieces no. 2
shoe width, option mm (in) 1000 (3'3")
length mm (ft.in) 7860 (25'9")
Undercarriage, Option
width mm (ft.in) 1840 (6'0")
height mm (ft.in) 2160 (7'1")
weight t (U.S. ton) 34 (37.5)
length mm (ft.in) 3520 (11'7")
width mm (ft.in) 3940 (12'11")
Carbody Centre
height mm (ft.in) 2180 (7'2")
weight t (U.S. ton) 16.6 (18.3)
counterweight, pieces 1
length mm (ft.in) 5050 (16'7")
Counterweight width mm (ft.in) 800 (2'7")
height mm (ft.in) 2860 (9'5")
weight t (U.S. ton) 27.7 (30.5)
length mm (ft.in) 7945 (26'1")
width mm (ft.in) 5400 (17'9")
Upper structure
height mm (ft.in) 3700 (12'2")
weight t (U.S. ton) 61.5 (67.8)
length mm (ft.in) 2250 (7'5")
width mm (ft.in) 1650 (5'5")
Fuel-tank
height mm (ft.in) 2800 (9'2")
weight t (U.S. ton) 2.25 (2.48)
length mm (ft.in) 2140 (7'0")
width mm (ft.in) 1950 (6'5")
Cab Base
height mm (ft.in) 2650 (8'8")
weight t (U.S. ton) 3.1(3.4)
length mm (ft.in) 2800 (9'2")
width mm (ft.in) 2100 (6'11")
Case with cab
height mm (ft.in) 3200 (10'6")
weight t (U.S. ton) 2.25 (2.48)
length mm (ft.in) 2810 (9'3")
width mm (ft.in) 1920 (6'4")
Cab Guard
height mm (ft.in) 2450 (8'0")
weight t (U.S. ton) 1.4 (1.54)
with arm cylinder mm (ft.in) yes two
length mm (ft.in) ~ 9200 (30'2")
Backhoe Boom width mm (ft.in) ~ 2600 (8'6")
height t (U.S. ton) ~ 4000 (13'1")
weight mm (ft.in) 27.3 (30.1)
with kinematics yes
length mm (ft.in) ~ 5700 (18'8")
Backhoe Arm width mm (ft.in) ~ 1700 (5'7")
height mm (ft.in) ~ 2400 (7'10")
weight t (U.S. ton) 15.5 (17.1)
capacity SAE m3 (cu.yd) 15 (19.6)
length mm (ft.in) ~ 3500 (11'6")
Backhoe Bucket width mm (ft.in) ~ 3400 (11'2")
height mm (ft.in) ~ 2900 (9'6")
weight t (U.S. ton) 16.5 (18.2)
3A-56
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC3000-1
Component Dimensions and Weights PC3000-1
no. of container 1
length mm (ft.in) 5770 (18'11")
Additional Case
width mm (ft.in) 2390 (7'10")
Backhoe
height mm (ft.in) 1760 (5'9")
weight t (U.S. ton) 4 (4.4)
no. of container 1
length mm (ft.in) 4690 (15'5")
Additional Case
width mm (ft.in) 1090 (3'7")
Backhoe
height mm (ft.in) 1060 (3'6")
weight t (U.S. ton) 7 (7.72)
no. of container 1
length mm (ft.in) 4180 (13'9")
Additional Case
width mm (ft.in) 950 (3'1")
Backhoe
height mm (ft.in) 970 (3'2")
weight t (U.S. ton) 5.3 (5.84)
3A-57
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC4000-6
Component Dimensions and Weights PC4000-6
pieces 2
shoe width mm (in) 1200 (47")
length mm (ft.in) 8450 (27'9")
Undercarriage
width mm (ft.in) 2700 (10'3")
height mm (ft.in) 2420 (7'11")
weight t (U.S. ton) 52 (57.3)
pieces 2
shoe width, option mm (in) 1500 (59")
length mm (ft.in) 8450 (27'9")
Undercarriage, Option
width mm (ft.in) 2850 (9'4")
height mm (ft.in) 2420 (7'11")
weight t (U.S. ton) 54.5 (60.1)
length mm (ft.in) 4420 (14'6")
width mm (ft.in) 4130 (13'7")
Carbody Centre
height mm (ft.in) 2350 (7'9")
weight t (U.S. ton) 29 (32)
length mm (ft.in) 8420 (27'8")
width mm (ft.in) 4440 (14'7")
Upper structure Main Frame
height mm (ft.in) 3900 (12'10")
weight t (U.S. ton) 57.5 (63.4)
counterweight, pieces 1
length mm (ft.in) 6150 (20'2")
Counterweight width mm (ft.in) 3420 (11'3")
height mm (ft.in) 700 (2'4")
weight t (U.S. ton) 33.8 (34.6)
length mm (ft.in) 6500 (21'4")
Main Machinery House width mm (ft.in) 3000 (9'10")
Without Filters and Railings height mm (ft.in) 3300 (10'10")
weight t (U.S. ton) 30.1 (33.2)
length mm (ft.in) 2400 (7'10")
width mm (ft.in) 2100 (6'11")
Fuel-tank
height mm (ft.in) 3230 (10'7")
weight t (U.S. ton) 3.6 (4.0)
length mm (ft.in) 2400 (7'10")
width mm (ft.in) 1200 (3'11")
Hydraulic-tank
height mm (ft.in) 3300 (10'10")
weight t (U.S. ton) 3.2 (3.5)
length mm (ft.in) 4400 (14'5")
width mm (ft.in) 2250 (7'5")
Case with Oil Cooler
height mm (ft.in) 2700 (8'10")
weight t (U.S. ton) 3.4 (3.7)
length mm (ft.in) 2280 (7'6")
width mm (ft.in) 2100 (6'11")
Cab Base
height mm (ft.in) 3000 (9'10")
weight t (U.S. ton) 3.4 (11'2")
length mm (ft.in) 4000 (13'1")
width mm (ft.in) 3500 (11'6")
Cab with intermediate base
height mm (ft.in) 3000 (9'10")
weight t (U.S. ton) 5 (5.5)
with arm cylinder mm (ft.in) no
length mm (ft.in) 10500 (34'5")
Backhoe Boom 9.75 m (32'0") width mm (ft.in) 2600 (8'6")
height t (U.S. ton) 3700 (12'2")
weight mm (ft.in) 39.1 (43.1)
with kinematics yes
length mm (ft.in) 6300 (20'8")
Backhoe Arm 4.5 m (14'9") width mm (ft.in) 1250 (4'1")
height mm (ft.in) 2400 (7'10")
weight t (U.S. ton) 19.8 (21.8)
3A-58
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC4000-6
Component Dimensions and Weights PC4000-6
capacity SAE m3 (cu.yd) 22 (28.8)
length mm (ft.in) 4000 (13'1")
Backhoe Bucket width mm (ft.in) 3600 (11'10")
height mm (ft.in) 3650 (12"0")
weight t (U.S. ton) 22.1 (24.4)
no. of container 1
length mm (ft.in) 5800 (19'0")
Additional Case
width mm (ft.in) 2390 (7'10")
Backhoe
height mm (ft.in) 1700 (5'7")
weight t (U.S. ton) 4
no. of container 1
length mm (ft.in) 4300 (14'1")
Additional Case
width mm (ft.in) 1100 (3'7")
Backhoe
height mm (ft.in) 1050 (3'5")
weight t (U.S. ton) 6 (6.6)
no. of container 1
length mm (ft.in) 5100 (16'9")
Additional Case
width mm (ft.in) 1100 (3'7")
Backhoe
height mm (ft.in) 1050 (3'5")
weight t (U.S. ton) 9 (9.9)
3A-59
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC5500-6
Dimensions Length Width Height Weight
Unit Name mm (ft.in) mm (ft.in) mm (ft.in) ton (us ton)
Stick (5,1 m) with 2 Bucket Cylinders, Linkage 7150 2050 2700 31.9
and Rod (23'6") (6'9") (8'10") (35.2)
3A-60
Shoe Selection EXCAVATORS
(BACKHOE)
Applications of different shoes in accordance with soil characteristics and working conditions.
Applicable soil and
Type of shoe Advantages Disadvantages Remarks
work
1 Tripple grouser shoe The three grousers have This shoe does not readily
the same height, hence bite into the ground, so the
turning ability is good. traction force is low.
Good riding comfort is
obtained as compared with
a single grouser shoe.
Rotating resistance is low.
Hard ground Because three beams are
Suitable for both soft used, resistance to
Double grouser shoe bending is high.
and hard ground
3 Road liner (rubber) The surface of the shoe in Use in the following places
contact with the ground is will shorten the cutting life
made of rubber, so the of the rubber.
machine can travel on (1) Rocky ground
paved roads without (2) Cold areas
damaging the road (below -25C)
surface. (3) Hot areas
Prevents noise when (above 65C)
machine is traveling. Because there are no
Rubber pad Paved road grouser, this shoe does not
Indoor work bite into the ground.
3A-61
Shoe Application EXCAVATORS
(BACKHOE)
3A-62
Shoe Application EXCAVATORS
(BACKHOE)
3A-63
Shoe Application EXCAVATORS
(BACKHOE)
Classification of the applications:
Classification Applicable terrain Limitations
Rocky terrain, river 1. Use low gear for traveling over harsh terrain with various obstacles such as rolling
A
banks, & general terrain stones and fallen trees.
1. Not applicable for traveling over harsh terrain with rolling stones and fallen trees.
B General or soft terrain 2. Travel in high gear only on flat ground ; use half speed in low gear for going over
the obstacles, if they are unavoidable.
1. Applicable only when "A" & "B" sink.
Extremely soft terrain 2. Not applicable for traveling over harsh terrain with rolling stones and fallen trees.
C
(swamps) 3. Travel in high gear only on flat terrain ; use half speed in low gear for going over
the obstacles if they are unavoidable.
1. Rubber pad shoes must be used mainly in machine operation on paved road
surfaces. If used on unpaved surfaces, shoe durability will be badly deteriorated
due to rubber cracks, cutouts etc.
The following operations must be avoided.
(a) Work on broken concrete, gravel, etc.
(b) Work on sharp projections like reinforcing iron rods, glass, etc.
(c) Riding on concrete road shoulder, operation on bedrock and in rivers with
D Paved road
abundance of stones, pebbles, etc.
2. In operation on roads covered with water, ice, snow, gravel etc. be careful to avoid
the shoes slipping, especially in carrying or unloading operation of a machine on
or from a truck.
3. In operation at high temperature (65C or higher) or at low temp. (-25C or lower),
the rubber will be liable to damage because of the changes in the physical
properties.
NOTE: Select the narrowest possible shoes, depending on the flotation and ground pressure of the
machines. If the shoe is too wide, the load on the track shoe increases and results in bends in the
shoes, cracks in the links, breakage and slipping out of the pins and loosening of the bolts.
3A-64
Ground Pressure EXCAVATORS
(BACKHOE)
Definition: Ground pressure = machine operating weight / total ground contact area
where ; total ground contact area = (L + 0.35H) shoe width 2
H
H = Track height
L L = Distance between centers of sprocket and front idler
FVBH0003
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on soft
and swampy terrain where the standard excavator with standard shoe is not usable due to sinkage of
the tracks. If such shoes are used in swampy fields with stones, stumps and roots, bending of the
shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other damage may
result. Therefore, the job site must be studied carefully, to provide the customer with correct
instructions and advice.
3A-65
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-66
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-67
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-68
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC) wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-69
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC) wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-70
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-71
Ground Pressure EXCAVATORS
(BACKHOE)
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3A-72
Bucket Capacity Definition EXCAVATORS
(BACKHOE)
BUCKET CAPACITY RATING
Bucket capacity is measured in terms of either struck or heaped capacity. Generally, the heaped capacity
description is more frequently used.
Komatsu Ltd. rates the excavator bucket capacity based on ISO and other standards such as JIS, PCSA and
SAE (JIS and SAE are based on ISO.)
1) Struck Capacity
The struck capacity is the volume capacity of
the bucket after it has been struck at the strike
plane. The strike plane passes through the top Ve Struck plane
3A-73
Bucket Selection EXCAVATORS
(BACKHOE)
Bucket selection for excavator
Komatsu offers various kinds and sizes of buckets so that the users are able to select the optimum bucket for
the type of soil and the work to be performed. This enables the work to be accomplished most efficiently.
The following is a guide for selecting the optimum bucket.
2. Selection of size
The following two points 1) and 2) should be considered altogether.
1) From the machine stability (For backhoe type)
If the bucket size (capacity) is too big, it will worsen the stability of the machine, resulting in danger of
tipping over or rolling over.
The concept of the bucket selection from the point of machine stability is from the following.
Putting A as the maximum allowable load from over-side (sideways) machine stability and B as the
bucket working load (bucket weight + carrying material weight), the size of the bucket should be
selected so as to be;
BA
From Figure 1,
A = W1 + (L0 / L) W2 = W1 + W2 Approximately
where, W1 : The weight of the empty bucket shown in the table of Lift Capacity. The value of the
weight is shown in the tables of "Bucket and Arm Combination".
W2 : The smallest lift capacity in the table of Lift Capacity at respective boom length and
arm length (The lift capacity differs by the arm vertical position)
From Figure 2,
B = W3 + W 4
where, W3 : The bucket weight used for the job
W4 : The weight of carried material
(= rated bucket capacity specific gravity of carried material)
W4
W1
W3
W2
L L
L0
FVBH0239 FVBH0240
Figure 1 Figure 2
3A-74
Bucket Selection EXCAVATORS
(BACKHOE)
2) From the bucket penetration force
When selecting a bucket, check whether the penetration force of the bucket is sufficient for the soil at
the job site. The bucket penetration force is the digging force per unit width of the bucket.
Bucket penetration force = Digging force / Bucket width
The larger the digging force per unit width of the bucket is, the larger the bucket penetration force
(penetration performance) is.
The digging force is generated by the bucket hydraulic cylinder(s) and the boom hydraulic cylinder(s).
In addition to the digging force, the width of the bucket and the tip radius (dimension from the bucket
hinge center to the forefront of the bucket teeth) affects the bucket penetration force.
(1)Digging force
Rated digging force of the bucket is the force at the foremost digging point of the bucket. This
digging force is generated by the bucket hydraulic cylinder and the arm hydraulic cylinder. The
former is called the "Bucket digging force" and the latter is called the "Arm crowd force".
These digging forces are calculated by applying working relief hydraulic pressure to the cylinder(s).
The weight of components and friction are to be excluded in the calculation. The definition of the
digging forces are based on SAE J1179 and are as follows.
a. Bucket digging force
The rated bucket digging force (V, in the
top figure) is the force generated by the
bucket cylinder(s) and the tangent to the Bucket cylinder
arc of radius C. The bucket should be
positioned to obtain the maximum output
moment from the bucket cylinder(s) and V V
the connecting linkage. C C
b. Arm crowd force 90
90
The rated arm crowd force (W, in the
bottom figure) is the force generated by
the arm cylinder(s) and the tangent to the Arm cylinder
arc of the radius B. The arm should be 90
positioned to obtain the maximum output
moment from the arm cylinder(s) and the 90
bucket, positioned as mentioned above.
(2)Bucket width
The wider the bucket is, the worse the
bucket penetration is. Generally speaking, a B B
wide bucket is recommended for excavating
soil that can be broken easily. A narrow
bucket is better suited for work on hard soil. W
The width of the bucket must be limited also W
from the point of durability of the bucket, 90 90
arm, boom and their hinge pins and
bushings,. If the width is too great, it will FVBH0018
cause excessive twist on the relevant parts,
resulting in premature breakage or wear.
(3)Tip radius
The tip radius also affects the digging force
of the bucket. If the bucket cylinder is
provided with the same pushing force, the
bucket with the shorter tip radius is better Narrower Wider
able to dig hard soil than the bucket with the Bucket width
longer tip radius.
The bucket width and the tip radius should Shorter Longer
be selected with the combination of the
digging forces mentioned above in order to
have appropriate bucket penetration.
Tip radius
When you need the values for allowable FVBH0045
bucket width and bucket penetration force
for each model, you can request and get the
figures from Komatsu through your
distributor.
3A-75
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
This shows the bucket sizes currently available for respective models produced in various Komatsu plants, in
relation with the arm length.
All allowable sizes from the concept of machine stability in "BUCKET SELECTION" are not shown, but it is
possible for Komatsu plants to develop the various size buckets according to the theory of "BUCKET
SELECTION", if it is requested through a distributor.
The theory of "BUCKET SELECTION" can be applied when a bucket is procured from a local attachment
manufacturers. But the quality of the bucket from a local supplier can not be guaranteed by Komatsu.
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters
m3 (cu.yd) m3 (cu.yd) cutters)
mm (in) mm (in)
PC01-1 0.48 (1'7")
0.008 (0.01) 0.007 (0.009) 250 (9.8") 265 (10.4") 7 (15)
PC02-1 0.575 (1'11")
0.012 (0.016) 0.01 (0.013) 300 (11.8") 320 (12.6") 10 (22)
PC03-2 0.687 (2'3") 0.884 (2'11")
0.012 (0.016) 0.011 (0.14) 225 (8.9") 250 (9.8") 11 (24)
0.02 (0.026)* 0.02 (0.026) 325 (12.8") 350 (13.8") 14 (31)
0.025 (0.033) 0.024 (0.031) 375 (14.8") 400 (15.7") 15 (33)
PC12R-8 0.88 (2'11") 1.13 (3'8")
0.03 (0.04) 250 (9.8") 20 (44)
0.035(0.046) 300 (11.8") 23 (51)
0.04 (0.05)* 350 (13.8") 24 (53)
0.05 (0.065) 400 (15.7") 25 (55)
0.06 (0.08) 450 (17.7") 26 (57)
PC15MRX-1 0.965 (3'2") 1.215 (4'0")
0.022 (0.029) 300 (11.8") 350 (13.8")
0.04 (0.05) 350 (13.8") 400 (15.7")
0.044 (0.06) 400 (15.7") 450 (17.7")
PC15R-8 0.965 (3'2") 1.215 (4'0")
0.03 (0.04) 250 (9.8") 20 (44)
0.035(0.046) 300 (11.8") 23 (51)
0.04 (0.05)* 350 (13.8") 24 (53)
0.05 (0.065) 400 (15.7") 25 (55)
0.06 (0.08) 450 (17.7") 26 (57)
PC20MRX-1 0.93 (3'1") 1.28 (4'2")
0.033 (0.043) 0.03 (0.04) 250 (9.8") 320 (12.6") 32 (70)
0.044 (0.058) 0.04 (0.05) 350 (13.8") 420 (16.2") 37 (82)
0.066 (0.086) 0.06 (0.08) 430 (16.9") 500 (13.8") 48 (106)
0.08 (0.10) 0.07 (0.09) 530 (20.9") 600 (23.6") 52 (115)
PC20R-8 1.08 (3'7") 1.38 (4'6")
0.035 (0.046) 320 (12.6") 32 (70)
0.055 (0.072) 420 (16.5") 37 (82)
0.07 (0.09) 500 (19.7") 45 (99)
0.085 (0.11) 600 (23.6") 52 (115)
PC27MRX-1 1.11 (3'8") 1.41 (4'8")
0.042 (0.055) 254 (10")
0.051 (0.067) 305 (12")
0.08 (0.105) 430 (17") 500 (19.7")
0.08 (0.105) 457 (18")
0.09 (0.118) 530 (21") 600 (23'6")
PC27R-8 1.2 (3'11") 1.5 (4'11")
0.045 (0.06) 250 (9.8") 32 (70)
0.06 (0.08) 350 (13.5") 40 (88)
0.075 (0.1)* 450 (17.7") 52 (115)
0.095 (0.12) 600 (23.6") 60 (132)
0.105 (0.135) 650 (25.6") 65 (143)
* Strengthened bucket
*** Without side cutters
3A-76
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters
m3 (cu.yd) m3 (cu.yd) cutters)
mm (in) mm (in)
PC30MRX-1 1.26 (4'1") 1.66 (4'4")
0.035 (0.046) 0.03 (0.04) 250 (9.8") 320 (12.6") 63 (139)
0.044 (0.058) 0.04 (0.05) 280 (11.0") 350 (13.8") 52 (115)
0.09 (0.12) 0.08 (0.10) 430 (16.9") 500 (19.7") 70 (154)
0.11 (0.14) 0.10 (0.13) 525 (20.7") 600 (23.6") 59 (130)
PC35MRX-1 1.35 (4'5") 1.75 (5'9")
0.066 (0.086) 305 (12")
0.10 (0.131) 457 (18")
0.11 (0.143) 525 (20.7") 600 (23.6")
0.14 (0.18) 610 (24")
PC35R-8 1.35 (4'5") 1.75 (5'9")
0.05 (0.065) 300 (11.8") 55 (121)
0.07 (0.09) 400 (15.7") 65 (143)
0.095 (0.12) 500 (19.7") 80 (176)
0.12 (0.16) 600 (23.6") 90 (198)
0.13 (0.17) 650 (25.6") 95 (209)
PC40MRX-1 1.38 (4'6") 1.9 (6'3")
0.055 (0.07) 0.05 (0.065) 300 (11.8") 370 (14.6") 78 (172)
0.11 (0.14) 0.10 (0.13) 430 (16.9") 500 (19.7") 94 (207)
0.14 (0.18) 0.13 (0.17) 535 (21.1") 600 (23.6") 105 (231)
0.16 (0.21) 0.12 (0.18) 585 (23.0") 650 (25.6") 113 (249)
PC45MRX-1 1.48 (4'10") 1.9 (6'3")
0.055 (0.07) 300 (11.8") 370 (14.6") 78 (172)
0.09 (0.12) 430 (16.9") 500 (19.7") 94 (207)
0.16 (0.21) 585 (23.0") 650 (25.6") 113 (249)
0.18 (0.24) 630 (24.8") 700 (27.6")
PC45R-8 1.48 (4'10") 1.9 (6'3")
0.07 (0.09) 300 (11.8") 75 (165)
0.10 (0.13) 400 (15.7") 90 (198)
0.125 (0.16) 500 (19.7") 100 (220)
0.150 (0.20) 600 (23.6") 115 (254)
0.175 (0.23) 700 (27.6") 125 (276)
* Strengthened bucket
*** Without side cutters
3A-77
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
1.65 2.25
PC60-7 (5'5") (7'5")
0.09 (0.12) 0.08 (0.10) 350 (13.8") 450 (17.7") 148 (330)
0.13 (0.17) 0.11 (0.14) 450 (17.7") 550 (21.7") 161 (355)
0.20 (0.26) 0.18 (0.24) 550 (21.7") 650 (25.6") 184 (406)
0.28 (0.37) 0.25 (0.33) 650 (25.6") 750 (29.5") 212 (467)
0.34 (0.45) 0.32 (0.42) 725 (28.5") 825 (32.5") 220 (485)
1.7 2.1
PC75R-2 (5'7") (6'11")
0.086 (0.11) 300 (11.8") 128 (282)*
0.128 (0.17) 400 (15.7") 160 (353)*
0.171 (0.22) 500 (19.7") 184 (406)*
0.2 (0.26) 600 (23.6") 174 (384)*
0.232 (0.30) 700 (27.6") 189 (417)*
0.265 (0.35) 800 (31.5") 196 (432)*
1.65 2.25
PC78US-6 (5'5") (7'5")
0.09 (0.12) 0.08 (0.10) 350 (13.8") 450 (17.7") 148 (330)
0.12 (0.16) 0.11 (0.14) 450 (17.7") 550 (21.7") 161 (355)
0.20 (0.26) 0.18 (0.24) 550 (21.7") 650 (25.6") 184 (406)
0.28 (0.37) 0.25 (0.33) 650 (25.6") 750 (29.5") 212 (467)
0.34 (0.45) 0.32 (0.42) 725 (28.5") 825 (32.5") 220 (485)
1.65 2.25
PC78MR-6 (5'5") (7'5")
0.09 (0.12) 0.08 (0.10) 350 (13.8") 450 (17.7") 148 (330)
0.12 (0.16) 0.11 (0.14) 450 (17.7") 550 (21.7") 161 (355)
0.20 (0.26) 0.18 (0.24) 550 (21.7") 650 (25.6") 184 (406)
0.28 (0.37) 0.25 (0.33) 650 (25.6") 750 (29.5") 212 (467)
0.34 (0.45) 0.32 (0.42) 725 (28.5") 825 (32.5") 220 (485)
1.6 1.85 2.3
PC95R-2 (5'3") (6'1") (7'7")
0.086 (0.11) 300 (11.8") 128 (282)*
0.128 (0.17) 400 (15.7") 160 (353)*
0.171 (0.22) 500 (19.7") 184 (406)*
0.213 (0.28) 600 (23.6") 200 (441)*
0.255 (0.33) 700 (27.6") 218 (481)*
0.298 (0.39) 800 (31.5") 236 (520)*
0.34 (0.44) 900 (35.4") 256 (564)*
2.06 2.36 2.86
PC100-6, PC100L-6 (6'9") (7'9") (9'5")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 566 (22.3") 256 (564)
0.28 (0.37) 0.26 (0.34) 600 (23.6") 720 (28.3") 303 (668)
0.36 (0.47) 0.33 (0.43) 700 (27.6") 820 (32.3") 330 (728)
0.44 (0.58) 0.40 (0.52) 833 (32.8") 953 (37.5") 369 (813)
0.55 (0.72) 0.50 (0.65) 1000 (39.4") 380 (838)*
1.85 2.0 2.3
PC110R-1 (6'1") (6'7") (7'7")
0.093 (0.12) 300 (11.8") 168 (370)*
0.139 (0.18) 400 (15.7") 194 (428)*
0.181 (0.24) 500 (19.7") 218 (481)*
0.225 (0.29) 600 (23.6") 234 (516)*
0.27 (0.35) 700 (27.6") 252 (556)*
0.314 (0.41) 800 (31.5") 270 (595)*
0.36 (0.47) 900 (35.4") 294 (648)*
0.4 (0.52) 1000 (39.4") 320 (705)*
2.1 2.50 3.00
PC120-6, PC120-6 EXCEL (6'11") (8'2") (9'10")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 566 (22.3") 256 (564)
0.28 (0.37) 0.26 (0.34) 600 (23.6") 720 (28.3") 303 (668)
0.36 (0.47) 0.33 (0.43) 700 (27.6") 820 (32.3") 330 (728)
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880)
0.60 (0.78) 0.55 (0.72) 1000 (39.4") 400 (882)*
0.18 (0.24) 0.16 (0.21) 450 (17.7") 566 (22.3") 256 (564)
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
3A-78
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.1 2.50 3.00
PC120-6*4, PC120LC-6*4 (6'11") (8'2") (9'10")
0.35 (0.46) 610 (24") 421 (928)*
0.50 (0.65) 762 (30") 463 (1021)*
0.60 (0.79) 914 (36") 525 (1157)*
0.70 (0.92) 1067 (42") 564 (1244)*
0.34 (0.44) 610 (24") 441 (972)*
0.45 (0.59) 762 (30") 509 (1122)*
0.56 (0.73) 914 (36") 581 (1280)*
0.67 (0.88) 1067 (42") 652 (1437)*
2.1 2.50 3.00
PC128US-2 (6'11") (8'2") (9'10")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 570 (22.4") 256 (565)
0.28 (0.38) 0.26 (0.34) 600 (23.6") 720 (28.3") 303 (670)
0.36 (0.50) 0.33 (0.43) 700 (27.6") 820 (32.3") 330 (730)
0.45 (0.59) 0.40 (0.52) 833 (32.8") 953 (37.5") 369 (810)
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880)
0.55 (0.72) 0.50 (0.65) 1000 (39.4") 380 (840)*
2.1 2.50 3.00
PC130-6** (6'11") (8'2") (9'10")
0.24 (0.31) 0.22 (0.29) 450 (17.7") 575 (22.6") 314 (692)*
0.28 (0.37) 0.26 (0.34) 550 (21.7") 675 (26.6") 339 (747)*
0.35 (0.46) 0.33 (0.43) 600 (23.6") 725 (28.5") 367 (809)*
0.47 (0.61) 0.43 (0.56) 750 (29.5") 875 (34.4") 419 (924)*
0.59 (0.77) 0.53 (0.69) 900 (35.4") 1025 (40.4") 469 (1034)*
0.68 (0.89) 0.61 (0.80) 1000 (39.4") 1125 (44.3") 497 (1096)*
2.50
PC130-6 MIGHTY (8'2")
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880)
2.25 2.61 2.90
PC160LC-7** (7'5") (8'7") (9'6")
0.27 (0.35) 0.25 (0.33) 450 (17.7") 575 (22.6") 369 (813)*
0.40 (0.52) 0.36 (0.47) 600 (23.6") 725 (28.5") 413 (910)*
0.49 (0.64) 0.45 (0.59) 700 (27.6") 825 (32.5") 451 (994)*
0.58 (0.96) 0.53 (0.69) 800 (31.5") 925 (36.4") 480 (1058)*
0.67 (0.88) 0.61 (0.80) 900 (35.4") 1025 (40.4") 518 (1142)*
0.76 (0.99) 0.70 (0.92) 1000 (39.4") 1125 (44.3") 547 (1265)*
0.95 (1.24) 0.85 (1.11) 1200 (47.2") 1325 (52.2") 614 (1354)*
2.25 2.61 2.90
PC160LC-7 (7'5") (8'7") (9'6")
0.60 (0.78) 0.55 (0.72) 900 (35.4") 1000 (39.4") 474 (1040)
0.65 (0.85) 0.60 (0.78) 966 (38.0") 1066 (42.0) 499 (1100)
0.70 (0.92) 0.65 (0.85) 1100 (43.3") 504 (1100)*
2.61 2.9
PC160LC-7*** (8'7") (9'6")
0.47 (0.62) 610 (24") 545 (1201)
0.63 (0.82) 762 (30") 585 (1289)
0.79 (1.03) 914 (36") 659 (1452)
0.95 (1.24) 1067 (42") 719 (1585)
0.45 (0.59) 610 (24") 626 (1380)
0.60 (0.79) 762 (30") 659 (1452)
0.76 (1.00) 914 (36") 740 (1632)
0.93 (1.22) 1067 (42") 806 (1777)
2.5 3.0
PC158USLC-2 (8'2") (9'10")
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 401 (884)
0.55 (0.72) 0.50 (0.65) 901(35.5") 1021 (40.2") 452 (996)
0.60 (0.78) 0.55 (0.72) 1000 (39.4") 1120 (44.1") 458 (1010)
2.25 2.61 2.90
PC180LC-7 (7'5") (8'7") (9'6")
0.40 (0.52) 0.36 (0.47) 600 (23.6") 725 (28.5") 413 (910)*
0.49 (0.64) 0.45 (0.59) 700 (27.6") 825 (32.5") 451 (994)*
0.58 (0.76) 0.53 (0.69) 800 (31.5") 925 (36.4") 480 (1058)*
0.67 (0.88) 0.61 (0.80) 900 (35.4") 1025 (40.4") 518 (1142)*
0.95 (1.24) 0.85 (1.11) 1200 (47.2") 1325 (52.2") 614 (1354)*
1.14 (1.49) 1.03 (1.35) 1400 (55.1") 1525 (60.0") 680 (1499)*
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** USA source
*4 For USA
3A-79
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
1.84 2.41 2.93
PC200-7, PC200LC-7 (6') (7'11") (9'7")
0.50 (0.65) 0.45 (0.59) 750 (29.5") 855 (33.7") 478 (1050)
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 645 (1420)
0.93 (1.22) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 696 (1530)
1.05 (1.37) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 757 (1670)
1.17 (1.53) 1.00 (1.31) 1450 (57.1") 940 (2070)*
1.84 2.41 2.93
PC200-7*5, PC200LC-7*5 (6') (7'11") (9'7")
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 658 (1450)
0.80 (1.05)*4 0.70 (0.92) 1045 (41.1") 1150 (45.3") 783 (1726)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 728 (1605)
1.0 (1.31) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 772 (1702)
2.41 2.93
PC200-7***, PC200LC-7*** (7'11") (9'7")
0.50 (0.66) 610 (24") 639 (1409)
0.67 (0.88) 762 (30") 679 (1497)
0.86 (1.13) 914 (36") 767 (1690)
1.04 (1.36) 1067 (42") 842 (1856)
1.22 (1.59) 1219 (48") 910 (2007)
1.38 (1.80) 1372 (54") 962 (2121)
1.53 (2.0) 1524 (60") 1102 (2430)
0.48 (0.63) 610 (36") 655 (1445)
0.65 (0.85) 762 (42") 717 (1580)
0.83 (1.08) 914 (48") 792 (1745)
0.99 (1.30) 1067 (24") 895 (1973)
1.16 (1.52) 1219 (29") 1036 (2283)
1.8 2.4 2.9
PC210-7** (5'11") (7'10") (9'6")
0.48 (0.63) 600 (23.6") 480 (1058)
0.55 (0.72) 700 (27.6") 530 (1168)
0.63 (0.82) 800 (31.5") 580 (1279)
0.71 (0.93) 900 (35.4") 610 (1345)
0.78 (1.02) 1000 (39.4") 650 (1433)
0.86 (1.15) 1100 (43.3") 700 (1543)
0.96 (1.26) 1200 (47.2") 760 (1675)
1.03 (1.35) 1300 (51.2") 810 (1786)
1.11 (1.45) 1400 (55.1") 870 (1918)
1.19 (1.56) 1500 (59.1") 930 (2050)
1.49 (1.95) 1600 (63.0") 1100 (2425)
1.58 (2.07) 1700 (66.9") 1150 (2535)
1.68 (2.20) 1800 (70.9") 1200 (2645)
1.8 2.4 2.9
PC210LC-7**, PC210NLC-7** (5'11") (7'10") (9'6")
0.48 (0.63) 600 (23.6") 480 (1058)
0.55 (0.72) 700 (27.6") 530 (1168)
0.63 (0.82) 800 (31.5") 580 (1279)
0.71 (0.93) 900 (35.4") 610 (1345)
0.78 (1.02) 1000 (39.4") 650 (1433)
0.86 (1.15) 1100 (43.3") 700 (1543)
0.96 (1.26) 1200 (47.2") 760 (1675)
1.03 (1.35) 1300 (51.2") 810 (1786)
1.11 (1.45) 1400 (55.1") 870 (1918) (NLC: )
1.19 (1.56) 1500 (59.1") 930 (2050) (NLC: ) (NLC: ) (NLC: )
1.49 (1.95) 1600 (63.0") 1100 (2425) (NLC: ) (NLC: ) (NLC: )
1.58 (2.07) 1700 (66.9") 1150 (2535) (NLC: )
1.68 (2.20) 1800 (70.9") 1200 (2645) (NLC: )
1.84 2.41 2.93
PC210-7*5, PC210LC-7*5 (6') (7'11") (9'7")
0.80 (1.05)*4 0.70 (0.92) 1045 (41.1") 1150 (45.3") 783 (1726)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 728 (1605)
1.0 (1.31) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 772 (1702)
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** USA source
*4 Heavy-duty bucket
*5 China source
3A-80
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.00 2.50 3.05
PC220-7, PC220LC-7 (6'7") (8'2") (10')
0.72 (0.94) 0.65 (0.85) 900 (35.4") 1005 (39.6") 658 (1450)
1.00 (1.31) 0.90 (1.18) 1155 (45.5") 1260 (49.6") 734 (1620)
1.14 (1.49) 1.00 (1.31) 1300 (51.2") 1405 (55.3") 793 (1750)
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3") 845 (1860)
2.00 2.50 3.05 3.50
PC220-7*5, PC220LC-7*5 (6'7") (8'2") (10') (11'6")
0.72 (0.94) 0.65 (0.85) 900 (35.4") 1005 (39.6") 658 (1450)
1.00 (1.31) 0.90 (1.18) 1155 (45.5") 1260 (49.6") 787 (1735)
1.17 (1.49) 1.00 (1.31) 1300 (51.2") 1405 (55.3") 858 (1892)
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3") 896 (1975)
3.05 3.5
PC220LC-7*** (10') (11'6")
0.54 (0.70) 610 (24") 732 (1614)
0.72 (0.94) 762 (30") 845 (1862)
0.90 (1.18) 914 (36") 912 (2011)
1.09 (1.43) 1067 (42") 1019 (2247)
1.28 (1.67) 1219 (48") 1092 (2407)
1.49 (1.95) 1219 (48") 1116 (2461)
1.68 (2.20) 1219 (48") 1192 (2627)
0.48 (0.63) 610 (24") 770 (1698)
0.67 (0.87) 762 (30") 890 (1963)
0.85 (1.11) 914 (36") 969 (2137)
1.03 (1.35) 1067 (42") 1078 (2377)
1.22 (1.60) 1219 (48") 1188 (2619)
2.4 2.9
PC228US-3, PC228USLC-3 (7'10") (9'6")
0.50 (0.65) 0.45 (0.59) 750 (29.5") 885 (34.8") 478 (1,050)
0.60 (0.78) 0.55 (0.72) 870 (34.3") 974 (38.4") 536 (1,180)
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 626 (1,380)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 678 (1,490)
1.05 (1.37) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 757 (1,670)
1.8 2.4 2.9
PC230NHD-7 (5'11") (7'10") (9'6")
0.48 (0.63) 600 (23.6") 480 (1058)
0.55 (0.72) 700 (27.6") 530 (1168)
0.63 (0.82) 800 (31.5") 580 (1279)
0.71 (0.93) 900 (35.4") 610 (1345)
0.78 (1.02) 1000 (39.4") 650 (1433)
0.86 (1.15) 1100 (43.3") 700 (1543)
0.96 (1.26) 1200 (47.2") 760 (1675)
1.03 (1.35) 1300 (51.2") 810 (1786)
1.11 (1.45) 1400 (55.1") 870 (1918)
1.19 (1.56) 1500 (59.1") 930 (2050)
1.49 (1.95) 1600 (63.0") 1100 (2425)
1.58 (2.07) 1700 (66.9") 1150 (2535)
1.68 (2.20) 1800 (70.9") 1200 (2645)
2.0 2.5 3.0 3.5
PC240LC-7**, PC240NLC-7** (6'7") (8'2") (9'10") (11'6")
0.55 (0.72) 600 (23.6") 780 (1720)*
0.64 (0.84) 700 (27.6") 810 (1786)*
0.73 (0.95) 800 (31.5") 840 (1852)*
0.83 (1.09) 900 (35.4") 880 (1940)*
0.92 (1.20) 1000 (39.4") 910 (2006)*
1.01 (1.32) 1100 (43.3") 940 (2072)*
1.11 (1.45) 1200 (47.2") 960 (2116)*
1.20 (1.57) 1300 (51.2") 990 (2183)*
1.29 (1.69) 1400 (55.1") 1020 (2249)*
1.40 (1.83) 1500 (59.1") 1060 (2337)*
1.49 (1.95) 1600 (63.0") 1100 (2425)*
1.58 (2.07) 1700 (66.9") 1150 (2535)*
1.68 (2.20) 1800 (70.9") 1200 (2645)*
1.79 (2.34) 1900 (74.8") 1250 (2756)*
1.89 (2.47) 2000 (78.4") 1300 (2866)*
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** USA source
*4 Heavy-duty bucket
*5 China source
3A-81
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.50 3.05 3.5
PC270-7 (8'2") (10') (11'6")
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3) 845 (1860)
3.05 3.5
PC270LC-7*** (10') (11'6")
0.80 (1.05) 762 (30") 893 (1968)
1.01 (1.32) 914 (36") 980 (2160)
1.22 (1.59) 1067 (42") 1089 (2401)
1.43 (1.87) 1219 (48") 1175 (2591)
1.64 (2.15) 1219 (48") 1260 (2777)
1.87 (2.45) 1219 (48") 1325 (2921)
0.74 (0.97) 610 (24") 979 (2159)
0.95 (1.24) 762 (30") 1074 (2367)
1.16 (1.51) 914 (36") 1194 (2633)
1.37 (1.79) 1219 (48") 1314 (2897)
2.0 2.5 3.05 3.5
PC290LC-7**, PC290NLC-7** (6'7") (8'2") (10') (11'6")
0.65 (0.85) 0.58 (0.76) 600 (23.6") 686 (1512)*
0.74 (0.97) 0.66 (0.86) 700 (27.6") 740 (1631)*
0.95 (1.24) 0.85 (1.11) 900 (35.4") 848 (1870)*
1.16 (1.52) 1.04 (1.36) 1100 (43.3") 956 (2108)*
1.37 (1.79) 1.27 (1.66) 1300 (51.2") 1064 (2346)*
1.58 (2.07) 1.39 (1.82) 1500 (59.1") 1172 (2584)*
1.80 (2.35) 1.56 (2.04) 1700 (66.9") 1280 (2822)*
2.10 (2.75) 1.89 (2.08) 1750 (68.9") 1230 (2712)*
2.2 2.55 3.185 4.02
PC300-7, PC300LC-7 (7'3") (8'4") (10'5") (13'2")
0.52 (0.68) 0.48 (0.63) 610 (24") 740 (29.1") 664 (1460)
1.14 (1.49) 1.00 (1.31) 1145 (45.1") 1275 (50.2") 900 (1980)
1.40 (1.83) 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1015 (2240)
1.40 (1.83)** 1.20 (1.57) 1458 (54.7") 1508 (3320)
1.60 (2.09) 1.40 (1.83) 1515 (59.6") 1645 (64.8") 1102 (2430)
1.80 (2.35) 1.60 (2.09) 1700 (66.9") 1115 (2460)
3.19 4.02
PC300LC-7***, PC300HD-7 (10'5") (13'2")
0.88 (1.15) 762 (30") 1029 (2268)*
1.11 (1.45) 914 (36") 1123 (2476)*
1.35 (1.76) 1067 (42") 1246 (2747)*
1.58 (2.07) 1219 (48") 1313 (2895)*
1.82 (2.38) 1372 (54") 1425 (3142)*
0.84 (1.10) 762 (30") 1157 (2550)*
1.10 (1.40) 914 (36") 1250 (2755)*
1.31 (1.71) 1067 (42") 1394 (3074)*
1.55 (2.02) 1219 (48") 1504 (3316)*
1.78 (2.33) 1372 (54") 1573 (3467)*
3.185
PC350-7, PC350LC-7 (10'5")
1.40 (1.83)*6 1.20 (1.57) 1458 (54.7") 1508 (3320)
2.2 2.55 3.185 4.02
PC300-6*5 (7'3") (8'4") (10'5") (13'2")
0.52 (0.68) 0.48 (0.63) 610 (24") 740 (29.1") 664 (1464)
1.14 (1.49) 1.00 (1.31) 1145 (45.1") 1275 (50.2") 900 (1984)
1.40 (1.83) 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1012 (2231)
1.40 (1.83)*6 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1301 (2868)
1.60 (2.09) 1.40 (1.83) 1515 (59.6") 1645 (64.8") 1196 (2637)
1.80 (2.35) 1.60 (2.09) 1700 (66.9") 1213 (2674)
2.2 2.55 3.19 4.02
PC340LC-7, PC340NLC-7 (7'3") (8'4") (10'6") (13'2")
0.60 (0.78) 600 (23.6") 684 (1508)*
1.12 (1.46) 1000 (39.4") 873 (1925)*
1.38 (1.81) 1200 (47.2") 977 (2154)*
1.65 (2.16) 1400 (55.1") 1062 (2341)*
1.79 (2.34) 1500 (59.1") 1104 (2438)*
1.92 (2.51) 1600 (63") 1166 (2570)*
2.12 (2.77) 1750 (68.9") 1230 (2712)*
2.38 (3.11) 1800 (70.9") 1450 (3197)*
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** USA source
*5 China source
*6 Rock bucket
3A-82
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.20 2.55 3.185 4.02
PC380LC-6 (7'3") (8'4") (10'5") (13'2")
0.52 (0.68) 0.48 (0.63) 610 (24") 740 (29.1") 660 (1455)
1.14 (1.49) 1.00 (1.31) 1145 (45") 1275 (50.2") 900 (1984)
1.32 (1.73) 1.20 (1.57) 1340 (52.8") 1445 (26.9") 1010 (2227)
1.60 (2.09) 1.40 (1.83) 1515 (59.6") 1645 (64.8") 1100 (2425)
1.32 (1.73)*6 1.20 (1.57) 1310 (51.6") 1410 (55.5") 1270 (2800)
1.80 (2.35) 1.60 (2.09) 1700 (66.9") 1160 (2557)
2.4 2.9 3.38 4.0 4.8
PC400-6, PC400LC-6, PC400-6 EXCEL, PC400LC EXCEL, PC400-6*5 (7'10") (9'6") (11'1") (13'1") (15'9")
1.30 (1.70) 1.20 (1.57) 1120 (44.1") 1270 (50") 1115 (2458)
1.59 (2.08) 1.40 (1.83) 1270 (50") 1420 (55.9") 1197 (2639)
1.80 (2.35) 1.60 (2.09) 1425 (56.1") 1575 (62") 1303 (2873)
1.8 (2.35)*6 1.60 (2.09) 1425 (56.1") 1575 (62") 1704 (3757)
2.06 (2.69) 1.80 (2.35) 1565 (61.6") 1715 (67.5") 1391 (3067)
2.20 (2.88) 2.00 (2.62) 1715 (67.5") 1396 (3757)
2.4 2.9 3.38 4.0 4.8
PC400LC-6***, PC400HD-6 (7'10") (9'6") (11'1") (13'1") (15'9")
1.25 (1.63) 914 (36") 1235 (2723)
1.50 (2.00) 1067 (42") 1368 (3015)
1.82 (2.38) 1219 (48") 1456 (3210)
2.10 (2.75) 1372 (54") 1606 (3540)
2.29 (3.00) 1524 (60") 1691 (3729)
1.25 (1.63) 914 (36") 1498 (3302)
1.50 (2.00) 1067 (42") 1671 (3683)
1.82 (2.38) 1219 (48") 1766 (3894)
2.10 (2.75) 1372 (54") 1932 (4260)
2.29 (3.00) 1524 (60") 2048 (4516)
0.96 (1.25) 762 (30") 1175 (2592)
1.15 (1.50) 838 (33") 1267 (2794)
1.33 (1.75) 991 (39") 1348 (2972)
1.62 (2.12) 1143 (45") 1511 (3332)
3.38
PC450-6 MIGHTY, PC450LC-6 MIGHTY (11'1")
1.80 (2.35) 1.60 (2.09) 1385 (54.5") 1510 (59.4") 1691 (3728)
2.06 (2.69)*4 1.80 (2.35) 1565 (61.6") 1715 (67.5") 1810 (3990)
2.4 2.9 3.38 4.0 4.8
PC450-6, PC450LC-6** (7'10") (9'6") (11'1") (13'1") (15'9")
1.30 (1.70) 1.20 (1.57) 1120 (44.1") 1270 (50") 1120 (3469)
1.59 (2.08) 1.40 (1.83) 1270 (50") 1420 (55.9") 1190 (2623)
1.80 (2.35) 1.60 (2.09) 1425 (56.1") 1550 (61.0") 1290 (2844)
1.8 (2.35)*4 1.60 (2.09) 1386 (54.5") 1536 (60.5") 1640 (3615)
2.06 (2.69) 1.80 (2.35) 1565 (61.6") 1715 (67.5") 1390 (3064)
2.20 (2.88) 2.00 (2.62) 1715 (67.5") 1865 1395 (3075)
6.6 7.3 7.66
(21'9") (23'11") (25'2")
2.9 3.5 3.5 4.3 5.2
PC600-6, PC600LC-6 (9'6") (11'6") (11'6") (14'1") (17'1")
2.0 (2.62) 1.8 (2.35) 1250 (49.2") 1430 (56.3") 2200 (4850)
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** USA source
*5 China source
*6 Rock bucket
3A-83
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 2.1 t/m3 (3500 lb/cu.yd)
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
cutters cutters m (ft.in)
m3 (cu.yd) m3 (cu.yd) (With side cutters)
mm (in) mm (in)
3.5 4.2 5.2
PC600LC-6*** (11'6") (14'0") (17'1")
1.71 (2.23) 914 (36") 2328 (5132)
2.09 (2.73) 1067 (42") 2843 (6268)
2.49 (3.25) 1219 (48") 3097 (6827)
2.89 (3.78) 1372 (54") 3352 (7389)
3.30 (4.32) 1524 (60") 3530 (7783)
3.72 (4.86) 1676 (66") 3784 (8343)
7.66 7.66
(25'2") (25'2")
2.9 3.5
PC600LC-6** (9'6") (11'6")
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
7.3
(23'11")
3.5
PC600-6 QUARRY (11'6")
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
6.6
(21'9")
2.9
PC600SE-6** (9'6")
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
3.6 4.6 5.6
PC750-6, PC750LC-6 (11'10") (15'1") (18'4")
2.8 (3.66) 2.5 (3.27) 1550 (61") 1700 (66.9") 2740 (6040)
3.1 (4.05) 2.8 (3.66) 1700 (66.9") 1850 (72.8") 2960 (6530)
2.92
PC750SE-6 (9'7")
4.0 (5.23) 3.5 (4.58) 2000 (78.7") 2100 (82.8") 3435 (7570)
4.3 (5.62) 3.8 (4.97) 2150 (84.6") 2250 (88.7") 3870 (8530)
4.5 (5.89) 4.0 (5.23) 2230 (87.8") 2330 (91.9") 4050 (8930)
3.6
PC800-6 (11'10")
3.4 (4.45) 3.0 (3.92) 1820 (71.7") 1920 (75.6") 3300 (7280)
2.92
PC800SE-6 (9'7")
4.0 (5.23) 3.5 (4.58) 2000 (78.7") 2100 (82.8") 3435 (7570)
4.3 (5.62) 3.8 (4.97) 2150 (84.6") 2250 (88.7") 3870 (8530)
4.5 (5.87) 4.0 (5.23) 2230 (87.8") 2330 (91.9") 4050 (8930)
2.92 3.6
PC750SE-6**, PC750LC-6** (9'7")*7 (11'10")*8
3.6 (4.71) 1750 (68.9") 3575 (7880)**
4.0 (5.23) 1950 (76.8") 3700 (8160)**
4.4 (5.75) 2140 (84.3") 3800 (8380)**
5.1 (6.67) 2480 (97.6") 3925 (8650)**
5.6 (7.32) 2730 (107.5") 4025 (8870)**
6.0 (7.85) 2920 (115.4") 4100 (9040)**
* Without side cutters For the source of each model, see the tables from 3A-10 to 3A-23.
** UK source
*** For USA
*7 Use with 7.1 m (23'4") boom
*8 Use with 8.2 m (26'11") boom
3A-84
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 2.1 t/m3 (3500 lb/cu.yd)
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Boom length + Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters*
m3 (cu.yd) m3 (cu.yd) mm (in) mm (in) cutters)
3.4 4.5 5.7
PC1250-7, PC1250LC-7 (11'2") (14'9") (18'8")
9
3.4 (4.4) 3.0 (3.9) 1500 (59.1") 1670 (65.7") 3600 (7940)*
4.0 (5.2) 3.5 (4.6) 1710 (67.3") 1880 (74") 3800 (8380)*9
5.0 (6.5) 4.3 (5.6) 2050 (80.7") 2220 (87.4") 4400 (9700)*9
5.2 (6.8) 4.5 (5.9) 2050 (80.7") 2110 (83.1") 5100 (11240)
3.4
PC1250SP-7 (11'2")
6.7 (8.8) 5.9 (7.7) 2280 (89.8") 2340 (92.1") 6000 (13230)*9
8.7 + 3.9 9.1 + 4.1 11.4 + 5.0
PC1800-6 (28'7" + 12'10") (29'10" + 13'5") (37'5" + 16'5")
5.6( 7.3) 5.0 (6.5) 1770 (69.7") 1930 (76") 7570 (16690) *
8.5 (11.1) 7.6 (9.9) 2240 (88.2") 2400 (94.5") 9390 (20700) *
10.1 (13.2) 9.0 (11.8) 2540 (100") 2700 (106") 9600 (21160)
11.0 (14.4) 9.8 (12.8) 2540 (100") 2590 (102") 9370 (20660)
12.0 (15.7) 11.0 (14.4) 2720 (107") 2770 (109") 9985 (22010)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Heavy duty work
General digging and loading
Light material work
Bucket capacity (heaped) Width Weight
kg (lb)
Without side With side Boom length + Arm length
SAE, PCSA CECE (With side
3 (cu.yd) 3 cutters cutters** cutters and m (ft.in)
m m (cu.yd) mm (in) mm (in) wp-2**)
8.0 + 3.6
PC1400-1 (26'3"+ 11'10")
8.5 (11.1) 7.5 (9.8) 2590 (102") 2590 (102") 7550 (16640)
9.5 (12.4) 8.5 (11.1) 2740 (108") 2740 (108") 7920 (17460)
8.6 + 4.0
PC3000-1 (28'3"+ 13'1")
15 (19.6) 13.3 (17.4) 3400 (134") 3400 (134") 16400 (36160)
9.75 + 4.5
PC4000-6 (32'0"+ 14'9")
22 (28.8) 19 (24.9) 3800 (150") 3800 (150") 23300 (51370)
10 + 5.1
PC5500-6 (32'10"+ 16'9")
28 (36.6) 24.3 (31.8) 4220 (166") 4220 (166") 30400 (64020)
11.5 + 5.5
PC8000-6 (37'9"+ 18'1")
38 (49.7) 33 (43.2) 4600 (181") 4600 (181") 42400 (93480)
For the source of each model, see the tables from 3A-14 to 3A-27.
* It is necessary to use strengthened boom and arm
** Wear package number
*** Side cutters, which increase the width of bucket, are not standard
*9 With side shrouds
3A-85
Teeth Features EXCAVATORS
and Teeth Selection (BACKHOE)
Teeth Features
1) Long-life bucket tooth:
Fits the work site where wear resistance of the tooth is required because it must be used to collect sand
and gravel.
2) Self-sharpened bucket tooth:
Fits the work site where penetration ease of the tooth is required because it must be used to dig rock and
clay after blasting.
3) Super self-sharpened bucked tooth:
Fits the work site where penetration ease better than above is required because it must be used to dig
rock after blasting.
4) Standard bucket tooth:
Fits other general work sites.
Teeth Selection
1. Teeth designed by Komatsu
Vertical pin type Horizontal pin type
Self- Self- Super self-
Standard Long-life Standard Long-life
sharpened sharpened sharpened
tooth tooth tooth tooth
tooth tooth tooth
PC100-6
up to PC210-7
PC220-7
up to PC380-6
PC400-6
PC450-6
PC750-6
PC800-6
PC1250-7
: Available
3A-86
Teeth Selection EXCAVATORS
(BACKHOE)
2. HENSLEY teeth
Centerline tooth.
For general use on excavators and Good wear life and penetration.
loaders.
FLARE
Centerline tooth for general purpose
applications on excavators.
Increased productivity.
Slim profile with wide leading edge to
reduce spillage.
Maximizes bucket capacity.
ROCK CHISEL
Excellent penetration.
Centerline tooth with a slim profile and
narrow bite used mainly on excavators.
Excellent wear life.
Appropriate for hard and abrasive soil and
rock applications.
Stays sharp.
ABRASION PANELLED
Centerline tooth for general purpose and
heavy duty applications on excavators and
loaders.
Provides high wear metal and a better
wear life.
Appropriate for applications in abrasive
materials.
Self-sharpening.
Excellent penetration.
Non-centerline tooth with heavy bottom
pad for loaders.
Excellent wear life.
Appropriate for hard and abrasive soil and
shot rock applications.
Stays sharp.
3A-87
Teeth Selection EXCAVATORS
(BACKHOE)
TOOTH STYLE FEATURE - APPLICATION BENEFIT - ADVANTAGE
ROCK PENETRATOR,
HEAVY (RP3)
Heavy-duty version of the RP2.
Excellent penetration.
ABRASION
TIGER
Non-centerline tooth.
Maximum penetration in compact soil.
TWIN TIGER
Non-centerline tooth.
Increased productivity.
For use in compact material for maximum
penetration.
3A-88
Teeth Selection EXCAVATORS
(BACKHOE)
2) 5 Series Teeth / Machine Application Chart For Excavators
TOOTH SHAPES
Model 1 2 3 4 5 6 7 8 9 10
PC100, PC120, PC160
PC200, PC210, PC220, PC230
PC300, PC350, PC400, PC450
PC600, PC750, PC800
: Available
3A-89
Teeth Selection EXCAVATORS
(BACKHOE)
3) Parabolic Series Teeth / Machine Application Chart For Excavators
TOOTH SHAPES
Model 1 2 3 4 5 6 7 8 9 10
PC20, PC30, PC45
PC60
PC100, PC120
PC160
PC200, PC220
PC300, PC350
PC400, PC450
PC600, PC750, PC800
PC1100, PC1250
: Available
3A-90
Teeth Selection EXCAVATORS
(BACKHOE)
4) Hammerless Series Teeth / Machine Application Chart For Excavators
TOOTH SHAPES
Model 1 2 3 4 5 6 7 8 9 10
PC400
PC1800
: Available
3A-91
Model Selection EXCAVATORS
(BACKHOE)
3. KVX teeth
1) Features
1) Long service life of teeth
Free-turning teeth mean long-lasting resistance to wear (some specifications excluded).
2) Excellent wear resistance using Sagitta steel
Based on 130 years of experience in advanced heat-processing technology, teeth and lip plate (base
edge) are afforded optimum wear resistance and hardness.
3) Tooth system without adapter
Teeth are affixed using secure bolts, meaning that no adapter is employed. Problems such as cracks do
not occur. Since teeth are of a uniform thickness, excavation wear resistances do not change.
4) The same Sagitta steel is employed for the lip plate and teeth.
Special steel (Brinell hardness 520 Sagitta steel) is employed for the lip plate, rendering reinforcement
of the rip plate unnecessary. This means a marked reduction in reinforcement costs is possible.
2) Teeth specification
T T T T
W1 W2 W1 W2 W1 W2 W1 W2
L L L L
T T T T
W1 W1 W2 W1 W2 W1 W2
L L L L
FVBH0189
3A-92
Model Selection EXCAVATORS
(BACKHOE)
1. Basic idea for excavator selection
The concept of the combination of bucket size, arm length, and boom length for hydraulic excavators to
match the nature of the operation is as follows.
Main-types of work Combination
Boom/Arm + Bucket
Long boom
Long arm + Small capacity bucket
FVBH0242
2) Larger production
Short boom
Short arm + Large capacity bucket
FVBH0243
FVBH0244
4) Heavy-duty work
Strengthened boom
Strengthened arm + Heavy-duty bucket
FVBH0245
2. Wrong combination
Wrong
1) Long Arm with Large Capacity Bucket
If the machine is operated with a long arm and a
large capacity bucket with a capacity larger than
recommended, the machine will become unstable,
and it will also lose digging power, so the operating
efficiency will drop. In particular, if a strong shock
load is applied to the bucket, there is danger that the
arm may break.
FVBH0246
2) Additional Counterweight
If an excessive capacity bucket or heavy attachment Wrong
is installed, the machine will become unstable, so it
is common to see additional counterweights used.
However, this means that an excessive load is
applied not only to the work equipment and
undercarriage, but also to the whole machine, so this
will lead to a reduction in the service life of the
machine.
FVBH0247
3A-93
Model Selection EXCAVATORS
(BACKHOE)
3. Concepts for selection of backhoe type and loading shovel for large hydraulic excavators
2) Digging function
Loading shovel : This is better for loading blasted rocks where there are many large lumps and digging force
is required. When digging flat surfaces, its horizontal pushing force is strong and it can
show its power, but it is difficult for it to use its pushing force when digging above ground
level.
Backhoe : This is an all-round attachment for digging and loading. When increasing the bucket size to
ensure production volume, make the work equipment (arm, boom) shorter.
(Note: Digging a
(Note: Digging
slope a
and loading)
slope and loading)
Blasted rock
Blasted rock
Natural
ground Natural
Natural
ground Natural
ground
ground About 20 Deep
Blasted rock
Short
Long Blasted rock Deep
Short
Long
Long FVBH0249
Long
NOTE: The bucket size depends on the specific gravity (loose) of the material loaded. For details, see
Bucket and Arm Combination.
3A-94
Model Selection EXCAVATORS
(BACKHOE)
HYDRAULIC EXCAVATOR AND DUMP TRUCK COMBINATION
3A-95
Model Selection EXCAVATORS
(BACKHOE)
HYDRAULIC EXCAVATOR AND DUMP TRUCK COMBINATION
: SUITABLE : POSSIBLE
HYDRAULIC EXCAVATOR DUMP TRUCK
BUCKET CAPACITY
OFF-HIGHWAY DUMP TRUCK
(HEAPED) m3 (cu,yd)
MODEL
HD605 HD985
(SAE) (CECE) HD1500 630E 730E 830E 930E
HD465 HD785
PC1400 B/H 8.5 (11.1) 7.5 (9.8)
3A-96
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
11 (m)
10
9
8
7
6
5
4
3
2
1
0 G.L.
1
2
45
3
3.5
4
5
6
7
8
12 11 10 9 8 7 6 5 4 3 2 1 0
(m) FVBH0270
3A-97
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
Normal rock-loading operations:
Loading machine: PC800-6
Dump truck: HD325-6
PC800-6:STD
PC800SE-6
:SE
:STD
7
PC1250-7 :STD PC1250SP-7
6
5
4
3
2
1
0
1
0.5 2
3
4
45
5 :SP
6 :STD
0.5
7
8
9
11
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FVBH0272
3A-98
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
7
6
5
4
3
2
1
0
1
0.5 2
3
60 4
5
5.5
6
7
8
9
11
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FVPM2976
3A-99
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
3A-100
Production EXCAVATORS
(BACKHOE)
Estimated Hourly Production
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 0.2 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3
10.0 0.17 72 108 180 252 324
11.0 0.18 65 98 164 229 295 360 425 491
12.0 0.20 60 90 150 210 270 330 390 450 510 570 630 690 750
13.0 0.22 55 83 138 194 249 305 360 415 471 526 582 637 692 748 803 858 914 969 1025 1080 1135
15.0 0.25 48 72 120 168 216 264 312 360 408 456 504 552 600 648 696 744 792 840 888 936 984 1032
17.0 0.28 42 64 106 148 191 233 275 318 360 402 445 487 529 572 614 656 699 741 784 826 868 911
19.0 0.32 38 57 95 133 171 208 246 284 322 360 398 436 474 512 549 587 625 663 701 739 777 815
21.0 0.35 34 51 86 120 154 189 223 257 291 326 360 394 429 463 497 531 566 600 634 669 703 737
24.0 0.40 30 45 75 105 135 165 195 225 255 285 315 345 375 405 435 565 595 525 555 585 615 645
27.0 0.45 27 40 67 93 120 147 173 200 227 253 280 307 333 360 387 413 440 467 493 520 547 573
30.0 0.50 24 36 60 84 108 132 156 180 204 228 252 276 300 324 348 372 396 420 444 468 492 516
35.0 0.58 175 195 216 237 257 278 298 319 339 360 381 401 422 442
40.0 0.67 279 297 315 333 351 369 387
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 4.5 4.7 4.9 5.1 5.3 5.5 5.7 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0
15.0 0.25 1080 1128 1176 1224 1272 1320 1368
17.0 0.28 953 995 1038 1080 1122 1165 1207
19.0 0.32 853 891 928 966 1004 1042 1080 1137 1231 1326 1421 1516 1611 1705 1800 1895 1989 2084 2179 2274
21.0 0.35 771 806 840 874 909 943 977 1028 1114 1200 1286 1371 1457 1543 1629 1714 1800 1886 1971 2057
24.0 0.40 675 705 735 765 795 825 855 900 975 1050 1125 1200 1275 1350 1425 1500 1575 1650 1725 1800
27.0 0.45 600 627 653 680 707 733 760 800 867 933 1000 1067 1133 1200 1267 1333 1400 1467 1533 1600
30.0 0.50 540 564 588 612 636 660 684 720 780 840 900 960 1020 1080 1140 1200 1260 1320 1380 1440
35.0 0.58 463 483 504 525 545 566 586 617 668 720 771 823 874 926 977 1029 1080 1131 1183 1234
40.0 0.67 405 423 441 459 477 495 513 540 585 630 675 720 765 810 855 900 945 990 1035 1080
45.0 0.75 480 520 560 600 640 680 720 760 800 840 880 920 960
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 12.5 13.0 13.5 14.0 15.0 16.0 18 20 22 25 28 30 35 38 40
15.0 0.25
17.0 0.28
19.0 0.32 2368 2463
21.0 0.35 2143 2229 2314 2400 2571 3031 3085
24.0 0.40 1875 1950 2025 2100 2250 2400 2700 3000 3300 3750 4200 4500 5250 5700 6000
27.0 0.45 1667 1733 1800 1866 2000 2133 2400 2666 2933 3333 3733 4000 4666 5066 5333
30.0 0.50 1500 1560 1620 1680 1800 1920 2160 2400 2640 3000 3360 3600 4200 4560 4800
35.0 0.58 1286 1337 1388 1440 1543 1645 1851 2057 2263 2571 2880 3085 3600 3908 4114
40.0 0.67 1125 1170 1215 1260 1350 1440 1620 1800 1980 2250 2520 2700 3150 3420 3600
45.0 0.75 1000 1040 1080 1120 1200 1280 1440 1600 1760 2000 2240 2400 2800 3040 3200
Actual production = Estimated Hourly Production Bucket Fill Factor Job Efficiency
Bucket fill factor (K) (PC60~PC1800) Job efficiency (E)
Excavating conditions K Excavating conditions E
Easy excavating 1.1 ~ 1.2 Good 0.83
Average excavating 1.0 ~ 1.1 Average 0.75
Rather difficult excavating 0.8 ~ 0.9 Rather poor 0.67
Difficult excavating 0.7 ~ 0.8 Poor 0.58
3A-101
MEMO
SECTION 3B
MINIMAL SWING RADIUS
EXCAVATORS (UU)
UU stands for "Ultra Urban" machine.
CONTENTS
Features .................................................................... 3B-3
Specifications ........................................................... 3B-4
Dimensions ............................................................... 3B-5
Working ranges, Digging Force .............................. 3B-6
Lifting capacity ......................................................... 3B-7
3B-1
MINIMAL SWING RADIUS
EXCAVATORS (UU)
Minimal Swing Radius Excavator means the excavator having an upper structure with its equipment and
attachments swinging within 120% of the width of the undercarriage. (Defined by ISO 6165)
UU stands for "Ultra Urban" machine named by Komatsu and equivalent to Minimal Swing Radius Excavator.
B<A
C z 1.2A
B C
3B-2
Features MINIMAL SWING RADIUS
EXCAVATORS (UU)
Wide working ranges and small swing radius
The small swing radius of the work equipment facilitates operations even in confined spaces
Easy side ditching with large offset width
The largest working range in this class
Largest digging force in its class
3B-3
Specifications MINIMAL SWING RADIUS
EXCAVATORS (UU)
Model
PC58UU-3 PC78UU-6 PC128UU-2
Item
OPERATING WEIGHT* kg (lb) 5290 (11,670) 7670 (16,910) 13580 (29,940)
FLYWHEEL (SAE) HP (kW)/RPM 39 (29.4)/2400 54 (40.5)/1850 86 (64)/2200
HORSEPOWER: (DIN) PS (kW)/RPM 40 (29.4)/2400 55 (40.5)/1850 87 (64)/2200
BUCKET CAPACITY RANGE 0.055~0.22 0.09~0.34 0.18~0.50
(SAE) m3 (cu.yd) (0.07) (0.29) (0.12) (0.44) (0.24) (0.65)
PERFORMANCE:
Swing speed RPM 10.0 10.0 10.0
Max. travel speed km/h (MPH) Hi 4.5 (2.8) Hi 4.5 (2.8) Hi 4.6 (2.9)
Lo 2.7 (1.7) Lo 3.0 (1.9) Lo 3.2 (2.0)
DIMENSIONS:
(see the page of dimensions)
Front swing radius 1060 (3'5") 1200 (3'11") 1345 (4'5")
mm (ft.in)
Offset width L:910 (3') L:1030 (3'5") L:1170 (3'10")
R:730 (2'5") R:1065 (3'6") R:1150 (3'9")
Tail swing radius 1035 (3'5") 1240 (4'1") 1480 (4'10")
ENGINE: KOMATSU KOMATSU KOMATSU
Model 4D88E S4D95LE S4D102E
No. of cylinders- mm 4-88 90 4-95 115 4-102 120
bore stroke (in) (3.46 3.54) (3.74 4.53) (4.02 4.72)
Piston displacement ltr. (cu.in) 2.19 (134) 3.92 (239) 3.92 (239)
HYDRAULIC SYSTEM: 2 Variable piston 2 Variable piston 1 Variable piston
Hydraulic pump 1 Gear pump 1 Gear pump 1 Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 135 (35.9) 160 (42.2) 226.5 (59.7)
Max. oil pressure kg/cm2 (PSI) 265 (3770) 270 (3840) 355 (5050)***
Track shoe width/ mm (in)/ 400 (16")/ 450 (18")/ 600 (24")/
ground pressure kg/cm2 (PSI) 0.31 (4.4) 0.33 (4.7) 0.36 (5.1)
CAPACITY (Refilled):
Fuel tank ltr.(U.S. Gal) 80 (21.1) 125 (33) 200 (52.8)
Hydraulic oil tank 36 (9.5) 64 (16.9) 69 (18.2)
*: MACHINE SPEC.
Bucket (SAE) 0.22 (0.29) 0.28 (0.37) 0.45 (0.59)
m3 (cu.yd)
Upper attachment Cab Cab Cab
Track shoe Rubber shoe Triple grouser Triple grouser
* Operating weight includes coolant, lubricants, full fuel tank, operator 80 kg (180 lb) and, indicated implement, shoes and upper
attachment.
*** Travel circuit
3B-4
Dimensions MINIMAL SWING RADIUS
EXCAVATORS (UU)
E L
K
C
G G.L D
I
H A
J B FVBH0028
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm Iength Iength
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
1545 5335 1.62
1910 2470 630 400 1935 2610 320 1600 400 2000 (5'1") (17'6") 3.41 (5'4")
PC58UU-3
(6'3") (8'1") (2'1") (1'4") (6'4") (8'7") (1'1") (5'3") (16") (6'7") 2625 5385 (11'2") 2.07
(8'7") (17'8") (6'10")
2235 2840 735 470 2330 2730 360 1870 450 2320 1745 6060 3.75 1.72
PC78UU-6
(7'4") (9'4") (2'5") (1'7") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (5'9") (19'11") (12'4") (5'8")
2750 3480 855 590 2490 2730 390 1990 600 2590 1935 7435 4.29 2.13
PC128UU-2
(9') (11'5") (2'10") (1'11") (8') (9') (1'5") (6'5") (20") (8'1") (6'2") (24'1") (14'1") (7')
3B-5
Working Ranges MINIMAL SWING RADIUS
and Digging Forces EXCAVATORS (UU)
F
A E
D
C
FVBH0029
3B-6
Lifting Capacity MINIMAL SWING RADIUS
EXCAVATORS (UU)
L
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
L : Arm length
B Cf : Rating over front
Cs : Rating over side
C MAX: Rating at maximum reach
kg(lb) FVBH0043
PC58UU-3
Conditions:
Boom : 3410 mm (11'12"), Bucket (SAE) : 0.22 m3 (0.29cu.yd), Shoes : 400 mm (16") unit: kg (lb)
A MAX 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1620 mm (5'4") With blade on ground
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m *990 660 *1000 760 *1530 *1530
(10') (2200) (1450) (2200) (1690) (3380) (3380)
0.0 m *1360 500 *1470 650 *2290 *1230 *1400 *1400
(0') (3010) (1110) (3250) (1430) (5060) (2710) (3080) (3080)
-1.5 m *1410 610 *2110 1170 *1050 *610
(5') (3110) (1350) (4660) (2590) (2320) (1350)
Arm length 1620 mm (5'4") With blade above ground
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m 850 660 980 760 *1530 *1530
(10') (1870) (1450) (2170) (1690) (3380) (3380)
0.0 m 670 500 860 650 1630 *1230 *1400 *1400
(0') (1480) (1110) (1910) (1430) (3600) (2710) (3080) (3080)
-1.5 m 820 610 1570 1170
(5') (1800) (1350) (3470) (2590)
Arm length 1620 mm (5'4") With blade on ground, Additional counterweight
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m *990 720 *1000 830 *1530 *1530
(10') (2200) (1580) (2200) (1840) (3380) (3380)
0.0 m *1360 560 *1470 720 *2290 1340 *1400 *1400
(0') (3010) (1230) (3250) (1580) (5060) (2970) (3080) (3080)
-1.5 m *1410 670 *2110 1290 *1050 680
(5') (3110) (1490) (4660) (2850) (2320) (1500)
Arm length 1620 mm (5'4") With blade above ground, Additional counterweight
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m 910 720 *1000 830 *1530 *1530
(10') (2020) (1580) (2200) (1840) (3380) (3380)
0.0 m 720 560 940 720 1760 1340 *1400 *1400
(0') (1620) (1230) (2070) (1580) (3880) (2970) (3080) (3080)
-1.5 m 890 670 1700 1290
(5') (1960) (1490) (3760) (2850)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3B-7
Lifting Capacity MINIMAL SWING RADIUS
EXCAVATORS (UU)
PC78UU-6
Conditions:
Boom: 3750 mm (12'4"), Bucket (SAE) : 0.28 m3 (0.37 cu.yd), Shoes : 450 mm (18") unit: kg (lb)
A MAX 5.0 m (16') 4.0 m (13') 3.0 m (9') 2.0 m (6')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1720 mm (5'8") With blade on ground
6.0 m 2150* 2150* 2560* 2560*
(19') (4750) (4750) (5640) (5640)
5.0 m 1810* 1730 2590* 2530
(16') (3990) (3810) (5710) (5590)
4.0 m 1760* 1140 2380* 1430 2750* 2480 3410* 3410*
(13') (3890) (2530) (5260) (3150) (6060) (5480) (7520) (7520)
3.0 m 1830* 890 2550* 1360 3200* 2300 4640* 4640*
(9') (4030) (1970) (5640) (3000) (7050) (5070) (10240) (10240)
2.0 m 1990* 770 2260* 820 2780* 1250 3750* 2030
(6') (4390) (1700) (4990) (1810) (6140) (2770) (8260) (4490)
1.0 m 2200* 720 2290* 770 2940* 1150 4060* 1810
(3') (4850) (1590) (5060) (1700) (6480) (2530) (8950) (3990)
0.0 m 2200* 730 2200* 730 2920* 1070 3970* 1690 2920* 2920*
(0') (4850) (1620) (4850) (1620) (6440) (2370) (8760) (3740) (6440) (6440)
-1.0 m 2160* 830 2650* 1050 3550* 1670 4550* 3490
(-3') (4770) (1840) (5840) (2310) (7840) (3680) (10040) (7710)
-2.0 m 2020* 1110 2760* 1710 3480* 3480*
(-6') (4460) (2440) (6100) (3770) (7680) (7680)
-3.0 m 1340* 1340*
(-9') (2970) (2970)
Arm length 1720 mm (5'8") With blade above ground
6.0 m 2150* 2150* 2560* 2560*
(19') (4570) (4570) (5640) (5640)
5.0 m 1810* 1730 2590* 2530
(16') (3990) (3810) (5710) (5590)
4.0 m 1400 1140 1740 1430 2750* 2480 3410* 3410*
(13') (3090) (2530) (3840) (3150) (6060) (5480) (7520) (7520)
3.0 m 1100 890 1670 1360 2870 2300 4640* 4640*
(9') (2440) (1970) (3690) (3000) (6340) (5070) (10240) (10240)
2.0 m 960 770 1020 820 1560 1250 2580 2030
(6') (2130) (1700) (2260) (1810) (3440) (2770) (5690) (4490)
1.0 m 910 720 970 770 1440 1150 2330 1810
(3') (2010) (1590) (2140) (1700) (3190) (2530) (5140) (3990)
0.0 m 930 730 930 730 1360 1070 2200 1690 2920* 2920*
(0') (2060) (1620) (2060) (1620) (3010) (2370) (4860) (3740) (6440) (6440)
-1.0 m 1060 830 1330 1050 2170 1670 4550* 3490
(-3') (2340) (1840) (2950) (2310) (4800) (3680) (10040) (7710)
-2.0 m 1410 1110 2220 1710 3480* 3480*
(-6') (3110) (2440) (4900) (3770) (7680) (7680)
-3.0 m 1340* 1340*
(-9') (2970) (2970)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
PC128UU-2
Conditions:
Boom: 4290 mm (14'1"), Bucket (SAE): 0.44 m3 (0.58 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 5.5 m (18') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2130 mm (7')
6.1 m 2700* 2700* 3100 2250 3550* 3550*
(20') (6000) (6000) (6900) (4900) (7800) (7800)
3.0 m 2250 1550 2450 1750 3450 2450 5500* 5050
(10') (4900) (3500) (5400) (3800) (7600) (5400) (12200) (11100)
0m 2000 1350 2200 1500 2950 2000 5950 3750
(0') (4400) (3000) (4800) (3300) (6500) (4400) (13100) (8300)
-3.0 m 2750 1900 3000 2050 2450 1650
(-10') (6100) (4200) (6600) (4500) (5400) (3600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3B-8
SECTION 3C
LIFTING CAPACITY
CONTENTS
PC15/20 ..................................................................... 3C-2
PC27/30 ..................................................................... 3C-3
PC35/40 ..................................................................... 3C-4
PC45 .......................................................................... 3C-5
PC60 .......................................................................... 3C-6
PC75 .......................................................................... 3C-7
PC78US/MR .............................................................. 3C-9
PC100 ...................................................................... 3C-11
PC110 ...................................................................... 3C-14
PC120 ...................................................................... 3C-18
PC128US ................................................................. 3C-22
PC130 ...................................................................... 3C-23
PC160 ...................................................................... 3C-25
PC200 ...................................................................... 3C-27
PC210 ...................................................................... 3C-33
PC220 ...................................................................... 3C-36
PC228 ...................................................................... 3C-41
PC230 ...................................................................... 3C-42
PC240 ...................................................................... 3C-44
PC270 ...................................................................... 3C-46
PC290 ...................................................................... 3C-48
PC300 ...................................................................... 3C-50
PC340 ...................................................................... 3C-57
PC350 ...................................................................... 3C-59
PC380 ...................................................................... 3C-60
PC400 ...................................................................... 3C-61
PC450 ...................................................................... 3C-71
PC600 ...................................................................... 3C-76
PC750 ...................................................................... 3C-83
PC800 ...................................................................... 3C-89
PC1250 .................................................................... 3C-90
PC1800 .................................................................... 3C-92
3C-1
LIFTING CAPACITY
PC15MRX-1
Conditions:
Boom: 1760 mm (5'7"), Bucket (SAE): 0.044 m3 (0.058 cu.yd), Shoes: 230 mm (9") unit: kg (lb)
PC20MRX-1
Conditions:
Boom: 1809 mm (5'11"), Bucket (SAE): 0.066 m3 (0.086 cu.yd), Shoes: 250 mm (10") unit: kg (lb)
A MAX 3.0 m (10') 2.0 m (7')
B Cf Cs Cf Cs Cf Cs
Arm length 930 mm (3'1") With blade on ground
3.0 m 460* 395
(10') (1010) (870)
2.0 m 330 255 400 310
(7') (720) (560) (880) (680)
1.0 m 290 220 385 300
(3') (640) (480) (840) (660)
0m 300 230 370 285 695 530
(0') (660) (500) (810) (620) (1530) (1160)
1.0 m 405 310 705 535
(3') (890) (680) (1550) (1170)
Arm length 930 mm (3'1") With blade on ground
3.0 m 460* 395
(10') (1010) (870)
2.0 m 455* 255 455* 310
(7') (1000) (560) (1000) (680)
1.0 m 475* 220 565* 300
(3') (1050) (490) (1250) (660)
0m 510* 230 635* 285 990* 530
(0') (1120) (510) (1400) (630) (2180) (1170)
1.0 m 540* 310 975* 535
(3') (1190) (680) (2150) (1180)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-2
LIFTING CAPACITY
PC27MRX-1
Conditions: Boom: 2120 mm (6'11"), Bucket (SAE): 0.08 m3 (0.105 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
PC30MRX-1
Conditions: Boom: 2220 mm (7'3"), Bucket (SAE): 0.09 m3 (0.12 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
3C-3
LIFTING CAPACITY
PC35MRX-1
Conditions: Boom: 2550 mm (8'4"), Bucket (SAE): 0.11 m3 (0.14 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
PC40MRX-1
Conditions:
Boom: 2965 mm (8'11"), Bucket (SAE): 0.14 m3 (0.18 cu.yd), Shoes: 400 mm (16") unit: kg (lb)
3C-4
LIFTING CAPACITY
PC45MRX-1
Conditions:
Boom: 2785 mm (9'2"), Bucket (SAE): 0.16 m3 (0.21 cu.yd), Shoes: 400 mm (16") unit: kg (lb)
3C-5
LIFTING CAPACITY
PC60-7
A
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
Cf : Rating over front
Cs : Rating over side
B
MAX: Rating at maximum reach
C
FVPM2801
Conditions:
Boom: 3710 mm (12'2"), Bucket (SAE): 0.28 m3 (0.37 cu.yd), Shoes: 450 mm (18") unit: kg (Ib)
3C-6
LIFTING CAPACITY
PC75R-2
Conditions:
One piece boom: Bucket (SAE): 0.265 m3 (0.35 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
3C-7
LIFTING CAPACITY
PC75R-2
Conditions:
Two piece boom: 3673 mm (12'1"), Bucket (SAE): 0.265 m3 (0.35 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
3C-8
LIFTING CAPACITY
PC78US-6
Conditions:
Boom: 3710 mm (12'2"), Bucket (SAE): 0.28 m3 (0.37 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
3C-9
LIFTING CAPACITY
PC78MR-6
Conditions:
Boom: 3400 mm (11'2") Bucket (SAE): 0.28 m3 (0.37 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
3C-10
LIFTING CAPACITY
PC100-6
Conditions:
Boom: 4260 mm (14'), Bucket (SAE): 0.44 m3 (0.58 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-11
LIFTING CAPACITY
3C-12
LIFTING CAPACITY
PC100L-6
Conditions:
Boom: 4260 mm (14'), Bucket (SAE): 0.44 m3 (0.58 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-13
LIFTING CAPACITY
PC110R-1
Conditions:
One piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-14
LIFTING CAPACITY
PC110R-1
Conditions:
One piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-15
LIFTING CAPACITY
PC110R-1
Conditions:
Two piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-16
LIFTING CAPACITY
PC110R-1
Conditions:
Two piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-17
LIFTING CAPACITY
PC120-6
Conditions:
Boom: 4600 mm (15'1"), Bucket (SAE): 0.50 m3 (0.65 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-18
LIFTING CAPACITY
3C-19
LIFTING CAPACITY
PC120-6 EXCEL
Conditions:
Boom: 4600 mm (15'1''), Bucket (SAE): 0.50 m3 (0.65 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-20
LIFTING CAPACITY
3C-21
LIFTING CAPACITY
PC128US-2
Conditions:
Boom: 4600 mm (15'1"), Bucket (SAE) 0.45 m3 (0.59 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-22
LIFTING CAPACITY
3C-23
LIFTING CAPACITY
PC130-6 MIGHTY
Conditions:
Boom: 4600 mm (15'1''), Bucket (SAE): 0.50 m3 (0.65 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
3C-24
LIFTING CAPACITY
PC160LC-7
Conditions: Boom: 5150 mm (16'11"), Bucket (SAE): 0.65 m3 (0.85 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (4')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2250 mm (7'5")
7.5 m 2700* 2700*
(24') (6000) (6000)
6.0 m 2400* 2400* 3250* 2850
(19') (5300) (5300) (7200) (6300)
4.5 m 2350* 2050 4450* 2850 5000* 4650
(14') (5200) (4600) (9800) (6200) (11000) (10200)
3.0 m 2450* 1800 4450 2700 6300* 4300 9700* 8150
(9') (5400) (4000) (9800) (6000) (13900) (9500) (21400) (18000)
0m 2950 1700 4150 2400 6550 3750 6750* 6750*
(0') (6600) (3800) (9200) (5400) (14500) (8200) (14900) (14900)
3.0 m 4200 2450 6550 3700 10500* 7100 10250* 10250*
(9') (9300) (5400) (14500) (8200) (23100) (15700) (22700) (22700)
4.5 m 4850* 4200 7050* 7050*
(14') (10700) (9200) (15600) (15600)
Arm length 2610 mm (8'7")
7.5 m 2200* 2200*
(24') (4900) (4900)
6.0 m 2000* 2000* 3350* 2900
(19') (4400) (4400) (7400) (6400)
4.5 m 2000* 1900 4200* 2850
(14') (4400) (4200) (9200) (6300)
3.0 m 2050* 1650 3050 1800 4500 2750 5900* 4400 8700* 8450
(9') (4600) (3700) (6700) (4000) (9900) (6000) (13000) (9700) (19200) (18600)
0m 2650* 1600 2900 1700 4150 2450 6600 3750 7350* 6950
(0') (5900) (3500) (6400) (3700) (9200) (5400) (14600) (8300) (16200) (15400)
3.0 m 3800 2200 4100 2400 6500 3650 11150* 7050 9200* 9200*
(9') (8400) (4900) (9100) (5300) (14400) (8100) (24500) (15600) (20300) (20300)
4.5 m 4950* 3450 5550* 3850 8200* 7350
(14') (11000) (7600) (12200) (8500) (18000) (16200)
Arm length 2900 mm (9'6")
7.5 m 1900* 1900*
(24') (4200) (4200)
6.0 m 1750* 1750* 3250* 2950
(19') (3800) (3800) (7200) (6500)
4.5 m 1700* 1700* 2250* 1850 3900* 2850
(14') (3800) (3800) (4900) (4100) (8600) (6300)
3.0 m 1800* 1550 3050 1800 4500 2700 5500* 4400 7850* 7850*
(9') (3900) (3400) (6700) (4000) (9900) (6000) (12200) (9700) (17300) (17300)
0m 2250* 1450 2850 1650 4100 2400 6600 3700 7650* 6950
(0') (5000) (3200) (6300) (3600) (9100) (5300) (14500) (8200) (16900) (15300)
3.0 m 3450 1950 4050 2300 6400 3600 11500* 6900 8400* 8400*
(9') (7600) (4400) (8900) (5100) (14200) (7900) (25300) (15300) (18500) (18500)
4.5 m 4800* 2950 6050* 3700 8900* 7200
(14') (10600) (6500) (13300) (8200) (19600) (15800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-25
LIFTING CAPACITY
3C-26
LIFTING CAPACITY
PC200-7
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 600 mm (24") unit :kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2500 *2500 *3500 *3500
(25') (5600) (5600) (7700) (7700)
6.1 m *2400 *2400 *3950 *3950
(20') (5300) (5300) (8700) (8700)
4.6 m *2400 2150 3950 2600 *4500 3900
(15') (5300) (4800) (8800) (5700) (9900) (8600)
3.0 m *2550 1950 3850 2500 *5350 3700 *6750 5850 *10450 *10450
(10') (5600) (4300) (8500) (5500) (11800) (8100) (14900) (12900) (23000) (23000)
1.5 m *2800 1850 3750 2350 5400 3450 *8550 5350 *6950 *6950
(5') (6200) (4100) (8300) (5200) (11900) (7600) (18900) (11800) (15300) (15300)
0m 3050 1900 3650 2300 5200 3250 8250 5050 *7400 *7400
(0') (6700) (4200) (8000) (5000) (11500) (7200) (18200) (11100) (16400) (16400)
1.5 m 3350 2050 3600 2250 5100 3150 8100 4900 *10400 9500 *6300 *6300
(5') (7400) (4600) (7900) (4900) (11200) (7000) (17900) (10800) (22900) (20900) (13900) (13900)
3.0 m 4000 2500 5100 3150 8100 4950 *14350 9650 *9800 *9800
(10') (8800) (5500) (11200) (7000) (17900) (10900) (31600) (21300) (21600) (21600)
4.6 m 5650 3550 *8300 5100 *12000 10000
(15') (12500) (7900) (18300) (11200) (26400) (22000)
Arm length 2410 mm (7'11")
7.6 m *4000 *4000
(25') (8800) (8800)
6.1 m *3750 3000 *4450 3950
(20') (8300) (6600) (9800) (8700)
4.6 m 3800 2450 3900 2500 *4950 3800 *5650 *5650
(15') (8400) (5400) (8600) (5600) (10900) (8400) (12500) (12500)
3.0 m 3400 2150 3800 2450 5600 3600 *7450 5700
(10') (7500) (4800) (8400) (5400) (12300) (8000) (16400) (12600)
1.5 m 3300 2050 3700 2350 5350 3400 8450 5250
(5') (7300) (4600) (8200) (5200) (11800) (7500) (18700) (11500)
0m 3400 2100 3650 2250 5150 3250 8150 4950 *6800 *6800
(0') (7500) (4700) (8000) (5000) (11400) (7100) (18000) (11000) (15000) (15000)
1.5 m 3750 2350 5100 3150 8100 4900 *11400 9500 *7100 *7100
(5') (8300) (5200) (11200) (7000) (17800) (10800) (25100) (21000) (15700) (15700)
3.0 m 4650 2900 5150 3200 8200 4950 *13500 9750 *11750 *11750
(10') (10200) (6400) (11400) (7100) (18000) (11000) (29800) (21500) (26000) (26000)
-4.6 m *6600 4550 *7400 5200 *10600 10150
(15') (14500) (10000) (16300) (11500) (23400) (22400)
Arm length 1840 mm (6')
7.6 m *4450 *4450 *5050 *5050
(25') (9800) (9800) (11100) (11100)
6.1 m *4100 3450 *5000 3800 *5250 *5250
(20') (9100) (7600) (11100) (8300) (11600) (11600)
4.6 m 4150 2700 *5400 3700 *6400 6000 *9100 *9100
(15') (9200) (6000) (11900) (8100) (14100) (13200) (20100) (20100)
3.0 m 3750 2350 5450 3500 *8000 5350
(10') (8300) (5200) (12000) (7700) (17600) (11800)
1.5 m 3600 2250 3650 2300 5250 3300 8250 5000
(5') (8000) (5000) (8100) (5000) (11500) (7300) (18200) (11100)
0m 3750 2300 5100 3150 8050 4850
(0') (8200) (5100) (11200) (7000) (17700) (10700)
1.5 m 4200 2650 5050 3150 8050 4850 *12400 9500
(5') (9300) (5800) (11200) (6900) (17700) (10700) (27400) (21000)
3.0 m 5500 3450 8200 5000 *12100 9800
(10') (12100) (7600) (18100) (11000) (26700) (21600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-27
LIFTING CAPACITY
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *4300 *4300
(20') (5800) (5800) (9500) (9500)
4.6 m *2650 2550 *4650 3000 *4900 4500
(15') (5800) (5600) (10300) (6600) (10800) (9900)
3.0 m *2800 2300 4750 2900 *5850 4250 *7350 6750 *11350 *11350
(10') (6100) (5100) (10500) (6400) (12900) (9400) (16200) (14900) (25000) (25000)
1.5 m *3050 2200 4650 2800 6700 4000 *9300 6250 *7500 *7500
(5') (6700) (4900) (10200) (6200) (14700) (8900) (20500) (13800) (16500) (16500)
0m *3500 2250 4550 2700 6450 3850 10450 5900 *8000 *8000
(0') (7800) (5000) (10000) (5900) (14300) (8400) (23000) (13000) (17700) (17700)
1.5 m 4150 2450 4500 2650 6350 3750 *10250 5800 *11200 *11200 *6800 *6800
(5') (9200) (5400) (9900) (5800) (14000) (8200) (22700) (12700) (24700) (24700) (15000) (15000)
3.0 m 4950 2950 6350 3750 10300 5800 *15600 11500 *10550 *10550
(10') (11000) (6500) (14000) (8200) (22700) (12800) (34400) (25400) (23200) (23200)
4.6 m *6750 4150 *9050 6000 *13050 11900
(15') (14900) (9200) (20000) (13200) (28800) (26200)
Arm length 2410 mm (7'11")
7.6 m *4300 *4300
(25') (9500) (9500)
6.1 m *4100 3500 *4850 4500
(20') (9000) (7700) (10700) (10000)
4.6 m *4150 2850 *4700 2950 *5400 4400 *6200 *6200
(15') (9100) (6300) (10400) (6500) (11900) (9700) (13600) (13600)
3.0 m *4250 2550 4700 2850 *6300 4200 *8100 6600
(10') (9300) (5600) (10400) (6300) (13900) (9200) (17800) (14600)
1.5 m 4100 2450 4600 2750 *6600 3950 *9850 6100
(5') (9000) (5400) (10200) (6100) (14500) (8700) (21800) (13500)
0m 4200 2500 4550 2700 6450 3800 10350 5850 *7350 *7350
(0') (9300) (5500) (10000) (5900) (14200) (8400) (22800) (12900) (16200) (16200)
1.5 m 4650 2750 6350 3750 10250 5800 *12250 11400 *7650 *7650
(5') (10300) (6100) (14000) (8300) (22600) (12700) (27000) (25100) (16900) (16900)
3.0 m 5750 3450 6400 3800 *10250 5850 *14700 11600 *12650 *12650
(10') (12700) (7600) (14200) (8400) (22600) (12900) (32400) (25600) (27900) (27900)
4.6 m *7200 5300 *8100 6100 *11600 *11600
(15') (15900) (11700) (17800) (13500) (25500) (25500)
Arm length 1840 mm (6')
7.6 m *4800 *4800 *5500 *5500
(25') (10600) (10600) (12100) (12100)
6.1 m *4550 3950 *5450 4350 *5700 *5700
(20') (9900) (8800) (12100) (9600) (12600) (12600)
4.6 m *4500 3150 *5900 4250 *7000 6900 *9850 *9850
(15') (9900) (7000) (13000) (9400) (15400) (15200) (21800) (21800)
3.0 m *4650 2800 *6700 4050 *8700 6250
(10') (10200) (6200) (14800) (9000) (19200) (13700)
1.5 m 4500 2650 4550 2700 6500 3850 *10350 5900
(5') (9900) (5900) (10000) (6000) (14300) (8500) (22800) (13000)
0m 4650 2750 6350 3750 10200 5700
(0') (10300) (6100) (14000) (8200) (22500) (12600)
1.5 m 5250 3100 6350 3700 10200 5700 *13350 11350
(5') (11600) (6900) (14000) (8200) (22500) (12600) (29400) (25100)
3.0 m 6850 4050 *9550 5900 *13200 11700
(10') (15100) (8900) (21100) (13000) (29100) (25800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-28
LIFTING CAPACITY
PC200LC-7
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2500 *2500 *3500 *3500
(25') (5600) (5600) (7700) (7700)
6.1 m *2400 *2400 *3950 *3950
(20') (5300) (5300) (8700) (8700)
4.6 m *2400 *2400 *4300 3000 *4500 4500
(15') (5300) (5300) (9400) (6600) (9900) (9900)
3.0 m *2550 2300 *4700 2900 *5350 4250 *6750 *6750 *10450 *10450
(10') (5600) (5100) (10300) (6400) (11800) (9400) (14900) (14900) (23000) (23000)
1.5 m *2800 2200 4650 2800 *6300 4000 *8550 6250 *6950 *6950
(5') (6200) (4900) (10200) (6200) (13900) (8900) (18900) (13800) (15300) (15300)
0m *3250 2250 4550 2700 6450 3850 *9750 5900 *7400 *7400
(0') (7100) (5000) (10000) (5900) (14300) (8400) (21500) (13000) (16400) (16400)
1.5 m *4000 2450 4500 2650 6350 3750 *10100 5800 *10400 *10400 *6300 *6300
(5') (8800) (5400) (9900) (5800) (14000) (8200) (22300) (12700) (22900) (22900) (13900) (13900)
3.0 m 4950 2950 6350 3750 *9750 5800 *14350 11500 *9800 *9800
(10') (11000) (6500) (14000) (8200) (21500) (12800) (31600) (25400) (21600) (21600)
4.6 m *6150 4150 *8300 6000 *12000 11900
(15') (13600) (9200) (18300) (13200) (26400) (26000)
Arm length 2410 mm (7'11")
7.6 m *4000 *4000
(25') (8800) (8800)
6.1 m *3750 3500 *4450 *4450
(20') (8300) (7700) (9800) (9800)
4.6 m *3800 2850 *4350 2950 *4950 4400 *5650 *5650
(15') (8000) (6300) (9600) (6500) (10900) (9700) (12500) (12500)
3.0 m *4050 2550 4700 2850 *5750 4200 *7450 6600
(10') (8900) (5600) (10400) (6300) (12700) (9200) (16400) (14600)
1.5 m 4100 2450 4600 2750 *6600 3950 *9050 6100
(5') (9000) (5400) (10200) (6100) (14500) (8700) (20000) (13500)
0m 4200 2500 4550 2700 6450 3800 *9950 5850 *6800 *6800
(0') (9300) (5500) (10000) (5900) (14200) (8400) (22000) (12900) (15000) (15000)
1.5 m 4650 2750 6350 3750 *10100 5800 *11400 *11400 *7100 *7100
(5') (10300) (7600) (14000) (8300) (22200) (12900) (25100) (25100) (15700) (15700)
3.0 m 5750 3450 6400 3800 *9400 5850 *13500 11600 *11750 *11750
(10') (12100) (7600) (14200) (8400) (20700) (12900) (29800) (25600) (26000) (26000)
4.6 m *6600 5300 *7400 6100 *10600 *10600
(15') (14500) (11700) (16300) (13500) (23400) (23400)
Arm length 1840 mm (6')
7.6 m *4450 *4450 *5050 *5050
(25') (9800) (9800) (11100) (11100)
6.1 m *4100 3950 *5000 4350 *5250 *5250
(20') (9100) (8800) (11100) (9600) (11600) (11600)
4.6 m *4150 3150 *5400 4250 *6400 *6400 *9100 *9100
(15') (9200) (7000) (11900) (9400) (14100) (14100) (20100) (20100)
3.0 m *4400 2800 *6150 4050 *8000 6250
(10') (9700) (6200) (13500) (9000) (17600) (13700)
1.5 m 4500 2650 4550 2700 6500 3850 *9500 5900
(5') (9900) (5900) (10000) (6000) (14300) (8500) (20900) (13000)
0m 4650 2750 6350 3750 *10050 5700
(0') (10300) (6100) (14000) (8200) (22100) (12600)
1.5 m 5250 3100 6350 3700 *9800 5700 *12400 11350
(5') (11600) (6900) (14000) (8200) (21600) (12600) (27400) (25100)
3.0 m *6500 4050 *8750 5900 *12100 11700
(10') (14400) (8900) (19300) (13000) (26700) (25800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-29
LIFTING CAPACITY
3C-30
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:800 mm (31.5") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *5200 *4150
(20') (5800) (5800) (11500) (9100)
4.6 m *2650 2250 4100 2650 *6000 4000
(15') (5850) (5000) (9000) (5900) (13300) (8900)
3.0 m *2800 2000 4000 2550 *5850 3800 *8950 6050 *13700 11650
(10') (6100) (4500) (8800) (5700) (12900) (8400) (19700) (13300) (30200) (25700)
1.5 m *3050 1950 3900 2450 5550 3550 8900 5500 *7500 *7500
(5') (6700) (4300) (8500) (5400) (12300) (7800) (19600) (12200) (16500) (16500)
0m 3150 1950 3750 2350 5350 3350 8500 5200 *8000 *8000
(0') (7000) (4300) (8300) (5200) (11800) (7400) (18700) (11500) (17700) (17700)
1.5 m 3450 2150 3750 2300 5250 3300 8350 5050 *11200 9800 *6800 *6800
(5') (7600) (4700) (8200) (5100) (11600) (7200) (18400) (11200) (24700) (21600) (15000) (15000)
3.0 m 4150 2600 5250 3300 8400 5100 *16050 9950 *10550 *10550
(10') (9100) (5700) (11600) (7200) (18500) (11200) (35400) (21900) (23200) (23200)
4.6 m 5850 3700 8600 5250 *15800 10300
(15') (12900) (8100) (18900) (11600) (35000) (22700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-31
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:800 mm (31.5") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *5200 *4700
(20') (5800) (5800) (11500) (10300)
4.6 m *2650 2600 4650 3050 *6000 4550
(15') (5800) (5700) (10250) (6700) (13300) (10000)
3.0 m *2800 2350 4850 2950 *7050 4300 *8900 6850 *13650 *13450
(10') (6100) (5100) (10700) (6500) (15500) (9500) (19700) (15100) (30100) (29700)
1.5 m *3050 2250 4700 2800 6750 4050 11000 6300 *7500 *7500
(5') (6700) (4900) (10400) (6200) (14900) (9000) (24200) (13900) (16500) (16500)
0m 3500 2250 4600 2750 6550 3850 10550 5950 *8000 *8000
(0') (7800) (4900) (10100) (6000) (14500) (8500) (23300) (13200) (17700) (17700)
1.5 m 4200 2500 4550 2700 6450 3750 10400 5850 *11200 11200 *6800 *6800
(5') (9300) (5500) (10000) (5900) (14200) (8300) (22900) (12900) (24700) (24700) (15000) (15000)
3.0 m 5050 3000 6450 3800 10450 5850 *16050 11600 *10550 *10550
(10') (11100) (6600) (14200) (8350) (23000) (12900) (35400) (25600) (23200) (23200)
4.6 m 7150 4200 10650 6050 *15800 12000
(15') (15800) (9300) (23500) (13300) (34900) (26400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-32
LIFTING CAPACITY
3C-33
LIFTING CAPACITY
3C-34
LIFTING CAPACITY
3C-35
LIFTING CAPACITY
PC220-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *2900 *2900 *3900 *3900
(25') (6400) (6400) (8700) (8700)
6.1 m *2750 *2750 *3700 3500 *4100 *4100
(20') (6100) (6100) (8200) (7800) (9000) (9000)
4.6 m *2800 2750 *4600 3450 *4800 *4800
(15') (6200) (6000) (10100) (7600) (10600) (10600)
3.0 m *2950 2450 4900 3350 *5900 4900 *7450 *7450 *11800 *11800
(10') (6500) (5500) (10800) (7400) (13000) (10800) (17900) (17900) (26000) (26000)
1.5 m *3250 2350 4750 3200 6850 4600 *9700 7150 *6850 *6850
(5') (7200) (5200) (10400) (7000) (15100) (10100) (21400) (15700) (15100) (15100)
0m 3650 2400 4600 3050 6550 4350 10500 6700 *7800 *7800
(0') (8100) (5300) (10100) (6700) (14500) (9600) (23200) (14800) (17100) (17100)
1.5 m 4000 2600 4550 3000 6450 4200 10300 6550 *11150 *11150 *6900 *6900
(5') (8800) (5800) (10000) (6600) (14200) (9300) (22700) (14400) (24600) (24600) (15200) (15200)
3.0 m 4700 3100 6400 4200 10350 6550 *16050 13100 *10750 *10750
(10') (10400) (6900) (14200) (9300) (22800) (14500) (35400) (28900) (23700) (23700)
4.6 m 6500 4300 6600 4350 *10400 6750 *15200 13500
(15') (14300) (9500) (14500) (9600) (23000) (14900) (33500) (29800)
Arm length 2500 mm (8'2")
7.6 m *4600 *4600 *4650 *4650
(25') (10100) (10100) (10200) (10200)
6.1 m *4400 3750 *4650 *4650
(20') (9700) (8300) (10300) (10300)
4.6 m *4450 3100 4950 3350 *5350 5050 *6100 *6100
(15') (9800) (6800) (10900) (7400) (11700) (11100) (13500) (13500)
3.0 m 4100 2750 4800 3250 *6350 4750 8250 7500
(10') (9100) (6100) (10600) (7200) (14000) (10500) (18200) (16600)
1.5 m 3950 2600 4650 3100 6700 4450 *10300 6900
(5') (8700) (5800) (10300) (6900) (14800) (9900) (22700) (15200)
0m 4050 2700 4550 3000 6450 4250 10300 6550 *7250 *7250
(0') (9000) (5900) (10000) (6600) (14300) (9400) (22800) (14500) (16000) (16000)
1.5 m 4500 2950 4500 3000 6400 4200 10200 6450 *12450 *12450 *8000 *8000
(5') (9900) (6500) (10000) (6600) (14100) (9200) (22500) (14300) (27400) (27400) (17700) (17700)
3.0 m 5500 3650 6450 4250 10350 6550 *16450 13100 *13150 *13150
(10') (12100) (8000) (14200) (9300) (22800) (14500) (36300) (28900) (29000) (29000)
4.6 m *8000 5500 *9350 6650 *13700 13650
(15') (17600) (12100) (20600) (14700) (30200) (30100)
Arm length 2000 mm (6'7")
7.6 m *4750 *4750
(25') (10500) (10500)
6.1 m *4500 4100 *5200 5100
(20') (9900) (9100) (11400) (11300)
4.6 m *4550 3300 *5800 4950 *6850 *6850 *9750 *9750
(15') (10000) (7300) (12800) (10900) (15100) (15100) (21500) (21500)
3.0 m 4400 2950 4750 3200 *6750 4650 *8850 7100
(10') (9700) (6500) (10400) (7000) (14900) (10300) (19500) (15700)
1.5 m 4250 2800 4600 3050 6600 4400 10500 6700
(5') (9400) (6200) (10200) (6800) (14600) (9700) (23100) (14800)
0m 4400 2900 4550 3000 6400 4200 10200 6450
(0') (9700) (6400) (10000) (6600) (14200) (9300) (22500) (14200)
1.5 m 4900 3250 6350 4150 10200 6450 *13000 12900
(5') (10800) (7100) (14100) (9200) (22500) (14200) (28600) (28400)
3.0 m 6200 4100 6500 4300 10400 6600 *15350 13250
(10') (13700) (9100) (14300) (9400) (22900) (14600) (33900) (29200)
4.6 m *8150 6800 *8350 7700
(15') (17900) (15000) (18400) (15500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-36
LIFTING CAPACITY
3C-37
LIFTING CAPACITY
PC220LC-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *2900 *2900 *3900 *3900
(25') (6400) (6400) (8700) (8700)
6.1 m *2750 *2750 *3700 *3700 *4100 *4100
(20') (6100) (6100) (8200) (8200) (9000) (9000)
4.6 m *2800 *2800 *4600 4000 *4800 *4800
(15') (6200) (6200) (10100) (8800) (10600) (10600)
3.0 m *2950 2900 *5150 3850 *5900 5650 *7450 *7450 *11800 *11800
(10') (6500) (6400) (11400) (8500) (13000) (12400) (16500) (16500) (26000) (26000)
1.5 m *3250 2800 *5800 3700 *7050 5350 *9700 8300 *6850 *6850
(5') (7200) (6200) (12800) (8200) (15500) (11700) (21400) (18300) (15100) (15100)
0m *3750 2850 5650 3600 *8000 5100 *11200 7900 *7800 *7800
(0') (8300) (6300) (12500) (7900) (17600) (11200) (24700) (17400) (17100) (17100)
1.5 m *4600 3100 5600 3500 7950 4950 *11800 7700 *11150 11150 *6900 *6900
(5') (10100) (6800) (12300) (7800) (17500) (10900) (26100) (17000) (24600) (24600) (15200) (15200)
3.0 m 5800 3650 7950 4950 *11650 7750 *16050 15700 *10750 *10750
(10') (12800) (8100) (17500) (10900) (25700) (17000) (35400) (34600) (23700) (23700)
4.6 m *7250 5050 *7400 5100 *10400 7950 *15200 *15200
(15') (16000) (11100) (16300) (1130) (23000) (17500) (33500) (33500)
Arm length 2500 mm (8'2")
7.6 m *4600 *4600 *4650 *4650
(25') (10100) (10100) (10200) (10200)
6.1 m *4400 4350 *4650 *4650
(20') (9700) (9600) (10300) (10300)
4.6 m *4450 3600 *5000 3900 *5350 *5350 *6100 *6100
(15') (9800) (7900) (11100) (8600) (11700) (11700) (13500) (13500)
3.0 m *4750 3250 *5500 3800 *6350 5500 *8250 *8250
(10') (10500) (7100) (12100) (8400) (14000) (12100) (18200) (18200)
1.5 m 4850 3100 5700 3650 *7400 5200 *10300 8050
(5') (10800) (5800) (12600) (8000) (16300) (11500) (22700) (17800)
0m 5000 3150 5600 3550 8000 5000 *11450 7700 *7250 *7250
(0') (11100) (7000) (12400) (7800) (17600) (11000) (25300) (17000) (16000) (16000)
1.5 m 5550 3500 5550 3500 7900 4900 *11800 7650 *12450 *12450 *8000 *8000
(5') (12200) (7700) (12300) (7700) (17400) (10800) (26000) (16800) (27400) (27400) (17700) (17700)
3.0 m 6800 4250 7950 4950 *11250 7700 *16450 15700 *13150 *13150
(10') (14900) (9400) (17600) (10900) (24900) (17000) (36300) (34700) (29000) (29000)
4.6 m *8000 6400 *9350 7800 *13700 *13700
(15') (17600) (14100) (20600) (17200) (30200) (30200)
Arm length 2000 mm (6'7")
7.6 m *4750 *4750
(25') (10500) (10500)
6.1 m *4500 *4500 *5200 *5200
(20') (9900) (9900) (11400) (11400)
4.6 m *4550 3850 *5800 5700 *6850 *6850 *9750 *9750
(15') (10000) (8500) (12800) (12500) (15100) (15100) (21500) (21500)
3.0 m *4800 3450 *5800 3700 *6750 5400 *8850 8300
(10') (10600) (7600) (12800) (8200) (14900) (11900) (19500) (18300)
1.5 m 5200 3300 5650 3600 *7700 5100 *10800 7850
(5') (11500) (7300) (12500) (7900) (17000) (11300) (23800) (17300)
0m 5400 3400 5600 3500 7950 4950 *11650 7600
(0') (11900) (7500) (12300) (7700) (17500) (10900) (25700) (16800)
1.5 m 6050 3800 7900 4900 *11650 7600 *13000 *13000
(5') (13300) (8400) (17400) (10800) (25700) (16800) (28600) (28600)
3.0 m *7550 4800 7850 5000 *10850 7750 *15350 *15350
(10') (16600) (10600) (17300) (11100) (23900) (17100) (33900) (33900)
4.6 m *8150 7950 *8350 8200
(15') (17900) (17500) (18400) (18000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-38
LIFTING CAPACITY
3C-39
LIFTING CAPACITY
3C-40
LIFTING CAPACITY
PC228US-3
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
6.0 m 2700* 2350 3250* 2450 3950* 3800
(20') (6000) (5150) (7200) (5400) (8750) (8450)
4.5 m 2750* 1950 3950 2450 4650* 3700 5000* 5000*
(15') (6050) (4300) (8700) (5400) (10200) (8150) (11000) (11000)
3m 2900* 1750 3850 2350 5600* 3500 7100* 5600 11050* 10700
(10') (6400) (3850) (5450) (5150) (12450) (7700) (15650) (12350) (24350) (23650)
1.5 m 2900 1700 3750 2250 5400 3250 8550 5100 6850* 6850*
(5') (6400) (3750) (8250) (4950) (11850) (7150) (18800) (11200) (15050) (15050)
0m 2950 1700 3650 2150 5200 3050 8250 4750 7650* 7650*
(0') (6500) (3750) (8050) (4700) (11450) (6700) (18150) (10450) (16900) (16900)
1.5 m 3250 1850 3600 2100 5050 2950 8100 4650 10800* 9000 6700* 6700*
(5') (7150) (4050) (7900) (4600) (11100) (6500) (17850) (10250) (23750) (19800) (14750) (14750)
3.0 m 3850 2250 5100 2950 8100 4650 15550* 9150 10300* 10300*
(10') (8450) (4950) (11200) (6500) (17850) (10250) (34250) (20150) (22650) (22650)
4.5 m 5350 3200 8300 4800 14500* 9500
(15') (11750) (7050) (18250) (10550) (31900) (20900)
PC228USLC-3
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
6.0 m 2700* 2700* 3250* 2950 3950* 3950*
(20') (6000) (6000) (7200) (6500) (8750) (8750)
4.5 m 2750* 2400 4500* 2900 4650* 4300 5000* 5000*
(15') (6050) (5250) (9900) (6350) (10200) (9450) (11000) (11000)
3m 2900* 2150 4850 2800 5650* 4150 7100* 6500 11050* 11050*
(10') (6400) (4700) (10700) (6150) (12500) (9150) (15650) (14400) (24350) (24350)
1.5 m 3150* 2050 4750 2700 6750* 3900 9200* 6050 6850* 6850*
(5') (6900) (4500) (10450) (6000) (14850) (8550) (20250) (13300) (15050) (15050)
0m 3650* 2100 4600 2600 6600 3700 10600 5700 7650* 7650*
(0') (8050) (4600) (10100) (5700) (14550) (8150) (23400) (12550) (16900) (16900)
1.5 m 4100 2300 4550 2550 6500 3600 10450 5600 10800* 10800* 6700* 6700*
(5') (9000) (5050) (10000) (5600) (14300) (7900) (23100) (12300) (23750) (23750) (14750) (14750)
3.0 m 4900 2750 6500 3600 10450 5600 15550* 11200 10300* 10300*
(10') (10800) (6050) (14300) (7900) (23100) (12300) (34250) (24650) (22650) (22650)
4.5 m 6800 3850 9950* 5800 14500* 11550
(15') (14950) (8450) (21900) (12750) (31900) (25400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-41
LIFTING CAPACITY
PC230NHD-7
Conditions:
One piece boom: 5700 mm (18'8"), Bucket (SAE): 0.96 m3 (1.26 cu.yd), Shoes: 550 mm (22") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
6.0 m 2650* 2650* 3550* 2900 4300* 4300*
(20') (5800) (5800) (7800) (6400) (9400) (9400)
4.5 m 2650* 2250 4650* 2850 4900* 4250 5500* 5500*
(15') (5800) (4900) (10200) (6200) (10800) (9300) (12100) (12100)
3.0 m 2800* 2050 4900 2700 5850* 3950 7400* 6200 11550* 11550*
(10') (6100) (4500) (10800) (5900) (12800) (8700) (16300) (13600) (25400) (25400)
1.5 m 3050* 1950 4750 2600 6800 3700 9300* 5650 6400* 6400*
(5') (6700) (4300) (10400) (5700) (14900) (8100) (20400) (12400) (14100) (14100)
0m 3450* 2000 4650 2450 6550 3450 10450 5250 7300* 7300*
(0') (7600) (4400) (10200) (5400) (14400) (7600) (23000) (11500) (16000) (16000)
1.5 m 4100 2150 4600 2400 6450 3350 10250 5150 10550* 9650 6400* 6400*
(5') (9000) (4700) (10100) (5300) (14200) (7300) (22500) (11300) (23200) (21200) (14100) (14100)
3.0 m 4850 2550 6450 3400 10300 5150 15400* 9850 10150* 10150*
(10') (10600) (5600) (14200) (7500) (22600) (11300) (33900) (21600) (22300) (22300)
4.5 m 6350* 3550 9050 5350 13000* 10250
(15') (13900) (7800) (19900) (11700) (28600) (22500)
Arm length 2400 mm (7'10")
6.0 m 4150* 3100 4900* 4350
(20') (9100) (6800) (10800) (9500)
4.5 m 4150* 2550 5000 2800 5450* 4200 6300* 6300*
(15') (9100) (5600) (11000) (6100) (12000) (9200) (13800) (13800)
3.0 m 4200 2300 4900 2750 6350* 3950 8250* 6100
(10') (9200) (5000) (10800) (6000) (13900) (8700) (18100) (13400)
1.5 m 4100 2200 4800 2600 6800 3700 10000* 5600
(5') (9000) (4800) (10500) (5700) (14900) (8100) (22000) (12300)
0m 4200 2250 4700 2550 6600 3550 10500 5300
(0') (9200) (4900) (10300) (5600) (14500) (7800) (23100) (11600)
1.5 m 4600 2500 4650 2500 6550 3450 10400 5250 11250* 9900 6900* 6900*
(5') (10100) (5500) (10200) (5500) (14500) (9600) (22900) (9300) (24700) (21800) (15200) (15200)
3.0 m 5600 3050 6600 3500 10300* 5350 14700* 10150 12000* 12000*
(10') (12300) (6700) (14500) (7700) (22600) (11700) (32300) (22300) (26400) (26400)
4.5 m 6750* 4500 8250* 5600 11700* 10600
(15') (14800) (9900) (18100) (12300) (25700) (23300)
Arm length 1800 mm (5'11")
6.0 m 4600* 3550 5500* 4200 5850* 5850*
(20') (10100) (7800) (12100) (9200) (12800) (12800)
4.5 m 4600* 2850 6000* 4100 7150* 6450 10200* 10200*
(15') (10100) (6200) (13200) (9000) (15700) (14200) (22400) (22400)
3.0 m 4650 2550 4850 2650 6800* 3850 9000* 5850
(10') (10200) (5600) (10600) (5800) (14900) (8400) (19800) (12800)
1.5 m 4500 2450 4750 2600 6700 3650 10450* 5400
(5') (9900) (5400) (10400) (5700) (14700) (8000) (23000) (11900)
0m 4650 2500 4700 2550 6550 3500 10350 5200
(0') (10200) (5500) (10300) (5600) (14400) (7700) (22700) (11400)
1.5 m 5250 2800 6550 3450 10350 5200 12250* 9950
(5') (11500) (6100) (14400) (7600) (22700) (11400) (26900) (21900)
3.0 m 6650 3600 6700 3600 9650* 5400 13200* 10250
(10') (14600) (7900) (14700) (7900) (21200) (11900) (29000) (22500)
4.5 m
(15')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-42
LIFTING CAPACITY
PC230NHD-7
Conditions:
Two piece boom: 5500 mm (18'1"), Bucket (SAE): 0.96 m3 (1.26 cu.yd), Shoes: 550 mm (22") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
6.0 m 2900* 2500 4300* 2900 4350* 4350*
(20') (6400) (5500) (9400) (6400) (9500) (9500)
4.5 m 2850* 2100 4550* 2800 4950* 4250
(15') (6200) (4600) (10000) (6100) (10900) (9300)
3.0 m 3000* 1900 4950 2700 5850* 3950 7600* 6250
(10') (6600) (4200) (10900) (5900) (12800) (8700) (16700) (13700)
1.5 m 3200* 1800 4800 2550 6800* 3700 9350* 5650
(5') (7000) (3900) (10500) (5600) (14900) (8100) (20500) (12400)
0m 3600* 1850 4650 2450 6600 3500 10500* 5300 6450* 6450*
(0') (7900) (4000) (10200) (5400) (14500) (7700) (23100) (11600) (14200) (14200)
1.5 m 3900 2050 4600 2400 6500 3400 10400 5200 10000* 9950*
(5') (8600) (4500) (10100) (5300) (14300) (7500) (22900) (11400) (22000) (21900)
3.0 m 4650 2450 6500 3400 10450 5250
(10') (10200) (5400) (14300) (7500) (23000) (11500)
Arm length 2400 mm (7'10")
6.0 m 4850* 2900 4900* 4400
(20') (10600) (6400) (10800) (9700)
4.5 m 4400 2400 5000* 2850 5500* 4200 6600* 6600*
(15') (9700) (5300) (11000) (6200) (12100) (9200) (14500) (14500)
3.0 m 4050 2200 4950 2750 6350* 3950 8400* 6150
(10') (8900) (4800) (10900) (6000) (13900) (8700) (18500) (13500)
1.5 m 3950 2100 4850 2650 6900 3750 10050* 5650
(5') (8700) (4600) (10600) (5800) (15200) (8200) (22100) (12400)
0m 4050 2150 4750 2550 6700 3550 10650 5400
(0') (8900) (4700) (10400) (5600) (14700) (7800) (23400) (11900)
1.5 m 4450 2400 4750 2550 6550 3500 10600 5350
(5') (9800) (5300) (10400) (5600) (14400) (7700) (23300) (11700)
3.0 m 6700 3550
(10') (14700) (7800)
Arm length 1800 mm (5'11")
6.0 m 4950* 3350 5450* 4250
(20') (10900) (7300) (12000) (9300)
4.5 m 4900* 2750 5000 2750 6000* 4100 7400* 6550
(15') (10800) (6000) (11000) (6000) (13200) (9000) (16300) (14400)
3.0 m 4500 2450 4900 2700 6800* 3900 9200* 5950
(10') (9900) (5400) (10800) (5900) (14900) (8600) (20200) (13100)
1.5 m 4400 2350 4800 2600 6850 3700 10550* 5500
(5') (9700) (5100) (10500) (5700) (15000) (8100) (23200) (12100)
0m 4550 2450 4750 2550 6700 3550 10600 5400
(0') (10000) (5400) (10400) (5600) (14700) (7800) (23300) (11900)
1.5 m 5100 2750 6650 3550 10650 5400
(5') (11200) (6000) (14600) (7800) (23400) (11900)
3.0 m
(10')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-43
LIFTING CAPACITY
PC240LC-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.01 m3 (1.32 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3000 *3000 *4450 4250 *4900 *4900
(20') (6600) (6600) (9800) (9400) (10800) (10800)
4.5 m *3050 *3050 *5550 4200 *5800 *5800
(15') (6700) (6700) (12200) (9200) (12800) (12800)
3.0 m *3200 2950 *6250 4050 *7150 5900 *9050 *9050 *14450 *14450
(10') (7100) (6500) (13700) (8900) (15700) (13000) (20000) (20000) (31800) (31800)
1.5 m *3550 2850 6050 3850 *8550 5550 *11700 8650 *6900 *6900
(5') (7800) (6200) (13300) (8500) (18800) (12200) (25800) (19000) (15200) (15200)
0m *4050 2900 5900 3700 8450 5250 *13500 8150 *8100 *8100
(0') (8900) (6400) (13000) (8200) (18600) (11600) (29700) (18000) (17900) (17900)
1.5 m *4950 3100 5800 3650 8300 5150 13550 8000 *11650 *11650 *7350 *7350
(5') (10900) (6900) (12800) (8000) (18300) (11300) (29900) (17600) (25700) (25700) (16200) (16200)
3.0 m 5850 3700 8250 5100 13600 8000 *16750 16350 *11350 *11350
(10') (12900) (8100) (18200) (11300) (30000) (17700) (37000) (36100) (25100) (25100)
4.5 m 7950 5000 8450 5300 *12650 8200 *18350 16850
(15') (17600) (11000) (18600) (11500) (27900) (18100) (40500) (37100)
Arm length 3500 mm (11'6")
6.0 m *2350 *2350 *4050 *4050
(20') (5200) (5200) (9000) (9000)
4.5 m *2400 *2400 *5050 4200 *5200 *5200
(15') (5300) (5300) (11200) (9300) (11500) (11500)
3.0 m *2550 *2550 *5800 4050 *6550 5950 *8050 *8050 *11850 *11850
(10') (5600) (5600) (12800) (8900) (14400) (13100) (17800) (17800) (26100) (26100)
1.5 m *2850 2650 6050 3850 *8000 5550 *10850 8750 *10850 *10850
(5') (6200) (5800) (13300) (8500) (17600) (12200) (24000) (19300) (23900) (23900)
0m *3300 2650 5850 3700 8400 5250 *12900 8150 *9500 *9500 *4300 *4300
(0') (7300) (5900) (12900) (8100) (18600) (11600) (28500) (18000) (20900) (20900) (9400) (9400)
1.5 m *4050 2850 5750 3600 8150 5000 13500 7900 *11850 *11850 *7350 *7350
(5') (8900) (6300) (12600) (7900) (18000) (11000) (29700) (17400) (26100) (26100) (16200) (16200)
3.0 m 5350 3350 5700 3550 8150 5000 13450 7850 *15650 *15650 *10600 *10600
(10') (11800) (7400) (12600) (7900) (18000) (11100) (29700) (17400) (34500) (34500) (23300) (23300)
4.5 m 7050 4400 8250 5100 *13100 8000 *19350 16500 *14400 *14400
(15') (15500) (9700) (18200) (11300) (28900) (17700) (42600) (36300) (31800) (31800)
Arm length 2500 mm (8'2")
6.0 m *4750 4400 *5650 *5650
(20') (10500) (9700) (12500) (12500)
4.5 m *4850 3650 *6100 4150 *6500 6100 *7500 *7500
(15') (10700) (8100) (13500) (9100) (14300) (13500) (16500) (16500)
3.0 m 5150 3300 6200 4000 *7750 5800 *10150 9100
(10') (11400) (7300) (13600) (8800) (17100) (12800) (22300) (20100)
1.5 m 5000 3200 6000 3850 8650 5450 *12550 8450
(5') (11000) (7000) (13300) (8500) (19100) (12100) (27700) (18600)
0m 5150 3250 5900 3750 8400 5250 13700 8100
(0') (11300) (7200) (13000) (8200) (18500) (11600) (30200) (17800)
1.5 m 5650 3550 5850 3700 8300 5150 13600 8000 *13000 *13000 *8550 *8550
(5') (12500) (7900) (12900) (8100) (18300) (11400) (29900) (17600) (28700) (28700) (18800) (18800)
3.0 m 6850 4350 8350 5200 *13700 8100 *19850 16550 *13900 *13900
(10') (15200) (9600) (18400) (11500) (30200) (17900) (43800) (36500) (30700) (30700)
4.5 m *9550 6400 *11700 8400 *16750 *16750
(15') (21000) (14100) (25800) (18500) (36900) (36900)
Arm length 2000 mm (6'7")
6.0 m *4850 4800 *6300 6200
(20') (10700) (10600) (13900) (13600)
4.5 m *4950 3950 *5600 4050 *7100 6000 *8400 *8400 *12000 *12000
(15') (10900) (8700) (12400) (8900) (15600) (13200) (18600) (18600) (26500) (26500)
3.0 m *5250 3550 6100 3950 *8250 5700 *11050 8850
(10') (11600) (7800) (13500) (8700) (18200) (12500) (24300) (19600)
1.5 m 5350 3400 5950 3800 8550 5400 *13200 8250
(5') (11800) (7500) (13200) (8400) (18900) (11900) (29100) (18200)
0m 5550 3500 5900 3700 8350 5200 13600 8000
(0') (12200) (7700) (13000) (8200) (18400) (11500) (30000) (17700)
1.5 m 6200 3900 8300 5150 13600 8000 *13550 *13550
(5') (13600) (8600) (18300) (11400) (30000) (17700) (29900) (29900)
3.0 m 7800 4900 8450 5250 *13200 8150 *18650 16750
(10') (17200) (10800) (18600) (11600) (29100) (18000) (41100) (36900)
4.5 m *9750 7850 *10450 8550
(15') (21500) (17300) (23100) (18900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-44
LIFTING CAPACITY
PC240NLC-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.01 m3 (1.32 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3000 *3000 *4450 3750 *4900 *4900
(20') (6600) (6600) (9800) (8300) (10800) (10800)
4.5 m *3050 2800 *5550 3700 *5800 5500
(15') (6700) (6200) (12200) (8100) (12800) (12100)
3.0 m *3200 2550 5600 3550 *7150 5150 *9050 8200 *14450 *14450
(10') (7100) (5600) (12300) (7800) (15700) (11400) (20000) (18100) (31800) (31800)
1.5 m *3550 2450 5400 3350 7800 4850 *11700 7500 *6900 *6900
(5') (7800) (5400) (11900) (7400) (17200) (10700) (25800) (16500) (15200) (15200)
0m *4050 2450 5250 3200 7500 4550 12150 7050 *8100 *8100
(0') (8900) (5500) (11600) (7100) (16500) (10100) (26800) (15600) (17900) (17900)
1.5 m 4400 2700 5150 3150 7350 4450 11950 6900 *11650 *11650 *7350 *7350
(5') (9700) (5900) (11400) (6900) (16200) (9800) (26300) (15200) (25700) (25700) (16200) (16200)
3.0 m 5200 3200 7350 4450 11950 6900 *16750 13800 *11350 *11350
(10') (11500) (7000) (16200) (9800) (26400) (15200) (37000) (30500) (25100) (25100)
4.5 m 7100 4350 7500 4600 12200 7100 *18350 14250
(15') (15600) (9600) (16600) (10100) (25900) (15700) (40500) (31400)
Arm length 3500 mm (11'6")
6.0 m *2350 *2350 *4050 3800
(20') (5200) (5200) (9000) (8400)
4.5 m *2400 *2400 *5050 3700 *5200 *5200
(15') (5300) (5300) (11200) (8200) (11500) (11500)
3.0 m *2550 2350 5600 3550 *6550 5200 *8050 *8050 *11850 *11850
(10') (5600) (5200) (12300) (7800) (14400) (11500) (17800) (17800) (26100) (26100)
1.5 m *2850 2250 5400 3350 7850 4850 *10850 7600 *10850 *10850
(5') (6200) (5000) (11900) (7400) (17300) (10700) (24000) (16800) (23900) (23900)
0m *3300 2300 5200 3150 7500 4550 12150 7050 *9500 *9500 *4300 *4300
(0') (7300) (5000) (11500) (7000) (16500) (10000) (26800) (15500) (20900) (20900) (9400) (9400)
1.5 m *4050 2450 5100 3050 7200 4300 11850 6800 *11850 *11850 *7350 *7350
(5') (8900) (5400) (11200) (6800) (15900) (9500) (26100) (15000) (26100) (26100) (16200) (16200)
3.0 m 4750 2850 5100 3050 7250 4300 11800 6750 *15650 13550 *10600 *10600
(10') (10500) (6300) (11200) (6700) (15900) (9500) (26000) (14900) (34500) (29900) (23300) (23300)
4.5 m 6250 3800 7350 4400 12000 6900 *19350 13900 *14400 *14400
(15') (13800) (8400) (16200) (9700) (26400) (15200) (42600) (30700) (31800) (31800)
Arm length 2500 mm (8'2")
6.0 m *4750 3850 *5650 5600
(20') (10500) (8500) (12500) (12300)
4.5 m *4850 3200 5700 3600 *6500 5400 *7500 *7500
(15') (10700) (7100) (12500) (8000) (14300) (11900) (16500) (16500)
3.0 m 4600 2850 5550 3500 *7750 5050 *10150 8000
(10') (10200) (6300) (12200) (7700) (17100) (11200) (22300) (17600)
1.5 m 4450 2750 5350 3350 7700 4750 12450 7300
(5') (9800) (6100) (11800) (7400) (17000) (10500) (27500) (16200)
0m 4550 2800 5250 3200 7450 4550 12050 7000
(0') (10100) (6200) (11600) (7100) (16500) (10000) (26600) (15400)
1.5 m 5050 3100 5200 3200 7350 4450 11950 6900 *13000 *13000 *8550 *8550
(5') (11100) (6800) (11500) (7000) (16200) (9800) (26300) (15200) (28700) (28700) (18800) (18800)
3.0 m 6100 3750 7400 4500 12050 7000 *19850 14000 *13900 *13900
(10') (13500) (8300) (16400) (9900) (26600) (15400) (43800) (30900) (30700) (30700)
4.5 m 9150 5550 *11700 7250 *16750 14500
(15') (20100) (12200) (25800) (16000) (36900) (32000)
Arm length 2000 mm (6'7")
6.0 m *4850 4250 *6300 5450
(20') (10700) (9300) (13900) (12100)
4.5 m *4950 3450 5600 3550 *7100 5300 *8400 *8400 *12000 *12000
(15') (10900) (7600) (12400) (7800) (15600) (11600) (18600) (18600) (26500) (26500)
3.0 m 4950 3100 5450 3450 7950 5000 *11050 7750
(10') (10900) (6800) (12100) (7600) (17500) (11000) (24300) (17100)
1.5 m 4800 2950 5350 3300 7650 4700 12250 7150
(5') (10500) (6500) (11800) (7300) (16800) (10400) (27000) (15800)
0m 4950 3050 5250 3200 7450 4500 11950 6900
(0') (10900) (6700) (11600) (7100) (16400) (10000) (26400) (15200)
1.5 m 5500 3400 7400 4450 11950 6900 *13550 *13550
(5') (12200) (7500) (16300) (9900) (26300) (15200) (29900) (29900)
3.0 m 6950 4250 7500 4550 12150 7050 *18650 14150
(10') (15300) (9400) (16500) (10100) (26800) (15600) (41100) (31200)
4.5 m *9750 6850 *10450 7450
(15') (21500) (15100) (23100) (16400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-45
LIFTING CAPACITY
PC270-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.26 m3 (1.65 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3250 *3250
(25') (7200) (7200)
6.1 m *3100 *3100 *4250 *4250 *6250 *6250
(20') (6900) (6900) (9400) (9400) (13700) (13700)
4.6 m *3150 *3150 *6200 4250 *7100 6400
(15') (7000) (7000) (13700) (9400) (15700) (14100)
3.0 m *3350 3050 6100 4100 *8400 6050 *10750 9750 *16950 *16950
(10') (7400) (6800) (13500) (9100) (18500) (13400) (23700) (21500) (37300) (37300)
1.5 m *3700 2950 5950 3950 8600 5700 *13300 8950 *8600 *8600
(5') (8200) (6500) (13100) (8700) (18900) (12600) (29300) (19800) (19000) (19000)
0m *4300 3000 5800 3800 8300 5450 13400 8500 *9800 *9800
(0') (9500) (6600) (12700) (8400) (18300) (12000) (29500) (18700) (21600) (21600)
1.5 m 5050 3300 5700 3750 8150 5300 13200 8300 *13950 *13950 *8650 *8650
(5') (11100) (7300) (12600) (8200) (17900) (11700) (29100) (18300) (30800) (30800) (19100) (19100)
3.0 m 6000 3950 8150 5300 13200 8350 *20100 17150 *13400 *13400
(10') (13200) (8700) (17900) (11700) (29100) (18400) (44300) (37800) (29600) (29600)
4.6 m 8350 5500 *11950 8600 *16950 *16950
(15') (18400) (12100) (26400) (18900) (37400) (37400)
Arm length 2500 mm (8'2")
7.6 m *5250 *5250 *5350 *5350
(25') (11500) (11500) (11900) (11900)
6.1 m *5050 4650 *7000 6500
(20') (11100) (10300) (15400) (14300)
4.6 m *5100 3850 6200 4200 *7800 6300 *9200 *9200
(15') (11300) (8500) (13700) (9300) (17200) (13800) (20300) (20300)
3.0 m 5200 3450 6050 4050 8850 5950 *11800 9500
(10') (11500) (7600) (13400) (9000) (19500) (13100) (26000) (20900)
1.5 m 5050 3350 5900 3900 8500 5650 13700 8800
(5') (11100) (7300) (13000) (8700) (18700) (12400) (30300) (19400)
0m 5200 3400 5800 3800 8250 5400 13300 8400 *9250 *9250
(0') (11500) (7500) (12800) (8400) (18200) (11900) (29300) (18600) (20400) (20400)
1.5 m 5750 3800 5750 3800 8150 5350 13200 8350 *15650 15650
(5') (12700) (8300) (12700) (8300) (18000) (11700) (29100) (18400) (34500) (34500)
3.0 m 7100 4650 8200 5400 13300 8450 *19200 17300
(10') (15600) (10300) (18100) (11900) (29400) (18600) (42400) (38200)
4.6 m *8950 7150 *10350 8500
(15') (19800) (15700) (22800) (18800)
Arm length 3500 mm (11'6")
7.6 m *2450 *2450
(25') (5500) (5500)
6.1 m *2400 *2400 *4000 *4000
(20') (5300) (5300) (8800) (8800)
4.6 m *2450 *2450 *5450 4300 *6500 6450
(15') (5400) (5400) (12000) (9500) (14300) (14200)
3.0 m *2650 *2650 6150 4100 *7800 6100 *9800 *9800 *14400 *14400
(10') (5800) (5800) (13500) (9100) (17200) (13500) (21600) (21600) (31800) (31800)
1.5 m *2950 2750 5950 3950 8600 5750 *12500 9100 *13350 *13350
(5') (6500) (6100) (13100) (8700) (19000) (12600) (27600) (20000) (29400) (29400)
0m *3450 2800 5750 3750 8250 5400 13400 8500 *11400 *11400 *5050 *5050
(0') (7600) (6200) (12700) (8300) (18200) (11900) (29600) (18800) (25200) (25200) (11200) (11200)
1.5 m *4300 3000 5650 3650 8050 5250 13100 8250 *14100 *14100 *8600 *8600
(5') (9500) (6700) (12400) (8100) (17800) (11500) (28900) (18200) (31100) (31100) (19000) (19000)
3.0 m 5500 3550 5650 3650 8000 5200 13050 8200 *18700 16850 *12450 *12450
(10') (12100) (7900) (12400) (8100) (17700) (11500) (28800) (18100) (41200) (37200) (27400) (27400)
4.6 m 7350 4800 8150 5300 *12750 8400 *18400 17300
(15') (16200) (10600) (18000) (11700) (28200) (18500) (40600) (38100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-46
LIFTING CAPACITY
PC270LC-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.25 m3 (1.63 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3250 *3250
(25') (7200) (7200)
6.1 m *3100 *3100 *4250 *4250 *6250 *6250
(20') (6900) (6900) (9400) (9400) (13700) (13700)
4.6 m *3150 *3150 *6200 4500 *7100 6750
(15') (7000) (7000) (13700) (10000) (15700) (14800)
3.0 m *3350 3300 *7200 4350 *8400 6400 *10750 10250 *16950 *16950
(10') (7400) (7200) (15900) (9600) (18500) (14100) (23700) (22600) (37300) (37300)
1.5 m *3700 3150 7100 4200 *9700 6050 *13300 9500 *8600 *8600
(5') (8200) (7000) (15600) (9300) (21400) (13300) (29300) (20900) (19000) (19000)
0m *4300 3250 6950 4050 9950 5800 *14800 9000 *9800 *9800
(0') (9500) (7100) (15300) (9000) (22000) (12700) (32600) (19900) (21600) (21600)
1.5 m *5300 3550 6850 4000 9800 5650 *15100 8800 *13950 *13950 *8650 *8650
(5') (11700) (7800) (15100) (8800) (21600) (12400) (33300) (19400) (30800) (30800) (19100) (19100)
3.0 m 7200 4200 9800 5650 *14300 8850 *20100 18100 *13400 *13400
(10') (15900) (9300) (21600) (12400) (31500) (19500) (44300) (39900) (29600) (29600)
4.6 m *8350 5850 *11950 9100 *16950 *16950
(15') (18400) (12900) (26400) (20000) (37400) (37400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-47
LIFTING CAPACITY
PC290LC-7
Conditions: One-piece Boom: 5850 mm (19'2"), Bucket (SAE): 1.16 m3 (1.52 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3100 *3100 *4750 *4750
(20') (6800) (6800) (10450) (10450)
4.5 m *3150 *3150 *6500 4850 *7200 7200
(15') (6900) (6900) (14300) (10650) (15800) (15800)
3.0 m *3350 *3350 6900 4700 *8550 6850 *11000 10900 *17550 *17550
(10') (7350) (7350) (15150) (10300) (18800) (15050) (24200) (23950) (38600) (38600)
1.5 m *3700 3350 6700 4550 9600 6500 *13550 *10150 *8050 *8050
(5') (8100) (7350) (14700) (10000) (21100) (14300) (29800) (22300) (17700) (17700)
0m *4300 3400 6550 4400 9300 6200 15050 9850 *9500 *9500
(0') (9450) (7450) (14400) (9650) (20450) (13600) (33100) (21650) (20900) (20900)
1.5 m *5250 3700 6450 4300 9050 5950 14850 9450 *13600 *13600 *8550 *8550
(5') (11550) (8100) (14200) (9450) (19900) (13100) (32650) (20800) (29900) (29900) (18800) (18800)
3.0 m 6550 4400 9150 6050 *14550 9500 *19500 *19500 *13200 *13200
(10') (14400) (9650) (20100) (13300) (32000) (20900) (42900) (42900) (29000) (29000)
4.5 m *8350 6000 *8750 *12300 9700 *17400 *17400
(15') (18350) (13200) (19250) (27050) (21300) (38250) (38250)
Arm length 3500 mm (11'6")
6.0 m *2400 *2400 *4300 *4300
(20') (5250) (5250) (9450) (9450)
4.5 m *2450 *2450 *5650 4900 *6600 *6600
(15') (5400) (5400) (12400) (10750) (14500) (14500)
3.0 m *2650 *2650 *6850 4700 *7950 6900 *10050 *10050 *14800 *14800
(10') (5800) (5800) (15050) (10300) (17500) (15150) (22100) (22100) (32550) (32550)
1.5 m *2950 *2950 6700 4500 *9350 6500 *12800 10250 *12500 *12500
(5') (6500) (6500) (14700) (9900) (20550) (14300) (28150) (22550) (27500) (27500)
0m *3450 3150 6500 4350 9300 6200 *14600 9650 *11050 *11050 *5000 *5000
(0') (7600) (6900) (14300) (9550) (20450) (13600) (32100) (21200) (24300) (24300) (11000) (11000)
1.5 m *4300 3400 6400 4250 9000 5900 14750 9400 *13750 *13750 *8500 *8500
(5') (9450) (7450) (14050) (9350) (19800) (12950) (32450) (20650) (30250) (30250) (18700) (18700)
3.0 m *5900 4000 6350 4250 8950 5900 14700 9350 *18200 *18200 *12250 *12250
(10') (12950) (8800) (13950) (9350) (19700) (12950) (32300) (20550) (40000) (40000) (26950) (26950)
4.5 m 7950 5300 9150 6050 *13100 9550 *18850 *18850
(15') (17500) (11650) (20100) (13300) (28800) (21000) (41450) (41450)
Arm length 2500 mm (8'2")
6.0 m *5000 *5000 *7050 *7050
(20') (11000) (11000) (15500) (15500)
4.5 m *5150 4250 7000 4800 *7900 7050 *9450 *9450
(15') (11300) (9350) (15400) (10550) (17350) (15500) (20800) (20800)
3.0 m *5500 3900 6850 6450 *9150 6750 *12100 10650
(10') (12100) (8550) (15050) (14200) (20100) (14850) (26600) (23400)
1.5 m 5550 3750 6650 4500 9550 6400 *14300 9950
(5') (12200) (8250) (14600) (9900) (21000) (14050) (31450) (21900)
0m 5750 3650 6550 4400 9300 6200 14950 9550 *8900 *8900
(0') (12650) (8000) (14400) (9650) (20450) (13600) (32900) (21000) (19550) (19550)
1.5 m 6300 4250 6500 4350 9200 6100 14850 9500 *15200 *15200
(5') (13850) (9350) (14300) (9550) (20200) (13400) (32650) (20900) (33400) (33400)
3.0 m *7700 5150 9250 6150 *13950 9600 *19550 *19550
(10') (16900) (11300) (20350) (13500) (30700) (21100) (43000) (43000)
4.5 m *8950 7650 *10950 9900
(15') (19700) (16800) (24100) (21750)
Arm length 2000 mm (6'7")
6.0 m *5100 *5100 *7850 7150
(20') (11200) (11200) (17250) (15700)
4.5 m *5200 4600 *5950 4700 *8500 6950 *10400 *10400 *14950 *14950
(15') (11400) (10100) (13100) (10300) (18700) (15300) (22850) (22850) (32900) (32900)
3.0 m *5550 4150 6750 4800 *9650 6650 *12950 10400
(10') (12200) (9130) (14850) (10550) (21200) (14600) (28500) (22850)
1.5 m 5950 4050 6600 4450 9450 6350 *14850 9750
(5') (13100) (8900) (14500) (9800) (20800) (13950) (32650) (21450)
0m 6200 4150 6550 4400 9150 6050 14850 9500
(0') (13600) (9100) (14400) (9650) (20100) (13300) (32650) (20900)
1.5 m 6950 4650 9200 6100 14850 9500 *15900 *15900
(5') (15300) (10200) (20200) (13400) (32650) (20900) (34950) (34950)
3.0 m 8700 5850 9300 6200 *13150 9650 *17800 *17800
(10') (19100) (12800) (20450) (13600) (28900) (21200) (39150) (39150)
4.5 m
(15')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-48
LIFTING CAPACITY
PC290NLC-7
Conditions: One-piece Boom: 5850 mm (19'2"), Bucket (SAE): 1.16 m3 (1.52 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3100 *3100 *4750 4450
(20') (6800) (6800) (10450) (9800)
4.5 m *3150 *3150 *6500 4350 *7200 6500
(15') (6900) (6900) (14300) (9550) (15800) (14300)
3.0 m *3350 *3050 6750 4200 *8550 6150 *11000 9750 *17550 *17550
(10') (7350) (6700) (14850) (9200) (18800) (13500) (24200) (21450) (38600) (38600)
1.5 m *3700 2950 6550 4050 9450 5800 *13550 9000 *8050 *8050
(5') (8100) (6500) (14400) (8900) (20800) (12750) (29800) (19800) (17700) (17700)
0m *4300 3000 6400 3900 9150 5550 14800 8550 *9500 *9500
(0') (9450) (6600) (14050) (8550) (20100) (12200) (32550) (18800) (20900) (20900)
1.5 m *5250 3300 6350 3800 8900 5300 14600 8350 *13600 *13600 *8550 *8550
(5') (11550) (7250) (13950) (8350) (19550) (11650) (32100) (18350) (29900) (29900) (18800) (18800)
3.0 m 6450 3900 9000 5400 *14550 8400 *19500 16850 *13200 *13200
(10') (14200) (8550) (19800) (11850) (32000) (18450) (42900) (37050) (29000) (29000)
4.5 m *8350 5350 *8750 5550 *12300 8600 *17400 17300
(15') (18350) (11750) (19250) (12200) (27050) (18900) (38250) (38050)
Arm length 3500 mm (11'6")
6.0 m *2400 *2400 *4300 *4300
(20') (5250) (5250) (9450) (9450)
4.5 m *2450 *2450 *5650 4400 *6600 6550
(15') (5400) (5400) (12400) (9650) (14500) (14400)
3.0 m *2650 *2650 6800 4250 *7950 6200 *10050 9950 *14800 *14800
(10') (5800) (5800) (14950) (9350) (17500) (13600) (22100) (21900) (32550) (32550)
1.5 m *2950 2750 6550 4050 *9350 5800 *12800 9100 *12500 *12500
(5') (6500) (6050) (14400) (8900) (20550) (12750) (28150) (20000) (27500) (27500)
0m *3450 2800 6400 3850 9150 5500 *14600 8550 *11050 *11050 *5000 *5000
(0') (7600) (6150) (14050) (8450) (20100) (12100) (32100) (18800) (24300) (24300) (11000) (11000)
1.5 m *4300 3000 6250 3750 8850 5250 14500 8300 *13750 *13750 *8500 *8500
(5') (9450) (6600) (13750) (8250) (19450) (9350) (31900) (18250) (30250) (30250) (18700) (18700)
3.0 m *5900 3550 6250 3750 8800 5200 14500 8250 *18200 16550 *12250 *12250
(10') (12950) (7800) (13750) (8250) (19350) (11400) (31900) (18150) (40000) (36400) (26950) (26950)
4.5 m 7800 4700 9000 5400 *13100 8450 *18850 17000
(15') (17150) (10300) (19800) (11850) (28800) (18600) (41450) (37400)
Arm length 2500 mm (8'2")
6.0 m *5000 4550 *7050 6600
(20') (11000) (10000) (15500) (14500)
4.5 m *5150 3850 6850 4300 *7900 6400 *9450 *9450
(15') (11300) (8450) (15050) (9450) (17350) (14050) (20800) (20800)
3.0 m *5500 3450 6700 4150 *9150 6050 *12100 9500
(10') (12100) (7600) (14700) (9100) (20100) (13300) (26600) (20900)
1.5 m 5450 3350 6550 4000 9400 5750 *14300 8850
(5') (12000) (7350) (14400) (8800) (20650) (12650) (31450) (19450)
0m 5650 3400 6400 3900 9150 5500 14700 8500 *8900 *8900
(0') (12400) (7450) (14050) (8550) (20100) (12100) (32300) (18700) (19550) (19550)
1.5 m 6200 3750 6400 3850 9000 5400 14600 8400 *15200 *15200
(5') (13600) (8250) (14050) (8450) (19800) (11850) (32100) (18450) (33400) (33400)
3.0 m 7600 4500 9100 5450 *13950 8500 *19550 17050
(10') (16700) (9900) (20000) (12000) (30700) (18700) (43000) (37500)
4.5 m *8950 6850 *10950 8800
(15') (19700) (15050) (24100) (19350)
Arm length 2000 mm (6'7")
6.0 m *5100 5000 *7850 6450
(20') (11200) (11000) (17250) (14200)
4.5 m *5200 4150 *5950 4200 *8500 6250 *10400 10050 *14950 *14950
(15') (11400) (9100) (13100) (9200) (18700) (13750) (22850) (22000) (32900) (32900)
3.0 m *5550 3700 6650 4100 *9650 5950 *12950 9250
(10') (12200) (8100) (14600) (9000) (21200) (13100) (28500) (20350)
1.5 m 5850 3600 6500 4000 9300 5650 *14850 8650
(5') (12850) (7900) (14300) (8800) (20450) (12400) (32650) (19000)
0m 6100 3700 6400 3900 9000 5400 14600 8400
(0') (13400) (8100) (14050) (8550) (19800) (11850) (32100) (18450)
1.5 m 6800 4150 9050 5450 14600 8400 *15900 *15900
(5') (14950) (9100) (19900) (12000) (32100) (18450) (34950) (34950)
3.0 m 8600 5200 9150 5550 *13150 8550 *17800 17200
(10') (18900) (11400) (20100) (12200) (28900) (18800) (39150) (37800)
4.5 m
(15')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-49
LIFTING CAPACITY
PC300-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *4600 *4600 *5950 5200
(25') (10100) (10100) (13200) (11500)
6.1 m *4500 3750 *6550 5200
(20') (9900) (8300) (14400) (11400)
4.6 m *4600 3250 5200 3500 *7050 5000 *8150 7400
(15') (10100) (7200) (11500) (7700) (15500) (11000) (18000) (16300)
3.0 m 4500 2950 5100 3350 *6950 4700 *9500 6850 *12650 10550
(10') (9900) (6500) (11200) (7400) (15300) (10400) (20900) (15100) (27900) (23300)
1.5 m 4350 2800 4950 3250 6700 4450 9550 6350 *14800 9750
(5') (9600) (6200) (10900) (7100) (14800) (9800) (21100) (14000) (32600) (21500)
0m 4450 2850 4800 3100 6450 4250 9150 6000 14600 9200 *7250 *7250
(0') (9800) (6300) (10500) (6900) (14200) (9400) (20200) (13200) (32200) (20300) (16000) (16000)
1.5 m 4750 3100 4800 3100 6350 4150 9000 5800 14400 9050 *11750 *11750
(5') (10500) (6800) (10500) (6800) (14000) (9100) (19800) (12800) (31700) (19900) (25900) (25900)
3.0 m 5500 3550 6350 4150 8950 5800 *13950 9100 *17200 *17200
(10') (12100) (7900) (14000) (9100) (19700) (12800) (30800) (20100) (37900) (37900)
4.6 m *6700 4750 *8500 6000 *11350 9350 *15250 *15200
(15') (14700) (10400) (18700) (13200) (25000) (20700) (33600) (33700)
6.1 m *5600 *5600 *6750 *6750
(20') (12300) (12300) (14900) (14900)
Arm length 4020 mm (13'2")
7.6 m *3550 *3550
(25') (7900) (7900)
6.1 m *3500 3200 *5350 3750
(20') (7700) (7000) (11800) (8300)
4.6 m *3550 2800 5400 3650 *6400 5200
(15') (7800) (6200) (11900) (8100) (14100) (11500)
3.0 m *3700 2550 5200 3500 7150 4900 *8600 7100 *11200 *11200 18050 18050
(10') (8200) (5600) (11500) (7700) (15800) (10800) (19000) (15700) (24700) (24700) (39800) (39800)
1.5 m 3800 2450 5000 3300 6800 4550 9750 6500 *13650 10100 *8050 *8050
(5') (8400) (5400) (11000) (7300) (15000) (10000) (21500) (14400) (30100) (22300) (17800) (17800)
0m 3850 2450 4850 3150 6500 4300 9250 6050 14700 9300 *8100 *8100
(0') (8500) (5400) (10700) (6900) (14300) (9400) (20400) (13300) (32400) (20500) (17800) (17800)
1.5 m 4100 2600 4750 3050 6300 4100 8900 5750 14250 8900 *10800 *10800
(5') (9000) (5700) (10500) (6700) (13900) (9000) (19700) (12700) (31400) (19600) (23800) (23800)
3.0 m 4550 2950 4750 3050 6250 4000 8800 5650 14150 8800 *14650 *14650
(10') (10000) (6500) (10400) (6700) (13700) (8900) (19400) (12500) (31200) (19400) (32300) (32300)
4.6 m 5600 3650 6300 4100 8900 5750 *12800 9000 *18300 *18300
(15') (12300) (8000) (13900) (9000) (19600) (12600) (28200) (19800) (40300) (40300)
6.1 m *5800 5250 *6950 6000 *9550 9350 *13100 *13100
(20') (12800) (11600) (15300) (13200) (21100) (20700) (28800) (28800)
Arm length 2200 mm (7'3")
7.6 m *7650 6400
(25') (16900) (14100)
6.1 m 7000 4800 7200 4950 *8200 7450
(20') (15400) (10600) (15900) (10900) (18100) (16400)
4.6 m 5950 4000 7050 4800 *9100 7050 *11750 11200
(15') (13100) (8800) (15500) (10600) (20100) (15500) (26000) (24700)
3.0 m 5350 3550 6750 4550 9700 6500 *14200 9900
(10') (11800) (7800) (14900) (10000) (21400) (14300) (31300) (21800)
1.5 m 5200 3400 6550 4300 9050 5900 14450 9100
(5') (11500) (7500) (14400) (9500) (20000) (13000) (31900) (20100)
0m 5350 3450 6350 4150 8950 5800 14200 8850
(0') (11800) (7600) (14000) (9200) (19700) (12800) (31300) (19500)
1.5 m 5850 3800 6350 4100 8900 5750 *14100 8900 *14200 *14200
(5') (12900) (8400) (14000) (9100) (19600) (12600) (31100) (19600) (31300) (31300)
3.0 m 7100 4650 8850 5700 *12200 9100 *15100 *15100
(10') (15700) (10300) (19500) (12600) (26900) (20100) (33300) (33300)
4.6 m *6900 *6900 *8550 *8550
(15') (15200) (15200) (18800) (18800)
Arm length 2550 mm (8'4")
7.6 m *6500 5500
(25') (14400) (12100)
6.1 m 6250 4250 *7100 5050
(20') (13800) (9400) (15700) (11100)
4.6 m 5400 3600 7150 4850 *8800 7150
(15') (11900) (7900) (15700) (10700) (19400) (15800)
3.0 m 4950 3250 6850 4600 9850 6600 *13750 10200
(10') (10900) (7200) (15100) (10100) (21700) (14500) (30300) (22500)
1.5 m 4800 3100 6600 4350 9350 6150 14750 9350
(5') (10600) (6800) (14500) (9600) (20600) (13600) (32500) (20600)
0m 4900 3200 6400 4200 9050 5850 14350 9000
(0') (10800) (7000) (14100) (9200) (19900) (12900) (31600) (19800)
1.5 m 5350 3450 6350 4100 8900 5750 14300 8950 *12350 *12350
(5') (11800) (7600) (14000) (9100) (19700) (12700) (31600) (19700) (27200) (27200)
3.0 m 6300 4100 6400 4200 8800 5650 *12900 9100 *16850 *16850
(10') (13900) (9100) (14100) (9200) (19400) (12400) (28400) (20100) (37200) (37200)
4.6 m *6600 5800 *7100 6100 *9650 9500 *12100 *12100
(15') (14600) (12800) (15600) (13500) (21300) (20900) (26700) (26700)
3C-50
LIFTING CAPACITY
3C-51
LIFTING CAPACITY
PC300HD-7
Conditions: Boom: 6500 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *5000 *5000 *6500 *6500
(25') (11000) (11000) (14300) (14300)
6.1 m *4900 *4900 *7200 *7200
(20') (10800) (10800) (15800) (15800)
4.6 m *5050 *5050 *6800 5450 *7750 7500 *8900 *8900
(15') (11100) (11100) (15000) (12100) (17000) (16500) (19600) (19600)
3.0 m *5350 4750 *7350 5350 *8500 7200 *10350 10200 *13800 *13800
(10') (11800) (10500) (16200) (11800) (18700) (15900) (22900) (22500) (30400) (30400)
0m *6650 4700 7350 6100 *9600 6750 *12300 9350 *17000 14350 *7900 *7900
(0') (14600) (10400) (16200) (11200) (21100) (14800) (27100) (20600) (37500) (31700) (17400) (17400)
3.0 m *7550 6750 *8800 6600 *11600 9150 *15300 14250 *18500 *18500
(10') (16600) (12700) (19400) (14600) (25400) (20200) (33700) (31400) (40800) (40800)
4.6 m *7400 *7400 *9400 9350 *12450 *12450 *16800 *16800
(15') (16300) (16300) (20700) (20600) (27500) (27500) (37000) (37000)
Arm length 4020 mm (13'2")
7.6 m *3750 *3750
(25') (8300) (8300)
6.1 m *3700 *3700 *5600 5550
(20') (8100) (8100) (12400) (12300)
4.6 m *3750 *3750 *6300 5450 *6900 *6900
(15') (8300) (8300) (13900) (12000) (15200) (15200)
3.0 m *3950 *3950 *6750 5300 *7700 7250 *9250 *9250 *12050 *12050
(10') (8700) (8700) (14800) (11700) (17000) (15900) (20400) (20400) (26600) (26600)
1.5 m *4250 3950 *7150 5100 *8500 6900 *10700 9800 *14850 *14850
(5') (9400) (8700) (15800) (11300) (18700) (15200) (23500) (21600) (32700) (32700)
0m *4750 4000 7150 4950 *9100 6600 *11700 9300 *16450 14450 *9100 *9100
(0') (10500) (8800) (15800) (10900) (20100) (14600) (25800) (20500) (36200) (31800) (20100) (20100)
1.5 m *5500 4200 7050 4850 *9350 6400 *12100 9000 *16750 14050 *8850 *8850
(5') (12200) (9300) (15600) (10700) (20600) (14100) (26700) (19800) (36900) (30900) (19600) (19600)
3.0 m *6700 4750 *6900 4850 *9050 6350 *11750 8900 *15950 13950 *16000 *16000
(10') (14800) (10400) (15200) (10700) (19900) (14000) (25900) (19600) (35200) (30800) (35300) (35300)
4.6 m *6700 5750 *7800 6400 *10300 8750 *14050 *14050 *19750 *19750
(15') (14800) (12600) (17200) (14200) (22700) (19300) (31000) (31000) (43600) (43600)
6.1 m *6350 *6350 *7600 *7600 *10500 10500 *14200 *14200
(20') (14800) (14800) (16700) (16700) (23100) (23100) (31300) (31300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-52
LIFTING CAPACITY
PC300SE-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 2.1 m3 (2.74 cu.yd), Shoes: 800 mm (31.5") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
7.6 m *7000 6600 *7150 *7150
(25') (15450) (14500) (15750) (15750)
6.1 m *6550 5200 *6650 5200 *7350 *7350
(20') (14450) (11500) (14650) (11450) (16200) (16200)
4.6 m 5200 4300 *6950 5050 *6900 *6900 *10750 *10750
(15') (11500) (9500) (15350) (11100) (15250) (15250) (23650) (23650)
3.0 m 6200 3850 *7450 4800 *9200 6900 *12950 10450
(10') (13700) (8450) (16400) (10550) (20250) (15150) (28500) (23100)
1.5 m 5950 3600 7400 4550 *9900 6450 *13900 9700
(5') (13150) (8000) (16350) (10050) (21750) (14200) (30600) (21350)
0m 6200 3750 7250 4400 *10000 6200 *13600 9450
(0') (13650) (8250) (16000) (9700) (22100) (13600) (29950) (20800)
1.5 m 6850 4150 7200 4350 *8100 6100 *12500 9500
(5') (15100) (9150) (15900) (9650) (17900) (13500) (27600) (20900)
3.0 m *6850 5100 *8150 6250 *10600 9700
(10') (15150) (11250) (17900) (13750) (23400) (21450)
4.6 m *6000 *6000 *7000 *7000
(15') (13250) (13250) (15400) (15400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-53
LIFTING CAPACITY
PC300LC-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *4600 *4600 *5950 5500
(25') (10100) (10100) (13200) (12100)
6.1 m *4500 3950 *6550 5450
(20') (9900) (8800) (14400) (12000)
4.6 m *4600 3450 6150 3700 *7050 5250 *8150 7750
(15') (10200) (7600) (13600) (8200) (15500) (11600) (18000) (17100)
3.0 m *4900 3100 6050 3550 *7750 5000 *9500 7200 *12650 11050
(10') (10800) (6900) (13300) (7900) (17100) (11000) (20900) (15800) (27900) (24400)
1.5 m 5200 3000 5900 3450 7950 4700 *10600 6700 *14800 10250
(5') (11500) (6600) (13000) (7600) (17500) (10400) (23400) (14800) (32700) (22600)
0m 5300 3050 5750 3350 7700 4500 10950 6350 *15600 9700 *7250 *7250
(0') (11700) (6700) (12700) (7400) (17000) (9900) (24200) (14000) (34300) (21400) (16000) (16000)
1.5 m 5700 3300 5700 3300 7600 4400 10750 6150 *15250 9550 *11750 *11750
(5') (12600) (7300) (12600) (7300) (16700) (9700) (23700) (13600) (33600) (21000) (25900) (25900)
3.0 m 6550 3800 7600 4400 *10500 6150 *13950 9600 *17200 *17200
(10') (14500) (8400) (16700) (9700) (23100) (13600) (30800) (21200) (37900) (37900)
4.6 m *6700 5000 *8500 6300 *11350 9850 *15250 *15250
(15') (14700) (11100) (18800) (13900) (25000) (21800) (33700) (33700)
6.1 m *5600 *5600 *6750 *6750
(20') (12300) (12300) (14900) (14900)
Arm length 4020 mm (13'2")
7.6 m *3550 *3550
(25') (7900) (7900)
6.1 m *3500 3400 *5350 4000
(20') (7700) (7500) (11800) (8800)
4.6 m *3550 2950 *5850 3850 *6400 5500
(15') (7800) (6500) (13000) (8500) (14100) (12100)
3.0 m *3700 2700 6150 3700 *7200 5150 *8600 7450 *11200 *11200 18050 18050
(10') (8200) (6000) (13600) (8200) (15800) (11300) (19000) (16400) (24700) (24700) (39800) (39800)
1.5 m *4000 2600 5950 3500 *7900 4800 *9900 6850 *13650 10600 *8050 *8050
(5') (8800) (5800) (13200) (7700) (17400) (10500) (21800) (15100) (30100) (23400) (17800) (17800)
0m *4450 2650 5800 3350 7750 4550 *10800 6400 *15050 9800 *8100 *8100
(0') (9800) (5800) (12800) (7400) (17100) (10000) (23800) (14100) (32200) (21600) (17800) (17800)
1.5 m 4900 2800 5700 3250 7550 4350 10700 6100 *15350 9400 *10800 *10800
(5') (10800) (6100) (12600) (7200) (16600) (9600) (23600) (13400) (33800) (20700) (23800) (23800)
3.0 m 5500 3150 5650 3250 7450 4300 10600 6000 *14650 9300 *14650 *14650
(10') (12100) (6900) (12500) (7100) (16500) (9400) (23300) (13200) (32300) (20500) (32300) (32300)
4.6 m *6200 3900 *7200 4350 *9600 6050 *12800 9500 *18300 *18300
(15') (13600) (8600) (15900) (9600) (21200) (13400) (28200) (20900) (40300) (40300)
6.1 m *5800 5550 *6950 6350 *9550 *9550 *13100 *13100
(20') (12800) (12200) (15300) (14000) (21100) (21100) (28800) (28800)
Arm length 2200 mm (7'3")
7.6 m *7650 6700
(25') (16900) (14700)
6.1 m *7350 5050 *7400 5200 *8200 7800
(20') (16200) (11100) (16300) (11400) (18100) (17200)
4.6 m 7000 4200 *7750 5050 *9100 7400 *11750 11700
(15') (15500) (9300) (17000) (11100) (20100) (16300) (26000) (25800)
3.0 m 6400 3750 8050 4800 *10250 6850 *14200 10400
(10') (14100) (8300) (17700) (10600) (22600) (15100) (31300) (22900)
1.5 m 6200 3600 7750 4550 10850 6250 *15350 9600
(5') (13700) (8000) (17100) (10100) (24000) (13800) (33900) (21200)
0m 6400 3700 7600 4400 10750 6150 *15150 9350
(0') (14100) (8100) (16800) (9700) (23700) (13500) (33400) (20600)
1.5 m 7000 4050 7550 4350 10650 6050 *14100 9400 *14200 *14200
(5') (15500) (9000) (16700) (9600) (23500) (13400) (31100) (20700) (31300) (31300)
3.0 m *7650 4900 *9300 6050 *12200 9600 *15100 *15100
(10') (16900) (10800) (20500) (13400) (26900) (21200) (33300) (33300)
4.6 m *6900 *6900 *8550 *8550
(15') (15200) (15200) (18800) (18800)
Arm length 2550 mm (8'4")
7.6 m *6500 5750
(25') (14400) (12700)
6.1 m *6400 4500 *7100 5300
(20') (14100) (9900) (15700) (11700)
4.6 m 6400 3600 *7500 5100 *8800 7500
(15') (11900) (7900) (16600) (11300) (19400) (16600)
3.0 m 5900 3450 8100 4850 *10000 6950 *13750 10700
(10') (13000) (7600) (17900) (10700) (22100) (15300) (30300) (23600)
1.5 m 5750 3300 7850 4600 *10900 6500 *15250 9850
(5') (12600) (7300) (17300) (10200) (24100) (14300) (33700) (21700)
0m 5850 3300 7650 4450 10800 6200 *15450 9500
(0') (12900) (7300) (16800) (9800) (23900) (13700) (34000) (20900)
1.5 m 6400 3700 7550 4350 10700 6100 *14600 9450 *12350 *12350
(5') (14100) (8100) (16700) (9600) (23600) (13500) (32200) (20800) (27200) (27200)
3.0 m *7150 4350 *7300 4450 *9700 6000 *12900 9600 *16850 *16850
(10') (15800) (9600) (16100) (9800) (21400) (13200) (28400) (21200) (37200) (37200)
4.6 m *6600 6100 *7100 6450 *9650 *9650 *12100 *12100
(15') (14600) (13500) (15600) (14200) (21300) (21300) (26700) (26700)
3C-54
LIFTING CAPACITY
3C-55
LIFTING CAPACITY
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4020 mm (13'2")
7.6 m *3900 *3900
(25') (8600) (8600)
6.1 m *3850 3800
(20') (8500) (8400)
4.6 m *3900 3350 *7050 6000
(15') (8600) (7400) (15500) (13300)
3.0 m *4050 3100 7850 5700 *9350 8250 *12200 *12200
(10') (9000) (6900) (17300) (12600) (20700) (18200) (26900) (26900)
1.5 m *4400 3000 *8650 5350 *10800 7650 *14950 11850 *9300 *9300
(5') (9700) (6600) (19100) (11800) (23900) (16800) (33000) (26100) (20500) (20500)
0m *4850 3050 8450 5100 *11850 7150 *16600 11000 *9050 *9050
(0') (10700) (6700) (18700) (11200) (26100) (15800) (36500) (24200) (19900) (19900)
1.5 m 5450 3200 8250 4900 11750 6850 *16900 10600 *11900 *11900 *7500 *7500
(5') (12000) (7100) (18200) (10800) (25900) (15100) (37300) (23400) (26300) (26300) (16500) (16500)
3.0 m 6100 3600 8200 4850 11650 6750 *16100 10550 *16200 *16200 *11300 *11300
(10') (13400) (7900) (18100) (10700) (25600) (14900) (35500) (23200) (35700) (35700) (24900) (24900)
4.6 m *6450 6200 *7700 7150 *10650 *10650 *14350 *14350
(15') (14300) (13700) (17000) (15700) (23400) (23400) (31600) (31600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-56
LIFTING CAPACITY
PC340LC-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.38 m3 (1.80 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm (10'6")
6.0 m *4900 4250 *7150 6000
(20') (10750) (9350) (15700) (13200)
4.5 m *5000 3700 *7700 5750 *8950 8500
(15') (11000) (8100) (16900) (12650) (19700) (18700)
3.0 m *5300 3400 *8450 5450 *10350 7900 *13900 12200
(10') (11650) (7450) (18600) (12000) (22750) (17350) (30550) (26800)
1.5 m 5550 3250 8600 5200 *11600 7350 *16350 11350
(5') (12200) (7150) (18900) (11400) (25500) (16150) (35950) (24950)
0m 5650 3300 8350 4950 11950 6950 *17150 10750 *7850 *7850
(0') (12400) (7250) (18350) (10900) (26300) (15300) (37700) (23650) (17250) (17250)
1.5 m 6100 3550 8200 4800 *11700 6800 *16750 10600 *12650 *12650 *8850 *8850
(5') (13400) (7800) (18000) (10550) (25700) (14950) (36850) (23300) (27800) (27800) (19450) (19450)
3.0 m 6950 4100 8200 4800 *11500 6750 *15300 10650 *18500 *18500 *13600 *13600
(10') (15300) (9000) (18000) (10550) (25300) (14850) (33650) (23400) (40700) (40700) (29900) (29900)
4.5 m *7250 5250 *9550 6950 *12650 10950 *16750 *16750
(15') (15900) (11550) (21000) (15300) (27800) (24100) (36850) (36850)
Arm length 4000 mm (13'1")
6.0 m *3700 3550
(20') (8100) (7800)
4.5 m *3750 3150 *6950 5950
(15') (8250) (6900) (15300) (13100)
3.0 m *3950 2900 *7800 5600 *9400 8200 *12300 *12300 *19450 *19450
(10') (8700) (6350) (17150) (12300) (20650) (18000) (27050) (27050) (42800) (42800)
1.5 m *4250 2800 *8600 5250 *10850 7550 *15100 11800 *8550 *8550
(5') (9350) (6150) (18900) (11550) (23850) (16600) (33200) (25950) (18800) (18800)
0m *4750 2800 8400 4950 *11850 7050 *16650 10900 *8600 *8600
(0') (10450) (6150) (18450) (10900) (26050) (15500) (36600) (23950) (18900) (18900)
1.5 m 5200 3000 8200 4800 11700 6750 *16950 10500 *11450 *11450 *7250 *7250
(5') (11400) (6600) (18000) (10550) (25700) (14850) (37300) (23100) (25200) (25200) (15950) (15950)
3.0 m 5800 3350 8100 4700 11550 6650 *16150 10450 *15600 *15600 *11000 *11000
(10') (12750) (7350) (17800) (10300) (25400) (14600) (35500) (23000) (34300) (34300) (24200) (24200)
4.5 m *6650 4100 *8050 4750 *10700 6700 *14300 10600 *20050 *20050 *15350 *15350
(15') (14600) (9000) (17700) (10450) (23500) (14700) (31450) (23300) (44100) (44100) (33750) (33750)
Arm length 2550 mm (8'4")
6.0 m *6900 4850 *7800 5900
(20') (15150) (10650) (17150) (12950)
4.5 m 6850 4150 *8300 5700 *9800 8350 *12600 *12600
(15') (15050) (9100) (18250) (12500) (21550) (18350) (27700) (27700)
3.0 m 6350 3800 8900 5450 *11100 7750 *15350 12000
(10') (13950) (8350) (19550) (12000) (24400) (17050) (33750) (26400)
1.5 m 6200 3700 8600 5200 *12100 7300 *17050 11050
(5') (13600) (8100) (18900) (11400) (26600) (16050) (37500) (24300)
0m 6350 3750 8400 5000 11900 6950 *17150 10700
(0') (13950) (8250) (18450) (11000) (26150) (15300) (37700) (23500)
1.5 m 6900 4100 8300 4900 11800 6850 *16200 10650 *13350 *13350
(5') (15150) (9000) (18250) (10750) (25450) (15050) (35600) (23400) (29350) (29350)
3.0 m *7850 4800 *8200 5000 *10750 6700 *14300 10850 *18400 *18400
(10') (17250) (10550) (18000) (11000) (23650) (14700) (31450) (23850) (40450) (40450)
4.5 m *7350 6500 *8250 7200 *11000 *11000 *13650 *13650
(15') (16150) (14300) (18150) (15800) (24200) (24200) (30000) (30000)
Arm length 2200 mm (7'3")
6.0 m *8000 5400 *8150 5800 *9100 8650
(20') (17600) (11850) (17900) (12750) (20000) (19000)
4.5 m 7500 4600 *8550 5600 *10150 8200 *13250 13000
(15') (16500) (10100) (18800) (12300) (22300) (18000) (29150) (28600)
3.0 m 6900 4150 8800 5350 *11350 7650 *15900 11650
(10') (15150) (9100) (19350) (11750) (24950) (16800) (34950) (25600)
1.5 m 6700 4000 8550 5100 11900 6950 *17150 10800
(5') (14700) (8800) (18800) (11200) (26150) (15300) (37700) (23750)
0m 6900 4100 8350 4950 11850 6900 *16850 10550
(0') (15150) (9000) (18350) (10900) (26050) (15150) (37050) (23200)
1.5 m 7550 4500 8300 4900 11750 6800 *15650 10600 *15300 *15300
(5') (16600) (9900) (18250) (10750) (25850) (14950) (34400) (23300) (33650) (33650)
3.0 m *8350 5400 *10350 6750 *13500 10850 *16500 *16500
(10') (18350) (11850) (22750) (14850) (29700) (23850) (36300) (36300)
4.5 m *7700 *7700 *9850 *9850 *11600 *11600
(15') (16900) (16900) (21650) (21650) (25500) (25500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-57
LIFTING CAPACITY
PC340NLC-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.38 m3 (1.80 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm (10'6")
6.0 m *4900 3800 *7150 5400
(20') (10750) (8350) (15700) (11850)
4.5 m *5000 3250 *7700 5200 *8950 7700
(15') (11000) (7150) (16900) (11400) (19700) (16900)
3.0 m *5300 3600 *8450 4900 *10350 7100 *13900 10900
(10') (11650) (7900) (18600) (10750) (22750) (15200) (30550) (23950)
1.5 m 5450 2850 8450 4600 *11600 6600 *16350 10050
(5') (12000) (6250) (18600) (10100) (25500) (14500) (35950) (22100)
0m 5550 2900 8200 4400 11750 6200 *17150 9500 *7850 *7850
(0') (12200) (6350) (18000) (9650) (25850) (13600) (37700) (20900) (17250) (17250)
1.5 m 5950 3150 8100 4250 *11500 6000 *15300 9400 *18500 *18500 *8850 *8850
(5') (13100) (6900) (17800) (9350) (25300) (13200) (33650) (20650) (40700) (40700) (19450) (19450)
3.0 m 6850 3600 8100 4250 *11500 6000 *15300 9400 *18500 *18500 *13600 *13600
(10') (15050) (7900) (17800) (9350) (25300) (13200) (33650) (20650) (40700) (40700) (29900) (29900)
4.5 m *7250 4700 *9550 6150 *12650 9650 *16750 *16750
(15') (15900) (10300) (21000) (13500) (27800) (21200) (36850) (36850)
Arm length 4000 mm (13'1")
6.0 m *3700 3150
(20') (8100) (6900)
4.5 m *3750 2750 *6950 5400
(15') (8250) (6050) (15300) (11850)
3.0 m *3950 2550 *7800 5050 *9400 7400 *12300 11800 *19450 *19450
(10') (8700) (5600) (17150) (11100) (20650) (16250) (27050) (25950) (42800) (42800)
1.5 m *4250 2450 8600 4700 *10850 6750 *15100 10500 *8550 *8550
(5') (9350) (5400) (18900) (10340) (23850) (14850) (33200) (23100) (18800) (18800)
0m *4750 2450 8250 4400 11850 6250 *16650 9650 *8600 *8600
(0') (10450) (5400) (18150) (9650) (26050) (13750) (36600) (21200) (18900) (18900)
1.5 m 5100 2600 8050 4200 11500 5950 *16950 9250 *11450 *11450 *7250 *7250
(5') (11220) (5700) (17700) (9200) (25300) (13100) (37300) (20350) (25200) (25200) (15950) (15950)
3.0 m 5700 2950 7950 4150 11400 5850 *16150 9200 *15600 *15600 *11000 *11000
(10') (12500) (6500) (17500) (9100) (25050) (12850) (35500) (20200) (34300) (34300) (24200) (24200)
4.5 m *6650 3600 8050 4200 *10700 5950 *14300 9350 *20050 18950 *15350 *15350
(15') (14600) (7900) (17700) (9200) (23500) (13100) (31450) (20550) (44100) (41700) (33750) (33750)
Arm length 2550 mm (8'4")
6.0 m *6900 4350 *7800 5350
(20') (15150) (9550) (17150) (11750)
4.5 m 6700 3750 *8300 5150 *9800 7550 *12600 12000
(15') (14700) (8250) (18250) (11300) (21550) (16600) (27700) (26400)
3.0 m 6250 3400 8750 4900 *11100 7000 *15350 10700
(10') (13750) (7450) (19250) (10750) (24400) (15400) (33750) (23500)
1.5 m 6050 3250 8600 4600 12100 6500 *17150 9450
(5') (13300) (7150) (18900) (10100) (26600) (14300) (37700) (20800)
0m 6250 3300 8400 4450 11750 6200 *17150 9450
(0') (13750) (7250) (18450) (9800) (25850) (13600) (37700) (20800)
1.5 m 6750 3600 8300 4350 11600 6100 *16200 9400 *13350 *13350
(5') (14850) (7900) (18250) (9550) (25500) (13400) (35600) (20650) (29350) (29350)
3.0 m *7850 4300 *8200 4450 *10750 5950 *14300 9600 *18400 *18400
(10') (17250) (9450) (18000) (9800) (23650) (13100) (31450) (21100) (40450) (40450)
4.5 m *7350 5800 *8250 6400 *11000 9950 *13650 *13650
(15') (16150) (12750) (18150) (14050) (24200) (21900) (30000) (30000)
Arm length 2200 mm (7'3")
6.0 m *8000 4900 *8150 5250 *9100 7850
(20') (17600) (10750) (17900) (11550) (20000) (17250)
4.5 m 7350 4100 *8550 5050 *10150 7400 *13250 11700
(15') (16150) (9000) (18800) (11100) (22300) (16250) (29150) (25700)
3.0 m 6750 3700 8800 4800 *11350 6850 *15900 10350
(10') (14850) (8100) (19350) (10550) (24950) (15050) (34950) (22750)
1.5 m 6600 3550 8550 4550 11750 6200 *17150 9550
(5') (14500) (7800) (18800) (10000) (25850) (13600) (37700) (21000)
0m 6750 3600 8350 4400 11650 6100 *16850 9300
(0') (14850) (7900) (18350) (9650) (25600) (13400) (37050) (20450)
1.5 m 7400 3950 8300 4350 11550 6050 *15850 9350 *15300 *15300
(5') (16250) (8700) (18250) (9550) (25400) (13300) (34850) (20550) (33650) (33650)
3.0 m *8350 4800 *10350 6000 *13500 9600 *16500 *16500
(10') (18350) (10550) (22750) (13200) (29700) (21100) (36300) (36300)
4.5 m *7700 6900 *9850 *9850 *11600 *11600
(15') (16900) (15150) (21650) (21650) (25500) (25500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-58
LIFTING CAPACITY
3C-59
LIFTING CAPACITY
PC380LC-6
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.32 m3 1.73 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.0 m (30') 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
6.0 m 7350* 6500 7550* 7350 8450* 8450*
(20') (16200) (14300) (16600) (16200) (18600) (18600)
4.5 m 7300 5700 7950* 7200 9500* 9500 12450* 12450*
(15') (16100) (12500) (17500) (15800) (20900) (20900) (27400) (27400)
3.0 m 7350 5250 8500* 6900 10800* 9700 14850* 14850
(10') (16200) (11600) (18700) (15200) (23800) (21300) (32700) (32700)
1.5 m 7400 5150 8900 6650 11400* 9250 14500* 14100
(5') (16300) (11300) (19600) (14600) (25100) (20400) (31900) (31000)
0m 7500 5300 9000 6500 11550 9000 15550* 13900
(0') (16500) (11700) (19800) (14300) (25400) (19800) (34200) (30600)
1.5 m 7550 5800 8500 6500 11050* 8950 14450* 13950 12400* 12400*
(5') (16600) (12800) (18700) (14300) (24300) (19700) (31800) (30700) (27300) (27300)
3.0 m 7450* 6950 9650* 9100 12400* 12400 15250* 15250*
(10') (16400) (15300) (21200) (20000) (27300) (27300) (33600) (33600)
4.5 m 6650* 6650* 8950* 8950*
(15') (14600) (14600) (19700) (19700)
Arm length 2550 mm (8'4")
6.0 m 5600* 5600 7200* 7200
(20') (12300) (12300) (15800) (15800)
4.5 m 5700* 5200 7700* 7200 9100* 9100 11750* 11750*
(15') (12500) (11400) (16900) (15800) (20000) (20000) (25900) (25900)
3.0 m 6000* 4850 8300* 6950 10300* 9800 14300* 14300
(10') (13200) (10700) (18300) (15300) (22700) (21600) (31500) (31500)
1.5 m 6500 4750 8800 6700 11200* 9300 15750* 14250
(5') (14300) (10500) (19400) (14700) (24600) (20500) (34700) (31400)
0m 7050 4900 8950 6500 11550* 9000 15800* 13950
(0') (15500) (10800) (19700) (14300) (25400) (19800) (34800) (30700)
1.5 m 7100 5300 8650 6450 11200* 8900 14850* 13950 11100* 11100*
(5') (15600) (11700) (19000) (14200) (24600) (19600) (32700) (30700) (24400) (24400)
3.0 m 7000* 6250 7450* 6500 10050* 9000 13100* 13100 16850* 16850*
(10') (15400) (13800) (16400) (14300) (22100) (19800) (28800) (28800) (37100) (37100)
4.5 m 6450* 6450 7400* 7400 10000* 10000* 12450* 12450*
(15') (14200) (14200) (16300) (16300) (22000) (22000) (27400) (27400)
Arm length 3185 mm (10'5")
6.0 m 3800* 3800* 6650* 6650
(20') (8400) (8400) (14600) (14600)
4.5 m 3900* 3900 7200* 7200 8400* 8400*
(15') (8600) (8600) (15800) (15800) (18500) (18500)
3.0 m 4100* 4100 7900* 7050 9700* 9700 13250* 13250
(10') (9000) (9000) (17400) (15500) (21300) (21300) (29200) (29200)
1.5 m 4450* 4300 8500 6750 10800* 9450 15250* 14850
(5') (9800) (9500) (18700) (14900) (23800) (20800) (33600) (32700)
0m 5000* 4400 8900 6500 11450* 9100 15900* 14100 6450* 6450*
(0') (11000) (9700) (19600) (14300) (25200) (20000) (35000) (31000) (14200) (14200)
1.5 m 5950 4750 8800 6400 11400* 8900 15500* 13950 10700* 10700*
(5') (13100) (10500) (19400) (14100) (25100) (19600) (34100) (30700) (23500) (23500)
3.0 m 6650 5450 8100 6400 10800* 8900 14100* 14000 15900* 15900*
(10') (14600) (12000) (17800) (14100) (23800) (19600) (31000) (30800) (35000) (35000)
4.5 m 6450* 6450 8700* 8700 11800* 11800 15400* 15400*
(15') (14200) (14200) (19100) (19100) (26000) (26000) (33900) (33900)
Arm length 4020 mm (13'2")
6.0 m 2800* 2800*
(20') (6200) (6200)
4.5 m 2850* 2850* 6400* 6400
(15') (6300) (6300) (14100) (14100)
3.0 m 2950* 2950 7150* 7100 8650* 8650 11500* 11500* 18400* 18400*
(10') (6500) (6500) (15700) (15600) (19000) (19000) (25300) (25300) (40500) (40500)
1.5 m 3200* 3200 7900* 6750 10000* 9550 14000* 14000 6450* 6450*
(5') (7000) (7000) (17400) (14900) (22000) (21000) (30800) (30800) (14200) (14200)
0m 3550* 3550 8450 6450 10950* 9050 15400* 14100 7000* 7000*
(0') (7800) (7800) (18600) (14200) (24100) (19900) (33900) (31000) (15400) (15400)
1.5 m 4100* 3950 8700 6250 11250* 8750 15600* 13700 9650* 9650*
(5') (9000) (8700) (19100) (13800) (24800) (19300) (34300) (30100) (21200) (21200)
3.0 m 5050* 4450 8400 6200 10900* 8650 14800* 13650 13400* 13400*
(10') (11100) (9800) (18500) (13600) (24000) (19000) (32600) (30000) (29500) (29500)
4.5 m 5900 5400 7250* 6250 9700* 8750 13000* 13000 18300* 18300*
(15') (13000) (13000) (16000) (13800) (21300) (19300) (28600) (28600) (40300) (40300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-60
LIFTING CAPACITY
PC400-6
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5750* 5750*
(25') (12700) (12700)
6.1 m 5750* 5000 8300* 5850 9000* 8250
(20') (12600) (11100) (18300) (12900) (19900) (18200)
4.6 m 5900* 4450 8600 5700 9900* 7900 11800* 11500
(15') (13000) (9800) (19000) (12600) (21800) (17500) (26000) (25400)
3.0 m 6200* 4150 8350 5450 10900* 7500 13650* 10700 19000* 16700
(10') (13700) (9100) (18400) (12100) (24000) (16500) (30100) (23600) (41900) (36800)
1.5 m 6350 4050 8100 5250 10900 7100 15150* 10000 21450* 15350
(5') (14000) (8900) (17900) (11600) (24100) (15600) (33400) (22000) (47300) (33800)
0m 6500 4100 7950 5050 10600 6800 15100 9500 21100* 14700
(0') (14300) (9100) (17500) (11200) (23300) (15000) (33300) (21000) (46500) (32400)
1.5 m 6950 4400 7850 5000 10400 6600 14850* 9300 21250* 14550 13550* 13550*
(5') (15300) (9700) (17300) (11000) (22900) (14600) (32700) (20500) (46800) (32100) (29500) (29500)
3.0 m 7850 5000 7850 5000 10400 6600 14750* 9300 19400* 14700 19650* 19650*
(10') (17300) (10100) (17400) (11100) (22900) (14600) (32600) (20500) (42800) (32400) (43400) (43400)
4.6 m 8450* 6200 9500* 6750 12650* 9500 16350* 15050 21300* 21300*
(15') (18700) (13700) (20900) (14900) (27800) (20900) (36100) (33200) (47000) (47000)
6.1 m 7500* 7500* 8400* 8400* 11350* 11350*
(20') (16600) (16600) (18500) (18500) (25000) (25000)
Arm length 4800 mm (15'9")
7.6 m 3850* 3850*
(25') (8400) (8400)
6.1 m 3800* 3800* 6050* 4500 7000* 6200
(20') (8400) (8400) (13300) (9900) (15400) (13700)
4.6 m 3850* 3550 6700 4350 7550* 6000
(15') (8500) (7800) (14800) (9600) (16700) (13200)
3.0 m 4050* 3300 6500 4200 8250* 5700 9500* 7850 11500* 11400
(10') (8900) (7300) (14400) (9300) (18200) (12500) (21000) (17300) (25400) (25100)
1.5 m 4350* 3200 6350 4050 8250 5400 10650* 7350 13500* 10450 18850* 16350
(5') (9600) (7100) (14000) (8900) (18200) (11900) (23500) (16200) (29800) (23100) (41600) (36100)
0m 4800* 3200 6150 3850 8000 5100 10700 6900 14950* 9750 21100* 15100 9550* 9550*
(0') (10600) (7100) (13600) (8500) (17600) (11300) (23600) (15200) (33000) (21500) (46500) (33300) (21100) (21100)
1.5 m 5450 3400 6050 3750 7750 4900 10350 6600 14850 9250 21750* 14450 12050* 12050*
(5') (12100) (7500) (13300) (8300) (17100) (10800) (22900) (14500) (32700) (20400) (47900) (31900) (26600) (26600)
3.0 m 6000 3750 6050 3750 7650 4800 10200 6400 14600 9050 21100* 14300 15750* 15750*
(10') (13200) (8200) (13300) (8300) (16900) (10600) (22500) (14200) (32200) (20000) (46600) (31500) (34700) (34700)
4.6 m 6950* 4350 7700 4850 10200 6400 14450* 9050 19350* 14400 20600* 20600*
(15') (15300) (9600) (17000) (10700) (22500) (14100) (31900) (20000) (42600) (31700) (45500) (45500)
6.1 m 7400* 5600 9150* 6600 12200* 9300 16150* 14750 22350* 22350*
(20') (16300) (12400) (20200) (14500) (26900) (20500) (35600) (32500) (49300) (49300)
Arm length 4000 mm (13'1")
7.6 m 4900* 4900* 7200* 6100
(25') (10900) (10900) (15900) (13400)
6.1 m 4900* 4550 7750* 6000
(20') (10800) (10000) (17100) (13200)
4.6 m 5000* 4050 6300* 4200 8200* 5800 9250* 8050
(15') (11100) (8900) (13900) (9300) (18100) (12800) (20300) (17800)
3.0 m 5300* 3750 6400 4100 8450 5550 10300* 7600 12750* 10950 17200* 17050
(10') (11700) (8300) (14100) (9000) (18600) (12200) (22700) (16800) (28100) (24100) (37900) (37600)
1.5 m 5750* 3650 6250 3950 8150 5250 11000 7150 14450* 10100 20400* 15650
(5') (12700) (8100) (13800) (8700) (18000) (11600) (24200) (15800) (31900) (22300) (45000) (34500)
0m 5900 3700 6150 3850 7900 5050 10600 6800 15100 9550 21750* 14750 8850* 8850*
(0') (13000) (8200) (13500) (8500) (17400) (11100) (23300) (14900) (33300) (21000) (47900) (32500) (19600) (19600)
1.5 m 6250 3900 7750 4900 10350 6550 14750 9200 21550* 14400 12950* 12950*
(5') (13800) (8600) (17100) (10800) (22800) (14400) (32500) (20300) (47600) (31800) (28550) (28550)
3.0 m 7000 4400 7750 4900 10250 6450 14650 9100 20250* 14400 17950* 17950*
(10') (15400) (9700) (17000) (10800) (22600) (14300) (32300) (20100) (44700) (31800) (39500) (39500)
4.6 m 8150* 5300 10350* 6550 13550* 9250 17750* 14650 24300* 24300*
(15') (18000) (11700) (22800) (14500) (29800) (20400) (39200) (32300) (63500) (63500)
6.1 m 7750* 7300 10350* 9550 13650* 13650* 17850* 17850*
(20') (17100) (16000) (22800) (21100) (30100) (30100) (39400) (39400)
3C-61
LIFTING CAPACITY
PC400-6
Conditions: Boom: 7060 mm (21'3"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
7.6 m 8900* 7000 9100* 8300
(25') (19600) (15400) (20000) (18300)
6.1 m 8600 5700 8650 5750 9550* 8150
(20') (19000) (12600) (19100) (12700) (21100) (17900)
4.6 m 7700 5000 8500 5600 10350* 7800 12500* 11300 16500* 16500*
(15') (16900) (11100) (18800) (12400) (22900) (17200) (27500) (24900) (36400) (36400)
3.0 m 7200 4650 8300 5400 11250 7400 14200* 10500 20050* 16150
(10') (15800) (10200) (18300) (11900) (24800) (16300) (31300) (23100) (44200) (35600)
1.5 m 7050 4500 8100 5200 10850 7000 15450 9850 20200* 15000
(5') (15500) (9900) (17800) (11500) (23900) (15500) (34000) (21700) (44500) (33000)
0m 7200 4600 7900 5050 10550 6750 15000 9450 21800* 14600
(0') (15900) (10100) (17500) (11200) (23300) (14900) (33100) (20800) (48000) (32200)
1.5 m 7750 4950 7850 5000 10400 6650 14850 9300 20550* 14600 15300* 15300*
(5') (17100) (10900) (17400) (11100) (23000) (14600) (32700) (20500) (45400) (32100) (33800) (33800)
3.0 m 8950 5750 10450 6650 14250* 9350 18400* 14800 23450* 23450*
(10') (19800) (12700) (23100) (14700) (31400) (20600) (40600) (32600) (61700) (61700)
4.6 m 9200* 7450 11650* 9600 14900* 14900* 18450* 18450*
(15') (20300) (16400) (26700) (21200) (32900) (32900) (40700) (40700)
Arm length 2400 mm (7'10")
7.6 m 9700* 7700 9800* 8200
(25') (21400) (17000) (21600) (18000)
6.1 m 9350 6250 10150* 8050
(20') (20600) (13800) (22300) (17700)
4.6 m 8250 5450 8450 5550 10850* 7700 13200* 11100 17550* 17050
(15') (18200) (12000) (18600) (12300) (24000) (17000) (29100) (24500) (38700) (37600)
3.0 m 7700 5000 8300 5400 11200 7350 14800* 10350
(10') (17000) (11100) (18300) (11900) (24600) (16200) (32600) (23800)
1.5 m 7550 4900 8100 5250 10800 7000 15350 9750
(5') (16700) (10800) (17900) (11600) (23800) (15400) (33800) (21500)
0m 7800 5000 8000 5150 10550 6800 14950 9450 19950* 14600
(0') (17200) (11000) (17600) (11300) (23300) (15000) (33000) (20800) (44000) (32100)
1.5 m 8450 5450 10500 6700 14900 9350 19700* 14700
(5') (18700) (12000) (23100) (14800) (32800) (20600) (43400) (32400)
3.0 m 9750 6400 10500* 6800 13650* 9500 17200* 15000 20350* 20350*
(10') (21600) (14100) (23100) (15000) (30100) (20900) (37900) (33000) (44900) (44900)
4.6 m 9150* 8600 10400* 9850 13250* 13250*
(15) (20100) (19000) (23000) (21700) (29200) (29200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-62
LIFTING CAPACITY
PC400-6 EXCEL
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5800* 5800*
(25') (12800) (12800)
6.1 m 5800* 5050 8350* 5900 9050* 8350
(20') (12700) (11200) (18500) (13000) (20000) (18300)
4.6 m 5950* 4500 8650 5750 9950* 7950 11850* 11550
(15') (13100) (9900) (19100) (12700) (21900) (17600) (26100) (25500)
3.0 m 6250* 4200 8400 5500 10950* 7550 13700* 10750 19050* 16750
(10') (13800) (9200) (18500) (12200) (24100) (16600) (30200) (23700) (42000) (36900)
1.5 m 6400 4100 8150 5300 10950 7150 15200* 10050 21500* 15350
(5') (14100) (9000) (18000) (11700) (24200) (15700) (33500) (22100) (47400) (33900)
0m 6550 4150 7950 5100 10650 6850 15150 9550 21150* 14750
(0') (14400) (9100) (17600) (11300) (23400) (15100) (33400) (21100) (46600) (32500)
1.5 m 6950 4450 7850 5000 10450 6650 14900 9350 21250* 14600 13400* 13400*
(5') (15400) (9800) (17400) (11100) (23000) (14700) (32800) (20600) (46900) (32200) (29600) (29600)
3.0 m 7900 5050 7900 5050 10450 6650 14800* 9350 19450* 14750 19750* 19750*
(10') (17400) (11100) (17500) (11200) (23000) (14700) (32700) (20600) (42900) (32500) (43500) (43500)
4.6 m 8500* 6250 9550* 6800 12700* 9500 16400* 15050 21350* 21350*
(15') (18800) (13800) (21000) (15000) (28000) (21000) (36200) (33200) (47100) (47100)
6.1 m 7550* 7550* 8450* 8450* 11400* 11400*
(20') (16700) (16700) (18600) (18600) (25100) (25100)
PC400HD-6
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.0 m (30') 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4800 mm (13'8")
7.5 m 3850* 3850*
(25') (8500) (8500)
6.0 m 3800* 3800* 7050* 6950
(20') (9400) (9400) (15600) (15300)
4.5 m 3900* 3900* 7600* 6700
(15') (8600) (8600) (16800) (14800)
3.0 m 4100* 3800 8350* 5400 9650* 8750 11700* 11700*
(10') (9000) (8400) (18400) (14100) (21200) (19300) (25800) (25800)
1.5 m 4400* 3700 9000* 5100 10750* 8250 13650* 11700 19150* 18300
(5') (9700) (8200) (19900) (13400) (23800) (18100) (30100) (25800) (42200) (40300)
0.0 m 4850* 3750 9550 5800 11650* 7800 15050* 10950 21200* 17050 9700* 9700*
(0') (10700) (8300) (21000) (12800) (25700) (17200) (33200) (24200) (46700) (37600) (21400) (21400)
1.5 m 5550* 3950 9350 5650 12100* 7500 16650* 10500 21750* 16450 12350* 12350*
(5') (12300) (8800) (20600) (12400) (26700) (15500) (34600) (23200) (47900) (36300) (27200) (27200)
3.0 m 6650* 4350 8250 5550 11950* 7350 15450* 10350 21000* 16300 16150* 16150*
(10') (14700) (9700) (20400) (12200) (26400) (16200) (34100) (22800) (48900) (35900) (35800) (35800)
4.5 m 7550* 5150 8500* 5600 11050* 7350 14300* 10350 19100* 15400 21100* 21100*
(15') (16600) (11300) (18700) (12300) (24400) (16200) (31600) (22800) (42200) (36200) (46500) (46500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-63
LIFTING CAPACITY
PC400SE-6
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 2.8 m3 (3.66 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2490 mm (7'10")
7.5 m *9100 7350 *9300 8250
(25') (20050) (16200) (20500) (18200)
6.0 m *8900 5900 *9750 8100
(20') (19600) (13000) (21500) (17850)
4.6 m *8850 5150 *9050 5500 *10500 7750 *12950 11250 *17750 *11750
(15') (19500) (11350) (19950) (12150) (23150) (17100) (28550) (24800) (39150) (39150)
3.0 m 7550 4750 8350 5300 *11300 7300 *14150 10000
(10') (16650) (10450) (18450) (11700) (24900) (16100) (31200) (22050)
1.5 m 7400 4600 8150 5100 *11900 6950 *15450 9750
(5') (16300) (10150) (17900) (11250) (26250) (15300) (34050) (21500)
0m 7600 4700 8000 5000 *10750 6700 *15600 9400 *18450 14650
(0') (16800) (10350) (17700) (11000) (23700) (14750) (34400) (20700) (40700) (32300)
1.5 m *9250 5150 *11600 6600 *14900 9350 *19100 14800
(5') (20400) (11350) (25550) (14550) (32850) (20600) (42100) (32650)
3.0 m *9200 6100 *10200 6700 *13250 9500 *16700 15150 *19500 *19500
(10') (20300) (13450) (22500) (14750) (29200) (20950) (36800) (33400) (43000) (43000)
4.6 m *8600 8250 *9850 9500 *12900 *12900
(15') (18950) (18200) (21700) (20950) (28450) (28450)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-64
LIFTING CAPACITY
PC400LC-6
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5750* 5750*
(25') (12700) (12700)
6.1 m 5750* 5200 8300* 6050 9000* 8500
(20') (12600) (11400) (18300) (13300) (19900) (18800)
4.6 m 5900* 4600 8750 5900 9900* 8150 11800* 11800*
(15') (13000) (10200) (19300) (13000) (21800) (18000) (26000) (26000)
3.0 m 6200* 4300 9250* 5650 10900* 7750 13650* 11000 19000* 17150
(10') (13700) (9500) (20400) (12500) (24000) (17000) (30100) (24300) (41900) (37800)
1.5 m 6750 4200 9350 5450 11750* 7300 15150* 10300 21450* 15800
(5') (14900) (9200) (20600) (12000) (26000) (16200) (33400) (22700) (47300) (34800)
0m 7500 4250 9150 5250 12200 7000 15900* 9850 21100* 15150
(0') (15500) (9400) (20100) (11600) (26900) (15500) (35000) (21700) (46500) (33500)
1.5 m 8000 4550 9050 5150 12000 6850 15800* 9600 21250* 15050 13550* 13550*
(5') (17600) (10100) (19900) (11400) (26500) (15100) (34800) (21200) (46800) (33100) (29500) (29500)
3.0 m 8650 5200 8700* 5200 11450* 6850 14750* 9600 19400* 15150 19650* 19650*
(10') (19100) (11400) (19200) (11500) (25300) (15100) (32600) (21200) (42800) (33400) (43400) (43400)
4.6 m 8450* 6450 9500* 7000 12650* 9800 16350* 15500 21300* 21300*
(15') (18700) (14200) (20900) (15500) (27800) (21500) (36100) (34200) (47000) (47000)
6.1 m 7500* 7500* 8400* 8400* 11350* 11350*
(20') (16600) (16600) (18500) (18500) (25000) (25000)
Arm length 2900 mm (9'6")
7.6 m 8900* 7200 9100* 8550
(25') (19600) (15800) (20000) (18800)
6.1 m 8750* 5900 8800* 5950 9550* 8350
(20') (19300) (13000) (19400) (13100) (21100) (18500)
4.6 m 8800* 5200 9100* 5800 10350* 8050 12500* 11600 16500* 16500*
(15') (19400) (11500) (20100) (12800) (22900) (17700) (27500) (25600) (36400) (36400)
3.0 m 8250 4800 9500 5600 11300* 7600 14200* 10800 20050* 16600*
(10') (18200) (10600) (21000) (12300) (24900) (16800) (31300) (23800) (44200) (36600)
1.5 m 8100 4650 9300 5400 12050* 7250 15500* 10150 20200* 15450
(5') (17900) (10300) (20500) (11900) (26500) (16000) (34200) (22400) (44500) (34000)
0m 8300 4750 9150 5250 12150 7000 15950* 9750 21800* 15050
(0') (18300) (10500) (20100) (11600) (26800) (15400) (35200) (21500) (48000) (33200)
1.5 m 8950 5150 9050 5200 12050 6850 15600* 9600 20550* 15050 15300* 15300*
(5') (19700) (11300) (20000) (11500) (26500) (15100) (34300) (21200) (45400) (33200) (33800) (33800)
3.0 m 9450* 5950 11050* 6900 14250* 9650 18400* 15250* 23450* 23450*
(10') (20900) (13100) (24400) (15200) (31400) (21300) (40600) (33600) (61700) (61700)
4.6 m 9200* 7700 11650* 9950 14900* 14900* 18450* 18450*
(15') (20300) (17000) (25700) (21900) (32900) (32900) (40700) (40700)
Arm length 2400 mm (7'10")
7.6 m 9700* 7950 9800* 8400
(25') (21400) (17500) (21600) (18500)
6.1 m 9500 6450 10150* 8250
(20') (20900) (14200) (22300) (18200)
4.6 m 9450* 5600 9500* 5750 10850* 7950 13200* 11400 17550* 17550
(15') (20800) (12400) (21000) (12700) (24000) (17500) (29100) (25200) (38700) (38700)
3.0 m 8850 5200 9500 5600 11700* 7550 14800* 10650
(10') (19500) (11500) (20900) (12300) (25800) (16700) (32600) (23500)
1.5 m 8700 5050 9300 5400 12300* 7250 15850* 10050
(5') (19200) (11200) (20500) (12000) (27100) (16000) (34900) (22200)
0m 8950 5200 9200 5300 12200 7000 16000* 9750 19950* 15050
(0') (19700) (11400) (17600) (11700) (26900) (15500) (35300) (21500) (44000) (33200)
1.5 m 9750 5650 12000* 6950 15300* 9650 19700* 15150
(5') (21500) (12400) (26400) (15300) (33800) (21300) (43400) (33400)
3.0 m 9750* 6650 10500* 7050 13650* 9800 17200* 15450 20350* 20350*
(10') (21600) (14600) (23100) (15600) (30100) (21600) (37900) (34000) (44900) (44900)
4.6 m 9150* 8900 10400* 10150 13250* 13250*
(15') (20100) (19600) (23000) (22400) (29200) (29200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-65
LIFTING CAPACITY
PC400LC-6
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4800 mm (15'9")
7.6 m 3850* 3850*
(25') (8400) (8400)
6.1 m 3800* 3800* 6050* 4650 7000* 6400
(20') (8400) (8400) (13300) (10200) (15400) (14100)
4.6 m 3850* 3650 7000* 4550 7550* 6150
(15') (8500) (8100) (15500) (10000) (16700) (13600)
3.0 m 4050* 3450 7400* 4350 8250* 5850 9500* 8100 11500* 11500*
(10') (8900) (7600) (16300) (9600) (18200) (12900) (21000) (17800) (25400) (25400)
1.5 m 4350* 3350 7300 4200 8950* 5550 10650* 7550 13500* 10750 18850* 16800
(5') (9600) (7400) (16100) (9200) (19700) (12300) (23500) (16700) (29800) (23800) (41600) (37100)
0m 4800* 3350 7100 4050 9200 5300 11600* 7100 14950* 10050 21100* 15550 9550* 9550*
(0') (10600) (7100) (15700) (8900) (20300) (11700) (25500) (15700) (33000) (22100) (46500) (34300) (21100) (21100)
1.5 m 5450* 3550 7000 3900 8950 5100 12000 6800 15650* 9600 21750* 14950 12050* 12050*
(5') (12100) (7800) (15500) (8700) (19800) (11200) (26400) (15000) (34500) (21100) (47900) (32900) (26600) (26600)
3.0 m 6500* 3900 6850* 3900 8850 5000 11800 6650 15500* 9350 21100* 14750 15750* 15750*
(10') (14400) (8600) (15100) (8600) (19500) (11000) (26000) (14700) (34200) (20700) (46600) (32500) (34700) (34700)
4.6 m 7550* 4500 8650* 5050 11200* 6650 14450* 9350 19350* 14850 20600* 20600*
(15') (16600) (1000) (19000) (11100) (24600) (14700) (31900) (20700) (42600) (32700) (45500) (45500)
6.1 m 7400* 5800 9150* 6850 12200* 9600 16150* 15200 22350* 22350*
(20') (16300) (12800) (20200) (15100) (26900) (21100) (35600) (33500) (49300) (49300)
Arm length 4000 mm (13'1")
7.6 m 4900* 4900* 7200* 6250
(25') (10900) (10900) (15900) (13800)
6.1 m 4900* 4700 7750* 6200
(20') (10800) (10400) (17100) (13600)
4.6 m 5000 4200 6300* 4400 8200* 6000 9250* 8300
(15') (11100) (9300) (13900) (9700) (18100) (13200) (20300) (18300)
3.0 m 5300* 3390 7350 4250 8800* 5700 10300* 7850 12750* 11250 17200* 17200
(10') (11700) (8600) (16200) (9400) (19400) (12600) (22700) (17300) (28100) (24800) (37900) (37900)
1.5 m 5750* 3800 7200 4100 9350 5450 11300* 7400 14450* 10450 20400* 16100
(5') (12700) (8400) (15900) (9100) (20600) (12000) (24900) (16300) (31900) (23000) (45000) (35500)
0m 6400* 3850 7100 4000 9100 5250 12000* 7000 15500* 9850 21750* 15200 8850* 8850*
(0') (14100) (8500) (15600) (8800) (20100) (11500) (26400) (15500) (34200) (21700) (47900) (33500) (19600) (19600)
1.5 m 7250 4100 8950 5100 11950 6800 15750* 9500 21550* 14850 12950* 12950*
(5') (16000) (9000) (19800) (11200) (26400) (15000) (34800) (21000) (47600) (32800) (28500) (28500)
3.0 m 8050 4550 8950 5050 11750* 6700 15150* 9450 20250* 14850 17950* 17950*
(10') (17800) (10100) (19700) (11200) (25900) (14800) (33400) (20800) (44700) (32800) (39500) (39500)
4.6 m 8150* 5500 10400* 6800 13550* 9550 17750* 15100 24300* 24300*
(15') (18000) (12200) (22900) (15000) (29800) (21000) (39200) (33300) (63500) (63500)
6.1 m 7750* 7500 10350* 9900 13650* 13650* 17850* 17850*
(20') (17100) (16600) (22800) (21800) (30100) (30100) (39400) (39400)
3C-66
LIFTING CAPACITY
PC400LC-6 EXCEL
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5800* 5800*
(25') (12800) (12800)
6.1 m 5800* 5150 8350* 6000 9050* 8450
(20') (12700) (11400) (18500) (13300) (20000) (18700)
4.6 m 5950* 4600 8800* 5850 9950* 8100 11850* 11750
(15') (13100) (10200) (19400) (12900) (21900) (17800) (26100) (26000)
3.0 m 6250* 4300 9300 5650 10950* 7700 13700* 10950 19050* 17050
(10') (13800) (9500) (20500) (12400) (24100) (17000) (30200) (24200) (42000) (37600)
1.5 m 6800* 4200 9250 5400 11800* 7300 15200* 10250 21500* 15650
(5') (15000) (9200) (20400) (11900) (26100) (16100) (33500) (22600) (47400) (34500)
0m 7450 4250 9050 5250 12100 7000 15950* 9750 21150* 15050
(0') (16400) (9400) (20000) (11500) (26700) (15400) (35100) (21600) (46600) (33200)
1.5 m 7950 4550 8950 5150 11950 6800 15850* 9550 21250* 14900 13400* 13400*
(5') (17500) (10000) (19800) (11300) (26300) (15000) (34900) (21000) (46900) (32900) (29600) (29600)
3.0 m 8700* 5150 8750* 5200 11500* 6800 14800* 9550 19450* 15050 19750* 19750*
(10') (19200) (11400) (19300) (11400) (25400) (15000) (32700) (21000) (42900) (33100) (43500) (43500)
4.6 m 8500* 6400 9550* 6950 12700* 9750 16400* 15400 21350* 21350*
(15') (18800) (14100) (21000) (15400) (28000) (21400) (36200) (33900) (47100) (47100)
6.1 m 7550* 7550* 8450* 8450* 11400* 11400*
(20') (16700) (16700) (18600) (18600) (25100) (25100)
Arm length 2900 mm (9'6")
7.6 m 8900* 7100 9100* 8450
(25') (19600) (15700) (20000) (18700)
6.1 m 8750* 5850 8800* 5850 9550* 8300
(20') (19300) (12900) (19400) (12900) (21100) (18300)
4.6 m 8700 5150 9100* 5750 10350* 7950 12500* 11500 16500* 16500*
(15') (19200) (11300) (20100) (12600) (22900) (17500) (27500) (25300) (36400) (36400)
3.0 m 8150 4750 9400 5550 11300* 7550 14200* 10700 20050* 16450
(10') (18000) (10500) (20700) (12200) (24900) (16600) (31300) (23600) (44200) (36300)
1.5 m 8000 4600 9200 5350 12050* 7150 15500* 10050 20200* 15300
(5') (17700) (10200) (20300) (11800) (26500) (15800) (34200) (22100) (44500) (33700)
0m 8200 4700 9000 5200 12050 6900 15950* 9650 21800* 14900
(0') (18100) (10400) (19900) (11400) (26500) (15200) (35200) (21300) (48000) (32800)
1.5 m 8850 5050 8950 5150 11900 6800 15600* 9500 20550* 14900 15300* 15300*
(5') (19500) (11200) (19800) (11300) (26200) (15000) (34300) (20900) (45400) (32800) (33800) (33800)
3.0 m 9450* 5900 11050* 6800 14250* 9550 18400* 15100 23450* 23450*
(10') (20900) (13000) (24400) (15100) (31400) (21100) (40600) (33300) (61700) (61700)
4.6 m 9200* 7600 11650* 9800 14900* 14900* 18450* 18450*
(15) (20300) (16800) (25700) (21700) (32900) (32900) (40700) (40700)
Arm length 2400 mm (7'10")
7.6 m 9700* 7850 9800* 8350
(25') (21400) (17300) (21600) (18400)
6.1 m 9500* 6350 10150* 8200
(20') (20900) (14000) (22300) (18100)
4.6 m 9350 5550 9500* 5700 10850* 7850 13200* 11300 17550* 17350*
(15') (20600) (12300) (21000) (12600) (24000) (17400) (29100) (24900) (38700) (38300)
3.0 m 8750 5150 9400 5550 11700* 7500 14800* 10550
(10') (19300) (11300) (20700) (12200) (25800) (16500) (32600) (23200)
1.5 m 8600 5000 9200 5350 12300 7150 15850* 9950
(5') (19000) (11000) (20300) (11800) (27100) (15800) (34900) (21900)
0m 8850 5100 9100 5250 12050 6950 16000* 9650 19950* 14900
(0') (19500) (11300) (20000) (11600) (26600) (15300) (35300) (21200) (44000) (32800)
1.5 m 9650 5550 11950 6850 15300 9500 19700* 15000
(5') (21200) (12300) (26400) (15100) (33800) (21100) (43400) (33100)
3.0 m 9750* 6550 10500* 6950 13650* 9700 17200* 15300 20350* 20350*
(10') (21600) (14500) (23100) (15400) (30100) (21400) (37900) (33700) (44900) (44900)
4.6 m 9150* 8800 10400* 10050 13250* 13250*
(15) (20100) (19400) (23000) (22200) (29200) (29200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-67
LIFTING CAPACITY
PC400LC-6 EXCEL
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4800 mm (15'9")
7.6 m 3850* 3850*
(25') (8400) (8400)
6.1 m 3800* 3800* 6050* 4600 7000* 6350
(20') (8400) (8400) (13300) (10100) (15400) (14000)
4.6 m 3850* 3650 7000* 4450 7550* 6100
(15') (8500) (8000) (15500) (9900) (16700) (13400)
3.0 m 4050* 3400 7400* 4300 8250* 5800 9500* 8000 11500* 11500*
(10') (8900) (7500) (16300) (9500) (18200) (12800) (21000) (17600) (25400) (25400)
1.5 m 4350* 3300 7200 4150 8950* 5500 10650* 7500 13500* 10650 18850* 16650
(5') (9600) (7300) (15900) (9100) (19700) (12100) (23500) (16600) (29800) (23500) (41600) (36700)
0m 4800* 3300 7050 4000 9100 5250 11600* 7050 14950* 9950 21100* 15400 9550* 9550*
(0') (10600) (7300) (15500) (8800) (20000) (11500) (25500) (15500) (33000) (21900) (46500) (34000) (21100) (21100)
1.5 m 5450* 3500 6900 3850 8850 5050 11850 6750 15650* 9450 21750* 14800 12050* 12050*
(5') (12100) (7700) (15300) (8500) (19600) (11100) (26100) (14800) (34500) (20900) (47900) (32600) (26600) (26600)
3.0 m 6500* 3850 6850* 3850 8750 4950 11700 6650 15500* 9250 21100* 14600 15750* 15750*
(10') (14400) (8400) (15100) (8500) (19300) (10900) (25700) (14500) (34200) (20400) (46600) (32200) (34700) (34700)
4.6 m 7550* 4500 8650* 4850 11200* 6550 14450* 9250 19350* 14700 20600* 20600*
(15') (16600) (9900) (19000) (10900) (24600) (14500) (31900) (20400) (42600) (32400) (45500) (45500)
6.1 m 7400* 5750 9150* 6750 12200* 9500 16150* 15050 22350* 22350*
(20') (16300) (12700) (20200) (14900) (26900) (20900) (35600) (33200) (49300) (49300)
Arm length 4000 mm (13'1")
7.6 m 4900* 4900* 7200* 6200
(25') (10900) (10900) (15900) (13700)
6.1 m 4900* 4650 7750* 6100
(20') (10800) (10200) (17100) (13500)
4.6 m 5000* 4150 6300* 4300 8200* 5900 9250* 8200
(15') (11100) (9100) (13900) (9500) (18100) (13000) (20300) (18100)
3.0 m 5300* 3850 7300 4200 8800* 5650 10300* 7750 12750* 11150 17200* 17200
(10') (11700) (8500) (16000) (9300) (19400) (12500) (22700) (17100) (28100) (24600) (37900) (37900)
1.5 m 5750* 3750 7150 4050 9250 5440 11300* 7300 14450* 10300 20400* 15950
(5') (12700) (8300) (15700) (9000) (20400) (11900) (24900) (16100) (31900) (22800) (45000) (35200)
0m 6400* 3800 7000 3950 9000 5150 12000* 6950 15500* 9750 21750* 15050 8850* 8850*
(0') (14100) (8400) (15400) (8700) (19900) (11400) (26400) (15300) (34200) (21500) (47900) (33200) (19600) (19600)
1.5 m 7150 4100 8850 5050 11800 6700 15750* 9400 21550* 14700 12950* 12950*
(5') (15800) (8900) (19500) (11100) (26100) (14800) (34800) (20800) (47600) (32400) (28500) (28500)
3.0 m 7950 4500 8850 5000 11750 6600 15150* 9300 20250* 14700 17950* 17950*
(10') (17600) (9900) (19500) (11000) (25900) (14800) (33400) (20600) (44700) (32400) (39500) (39500)
4.6 m 8150* 5450 10400* 6700 13550* 9450 17750* 14950 24300* 24300*
(15') (18000) (12200) (22900) (14800) (29800) (20800) (39200) (33000) (63500) (63500)
6.1 m 7750* 7450 10350* 9800 13650* 13650* 17850* 17850*
(20') (17100) (16400) (22800) (21600) (30100) (30100) (39400) (39400)
3C-68
LIFTING CAPACITY
3C-69
LIFTING CAPACITY
3C-70
LIFTING CAPACITY
PC450-6 MIGHTY
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5050* 5050*
(25') (11100) (11100)
6.1 m 5000* 4700 7850* 5550 8550* 8050
(20') (11100) (10400) (17300) (12300) (18900) (17700)
4.6 m 5150* 4100 8250* 5400 9400* 7650 11300* 11300*
(15') (11400) (9100) (18200) (11900) (20800) (16900) (25000) (25000)
3.0 m 5500* 3800 8100 5150 10400* 7200 13100* 10450 18400* 16450
(10') (12100) (8400) (17900) (11400) (22900) (15900) (28900) (23000) (40600) (36300)
1.5 m 6000* 3700 7850 4900 10650 5800 14550* 9650 20750* 14950
(5') (13300) (8100) (17300) (10800) (23500) (14900) (32100) (21300) (45800) (33300)
0m 6200 3750 7650 4750 10300 6450 14800 9150 21250* 14300
(0') (13600) (8300) (16900) (10400) (22700) (14200) (32700) (20200) (46900) (31500)
1.5 m 6650 4050 7550 4650 10100 6250 14550 8950 20500* 14150 14250* 14250*
(5') (14500) (8900) (16600) (10200) (22300) (13800) (32100) (19700) (42500) (31200) (31400) (31400)
3.0 m 7550 4650 7600 4700 10100 6250 14150* 8900 18700* 14300 21100* 21100*
(10') (16600) (10300) (16700) (10300) (22300) (13800) (31200) (19700) (41200) (31500) (46500) (46500)
4.6 m 7900* 5900 8950* 6450 12000* 9150 15650* 14650 20450* 20450*
(15') (17400) (13000) (19700) (14200) (26500) (20100) (34500) (32300) (45100) (45100)
6.1 m 6900* 6900* 7800* 7800* 10700* 10700*
(20') (15200) (15200) (17200) (17200) (23600) (23600)
PC450LC-6 MIGHTY
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.80 m3 (2.35 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.6 m 5050* 5050*
(25') (11100) (11100)
6.1 m 5000* 4800 7850* 5700 8550* 8200
(20') (11100) (10500) (17300) (12500) (18900) (18100)
4.6 m 5150* 4200 8250* 5500 9400* 7800 11300* 11300*
(15') (11400) (9300) (18200) (12200) (20800) (17200) (25000) (25000)
3.0 m 5500* 3900 8750 5300 10400* 7350 13100* 10650 18400* 16750
(10') (12100) (8600) (19300) (11600) (22900) (16200) (28900) (23500) (40600) (36900)
1.5 m 6000 3800 8950 5050 11250* 6900 14550* 9850 20750* 15250
(5') (13300) (8400) (19800) (11100) (24800) (15300) (32100) (21800) (45800) (33600)
0m 6850 3850 8750 4850 11700* 6600 15250* 9350 21250* 14600
(0') (15100) (8500) (19300) (10700) (25600) (14500) (33700) (20600) (46900) (32200)
1.5 m 7600 4150 8650 4750 11600 5400 15150* 9100 20500* 14450 14250* 14250*
(5') (16600) (9200) (19100) (10500) (25600) (14200) (33400) (20100) (45200) (31800) (31400) (31400)
3.0 m 8100 4750 8150* 4800 10900* 6400 14150* 9100 18700* 14550 21100* 21100*
(10') (17900) (10500) (18000) (10600) (24000) (14100) (31200) (20100) (41200) (32100) (46500) (46500)
4.6 m 7900* 6000 8950* 6600 12000* 9350 15650* 14950 20450* 20450*
(15') (17400) (13300) (19700) (14500) (26500) (20600) (34500) (33000) (45100) (45100)
6.1 m 6900* 6900* 7800* 7800* 10700* 10700*
(20') (15200) (15200) (17200) (17200) (23600) (23600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-71
LIFTING CAPACITY
3C-72
LIFTING CAPACITY
3C-73
LIFTING CAPACITY
3C-74
LIFTING CAPACITY
3C-75
LIFTING CAPACITY
PC600-6
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m 8000* 8000*
(30') (17600) (17600)
6.1 m 7900* 7250 10150* 8950 11450* 11450*
(20') (17400) (16000) (22400) (19700) (25300) (25300)
3.0 m 8150 6050 11000 8300 14000* 11400 18200* 16350
(10') (18000) (13300) (24200) (18300) (30800) (25100) (40100) (86100)
0m 8200 6050 10350 7700 13500 9950 20100* 14800 14500* 14500*
(0') (18100) (18300) (22900) (17000) (29800) (21900) (44300) (32700) (32000) (32000)
3.0 m 10150 7550 10350 7650 13500 9950 18100* 14800 23150* 23150* 20950* 20950*
(10') (22400) (16600) (22800) (16900) (29800) (22000) (39900) (32600) (51000) (51000) (46200) (46200)
6.1 m 9250* 9250* 10400* 10400* 13550* 13550*
(20') (20500) (20500) (22900) (22900) (29800) (29800)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m 7550* 7550* 8400* 8400*
(30') (16600) (16600) (18500) (18500)
6.1 m 7450* 7450* 10100* 8650 11300* 11300*
(20') (16400) (16400) (22300) (19100) (24900) (24900)
3.0 m 8550* 6300 10850 8150 13800* 11400 17200* 15900 23350* 23350*
(10') (18800) (18900) (24000) (17900) (30400) (25100) (38000) (35100) (51500) (51500)
0m 8700 6350 10300 7600 14100 10450 20000* 15050 19500* 19500*
(0') (19200) (14000) (22700) (16800) (31000) (23000) (44100) (33200) (43000) (43000)
3.0 m 10900* 8150 13750* 10300 17900* 14950 23300* 23300* 23850* 23850*
(10') (24000) (18000) (30300) (22700) (39500) (38000) (51300) (51800) (52500) (52500)
3C-76
LIFTING CAPACITY
PC600-6
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m 8750* 8750*
(30') (19300) (19300)
6.1 m 8300* 8300* 11700* 11700*
(20') (18300) (18300) (25800) (25800)
3.0 m 9300 7050 10850 8150 13950* 11550 17650* 17100 24700* 24700*
(10') (20500) (15600) (24000) (17900) (30800) (25500) (38900) (37700) (54500) (54500)
0m 9650 7100 10350 7650 14150 10550 19000* 13900 28100* 24650*
(0') (21300) (15700) (22800) (16800) (31200) (23200) (41900) (30600) (61900) (54400)
3.0 m 11650 9350 13200* 10400 16800* 13850 23750* 23750* 29900* 29900*
(10') (25700) (20700) (29200) (23000) (37100) (30600) (52300) (52300) (65900) (65900)
3C-77
LIFTING CAPACITY
PC600LC-6
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m 8000* 8000*
(30') (17600) (17600)
6.1 m 7900* 7400 10150* 9100 11450* 11450*
(20') (17400) (16400) (22400) (20100) (25300) (25300)
3.0 m 8900* 6200 11500* 8450 14000* 11650 18200* 16650
(10') (19700) (13600) (25400) (18700) (30800) (25600) (40100) (36800)
0m 9500 6200 12000 7900 15000* 10200 20100* 15150 14500* 14500*
(0') (21000) (13700) (26400) (17400) (33100) (22400) (44300) (33400) (32000) (32000)
3.0 m 10600* 7700 10850* 7850 13850* 10200 18100* 15100 23150* 23150* 20950* 20950*
(10') (23300) (17000) (23900) (17300) (80600) (22500) (39900) (33300) (51000) (51000) (46200) (46200)
6.1 m 9250* 9250* 10400* 10400* 13550* 13550*
(20') (20500) (20500) (22900) (22900) (29800) (29800)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m 7550* 7550* 8400* 8400*
(30') (16600) (16600) (18500) (18500)
6.1 m 7450* 7450* 10100* 8850 11300* 11300*
(20') (16400) (16400) (22300) (19500) (24900) (24900)
3.0 m 8550* 6450 11350* 8300 13800* 11600 17200* 16200 23350* 23350*
(10') (18800) (14300) (25100) (18300) (30400) (25600) (38000) (35700) (51500) (51500)
0m 10100 6500 11900 7800 15250* 10650 20000* 15350 19500* 19500*
(0') (22200) (14400) (26800) (17200) (33600) (23500) (44100) (33800) (48000) (48000)
3.0 m 10900* 8350 13750* 10550 17900* 15250 23300* 23300* 23850* 23850*
(10') (24000) (18400) (30300) (23200) (39500) (33600) (51300) (51300) (52500) (52500)
3C-78
LIFTING CAPACITY
PC600LC-6
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m 8750* 8750*
(30') (19300) (19300)
6.1 m 8300* 8300* 11700* 11700*
(20') (18300) (18300) (25800) (25800)
3.0 m 9300* 7200 11700* 8350 13950* 11800 17650* 17400 24700* 24700*
(10') (20500) (15900) (25800) (18400) (30800) (26000) (38900) (38400) (54500) (54500)
0m 11200 7300 11950 7800 15400* 10750 19000* 14200 28100* 25150
(0') (24600) (16100) (26400) (17300) (33900) (23700) (41900) (31300) (61900) (55500)
3.0 m 11650* 9350 13200* 10650 16800* 14200 23750* 23750* 29900* 29900*
(10') (25700) (20700) (29200) (23500) (37100) (31300) (52300) (52300) (65900) (65900)
3C-79
LIFTING CAPACITY
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.7 m3 (3.53 cu.yd), Shoes: 900 mm (35.4")
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
6.1 m *8750 8150 *11350 9950 *12750 *12750
(20') (19300) (18000) (25100) (21900) (28100) (28100)
3.0 m *9850 6850 *12850 9300 *15550 12650 *20200 18100
(10') (21700) (15100) (28400) (20500) (34300) (27900) (44500) (39900)
0m 10400 6900 13050 8700 *16750 11200 *22300 16550 *15900 *15900
(0') (23000) (15200) (28800) (19200) (36900) (24700) (49200) (36500) (35000) (35000)
3.0 m *11900 8550 *12200 8700 *15550 11250 *20200 16500 *25750 *25750 *22800 *22800
(10') (26300) (18800) (26900) (19200) (34300) (24800) (44500) (36400) (56800) (56800) (50300) (50300)
6.1 m *10550 *10550 *11800 *11800 *15300 *15300
(20') (23300) (23300) (26000) (26000) (33700) (33700)
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.4 m3 (3.14 cu.yd), Shoes: 750 mm (29.5")
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4200 mm (14'0")
6.1 m *6400 *6400 *10300 9950
(20') (14100) (14100) (22800) (21900)
3.0 m *7150 5850 *12050 9150 *14450 12600 *18550 18150 *26750 *26750
(10') (15700) (12900) (26600) (20200) (31900) (27800) (40900) (40100) (59000) (59000)
0m *8900 5800 12700 8400 *16650 11350 *21800 16150 *17850 *17850
(0') (19600) (12800) (28000) (18600) (36700) (26100) (48000) (35700) (39400) (39400)
3.0 m 10650 7000 12450 8200 *15850 10600 *20850 15800 *27500 25900 *19350 *19350
(10') (23400) (15400) (27400) (18100) (34900) (23400) (45900) (34800) (60600) (57100) (42700) (42700)
6.1 m *10500 *10500 *10700 *10700 *14750 *14750 *19000 *19000 *24350 *24350
(20') (23200) (23200) (23600) (23600) (32500) (32500) (41900) (41900) (53700) (53700)
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.4 m3 (3.14 cu.yd), Shoes: 900 mm (35.4")
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4200 mm (14'0")
6.1 m *6400 *6400 *10300 *10100
(20') (14100) (14100) (22800) (22300)
3.0 m *7150 5950 *12050 9300 *14450 12800 *18550 18450 *26750 *26750
(10') (15700) (13100) (26600) (20500) (31900) (28200) (40900) (40600) (59000) (59000)
0m *8900 5950 12900 8600 *16650 11550 *21800 16450 *17850 *17850
(0') (19600) (13100) (28500) (18900) (36700) (25500) (48000) (36200) (39400) (39400)
3.0 m *10800 7100 12650 8350 *15850 10800 *20850 16050 *27500 26350 *19350 *19350
(10') (23900) (16700) (27900) (18400) (34900) (23800) (45900) (35400) (60600) (58000) (42700) (42700)
6.1 m *10500 *10500 *10700 *10700 *14750 *14750 *19000 *19000 *24350 *24350
(20') (23200) (23200) (23600) (23600) (32500) (32500) (41900) (41900) (53700) (53700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-80
LIFTING CAPACITY
3C-81
LIFTING CAPACITY
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8000 *8000
(30') (17600) (17600)
6.1 m *7900 7400 *10150 9100 *11450 *11450
(20') (17350) (16250) (22300) (20000) (25200) (25200)
3.0 m *8900 6200 *11500 8450 *14000 11650 *18200 16650
(10') (19550) (13600) (25300) (18600) (30800) (25600) (40000) (36600)
0m 9500 6200 12000 7900 *15000 10200 *20100 15150 *14500 *14500
(0') (20900) (13600) (26400) (17350) (33000) (22400) (44000) (33300) (31900) (31900)
3.0 m *10600 7700 *10850 7850 *13850 10200 *18100 15100 *23150 *23150 *20950 *20950
(10') (23300) (16900) (23850) (17250) (30450) (22400) (39800) (33200) (50900) (50900) (46100) (46100)
6.1 m *9250 *9250 *10400 *10400 *13550 *13550
(20') (20350) (20350) (22850) (22850) (29800) (29800)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8850 *8850
(30') (19450) (19450)
6.1 m *8750 7400 *11350 9100 *12750 *12750
(20') (19250) (16250) (24950) (20000) (28050) (28050)
3.0 m *9400 6200 12600 8450 *15550 11650 *20150 16650
(10') (20650) (13600) (27700) (18600) (34200) (25600) (44300) (36600)
0m 9500 6200 12000 7900 15700 10200 *22300 15150 *15900 *15900
(0') (20900) (13600) (26400) (17350) (34500) (22400) (49050) (33300) (34950) (34950)
3.0 m 11750 7700 11950 7850 *15550 10200 *20200 15100 *25750 24900 *22800 *22800
(10') (25850) (16900) (26300) (17250) (34200) (22400) (44400) (33200) (56650) (54750) (50150) (50150)
6.1 m *10550 *10550 *11800 *15300 *15300
(20') (23200) (23200) (25950) (33650) (33650)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-82
LIFTING CAPACITY
PC750-6
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *9350 *8650 *12950 12700 *15150 *15150 *18900 *18900
(19') (20600) (19100) (28500) (28000) (33400) (33400) (41700) (41700)
3.0 m 9650 7350 14750 11400 *18450 14850 *25700 21900
(9') (21300) (16200) (32500) (25200) (40700) (32800) (56700) (48300)
0m 9800 7350 13750 10450 18550 14100 26900 20100
(0') (21600) (16200) (30300) (23000) (40900) (31000) (59300) (44300)
3.0 m 12000 9100 13500 10250 18300 13850 *24850 20150 *29350 *29350 *21350 *21350
(9') (26500) (20000) (29800) (22600) (40300) (30500) (54800) (44500) (64700) (64700) (47100) (47100)
6.0 m *14350 *14350 *17000 *17000
(19') (31600) (31600) (37500) (37500)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *10550 8650 *14800 12700 *17250 *17250 *21350 *21350
(19') (23300) (19100) (32700) (28000) (38000) (38000) (47100) (47100)
3.0 m 9650 7350 14750 11400 19400 14850 28850 21900
(9') (21300) (16200) (32500) (25200) (42800) (32800) (63700 (48300)
0m 9800 7350 13750 10450 18550 14100 26900 20100
(0') (21600) (16200) (30300) (23000) (40900) (31000) (59300) (44300)
3.0 m 12000 9100 13500 10250 18300 13850 26950 20150 *32500 *32500 *23750 *23750
(9') (26500) (20000) (29800) (22600 (40300) (30500) (59500) (44500) (71700) (71700) (52300) (52300)
6.0 m *16650 *16650 *19700 *19700
(19') (36800) (36800) (43400) (43400)
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
6.0 m *4550 *4550 *6850 *6850
(19') (10000) (10000) (15100) (15100)
3.0 m *5300 *5300 *9500 7400 *12650 *12650 *15500 *15500 *20450 *20450
(9') (11700) (11700) (20900) (16300) (27900) (27900) (34200) (34200) (45100) (45100)
0m *6950 5800 9000 6750 *15000 11600 19050 15750 *25600 22550 *13650 *13650
(0') (15300) (12800) (19800) (14900) (33100) (25600) (42000) (34700) (56400) (49700) (30100) (30100)
3.0 m 8950 6650 14250 10850 19350 14700 -26100 *21350 *21100 *21100 *13900 *13900
(9') (19700) (14700) (31400) (23900) (42700) (32400) (57600) (47100) (46500) (46500) (30600) (30600)
6.0 m *11750 9650 *13450 10950 *16550 13950 *22400 21700 *29850 *29850 *25250 *25250
(19') (25900) (21200) (29600) (24100) (36400) (30800) (49400) (47900) (65800) (65800) (55600) (55600)
3C-83
LIFTING CAPACITY
PC750-6
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
6.0 m *7500 7500 *11500 *11500
(19') (16600) (16500) (25400) (25400)
3.0 m 8450 6350 8650 6500 *14150 11650 *17500 15950 *23400 22950
(9') (18700) (14000) (19000) (14300) (31200) (25700) (38600) (35200) (51600) (50600)
0m 8450 6250 13700 10400 18600 14100 *27000 20200 *13600 *13600
(0') (18600) (13800) (30200) (23000) (41000) (31100) (59500) (44500) (30000) (30000)
3.0 m 10000 7450 13200 9900 17950 13500 *25950 19700 *25600 *25600 *17800 *17800
(9') (22000) (16400) (29100) (21900) (39600) (29800) (57300) (43400) (56400) (56400) (39300) (39300)
6.0 m *13850 12100 *15800 14000 *20350 *20350 *26300 *26300
(19') (30500) (26600) (34800) (30900) (44900) (44900) (58000) (58000)
3C-84
LIFTING CAPACITY
PC750SE-6
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.0 m3 (5.23 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m *13600 10850 *13800 11600 *15600 *15600 *18800 *18800
(19') (30000) (23900) (30400) (25600) (34400) (34400) (41500) (41500)
3.0 m 11800 8900 14100 10750 *19050 15100 *25300 21950
(9') (26000) (19600) (31100) (23700) (42000) (33300) (55800) (48400)
0m 12250 9200 13350 10050 18350 13850 27000 20150 *27550 *27550
(0') (27000) (20300) (29400) (22100) (40400) (30500) (59600) (44400) (60800) (60800)
3.0 m *16000 12800 *17500 13950 *23150 20450 *29900 *29900 *37500 *37500
(9') (35200) (28200) (38600) (30800) (51000) (45100) (66000) (66000) (82700) (82700)
3C-85
LIFTING CAPACITY
A MAX 9.0 m (30') 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m 11100* 11100* 14300* 13900 16300* 16300*
(20') (24400) (24400) (31400) (30600) (35800) (35800)
3.0 m 12100* 9500 15550* 12800 18950* 17650 23950* 23950*
(10') (26600) (20900) (34200) (28100) (41700) (38800) (52700) (52700)
0m 12850 9650 15750* 11850 19800* 15950 25750* 22850 29400* 29400*
(0') (28300) (21200) (34600) (26100) (43500) (35000) (56600) (50300) (64700) (64700)
3.0 m 12100* 12100* 16450* 15750 21300* 21300* 27100* 27100* 33250* 33250*
(10') (26600) (26600) (36200) (34600) (46800) (46800) (59600) (59600) (73100) (73100)
6.0 m
(20')
A MAX 9.0 m (30') 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m 12450* 11200 16350* 13900 18550* 18550*
(20') (27400) (24600) (36000) (30600) (40800) (40800)
3.0 m 12600 9500 16750 12800 21600* 17650 27200* 25000
(10') (27700) (20900) (36800) (28100) (47500) (38800) (59800) (55000)
0m 12850 9650 15750 11850 21200 15950 29350* 22850 32500* 32500*
(0') (28300) (21200) (34600) (26100) (46600) (35100) (64500) (50300) (71500) (71500)
3.0 m 14100* 12250 19000* 15750 24500* 22650 31150* 31150* 38350* 38350*
(10') (31000) (26900) (41800) (34600) (53900) (49800) (68500) (68500 (84400) (84400)
6.0 m
(20')
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.6 m3 (4.71 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (30') 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m 9750* 8400 12800* 12800* 15000* 15000*
(20') (21400) (18500) (28100) (28100) (33000) (33000)
3.0 m 9700 14500* 12750 17850* 17350 23350* 23350*
(10') (21300) (31900) (28000) (39300) (38200) (51400) (51400)
0m 9700 7100 15250* 11400 19050* 15250 24650* 21600 16800* 16800*
(0') (21300) (15600) (33500) (25100) (41900) (33500) (54200) (47500) (36900) (36900)
3.0 m 10300* 8350 13800* 10950 17500* 14650 21750* 21100 27300* 27300* 21950* 21950*
(10') (22600) (18400) (30300) (24100) (38500) (32200) (47800) (46400) (60000) (60000) (47200) (47200)
6.0 m 8850* 8850* 10800* 10800* 14050* 14050* 16900* 16900*
(20') (19500) (19500) (23700) (23700) (30900) (30900) (37200) (37200)
3C-86
LIFTING CAPACITY
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.1 m *7850 *7850 *15100 14300 *17400 *17400
(20') (17300) (17300) (33300) (31600) (38400) (38400)
3.0 m *9150 8000 16750 12950 *20950 17500 *27200 24900
(10') (20200) (17600) (37000) (28500) (46200) (38600) (59900) (54900)
0m 10600 7900 15500 11750 *20750 15650 *29150 22100 *17500 *17500
(0') (23300) (17400) (34200) (25900) (45800) (34500) (64300) (48700) (38600) (38600)
3.0 m 12450 9300 15050 11300 20150 15100 *26000 21600 *31200 *31200 *21500 *21500
(10') (27400) (20500) (33200) (24900) (44400) (33300) (57400) (47600) (68800) (68800) (47400) (47400)
6.1 m *12550 *12550 *13300 *13300 *17150 *17150 *20800 *20800
(20') (27700) (27700) (29300) (29300) (37800) (37800) (45900) (45900)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
6.1 m *6150 *6150 *11950 *11950
(20') (13800) (13800) (26300) (26300)
3.0 m *7100 *7100 *16450 13600 *19850 18450 *25400 *25400
(10') (15600) (15600) (36300) (30000) (43800) (40700) (56000) (56000)
0m *9050 7200 15950 12150 20850 15700 *29200 *29200 *18100 *18100
(0') (19900) (15900) (35200) (26800) (45900) (34700) (64300) (64300) (39900) (39900)
3.0 m 10950 8200 15200 11450 20300 15250 *27800 21750 *26100 *26100
(10') (24100) (18000) (33500) (25200) (44800) (33600) (61300) (47900) (57500) (57500)
6.1 m *12950 11800 *16750 15450 *21150 *21150 *26650 *26650
(20') (28600) (26000) (37000) (34100) (46600) (46600) (58700) (58700)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
6.1 m *4450 *4450
(20') (9800) (9800)
3.0 m *5050 *5050 *14900 13650 *17800 *17800 *22400 *22400 *31000 *31000
(10') (11100) (11100) (32800) (30100) (39200) (39200) (49400) (49400) (68300) (68300)
0m *6200 5750 15750 11950 *21150 16100 *27650 22950 *21300 *21300
(0') (13700) (12600) (34800) (34800) (46600) (35500) (61000) (50600) (47000) (47000)
3.0 m *8600 6350 14700 10900 19750 14650 *27950 21000 *24900 *24900
(10') (19000) (14000) (32400) (24100) (43500) (32300) (61600) (46300) (54900) (54900)
6.1 m *11200 8600 *14500 10800 *18350 14500 *23350 20950 *30350 *30350
(20') (24600) (19000) (32000) (23800) (40500) (32000) (51400) (46200) (66900) (66900)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2945 mm (9'8")
6.1 m *12200 11550 *16050 13250 *18150 *18150 *27150 24750
(20') (26900) (25500) (35400) (29200) (40000) (40000) (59800) (54500)
3.0 m 12800 9600 16650 12800 *21150 17000 *27150 24750
(10') (28200) (21200) (36700) (28200) (46600) (37500) (50800) (54500)
0m 13050 9700 16100 12250 20500 15400 *28950 22100 *37950 *36150
(0') (28700) (21400) (35500) (27000) (45300) (34000) (63800) (48800) (83700) (79600)
3.0 m *14900 12550 15150 13500 *18500 15200 *24100 21900 *30800 *30800 *38300 *38300
(10') (32900) (27700) (33400) (25000) (40700) (33500) (53100) (48300) (67900) (67900) (84500) (84500)
6.1 m
(20')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-87
LIFTING CAPACITY
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.1 m *7850 *7850 *15100 14750 *17400 *17400
(20') (17300) (17300) (33300) (32600) (38400) (38400)
3.0 m *9150 8350 *17150 13400 *20950 18100 *27200 25700
(10') (20200) (18400) (37800) (29500) (46200) (39900) (59900) (56700)
0m *11950 8250 *18200 12200 *22600 16250 *29150 22900 *17500 *17500
(0') (26300) (18200) (40100) (26900) (49800) (35800) (64300) (50500) (38600) (38600)
3.0 m *13700 9700 *16600 11750 *20750 15650 *26000 22400 *31200 *31200 *21500 *21500
(10') (30300) (21400) (36600) (25900) (45700) (34500) (57400) (49400) (68800) (68800) (47400) (47400)
6.1 m *12550 *12250 *17150 *17150 *20800 *20800
(20') (27700) (27700) (37800) (37800) (45900) (45900)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
6.1 m *6150 *6150 *10150 *10150 *11950 *11950
(20') (13600) (13600) (22400) (22400) (26300) (26300)
3.0 m *7100 *7100 *14200 10700 *16450 14050 *19850 19000 *25400 *25400
(10') (15600) (15600) (31300) (23600) (36300) (31000) (43800) (41900) (56000) (56000)
0m *9050 7500 *15100 9800 *18150 12600 *22000 16300 *29200 23700 *18100 *18100
(0') (19900) (16600) (33300) (21600) (40000) (27800) (48500) (35900) (64300) (52200) (39900) (39900)
3.0 m *13000 8550 *14250 9300 *17600 11900 *21850 15800 *27800 22500 *26100 *26100
(10') (28700) (18800) (31400) (2050) (38800) (26200) (48200) (34900) (61300) (49700) (57500) (57500)
6.1 m *12950 12250 *16750 16050 *21150 *21150 *26650 *26650
(20') (28800) (27100) (37000) (35400) (46600) (46600) (58700) (58700)
A MAX 12.2 m (40') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
6.1 m *4450 *4450 *7250 *7250
(20') (9800) (9800) (16000) (16000)
3.0 m *5050 *5050 *9900 8100 *14900 14100 *17800 *17800 *22400 *22400 *31000 *31000
(10') (11100) (11100) (21800) (17900) (32800) (31100) (39200) (39200) (49400) (49400) (68300) (68300)
0m *6200 6000 11800 7400 *17050 12400 *21150 16700 *27650 23750 *21300 *21300
(0') (13700) (13300) (26000) (16300) (37600) (27400) (46600) (36800) (61000) (52300) (47000) (47000)
3.0 m *8600 6650 *11050 6950 *17400 11400 *21700 15250 *27950 21800 *24900 *24900
(10') (19000) (14700) (24400) (15400) (38300) (25100) (47800) (33600) (61600) (48100) (54900) (54900)
6.1 m *11200 9000 *14500 11250 *18350 15100 *23350 21750 *30350 *30350
(20') (24600) (19800) (31900) (24800) (40500) (33200) (51400) (48000) (66900) (66900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-88
LIFTING CAPACITY
PC800-6
Conditions: Boom: 8040 mm (26'11"), Bucket (SAE): 3.4 m3 (4.45 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *10550 9050 *11950 *11950 *14000 *14000 *17500 *17500
(19') (23200) (20000) (26400) (26400) (30900) (30900) (38600) (38600)
3.0 m 10100 7650 *14150 12050 *17700 16500 *24000 23400
(9') (22300) (16800) (31200) (26600) (39100) (36300) (52900) (51600)
0m 10250 7700 14450 11000 19600 14850 *25900 21300
(0') (22600) (16900) (31900) (24200) (43200) (32800) (57100) (47000)
3.0 m 12700 9600 14250 10800 *18400 14650 *23550 21400 *30250 *30250 *28050 *28050
(9') (28000) (21100) (31500) (23800) (40600) (32300) (51900) (47200) (66700) (66700) (61900) (61900)
6.0 m *12850 *12850 *15550 *15550
(19') (28400) (28400) (34300) (34300)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m 11750 9050 *13850 13450 *16100 *16100 *19900 *19900
(19') (25900) (20000) (30500) (29700) (35500) (35500) (43900) (43900)
3.0 m 10100 7650 15600 12050 *20350 16500 *27400 23400
(9') (22300) (16800) (34400) (26600) (44900) (36300) (60500) (51600)
0m 10250 7700 14450 11000 19600 14850 28500 21300
(0') (22600) (16900) (31900) (24200) (43200) (32800) (62900) (47000)
3.0 m 12700 9600 14250 10800 19350 14650 *27050 21400 *34700 *34700 *31100 *31100
(9') (28000) (21100) (31500) (23800) (42700) (32300) (59700) (47200) (76500) (76500) (68600) (68600)
6.0 m *15150 *15150 *18250 *18250
(19') (33400) (33400) (40200) (40200)
PC800SE-6
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.3 m3 (5.62 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2945 mm (9'8")
6.0 m *13250 11950 *13450 12800 *15250 *15250 *18500 *18500
(19') (29200) (26400) (29600) (28200) (33700) (33700) (40800) (40800)
3.0 m 13000 9950 *15200 11950 *18750 16700 *25000 24300
(9') (28600) (21900) (33500) (26300) (41300) (36800) (55100) (53500)
0m 13550 10300 14750 11250 20200 15450 *26850 22450 *27200 *27200
(0') (29800) (22700) (32500) (24800) (44600) (34100) (59200) (49500) (59900) (59900)
3.0 m *15650 14250 *17200 15550 *22850 22750 *29600 *29600 *37150 *37150
(9') (34500) (31400) (37900) (34300) (50300) (50200) (65300) (65300) (81900) (81900)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2945 mm (9'8")
6.0 m *15300 11950 *15550 12800 *17500 *17500 *21050 *21050
(19') (33800) (26400) (34200) (28200) (38600) (38600) (46400) (46400)
3.0 m 13000 9950 15450 11950 *21450 16700 *28400 24300
(9') (28600) (21900) (34100) (26300) (47300) (36800) (62700) (53500)
0m 13550 10300 14750 11250 20200 15450 29750 22450 *30200 *30200
(0') (29800) (22700) (32500) (24800) (44600) (34100) (65600) (49500) (66600) (66600)
3.0 m *18150 14250 *19850 15550 *26200 22750 *33850 *33850 *42600 *42600
(9') (40000) (31400) (43800) (34300) (57800) (50200) (74700) (74700) (93900) (93900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3C-89
LIFTING CAPACITY
PC1250-7
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 5.0 m3 (6.54 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *15200 *15200 *15500 *15500
(30') (33500) (33500) (34200) (34200)
6.1 m *15850 12900 *17300 17100 *19950 *19950 *24400 *24400
(20') (34900) (28500) (38100) (37700) (44000) (44000) (53800) (53800)
3.0 m 15350 11600 16050 12200 *19800 15750 *23900 20500 *30550 27150
(10') (33800) (25600) (35400) (26900) (43700) (34800) (52700) (45200) (67400) (59800)
0.0 m 15950 12050 19600 14900 23750 17850 *32650 25600
(0') (35200) (26500) (43200) (32800) (52400) (39300) (72000) (56400)
3.0 m *19600 14900 *19650 14950 *24750 19150 *30750 25800 *38350 37750 *39250 *39250
(10') (43200) (32900) (43300) (33000) (54600) (42200) (67800) (56800) (84500) (83200) (86600) (86600)
6.1 m *20150 *20150 *21900 *21900 *28150 *28150
(20') (44500) (44500) (48200) (48200) (62100) (62100)
3C-90
LIFTING CAPACITY
PC1250LC-7
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 5.2 m3 (6.80 cu.yd), Shoes: 1000 mm (39")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *15200 *15200 *15500 *15500
(30') (33500) (33500) (34200) (34200)
6.1 m *15850 13850 *17300 *17300 *19950 *19950 *24400 *24400
(20') (34900) (30500) (38100) (38100) (44000) (44000) (53800) (53800)
3.0 m *16750 12500 *17150 13150 *19800 16850 *23900 21800 *30550 28850
(10') (36900) (27600) (37800) (29000) (43700) (37200) (52700) (48100) (67400) (63600)
0.0 m *18050 12950 *21250 15950 *24700 19150 *32650 27300
(0') (39800) (28600) (46900) (35200) (54400) (42200) (72000) (60100)
3.0 m *19600 16000 *19650 16050 *24750 20450 *30750 27450 *38350 *38350 *39250 *39250
(10') (43200) (35300) (43300) (35400) (54600) (45100) (67800) (60600) (84500) (84500) (86600) (86600)
6.1 m *20150 *20150 *21900 *21900 *28150 *28150
(20') (44500) (44500) (48200) (48200) (62100) (62100)
3C-91
LIFTING CAPACITY
PC1800-6
Conditions: Boom: 8700 mm (28'7"), Bucket (SAE): 12.0 m3 (15.7 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3900 mm (12'10")
6.1 m 19700* 19700* 26950* 26950* 31150* 31150*
(20') (43400)* (43400)* (59400)* (59400)* (69600)* (69600)*
3.0 m 23050* 19800 30350* 30350* 36950* 36950* 44100* 44100* 63950* 63950*
(10') (50800)* (43700) (66900) (66900)* (81500)* (81500)* (97300)* (97300)* (142100)* (142100)*
0.0 m 24050* 20450 31650* 28300 39150* 37050 49800* 49800* 65500* 65500* 35500* 35500*
(0') (53100)* (45100) (69800)* (62400)* (86400)* (81600) (110700)* (110700)* (145600)* (145600)* (78300)* (78300)*
3.0 m 24900* 24900* 28050* 27650 35700* 35700* 45050* 45050* 57250* 57250* 67850* 67850* 50450* 50450*
(10') (54900)* (54900)* (61800)* (60900)* (78700)* (78700)* (99300)* (99300)* (127200)* (127200)* (150800)* (150800)* (112100)* (112100)*
6.1 m 23050* 23050* 29000* 29000* 37050* 37050* 45300* 45300*
(20') (50800)* (50800)* (63900)* (63900)* (81700)* (81700)* (99900)* (99900)*
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 10.0 m3 (13.1 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4100 mm (13'5")
9.1 m *20000 *20000 25100* 25100*
(30') (44100)* (44100)* (55300)* (55300)*
6.1 m 21450* 21050* 27200* 26900 30650* 30650* 35550* 35550*
(20') (47300)* (46400)* (60000)* (59300) (67500)* (67500)* (78400)* (78400)*
3.0 m 24850* 19250 29850* 24950 34900* 31900 42100* 41650 53250* 53250*
(10') (54800)* (42500) (65800)* (55000) (76900)* (70700)* (92800)* (91800) (117420)* (117420)*
0.0 m 27000 19850 30900* 23350 37050* 29550 43350* 36150 56950* 51550 64150* 54150*
(0') (59500) (43700) (68200)* (51500) (81600)* (65200)* (95600)* (79700) (125570)* (113670) (141450)* (141450)*
3.0 m 28250* 23650 34650* 28800 41000* 35250 53100* 50600 66950* 66950* 64000* 64000*
(10') (52300)* (52100) (76400)* (63500) (90400)* (77800) (117080)* (111570) (147620)* (147620)* (141120)* (141120)*
6.1 m 27850* 27850* 30400* 30400* 36250* 36250* 48800* 48800* 60150* 60150*
(20') (61400)* (61400)* (67000)* (67000)* (79900)* (79900)* (107600)* (107600)* (132630)* (132630)*
3C-92
LIFTING CAPACITY
PC1800-6
Conditions: Boom: 11400 mm (37'5"), Bucket (SAE): 5.6 m3 (7.3 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 15.2 m (50') 12.2 m (40') 9.1 m (30') 6.1 m (20') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5000 mm (16'5")
12.2 m 13150* 13150*
(40') (29000)* (29000)*
9.1 m 13000* 13000* 13350* 13350*
(30') (28600)* (28600)* (29400)* (29400)*
6.1 m 13300* 12250 14600* 14600* 18550* 18550* 26550* 26500*
(20') (29300)* (27000) (32100)* (32100)* (40900)* (40900)* (58500)* (58500)*
3.0 m 13900* 11150 16050* 15000 21500* 21500* 32350* 32350*
(10') (30600)* (24600) (35400)* (33100)* (47400)* (47400)* (71300)* (71300)*
0.0 m 14750* 11150 17100* 13800 23600* 21150 35500* 33850
(0') (32500)* (24600) (37700)* (30400)* (52000)* (46600)* (78200)* (74700)
3.0 m 15750* 12450 16900* 13300 24100* 20000 35600* 32600 33850* 33850*
(10') (34800)* (27500) (37300)* (29300) (53100)* (44100) (78500)* (71900) (74700)* (74700)*
6.1 m 16750* 16000 22000* 20200 32500* 32500* 49350* 49350* 38500* 38500*
(20') (36900)* (35200) (48500)* (44500) (71600)* (71600)* (108800)* (108800)* (84800)* (84800)*
9.1 m 16700* 16700* 23950* 23950* 36000* 36000*
(30') (36800)* (36800)* (52800)* (52800)* (79400)* (79400)*
3C-93
MEMO
SECTION 3D
BACKHOE ATTACHMENTS
CONTENTS
Buckets & rippers for backhoe
Ripper bucket ....................................................... 3D-2
Trapezoidal bucket .............................................. 3D-2
Slope finishing bucket ........................................ 3D-2
Ditch cleaning bucket ......................................... 3D-2
Single-shank rippers ........................................... 3D-2
Three-shank rippers ............................................ 3D-3
Clamshell bucket ................................................. 3D-3
Coal bucket and chip bucket .............................. 3D-3
Chip yard bucket ................................................. 3D-3
3D-1
Buckets & Rippers for BACKHOE
backhoe ATTACHMENTS
Ripper Bucket
Suitable for digging rock bed or hard clayey soil
when normal buckets cannot penetrate deep
enough. Loading is also possible.
Trapezoidal Bucket
Performs digging and sloping simultaneously on a
drainage or irrigation canal. Using this bucket will
leave the digging profile shaped as a cross-section.
Single-shank Ripper
This ripper is used for site preparation prior to
digging work, when it becomes necessary to remove
rocks, pavement for other obstacles. Also effective
for pulling out tree stumps.
3D-2
Buckets & Rippers for BACKHOE
backhoe ATTACHMENTS
Three-shank Ripper
This ripper is an efficient tool for digging up rocks on
a slope, digging, crushing and ripping of concrete
surfaces, and pulling out tree stumps.
Clamshell Bucket
Improved work efficiency with the clamshell
bucket pushing method.
Handy 360-degree manual rotation
Superb earth digging and discharge performance
3D-3
Attachments for general BACKHOE
construction ATTACHMENTS
3D-4
Attachments for general BACKHOE
construction ATTACHMENTS
2-piece boom
The 2-piece boom can be installed singly for
wider working range.
Rotary arm
The excavator, of which can be rotated 360
degrees, can be widely applied to miscellaneous
works.
WORKING RANGE
CORNER SHOVEL SPECS (EQUIPPED WITH 2-PIECE BOOMS & ROTARY ARM)
MODEL PC60-7B PC120 PC200 PC78US
OPERATING WEIGHT (kg) 8400 12900 19800 8820
FLYWHEEL HORSEPOWER (kW(PS)/rpm) 40.5(55)/2100 64(87)/2200 99.3(135)/2000 40.5(55)/2100
STANDARD BUCKET CAPACITY (M3) 0.28 0.35 0.6 0.28
ROTARY ARM SWING SPEED (rpm) 8.0 8.0 7.0 10.0
WORKING RANGE
A MAX.DIGGING HEIGHT (mm) 8315 8475 9810 9025
B MAX.DUMPING HEIGHT (mm) 6185 6095 6965 6945
C MAX.DIGGING DEPTH (mm) 4655 5245 6395 4445
D MAX.DIGGING REACH (mm) 7675 8180 10000 7945
E MIN.SWING RADIUS (mm) 2515 2780 3530 2500
F TAIL SWING RADIUS (mm) 1850 2130 2750 1430
DIMENSION
LENGTH x HEIGHT x WIDTH (mm) 5790x2645x2280 7460x2780x2490 9260x2905x2800 6445x2770x2365
PC60-7B & PC78US : WHEN BLADE IS INSTALLED.
BUCKET CAPACITY : WHEN CONFORMED TO FORMER JIS, STD BUCKET CAPACITY CHANGES AS INDICATED IN [ ].
3D-5
Attachments for general BACKHOE
construction ATTACHMENTS
Offset Boom
Unique parallelogram type offset boom for
perfectly vertical excavation of side ditches.
Bucket offset parallels the direction the machine
is moving.
Precise excavation close to any structure is no
longer a problem.
A single touch precisely offsets the bucket.
NOTE: Single linkage type by other manufacturer is
also available.
Spike Hammer
This hammer is suitable for chipping concrete
structures such as tunnels, slopes of dams,
breakwaters, etc. when they are repaired and
constructed. It can chip the concrete surfaces
powerfully.
3D-6
Attachments for general BACKHOE
construction ATTACHMENTS
Road Ripper
As the ripper is light, pitching can be restrained
when stripping roadbed.
To improve penetration into the roadbed, the road
ripper tip is thinner than conventional ones
To facilitate stripping work, the tip bottom is linear
in shape.
To increase digging force, the distance between
the arm top pin and the tooth tip is short.
Crushing force
62ton~105ton (PC200 class)
3D-7
Attachments for general BACKHOE
construction ATTACHMENTS
Hydraulic Breaker
Boasts the most powerful impact energy in this class of breakers, with little recoil.
Advanced structure with reduced number of parts saves maintenance cost.
The BPM(Blows per minute) can be varied with an optionally available device (JKHB 2000).
Large Power
Long stroke : Large impact energy, with little recoil, is attained by an increased piston stroke which allows
the piston speed to increase through the relatively long acceleration path.
Combined hydraulic-and-nitrogen gas pressure system : Makes the best use of the combination of the
energy from the nitrogen gas enclosed in the back head and the energy of the hydraulic oil delivered by the
hydraulic pump.
(All Models except for JKHB 51)
Rigid Bracket
The breaker bracket, made of specially wear-resistant material holds the front head and rear head rigidly.
3D-8
Attachments for BACKHOE
logging ATTACHMENTS
3D-9
Attachments for BACKHOE
industry ATTACHMENTS
Lifting Magnet
With its outstanding lifting capacity, the lifting
magnet can attract an increased volume of
scraps.
The AC generator built into the counterweight
keeps noise down and gives a neat appearance.
The belt-drive system in from the main engine to
the AC generator reduces fuel consumption.
PC200LC
Wide shoe : option
3D-10
Attachments for BACKHOE
industry ATTACHMENTS
Optional Equipment
GRAPPLES FIXED HIGH-MOUNT CAB WIDER TRACK GAUGE
STD cab
SCRAP
GRAPPLE
Cab raiser
Ladder
ORANGE
GRAPPLE WIDER TRACK GAUGE
3D-11
Attachments for BACKHOE
industry ATTACHMENTS
Scrap Grapple
To assure safe handling of massive or irregularly
shaped scrap, each of the 4 claws opens and closes
by independent hydraulic cylinders. The grapple
rotates freely to make grappling readjustments safe
and easy.
Orange Grapple
The claws are 4 vane-shaped blades operated
independently by hydraulic cylinders. The freely
turn-able grapple surrounds the scrap material ;
grasps accurately, and keeps small-item spillage to
a minimum.
Magnet Fork
An excavator-based machine with a lifting magnet
and fork device exhibits the best operating
performance in scrap handlings by itself through the
combination of both the MAGNET absorbing and
FORK grapple forces, thus enabling great
improvement of working efficiency, because
materials to be handled can be freely selected.
SPECIFICATIONS
MODEL PC200LC PC220LC PC300LC
OPERATING WEIGHT (kg) 23500 26400 34900
FLYWHEEL HORSEPOWER (kW(PS)/rpm) 99.4(135)/2000 118(160)/2100 173(235)/2050
MAGNET OUTER DIAMETER (mm) 1120 1320 1520
60%ED
WEIGHT (kg) 1280 2050 2750
GENERATOR OUTPUT (kW) 10 15 20
ABSORBING CAPABILITY
1st GRADE SCRAP (kg) 450~600 700~900 1050~1300
2nd GRADE SCRAP (kg) 150~250 250~350 350~500
3D-12
SECTION 3E
HYDRAULIC
LOADING SHOVELS
CONTENTS
Features .................................................................... 3E-2
Specifications ........................................................... 3E-3
Dimensions ............................................................... 3E-5
Working ranges, Digging Force .............................. 3E-6
Component dimensions and weight ...................... 3E-7
Ground pressure .................................................... 3E-17
Loading shovel buckets ........................................ 3E-18
Model selection ...................................................... 3E-19
Production .............................................................. 3E-20
3E-1
Features HYDRAULIC
LOADING SHOVELS
Outstanding work performance increases the productivity
Mode selection system for higher work efficiency
An efficient hydraulic system for increased productivity.
Wide working range and large undercarriage assure stable operation for max. working performances.
Swing holding brake facilitates work on slopes
Comfortable cab, easy operation
A deluxe cab provides a wider working visibility.
Low noise at operator's ears.
The wrist control levers are arranged for comfortable, easy operation.
Smooth swing control.
Dependable components and easy maintenance to increase the machine availability
Dependable hydraulic system and units.
Tough undercarriage and work equipment.
An advanced monitoring system helps prevent minor problems becoming major ones.
Breakthroughs in fuel economy
A mode selection system reduces fuel consumption.
An OLSS or OLSS hydraulic system provides great energy saving.
Fuel efficient Komatsu engine.
An auto-deceleration system for higher energy saving
3E-2
Specifications HYDRAULIC
LOADING SHOVELS
3E-3
Specifications HYDRAULIC
LOADING SHOVELS
3E-4
Dimensions HYDRAULIC
LOADING SHOVELS
L E
D
M
K F
C
G
I
A
H
B J
FVBH0104
A B C D E F G H I J K L M
mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
PC400-6
4020 5025 1320 3500 2995 3265 555 2740 600 3340 2715 8350 4400
PC400-6 (13'2") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (8'11") (27'5") (14'5")
EXCEL
700 3440
PC400LC-6 (28") (11'3")
4350 5355 1320 3500 2995 3265 555 2740 2715 8350 4400
PC400LC-6 (14'3") (17'7") (4'4") (11'6") (9'10") (10'9") (1'10") (9') 600 3340 (8'11") (27'5") (14'5")
EXCEL (24") (11')
4250 5370 1365 3675 3195 3310 780 3300 600 3900 3065 8815 5540
PC600LC-6 (13'11") (17'7") (4'6") (12'1") (10'6") (10'10") (2'7") (10'10") (24") (12'10") (10'1") (28'11") (18'2")
3500 4110
4500 5810 1560 4245 3195 3520 840 (11'6") 610 (13'6") 3445 10075 5115
PC750-6 (14'9") (19'1") (5'1") (13'11") (10'6") (11'6") (2'9") (24") (11'4") (33'1") (16'9")
2780** 3390**
(9'1") (11'1")
4995 6425 1790 4810 3470 4120 990 3900 700 4600 3925 10940 6200
PC1250-7
(16'5") (21'1") (5'10") (15'9") (11'5") (13'6") (3'3") (12'10") (28") (15'1") (12'11") (35'11") (20'4")
5780 7445 2080 6140 5055 6510 730 4600 810 5410 4535 13230 8180
PC1800-6
(19') (24'5") (6'10") (20'2") (16'7") (21'4") (2'5") (15'1") (32") (17'9") (14'11") (43'5") (26'10")
** When retracted
N L
E D
F M K
C
G
I
H A
J B
FVBH0108
A B C D E F G H I J K L M N
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
4870 6405 1900 4805 4795 6246 777 4250 600 5050 3900 11000 6700 5750
PC1400-1
(16') (21') (6'3") (15'9") (15'9") (20'6") (2'7") (13'11") (24") (16'7") (12'10") (36'1") (22') (18'10")
6000 7905 2710 5950 5910 7930 908 4800 800 5600 5280 13500 7930 6290
PC3000-1
(19'8") (25'11") (8'11") (19'6") (19'5") (26'0") (3') (15'9") (31'5") (18'4") (17'4") (44'4") (26'6") (20'8")
6245 8375 2942 6090 7067 8260 980 5350 1200 6550 6027 14100 9000 7650
PC4000-6
(20'6") (27'6") (9'8") (20') (23'2") (27'1") (3'3") (17'7") (47") (21'6") (19'9") (46'3") (29'6") (25'1")
6800 9100 3240 7260 7270 8535 970 5800 1350 7150 6342 16370 10000 8000
PC5500-6
(22'4") (29'10") (10'8") (23'10") (23'10") (28'0") (3'2") (19') (53") (23'6") (20'10") (53'9") (32'10") (26'3")
6800 9100 3240 7165 6600 8745 970 5800 1350 7150 6342 18200 10500 9400
PC8000-6
(22'4") (29'10") (10'8") (23'6") (21'8") (28'8") (3'2") (19') (53") (23'6") (20'10") (59'9") (34'5") (30'10")
3E-5
Working Ranges HYDRAULIC
Digging Force LOADING SHOVELS
G
Boom le
ngth
A
gth
B
len
m
Ar
F
C
E
D FVBH0105
A
B
C F
E
D
FVBH0109
3E-6
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC600LC-6
Four-part structure
(1) Work equipment assy (L/S) 14.3t (31,530 lb)
Width 2090 (6'10")
2830(9'3")
8580 (28'2")
875(2'10")
3310 (10'10")
5690 (18'8")
(4)
1320
(4'4") Other
3E-7
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC750-6
Four-part structure
(1) Work equipment assy (L/S) 18.9t (41,670 lb)
2885 (9'4")
9500 (31'2")
5970 (19'7")
2750 (9')
Three-part strucure
(1)
(3) Undercarriage 21.8t (48,060 lb)
Work equipment assy
1255 (10'6")
3640 (11'11")
5810 (19'1")
03
15
(4)
50kg
16 51
00 0
70 90 Other
51 33
10 0
18
3E-8
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1250-7
Posture for Transportation 4 units for transportation (PC1250-7 STD spec.)
(lenght X height X width) (1/2)
(1) Work equipment assembly 27.5t (30.3 U.S. ton) (3) Undercarriage 30.0t (33.1 U.S. ton)
1585(5'2")
7.1t 5650x1500x2000
(7.8USt) (18'6")x(4'11")x(6'7") FVBH0190
Arm
Weight
5.1t 4100x1300x1200 PC1250:30.0t (33.1USt)
(5.6USt) (13'5")x(4'3")x(3'11") FVBH0191 15.0t x2(16.5 x2USt) FVBH0195
Bucket Boom cylinder
2.6t (2.87USt)
1.3t x2 (1.43USt x2) (4) Other 27.7t (30.5 U.S. ton)
9.9t (10.9USt)
3010x2710x2900 3520(11'7")
(9'11")x(8'11")x(9'6") FVBH0192 2850(9'4")
1260(4'2")
Arm cylinder
1.24t (1.43USt)
0.62t x2 (0.67USt x2)
600(2')
2980(9'9")
Width:3540 (11'7")
Weight:9.3t (10.3USt)
400
Bucket cylinder (1'4")
1.56t (1.72USt) 2850(9'4")
0.78t x2 (0.86USt x2)
3300(10'10")
FVBH0193
845 620
(2'9") (2')
(2) Upper structure 23.9t (26.3 U.S. ton) 3155(10'4")
1810
6420(21'1") (5'11")
1760(5'9")
100(3.9")
2510(8'3")
880(2'11")
3470(11'5")
1830
(6')
Width:3490 (11'9")
Weight:23.9t (26.3USt) FVBH0178 18.0t(19.8USt) FVBH0180
3E-9
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1800-6
Dimension Length Width Height Weight
Unit name mm (ft.in) mm (ft.in) mm (ft.in) kg (lb)
1 Boom
6400 1740 2000 11800
(21'0") (5'9") (6'7") (26,010)
FVBH0205
2 Arm
4900 1450 1700 9500
(16'1") (4'9") (5'7") (20,940)
FVBH0206
3 Bucket
3350 3220 3250 14400
(11'0") (10'7") (10'8") (31,750)
4 Cylinders
2330 2
Boom cylinders 4180
(13'9") (5,140 2)
6 Center frame
3330 3770 2100 18000
(10'11") (12'4") (6'11") (39,680)
7 Undercarriage
7440 1930 1890 25500
(24'5") (6'4") (6'2") (56,220)
8 Undercarriage
7440 1930 1890 25500
(24'5") (6'4") (6'2") (56,220)
9 Operator cab
2100 1600 2080 850
(6'11") (5'3") (6'10") (1,874)
10 Counterweight
4910 710 2265 21300
(16'1") (2'4") (7'5") (46,960)
11 Other
7000
(15,430)
3E-10
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1400-1
Component Dimensions and Weights PC1400-1
shoe width mm (in) 600 (24")
length mm (ft.in) 6450 (21'2")
Undercarriage width mm (ft.in) 5150 (16'11")
height mm (ft.in) 1850 (6'1")
weight t (U.S.ton) 43 (47.9)
shoe width, option mm (in) 800 (31.5")
length mm (ft.in) 6450 (21'2")
Undercarriage, Option width mm (ft.in) 5150 (16'11")
height mm (ft.in) 1850 (6'1")
weight t (U.S.ton) 46 (50.7)
counterweight, pieces 1
length mm (ft.in) 4000 (13'1")
Counterweight width mm (ft.in) 2000 (6'7")
height mm (ft.in) 900 (2'11")
weight t (U.S.ton) 24 (26.5)
length mm (ft.in) 6460 (21'2")
Upper structure width mm (ft.in) 4800 (15'9")
height mm (ft.in) 3200 (10'6")
weight t (U.S.ton) 31 (34.2)
length mm (ft.in) 2800 (9'2")
case with cab width mm (ft.in) 2800 (9'2")
height mm (ft.in) 3200 (10'6")
weight t (U.S.ton) 1.25 (1.38)
length mm (ft.in) 2910 (9'7")
Cab Guard width mm (ft.in) 1730 (5'8")
height mm (ft.in) 2340 (7'8")
weight t (U.S.ton) 1.1 (1.21)
with boom cylinder yes, two
with arm cylinder yes, two
length mm (ft.in) 5350 (17'7")
Face Shovel Boom width mm (ft.in) 1680 (5'6")
height mm (ft.in) 2520 (8'3")
weight t (U.S.ton) 15 (16.5)
with shovel cylinder yes, two
length mm (ft.in) 4100 (13'5")
Face Shovel Arm width mm (ft.in) 1700 (57")
height mm (ft.in) 1850 (6'1")
weight t (U.S.ton) 7.5 (8.3)
capacity SAE m (cu.yd) 10.4 (13.6)
length mm (ft.in) 3830 (12'7")
Face Shovel Compl. width mm (ft.in) 3100 (10'2")
height mm (ft.in) 2800 (9'2")
weight with WP-M t (U.S.ton) 13.5 (14.9)
no. of container 1
Additional Case length mm (ft.in) 4100 (13'5")
width mm (ft.in) 1500 (4'11")
Face Shovel
height mm (ft.in) 1600 (5'3")
weight t (U.S.ton) 2 (2.2)
3E-11
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC3000-1
Component Dimensions and Weights PC3000-1
pieces 2
shoe width mm (in) 800 (31.5")
length mm (ft.in) 7860 (25'9")
Undercarriage
width mm (ft.in) 1640 (5'5")
height mm (ft.in) 2160 (7'1")
weight t (U.S.ton) 31.9 (35.2)
pieces 2
shoe width, option mm (in) 1000 (3'3")
length mm (ft.in) 7860 (25'9")
Undercarriage, Option
width mm (ft.in) 1840 (6'0")
height mm (ft.in) 2160 (7'1")
weight t (U.S.ton) 34 (37.5)
length mm (ft.in) 3520 (11'7")
width mm (ft.in) 3940 (12'11")
Carbody Centre height mm (ft.in) 2180 (7'2")
weight t (U.S.ton) 16.6 (18.3)
counterweight, pieces 1
length mm (ft.in) 5050 (16'7")
Counterweight width mm (ft.in) 800 (2'7")
height mm (ft.in) 2860 (9'5")
weight t (U.S.ton) 27.7 (30.5)
length mm (ft.in) 7945 (26'1")
width mm (ft.in) 5400 (17'9")
Upper structure
height mm (ft.in) 3700 (12'2")
weight t (U.S.ton) 61.5 (67.8)
length mm (ft.in) 2250 (7'5")
width mm (ft.in) 1650 (5'5")
Fuel-tank height mm (ft.in) 2800 (9'2")
weight t (U.S.ton) 2.25 (2.48)
length mm (ft.in) 2140 (7'0")
width mm (ft.in) 1950 (6'5")
Cab Base
height mm (ft.in) 2650 (8'8")
weight t (U.S.ton) 3.1(3.4)
length mm (ft.in) 2800 (9'2")
width mm (ft.in) 2100 (6'11")
Case with cab height mm (ft.in) 3200 (10'6")
weight t (U.S.ton) 2.25 (2.48)
length mm (ft.in) 2810 (9'3")
width mm (ft.in) 1920 (6'4")
Cab Guard
height mm (ft.in) 2450 (8'0")
weight t (U.S.ton) 1.4 (1.54)
with cylinders 4
length mm (ft.in) 6450 (21'2")
Face Shovel Boom width mm (ft.in) 2100 (6'11")
height mm (ft.in) 2180 (7'2")
weight t (U.S.ton) 26.5 (29.2)
with shovel cylinder no
length mm (ft.in) 4740 (15'7")
Face Shovel Arm width mm (ft.in) 1950 (6'5")
height mm (ft.in) 1700 (5'7")
weight t (U.S.ton) 10.5 (11.6)
capacity SAE m (cu.yd) 14 (18.3)
length mm (ft.in) 3870 (12'8")
Face Shovel Compl. width mm (ft.in) 3500 (11'6")
height mm (ft.in) 3600 (11'10")
weight with WP-M t (U.S.ton) 24.4 (26.9)
no. of container 1
Additional Case length mm (ft.in) 5800 (19'0")
Face Shovel width mm (ft.in) 2400 (7'10")
height mm (ft.in) 1800 (5'11")
weight t (U.S.ton) 3.1 (3.42)
no. of container 1
length mm (ft.in) 4700 (15'5")
Additional Case width mm (ft.in) 1100 (3'7")
Face Shovel
height mm (ft.in) 1200 (3'11")
weight t (U.S.ton) 7 (7.7)
3E-12
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC4000-6
Component Dimensions and Weights PC4000-6
pieces 2
shoe width mm (in) 1200 (47")
Undercarriage length mm (ft.in) 8450 (27'9")
width mm (ft.in) 2700 (10'3")
height mm (ft.in) 2420 (7'11")
weight t (U.S.ton) 52 (57.3)
pieces 2
shoe width, option mm (in) 1500 (59")
Undercarriage, Option length mm (ft.in) 8450 (27'9")
width mm (ft.in) 2850 (9'4")
height mm (ft.in) 2420 (7'11")
weight t (U.S.ton) 54.5 (60.1)
length mm (ft.in) 4420 (14'6")
Carbody Centre width mm (ft.in) 4130 (13'7")
height mm (ft.in) 2350 (7'9")
weight t (U.S.ton) 29 (32)
length mm (ft.in) 8420 (27'8")
Upper structure Main Frame width mm (ft.in) 4440 (14'7")
height mm (ft.in) 3900 (12'10")
weight t (U.S.ton) 57.5 (63.4)
counterweight, pieces 1
length mm (ft.in) 6150 (20'2")
Counterweight width mm (ft.in) 3420 (11'3")
height mm (ft.in) 700 (2'4")
weight t (U.S.ton) 33.8 (34.6)
length mm (ft.in) 6500 (21'4")
Main Machinery House width mm (ft.in) 3000 (9'10")
Without Filters and Railings height mm (ft.in) 3300 (10'10")
weight t (U.S.ton) 30.1 (33.2)
length mm (ft.in) 2400 (7'10")
Fuel-tank width mm (ft.in) 2100 (6'11")
height mm (ft.in) 3230 (10'7")
weight t (U.S.ton) 3.6 (4.0)
length mm (ft.in) 2400 (7'10")
Hydraulic-tank width mm (ft.in) 1200 (3'11")
height mm (ft.in) 3300 (10'10")
weight t (U.S.ton) 3.2 (3.5)
length mm (ft.in) 4400 (14'5")
Case with Oil Cooler width mm (ft.in) 2250 (7'5")
height mm (ft.in) 2700 (8'10")
weight t (U.S.ton) 3.4 (3.7)
length mm (ft.in) 2280 (7'6")
Cab Base width mm (ft.in) 2100 (6'11")
height mm (ft.in) 3000 (9'10")
weight t (U.S.ton) 3.4 (11'2")
length mm (ft.in) 4000 (13'1")
Cab with intermediatze base width mm (ft.in) 3500 (11'6")
height mm (ft.in) 3000 (9'10")
weight t (U.S.ton) 5 (5.5)
with boom cylinder yes two
with stick cylinder yes two
Face Shovel Boom length mm (ft.in) 7700 (25'3")
width mm (ft.in) 2500 (8'2")
height mm (ft.in) 3200 (10'6")
weight t (U.S.ton) 34.6 (38.1)
length mm (ft.in) 5300 (17'5")
Face Shovel Arm width mm (ft.in) 2100 (6'11")
height mm (ft.in) 2000 (6'7")
weight t (U.S.ton) 14.4 (15.9)
capacity SAE m (cu.yd) 21 (27.5)
lenght mm (ft.in) 4100 (13'5")
Face Shovel Clam width mm (ft.in) 3500 (11'6")
height mm (ft.in) 3400 (11'2")
weight with WP-M t (U.S.ton) 15.4 (17.0)
capacity SAE m (cu.yd) 21 (27.5)
lenght mm (ft.in) 4000 (13'1")
Face Shovel Backwall width mm (ft.in) 4000 (13'1")
height mm (ft.in) 1720 (5'8")
weight with WP-M t (U.S.ton) 15.4 (17.0)
length mm (ft.in) 5800 (19'0")
Face Shovel width mm (ft.in) 2390 (7'10")
height mm (ft.in) 1700 (5'7")
weight t (U.S.ton) 4 (4.4)
length mm (ft.in) 4300 (14'1")
Face Shovel width mm (ft.in) 1000 (3'3")
height mm (ft.in) 1050 (3'5")
weight t (U.S.ton) 6 (6.6)
3E-13
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC5500-6
Dimentions Lengthmm Widthmm Heightmm Weightton
Unit Name (ft.in) (ft.in) (ft.in) (U.S.ton)
3E-14
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC8000-6
Component Dimensions and Weights PC8000-6
pieces 2
shoe width mm (in) seperate
Undercarriage length mm (ft.in) 9300 (30'6")
without tracks width mm (ft.in) 1790 (5'10")
height mm (ft.in) 2400 (7'10")
weight t (U.S.ton) 46 (50.7)
pieces 8
shoe width mm (in) 1500(59")
Chain with 12 pads length mm (ft.in) 5980 (19'7")
width mm (ft.in) 1500 (4'11")
height mm (ft.in) 380 (1'3")
weight t (U.S.ton) 92 (101)
length mm (ft.in) 5270 (17'3")
width mm (ft.in) 5030 (16'6")
Carbody Centre height mm (ft.in) 3150 (10'4")
weight t (U.S.ton) 47.5 (52.4)
length mm (ft.in) 11300 (37'1")
width mm (ft.in) 4750 (15'7")
Upperstructure Main Frame
height mm (ft.in) 4000 (13'1")
weight t (U.S.ton) 83 (91.5)
counterweight, pieces 1
length mm (ft.in) 3750 (12'4")
Counterweight left hand side width mm (ft.in) 3550 (11'8")
height mm (ft.in) 750 (2'6")
weight t (U.S.ton) 21.5 (23.7)
counterweight, pieces 1
length mm (ft.in) 3000 (9'10")
Counterweight rigth hand side width mm (ft.in) 3560 (11'8")
height mm (ft.in) 750 (2'6")
weight t (U.S.ton) 19.3 (21.3)
length mm (ft.in) 8330 (27'4")
Main Machinery House width mm (ft.in) 5300 (17'5")
Without Filters and Railings height mm (ft.in) 4100 (13'5")
weight t (U.S.ton) 59 (65)
length mm (ft.in) 3500 (11'6")
Fuel-tank width mm (ft.in) 1500 (4'11")
height mm (ft.in) 3740 (12'3")
weight t (U.S.ton) 5.4 (6.0)
length mm (ft.in) 2700 (8'10")
Hydraulic-tank width mm (ft.in) 1910 (6'3")
height mm (ft.in) 3680 (12'1")
weight t (U.S.ton) 7 (7.7)
length mm (ft.in) 5370 (17'7")
Case with Oil Cooler width mm (ft.in) 2490 (8'2")
height mm (ft.in) 2460 (8'1")
weight t (U.S.ton) 8 (8.8)
length mm (ft.in) 2150 (7'1")
Cab Base width mm (ft.in) 2200 (7'3")
height mm (ft.in) 3400 (11'2")
weight t (U.S.ton) 5 (5.5)
length mm (ft.in) 4970 (16'4")
Slew ring width mm (ft.in) 4660 (15'3")
height mm (ft.in) 1300 (4'3")
weight t (U.S.ton) 14.8 (16.3)
3E-15
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
3E-16
Ground Pressure HYDRAULIC
LOADING SHOVELS
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
3E-17
Loading Shovel HYDRAULIC
Buckets LOADING SHOVELS
The bucket weight is heavier than the tilt-dump bucket. However, its characteristics of vertical dumping
provide the following features
Accurate loading is possible, because it is easy to position the bucket on the dumping point.
Load spillage is less.
Larger dumping clearance permits easier loading on the hauler.
As it is possible to more closely position the bucket over the haulers body, loading shock to the hauler can
be minimized, extending the service life of the hauler.
As a result of the above advantages, the cycle time is shortened.
3E-18
Model Selection HYDRAULIC
LOADING SHOVELS
HYDRAULIC LOADING SHOVEL AND DUMO TRUCK COMBINATION
: SUITABLE : POSSIBLE
HYDRAULIC EXCAVATOR DUMP TRUCK
BUCKET CAPACITY OFF-HIGHWAY DUMP TRUCK
(HEAPED) m3 (cu,yd)
MODEL HD405 HD605 HD985
(SAE) (CECE) HD255 HD325 HD465 HD785 HD1200 HD1500
630E 730E 830E 930E
PC400 L/S 2.6 (3.4) 2.6 (3.4)
PC600LC L/S 4.0 (5.2) 4.0 (5.2)
PC750 L/S 3.8 (5.0) 3.8 (5.0)
4.5 (5.9) 4.5 (5.9)
PC1250 L/S 6.5 (8.5) 6.5 (8.5)
PC1800 L/S 11.0 (14.4)
PC1400 L/S 8.5 (11.1)
9.5 (12.4)
10.4 (13.6)
PC3000 L/S 15.0 (19.6)
PC4000 L/S 21.0 (27.5)
PC5500 L/S 22.0 (28.8)
25.0 (32.7)
28.0 (36.7)
PC8000 L/S 35.0 (46.0) 35.0 (46.0)
3E-19
Production HYDRAULIC
LOADING SHOVELS
Estimated Hourly Production
ESTIMATED
BUCKET SIZE** (m3) OR (cu.yd)
CYCLE TIME
SEC. MIN. 2.5 2.8 3.1 3.4 3.7 4.0 4.3 4.6 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5
15.0 0.25 600 672 744 816 888 960 1032 1104 1200 1320 1440 1560 1680 1800 1920 2040
18.0 0.30 500 560 620 680 740 800 860 920 1000 1100 1200 1300 1400 1500 1600 1700
21.0 0.35 429 480 531 583 634 686 737 789 857 943 1029 1114 1200 1286 1371 1457
24.0 0.40 375 420 465 510 555 600 645 690 750 825 900 975 1050 1125 1200 1275
27.0 0.45 333 373 413 453 493 533 573 613 667 733 800 867 933 1000 1067 1133
30.0 0.50 300 336 372 408 444 480 516 552 600 660 720 780 840 900 960 1020
33.0 0.55 273 305 338 371 404 436 469 502 545 600 655 709 764 818 873 927
36.0 0.60 250 280 310 340 370 400 430 460 500 550 600 650 700 750 800 850
Actual production = (Estimated Hourly production) (Bucket fill factor) (Job efficiency)
Bucket Fill Factor (K) (PC400~PC1800) Job Efficiency(E)
Loading conditions K
Easy loading 1.0
Average loading 0.95
Severe loading 0.90
*4 : KMG Mining Shovels (Loading shovel)
3E-20
SECTION 3F
WHEEL-TYPE
EXCAVATORS
CONTENTS
Features .....................................................................3F-2
Specifications ............................................................3F-3
Dimensions ................................................................3F-6
Working ranges, digging force ................................3F-8
Bucket and arm combinations ...............................3F-10
Lifting capacity ........................................................3F-12
3F-1
Features WHEEL-TYPE
EXCAVATORS
High mobility
A high-power KOMATSU engine gives it a higher travel speed for quick relocation.
Four-wheel drive and double tires (PW75~PW220) both front and rear make it easy to travel over rough or
soft terrain.
High working performance
Large working range and strong digging force.
The PC system makes full use of engine power. (PW75~PW220)
A two-pump merge system increases work equipment speed and reduces cycle time.
Smooth, responsive swing starts and stops.
High lifting capacity and good stability.
High operating versatility
Extra-small swing radius boosts operating versatility.
Excellent stability due to oscillation lock cylinders and double tires.
Enhanced operator comfort
Hydrostatic drive system assures smooth, easy travel speed changes.
Newly designed cab offers greater comfort.
Excellent safety and easy maintenance
Four wheel disc brake with positive braking
One of the features now on the new wheeled excavator is a walkway across the excavator superstructure,
giving easy access to the engine compartment.
(PW200-7, PW220-7)
In harmony with the environment
Low emission engine
The powerful turbocharged and air-to-air aftercooled Komatsu SAA6D102E-2 provides 118 kW/158 HP.
This engine meets Stage II emissions standards with increased power and machine productivity.
Economy mode reduces fuel consumption
Low operating noise
Designed for easy end of life recycling
(PW200-7, PW220-7)
Undercarriage
Designed for high ground clearance
High oscillation angle
Virtually zero axle rocking with outboard wet disc system
Powerful drawbar pull
Automatic 3-speed travel
Class leading 35 km/h maximum travel speed
(PW200-7, PW220-7)
SpaceCabTM
The new PW200/220-7'scabin space have been increased by 14%, offering an exceptionally-roomy
operating environment.
High-pressurised cabin with optional air conditioner
Low-noise design
Low-vibration design with cabin damper mounting
Cab moved forward for better visibility
Ergonomic control levers
Seat specially designed for wheeled machines, with exceptional extra comfort.
(PW200-7, PW220-7)
3F-2
Specifications WHEEL-TYPE
EXCAVATORS
3F-3
Specifications WHEEL-TYPE
EXCAVATORS
3F-4
Specifications WHEEL-TYPE
EXCAVATORS
3F-5
Dimensions WHEEL-TYPE
EXCAVATORS
L
D
J
F
K
C
G G.L
H B
I A FVBH0005
E
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
2060 930 1040 1475 2000 2690 340 1684 2155 5720 1.7
PW75R-2** (6'9'') (3'1'') (3'5'') (4'10'') (6'7'') (8'10'') (1'1'') (5'6'') (7'1'') (18'9'') (5'7'')
PW95R-2** 2200 1000 1100 1510 2120 3020 405 1815 2315 5895 1.6
(7'3'') (3'3'') (3'7'') (4'11'') (6'11'') (9'11'') (1'4'') (5'11'') (7'7'') (19'4'') (5'3'')
3645 6935 2.06
2600 1000 1215 2020 2445 3020 320 1840 2420 (12') 2165 (22'9'') 4.26 (6'9'')
PW100-3
(8'6'') (3'3'') (4') (6'8'') (8') (9'11'') (1'1'') (6') (7'11'') 3750 (7'1'') 6810 (14'') 2.36
PW110R-1** 2400 1100 1175 1577 2120 3090 350 1945 2500 6540 1.85
(7'10'') (3'7'') (3'10'') (5'2'') (6'11'') (10'2'') (1'2'') (6'5'') (8'2'') (21'5'') (6'1'')
3055 7590 2.1
2600 1000 1210 2112 2435 3043 340 1884 2500 (10') 2330 (24'11'') 4.6 (6'11'')
PW130ES-6* (8'6'') (3'3'') (4') (6'11'') (8') (10') (1'1'') (6'2'') (8'2'') (7'8'') (15'1'')
3455 7445 2.5
(11'4'') (24'5'') (8'2'')
3945 5731 2.1
2600 1000 1210 2112 2435 3043 340 1884 2500 (12'11'') 2330 (18'10'') 4.8 (6'11'')
PW130ES-6**
(8'6'') (3'3'') (4') (6'11'') (8') (10') (1'1'') (6'2'') (8'2'') 3940 (7'8'') 5715 (15'9'') 2.5
(12'11'') (18'9'') (8'2'')
3163 7772 2.1
(19'7'') (25'6'') (6'11'')
2600 1000 1275 2292 2435 3069 340 1884 2500 3294 2410 7743 4.6 2.5
PW150ES-6*
(8'6'') (3'3'') (4'2'') (7'6'') (8') (10'1'') (1'1'') (6'2'') (8'2'') (10'10'') (7'11'') (25'5'') (15'1'') (8'2'')
3867 7451 3.0
(12'8'') (24'5'') (9'10'')
3965 5973 2.1
(13') (19'7'') (6'11'')
2600 1000 1275 2292 2435 3069 340 1884 2500 3979 2410 5969 4.8 2.5
PW150ES-6**
(8'6'') (3'3'') (4'2'') (7'6'') (8') (10'1'') (1'1'') (6'2'') (8'2'') (13'1'') (7'11'') (19'7'') (15'9'') (8'2'')
3954 5979 3.0
(13') (19'7'') (9'10'')
3374 8624 1.8
(11'1'') (28'4'') (5'11'')
2600 1000 1275 2417 2462 3134 340 1884 2500 3312 2410 8572 5.2 2.25
PW170ES-6*
(8'6'') (3'3'') (4'2'') (7'11'') (8'1'') (10'3'') (1'1'') (6'2'') (8'2'') (10'10'') (7'11'') (28'1'') (17'1'') (7'5'')
3141 8563 2.6
(10'4'') (28'1'') (8'6'')
3995 5827 1.8
(13'1'') (19'1'') (5'11'')
2600 1000 1275 2417 2462 3134 340 1884 2500 3995 2410 6550 5.2 2.25
PW170ES-6**
(8'6'') (3'3'') (4'2'') (7'11'') (8'1'') (10'3'') (1'1'') (6'2'') (8'2'') (13'1'') (711'') (21'6'') (17'1'') (7'5'')
3960 6960 2.6
(13'10'') (22') (8'6'')
3906 9479 1.8
(12'10") (31'1") (5'11")
3895 9435 2.4
2750 1450 1327 2700 2541 3234 330 1914 2541 (12'9") 2342 (30'11") 5.7 (7'10")
PW200-7*
(9'0") (4'9") (4'4") (8'10") (8'4") (10'7") (1'1") (6'3") (8'4") 3912 (7'8") 9427 (18'8") 2.9
(12'10") (30'11") (9'6")
3985 9467 3.5
(13'1") (31'1") (11'6")
* One piece boom
** Two piece boom
3F-6
Dimensions WHEEL-TYPE
EXCAVATORS
L
D
J
F
K
C
G G.L
H B
I A FVBH0005
E
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
3980 7070 1.8
(13'1") (23'2") (5'11")
3980 7078 2.4
2750 1450 1327 2700 2541 3234 330 1914 2541 (13'1") 2342 (23'3") 5.4 (7'10")
PW200-7**
(9'0") (4'9") (4'4") (8'10") (8'4") (10'7") (1'1") (6'3") (8'4") 3997 (7'8") 7000 (17'9") 2.9
(13'1") (23'0") (9'6")
4505 7218 3.5
(14'9") (23'8") (11'6")
9480 2.41
2800 1420 1310 2680 2610 3130 335 1860 2490 3740 2520 (31'1'') 5.7 (7'11'')
PW210-1 (9'2'') (4'8'') (4'4'') (8'10'') (8'7'') (10'3'') (1'1'') (6'1'') (8'2'') (12'3'') (8'3'') (18'8'') 2.925
9460
(31') (9'7'')
3920 9479 1.8
(12'10") (31'1") (5'11")
3909 9435 2.4
2750 1450 1341 2700 2785 3248 345 2124 2785 (12'10") 2356 (30'11") 5.7 (7'10")
PW220-7*
(9'0") (4'9") (4'5") (8'10") (9'2") (10'8") (1'2") (7'0") (9'2") 3926 (7'9") 9427 (18'8") 2.9
(12'11") (30'11") (9'6")
3999 9467 3.5
(13'1") (31'1") (11'6")
3995 7070 1.8
(13'1") (23'2") (5'11")
3995 7078 2.4
2750 1450 1341 2700 2785 3248 345 2124 2785 (13'1") 2356 (23'3") 5.4 (7'10")
PW220-7**
(9'0") (4'9") (4'5") (8'10") (9'2") (10'8") (1'2") (7'0") (9'2") 4011 (7'9") 7000 (17'9") 2.9
(13'2") (23'0") (9'6")
4519 7218 3.5
(14'10") (23'8") (11'6")
* One piece boom
** Two piece boom
3F-7
Working Ranges WHEEL-TYPE
Digging Force EXCAVATORS
A
B
FVBH0006
3F-8
Working Ranges WHEEL-TYPE
Digging Force EXCAVATORS
A
B
FVBH0006
3F-9
Bucket and Arm WHEEL-TYPE
Combinations EXCAVATORS
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Material weight up to 1.8 t/m3 (3000 lb/cu.yd) Material weight up to 1.5 t/m3 (2500 lb/cu.yd)
Material weight up to 1.2 t/m3 (2000 lb/cu.yd) Not usable.
Bucket capacity (heaped) Width Weight
SAE,PCSA CECE Without Side With Side kg (lb) Arm length
3
m (cu.yd) 3
m (cu.yd) cutters cutters (With side m (ft.in)
mm (in) mm (in) cutters)
PW75R-2** 1.7 (5'7") 2.1 (6'11")
0.086 (0.11) 300 (11.8") *128 (282)
0.128 (0.17) 400 (15.7") *160 (353)
0.171 (0.22) 500 (19.7") *184 (406)
0.2 (0.26) 600 (23.6") *174 (384)
0.232 (0.30) 700 (27.6") *189 (417)
0.265 (0.35) 800 (31.5") *196 (432)
PW95R-2** 1.6 (5'3") 1.85 (6'1")
0.086 (0.11) 300 (11.8") *128 (282)
0.128 (0.17) 400 (15.7") *160 (353)
0.171 (0.22) 500 (19.7") *184 (406)
0.213 (0.28) 600 (23.6") *200 (441)
0.255 (0.33) 700 (27.6") *218 (481)
0.298 (0.39) 800 (31.5") *236 (520)
0.34 (0.44) 900 (35.4) *256 (564)
PW100-3 2.0 (6'7") 2.3 (7'7")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 570 (22.4") 220 (485)
0.28 (0.37) 0.26 (0.34) 600 (23.6") 720 (28.3") 289 (637)
0.36 (0.47) 0.33 (0.43) 700 (27.6") 820 (32.3") 314 (692)
0.38 (0.50) 0.35 (0.46) 825 (32.5") 950 (37.4") 345 (761)
0.44 (0.58) 0.40 (0.52) 825 (32.5") 925 (36.4") 358 (789)
0.56 (0.73) 0.50 (0.65) 1000 (39.4") *388 (855)
PW110R-1**
0.093 (0.12) 300 (11.8") 168 (370)
0.139 (0.18) 400 (15.7") 194 (428)
0.181 (0.24) 500 (19.7") 218 (481)
0.225 (0.29) 600 (23.6") 234 (516)
0.27 (0.35) 700 (27.6") 252 (556)
0.314 (0.41) 800 (31.5") 270 (595)
0.36 (0.47) 900 (35.4") 294 (648)
0.4 (0.52) 1000 (39.4") 320 (705)
PW130ES-6 2.1 (6'11") 2.5 (8'2") Rotating arm
0.20 (0.26) 0.19 (0.25) 400 (15.7") *270 (595)
0.27 (0 35) 0.25 (0.33) 450 (17.7") *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") *605 (1334)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") *675 (1488)
Rotating
PW150ES-6 2.1 (6'11") 2.5 (8'2") 3.0 (9'10")
arm
0.20 (0.26) 0.19 (0.25) 400 (15.7") *270 (595)
0.27 (0 35) 0.25 (0.33) 450 (17.7") *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") *605 (1334)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") *675 (1488)
* Without side cutters
** Two piece boom
3F-10
Bucket and Arm WHEEL-TYPE
Combinations EXCAVATORS
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Material weight up to 1.8 t/m3 (3000 lb/cu.yd) Material weight up to 1.5 t/m3 (2500 lb/cu.yd)
Material weight up to 1.2 t/m3 (2000 lb/cu.yd) Not usable.
Bucket capacity (heaped) Width Weight
SAE,PCSA CECE Without Side With Side kg (lb) Arm length
3
m (cu.yd) 3
m (cu.yd) cutters cutters (With side m (ft.in)
mm (in) mm (in) cutters)
PW170ES-6 1.8 (5'11") 2.2 (7'3") 2.6 (8'6")
0.27 (0.35) 0.25 (0.33) 450 (17.7") *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") *605 (1134)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") *675 (1488)
PW200-7 1.8 (5'11") 2.4 (7'11") 2.9 (9'6") 3.5 (11'6")
0.48 (0.63) 600 (23.6") *480 (1058)
0.55 (0.72) 700 (27.6") *530 (1168)
0.63 (0.82) 800 (31.5") *580 (1279)
0.71 (0.93) 900 (35.4") *610 (1345
0.78 (1.02) 1000 (39.4") *650 (1433)
0.86 (1.12) 1100 (43.3") *700 (1543)
0.96 (1.26) 1200 (47.2") *760 (1675)
1.03 (1.35) 1300 (51.2") *810 (1786)
1.11 (1.45) 1400 (55.1") *870 (1918)
1.19 (1.56) 1500 (59.1") *930 (2050)
1.49 (1.95) 1600 (63.0") *1100 (2425)
1.58 (2.07) 1700 (66.9") *1500 (2535)
1.68 (2.20) 1800 (70.9") *1200 (2646)
PW210-1 1.8 (5'11") 2.41 (7'11") 2.925 (9'7")
0.36 (0.47) 0.33 (0.43) 560 (22") 665 (26.2") 410 (904)
0.50 (0.65) 0.45 (0.59) 750 (29.5") 855 (33.7") 440 (970)
0.80 (1.05) 0.70 (0.92) 1045 (44.1") 1150 (45.3") 576 (1270)
0.93 (1.22) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 590 (1301)
1.05 (1.37) 0.90 (1.12) 1330 (52.4") 1435 (56.5") 656 (1433)
1.17 (1.53) 1.00 (1.31) 1450 (57.1") *660 (1455)
1.40 (1.83) 1.20 (1.57) 1680 (66.1") *710 (1565)
PW220-7 1.8 (5'11") 2.4 (7'11") 2.9 (9'6") 3.5 (11'6")
0.48 (0.63) 600 (23.6") *480 (1058)
0.55 (0.72) 700 (27.6") *530 (1168)
0.63 (0.82) 800 (31.5") *580 (1279)
0.71 (0.93) 900 (35.4") *610 (1345
0.78 (1.02) 1000 (39.4") *650 (1433)
0.86 (1.12) 1100 (43.3") *700 (1543)
0.96 (1.26) 1200 (47.2") *760 (1675)
1.03 (1.35) 1300 (51.2") *810 (1786)
1.11 (1.45) 1400 (55.1") *870 (1918)
1.19 (1.56) 1500 (59.1") *930 (2050)
1.49 (1.95) 1600 (63.0") *1100 (2425)
1.58 (2.07) 1700 (66.9") *1500 (2535)
1.68 (2.20) 1800 (70.9") *1200 (2646)
* Without side cutters
3F-11
Lifting Capacity WHEEL-TYPE
EXCAVATORS
L
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
Cf : Rating over front
B Cs : Rating over side
MAX : Rating at maximum reach
L : Arm length
C
kg(lb) FVBH0027
Conditions:
Bucket (SAE) : 0.232 m3 (0.30 cu.yd), Tires : 7.50-20 unit : kg (lb)
A MAX 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs
Arm length 1700 mm (5'7") With blade and outrigger above ground
4.5 m 1050* 700
(15') (2300) (1550)
3.0 m 1150* 700 1200* 1000
(10') (2550) (1550) (2650) (2200)
1.5 m 1200* 650 1250* 950 2800* 2000
(5') (2650) (1450) (2750) (2100) (6150) (4400)
0m 1350* 600 1400* 900 2800* 2050
(0') (2950) (1300) (3100) (2000) (6150) (4500)
1.5 m 1450* 700 1500* 850 2750* 1950
(5') (3200) (1550) (3300) (1850) (6050) (4300)
Arm length 2100 mm (6'11") With blade and outrigger above ground
4.5 m 1000* 650
(15') (2200) (1450)
3.0 m 1100* 650 1150* 950
(10') (2400) (1450) (2550) (2100)
1.5 m 1150* 600 1200* 900 2800* 1950
(5') (2550) (1300) (2650) (2000) (6150) (4300)
0m 1300* 550 1350* 850 2750* 2000
(0') (2850) (1200) (2950) (1850) (6050) (4400)
1.5 m 1400* 650 1450* 800 2700* 1900
(5') (3100) (1450) (3200) (1750) (5950) (4200)
Arm length 1700 mm (5'7") With blade and outrigger on ground
4.5 m 1150* 750
(15') (2550) (1650)
3.0 m 1250* 750 1300* 1100
(10') (2750) (1650) (2850) (2400)
1.5 m 1300* 700 1350* 1050 2900* 2900*
(5') (2850) (1550) (2950) (2300) (6400) (6400)
0m 1450* 650 1500* 1000 2850* 2850*
(0') (3200) (1450) (3300) (2200) (6250) (6250)
1.5 m 1550* 750 1600* 950 2800* 2800*
(5') (3400) (1650) (3500) (2100) (6150) (6150)
Arm length 2100 mm (6'11") With blade and outrigger on ground
4.5 m 1100* 700
(15') (2400) (1550)
3.0 m 1200* 700 1250* 1050
(10') (2650) (1550) (2750) (2300)
1.5 m 1250* 650 1300* 1000 2850* 2850*
(5') (2750) (1450) (2850) (2200) (6250) (6250)
0m 1400* 600 1450* 950 2800* 2800*
(0') (3100) (1300) (3200) (2100) (6150) (6150)
1.5 m 1500* 700 1550* 900 2750* 2750*
(5') (3300) (1550) (3400) (2000) (6050) (6050)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard No.J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-12
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW75R-2 (Two piece boom)
Conditions:
Bucket (SAE): 0.232 m3 (0.30 cu.yd), Tires:7.50-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1700 mm (5'7") With blade and outrigger above ground
4.5 m 650 500 1100 1000
(15') (1450) (1100) (2400) (2200)
3.0 m 600 450 750 450 1100 950
(10') (1300) (1000) (1650) (1000) (2400) (2100)
1.5 m 550 400 700 450 1200 900
(5') (1200) (900) (1550) (1000) (2650) (2000)
0m 550 350 700 400 1200 850 2400* 1800
(0') (1200) (800) (1550) (900) (2650) (1850) (5300) (3950)
1.5 m 650 500 1100 700 2500* 1500
(5') (1450) (1100) (2400) (1550) (5500) (3300)
Arm length 2100 mm (6'11") With blade and outrigger above ground
4.5 m 600 450 1000 950
(15') (1300) (1000) (2200) (2100)
3.0 m 550 400 700 500 1000 900
(10') (1200) (900) (1550) (1100) (2200) (2000)
1.5 m 500 350 700 450 1100 850
(5') (1100) (750) (1550) (1000) (2400) (1850)
0m 500 300 650 350 1100 800 2300* 1750
(0') (1100) (650) (1450) (750) (2400) (1750) (5050) (3850)
1.5 m 600 450 1000 650 2400* 1450
(5') (1300) (1000) (2200) (1450) (5300) (3200)
Arm length 1700 mm (5'7") With blade and outrigger on ground
4.5 m 1100* 600 1200* 1050
(15') (2400) (1300) (2650) (2300)
3.0 m 1000* 550 1050* 600 1200* 1000
(10') (2200) (1200) (2300) (1300) (2650) (2200)
1.5 m 950* 450 1000* 600 1250* 950
(5') (2100) (1000) (2200) (1300) (2750) (2100)
0m 1050* 450 1100* 550 1250* 900 2500* 1900
(0') (2300) (1000) (2400) (1200) (2750) (2000) (5500) (4200)
1.5 m 1150* 600 1150* 850 2600* 1600
(5') (2550) (1300) (2550) (1850) (5700) (3500)
Arm length 2100 mm (6'11") With blade and outrigger on ground
4.5 m 1000* 550 1000* 600 1100* 1000
(15') (2200) (1200) (2200) (1300) (2400) (2200)
3.0 m 900* 500 1000* 550 1100* 950
(10') (2000) (1100) (2200) (1200) (2400) (2100)
1.5 m 850* 450 950* 500 1150* 900
(5') (1850) (1000) (2100) (1100) (2550) (2000)
0m 950* 400 1050* 450 1150* 850 2400* 1850
(0') (2100) (900) (2300) (1000) (2550) (1850) (5300) (4050)
1.5 m 1050* 550 1100* 800 2500* 1550
(5') (2300) (1200) (2400) (1750) (5500) (3400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3F-13
Lifting Capacity WHEEL-TYPE
EXCAVATORS
L
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
Cf : Rating over front
B
Cs : Rating over side
MAX : Rating at maximum reach
C L : Arm length
kg(lb) FVBH0027
3F-14
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (One piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 1000 900 2100 1900
(15') (2200) (2000) (4600) (4200)
3.0 m 800 700 950 700 1900* 1700
(10') (1750) (1550) (2100) (1550) (4200) (3750)
1.5 m 700 600 850 650 1550 1400 3900* 2600
(5') (1550) (1300) (1850) (1450) (3600) (3100) (8600) (5700)
0m 750 650 1400 1300 3750* 2400
(0') (1650) (1450) (3100) (2850) (8250) (5300)
1.5 m 850 750 1650 1500 3500* 2400
(5') (1850) (1650) (3650) (3300) (7700) (5300)
3.0 m 1100 1000 3200* 2500
(10') (2400) (2200) (7050) (5500)
Arm length 2000 mm (6'7") With blade and outrigger above ground
4.5 m 950 850 1000 900 2000 1800
(15') (2100) (1850) (2200) (2000) (4400) (3950)
3.0 m 850 650 900 800 1700 1550
(10') (1850) (1450) (2000) (1750) (3750) (3400)
1.5 m 750 550 800 700 1450 1300 3800* 2500
(5') (1650) (1200) (1750) (1550) (3200) (2850) (8350) (5500)
0m 700 600 800 700 1300 1250 3600* 2250
(0') (1550) (1300) (1750) (1550) (2850) (2750) (7900) (4950)
1.5 m 800 700 1550 1400 3400* 2200
(5') (1750) (1550) (3400) (3100) (7500) (4850)
3.0 m 1050 950 1650 1500 3100* 2250
(10') (2300) (2100) (3650) (3300) (6800) (4950)
Arm length 2300 mm (7'7") With blade and outrigger above ground
4.5 m 900 800 950 850 1900 1750
(15') (2000) (1750) (2100) (1850) (4200) (3850)
3.0 m 700 600 850 750 1650 1500
(10') (1550) (1300) (1850) (1650) (3650) (3300)
1.5 m 600 500 750 650 1350 1200 3750* 2400
(5') (1300) (1100) (1650) (1450) (2950) (2650) (8250) (5300)
0m 650 550 750 600 1250 1100 3500* 2100
(0') (1450) (1200) (1650) (1300) (2750) (2400) (7700) (4600)
1.5 m 750 650 1450 1300 3300* 2000
(5') (1650) (1450) (3200) (2850) (7250) (4400)
3.0 m 1000 900 1550 1400 3000* 2050
(10') (2200) (2000) (3400) (3100) (6600) (4500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3F-15
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (One piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit:kg(lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger on ground
4.5 m 1100 1000 2400* 2000
(15') (2400) (2200) (5300) (4400)
3.0 m 900 800 1400* 800 2300* 1800
(10') (2000) (1750) (3100) (1750) (5050) (3950)
1.5 m 800 700 1200* 750 2250* 1500 3900* 3900*
(5') (1750) (1550) (2650) (1650) (4950) (3300) (8600) (8600)
0m 850 750 2100* 1400 3750* 3750*
(0') (1850) (1650) (4600) (3100) (8250) (8250)
1.5 m 950 850 2200* 1600 3500* 3500*
(5') (2100) (1850) (4850) (3500) (7700) (7700)
3.0 m 1200 1100 3200* 3200*
(10') (2650) (2400) (7050) (7050)
Arm length 2000 mm (6'7") With blade and outrigger on ground
4.5 m 1050 950 1500* 1000 2300* 1900
(15') (2300) (2100) (3300) (2200) (5050) (4200)
3.0 m 850 750 1250* 900 2200* 1900
(10') (1850) (1650) (2750) (2000) (4850) (4200)
1.5 m 750 650 1100* 800 2100* 1400 3800* 3800*
(5') (1650) (1450) (2400) (1750) (4600) (3100) (8350) (8350)
0m 800 700 1000* 850 2000* 1350 3600* 3600*
(0') (1750) (1550) (2200) (1850) (4400) (2950) (7900) (7900)
1.5 m 900 800 2100* 1500 3400* 3400*
(5') (2000) (1750) (4600) (3300) (7500) (7500)
3.0 m 1100 1000 2250* 1600 3100* 3100*
(10') (2400) (2200) (4950) (3500) (6800) (6800)
Arm length 2300 mm (7'7") With blade and outrigger on ground
4.5 m 1000 900 1400* 950 2200* 1850
(15') (2200) (2000) (3100) (2100) (4850) (4050)
3.0 m 800 700 1100* 850 2100* 1600
(10') (1750) (1550) (2400) (1850) (4600) (3500)
1.5 m 700 600 1000* 750 2000* 1300 3750* 3750*
(5') (1550) (1300) (2200) (1650) (4400) (2850) (8250) (8250)
0m 750 650 950* 700 1900* 1200 3500* 3500*
(0') (1650) (1450) (2100) (1550) (4200) (2650) (7700) (7700)
1.5 m 850 750 2000* 1400 3300* 3300*
(5') (1850) (1650) (4400) (3100) (7250) (7250)
3.0 m 1100 1000 2150* 1500 3000* 3000*
(10') (2400) (2200) (4750) (3300) (6600) (6600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3F-16
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (Two piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 900 800 900 800 2200 2000
(15') (2000) (1750) (2000) (1750) (4850) (4400)
3.0 m 750 650 800* 700 2000 1800
(10') (1650) (1450) (1750) (1550) (4400) (3950)
1.5 m 550 450 750* 650 1700 1500
(5') (1200) (1000) (1650) (1450) (3750) (3300)
0m 550 450 700 600 1500 1400
(0') (1200) (1000) (1550) (1300) (3300) (3100)
1.5 m 700 550 850 750 1700 1600 3600* 3600*
(5') (2550) (1200) (1850) (1650) (3750) (3500) (7900) (7900)
3.0 m 900 800 1850 1700 3300* 3300*
(10') (2000) (1750) (4050) (3750) (7250) (7250)
Arm length 2000 mm (6'7") With blade and outrigger above ground
4.5 m 850 750 900 800 2100 1900
(15') (1850) (1650) (2000) (1750) (4600) (4200)
3.0 m 700 600 800 700 1800 1650
(10') (1550) (1300) (1750) (1550) (3950) (3650)
1.5 m 500 400 750 650 1600 1400
(5') (1100) (900) (1650) (1450) (3500) (3100)
0m 550 400 700 600 1400 1350
(0') (1200) (900) (1550) (1300) (3100) (2950)
1.5 m 550 450 750 700 1700 1500 3500* 3500*
(5') (1200) (1000) (1650) (1550) (3750) (3300) (7700) (7700)
3.0 m 850 750 1750 1600 3200* 3200*
(10') (1850) (1650) (3850) (3500) (7050) (7050)
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 1000 900 1750* 900 2500* 2100
(15') (2200) (2000) (3850) (2000) (5500) (4600)
3.0 m 850 750 1500* 800 2400* 1900
(10') (1850) (1650) (3300) (1750) (5300) (4200)
1.5 m 650 550 1300* 750 2350* 1600
(5') (1450) (1200) (2850) (1650) (5150) (3500)
0m 700 550 1200* 700 2200* 1500
(0') (1550) (1200) (2650) (1550) (4850) (3300)
1.5 m 750 650 1250* 850 2300* 1700 3600* 3600*
(5') (1650) (1450) (2750) (1850) (5050) (3750) (7900) (7900)
3.0 m 1000 900 2500* 1750 3300* 3300*
(10') (2200) (2000) (5500) (3850) (7250) (7250)
Arm length 2000 mm (6'7") With blade and outrigger on ground
4.5 m 950 850 1000* 900 2400* 2000
(15') (2100) (1850) (3500) (2000) (5300) (4400)
3.0 m 800 700 1400* 800 2300* 1750
(10') (1750) (1550) (3100) (1750) (5050) (3850)
1.5 m 600 500 1200* 750 2200* 1500
(5') (1300) (1100) (2650) (1650) (4850) (3300)
0m 650 550 1100* 700 2100* 1450
(0') (1450) (1200) (2400) (1550) (4600) (3200)
1.5 m 700 550 1150 800 2200* 1600 3500* 3500*
(5') (1550) (1200) (2550) (1850) (4850) (3500) (7700) (7700)
3.0 m 950 850 2300* 1700 3200* 3200*
(10') (2100) (1850) (5050) (3750) (7050) (7050)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
3F-17
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2200 3450* 3300*
(20') (5100) (4800) (7600) (7300)
4.5 m 2150* 1650 3550* 1950 3800* 3250
(15') (4700) (3600) (7800) (4300) (8400) (7100)
3.0 m 2200* 1450 3850 1850 4700* 3050 6750* 5850
(10') (4800) (3200) (8500) (4100) (10300) (6700) (14800) (12900)
1.5 m 2350* 1350 3750 1800 5650* 2800 7400* 5250
(5') (5200) (3000) (8200) (4000) (12400) (6200) (16300) (11500)
0.0 m 2700* 1400 3650 1700 6000 2650 7550* 5000
(0') (5900) (3100) (8000) (3700) (13200) (5800) (16600) (11000)
1.5 m 3400* 1650 3650 1700 5900 2650 8950* 5000 5800* 5800*
(5') (7500) (3600) (8000) (3700) (13000) (5800) (19700) (11000) (12800) (12800)
3.0 m 3850* 2250 4800* 2700 7200* 5150
(10') (8500) (4900) (10600) (5900) (15800) (11300)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2300* 3450* 3450*
(20') (5100) (5100) (7600) (7600)
4.5 m 2150* 2150* 3550* 2950 3800* 3800*
(15') (4700) (4700) (7880) (6500) (8400) (8400)
3.0 m 2200* 2200* 3850* 2900 4700* 4700* 6750* 6750*
(10') (4800) (4800) (8500) (6400) (10300) (10300) (14800) (14800)
1.5 m 2350* 2150 4000* 2800 5650* 4450 7400* 7400*
(5') (5200) (4700) (8800) (6200) (12400) (9800) (16300) (16300)
0.0 m 2700* 2250 3950 2700 6150* 4250 7550* 7550*
(0') (5900) (4900) (8700) (5900) (13500) (9300) (16600) (16600)
1.5 m 3400* 2600 3900 2700 6000* 4200 8950* 8650 5800* 5800*
(5') (7500) (5700) (8600) (5900) (13200) (9200) (19700) (19000) (12800) (12800)
3.0 m 3850* 3550 4800* 4300 7200* 7200*
(10') (8500) (7800) (10600) (9500) (15800) (15800)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2300* 3450* 3450*
(20') (5100) (5100) (7600) (7600)
4.5 m 2150* 2150* 3550* 2450 3800* 3800*
(15') (4700) (4700) (7800) (5400) (8400) (8400)
3.0 m 2200* 1850 3700* 2400 4700* 3900 6750* 6750*
(10') (4800) (4100) (8100) (5300) (10300) (8600) (14800) (14800)
1.5 m 2350* 1750 3600 2300 5650* 3650 7400* 7050
(5') (5200) (3800) (7900) (5100) (12400) (8000) (16300) (15500)
0.0 m 2700* 1850 3550 2250 5700 3500 7550* 6800
(0') (5900) (4100) (7800) (4900) (12500) (7700) (16600) (15000)
1.5 m 3350 2150 3500 2250 5650 3450 8950* 6800 5800* 5800*
(5') (7400) (4700) (7700) (4900) (12400) (7600) (19700) (15000) (12800) (12800)
3.0 m 3850* 2900 4800* 3550 7200* 6950
(10') (8500) (6400) (10600) (7800) (15800) (15300)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 1800 3450* 2750
(20') (5100) (4000) (7600) (6000)
4.5 m 2150* 1350 3050 1600 3800* 2700
(15') (4700) (3000) (6700) (3500) (8400) (5900)
3.0 m 2200* 1150 3000 1550 4700* 2500 6750* 4750
(10') (4800) (2500) (6600) (3400) (10300) (5500) (14800) (10400)
1.5 m 2200 1100 2900 1450 4650 2300 7400* 4200
(5') (4800) (2400) (6400) (3200) (10200) (5100) (16300) (9200)
0.0 m 2300 1100 2800 1400 4500 2150 7550* 3950
(0') (5100) (2400) (6200) (3100) (9900) (4700) (16600) (8700)
1.5 m 2650 1300 2800 1350 4550 2100 8950* 3950 5800* 5800*
(5') (5800) (2900) (6200) (3000) (10000) (4600) (19700) (8700) (12800) (12800)
3.0 m 3700 1850 4550 2200 7200* 4100
(10') (8100) (4100) (10000) (4800) (15800) (9000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-18
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 1950
(20') (4100) (4100) (4400) (4300)
4.5 m 1750* 1500 3300* 2000 3450* 3300*
(15') (3800) (3300) (7300) (4400) (7600) (7300)
3.0 m 1800* 1300 3700* 1900 4400* 3100 6050* 6050*
(10') (4000) (2900) (8100) (4200) (9700) (6800) (13300) (13300)
1.5 m 1950* 1250 3800 1800 5400* 2900 8650* 5400
(5') (4300) (2700) (8400) (4000) (11900) (6400) (19000) (11900)
0.0 m 2200* 1300 3700 1750 6000 2700 7950* 5050
(0') (4800) (2900) (8100) (3800) (13200) (5900) (17500) (11100)
1.5 m 2750* 1450 3650 1700 5950 2650 9300* 5000 5250* 5250*
(5') (6000) (3200) (8000) (3700) (13100) (5800) (20500) (11000) (11500) (11500)
3.0 m 3750* 1950 5250* 2650 7900* 5100 8800* 8800*
(10') (8200) (4300) (11500) (5800) (17400) (11200) (19400) (19400)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 2000*
(20') (4100) (4100) (4400) (4400)
4.5 m 1750* 1750* 3300* 3000 3450* 3450*
(15') (3800) (3800) (7300) (6600) (7600) (7600)
3.0 m 1800* 1800* 3700* 2950 4400* 4400* 6050* 6050*
(10') (4000) (4000) (8100) (6500) (9700) (9700) (13300) (13300)
1.5 m 1950* 1950* 4050 2800 5400* 4500 8650* 8650*
(5') (4300)* (4300) (8900) (6200) (11900) (16500) (19000) (19000)
0.0 m 2200* 2050 3950 2750 6050* 4300 7950* 7950*
(0') (4800) (4500) (8700) (6000) (13300) (9500) (17500) (17500)
1.5 m 2750* 2350 3900 2700 6100* 4250 9300* 8650 5250* 5250
(5') (6000) (5200) (8600) (5900) (13400) (9300) (20500) (19000) (11500) (11500)
3.0 m 3750* 3050 5250* 4250 7900* 7900* 8800* 8800*
(10') (8200) (6700) (11500) (9300) (17400) (17400) (19400) (19400)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 2000*
(20') (4100) (4100) (4400) (4400)
4.5 m 1750* 1750* 3300* 2500 3450* 3450*
(15') (3800) (3800) (7300) (5500) (7600) (7600)
3.0 m 1800* 1700 3700* 2450 4400* 3950 6050* 6050*
(10') (4000) (3700) (8100) (5400) (9700) (8700) (13300) (13300)
1.5 m 1950* 1650 3650 2350 5400* 3700 8650* 7250
(5') (4300) (3600) (8000) (5200) (11900) (8100) (19000) (15900)
0.0 m 2200* 1700 3550 2250 5750 3550 7950* 6850
(0') (4800) (3700) (7800) (4900) (12600) (7800) (17500) (15100)
1.5 m 2750* 1900 3500 2250 5650 3450 9300* 6800 5250* 5250*
(5') (6000) (4200) (7700) (4900) (12400) (7600) (20500) (15000) (11500) (11500)
3.0 m 3750* 2500 *5250 3450 7900* 6900 8800* 8800*
(10') (8200) (5500) (11500) (7600) (17400) (15200) (19400) (19400)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1600 2000* 1600
(20') (4100) (3500) (4400) (3500)
4.5 m 1750* 1200 3100 1650 3450* 2750
(15') (3800) (2600) (6800) (3600) (7600) (6000)
3.0 m 1800* 1050 3000 1550 4400* 2600 6050* 5000
(10') (4000) (2300) (6600) (3400) (9700) (5700) (13300) (11000)
1.5 m 1950* 1000 2900 1500 4750 2350 8650* 4350
(5') (4300) (2200) (6400) (3300) (10400) (5200) (19000) (9600)
0.0 m 2100 1000 2800 1400 4550 2200 7950* 4000
(0') (4600) (2200) (6200) (3100) (10000) (4800) (17500) (8800)
1.5 m 2400 1150 2800 1350 4450 2100 9300* 3950 5250* 5250*
(5') (5300) (2500) (6200) (3000) (9800) (4600) (20500) (8700) (11500) (11500)
3.0 m 3150 1550 4450 2150 7900* 4050 8800* 8800*
(10') (6900) (3400) (9800) (4700) (17400) (8900) (19400) (19400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-19
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 1950 3100* 3100*
(20') (4800) (4300) (6800) (6800)
4.5 m 2050* 1500 3250* 1900 3350* 3200
(15') (4500) (3300) (7100) (4200) (7400) (7000)
3.0 m 2050* 1300 3600* 1850 4450* 3000 6700* 5800
(10') (4500) (2900) (7900) (4100) (9800) (6600) (14700) (12800)
1.5 m 2150 1200 3750 1750 5350 2750
(5') (4700) (2600) (8200) (3800) (11800) (6000)
0.0 m 2450 1250 3650 1650 5850 2600 5300* 4900
(0') (5400) (2700) (8000) (3600) (12900) (5700) (11700) (10800)
1.5 m 2950 1450 3600 1650 5750 2550 8600 4950 4550 4550
(5') (6500) (3200) (7900) (3600) (12600) (5600) (18900) (10900) (10000) (10000)
3.0 m 3500 1950 4850* 2600 7150 5050
(10') (7700) (4300) (10700) (5700) (15700) (11100)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 2200* 3100* 3100*
(20') (4800) (4800) (6800) (6800)
4.5 m 2050* 2050* 3250* 2950 3550* 3550*
(15') (4500) (4500) (7100) (6500) (7800) (7800)
3.0 m 2050* 2050* 3600* 2850 4450* 4450* 6700* 6700*
(10') (4500) (4500) (7900) (6300) (9800) (9800) (14700) (14700)
1.5 m 2150* 2000 4000* 2750 5350* 4400
(5') (4700) (4400) (8800) (6000) (11800) (9700)
0.0 m 2450* 2050 3900 2700 5850* 4200 5300* 5300*
(0') (5400) (4500) (8600) (5900) (12900) (9200) (11700) (11700)
1.5 m 2950* 2350 3900 2650 5750* 4150 8600* 8600* 4550* 4550*
(5') (6500) (5200) (8600) (5800) (12600) (9100) (18900) (18900) (10000) (10000)
3.0 m 3500* 3150 4850* 4250 7150* 7150*
(10') (7700) (6900) (10700) (9300) (15700) (15700)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 2200* 3100* 3100*
(20') (4800) (4800) (6800) (6800)
4.5 m 2050* 1950 3250* 2450 3550* 3550*
(15') (4500) (4300) (7100) (5400) (7800) (7880)
3.0 m 2050* 1700 3600* 2350 4450* 3850 6700* 6700*
(10') (4500) (3700) (7900) (5200) (9800) (8500) (14700) (14700)
1.5 m 2150* 1600 3600 2250 5350* 3600
(5') (4700) (3500) (7900) (4900) (11800) (7900)
0.0 m 2450* 1700 3500 2200 5650 3450 5300* 5300*
(0') (5400) (3700) (7700) (4800) (12400) (7600) (11700) (11700)
1.5 m 2950* 1900 3500 2150 5600 3400 8600* 6750 4550* 4550*
(5') (6500) (4200) (7700) (4700) (12300) (7500) (18900) (14800) (10000) (10000)
3.0 m 3500* 2600 4850* 3450 7150* 6900
(10') (7700) (5700) (10700) (7600) (15700) (15200)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 1600 3100* 2750
(20') (4800) (3500) (6800) (6000)
4.5 m 2050* 1200 3050 1650 3550* 2700
(15') (4500) (2600) (6700) (3600) (7800) (5900)
3.0 m 2050* 1000 2950 1600 4450* 2450 6700* 4700
(10') (4500) (2200) (6500) (3500) (9800) (5400) (14700) (10300)
1.5 m 2050 950 2850 1500 4650 2250
(5') (4500) (2100) (6300) (3300) (10200) (4900)
0.0 m 2100 1000 2750 1400 4450 2100 5300* 3850
(0') (4600) (2200) (6000) (3100) (9800) (4600) (11700) (8500)
1.5 m 2400 1150 2750 1400 4400 2050 8600* 3900 4550* 4550*
(5') (5300) (2500) (6000) (3100) (9700) (4500) (18900) (8600) (10000) (10000)
3.0 m 3250 1600 4500 2100 7150* 4000
(10') (7100) (3500) (9900) (4600) (15700) (8800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-20
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100* 3000* 3000*
(25') (4600) (4600) (6600) (6600)
6.0 m 1800* 1700 2900* 1950
(20') (4000) (3700) (6400) (4300)
4.5 m 1650* 1350 3000* 1950 3200* 3200*
(15') (3600) (3000) (6600) (4300) (7000) (7000)
3.0 m 1650* 1200 3400* 1900 4150* 3100 5900* 5900*
(10') (3600) (2600) (7500) (4200) (9100) (6800) (13000) (13000)
1.5 m 1750* 1100 3750 1750 5150* 2800 6300* 5300
(5') (3800) (2400) (8200) (3800) (11300) (6200) (13900) (11700)
0.0 m 2000* 1150 3650 1700 5800* 2650 5700* 4950
(0') (4400) (2500) (7900) (3700) (12800) (5800) (12550) (10900)
1.5 m 2400* 1300 3600 1650 5850* 2550 8450* 4900
(5') (5300) (2900) (7900) (3600) (12900) (5600) (18600) (10800)
3.0 m 3300* 1700 5200* 2600 7750* 5000
(10') (7300) (3700) (11400) (5700) (17000) (11000)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100*
(25') (4600) (4600)
6.0 m 1800* 1800* 2900* 2900*
(20') (4000) (4000) (6400) (6400)
4.5 m 1650* 1650* 3000* 3000 3200* 3200*
(15') (3600) (3600) (6600) (6600) (7000) (7000)
3.0 m 1650* 1650* 3400* 2900 4150* 4150* 5900* 5900*
(10') (3600) (3600) (7500) (6400) (9100) (9100) (13000) (13000)
1.5 m 1750* 1750* 3850* 2800 5150* 4450 6300* 6300*
(5') (3800) (3800) (8500) (6200) (11300) (9800) (13900) (13900)
0.0 m 2000* 1900 3900 2700 5800* 4250 5700* 5700*
(0') (4400) (4200) (8600) (5900) (12800) (9300) (12500) (12500)
1.5 m 2400* 2150 3900 2650 5850* 4200 8450* 8450* 4200* 4200*
(5') (5300) (4700) (8600) (5800) (12900) (9200) (18600) (18600) (9200) (9200)
3.0 m 3300* 2700
(10') (7300) (5900)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100*
(25') (4600) (4600)
6.0 m 1800* 1800* 2900* 2500
(20') (4000) (4000) (6400) (5500)
4.5 m 1650* 1650* 3000* 2500 3200* 3200*
(15') (3600) (3600) (6600) (5500) (7000) (7000)
3.0 m 1650* 1550 3400* 2400 4150* 3950 5900* 5900*
(10') (3600) (3400) (7500) (5300) (9100) (8700) (13000) (13000)
1.5 m 1750* 1500 3650 2300 5150* 3650 6300* 6300*
(5') (3800) (3300) (8000) (5100) (11300) (8000) (13900) (13900)
0.0 m 2000* 1550 3500 2200 5700 3450 5700* 5700*
(0') (4400) (3400) (7700) (4800) (12500) (7600) (12500) (12500)
1.5 m 2400* 1750 3500 2150 5600 3400 8450* 6750 4200* 4200*
(5') (5300) (3800) (7700) (4700) (12300) (7500) (18600) (14800) (9200) (9200)
3.0 m 3300* 2250 5200* 3450 7750* 8650
(10') (7300) (4900) (11400) (7600) (17000) (19000)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100* 3000* 2750
(25') (4600) (4600) (6600) (6000)
6.0 m 1800* 1400 2900* 1600
(20') (4000) (3100) (6400) (3500)
4.5 m 1650* 1100 3000* 1600 3200* 2750
(15') (3600) (2400) (6600) (3500) (7000) (6000)
3.0 m 1650* 950 3000 1550 4150* 2550 5900* 4950
(10') (3600) (2100) (6600) (3400) (9100) (5600) (13000) (10900)
1.5 m 1750* 850 2900 1450 4700 2300 6300 4200
(5') (3800) (1900) (6400) (3200) (10300) (5000) (13900) (9200)
0.0 m 1950 900 2800 1350 4500 2100 5700 3900
(0') (4300) (2000) (6200) (3000) (9900) (4600) (12500) (8600)
1.5 m 2200 1050 2750 1300 4400 2050 8450* 3850 4200* 4200*
(5') (4800) (2300) (6000) (2900) (9700) (4500) (18600) (8500) (9200) (9200)
3.0 m 2800 1350 4450 2100 7750* 3950
(10') (6200) (3000) (9800) (4600) (17000) (8700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-21
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom with rotary arm)
Conditions:
Boom: 4800 mm (15'9"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1950* 1950*
(25') (4300) (4300)
6.0 m 1600* 1600* 2600* 2600*
(20') (3500) (3500) (5700) (5700)
4.5 m 1500* 1500* 2650* 2650* 2850* 2850*
(15') (3300) (3300) (5800) (5800) (6300) (6300)
3.0 m 1500* 1500* 3000* 2650 3700* 3700* 5300* 5300*
(10') (3300) (3300) (6600) (5800) (8100) (8100) (11700) (11700)
1.5 m 1600* 1550 3450* 2500 4600* 4050 6850* 6850*
(5') (3500) (3400) (7600) (5500) (10100) (8900) (15100) (15100)
0.0 m 1750* 1600 3600 2350 5250* 3800 5700* 5700*
(0') (3800) (3500) (7900) (5200) (11500) (8400) (12500) (12500)
1.5 m 2100* 1800 3550 2300 5300* 3700 8250* 7750 4000* 4000*
(5') (4600) (4000) (7800) (5100) (11700) (8100) (18100) (17000) (8800) (8800)
3.0 m 2900* 2350 3100* 2400 4750* 3750 7150* 7150* 7200* 7200*
(10') (6400) (5200) (6800) (5300) (10400) (8200) (15700) (15700) (15800) (15800)
Front and rear outrigger above ground Arm length 2600 mm (8'6")
7.5 m 1950* 1950*
(25') (4300) (4300)
6.0 m 1600* 1600* 2600* 2600*
(20') (3500) (3500) (5700) (5700)
4.5 m 1500* 1500* 2650* 2650* 2850* 2850*
(15') (3300) (3300) (5800) (5800) (6300) (6300)
3.0 m 1500* 1500* 3000* 3000* 3700* 3700* 5300* 5300*
(10') (3300) (3300) (6600) (6600) (8100) (8100) (11700) (11700)
1.5 m 1600* 1600* 3450* 3400 4600* 4600* 6850* 6850*
(5') (3500) (3500) (7600) (7500) (10100) (10100) (15100) (15100)
0.0 m 1750* 1750* 3450 2350 5250* 5250* 5700* 5700*
(0') (3800) (3800) (7600) (5200) (11500) (11500) (12500) (12500)
1.5 m 2100* 2100* 3550 2300 5300* 5200 8250* 8250* 4000* 4000*
(5') (4600) (4600) (7800) (5100) (11700) (11400) (18100) (18100) (8800) (8800)
3.0 m 2900* 2900* 3100* 3100* 4750* 4750* 7150* 7150* 7200* 7200*
(10') (6400) (6400) (6800) (6800) (10400) (10400) (15700) (15700) (15800) (15800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-22
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2350 3900* 2500 4450* 4050
(15') (5500) (5150) (8550) (5500) (9800) (9800)
3.0 m 2450* 2050 4350 2450 5400* 3900
(10') (5400) (4500) (9550) (5400) (11850) (8550)
1.5 m 2600* 1950 4700* 2400 6250* 3600
(5') (5700) (4300) (10300) (5250) (13750) (7900)
0.0 m 2950* 2050 4850* 2350 6700* 3600 5950* 5950*
(0') (6500) (4500) (10650) (5150) (14750) (7900) (13100) (13100)
1.5 m 3700* 2400 6300* 3550 9300* 6700 5450* 5450*
(5') (8100) (5250) (13850) (7800) (20450) (14750) (12000) (12000)
3.0 m 3950* 3450 4500* 3700 7050* 6900
(10') (8700) (7600) (9900) (8150) (15500) (15150)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100*
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2500* 3900* 3850 4450* 4450*
(15') (5500) (5500) (8550) (8450) (9800) (9800)
3.0 m 2450* 2450* 4350* 3800 5400* 5400*
(10') (5400) (5400) (9550) (8350) (11850) (11850)
1.5 m 2600* 2600* 4700* 3750 6250* 5800
(5') (5700) (5700) (10350) (8250) (13750) (12750)
0.0 m 2950* 2950* 4850* 3700 6700* 5750 5950* 5950*
(0') (6500) (6500) (10650) (8100) (14750) (12650) (13100) (13100)
1.5 m 3700* 3700* 6300* 5750 9300* 9300* 5450* 5450*
(5') (8100) (8100) (13850) (12650) (20450) (20450) (12000) (12000)
3.0 m 3950* 3950* 4500* 4500* 7050* 7050*
(10') (8700) (8700) (9900) (9900) (15500) (15500)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100*
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2500* 3900* 3200 4450* 4450*
(15') (5500) (5500) (8550) (7050) (9800) (9800)
3.0 m 2450* 2450* 4350* 3150 5400* 5000
(10') (5400) (5400) (9550) (6900) (11850) (11000)
1.5 m 2600* 2550 4400* 3100 6250* 4750
(5') (5700) (5600) (9650) (6800) (13750) (10450)
0.0 m 2950* 2650 4350 3050 6700* 4700 5950* 5950*
(0') (6500) (5800) (9550) (6700) (14750) (10350) (13100) (13100)
1.5 m 3700* 2350 6300* 4700 9300* 9300* 5450* 5450*
(5') (8100) (5150) (13850) (10350) (20450) (20450) (12000) (12000)
3.0 m 3950* 3950 4500* 4500* 7050* 7050*
(10') (8700) (8700) (9900) (9900) (15500) (15500)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2550 4100* 3400*
(20') (6050) (5600) (9000) (7450)
4.5 m 2500* 1900 3800 2500 4450* 3350
(15') (5500) (4150) (8350) (5500) (9800) (7350)
3.0 m 2450* 1650 7500 2000 5400* 3200
(10') (5400) (3600) (16500) (4400) (11850) (7050)
1.5 m 2600* 1550 3700 1950 5800 2950
(5') (5500) (3400) (8100) (4300) (12750) (6500)
0.0 m 2950* 1650 3650 1900 5750 2900 5950* 5250
(0') (6500) (3600) (8700) (4150) (12650) (6350) (13100) (11550)
1.5 m 3700* 1950 5750 2900 9300* 5350 5450* 5450*
(5') (8100) (4300) (12750) (6350) (20450) (11750) (12000) (12000)
3.0 m 3950* 2800 4500* 3000 7050* 5500
(10') (8700) (6150) (9900) (6600) (15500) (12100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-23
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 2500 4050* 4050*
(15') (4300) (4300) (8350) (5500) (8900) (8900)
3.0 m 1950* 1850* 4150* 2450 5050* 3900 7250* 7250*
(10') (4300) (4050) (9100) (5400) (11100) (8550) (15950) (15950)
1.5 m 2050* 1800 4550* 2400 6050* 3700 6150* 6150*
(5') (4500) (3950) (10000) (5250) (13300) (8150) (13500) (13500)
0.0 m 2350* 1850 4800* 2300 6650* 3550 6500* 6500*
(0') (5150) (4050) (10550) (5050) (14600) (7800) (14300) (14300)
1.5 m 2900* 2150 4500* 2300 6450* 3550 9750* 6700 5000* 5000*
(5') (6350) (4700) (9900) (5050) (14200) (7800) (21450) (14750) (11000) (11000)
3.0 m 3900* 2900 5250* 3600 7850* 6850
(10') (8550) (6350) (11550) (7900) (17250) (15050)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 3800* 4050* 4050*
(15') (4300) (4300) (8350) (8350) (8900) (8900)
3.0 m 1950* 1950* 4150* 3800 5050* 5050* 7250* 7250*
(10') (4300) (4300) (9100) (8350) (11100) (11100) (15950) (15950)
1.5 m 2050* 2050* 4550* 3750 6050* 5900 6150* 6150*
(5') (4500)* (4500) (10000) (8250) (13300) (12950) (13500) (13500)
0.0 m 2350* 2350* 4800* 3650 6650* 5750 6500* 6500*
(0') (5150) (5150) (10550) (8000) (14600) (12650) (14300) (14300)
1.5 m 2900* 2900* 4500* 3650 6450* 5700 9750* 9750* 5000* 5000*
(5') (6350) (6350) (9900) (8000) (14200) (12550) (21450) (21450) (11000) (11000)
3.0 m 3900* 3900* 5250* 5250* 7850* 7850*
(10') (8550) (8550) (11550) (11550) (17250) (17250)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 3200 4050* 4050*
(15') (4300) (4300) (8350) (7050) (8900) (8900)
3.0 m 1950* 1950* 4150* 3150 5050* 5050* 7250* 7250*
(10') (4300) (4300) (9100) (6900) (11100) (11100) (15950) (15950)
1.5 m 2050* 2050* 4400 3100 6050* 4800 6150* 6150*
(5') (4500) (4500) (9650) (6800) (13300) (10550) (13500) (13500)
0.0 m 2350* 2350* 4350 3000 6650* 4700 6500* 6500*
(0') (5150) (5150) (9550) (6600) (14600) (10350) (14300) (14300)
1.5 m 2900* 2800 4350 3000 6450* 4650 9750* 9250 5000* 5000*
(5') (6350) (6150) (9550) (9550) (14200) (10200) (21450) (20350) (11000) (11000)
3.0 m 3900* 3750 5250* 4700 7850* 7850*
(10') (8550) (8250) (11550) (10350) (17250) (17250)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3400
(20') (4600) (4600) (5790) (7450)
4.5 m 1950* 1700 3800* 2050 4050* 3400
(15') (4300) (3750) (8350) (4500) (8900) (7450)
3.0 m 1950* 1500 3750 2000 5050* 3200 7250* 5950
(10') (4300) (3300) (8250) (4400) (11100) (11100) (15950) (13100)
1.5 m 2050* 1400 3700 1950 5900 3000 6150* 5500
(5') (4500) (3050) (8150) (4300) (12950) (6600) (13500) (12100)
0.0 m 2350* 1500 3600 1850 5750 2900 6500* 5300
(0') (5150) (3300) (7900) (4050) (12650) (6350) (14300) (11650)
1.5 m 2900* 1700 3600 1850 5700 2850 9750* 5300 5000* 5000*
(5') (6350) (3750) (7900) (4050) (12550) (6250) (21450) (11650) (11000) (11000)
3.0 m 3900* 2350 5250* 2900 7850* 5400
(10') (8550) (5150) (11550) (6350) (17250) (11850)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-24
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2500
(20') (3600) (3600) (5800) (5500)
4.5 m 1550* 1550* 3400* 2500 3500* 3500*
(15') (3400) (3400) (7450) (5500) (7700) (7700)
3.0 m 1550* 1550* 3800* 2450 4500* 3950 6150* 6150*
(10') (3400) (3400) (8350) (5400) (9900) (8700) (13500) (13500)
1.5 m 1650* 1550* 4300* 2350 5650* 3700 9100* 6950
(5') (3600) (3400) (9450) (5150) (12400) (8150) (20000) (15300)
0.0 m 1850* 1600 4650* 2250 6400* 3500 6800* 6600
(0') (4050) (3500) (10200) (4950) (14050) (7700) (14950) (14500)
1.5 m 2200* 1800 4650* 2250 6500* 3450 9350* 6550 4300* 4300*
(5') (4850) (3950) (10200) (4950) (14300) (7600) (20550) (14400) (9450) (9450)
3.0 m 3050* 2350 5650* 3400 8600* 6650 7700* 7700*
(10') (6700) (5150) (12400) (7450) (18900) (14600) (16950) (16950)
Blade and rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2650*
(20') (3600) (3600) (5800) (5800)
4.5 m 1550* 1550* 3400* 3400* 3500* 3500*
(15') (3400) (3400) (7450) (7450) (7700) (7700)
3.0 m 1550* 1550* 3800* 3800* 4500* 4500* 6150* 6150*
(10') (3400) (3400) (8350) (8350) (9900) (9900) (13500) (13500)
1.5 m 1650* 1650* 4300* 3700 5650* 5650* 9100* 9100*
(5') (3600) (3600) (9450) (8150) (12400) (12400) (20000) (20000)
0.0 m 1850* 1850* 4650* 3600 6400* 5700 6800* 6800*
(0') (4050) (6500) (10200) (7900) (14050) (12550) (14950) (14950)
1.5 m 2200* 2200* 4650* 3600 6500* 5650 9350* 9350* 4300* 4300*
(5') (4850) (4850) (10200) (7900) (14300) (12650) (20550) (20550) (9450) (9450)
3.0 m 3050* 3050* 5650* 5600 8600* 8600* 7700* 7700*
(10') (6700) (6700) (12400) (12300) (18900) (18900) (16950) (16950)
Rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2650*
(20') (3600) (3600) (5800) (5800)
4.5 m 1550* 1550* 3400* 3200 3500* 3500*
(15') (3400) (3400) (7450) (7050) (7700) (7700)
3.0 m 1550* 1550* 3800* 2450 4500* 4500* 6150* 6150*
(10') (3400) (3400) (8350) (5400) (9900) (9900) (13500) (13500)
1.5 m 1650* 1650* 4300* 2350 5650* 4850 9100* 9100*
(5') (3600) (3600) (9450) (5150) (12400) (10650) (20000) (20000)
0.0 m 1850* 1850* 4650* 3600 6400* 4650 6800* 6800*
(0') (4050) (6500) (10200) (7900) (14050) (10200) (14950) (14950)
1.5 m 2200* 2200* 4650* 3600 6500* 4550 9350* 9100 4300* 4300*
(5') (4850) (4850) (10200) (7900) (14300) (10000) (20550) (20000) (9450) (9450)
3.0 m 3050* 3050* 5650* 4500 8600* 8600* 7700* 7700*
(10') (6700) (6700) (12400) (9900) (18900) (18900) (16950) (16950)
Blade above ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2050
(20') (3600) (3600) (5800) (4500)
4.5 m 1550* 1450 3400* 2050 3500* 3400
(15') (3400) (3200) (7450) (4500) (7700) (7450)
3.0 m 1650* 1250 3750 2000 4500* 3250 6150* 6150*
(10') (3600) (3750) (8250) (4400) (9900) (7150) (13500) (13500)
1.5 m 1650* 1200 3650 1900 5650* 3000 9100* 5500
(5') (3600) (2650) (8000) (4150) (12400) (6600) (20000) (12100)
0.0 m 1850* 1250 3550 1800 5700 2850 6800* 5200
(0') (4050) (2750) (7800) (3950) (12550) (6250) (14950) (11450)
1.5 m 2200* 1450 3500 1800 5650 2750 9350* 5150 4300* 4300*
(5') (4850) (3200) (7700) (3950) (12740) (6050) (20550) (11300) (9450) (9450)
3.0 m 3050* 1900 5600 2750 8600* 5250 7700* 7700*
(10') (6700) (4150) (12300) (6050) (18900) (11550) (16950) (16950)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-25
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 3300* 3300*
(25') (7250) (7250)
6.0 m 2550* 2550* 4250* 4050*
(20') (5600) (5600) (9350) (8900)
4.5 m 2350* 2150 4350* 2450 4750* 4000
(15') (5150) (5150) (9550) (5400) (10450) (8800)
3.0 m 2400* 1900 4700* 2400 5900* 3800
(10') (5250) (4150) (10350) (5250) (12950) (8350)
1.5 m 2550* 1800 5150* 2300 6950* 3650
(5') (5600) (3950) (11300) (5050) (15300) (8000)
0.0 m 2950* 1900 5300* 2250 7050* 3500 4800* 4800*
(0') (6500) (4150) (11650) (4950) (15500) (7700) (10500) (10500)
1.5 m 3700* 2200 4800* 2250 7050* 3500 10050* 6700
(5') (8150) (4850) (10550) (4950) (15500) (7700) (22100) (14750)
3.0 m 4500* 3100 5450* 3600 8150* 6850
(10') (9900) (6800) (12000) (7900) (17900) (15050)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 4250*
(20') (5700) (5700) (9350) (9350)
4.5 m 2400* 2400* 4350* 3800 4800* 4800*
(15') (5250) (5250) (9550) (8350) (10550) (10550)
3.0 m 2450* 2450* 4700* 3750 5900* 5900*
(10') (5400) (5400) (10350) (8250) (12950) (12950)
1.5 m 2600* 2600* 5150* 3700 6950* 5800
(5') (5700) (5700) (11300) (8150) (15300) (12750)
0.0 m 2950* 2950* 5300* 3650 7350* 5700 4850* 4850*
(0') (6500) (6500) (11650) (8000) (16150) (12550) (10650) (10650)
1.5 m 3750* 3550 4850* 3650 7050* 5700 10100* 10100*
(5') (8250) (7800) (10650) (8000) (15500) (12550) (22200) (22200)
3.0 m 4500* 4500* 5450* 5450* 8100* 8100*
(10') (9900) (9900) (12000) (12000) (17900) (17900)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 4250*
(20') (5700) (5700) (9350) (9350)
4.5 m 2400* 2400* 4350* 3150 4800* 4800*
(15') (5250) (5250) (9550) (6900) (10550) (10550)
3.0 m 2450* 2450* 4450 3100 5900* 4950
(10') (5400) (5400) (9800) (6800) (12950) (10900)
1.5 m 2600* 2400 4400 3050 6950* 4750
(5') (5700) (5250) (9650) (6700) (15300) (10450)
0.0 m 2950* 2500 4300 2950 6950 4650 4850* 4850*
(0') (6500) (5500) (9450) (6500) (15300) (10200) (10650) (10650)
1.5 m 3750* 2900 4300 3000 6950 4600 10100* 9200
(5') (8250) (6350) (9450) (6600) (15300) (10100) (22200) (20250)
3.0 m 4500* 4050 5450* 4700 8100* 8100*
(10') (9900) (8900) (12000) (10350) (17900) (17900)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 3950
(20') (5700) (5700) (9350) (8700)
4.5 m 2400* 2100 3750 2350 4800* 3850
(15') (5400) (4600) (8250) (5150) (10550) (8450)
3.0 m 2450* 1800 3700 2300 5900* 3700
(10') (4500) (3950) (8150) (5050) (12950) (8150)
1.5 m 2600* 1750 3650 2250 5850 3500
(5') (5700) (3850) (8000) (4950) (12850) (7700)
0.0 m 2950* 1850 3550 2200 5700 3400 4850* 4850*
(0') (6500) (4050) (7800) (4850) (12550) (7450) (10650) (10650)
1.5 m 3500 2150 3600 2200 5700 3350 10100* 6400
(5') (5300) (4700) (7900) (4850) (12550) (7350) (22200) (14050)
3.0 m 4500* 3000 5450* 3450 8100* 6600
(10') (9900) (6600) (12000) (7600) (15700) (14500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-26
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 2450 4350* 4050
(15') (4150) (4150) (8800) (5400) (9550) (8900)
3.0 m 1900* 1700 4450* 2400 5500* 3850 8300* 7400
(10') (4150) (3750) (9800) (5250) (12100) (8450) (18250) (16250)
1.5 m 2050* 1650 4950* 2300 6650* 3650
(5') (4500) (3600) (10900) (5050) (14600) (8000)
0.0 m 2350* 1700 5300* 2250 7300* 3500 5350* 5350*
(0') (5150) (3750) (11650) (4950) (16050) (5800) (11750) (11750)
1.5 m 2900* 2000 5100* 2250 7150* 3450 9100* 6600 4550* 4550*
(5') (6350) (4400) (11200) (4950) (15700) (5600) (20000) (14500) (10000) (10000)
3.0 m 4200* 2650 6050* 3500 8950* 6700
(10') (9250) (5800) (13300) (7700) (19700) (14750)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 3850 4350* 4350*
(15') (4150) (4150) (8800) (8450) (9550) (9550)
3.0 m 1900* 1900* 4450* 3800 5500* 5500* 8300* 8300*
(10') (4150) (4150) (9800) (8350) (12100) (12100) (18250) (18250)
1.5 m 2050* 2050* 4950* 3700 6650* 5850
(5') (4500) (4500) (10900) (8150) (14600) (12850)
0.0 m 2350* 2350* 5300* 3600 7300* 5700 5350* 5350*
(0') (5150) (5150) (11650) (7900) (16050) (12550) (11750) (11750)
1.5 m 2900* 2900* 5100* 3600 7150* 5650 9100* 9100* 4550* 4550*
(5') (6350) (6350) (11200) (7900) (15700) (12400) (20000) (20000) (10000) (10000)
3.0 m 4200* 4200* 6050* 5700 8950* 8950*
(10') (9250) (9250) (13300) (12550) (19700) (19700)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 3200 4350* 4350*
(15') (4150) (4150) (8800) (7050) (9550) (9550)
3.0 m 1900* 1900* 4450* 3100 5500* 5050 8300* 8300*
(10') (4150) (4150) (9800) (6800) (12100) (11100) (18250) (18250)
1.5 m 2050* 2050* 4400 3050 6650* 4750
(5') (4500) (4500) (9650) (6700) (14500) (10450)
0.0 m 2350* 2250 4300 2950 6950 4650 5350* 5350*
(0') (5150) (4950) (9450) (6500) (15300) (10200) (11750) (11750)
1.5 m 2900* 2600 4300 2950 6900 4600 9100* 9100* 4550* 4550*
(5') (6350) (5700) (9450) (6500) (15150) (10100) (20000) (20000) (10000) (10000)
3.0 m 4200* 3450 6050* 4650 8950* 8950*
(10') (9250) (7600) (13300) (10200) (19700) (19700)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3400
(20') (4500) (4500) (8350) (7450)
4.5 m 1900* 1550 3800 2000 4350* 3350
(15') (4150) (3400) (8350) (4400) (9550) (7350)
3.0 m 1900* 1350 3750 1950 5500* 3150 8300* 5950
(10') (4150) (2950) (8250) (4300) (12100) (6900) (18250) (13100)
1.5 m 2050* 1300 3650 1850 5850 2950
(5') (4500) (2850) (8000) (4050) (12850) (6500)
0.0 m 2350* 1350 3550 1800 5700 2800 5350* 5200
(0') (5150) (2950) (7800) (3950) (12550) (6150) (11750) (11450)
1.5 m 2900* 1600 3550 1800 5650 2800 9100* 5200 4550* 4550*
(5') (6350) (3500) (7800) (3950) (12400) (6150) (20000) (11450) (10000) (10000)
3.0 m 4150 2100 5700 2850 8950* 5300
(10') (9100) (4600) (12550) (6250) (19700) (11650)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-27
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2500
(20') (3400) (3400) (6350) (5500)
4.5 m 1450* 1450* 3600* 2450 3750* 3750*
(15') (3200) (3200) (7900) (5400) (8250) (8250)
3.0 m 1500* 1500* 4100* 2400 4900* 3850 6950* 6950*
(10') (3300) (3300) (9000) (5250) (10750) (8450) (15300) (15300)
1.5 m 1550* 1400 4700* 2300 6200* 3600 6550* 6550*
(5') (3400) (3050) (10350) (5050) (13650) (7900) (14400) (14400)
0.0 m 1750* 1500 5100* 2200 7050* 3450 5550* 5550*
(0') (3850) (3300) (11200) (4850) (15500) (7600) (12200) (12200)
1.5 m 2150* 1650 5150* 2150 7200* 3350 8050* 6450 3850* 3850*
(5') (4700) (3600) (11300) (4700) (15850) (7350) (17700) (14200) (8450) (8450)
3.0 m 2950* 2150 4300* 2200 6500* 3400 9700* 6550 7050* 7050*
(10') (6500) (4700) (9450) (4850) (14300) (7450) (21350) (14400) (15500) (15500)
Blade and rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2900*
(20') (3400) (3400) (6350) (6350)
4.5 m 1450* 1450* 3600* 3600* 3750* 3750*
(15') (3200) (3200) (7900) (7900) (8250) (8250)
3.0 m 1500* 1500* 4100* 3750 4900* 4900* 6950* 6950*
(10') (3300) (3300) (9000) (8250) (10750) (10750) (15300) (15300)
1.5 m 1550* 1550* 4700* 3650 6200* 5850 6550* 6550*
(5') (3400) (3400) (10350) (8000) (13650) (12850) (14400) (14400)
0.0 m 1750* 1750* 5100* 3550 7050* 5650 5550* 5550*
(0') (3850) (3850) (11200) (7800) (15500) (12400) (12200) (12220)
1.5 m 2150* 2150* 5150* 3500 7200* 5550 8050* 8050* 3850* 3850*
(5') (4700) (4700) (11300) (7700) (15850) (12200) (17700) (17700) (8450) (8450)
3.0 m 2950* 2950* 4300* 3550 6500* 5600 9700* 9700* 7050* 7050*
(10') (6500) (6500) (9450) (7800) (14300) (12300) (21350) (21350) (15500) (15500)
Rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2900*
(20') (3400) (3400) (6350) (6350)
4.5 m 1450* 1450* 2900* 3200 3750* 3750*
(15') (3200) (3200) (6350) (7050) (8250) (8250)
3.0 m 1500* 1500* 4100* 3100 4900* 4900* 6950* 6950*
(10') (3300) (3300) (9000) (6800) (10750) (10750) (15300) (15300)
1.5 m 1550* 1550* 4350 3000 6200* 4750 6550* 6550*
(5') (3400) (3400) (9550) (6600) (13650) (10450) (14400) (14400)
0.0 m 1750* 1750* 4250 2900 6900 4550 5550* 5550*
(0') (3850) (3850) (9350) (6350) (15150) (10000) (12200) (12200)
1.5 m 2150* 2150* 4200 2850 6800 4500 8050* 8050* 3850* 3850*
(5') (4700) (4700) (9250) (6250) (14950) (9900) (17700) (17700) (8450) (8450)
3.0 m 2950* 2800 4250 2900 6500* 4500 9700* 9100 7050* 7050*
(10') (6500) (6150) (9430) (6350) (14300) (9900) (21350) (20000) (15500) (15500)
Blade above ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2050
(20') (3400) (3400) (6350) (4500)
4.5 m 1450* 1300 3600* 2000 3750* 3350
(15') (3200) (2850) (7900) (4400) (8250) (7350)
3.0 m 1500* 1150 3700 1950 4900* 3150 6950* 6100
(10') (3300) (2500) (8150) (4300) (10750) (6900) (15300) (13400)
1.5 m 1550* 1100 3600 1850 5850 2950 6550* 5400
(5') (3400) (2400) (7900) (4050) (12850) (6500) (14400) (11850)
0.0 m 1750* 1150 3500 1750 5650 2750 5550* 5100
(0') (3850) (2500) (7700) (3850) (12400) (6050) (12200) (11200)
1.5 m 2150* 1300 3450 1700 5550 2700 8050* 5050 3850* 3850*
(5') (4700) (2850) (7600) (3750) (12200) (5950) (17700) (11100) (8450) (8450)
3.0 m 2950* 1700 3500 1750 5600 2700 9700* 5150 7050* 7050*
(10') (6500) (3750) (7700) (3850) (12300) (5950) (21350) (11300) (15500) (15500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-28
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom with rotary arm)
Conditions:
Boom: 4800 mm (15'9"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1850* 1850*
(25') (4050) (4050)
6.0 m 1550* 1550 2850* 2850*
(20') (3400) (3400) (6250) (6250)
4.5 m 1400* 1400* 3400* 3400* 3600* 3600*
(15') (3050) (3050) (7450) (7450) (7900) (7900)
3.0 m 1400* 1400* 3850* 3850* 4650* 4650* 6700* 6700*
(10') (3050) (3050) (8450) (8450) (10200) (10200) (14750) (14750)
1.5 m 1500* 1500* 4400* 4250 5850* 5850* 6600* 6600*
(5') (3300) (3300) (9650) (9350) (12850) (12850) (14500) (14500)
0.0 m 1700* 1700* 4800* 4800* 6650* 6650* 5650* 5650*
(0') (3750) (3750) (10550) (10550) (14600) (14600) (12400) (12400)
1.5 m 2050* 2050* 4800* 4050 6750* 6650 8200* 8200* 3950* 3950*
(5') (4500) (4500) (10550) (8900) (14850) (14600) (18050) (18050) (8700) (8700)
3.0 m 2850* 2850* 3700* 3700* 6050* 6050* 9050* 9050*
(10') (6250) (6250) (8150) (8150) (13300) (13300) (19900) (19900)
Front and rear outrigger above ground Arm length 2600 mm (8'6")
7.5 m 1850* 1850*
(25') (4050) (4300)
6.0 m 1550* 1550* 2850* 2850*
(20') (3400) (3400) (6250) (6250)
4.5 m 1400* 1400* 3400* 3400* 3600* 3600*
(15') (3050) (3050) (7450) (7450) (7900) (7900)
3.0 m 1400* 1400* 3850* 3550 4650* 4650* 6700* 6700*
(10') (3050) (3050) (8450) (7800) (10200) (10200) (14750) (14750)
1.5 m 1500* 1500* 4400* 3400 5500 5850* 6600* 6600*
(5') (3300) (3300) (9650) (7450) (12100) (12850) (14500) (14500)
0.0 m 1700* 1700* 4800* 3300 5250 6650* 5650* 5650*
(0') (3750) (3750) (10550) (7250) (11550) (14600) (12400) (12400)
1.5 m 2050* 2050* 4800* 3250 5150 6550 8200* 8200* 3950* 3950*
(5') (4500) (4500) (10550) (7150) (11300) (14400) (18050) (18050) (8700) (8700)
3.0 m 2850* 2850* 3700* 3300 5200 6050* 9050* 9050*
(10') (6250) (6250) (8150) (7250) (11450) (13300) (19900) (19900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-29
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket(SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3450* 4350* 4350* 5000* 5000*
(15') (7600) (7600) (9600) (9600) (11000) (11000)
3.0 m 3500* 3450 4750* 4750* 6100* 6100*
(10') (7700) (7600) (10400) (10400) (13400) (13400)
1.5 m 3750* 3300 5250* 4600 7150* 7150*
(5') (8200) (7200) (11500) (10100) (15700) (15700)
0.0 m 4250 3400 5500* 4500 7600* 7200
(0') (9300) (7500) (12100) (9900) (16700) (15800)
1.5 m 4550* 3850 5300* 4450 7350* 7150 9450* 9450*
(5') (10000) (8500) (11600) (9800) (16200) (15700) (20800) (20800)
3.0 m 4450* 4450* 6200* 6200* 8700* 8700*
(10') (9800) (9800) (13600) (13600) (19100) (19100)
Blade above ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 2700
(20') (8000) (5900)
4.5 m 3450* 2050 4350* 2650 5000* 4400
(15') (7600) (4500) (9600) (5800) (11000) (9700)
3.0 m 3500* 1750 4750* 2500 6100* 4000
(10') (7700) (5800) (10400) (5500) (13400) (8800)
1.5 m 3750* 1650 5250* 2350 7150* 3650
(5') (8200) (3600) (11500) (5200) (15700) (8000)
0.0 m 4050 1700 5400 2250 7800* 3450
(0') (8900) (3700) (11900) (4900) (17100) (7600)
1.5 m 4550* 1950 5300* 2250 7350* 3400 9450* 6550
(5') (10000) (4300) (11600) (4900) (16200) (7500) (20800) (14400)
3.0 m 4450 2550 6200* 3550 8700* 6800
(10') (9800) (5600) (13600) (7800) (19100) (14900)
Front outrigger on ground and rear blade above ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3200 4350* 4050* 5000* 5000*
(15') (7600) (7000) (9600) (8900) (11000) (11000)
3.0 m 3500* 2800 4750* 3900 6100* 6100*
(10') (7700) (6100) (10400) (8600) (13400) (13400)
1.5 m 3750* 2650 5250* 3750 7150* 5850
(5') (8200) (5800) (11500) (8200) (15700) (12900)
0.0 m 4250* 2750 5500* 3600 7600* 5650
(0') (9300) (6000) (12100) (7900) (16700) (12400)
1.5 m 4550* 3100 5300* 3600 7350* 5600 9450* 9450*
(5') (10000) (6800) (11600) (7900) (16200) (12300) (20800) (20800)
3.0 m 4450* 4050 6200* 5700 8700* 8700*
(10') (9800) (8900) (13600) (12500) (19100) (19100)
Front and rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3450* 4350* 4350* 5000* 5000*
(15') (7600) (7600) (9600) (9600) (11000) (11000)
3.0 m 3500* 3500* 4750* 4750* 6100* 6100*
(10') (7700) (7700) (10400) (10400) (13400) (13400)
1.5 m 3750* 3450 5250* 4850 7150* 7150*
(5') (8200) (7600) (11500) (10700) (15700) (15700)
0.0 m 4250* 3600* 5500* 4750 7600* 7600*
(0') (9300) (7900) (12100) (10400) (16700) (16700)
1.5 m 4550* 4050 5300* 4700 7350* 7350* 9450* 9450*
(5') (10000) (8900) (11600) (10300) (16200) (16200) (20800) (20800)
3.0 m 4450* 4450* 8200* 8200* 8700* 8700*
(10') (9800) (9800) (18000) (18000) (19100) (19100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-30
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'11"), Bucket(SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4700* 4600* 4600*
(20') (7800) (7800) (10300) (10300) (10100) (10100)
4.5 m 3350* 3350* 4950* 4950* 5500* 5500*
(15') (7400) (7400) (10900) (10900) (12100) (12100)
3.0 m 3300* 3300* 5450* 4800 7050* 7050*
(10') (7300) (7300) (12000) (10600) (15500) (15500)
1.5 m 3500* 3250 5800 4650 8550* 7450
(5') (7700) (7100) (12800) (10200) (18800) (16400)
0.0 m 3850* 3400 5700 4550 9400* 7300
(0') (8500) (7500) (12500) (10000) (20700) (16100)
1.5 m 4600* 3900 5700 4500 9450* 7250 9050* 9050*
(5') (10100) (8600) (12500) (9900) (20800) (15900) (19900) (19900)
3.0 m
(10')
Blade above ground Arm length 1800 mm (5'11")
7.5 m 4250* 3850 4850* 4450
(25') (9300) (8500 (10700) (9800)
6.0 m 3550* 2450* 4700* 2650 4600* 4500
(20') (7800) (5400) (10300) (5800) (10100) (9900)
4.5 m 3350* 1950 4950* 2600 5500* 4300
(15') (9400) (4300) (10900) (5700) (12100) (9500)
3.0 m 3300* 1700 5450* 2500 7050* 3950
(10') (7300) (3700) (12000) (5500) (15500) (8700)
1.5 m 3500* 1650 5550 2350 8550* 3650
(5') (7700) (3600) (12200) (5200) (18800) (8000)
0.0 m 3850* 1700 5450 2300 9050 3500
(0') (8500) (3700) (12200) (5100) (19900) (7700)
1.5 m 4600* 1950 5450 2250 9050 3500 9050* 6750
(5') (10100) (4300) (12200) (4900) (19900) (7700) (19900) (14800)
3.0 m
(10')
Front outrigger on ground and rear blade above ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4050 4600* 4600*
(20') (7800) (7800) (10300) (8900) (10100) (10100)
4.5 m 3350* 3050* 4950* 4000 5500* 5500*
(15') (7400) (6700) (10900) (8800) (12100) (12100)
3.0 m 3300* 2700* 5450* 3900 7050* 6250
(10') (7300) (5900) (12000) (8600) (15500) (13700)
1.5 m 3500* 2600* 5950* 3750 8550* 5850
(5') (7700) (5700) (13100) (8200) (18800) (12900)
0.0 m 3850* 2750 6550* 3650 9400* 5700
(0') (8500) (6000) (14400) (8000) (20700) (12500)
1.5 m 4600* 3150 6850* 3650 9450* 5700 9050* 9050*
(5') (10100) (6900) (15100) (8000) (20800) (12500) (19900) (19900)
3.0 m 8750* 5700
(10') (19200) (12500)
Front and rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4700* 4600* 4600*
(20') (7800) (7800) (10300) (10300) (10100) (10100)
4.5 m 3350* 3350* 4950* 4950* 5500* 5500*
(15') (7400) (7400) (10900) (10900) (12100) (12100)
3.0 m 3300* 3300* 5450* 5050 7050* 7050*
(10') (7300) (7300) (12000) (11100) (15500) (15500)
1.5 m 3500* 3400 5950* 4900 8550* 7850
(5') (7700) (7500) (13100) (10800) (18800) (17300)
0.0 m 3850* 3600 6550* 4800 9400* 7650
(0') (8500) (7900) (14400) (10600) (20700) (16800)
1.5 m 2800* 2800 6850* 4800 9450* 7650 9050* 9050*
(5') (6200) (6200) (15100) (10500) (20800) (16800) (19900) (19900)
3.0 m
(10')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-31
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7000) (7000)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 3900 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5610) (5610) (9800) (8600) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 2550* 5000* 3700 6800* 5850
(5') (5100) (5100) (7700) (5600) (11000) (8100) (15000) (12900)
0.0 m 2650* 2500 2700* 2500 5350* 3550 7450* 5600 5700* 5700*
(0') (5800) (5500) (5900) (5500) (11800) (7800) (16400) (12300) (12500) (12500)
1.5 m 3250* 2750 5300* 3500 7400* 5500 9350* 9350*
(5') (7100) (6050) (11700) (7700) (16300) (12100) (20600) (20600)
3.0 m 4350* 3500 4450* 3550 6550* 5550 9400* 9400*
(10') (9600) (7700) (9800) (7800) (14400) (12200) (20700) (20700)
Front and rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7000) (7000)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 4450* 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5610) (5610) (9800) (9800) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 3300 5000* 4850 6800* 6800
(5') (5100) (5100) (7700) (7300) (11000) (10700) (15000) (15000)
0.0 m 2650* 2650* 2700* 2700* 5350* 4700 7450* 7450* 5700* 5700*
(0') (5800) (5800) (5900) (5900) (11800) (10300) (16400) (16400) (12500) (12500)
1.5 m 3250* 3250* 5300* 4600 7400* 7400* 9350* 9350*
(5') (7100) (7100) (11700) (10100) (16300) (16300) (20600) (20600)
3.0 m 4350* 4350* 4450* 4450* 6550* 6550* 9400* 9400*
(10') (9600) (9600) (9800) (9800) (14400) (14400) (20700) (20700)
Rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7040) (7040)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 4450* 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5600) (5600) (9800) (9800) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 3150 5100* 4800 6800* 6800*
(5') (5100) (5100) (7700) (6900) (11200) (10600) (15000) (15000)
0.0 m 2650* 2650* 2700* 2700* 5350* 4450 7450* 7150 5700* 5700*
(0') (5800) (5800) (5900) (5900) (11800) (9800) (16400) (15700) (12500) (12500)
1.5 m 3250* 3250* 5300* 4350 7400* 7050 9350* 9350*
(5') (7100) (7100) (11700) (9600) (16300) (15500) (20800) (20800)
3.0 m 4350* 4350* 4450* 4450 6550* 6550* 9400* 9400*
(10') (9600) (9600) (9800) (9800) (14400) (14400) (20700) (20700)
Blade above ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 2700
(20') (4600) (4600) (7040) (5900)
4.5 m 2050* 1850 4000* 2650 4500* 4450
(15') (4500) (4100) (8800) (5830) (9900) (9800)
3.0 m 2100* 1550 2550* 1600 4450* 2500 5650* 4050 8750* 7750
(10') (4600) (3400) (5600) (3500) (9800) (5500) (12400) (8900) (19200) (17000)
1.5 m 2300* 1450 3500* 1550 5000* 2300 6800* 3650
(5') (5100) (3200) (7700) (3400) (11000) (5100) (15000) (8000)
0.0 m 2650* 1500 2700* 1500 5350 2200 7450* 3400 5700* 5700*
(0') (5800) (3300) (5900) (3300) (11800) (4800) (16400) (7500) (12500) (12500)
1.5 m 3250* 1700 5300 2150 7400* 3350 9350* 6400
(5') (7100) (3700) (11700) (4700) (16300) (7400) (20800) (14100)
3.0 m 4350* 2150 4450* 2200 6550* 3400 9400* 6600
(10') (9600) (4700) (9800) (4800) (14400) (7500) (20700) (14500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-32
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900 1900* 3250* 3200 5200* 4750 6500* 6500*
(10') (4200) (4200) (7100) (7000) (11400) (10400) (14300) (14300)
1.5 m 2050* 2050* 3950 3150 5700* 4600 8100* 7450
(5') (4500) (4500) (8700) (6900) (12500) (10100) (17800) (16400)
0.0 m 2300* 2300* 3050* 3050* 5650 4450 9100 7200 5150* 5150*
(0') (5100) (5100) (6700) (6700) (12400) (9800) (20000) (15800) (11300) (11300)
1.5 m 2800* 2800* 5600 4450 9350 7150 9100* 9100*
(5') (6200) (6200) (12300) (9800) (20600) (15700) (20000) (20000)
3.0 m 8750* 7250
(10') (19200) (15900)
Blade above ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 2650
(20') (4300) (4300) (8400) (5800)
4.5 m 1900* 1700 4500* 2800 4950* 4350
(15') (4200) (3700) (9900) (6200) (10900) (9600)
3.0 m 1900 1500 3250* 1600 5200* 2450 6500* 4000
(10') (4200) (3300) (7100) (3500) (11400) (5400) (14300) (8800)
1.5 m 2050* 1450 3750 1550 5550 2300 8100* 3650
(5') (4500) (3200) (8700) (3400) (12200) (5100) (17800) (8000)
0.0 m 2300* 1500 3050* 1500 5400 2200 9000 3450 5150* 5150*
(0') (5100) (3300) (6700) (3300) (11900) (4800) (19800) (7600) (11300) (11300)
1.5 m 2800* 1700 5350 2200 8950 3400 9100* 6550
(5') (6200) (3700) (11800) (4800) (19700) (7500) (20000) (14400)
3.0 m 8750* 3500
(10') (19200) (7700)
Front outrigger on ground and rear blade above ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900* 1900* 3250* 2600 5200* 3850 6500* 6250
(10') (4200) (4200) (7100) (5700) (11400) (8500) (14300) (13700)
1.5 m 2050* 2050* 4050* 2550 5700* 3700 8100* 5850
(5') (4500) (4500) (8900) (5600) (12500) (8100) (17800) (12900)
0.0 m 2300* 2300* 3050* 2500 6250* 3550 9100* 5650 5150* 5150*
(0') (5100) (5100) (6700) (5500) (13700) (7800) (20000) (12400) (11300) (11300)
1.5 m 2800* 2800 6800* 3550 9400* 5600 9100* 9100*
(5') (6200) (6200) (15000) (7800) (20700) (12300) (20000) (20000)
3.0 m 8750* 5700
(10') (19200) (12500)
Front and rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900* 1900* 3250* 3250* 5200* 5000 6500* 6500
(10') (4200) (4200) (7100) (7100) (11400) (11000) (14300) (14300)
1.5 m 2050* 2050* 4050* 3350 5700* 4850 8100* 7850
(5') (4500) (4500) (8900) (7370) (12500) (10700) (17800) (17300)
0.0 m 2300* 2300* 3050* 3050* 6250* 4700 9100* 7850 5150* 5150*
(0') (5100) (5100) (6700) (6700) (13700) (10300) (20000) (17300) (11300) (11300)
1.5 m 2800* 2800 6800* 4700 9400* 7550 9100* 9100*
(5') (6200) (6200) (15000) (10300) (20700) (16600) (20000) (20000)
3.0 m 8750* 7850
(10') (19200) (17300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-33
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 3100* 4250* 4250* 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (6800) (9300) (9300) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 3150 4850* 4600 6450* 6450* 6750* 6750*
(5') (4200) (4200) (8700) (6900) (10700) (10100) (14200) (14200) (14800) (14800)
0.0 m 2200* 2200* 3850 3050 5250* 4450 7300* 7200 6400* 6400*
(0') (4800) (4800) (8500) (6700) (11500) (9800) (16100) (15800) (14100) (14100)
1.5 m 2750* 2750* 5350* 4350 7450* 7050 9100* 9100*
(5') (6000) (6000) (11800) (9600) (16400) (15500) (20000) (20000)
3.0 m 3900* 3900* 4800* 4400 6800* 6800* 9950* 9950*
(10') (8600) (8600) (10600) (9700) (15000) (15000) (21900) (21900)
Blade above ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 2700
(20') (3700) (3700) (6900) (5900)
4.5 m 1650* 1650* 3700* 2650
(15') (3600) (3600) (8100) (5800)
3.0 m 1700* 1450 3100* 1600 4250* 2500 5300* 4150 7750* 7750*
(10') (3700) (3200) (6800) (3500) (9300) (5500) (11700) (9100) (17000) (17000)
1.5 m 1900* 1350 3750 1550 4850* 2350 6450* 3650 6750* 6750*
(5') (4200) (3000) (8200) (3400) (10700) (5200) (14200) (8000) (14800) (14800)
0.0 m 2200* 1400 3700 1500 5250* 2200 7300* 3450 6400* 6400*
(0') (4800) (3100) (8100) (3300) (11500) (4800) (16100) (7600) (14100) (14100)
1.5 m 2750* 1550 5250 2100 7450* 3300 9100* 6350
(5') (6000) (3400) (11500) (4600) (16400) (7300) (20000) (14000)
3.0 m 3900* 1950 4800* 2150 6800* 3350 9500* 6500
(10') (8600) (4300) (10600) (4700) (15000) (7400) (21000) (14300)
Front outrigger on ground and rear blade above ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 2600 4250* 3900 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (5700) (9300) (8600) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 2550 4850* 3700 6450* 5850 6750* 6750*
(5') (4200) (4200) (8700) (5600) (10700) (8100) (14200) (12900) (14800) (14800)
0.0 m 2200* 2200* 3900* 2450 5250* 3550 7300* 5600 6400* 6400*
(0') (4800) (4800) (8600) (5400) (11500) (7800) (16100) (12300) (14100) (14100)
1.5 m 2750* 2550 5350* 3450 7450* 5500 9100* 9100*
(5') (6000) (5600) (11800) (7600) (16400) (12100) (20000) (20000)
3.0 m 3900* 3150 4800* 3500 6800* 5500 9950* 9950*
(10') (8600) (6900) (10600) (7700) (15000) (12100) (21900) (21900)
Front and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 3100* 4250* 4250* 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (6800) (9350) (9350) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 3300 4850* 4850* 6450* 6450* 6750* 6750*
(5') (4200) (4200) (8700) (7300) (10700) (10700) (14200) (14200) (14800) (14800)
0.0 m 2200* 2200* 3900* 3250 5250* 4700 7300* 7300* 6400* 6400*
(0') (4800) (4800) (8600) (7100) (11500) (10300) (16100) (16100) (14100) (14100)
1.5 m 2750* 2750* 5350* 4600 7450* 7450* 9100* 9100*
(5') (6000) (6000) (11800) (10100) (16400) (16400) (20000) (20000)
3.0 m 3900* 3900* 4850* 4650 6800* 6800* 9500* 9500*
(10') (8600) (8600) (10700) (10200) (15000) (15000) (21900) (21900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-34
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4050 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (8900) (9800) (9800)
3.0 m 1550* 1550* 3500* 2600 4900* 3900 6000* 6000 9100* 9100*
(10') (3400) (3400) (7700) (5700) (10800) (8600) (13200) (13200) (20000) (20000)
1.5 m 1650* 1650* 4250* 2550 5500* 3700 7700* 5900
(5') (3600) (3600) (9300) (5600) (12100) (8100) (16900) (13000)
0.0 m 1900* 1900* 4250* 2540 6100* 3550 8900* 5650
(0') (4200) (4200) (9300) (5600) (13400) (7800) (19600) (12400)
1.5 m 2350* 2350* 6650* 3500 9350* 5550 8800* 8800*
(5') (5200) (5200) (14600) (7700) (20600) (12200) (19400) (19400)
3.0 m 6400* 3550 9000* 5600 13450* 11850
(10') (14100) (7800) (19800) (12300) (29600) (26100)
Front and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4150* 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (9100) (9800) (9800)
3.0 m 1550* 1550* 3500* 3400 4900* 4900* 6000* 6000* 9100* 9100*
(10') (3400) (3400) (7700) (7500) (10800) (10800) (13200) (13200) (20000) (20000)
1.5 m 1850* 1850* 4250* 3300 5500* 4850 7700* 7700*
(5') (4100) (4100) (9300) (7300) (12100) (10700) (16900) (16900)
0.0 m 1900* 1900* 4250* 3250 6100* 4700 8900* 7600 5750* 5750*
(0') (4200) (4200) (9300) (7100) (13400) (10300) (19600) (16700) (12600) (12600)
1.5 m 2350* 2350* 6650* 4650 9350* 7500 8800* 8800*
(5') (5200) (5200) (14600) (10200) (20600) (16500) (19400) (19400)
3.0 m 6400* 4700 9000* 7600 13450* 13450*
(10') (14100) (10300) (19800) (16700) (29600) (29600)
Rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4150* 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (9100) (9800) (9800)
3.0 m 1550* 1550* 3500* 3200 4900* 4800 6800* 6000 9100* 9100*
(10') (3400) (3400) (7700) (7040) (10800) (10600) (15000) (13200) (20000) (20000)
1.5 m 1650* 1650* 3950 3150 5500* 4600 7700* 7500
(5') (3600) (3600) (8700) (6900) (12100) (10100) (16900) (16500)
0.0 m 1900* 1900* 3900 3100 3650 4450 8900* 7200 5750* 5750*
(0') (4200) (4200) (8600) (6800) (8000) (9800) (19600) (15800) (12600) (12600)
1.5 m 2350* 2350* 5550 4400 9300 7100 8800* 8800*
(5') (5200) (5200) (12200) (9700) (20500) (15600) (19400) (19400)
3.0 m 5650 4450 9000* 7200 13450* 13450*
(10') (12400) (9800) (19800) (15800) (29600) (29600)
Blade above ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 2700
(20') (3400) (3400) (7700) (5900)
4.5 m 1500* 1500* 2250* 1650 4150* 2650 4450* 4400
(15') (3300) (3300) (4900) (3600) (9100) (5800) (9800) (9700)
3.0 m 1550* 1350 3500* 1600 4900* 2500 6000* 4050 9100* 7850
(10') (3400) (3000) (7700) (3500) (10800) (5500) (13200) (8900) (20000) (17300)
1.5 m 1650* 1300 3750 1550 5500* 2300 7700* 3650
(5') (3600) (2900) (8200) (3400) (12100) (5000) (16900) (8000)
0.0 m 1900* 1350 3700 1500 5400 2200 8900* 3450 5750* 5750*
(0') (4200) (3000) (8100) (3300) (11900) (4800) (19600) (7600) (12600) (12600)
1.5 m 2350* 1550 5300 2150 8900 3350 8800* 6500
(5') (5200) (3400) (11700) (4700) (19600) (7400) (19400) (14300)
3.0 m 5400 2200 8950 3400 13450* 6700
(10') (11900) (4800) (19700) (7500) (29600) (14700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-35
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions:Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground with rotating arm
7.5 m 1350* 1350*
(25') (3000) (3000)
6.0 m 1200* 1200* 2800* 2800*
(20') (2600) (2600) (6200) (6200)
4.5 m 1150* 1150* 1650* 1650* 3600* 3600*
(15') (2500) (2500) (3600) (3600) (7900) (7900)
3.0 m 1200* 1200* 2750* 2350 4300* 3600 5200* 5200* 7650* 7650*
(10') (2600) (2600) (6000) (5200) (9500) (7900) (11400) (11400) (16800) (16800)
1.5 m 1350* 1350* 3450* 2250 4950* 3300 6850* 5400 9100* 9100*
(5') (3000) (3000) (7600) (4900) (10900) (7300) (15100) (11900) (20000) (20000)
0.0 m 1600* 1600* 3400* 2150 5450* 3100 8050* 5000 7800* 7800*
(0') (3500) (3500) (7500) (4700) (12000) (6800) (17800) (11000) (17200) (17200)
1.5 m 2100* 2100* 6000* 3050 8650* 4850 9950* 9950*
(5') (4600) (4600) (13200) (6700) (19000) (10700) (21900) (21900)
3.0 m 3250* 2800 6650* 3100 8450* 4950 12850* 10650*
(10') (7100) (6200) (14600) (6800) (18600) (10900) (28300) (23400)
Front and rear outrigger on ground with rotating arm
7.5 m 1350* 1350*
(25') (3000) (3000)
6.0 m 1200* 1200* 2800* 2800*
(20') (2600) (2600) (6200) (6200)
4.5 m 1150* 1150* 1650* 1650* 3600* 3600*
(15') (2500) (2500) (3600) (3600) (7900) (7900)
3.0 m 1200* 1200* 2750* 2750* 4300* 4300* 5200* 5200* 7650* 7650*
(10') (2600) (2600) (6000) (6000) (9500) (9500) (11400) (11400) (16800) (16800)
1.5 m 1350* 1350* 3450* 3050 4950* 4450 6850* 6850* 9100* 9100*
(5') (3000) (3000) (7600) (6700) (10900) (9800) (15100) (15100) (20000) (20000)
0.0 m 1600* 1600* 3400* 2950 5450* 4250 8050* 6950 7800* 7800*
(0') (3500) (3500) (7500) (6500) (12000) (9300) (17800) (15300) (17200) (17200)
1.5 m 2100* 2100* 6000* 4150 8650* 6800 9950* 9950*
(5') (4600) (4600) (13200) (9100) (19000) (15000) (21900) (21900)
3.0 m 3250* 3250* 6050* 4250 8450 8900 12850* 12850*
(10') (7100) (7100) (13300) (9300) (18600) (19600) (28300) (28300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-36
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 1800 mm
7.5 m *4800 3900
6.0 m *4450 2600 *7450 3300
4.5 m *4450 2050 *4450 2020 7750 3200 *10150 5200 *15600 9950
3.0 m *4550 1800 5000 2000 7450 2950 *11400 4600
1.5 m *4400 1700 4900 1900 7100 2700 *11500 4100
0.0 m *4550 1750 4850 1850 6850 2500 *10350 3950
1.5 m *4750 1950 4850 1850 *6500 2500 *8450 3950 *8400 7700
3.0 m *3600 2550 *4100 2700 *5700 4150
Rear outrigger on ground Arm length 1800 mm
7.5 m *4800 4450
6.0 m *4450 3000 *7450 3850
4.5 m *4400 2400 *4450 2400 *7850 3700 *10150 6000 *15600 11800
3.0 m *4650 2150 5600 2350 *8250 3450 *11400 5400
1.5 m *4950 2000 5500 2250 8050 3200 *11500 4900
0.0 m *5100 2100 5400 2200 *7750 3000 *10350 4700
1.5 m *4750 2350 *6500 3000 *8450 4750 *8400 *8400
3.0 m *3600 3000 *4100 3200 *5700 4900
Front outrigger on ground and rear blade on ground Arm length 1800 mm
7.5 m *4850 *4850
6.0 m *4500 4000 *7600 5050
4.5 m *4500 3250 *4500 3250 7800 4900 *10300 8000 *15800 *15800
3.0 m 4700 2900 5150 3200 7550 4650 *11550 7300
1.5 m 4550 2800 5050 3100 7200 4350 *11700 6750
0.0 m 4700 2850 4950 3050 6950 4150 *10550 6600
1.5 m *4800 3200 *6600 4150 *8600 6600 *8550 *8550
3.0 m *3700 *3700 *4200 *4200 *5800 *5800
Front and rear outrigger on ground Arm length 1800 mm
7.5 m *4800 *4800
6.0 m *4450 *4450 *7450 6200
4.5 m *4400 4000 *4450 4000 *7850 6050 *10150 10000 *15600 *15600
3.0 m *4650 3600 6200 3950 *8250 5750 *11400 9250
1.5 m *5100 3500 6050 3850 *8350 5450 *11500 8650
0.0 m *5350 3600 *5750 3800 *7750 5250 *10350 8450
1.5 m *4750 4050 *6500 5250 *8450 *8450 *8400 *8400
3.0 m *3600 *3600 *4100 *4100 *5700 *5700
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-37
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
3F-38
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2400 mm
7.5 m *4250 3150 *5050 3400
6.0 m *4000 2250 *6800 3450
4.5 m *4050 1800 5200 2150 *7450 3300 *9450 5400
3.0 m 4100 1600 5050 2050 7550 3050 *10850 4750
1.5 m 3950 1500 4950 1900 7250 2800 *11650 4300
0.0 m 4050 1550 4800 1850 6900 2550 *11050 4050
1.5 m 4500 1700 4800 1800 6800 2450 *9500 3950 *9750 7650
3.0 m *3950 2100 *5300 2600 *7100 4050 *8200 7900
Rear outrigger on ground Arm length 2400 mm
7.5 m *4250 3650 *5050 3900
6.0 m *4000 2600 *6800 3950
4.5 m *4050 2150 5800 2500 *7450 3800 *9450 6250
3.0 m *4200 1900 5650 2400 *8050 3550 *10850 5550
1.5 m 4450 1800 5500 2300 8200 3300 *11650 5100
0.0 m 4550 1850 5400 2200 7850 3050 *11050 4800
1.5 m *4650 2050 *5150 2150 *7050 2950 *9500 4750 *9750 9350
3.0 m *3950 2500 *5300 3100 *7100 4850 *8200 *8200
Front outrigger on ground and rear blade on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 3500 *6900 5150
4.5 m *4100 2900 5300 3350 *7550 5000 *9600 8200
3.0 m 4200 2600 5200 3250 7650 4750 *11000 7450
1.5 m 4100 2500 5050 3100 7350 4450 *11850 7000
0.0 m 4200 2550 4950 3000 7000 4200 *11250 6700
1.5 m 4650 2800 4900 3000 6900 4100 *9650 6600 *9900 *9900
3.0 m *4000 3450 *5400 4250 *7200 6700 *8400 *8400
Front and rear outrigger on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 6300
4.5 m *4100 3600 5900 4100 *7550 6150 *9600 *9600
3.0 m *4300 3250 5800 4000 *8150 5850 *11000 9450
1.5 m 4550 3150 5650 3900 8250 5600 *11850 8900
0.0 m 4700 3200 5550 3800 7950 5300 *11250 8550
1.5 m *4750 3550 *5250 3750 *7200 5200 *9650 8500 *9900 *9900
3.0 m *4000 *4000 *5400 5350 *7200 *7200 *8400 *8400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-39
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
3F-40
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2900 mm
7.5 m *2650 2600 *4450 3500
6.0 m 2400 1900 *3850 2200 *5300 3500
4.5 m 2000 1550 5250 2150 *6600 3350
3.0 m 1800 1400 5100 2050 7650 3100 *10350 4950 *16700 9350
1.5 m 1750 1300 4950 1900 7300 2850 *11450 4400
0.0 m 1750 1350 4800 1800 6950 2550 *11350 4050 *5950 *5950
1.5 m 1900 1450 4750 1750 6750 2400 *10150 3900 *9200 7500
3.0 m 2250 1750 *4950 1800 *5950 2450 *8050 3950 *10200 7700
Rear outrigger on ground Arm length 2900 mm
7.5 m *2650 *2650 *4450 4050
6.0 m *2550 2250 *3850 2550 *5300 4000
4.5 m *2550 1650 *5300 2550 *6600 3850
3.0 m *2650 1450 5700 2400 *7750 3600 *10350 5800 *16700 11200
1.5 m *2900 1400 5550 2300 8250 3350 *11450 5200
0.0 m *3250 1400 5400 2150 7900 3050 *11350 4850 *5950 *5950
1.5 m *3900 1500 5300 2100 *7400 2900 *10150 4700 *9200 *9200
3.0 m *3900 1800 *3950 2150 *5950 2950 *8050 4750 *10200 9400
Front outrigger on ground and rear blade on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 3400 *5400 5250
4.5 m *2600 2550 5350 3350 *6700 5050
3.0 m *2700 2350 5200 3250 7700 4800 *10550 7750 *16950 15950
1.5 m *2950 2250 5050 3100 7400 4500 *11650 7100
0.0 m *3350 2300 4950 3000 7050 4200 *10550 6700 *6050 *6050
1.5 m *4050 2500 4850 2950 6850 4050 *10350 6550 *9300 *9300
3.0 m *5350 3150 *4000 2950 *6050 4100 *8200 6600 *10400 *10400
Front and rear outrigger on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4150 *6700 6200
3.0 m *2700 *2700 5800 4050 *7850 5950 *10550 9750 *16950 *16950
1.5 m *2950 2800 5650 3900 8300 5600 *11650 9050
0.0 m *3350 2900 5550 3750 8000 5300 *11550 8600 *6050 *6050
1.5 m *4050 3150 5450 3700 *7550 5150 *10350 8450 *9300 *9300
3.0 m *4000 3700 *4000 3750 *6050 5200 *8200 *8200 *10400 *10400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-41
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
3F-42
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 3500 mm
7.5 m *2650 2200 *2700 2200
6.0 m *2550 1650 *4150 2250
4.5 m *2550 1350 *4950 2250 *5400 3400
3.0 m *2650 1200 5100 2050 *7300 3150 *9600 5150
1.5 m *2900 1100 4950 1900 7350 2850 *11100 4500
0.0 m *3250 1150 4800 1750 7050 2600 *11450 4100 *6500 *6500
1.5 m 3550 1250 4700 1700 6700 2350 *10700 3850 *8750 7400
3.0 m *3900 1450 4650 1700 *6500 2350 *8950 3850 *12200 7500
Rear outrigger on ground Arm length 3500 mm
7.5 m *2650 2550 *2700 2600
6.0 m *2550 2100 *4150 2650
4.5 m *2550 1750 *4950 2550 *5400 3950
3.0 m *2650 1550 5750 2450 *7300 3650 *9600 6000
1.5 m *2850 1450 5550 2250 *8000 3350 *11100 5350
0.0 m *3200 1450 5350 2150 7950 3100 *11450 4850 *6500 *6500
1.5 m *3800 1600 5250 2050 7650 2850 *10700 4650 *8750 *8750
3.0 m *4900 1900 *4750 2050 *6550 2850 *8950 4600 *12200 9200
Front outrigger on ground and rear blade on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 3500
4.5 m *2600 2300 *5050 3400 *5500 5150
3.0 m *2700 2050 5250 3250 *7450 4850 *9750 7950
1.5 m *2950 2000 5050 3100 7450 4550 *11250 7250
0.0 m *3300 2000 4900 2950 7150 4300 *11650 6750 *6600 *6600
1.5 m 3650 2150 4800 2900 6850 4000 *10850 6500 *8900 *8900
3.0 m 3950 2550 4800 2850 *6650 4000 *9100 6500 *12400 *12400
Front and rear outrigger on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 *4200
4.5 m *2600 *2600 *5050 4200 *5500 *5500
3.0 m *2700 2650 5850 4050 *7450 6000 *9750 *9750
1.5 m *2950 2550 5650 3900 *8100 5650 *11250 9200
0.0 m *3300 2550 5500 3750 8050 5400 *11650 8650 *6600 *6600
1.5 m *3950 2750 5400 3650 7750 5100 *10850 8400 *8900 *8900
3.0 m *3950 3200 *4800 3650 *6650 5050 *9100 8350 *12400 *12400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-43
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
3F-44
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW210-1 (One piece boom)
Conditions:
Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
When outrigger retracted Arm length 2410 mm (7'11")
6.0 m 3200 2100 *3600 3000
(20') (7100) (4600) (8000) (6600)
4.5 m 2700 1700 2900 1850 *4100 2800
(15') (5900) (3700) (6400) (4100) (9100) (6200)
3.0 m 2450 1500 2800 1750 4050 2600 *6400 4000
(10') (5400) (3300) (6200) (3900) (9000) (5700) (14100) (8800)
1.5 m 2350 1450 2700 1650 3850 2350 5900 3550
(5') (5200) (3100) (6000) (3700) (8400) (5200) (13100) (7900)
0m 2450 1450 2650 1600 3700 2250 5700 3350 *5400 *5400
(0') (5400) (3200) (5800) (3500) (8100) (4900) (12600) (7400) (1200) (1200)
1.5 m 2750 1650 3650 2300 5650 3350 *9900 6300
(5') (6000) (3600) (8000) (4900) (12500) (7400) (21800) (13900)
3.0 m 3450 2100 3750 2300 5800 3450 *11900 6500
(10') (7600) (4700) (8200) (5000) (12800) (7600) (26300) (14400)
4.5 m 5650 3500 6150 3750
(15') (12500) (7700) (13600) (8300)
When outrigger expanded Arm length 2410 mm (7'11")
6.0 m *3350 2800 *3600 *3600
(20') (7400) (6200) (8000) (8000)
4.5 m *3400 2350 *3850 2500 *4100 3750
(15') (7500) (5100) (8500) (5600) (9100) (8300)
3.0 m *3550 2100 *4200 2400 *4850 3500 *6400 5400
(10') (7900) (4600) (9200) (5300) (10700) (7700) (14100) (12000)
1.5 m *3950 2000 *4550 2300 *5600 3250 *7800 4950
(5') (8700) (4500) (10100) (5100) (12300) (7200) (17200) (11000)
0m *4600 2100 *4850 2250 *6150 3150 *8550 4750 *5400 *5400
(0') (10100) (4600) (10700) (5000) (13500) (6900) (18900) (10500) (12000) (12000)
1.5 m *5000 2350 *6350 3100 *8700 4750 *9900 9250
(5') (11100) (5200) (14000) (6800) (19200) (10400) (21800) (20400)
3.0 m 5500 2950 *5950 3200 *8200 4850 *11900 9500
(10') (12100) (6500) (13100) (7000) (18100) (10700) (26300) (21000)
4.5 m *6000 4800 *6450 5150
(15') (13300) (10600) (14200) (11400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard No.J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-45
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 1800 mm
7.5 m *4800 4300
6.0 m 4150 2900 5200 3700
4.5 m 3350 2300 3350 2300 5050 3550 8200 5700 *16900 10850
3.0 m 3000 2050 3300 2250 4800 3350 7550 5100
1.5 m 2900 1950 3200 2200 4500 3050 7000 4650
0.0 m 3000 2000 3150 2100 4300 2850 6800 4450
1.5 m 3350 2250 4300 2850 6850 4500 *9300 8650
3.0 m *4050 2850 4500 3050 *6300 4650
Rear outrigger on ground Arm length 1800 mm
7.5 m *4800 *4800
6.0 m *4450 3750 *7700 4700
4.5 m *4400 3050 *4450 3050 *8550 4600 *11050 7350 *16900 14600
3.0 m *4650 2700 6300 3000 *9050 4350 *12400 6700
1.5 m *5100 2600 6150 2900 9000 4050 *12550 6200
0.0 m 5750 2700 6100 2850 *8500 3850 *11350 6000 *9300 *9300
1.5 m *5250 3000 *7150 3850 *9300 6050
3.0 m *4050 3800 *4600 4050 *6300 3200
Front outrigger on ground and rear blade on ground Arm length 1800 mm
7.5 m *4850 *4850
6.0 m *4500 *4500 *7850 5950
4.5 m *4500 3900 *4500 3900 8600 5800 *11200 9400 *17150 *17150
3.0 m *4700 3500 5700 3850 8350 5550 *12600 8700
1.5 m 5050 3400 5600 3750 8000 5250 *12750 8150
0.0 m 5250 3500 5550 3700 7750 5050 *11550 7950
1.5 m *5350 3900 *7250 5000 *9450 8000 *9500 *9500
3.0 m *4150 *4150 *4700 *4700 *6450 *6450
Front and rear outrigger on ground Arm length 1800 mm
*4850 *4850 *4850
6.0 m *4500 *4500 *7850 7100
4.5 m *4500 *4500 *4500 *4500 *8700 6950 *11200 *11200 *17150 *17150
3.0 m *4700 4250 6350 4650 *9200 6700 *12600 10750
1.5 m *5150 4100 6250 4550 9000 6400 *12750 10150
0.0 m 5850 4250 6200 4450 *8650 6150 *11550 9950
1.5 m *5350 4750 *7250 6150 *9450 *9450 *9500 *9500
3.0 m *4150 *4150 *4700 *4700 *6450 *6450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-46
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 1800 mm
7.5 m *5050 4900 *7000 6250
6.0 m *4550 3200 5250 3700 *7100 6300
4.5 m 3650 2500 5150 3600 *8450 5900 *12000 11450
3.0 m 3200 2150 3350 2250 4900 3400 7600 5100
1.5 m 3050 2050 3250 2150 4650 3150 7200 4750
0.0 m 3150 2100 3150 2100 4400 2950 6900 4500
1.5 m 3550 2350 4400 2900 6900 4450 *12050 8500
3.0 m 7050 4600
Rear outrigger on ground Arm length 1800 mm
7.5 m *5050 *5050 *7000 *7000
6.0 m *4550 4100 *6600 4750 *7100 *7100
4.5 m *4450 3300 *7050 4650 *8450 7600 *12000 *12000
3.0 m *4600 2900 *6150 3000 *7850 4400 *10300 6750
1.5 m *5050 2750 6300 2900 *8600 4150 *12000 6350
0.0 m *5800 2850 *6000 2850 *8900 3950 *12350 6100
1.5 m *6950 3200 *8550 3950 *11700 6050 *12050 *12050
3.0 m *9850 6250
Front outrigger on ground and rear blade on ground Arm length 1800 mm
7.5 m *5100 *5100 *7100 *7100
6.0 m *4600 *4600 *6700 6100 *7250 *7250
4.5 m *4500 4250 *7150 6000 *8600 *8600 *12150 *12150
3.0 m *4700 3800 *6250 3900 *8000 5700 *10450 8900
1.5 m *5100 3650 6200 3800 *8750 5450 *12200 8450
0.0 m *5900 3750 6100 3750 8750 5200 *12550 8200
1.5 m 6900 4200 *8700 5200 *11900 8150 *12250 *12250
3.0 m *10050 8350
Front and rear outrigger on ground Arm length 1800 mm
7.5 m *5100 *5100 *7100 *7100
6.0 m *4600 *4600 *6700 *6700 *7250 *7250
4.5 m *4500 *4500 *7150 *7150 *8600 *8600 *12150 *12150
3.0 m *4700 4500 *6250 4700 *8000 6850 *10450 *10450
1.5 m *5100 4350 6350 4600 *8750 6550 *12200 10400
0.0 m *5900 4500 *6100 4500 9000 6350 *12550 10100
1.5 m *7050 5050 *8700 6300 *11900 10100 *12250 *12250
3.0 m *10050 *10050
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-47
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2400 mm
7.5 m *4250 3500 *5050 3750
6.0 m 3600 2500 5300 3800
4.5 m 3000 2050 3450 2400 5150 3650 8450 5900
3.0 m 2700 1800 3350 2300 4900 3400 7700 5250
1.5 m 2600 1750 3250 2200 4650 3150 7200 4800
0.0 m 2650 1750 3150 2100 4350 2900 6900 4550
1.5 m 2950 1950 3100 2100 4250 2800 6850 4500 *9750 8550
3.0 m 3550 2400 4400 2950 6950 4600 *9100 8800
Rear outrigger on ground Arm length 2400 mm
7.5 m *4250 *4250 *5050 4800
6.0 m *4000 3250 *6800 4850
4.5 m *4050 2700 *6300 3150 *8100 4700 *9950 7550
3.0 m *4200 2450 6350 3050 *8800 4450 *11800 6850
1.5 m *4600 2350 6200 2900 9150 4150 *12700 6400
0.0 m 5150 2400 6100 2850 8800 2900 *12100 6100
1.5 m *5150 2650 *5700 2800 *7800 3800 *10450 6050 *9750 *9750
3.0 m *4350 3200 *5900 3950 *7800 6150 *9100 *9100
Front outrigger on ground and rear blade on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 6050
4.5 m *4100 3500 5900 4000 *8250 5900 *10100 9650
3.0 m *4300 3150 5750 3900 8450 5650 *12000 8900
1.5 m 4600 3050 5650 3750 8150 5350 *12900 8400
0.0 m 4700 3150 5550 3700 7800 5100 *12300 8050
1.5 m 5200 3450 5500 3650 7700 5000 *10600 8000 *9900 *9900
3.0 m *4450 4150 *6000 5150 *7950 *7950 *9300 *9300
Front and rear outrigger on ground Arm length 2400 mm
*4850 *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 *6900
4.5 m *4100 *4100 *6350 4800 *8250 7100 *10100 *10100
3.0 m *4300 3850 6400 4700 *8900 6800 *12000 *10950
1.5 m *4700 3700 6300 4550 9150 6500 *12900 10400
0.0 m 5250 2800 6150 4450 8800 6200 *12300 10050
1.5 m *5250 4200 *5800 4450 *7900 6100 *10600 10000 *9900 *9900
3.0 m *4450 *4450 *6000 *6000 *7950 *7950 *9300 *9300
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-48
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2400 mm
7.5 m *4400 3900
6.0 m 3900 2700 5450 3850
4.5 m 3200 2200 3500 2400 5300 3750 *7500 6100
3.0 m 2850 1900 3400 2300 5000 3500 8100 5500
1.5 m 2750 1800 3300 2200 4750 3200 7400 4950
0.0 m 2800 1850 3150 2100 4500 3000 7000 4600
1.5 m 3000 1950 3150 2050 4400 2900 6900 4500 *9150 8450
3.0 m 3850 2550 4450 2950 6950 4550 14550 8700
Rear outrigger on ground Arm length 2400 mm
7.5 m *4400 *4400
6.0 m *4100 3550 *5850 4900
4.5 m *4050 2900 *5550 3150 *6450 4800 *7500 *7500
3.0 m *4200 2600 *6250 3050 *7350 4550 *9550 7200
1.5 m *4550 2450 6300 2950 *8300 4250 *11450 6550
0.0 m *5200 2500 6200 2850 *8850 4000 *12350 6200
1.5 m 6100 2800 6150 2800 *8800 3900 *12150 6050 *10950 *10950
3.0 m *6600 3450 *7800 3950 *10850 6150 *15400 12250
Front outrigger on ground and rear blade on ground Arm length 2400 mm
7.5 m *4500 *4500
6.0 m *4150 *4150 *5950 *5950
4.5 m *4100 3750 *5600 4100 6550 6100 *7600 *7600
3.0 m *4250 3400 6350 4000 *7500 5850 *9750 9400
1.5 m *4600 3250 6200 3850 *8400 5550 *11650 8700
0.0 m *5250 3350 6100 3750 8850 5300 *12550 8300
1.5 m 6000 3700 6050 3700 8700 5150 *12350 8150 *11150 *11150
3.0 m *6700 4500 *7950 5250 *11050 8250 *15650 *15650
Front and rear outrigger on ground Arm length 2400 mm
7.5 m *4500 *4500
6.0 m *4150 *4150 *5950 *5950
4.5 m *4100 *4100 *5600 4850 *6550 *6550 *7600 *7600
3.0 m *4250 4050 *6350 4750 *7500 6950 *9750 *9750
1.5 m *4600 3900 6400 4650 *8400 6650 *11650 10650
0.0 m *5250 4000 6250 4500 *9000 6400 *12550 10250
1.5 m 6150 4450 6250 4500 8950 6300 *12350 10100 *11150 *11150
3.0 m *6700 5450 *7950 6350 *11000 10200 *15650 *15650
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-49
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2900 mm
7.5 m *2650 *2650 *4450 3850
6.0 m *2550 2200 3550 2450 *5300 3850
4.5 m *2550 1800 3500 2450 5200 3700
3.0 m 2450 1600 3350 2300 4950 3450 8000 5500 16400 10300
1.5 m 2350 1550 3250 2200 4650 3200 7350 4900
0.0 m 2400 1550 3100 2100 4400 2950 6950 4550 *5950 *5950
1.5 m 2600 1700 3050 2000 4200 2750 6800 4450 *9200 8450
3.0 m 3050 2050 3100 2050 4250 2800 6850 4450 *11250 8650
Rear outrigger on ground Arm length 2900 mm
7.5 m *2650 *2650 *4450 *4450
6.0 m *2550 *2550 *3850 3200 *5300 4900
4.5 m *2550 2400 *5300 3150 *6600 4750
3.0 m *2650 2200 6350 3050 *8450 4500 *11300 7150 *18150 13950
1.5 m *2900 2100 6200 2900 9000 4200 *12500 6500
0.0 m *3300 2150 6050 2800 8850 3950 *12400 6150 *5950 *5950
1.5 m *4000 2350 6000 2750 8150 3750 *11150 6000 *9200 *9200
3.0 m *4350 2750 *4400 2800 *6600 3800 *8850 6050 *11250 *11250
Front outrigger on ground and rear blade on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4050 *6700 5950
3.0 m *2700 *2700 5800 3900 8500 5700 *11450 9150 *18400 *18400
1.5 m *2950 2750 5650 3750 8200 5400 *12700 8500
0.0 m *3350 2800 5500 3650 7850 5100 *12600 8100 *6050 *6050
1.5 m *4050 3050 5450 3600 7650 4950 *11300 7950 *9300 *9300
3.0 m *4450 3600 *4500 3600 *6700 5000 *9000 8000 *11450 *11450
Front and rear outrigger on ground Arm length 2900 mm
*4850 *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4400 *6700 6600
3.0 m *2700 *2700 5950 4300 *8500 6300 *11300 10400 *18150 *18150
1.5 m *2950 *2950 5800 4150 8500 6000 *12650 9700
0.0 m *3350 3100 5650 4050 8150 5700 *12650 9250 *6050 *6050
1.5 m *4050 3350 5600 4950 7950 5500 *11500 9100 *9300 *9300
3.0 m *4600 4000 *4650 4000 *6900 5550 *9300 9150 *11450 *11450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-50
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 2900 mm
7.5 m *2800 *2800 *4150 3900
6.0 m *2600 2350 *3200 2500 *5150 3950
4.5 m *2550 1900 3550 2450 5400 3800 *6300 6300
3.0 m 2550 1700 3450 2350 5100 3550 8300 5700 *13450 10900
1.5 m 2450 1600 3300 2200 4750 3250 7550 5050 *6350 *6350
0.0 m 2500 1600 3150 2100 4500 3000 7050 4600 *6950 *6950
1.5 m 2750 1750 3100 2000 4350 2850 6850 4450 *10200 8400
3.0 m 3250 2150 4350 2850 6850 4450 14350 8550
Rear outrigger on ground Arm length 2900 mm
7.5 m *2800 *2800 *4150 *4150
6.0 m *2600 *2600 *3200 *3200 *5150 5000
4.5 m *2550 *2550 *4950 3200 *5850 4850 *6300 *6300
3.0 m *2650 2300 *5900 3100 *6850 4600 *8700 7400 *13450 *13450
1.5 m *2900 2200 6350 2950 *7900 4300 *10850 6700 *6350 *6350
0.0 m *3250 2250 6200 2800 *8650 4050 *12100 6250 *6950 *6950
1.5 m *3950 2450 6100 2750 *8800 3850 *12250 6050 *10200 *10200
3.0 m *5250 2950 *8250 3900 *11400 6050 *15250 12100
Front outrigger on ground and rear blade on ground Arm length 2900 mm
7.5 m *2850 *2850 *4250 *4250
6.0 m *2650 *2650 *3250 *3250 *5250 *5250
4.5 m *2600 *2600 *5000 4150 *5950 *5950 *6400 *6400
3.0 m *2700 *2700 *6000 4000 *6950 *5900 *8850 *8850 *13700 *13700
1.5 m *2950 *2950 6250 3850 *8050 5600 *11000 8850 *6450 *6450
0.0 m *3350 3000 6100 3750 *8800 5300 *12300 8350 *7050 *7050
1.5 m *4000 3250 6000 3650 8650 5150 *12450 8150 *10350 *10350
3.0 m *5350 3150 *8400 5150 *11600 8150 *15450 *15450
Front and rear outrigger on ground Arm length 2900 mm
7.5 m *2850 *2850 *4250 *4250
6.0 m *2650 *2650 *3250 *3250 *5250 *5250
4.5 m *2600 *2600 *5000 4500 *5950 *5950 *6400 *6400
3.0 m *2700 *2700 *6000 4400 *6950 6500 *8850 *8850 *13700 *13700
1.5 m *2950 *2950 5900 4250 *8050 6150 *11000 10000 *6450 *6450
0.0 m *3350 3250 5750 4100 8400 5850 *12300 9450 *7050 *7050
1.5 m *4000 3550 5700 4000 8200 5700 *12450 9200 *10350 *10350
3.0 m *5350 4250 8250 5700 *11600 9200 *15450 *15450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-51
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 3500 mm
7.5 m *2650 2450 *2700 2500
6.0 m *2550 1900 3600 2550
4.5 m 2400 1600 2450 1600 3550 2450 5300 3800
3.0 m 2150 1400 2400 1550 3400 2350 5000 3500 8200 5650
1.5 m 2100 1350 2300 1500 3250 2200 4700 3200 7500 5050
0.0 m 2100 1350 2250 1450 3100 2050 4450 2950 7000 4600 *6500 *6500
1.5 m 2250 1450 3000 1950 4150 2750 6750 4400 *8750 8300
3.0 m 2650 1700 3000 1950 4150 2700 6700 4350 *12350 8400
Rear outrigger on ground Arm length 3500 mm
7.5 m *2650 *2650 *2700 *2700
6.0 m *2550 2500 *4150 3300
4.5 m *2550 2150 *2850 2200 *4950 3200 *5400 4800
3.0 m *2650 1950 *3950 2150 *6200 3050 *7750 4550 *10450 7300
1.5 m *2900 1850 4500 2100 6200 2900 *8750 4250 *12150 6650
0.0 m *3250 1900 4450 2000 6050 2800 8900 3950 *12550 6150 *6500 *6500
1.5 m *3900 2050 5950 2700 *8450 3700 *11700 5950 *8750 *8750
3.0 m *4300 2350 *5250 2650 *7200 3700 *9850 5950 *12350 11900
Front outrigger on ground and rear blade on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 4150
4.5 m *2600 *2600 *2900 2850 *5050 4050 *5500 *5500
3.0 m *2700 2550 *4000 2800 5800 3950 *7900 5750 *10600 9400
1.5 m *2950 2450 4150 2750 5650 3750 8250 5450 *12300 8650
0.0 m *3300 2500 4050 2650 5500 3600 7950 5150 *12750 8150 *6600 *6600
1.5 m *3950 2700 5400 3550 7600 4900 *11900 7900 *8900 *8900
3.0 m *4400 3100 *5350 3500 *7350 4850 *10000 7900 *12550 *12550
Front and rear outrigger on ground Arm length 3500 mm
*4850 *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 *4200
4.5 m *2600 *2600 *2900 *2900 *5050 4900 *5500 *5500
3.0 m *2700 *2700 *4000 3400 *6300 4750 *7900 6950 *10600 *10600
1.5 m *2950 *2950 4600 3350 6300 4550 *8900 6600 *12300 10700
0.0 m *3300 3100 4500 3250 6150 4400 8950 6300 *12750 10150 *6600 *6600
1.5 m *3950 3300 6050 4300 *8600 6050 *11900 9900 *8900 *8900
3.0 m *4400 3800 *5350 6400 *7350 6000 *10000 9850 *12550 *12550
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-52
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without outrigger Arm length 3500 mm
7.5 m *2700 2700
6.0 m *2550 2050 3650 2550 *4500 4050
4.5 m 2550 1700 3600 2500 *5100 3900
3.0 m 2300 1500 2400 1550 3450 2400 5200 3600 *7650 5900 *10850 *10850
1.5 m 2200 1400 2350 1500 3300 2200 4850 3300 4650 5150
0.0 m 2200 1400 2250 1450 3150 2050 4500 3000 7150 4700 *7600 *7600
1.5 m 2400 1500 3000 1950 4300 2850 6850 4400 *9700 8300
3.0 m 2800 1800 3000 1950 4250 2750 6750 4350 *13700 8350
Rear outrigger on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2550 *2550 *3950 3350 *4500 *4500
4.5 m *2550 2300 *4750 3250 *5100 4950
3.0 m *2650 2050 *3350 2150 *5450 3150 *6250 4700 *7650 7600 *10850 *10850
1.5 m *2850 1950 *3950 2100 *6050 2950 *7400 4350 *9900 6800
0.0 m *3200 2000 *3650 2000 6200 2800 *8300 4050 *11650 6300 *7600 *7600
1.5 m *3800 2150 6050 2700 *8750 3850 *12200 6000 *9750 *9750
3.0 m *4900 2500 6050 2700 *8500 3850 *11800 5950 *13700 11850
Front outrigger on ground and rear blade on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2600 *2600 *4000 *4000 *4550 *4550
4.5 m *2600 *2600 *4850 4200 *5200 *5200
3.0 m *2700 *2700 *3400 2850 *5550 4050 *6350 6000 *7750 *7750 *11050 *11050
1.5 m *2900 2650 *4000 2800 *6150 3900 *7500 5650 *10100 8950
0.0 m *3250 2650 *3700 2700 6100 3700 *8450 5350 *11800 8450 *7700 *7700
1.5 m *3850 2850 5950 3600 8650 5100 *12450 8100 *9850 *9850
3.0 m *5000 3350 5950 3600 8600 5050 *12000 8050 *13900 *13900
Front and rear outrigger on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2600 *2600 *4000 *4000 *4550 *4550
4.5 m *2600 *2600 *4850 *4850 *5200 *5200
3.0 m *2700 *2700 *3400 *3400 *5500 4850 *6350 *6350 *7750 *7750 *11050 *11050
1.5 m *2900 *2900 *4000 3350 *6150 4650 *7500 6750 *10100 *10100
0.0 m *3250 *3250 *3700 3300 6250 4500 *8450 6450 *11800 10400 *7700 *7700
1.5 m *3850 3500 6150 4350 8900 6250 *12450 10050 *9850 *9850
3.0 m *5000 4050 6100 4350 *8650 6150 *12000 9950 *13900 *13900
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
3F-53
MEMO
CONTENTS
INDEX
SECTION 4
WHEEL LOADERS Sec 4A
REACH LOADERS Sec 4B
WHEEL DOZERS Sec 4C
TRASH COMPACTORS & Sec 4D
TRASH LOADERS
TOWING TRACTORS Sec 4E
SECTION 4A
WHEEL LOADERS
CONTENTS
Features .................................................................... 4A-2
Specifications ........................................................... 4A-8
Performance data, dimensions ............................. 4A-17
Performance curves, travel time charts ............... 4A-99
Definitions ............................................................ 4A-106
Attachment availability ........................................ 4A-109
Bucket features .................................................... 4A-114
Teeth features ....................................................... 4A-115
Hensley teeth / machine guide ........................... 4A-116
Bucket selection .................................................. 4A-119
Multi-purpose bucket specifications .................. 4A-131
Fork equipment features ..................................... 4A-132
Log-loader operations ......................................... 4A-134
Lumber grapple specifications ........................... 4A-135
Dumping fork specifications ............................... 4A-136
Lumber fork specifications ................................. 4A-137
Log grapple specifications ................................. 4A-138
Logger performance ............................................ 4A-140
High lift boom specifications .............................. 4A-146
Tire availability ..................................................... 4A-147
Wheel loader and dump truck combination ......... 4A-150
Production ............................................................ 4A-154
4A-1
Features WHEEL LOADERS
AVANCE Series
! Excellent productivity
Dual hydraulic speed system to reduce cycle time
(WA320-WA900, except WA320-3 CUSTOM, FAST
WA800-3)
VOHS (Variable Output Hydraulic System) to
reduce cycle time (WA1200) SLOW
High capacity engine with power to spare
The powerful Komatsu engine provides fuel-
efficient operation.
FLW00001
4A-2
Features WHEEL LOADERS
AVANCE Series
! Easy maintenance and safety
Gull-wing type side cover
Gull-wing engine side covers facilitate engine
access for easy check/replacement of engine oil
or filters. (WA120-WA470 )
Full-opening rear grill
Fully opening rear grill makes it possible to check
the battery and clean the radiator easily. (WA120-
FLW00008
WA250)
FLW00052
Disc
(wet type multiple disc)
4A-3
Features WHEEL LOADERS
AVANCE Series
! Dependable and high-performance
components
High-rigidity frames
Front and rear frames are made as one larger
loader class to provide high rigidity for the power
train and loader equipment.
The high-rigidity frames, together with the
reinforced loader linkage for resist loading stress
and shock.
Accumulator
Two independent fully hydraulic brake lines are Brake
used for the brake control system.
Accumulator
charging valve
High-quality paint
Most exterior plates are treated with a cation
electro-deposition undercoat and melamine
baked final paint for rust resistance and longer To PPC valve
service life. Hydraulic pump Brake
In addition, some exterior components employ FLW00012
resin.
4A-4
Features WHEEL LOADERS
GALEO Series
! High productivity and low fuel
consumption
Dual-mode select system
This wheel loader offers two selectable
operating modes-Normal and Power.
Normal mode: This mode provides
maximum fuel efficiency for most of general
loading.
Power mode: This mode provides
maximum power output for hard digging
operation or hill climb.
Transmission mode select system
This operator controlled system allows the
operator to select manual shifting or three levels
of automatic shifting (low, medium, and high).
New dual-speed hydraulic system
Komatsu's dual-speed hydraulic system
increases operational efficiency by matching the
hydraulic demands to work conditions.
! Increased reliability
Wet multi-disc brakes and fully hydraulic
braking system mean lower maintenance costs
and higher reliability. Wet disc brakes are fully
sealed. Contaminants are kept out, reducing wear
and resulting maintenance.
Brakes require no adjustments for wear, meaning
even lower maintenance. The new parking brake
is also an adjustment-free, wet multi-disc for high
reliability and long life.
4A-5
Features WHEEL LOADERS
GALEO Series
Hi-rigidity frames
The front and rear frames have high rigidity to
bear twisting and bending loads applied
repeatedly to the loader body.
Flat face-to-face O-ring seals nipple
buffer rings
dust seal
rod packing
Komatsu components
Komatsu manufactures the engine, torque Torque converter
converter, transmission, hydraulic units, electric
parts, and even each bolt on this wheel loader.
Cathion Electrodeposition primer paint/
powder coating final paint
Cathion electrodeposition paint is applied as a
primer paint and powder coating is applied as
topcoat to the exterior metal sheet parts. Transmission Engine
Front axle Rear axle
Sealed DT connectors
Main harnesses and controller connectors are
equipped with sealed DT connectors providing
high reliability, water resistance and dust
resistance.
FVW00925
4A-6
Features WHEEL LOADERS
GALEO Series
! Easy & comfortable operation
Automatic transmission with ECMV
Kick-down switch
With the touch of a finger, the kick-down switch
automatically down shifts from second to first
when beginning the digging cycle. Transmission controller
FZW00949
Low-noise design
The large cab is mounted with Komatsu's unique
ROPS/FOPS viscous mounts. The low-noise Floor
engine, hydraulically driven fan, and hydraulic
pumps are mounted with rubber cushions, and Rubber
the cab sealing is improved to provide a quiet,
low-vibration, dustproof with pressurizing, and Frame
comfortable operating environment.
4A-7
Specifications WHEEL LOADERS
Model
WA180-3 WA180PT-3 WA250-3 WA250PT-3
Item
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 110 (82)/2400 110 (82)/2400 130 (97)/2400 130 (97)/2400
DIN PS (kW)/rpm 112 (82)/2400 112 (82)/2400 132 (97)/2400 132 (97)/2400
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.2 (4.5) 7.2 (4.5) 7.8 (4.8) 8.5 (5.3)
2nd 12.0 (7.5) 12.0 (7.5) 12.0 (7.5) 12.5 (7.8)
3rd 22.0 (13.7) 22.0 (13.7) 21.2 (13.2) 23.5 (14.6)
4th 34.5 (21.4) 34.5 (21.4) 34.5 (21.4) 38.0 (23.6)
Reverse 1st 7.7 (4.8) 7.7 (4.8) 8.1 (5.0) 8.5 (5.3)
2nd 12.6 (7.8) 12.6 (7.8) 12.3 (7.6) 13.0 (8.1)
3rd 22.9 (14.2) 22.9 (14.2) 21.8 (13.5) 24.0 (14.9)
4th 35.0 (21.7) 35.0 (21.7) 35.0 (21.7) 39.0 (24.2)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D102E S6D102E S6D102E S6D102E
No. of cylinders- mm (in) 6-102 120 6-102 120 6-102 120 6-102 120
bore stroke (4.0 4.7) (4.0 4.7) (4.0 4.7) (4.0 4.7)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.90 (359)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 170 (44.9) 170 (44.9) 184 (48.7) 184 (48.6)
* See PERFORMANCE DATA
4A-8
Specifications WHEEL LOADERS
Model WA320-3
WA320-3 WA380-5 WA380-3
Item CUSTOM
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 163 (121)/2380 153 (114)/2350 187 (140)/2000 187 (140)/2200
DIN PS (kW)/rpm 165 (121)/2380 155 (114)/2350 190 (140)/2000 190 (140)/2200
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.5 (4.7) 7.5 (4.7) 6.3 (3.9) 7.1 (4.4)
2nd 12.0 (7.5) 12.0 (7.5) 11.4 (7.1) 11.4 (7.1)
3rd 21.0 (13.0) 21.0 (13.0) 20.2 (12.6) 20.2 (12.6)
4th 34.0 (21.1) 34.0 (21.1) 31.5 (19.6) 31.5 (19.6)
Reverse 1st 7.8 (4.8) 7.8 (4.8) 6.7 (4.2) 7.4 (4.6)
2nd 12.5 (7.8) 12.5 (7.8) 11.8 (7.3) 11.8 (7.3)
3rd 22.0 (13.7) 22.0 (13.7) 21.0 (13.0) 21.0 (13.0)
4th 35.0 (21.7) 35.0 (21.7) 32.5 (20.2) 32.5 (20.2)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D108 SA6D102E SAA6D114E S6D108
No. of cylinders- mm (in) 6-108 130 6-102 120 6-114 135 6-108 130
bore stroke (4.3 5.1) (4.0 4.7) (4.49 5.31) (4.3 5.1)
Piston displacement ltr. (cu.in) 7.15 (436) 5.88 (359) 8.27 (505) 7.15 (436)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 221 (58.4) 200 (52.8) 300 (79.3) 287 (75.8)
Model
Item WA420-3 WA430-5 WA470-5 WA470-3
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 217 (162)/2200 217 (162)/2000 261 (195)/2000 260 (194)/2200
DIN PS (kW)/rpm 220 (162)/2200 220 (162)/2000 265 (195)/2000 263 (194)/2200
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.3 (3.9) 6.6 (4.1) 5.8 (3.6) 6.2 (3.9)
2nd 11.7 (7.3) 11.5 (7.1) 11.2 (7.0) 11.2 (7.0)
3rd 20.5 (12.7) 20.4 (12.7) 20.2 (12.6) 19.8 (12.3)
4th 32.8 (20.4) 33.2 (20.6) 33.1 (20.6) 31.5 (19.6)
Reverse 1st 6.6 (4.1) 7.1 (4.4) 6.1 (3.8) 6.4 (4.0)
2nd 12.2 (7.6) 12.3 (7.6) 11.9 (7.4) 11.7 (7.3)
3rd 21.2 (13.2) 21.6 (13.4) 21.4 (13.3) 20.7 (12.9)
4th 33.9 (21.1) 34.9 (21.7) 34.7 (21.6) 32.7 (20.3)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D108 SAA6D125E SAA6D125E S6D125
No. of cylinders- mm (in) 6-108 130 6-125 x 150 6-125 150 6-125 150
bore stroke (4.3 5.1) (4.92 x 5.91) (4.9 5.9) (4.9 5.9)
Piston displacement ltr. (cu.in) 7.15 (436) 11.04 (674) 11.04 (674) 11.04 (674)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 320 (84.5) 343 (90.6) 390 (103.0) 400 (105.7)
* See PERFORMANCE DATA
4A-9
Specifications WHEEL LOADERS
4A-10
Specifications WHEEL LOADERS
4A-11
Specifications WHEEL LOADERS
Model
Item WA380-5*4 WA420-3*4 WA450-5*4 WA480-5*4
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 187 (140)/2000 215 (160)/2200 261 (195)/2000 271 (202)/2000
DIN PS (kW)/rpm 190 (140)/2000 218 (160)/2200 265 (195)/2000 275 (202)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.8 (4.2) 6.8 (4.2) 6.3 (3.9) 6.3 (3.9)
2nd 12.3 (7.6) 12.7 (7.9) 12.1 (7.5) 12.1 (7.5)
3rd 21.4 (13.3) 22.1 (13.7) 21.7 (13.5) 21.6 (13.4)
4th 34.0 (21.1) 34.5 (21.4) 34.9 (21.7) 34.3 (21.3)
Reverse 1st 7.3 (4.5) 7.1 (4.4) 6.7 (4.2) 6.6 (4.1)
2nd 12.8 (8.0) 13.2 (8.2) 12.8 (8.0) 12.8 (8.0)
3rd 22.6 (14.0) 22.9 (14.2) 23.0 (14.3) 22.8 (14.2)
4th 35.0 (21.7) 36.0 (22.4) 36.0 (2.4) 35.8 (22.2)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E SAA6D114E SAA6D125E SAA6D125E
No. of cylinders- mm (in) 6-114 135 6-114 135 6-125 150 6-125 150
bore stroke (4.5 5.3) (4.5 5.3) (4.9 5.9) (4.9 5.9)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 11.04 (674) 11.04 (674)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 300 (79.3) 340 (89.8) 390 (103) 417 (110.2)
* See PERFORMANCE DATA
*4 Canada source
*5 USA source
4A-12
Specifications WHEEL LOADERS
Model
WA500-3*5 WA600-3*5 WA700-3*5 WA800-3*5
Item
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 315 (235)/2100 450 (336)/2000 641(478)/2000 808 (603)/2000
DIN PS (kW)/rpm 319 (235)/2100 456 (336)/2000 650(478)/2000 819 (603)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.1 (4.4) 6.4 (4.0) 6.4 (4.0) 7.0 (4.3)
2nd 12.6 (7.8) 11.0 (6.8) 11.1 (6.9) 12.3 (7.6)
3rd 21.2 (13.2) 18.8 (11.7) 18.7 (11.6) 28.0 (17.4)
4th 34.8 (21.6) 30.3 (18.8) 30.0(18.6)
Reverse 1st 7.9 (4.9) 7.1 (4.4) 7.1 (4.4) 7.1 (4.4)
2nd 14.1 (8.6) 12.2 (7.6) 12.2 (7.6) 12.4 (7.7)
3rd 23.5 (14.6) 20.5 (12.7) 20.5 (12.7) 28.3 (17.6)
4th 38.1 (23.7) 32.7 (20.3) 32.3 (20.1)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D140E SAA6D170E SAA6D170E SAA12V140ZE
No. of cylinders- mm (in) 6-140 x 165 6-170 x 170 6-170 170 12-140 165
bore stroke (5.5 x 6.5) (6.7 x 6.7) (6.7 6.7) (5.51 6.5)
Piston displacement ltr. (cu.in) 14 (855) 23.15 (1,410) 23.15 (1,412) 30.5 (1,861)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 448 (118.4) 670 (177) 1100 (290.6) 1425 (376.5)
Model
Item WA900-3*5
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 853 (637)/2000
DIN PS (kW)/rpm 865 (637)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.0 (4.3)
2nd 12.3 (7.6)
3rd 28.0 (17.4)
4th
Reverse 1st 7.1 (4.4)
2nd 12.4 (7.7)
3rd 28.3 (17.6)
4th
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU
SA12V140ZE
No. of cylinders- mm (in) 12-140 165
bore stroke (5.51 6.5)
Piston displacement ltr. (cu.in) 30.5 (1,861)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 1425 (376.5)
* See PERFORMANCE DATA
*4 Canada source
*5 USA source
4A-13
Specifications WHEEL LOADERS
Model
WA95-3*6 WA115-3*6 WA250-5*6 WA320-3*6
Item
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 74 (55)/2500 87 (65)/2200 137 (102)/2000 166 (124)/2350
DIN PS (kW)/rpm 75 (55)/2500 88 (65)/2200 139 (102)/2000 168 (124)/2350
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 5.7 (3.5) 7.0 (4.3) 4.0~13.0 (2.5~8.1) 7.4 (4.6)
2nd 20.0 (12.4) 20.0 (12.4) 13.0 (8.1) 11.6 (7.2)
3rd 18.0 (11.2) 20.9 (13)
4th 38.0 (23.6) 37.6 (23.3)
Reverse 1st 5.7 (3.5) 7.0 (4.3) 4.0~13.0 (2.5~8.1) 7.8 (4.8)
2nd 20.0 (12.4) 20.0 (12.4) 13.0 (8.1) 12.3 (7.6)
3rd 18.0 (11.2) 22.9 (14.2)
4th 38.0 (23.6) 39.3 (24.4)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 38.5 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
4D106E S4D106E SAA6D102E S6D114E
No. of cylinders- mm (in) 4-106 125 4-106 x 125 6-102 x 120 6-114 135
bore stroke (4.17 4.92) (4.17 x 4.92) (4.0 x 4.7) (4.49 5.31)
Piston displacement ltr. (cu.in) 4.412 (269) 4.412 (269) 5.9 (360) 8.27 (505)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 130 (33.8) 120 (31.7) 184 (48.6) 221 (58.4)
* See PERFORMANCE DATA
*6 Germany source
4A-14
Specifications WHEEL LOADERS
Model
WA380-5*6 WA400-5*6 WA470-5*6 WA480-5*6
Item
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 187 (140)/2000 206 (154)/2000 261 (195)/2000 271 (202)/2000
DIN PS (kW)/rpm 190 (140)/2000 209 (154)/2000 265 (195)/2000 275 (202)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.8 (4.2) 6.8 (4.2) 6.3 (3.9) 6.3 (3.9)
2nd 12.3 (7.6) 12.4 (7.7) 12.1 (7.5) 12.1 (7.5)
3rd 22.6 (14.0) 22.7 (14.1) 22.8 (14.2) 22.6 (14.0)
4th 38.3 (23.9) 38.5 (23.9) 39.7 (24.7) 39.6 (24.6)
Reverse 1st 7.3 (4.5) 7.3 (4.5) 6.7 (4.2) 6.6 (4.1)
2nd 12.8 (8.0) 12.9 (8.0) 12.8 (8.0) 12.8 (8.0)
3rd 23.9 (14.9) 24.0 (14.9) 24.7 (15.3) 23.8 (14.8)
4th 39.5 (24.5) 39.6 (24.6) 40.9 (25.4) 41.3 (25.7)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E SAA6D114E SAA6D125E SAA6D125E
No. of cylinders- mm (in) 6-114 135 6-114 x 135 6-125 x 150 6-125 x 150
bore stroke (4.49 5.31) (4.49 x 5.31) (4.92 x 5.91) (4.92 x 5.91)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 11.04 (674) 11.4 (674)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 300 (79.3) 300 (79.3) 390 (103.0) 417 (110.2)
Model
Item WA500-3*6
OPERATING WEIGHT* kg (lb)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 315 (235)/2100
DIN PS (kW)/rpm 320 (235)/2100
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.1 (4.4)
2nd 12.6 (7.8)
3rd 21.2 (13.2)
4th 34.8 (21.6)
Reverse 1st 7.9 (4.9)
2nd 14.1 (8.8)
3rd 23.5 (14.6)
4th 38.1 (23.7)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU
SA6D140E
No. of cylinders- mm (in) 6-140 x 165
bore stroke (5.51 x 6.5)
Piston displacement ltr. (cu.in) 15.24 (930)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 460 (121.5)
* See PERFORMANCE DATA
*6 Germany source
*7 China source
4A-15
Specifications WHEEL LOADERS
4A-16
Performance Data WHEEL LOADERS
Dimensions
WA30-5
Capacity Struck Bucket Breakout
Heaped m3 width mm force
m3(cu.yd) (cu.yd) (ft.in) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
0.4 0.3 1575 2700
(Loading and excavating of soil, sand and variety of (0.52) (0.39) (5'2") (5950)
other commonly handled materials.)
Operating weight
kg (lb)
Tires/Bucket I
2575
12.5/70-16-6PR(L-2)
(5680)
Unit: mm (ft.in)
Tires 12.5/70-16PR(L-2)
Tread 1180 (3'10")
45 Width over tires 1945 (5'9")
K J A Wheelbase 1750 (5'9")
B B Hinge pin height, max. height 2680 (8'10")
F
H C Hinge pin height, carry position
D Ground clearance 270 (10.6")
47
C D
E E Hitch height 750 (2'6")
10 F Overall height, ROPS canopy 2700 (8'10")
A
L
FVBH0007
4A-17
Performance Data WHEEL LOADERS
Dimensions
WA50-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width mm weight force
m3(cu.yd) (cu.yd) (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
0.6 0.5 1690 215 3050
(Loading and excavating of soil, sand and variety of
(0.78) (0.65) (5'7") (474) (6720)
other commonly handled materials.)
Operating weight
kg (lb)
Tires/Bucket I
15.5/70-18-8PR(L-2) 3475
(7660)
Unit: mm (ft.in)
Tires 15.5/70-18PR(L-2)
Tread 1250 (4'1")
45 Width over tires 1655 (5'5")
K J A Wheelbase 1850 (6'1")
B B Hinge pin height, max. height 3115 (10'3")
F
H C Hinge pin height, carry position
D Ground clearance 310 (1'0")
47
C D
E E Hitch height 790 (2'7")
10 F Overall height, ROPS canopy 2720 (8'11")
A
L
FVBH0007
4A-18
Performance Data WHEEL LOADERS
Dimensions
WA80-3
Capacity Struck Bucket Breakout
Heaped m3 width mm force
m3(cu.yd) (cu.yd) (ft.in) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
0.9 0.7 1980 4200
(Loading and excavating of soil, sand and variety of (1.18) (0.92) (6'6") (9260)
other commonly handled materials.)
Operating weight
kg (lb)
Tires/Bucket I
4575
17.5/65-20-10PR(L-2)
(10090)
Unit: mm (ft.in)
Tires 17.5/65-20-10PR(L-2)
Tread 1470 (4'10")
45 Width over tires 1910 (6'3")
K J A Wheelbase 2250 (7'5")
B B Hinge pin height, max. height 3105 (10'2")
F
H C Hinge pin height, carry position 390 (1'3")
D Ground clearance 330 (1'1")
47
C D
E E Hitch height 665 (2'2")
10 F Overall height, ROPS canopy 2800 (9'4")
A
L
FVBH0007
4A-19
Performance Data WHEEL LOADERS
Dimensions
WA120-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
1.4 1.2 2390 600 6120
(Loading and excavating of soil, sand and variety of
(1.85) (1.55) (7'10") (1320) (13490)
other commonly handled materials.)
1.3 1.1 2390 550 6680
II General-purpose bucket with teeth
(1.7) (0.45) (7'10") (1210) (14730)
1.2 1.0 2390 570 6470
III Excavating bucket with bolt-on cutting edges
(1.55) (1.3) (7'10") (1260) (14260)
IV Excavating bucket with teeth (Loading and 1.2 1.0 2390 515 7060
excavating of crushed rock and blasted rock.) (1.55) (1.3) (7'10") (1135) (15560)
V Light material bucket with bolt-on cutting edges; 1.7 1.5 2390 665 5220
(A Lighter-weight, large-capacity bucket.) (2.25) (1.95) (7'10") (1465) (11510)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 500 (1100) 470 (1040) 410 (900)
Install ROPS canopy 320 kg (710 lb) 180 (400) 170 (370) 150 (330)
Install steel cab 310 kg (680 lb) 190 (420) 180 (400) 160 (350)
Install additional counterweight +280 (+620) +530 (+1170) +460 (+1010)
4A-20
Performance Data WHEEL LOADERS
Dimensions
WA120-3
Unit: mm (ft.in)
16.9-24 14.00-24 15.5-25
and 17.5-25
tires tires tires
Tread 1780 (5'10") 1780 (5'10") 1780 (5'10")
Width over tires 2250 (7'5") 2185 (7'2") 2180 (7'2")
45 2225 (7'4")
K
J A Wheelbase 2600 (8'6") 2600 (8'6") 2600 (8'6")
B
F G B Hinge pin height, max.
H
height 3450 (11'4") 3475 (11'5) 3440 (11'3")
48
E C Hinge pin height, carry
C D 360 (1'2") 355 (1'2") 365 (1'2")
position
A
L D Ground clearance 400 (1'4") 425 (1'5") 390 (1'4")
FVBH0030
E Hitch height 780 (2'7") 805 (2'8") 770 (2'6")
F Overall height, top of the 2955 (9'8") 2980 (9'9") 2945 (9'8")
stack
4A-21
Performance Data WHEEL LOADERS
Dimensions
WA180-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
1.7 1.55 2440 710 7940
(Loading and excavating of soil, sand and variety of
(2.25) (2.02) (8') (1570) (17500)
other commonly handled materials.)
1.6 1.34 2440 665 8570
II General-purpose bucket with teeth
(2.1) (1.75) (8') (1470) (18890)
1.5 1.3 2440 725 8300
III Excavating bucket with bolt-on cutting edges
(2.0) (1.7) (8') (1600) (18300)
IV Excavating bucket with teeth (Loading and 1.5 1.27 2440 670 8980
excavating of crushed rock and blasted rock.) (2.0) (1.66) (8') (1480) (19800)
V Light material bucket with bolt-on cutting edges; 2.2 1.9 2440 800 6590
(A Lighter-weight, large-capacity bucket.) (2.9) (2.5) (8') (1760) (14530)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 500 (1100) 460 (1010) 400 (880)
Install ROPS canopy 320 kg (710 lb) 180 (400) 170 (370) 140 (310)
Install steel cab 310 kg (680 lb) 190 (420) 175 (390) 150 (330)
Install additional counterweight +280 (+620) +520 (+1150) +450 (+990)
4A-22
Performance Data WHEEL LOADERS
Dimensions
WA180-3
Unit: mm (ft.in)
14.00-24 and
18.4-24 tires 15.5-25 tires
17.5-25 tires
Tread 1820 (6') 1820 (6') 1820 (6')
Width over tires 2320 (7'7") 2225 (7'4") 2220 (7'3")
2260 (7'5")
45
A Wheelbase 2700 2700 2700
K (8'10") (8'10") (8'10")
J
B B Hinge pin height, max. 3545 (11'7") 3535 (11'7") 3505 (11'6")
H F G height
48
C Hinge pin height, carry
E 365 (1'2") 365 (1'2") 375 (1'3")
C D position
A D Ground clearance 430 (1'5") 420 (1'5") 390 (1'4")
L
FVBH0030 E Hitch height 820 (2'8") 810 (2'8") 780 (2'7")
F Overall height, top of the 3000 2990 2960
stack (9'10") (9'10") (9'9")
G Overall height, ROPS cab 3100 3090 3060
(10'2") (10'2") (10')
Measured with 18.4-25 tires
Buckets I II III IV
H.Dumping clearance, max. height and 45 dump angle* 2720 (8'11") 2630 (8'8") 2745 (9') 2660 (8'9")
Reach at 2130 mm (7') cut edge clearance and 45 dump angle 1395 (4'7") 1420 (4'8") 1380 (4'6") 1410 (4'8")
J. Reach at max. height and 45 dump angle* 970 (3'2") 1040 (3'5") 940 (3'1") 1015 (3'4")
Reach with arm horizontal and bucket level 2085 (6'10") 2195 (7'2") 2045 (6'9") 2160 (7'1")
K. Operating height (fully raised) 4700 (15'5") 4700 (15'5") 4645 (15'3") 4645 (15'3")
L. Overall length 6410 (21') 6520 (21'5") 6375 (20'11") 6485 (21'3")
Loader clearance circle (bucket at carry, outside corner of bucket) 10770 (35'4") 10840 (35'7") 10750 (35'3") 10820 (35'6")
0 115 (4.5") 125 (4.9") 115 (4.5") 125 (4.9")
Digging depth
10 285 (11.2") 310 (12.2") 275 (10.8") 305 (12")
* At the end of teeth or BOC
4A-23
Performance Data WHEEL LOADERS
Dimensions
WA180PT-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
1.7 1.4 2440 600 9400
(Loading and excavating of soil, sand and variety of
(2.25) (1.83) (8') (1320) (20730)
other commonly handled materials.)
Unit: mm (ft.in)
17.5-25 tires 17.5-R25 tires
Tread 1820 (6')
Width over tires 2310 (7'7")
45
K
J
B A Wheelbase 2700 (8'10")
F G
H B Hinge pin height, max. height 3760(12'4")
48
E C Hinge pin height, carry position 430 (1'5")
C D
D Ground clearance 425 (1'5")
A
L E Hitch height 815 (2'8")
FVBH0030 F Overall height, top of the stack 2995 (9'10")
G Overall height, ROPS cab 3095 (10'2")
4A-24
Performance Data WHEEL LOADERS
Dimensions
WA250-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
2.1 1.8 2685 970 9500
(Loading and excavating of soil, sand and variety of
(2.75) (2.35) (8'10") (2140) (20940)
other commonly handled materials.)
1.9 1.7 2685 875 10520
II General-purpose bucket with teeth
(2.5) (2.25) (8'10") (1930) (23190)
1.9 1.6 2685 935 10050
III Excavating bucket with bolt-on cutting edges
(2.5) (2.1) (8'10") (2060) (22160)
IV Excavating bucket with teeth (Loading and 1.8 1.5 2685 845 11200
excavating of crushed rock and blasted rock.) (2.35) (1.95) (8'10") (1860) (24690)
V Light material bucket with bolt-on cutting edges; 2.7 2.3 2685 1030 8000
(A Lighter-weight, large-capacity bucket.) (3.55) (3.0) (8'10") (2270) (17640)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 520 (1150) 450 (990) 395 (870)
Install ROPS canopy 280 kg (620 lb) 240 (530) 210 (460) 185 (410)
Install steelcab 310 kg (680 lb) 210 (460) 185 (410) 160 (350)
Install additional counterweight +280 (+620) +590 (+1300) +520 (+1150)
4A-25
Performance Data WHEEL LOADERS
Dimensions
WA250-3
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
45 Width over tires 2375 (7'10") 2465 (8'1")
K A Wheelbase 2900 (9'6") 2900 (9'6")
J
B
F G B Hinge pin height, max. height 3680 (12'1") 3750 (12'4")
H
48 C Hinge pin height, carry position 400 (1'4") 370 (1'3")
E
C D D Ground clearance 395 (1'4") 465 (1'6")
A E Hitch height 910 (3') 980 (3'3")
L
FVBH0030
F Overall height, top of the stack 3075 (10'1") 3145 (10'4")
G Overall height, ROPS cab 3195 (10'6") 3265 (10'9")
4A-26
Performance Data WHEEL LOADERS
Dimensions
WA250PT-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges; 1.9 2685 1500
(Loading and excavating of soil, sand and variety of (2.5) (8'10") (29893)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 520 (1150) 450 (990) 395 (870)
Install ROPS canopy 280 kg (620 lb) 240 (530) 167 (369) 146 (321)
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
45 Width over tires 2300 (7'7") 2450 (8'0")
K
J A Wheelbase 2900 (9'6") 2900 (9'6")
B
F G B Hinge pin height, max. height 3805 (12'6") 3865 (12'8")
H
48 C Hinge pin height, carry position
E
C D D Ground clearance 395 (1'4") 455 (1'6")
A E Hitch height 910 (3') 970 (3'2")
L F Overall height, top of the stack 3075 (10'1") 3135 (10'3")
FVBH0030
G Overall height, ROPS cab 3195 (10'6") 3255 (10'8")
4A-27
Performance Data WHEEL LOADERS
Dimensions
WA320-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
2.7 2.3 2740 1270 12500
(Loading and excavating of soil, sand and variety of
(3.55) (3.0) (9') (2790) (27600)
other commonly handled materials.)
2.5 2.2 2760 1150 13600
II General-purpose bucket with teeth
(3.25) (2.9) (9'1") (2540) (30000)
2.3 1.95 2740 1320 14010
III Excavating bucket with bolt-on cutting edges
(3.0) (2.55) (9') (2910) (30880)
IV Excavating bucket with teeth (Loading and 2.1 1.8 2760 1210 15490
excavating of crushed rock and blasted rock.) (2.75) (2.35) (9'1") (2670) (34150)
V Light material bucket with bolt-on cutting edges; 3.2 2.8 2740 1430 10500
(A Lighter-weight, large-capacity bucket.) (4.2) (3.7) (9') (3150) (23100)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 510 (1125) 490 (1080) 465 (1025)
Install additional counterweight 325 kg (715 lb) +325 (+715) +815 (+1795) +680 (+1500)
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 2050 (6'9") 2050 (6'9")
45 Width over tires 2530 (8'4") 2585 (8'6")
K A Wheelbase 3030 (9'11") 3030 (9'11")
J
B
F G B Hinge pin height, max. height 3815 (12'6") 3885 (12'9")
H
48 C Hinge pin height, carry position 475 (1'7") 450 (1'6")
E
C D D Ground clearance 330 (1'11") 400 (1'4")
A E Hitch height 1120 (3'8") 1190 (3'11")
L
FVBH0030
F Overall height, top of the stack 3165 (10'5") 3235 (10'7")
G Overall height, ROPS cab 3245 (10'8") 3315 (10'10")
4A-28
Performance Data WHEEL LOADERS
Dimensions
Measured with 20.5-25 tires
Buckets I II III IV
H.Dumping clearance, max. height and 45 dump angle* 2850 (9'4") 2915 (9'7") 2935 (9'8") 2800(9'2")
Reach at 2130 mm (7') cut edge clearance and 45 dump angle 1570 (5'2") 1500 (4'11") 1630 (5'4") 1565 (5'2")
J. Reach at max. height and 45 dump angle* 1035 (3'5") 1155 (3'9") 950 (3'1") 1070 (3'6")
Reach with arm horizontal and bucket level 2395 (7'10") 2520 (8'3") 2275 (7'6") 2400 (7'10")
K. Operating height (fully raised) 5265 (17'3") 5265 (17'3") 5090 (16'8") 5090 (16'8")
L. Overall length 7410 (24'4") 7535 (24'9") 7290 (23'11") 7415 (24'4")
Loader clearance circle (bucket at carry, outside corner of bucket) 12160 (39'11") 12220 (40'1") 12090 (39'8") 12110 (39'9")
0 90 (3.5") 105 (4.1") 90 (3.5") 105 (4.1")
Digging depth
10 295 (11.6") 330 (1'1") 275 (10.8") 310 (1')
* At the end of teeth or BOC
4A-29
Performance Data WHEEL LOADERS
Dimensions
WA320-3 CUSTOM
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
2.7 2.3 2740 1245 13050
(Loading and excavating of soil, sand and variety of
(3.53) (3.01) (9') (2745) (28770)
other commonly handled materials.)
2.5 1.95 2760 1125 14680
II General-purpose bucket with teeth
(3.0) (2.55) (9'1") (2720) (32360)
2.3 1.95 2740 1320 14010
III Excavating bucket with bolt-on cutting edges
(3.0) (2.55) (9') (2910) (30890)
IV Excavating bucket with teeth (Loading and 2.1 1.8 2760 1210 15490
excavating of crushed rock and blasted rock.) (2.75) (2.35) (9'1") (2670) (34150)
V Light material bucket with bolt-on cutting edges; 3.2 2.8 2740 1430 10450
(A Lighter-weight, large-capacity bucket.) (4.2) (3.7) (9') (3150) (23040)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 310 (683) 280 (620) 245 (540)
Install additional counterweight 325 kg (715 lb) +325 (+715) +830 (+1830) +690 (+1520)
Unit: mm (ft.in)
20.5-25 tires
Tread 2050 (6'9")
45 Width over tires 2585 (8'6")
K A Wheelbase 3030 (9'11")
J
B
F G B Hinge pin height, max. height 3885 (12'9")
H
48 C Hinge pin height, carry position 450 (1'6")
E
C D D Ground clearance 400 (1'4")
A E Hitch height 1190 (3'11")
L
FVBH0030
F Overall height, top of the stack 3235 (10'6")
G Overall height, ROPS cab 3335 (10'11")
4A-30
Performance Data WHEEL LOADERS
Dimensions
WA380-5
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
3.3 2.9 2905 1645 15080
(Loading and excavating of soil, sand and variety of
(4.3) (3.8) (9'6") (3627) (33245)
other commonly handled materials.)
3.1 27 2925 1570 16315
II General-purpose bucket with teeth
(4.1) (3.5) (9'7") (3461) (35968)
2.9 2.4 2925 1720 16621
III Excavating bucket with bolt-on cutting edges
(3.8) (3.1) (9'7") (3792) (36642)
IV Excavating bucket with teeth (Loading and 2.9 2.4 2925 1765 17131
excavating of crushed rock and blasted rock.) (3.8) (3.1) (9'7") (3891) (37766)
2.7 2.3 2925 1645 18048
V Excavating bucket with teeth (3.5) (3.0) (9'7") (3627) (39789)
VI Light material bucket with bolt-on cutting edges; 4.0 3.4 2905 1835 13766
(A Lighter-weight, large-capacity bucket.) (5.2) (4.4) (9'6") (4045) (30348)
Operating weight
kg/lb
Tires/Buckets I II III IV V VI
20.5-25-16PR 16230 16160 16310 16350 16230 16420
(L-3) 35781 35626 35957 36045 35781 36200
23.5-25-16PR 17310 17240 17390 17430 17310 17500
(L-3) 38162 38007 38338 38426 38162 38581
23.5-25-16PR 16500 16430 16580 16620 16500 16690
(L-4) 26376 36222 36552 36640 26376 36795
23.5-25-20PR 16990 16920 17070 17110 16990 17180
(L-5) 37456 37302 37633 37721 37456 37875
Weight Changes
Change in
Operating Tipping load Tipping load full Width over tires Ground
weight straight turn clearance vertical
Tires dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-16PR (L-3) 0 0 0 0 0 0 2695 8'10" 390 1'3" 0 0
23.5-25-16PR (L-3) +1,080 +2,381 +740 +1,632 +650 +1,433 2,780 9'1" 460 1'6" +65 +3"
23.5-25-16PR (L-4) +270 +595 +210 +463 +185 +408 2780 9'1" 490 1'7" +100 +3.9"
23.5-25-20PR (L-5) +760 +1,675 +600 +1,323 +535 +1,179 2780 9'1" 505 1'8" +115 +4.5"
Remove ROPS cab 660 1,455 650 1,433 625 1,378
Install additional
counterweight +325 +717 +860 +1,896 +715 +1,577
4A-31
Performance Data WHEEL LOADERS
Dimensions
WA380-5
Unit: mm (ft.in)
20.5-25 tires 23.5-25 tires
Tread 2160 (7'1") 2160 (7'1")
45 Width over tires 2695 (8'10") 2780 (9'1")
K A Wheelbase 3300 (10'10") 3200 (10'6")
J
B
F G B Hinge pin height, max. height 4030 (13'3") 4095 (13'5")
H
48 C Hinge pin height, carry position 520 (1'8") 570 (1'10")
E
C D D Ground clearance 390 (1'3") 460 (1'6")
A E Hitch height 1085 (3'7") 1150 (3'9")
L
FVBH0030
F Overall height, top of the stack 2885 (9'6") 2950 (9'8")
G Overall height, ROPS cab 3315 (10'11") 3380 (11'1")
Buckets V VI
H.Dumping clearance, max. height and 45 dump angle* 2840 (9'4") 2790 (9'2")
Reach at 2130 mm (7') cut edge clearance and 45 dump angle 1755 (5'9") 1800 (5'11")
J. Reach at max. height and 45 dump angle* 1225 (4'0") 1295 (4'3")
Reach with arm horizontal and bucket level 2695 (8'10") 2775 (9'1")
K. Operating height (fully raised) 5405 (17'9") 5655 (18'7")
L. Overall length 8235 (27'0") 8320 (27'4")
Loader clearance circle (bucket at carry, outside corner of bucket) 13200 (43'4") 13220 (43'4")
0 140 (5.5") 125 (4.9")
Digging depth
10 380 (1'3") 380 (1'3")
* At the end of teeth or BOC
Buckets V VI
H.Dumping clearance, max. height and 45 dump angle* 2905 (6'10") 2855 (9'4")
Reach at 2130 mm (7') cut edge clearance and 45 dump angle 1725 (5'8") 1770 (5'10")
J. Reach at max. height and 45 dump angle* 1165 (3'10") 1235 (4'1")
Reach with arm horizontal and bucket level 2635 (8'8") 2715 (8'11")
K. Operating height (fully raised) 5340 (17'6") 5590 (18'4")
L. Overall length
Loader clearance circle (bucket at carry, outside corner of bucket) 13150 (43'2") 13170 (43'3")
0 75 (3.0") 60 (2.4")
Digging depth
10 315 (1'0") 315 (1'0")
* At the end of teeth or BOC
4A-32
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (with high lift boom)
Capacity Bucket Bucket Breakout
Heaped Struck width weight force
m3(cu.yd) m3 (cu.yd) mm (ft.in) kg (lb) kg (lb)
I Hi-lift bucket with bolt-on cutting edges 2.9 2.4 2905 1720 16470
(3.8) (3.1) (9'6") (3792) (36310)
II Hi-lift bucket with teeth 2.7 2.3 2915 1645 17950
(3.5) (3.0) (9'7") (3627) (39573)
Unit: mm (ft.in)
20.5-25 tires 23.5-25 tires
Tread 2610 (7'1") 2160 (7'1")
45 Width over tires 2695 (8'10") 2780 (9'10")
K A Wheelbase 3300 (10'10") 3300 (10'10")
J
B B Hinge pin height, max. height 4560 (14'12") 4625 (15'2")
F G
H C Hinge pin height, carry position 685 (2'3") 685 (2'3")
48
E D Ground clearance 390 (1'3") 455 (1'6")
C D E Hitch height 1085 (3'7") 1150 (3'9")
A F Overall height, top of the stack 285 (9'6") 2950 (9'8")
L
FVBH0030 G Overall height, ROPS cab 3315 (10'10") 3380 (11'1")
4A-33
Performance Data WHEEL LOADERS
Dimensions
WA380-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
3.2 2.7 2905 1630 15100
(Loading and excavating of soil, sand and variety of
(4.2) (3.55) (9'6") (3590) (33300)
other commonly handled materials.)
3.0 2.6 2920 1560 16300
II General-purpose bucket with teeth
(3.9) (3.4) (9'7") (3440) (36000)
2.8 2.35 2905 1710 16600
III Excavating bucket with bolt-on cutting edges
(3.65) (3.07) (9'6") (3770) (36600)
IV Excavating bucket with teeth (Loading and 2.6 2.2 2920 1640 18100
excavating of crushed rock and blasted rock.) (3.4) (2.9) (9'7") (3620) (39900)
V Light material bucket with bolt-on cutting edges; 4.0 3.4 2905 1830 13100
(A Lighter-weight, large-capacity bucket.) (5.25) (4.45) (9'6") (4030) (28900)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 670 (1475) 610 (1345) 590 (1300)
Install additional counterweight 325 kg (715 lb) +325 (+715) +830 (+1835) +690 (+1520)
4A-34
Performance Data WHEEL LOADERS
Dimensions
WA380-3
Unit: mm (ft.in)
20.5-25 tires 23.5-25 tires
Tread 2160 (7'1") 2160 (7'1")
45 Width over tires 2695 (8'10") 2780 (9'1")
K A Wheelbase 3200 (10'6") 3200 (10'6")
J
B
F G B Hinge pin height, max. height 4030 (13'3") 4095 (13'5")
H
48 C Hinge pin height, carry position 520 (1'8") 505 (1'8")
E
C D D Ground clearance 390 (1'3") 455 (1'6")
A E Hitch height 1085 (3'7") 1150 (3'9")
L
FVBH0030
F Overall height, top of the stack 3280 (10'9") 3345 (11')
G Overall height, ROPS cab 3315 (10'10") 3380 (11'1")
4A-35
Performance Data WHEEL LOADERS
Dimensions
WA420-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
3.7 3.2 3050 1740 18500
(Loading and excavating of soil, sand and variety of
(4.85) (4.2) (10') (3840) (40800)
other commonly handled materials.)
3.5 3.0 3070 1680 20000
II General-purpose bucket with teeth
(4.6) (3.9) (10'1") (3700) (44100)
3.3 2.8 3050 1830 19800
III Excavating bucket with bolt-on cutting edges
(4.3) (3.65) (10') (4030) (43650)
IV Excavating bucket with teeth (Loading and 3.1 2.6 3070 1775 21600
excavating of crushed rock and blasted rock.) (4.05) (3.4) (10'1") (3910) (47620)
V Light material bucket with bolt-on cutting edges; 4.6 4.0 3050 1960 15500
(A Lighter-weight, large-capacity bucket.) (6.0) (5.25) (10') (4320) (34170)
VI Rock bucket with teeth ; (Spade nose). (Loading and 3.1 2.7 3050 1825 18100
excavating of blasted rock) (4.05) (3.55) (10') (4020) (39900)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 670 (1475) 600 (1325) 580 (1280)
Install additional counterweight +325 (+715) +835 (+1840) +700 (+1545)
4A-36
Performance Data WHEEL LOADERS
Dimensions
WA420-3
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2200 (7'3") 2250 (7'5")
45 Width over tires 2820 (9'3") 2950 (9'8")
K A Wheelbase 3300 (10'10") 3300 (10'10")
J
B
F G B Hinge pin height, max. height 4250 (13'11") 4315 (14'2")
H
48 C Hinge pin height, carry position 520 (1'8") 500 (1'8")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3340 (10'11") 3405 (11'2")
G Overall height, ROPS cab 3380 (11'1") 3445 (11'4")
4A-37
Performance Data WHEEL LOADERS
Dimensions
WA430-5
*:Excluding tire protectors
Capacity Struck Bucket Bucket Breakout
Heaped width* weight force
m3(cu.yd) m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
(Loading and excavating of soil, sand and variety of other
3.7 3.2 3050 1745 18400
commonly handled materials.)
(4.8) (4.2) (10') (3847) (40565)
VII Light material bucket with bolt-on cutting edges; 4.6 4.0 3050 1980 15400
(A Lighter-weight, large-capacity bucket.) (6.0) (5.2) (10') (4365) (33950)
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII
17810 17735 17900 17950 17825 17895 18045
23.5-25-16PR (L-3) 39265 39100 39460 39570 39295 39450 39780
18230 18155 18320 18370 18245 18315 18465
26.5-25-16PR (L-3) 40190 40025 40385 40495 40220 40375 40705
Weight Changes
Change in
Operating Tipping load Tipping load Width over tires Ground vertical
Tires weight straight full turn clearance
dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-16PR (L-3) 0 0 0 0 0 0 2820 9'3" 460 1'6" 0 0
26.5-25-16PR (L-3) +420 +925 +330 +730 +290 +640 2940 9'8" 525 1'9" +65 +3"
Remove ROPS cab -660 -1455 -635 -1400 -605 -1335
Install additional
counterweight +325 +715 +880 +1940 +735 +1620
4A-38
Performance Data WHEEL LOADERS
Dimensions
WA430-5
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2200 (7'3") 2200 (7'3")
45 Width over tires 2820 (9'3") 2940 (9'8")
K A Wheelbase 3350 (11'0") 3350 (11'0")
J
B
F G B Hinge pin height, max. height 4250 (13'11") 4315 (14'2")
H
48 C Hinge pin height, carry position 520 (1'8") 585 (1'11")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1150 (3'9") 1215 (4'0")
L
FVBH0030
F Overall height, top of the stack 2965 (9'9") 3030 (9'11")
G Overall height, ROPS cab 3380 (11'1") 3445 (11'4")
4A-39
Performance Data WHEEL LOADERS
Dimensions
WA470-5
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
4.2 3.5 3170 2050 19580
(Loading and excavating of soil, sand and variety of (5.5) (4.6) (10'5") (4519) (43162)
other commonly handled materials.)
II General-purpose bucket with teeth 3.9 3.3 3190 1970 21110
(5.1) (4.3) (10'6") (4343) (46534)
III Excavating bucket with bolt-on cutting edges 3.8 3.2 3170 2150 20700
(5.0) (4.2) (10'5") (4740) (45634)
IV Excavating bucket with teeth and segments (Loading 3.8 3.2 3190 2200 21310
and excavating of crushed rock and blasted rock.) (5.0) (4.2) (10'6") (4850) (46983)
3.6 3.1 3190 2070 22430
V Excavating bucket with teeth (4.7) (4.1) (10'6") (4564) (49456)
VI Rock bucket with teeth ; (Spade nose). (Loading and 3.6 3.1 3170 2165 19370
excavating of blasted rock) (4.7) (4.1) (10'5") (4773) (42712)
VII Loose material bucket 4.6 3.9 3170 2110 17130
(6.0) (5.1) (10'5") (4652) (37766)
VIII Light material bucket with bolt-on cutting edges; 5.2 4.5 3170 2185 16820
(A Lighter-weight, large-capacity bucket.) (6.8) (5.9) (10'5") (4817) (37092)
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII VIII
23.5-25-20PR 21600 21520 21700 21750 21620 21715 21660 21735
(L-3) 47619 47443 47840 47950 47663 47873 47752 47917
23.5-25-20PR 21290 21210 21390 21440 21310 21405 21350 21425
(L-2) 46936 46760 47156 47267 46980 47189 47068 47236
26.5-25-16PR 21905 21825 22005 22055 21925 22020 21965 22040
(L-3) 48292 48115 48512 48622 48336 48545 48424 48589
26.5-25-20PR 22330 22250 22430 22480 22350 22445 22390 22465
(L-4) 49229 49052 49449 49559 49273 49482 49361 49526
26.5-25-20PR 22730 22650 22830 22880 22750 22845 22790 22865
(L-5) 50110 49934 50331 50441 50155 50364 50243 50409
Static tipping load kg/lb
Straight
Tires/Buckets I II III IV V VI VII VIII
23.5-25-20PR 16700 16780 16600 16550 16680 16585 16640 16565
(L-3) 36817 36993 36596 36486 36773 36563 36685 36519
23.5-25-20PR 16460 16540 16360 16310 16440 16345 16400 16325
(L-2) 36288 36464 36067 35957 36244 36034 36155 35990
26.5-25-16PR 16940 17020 16840 16790 16920 16825 16880 16805
(L-3) 37346 37522 37125 37015 37302 37092 37214 37048
26.5-25-20PR 17270 17350 17170 17120 17250 17155 17210 17135
(L-4) 38073 38250 37853 37743 38029 37820 37941 37776
26.5-25-20PR 17580 17660 17480 17430 17560 17465 17520 17445
(L-5) 38757 38933 38536 38426 38713 38503 38625 38459
Static tipping load kg/lb
40 full turn
Tires/Buckets I II III IV V VI VII VIII
23.5-25-20PR 14530 14610 14430 14380 14510 14415 14470 14395
(L-3) 32033 32209 31812 31702 31989 31779 31901 31735
23.5-25-20PR 14320 14400 14220 14170 14300 14205 14260 14185
(L-2) 31570 31746 31349 31239 31526 31316 31438 31272
26.5-25-16PR 14740 14820 14640 14590 14720 14625 14680 14605
(L-3) 32496 32672 32275 32165 32452 32242 32364 32198
26.5-25-20PR 15030 15110 14930 14880 15010 14915 14970 14895
(L-4) 33135 33312 32915 32804 33091 32882 33003 32838
26.5-25-20PR 15310 15390 15210 15160 15290 15195 15250 15175
(L-5) 33752 33929 33532 33422 33708 33499 33620 33455
Weight Changes
Operating Tipping load Tipping load full Ground Change in
Width over tires vertical
Tires weight straight turn clearance dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-20PR (L-3) 0 0 0 0 0 0 2920 9'7" 460 1'6" 0 0
23.5-25-20PR (L-2) 310 683 240 529 210 463 2920 9'7" 460 1'6" 0 0
26.5-25-16PR (L-3) +305 +672 +240 +529 +210 +463 3010 9'11" 525 1'9" +65 3"
26.5-25-20PR (L-4) +730 +1,609 +570 +1,257 +500 +1,102 3010 9'11" 525 1'9" +65 3"
26.5-25-20PR (L-5) +1,130 +2491 +880 +1,940 +780 +1720 3010 9'11" 540 1'9" +80 3.1"
Remove ROPS cab 660 1,455 610 1,345 590 1,300
Install additional +400 +880 +1,030 +2,270 +860 +1,895
counterweight
4A-40
Performance Data WHEEL LOADERS
Dimensions
WA470-5
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2300 (7'7") 2300 (7'7")
45 Width over tires 2920 (9'7") 3010 (9'10")
K A Wheelbase 3450 (11'4") 3400 (11'2")
J
B
F G B Hinge pin height, max. height 4295 (14'1") 4360 (14'4")
H
48 C Hinge pin height, carry position 585 (1'11") 565 (1'10")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3015 (9'11") 3080 (10'1")
G Overall height, ROPS cab 3395 (11'2") 3460 (11'4")
4A-41
Performance Data WHEEL LOADERS
Dimensions
WA470-5 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I Hi-lift bucket with bolt-on cutting edges 3.8 3.2 3170 2150 20070
(5.0) (4.2) (10'5") (4,740) (44,250)
II Hi-lift bucket with teeth 3.6 3.1 3190 2070 21750
(4.7) (4.1) (10'6") (4,564) (47,950)
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2300 (7'7") 2300 (7'7")
45 Width over tires 2920 (9'7") 3010 (9'11")
K A Wheelbase 3450 (11'4") 3450 (11'4")
J
B
F G B Hinge pin height, max. height 4805 (15'10") 4870 (16')
H
48 C Hinge pin height, carry position 730 (2'5") 730 (2'5")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3015 (9'11") 3080 (10'2")
G Overall height, ROPS cab 3395 (11'2") 3460 (11'5")
4A-42
Performance Data WHEEL LOADERS
Dimensions
WA470-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
4.2 3.6 3170 2090 19600
(Loading and excavating of soil, sand and variety of
(5.5) (4.7) (10'5") (4610) (43200)
other commonly handled materials.)
3.9 3.4 3190 2015 21100
II General-purpose bucket with teeth
(5.1) (4.45) (10'6") (4440) (46500)
3.8 3.3 3170 2200 20700
III Excavating bucket with bolt-on cutting edges
(5.0) (4.3) (10'5") (4850) (45600)
IV Excavating bucket with teeth (Loading and 3.6 3.1 3190 2130 22400
excavating of crushed rock and blasted rock.) (4.7) (4.05) (10'6") (4700) (49400)
V Light material bucket with bolt-on cutting edges; 5.2 4.5 3170 2330 16800
(A Lighter-weight, large-capacity bucket.) (6.8) (5.9) (10'5") (5140) (37000)
VI Rock bucket with teeth ; (Spade nose). (Loading and 3.5 3.0 3170 2120 18600
excavating of blasted rock) (4.6) (3.9) (10'5") (4670) (41000)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 670 (1475) 600 (1325) 580 (1280)
Install additional counterweight +400 (+885) +1010 (+2220) +845 (+1865)
4A-43
Performance Data WHEEL LOADERS
Dimensions
WA470-3
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2300 (7'7") 2300 (7'7")
45 Width over tires 2920 (9'7") 3010 (9'10")
K A Wheelbase 3400 (11'2") 3400 (11'2")
J
B
F G B Hinge pin height, max. height 4295 (14'1") 4230 (14'4")
H
48 C Hinge pin height, carry position 590 (1'11") 570 (1'10")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3385 (11'1") 3450 (11'4")
G Overall height, ROPS cab 3395 (11'2") 3460 (11'4")
4A-44
Performance Data WHEEL LOADERS
Dimensions
WA480-5
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
4.6 4.0 3170 2260 21620
(Loading and excavating of soil, sand and variety of
(6.0) (5.2) (10'5") (4982) (47658)
other commonly handled materials.)
4.3 3.8 3190 2165 23045
II General-purpose bucket with teeth
(5.6) (5.0) (10'6") (4773) (50805)
4.1 3.5 3170 2220 23555
III Excavating bucket with bolt-on cutting edges
(5.4) (4.6) (10'5") (4894) (51929)
IV Excavating bucket with teeth and segments
4.1 3.5 3190 2255 24170
(Loading and excavating of crushed rock and (5.4) (4.6) (10'6") (4971) (53278)
blasted rock.)
3.8 3.2 3190 2125 25390
V Excavating bucket with teeth (5.0) (4.2) (10'6") (4685) (55975)
4.9 4.2 3170 2340 19990
VI Loose material bucket (6.4) (5.5) (10'5") (5159) (44061)
VII Light material bucket with bolt-on cutting edges; 6.1 5.2 3170 2410 19270
(A Lighter-weight, large-capacity bucket.) (8.0) (6.8) (10'5") (5313) (42487)
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII
26.5-25-20PR 24145 24050 24145 24140 24010 24225 24295
(L-3) 53230 53021 53230 53219 52932 53406 53561
26.5-25-20PR 24505 24410 24505 24500 24370 24585 24655
(L-4) 54024 53814 54024 54012 53726 54200 54354
26.5-25-20PR 24905 24810 24905 24900 24770 24985 25055
(L-5) 54906 54696 54906 54895 54608 55082 55236
Weight Changes
Operating Tipping load Tipping load full Width over tires Ground Change in
vertical
Tires weight straight turn clearance dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
26.5-25-20PR (L-3) 0 0 0 0 0 0 3010 9'11" 525 1'9" 0 0
26.5-25-20PR (L-4) +360 +794 +250 +551 +220 +485 3010 9'11" 525 1'9" 0 0
26.5-25-20PR (L-5) +760 +1,675 +530 +1,168 +470 +1036 3010 9'11" 540 1'9" +15 +0.6"
Remove ROPS cab 660 1,455 550 1,213 530 1,168
Install additional +400 +880 +950 +2,094 +790 +1,742
counterweight
4A-45
Performance Data WHEEL LOADERS
Dimensions
WA480-5
Unit: mm (ft.in)
26.5-25 tires
Tread 2300 (7'7")
45 Width over tires 3010 (9'10")
K A Wheelbase 3450 (11'4")
J
B
F G B Hinge pin height, max. height 4505 (14'9")
H
48 C Hinge pin height, carry position 585 (1'11")
E
C D D Ground clearance 525 (1'9")
A E Hitch height 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3080 (10'1")
G Overall height, ROPS cab 3500 (11'6")
Buckets V VI VII
H.Dumping clearance, max. height and 45 dump angle* 3170 (10'5") 3125 (10'3") 3080 (10'1")
Reach at 2130 mm (7') cut edge clearance and 45 dump angle 2130 (7'0") 2180 (7'2") 2205 (7'3")
J. Reach at max. height and 45 dump angle* 1420 (4'8") 1490 (4'11") 1535 (5'0")
Reach with arm horizontal and bucket level 3050 (10'0") 3135 (10'3") 3195 (10'6")
K. Operating height (fully raised) 6025 (19'9") 6175 (20'3") 6450 (21'2")
L. Overall length 9185 (30'2") 9270 (30'5") 9330 (30'7")
Loader clearance circle (bucket at carry, outside corner of bucket) 14120 (46'4") 14140 (46'5") 14170 (46'6")
0 110 (4.3") 90 (3.5") 90 (3.5")
Digging depth
10 380 (1'3") 375 (1'3") 385 (1'3")
* At the end of teeth or BOC
4A-46
Performance Data WHEEL LOADERS
Dimensions
WA500-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
4.3 3.7 3460 2570 27000
I Excavating bucket (straight edge) with teeth (5.6) (4.8) (11'4") (5670) (59520)
4.3 3.7 3400 2960 21780
II Excavating bucket (spade nose) with tip teeth (5.6) (4.8) (11'2") (6530) (48020)
III General-purpose bucket with bolt on cutting edge 5.0 4.3 3400 2760 23700
without teeth ; Loading stockpile products (6.5) (5.6) (11'2") (6080) (52250)
5.5 4.7 3400 2880 21200
IV Loose material bucket with bolt on cutting edge (7.2) (6.1) (11'2") (6350) (46740)
Operating weight
kg/lb
Tires/Buckets I II III IV
28220 28610 28410 27910
26.5-25-20PR (L-3) 62210 63070 62630 61530
28770 29160 28960 28460
29.5-25-22PR (L-3) 63430 64290 63850 62750
28620 29010 28810 28310
26.5-25-20PR (L-4) 63100 63960 63520 62420
28980 29370 29170 28670
26.5-25-20PR (L-5)
63890 64750 64310 63210
29.5-25-28PR (L-4) 29310 29700 29500 29000
64620 65480 65040 63940
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab 585 (1290) 510 (1125) 490 (1080)
Remove steel cab 460 (1015) 400 (880) 385 (850)
Remove front half fender 45 (100) 14 (30) 14 (30)
Remove teeth 315 (690) 415 (910) 415 (915)
Install additional counterweight +1000 (+2205) +2400 (+5290) +2000 (+4410)
4A-47
Performance Data WHEEL LOADERS
Dimensions
WA500-3
Unit: mm (ft.in)
26.5-25 tires 29.5-25 tires
Tread 2400(7'10") 2400 (7'10")
45 Width over tires 3090 (10'2") 3190 (10'6")
K A Wheelbase 3600 (11'10") 3600 (11'10")
J
B
F G B Hinge pin height, max. height 4455 (14'7") 4500 (14'9")
H
48 C Hinge pin height, carry position 520 (1'8") 565 (1'10")
E
C D D Ground clearance 405 (1'4") 450 (1'5")
A E Hitch height 1195 (3'11") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3660 (12') 3705 (12'2")
G Overall height, ROPS canopy 3815 (12'6") 3860 (12'8")
4A-48
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
4.2 3.6 3460 2580 28450
I Excavating bucket (straight edge) with teeth (5.6) (4.8) (11'4") (5690) (62720)
* Excluding tire protectors
Unit: mm (ft.in)
29.5-25 tires
Tread 2400 (7'20")
45 Width over tires 3190 (10'6")
K A Wheelbase 3600 (11'10")
J
B
F G B Hinge pin height, max. height 4905 (16'1")
H
48 C Hinge pin height, carry position 565 (1'10")
E
C D D Ground clearance 450 (1'5")
A E Hitch height 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3635 (11'11")
G Overall height, ROPS canopy 3860 (12'8")
4A-49
Performance Data WHEEL LOADERS
Dimensions
WA600-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
6.1 5.1 3685 4250 37600
I Excavating bucket (straight edge) with tip teeth (8.0) (6.7) (12'1") (9370) (82,890)
6.1 5.1 3685 4305 43750
II Excavating bucket (spade nose) with tip teeth (8.0) (6.7) (12'1") (9490) (96,450)
11.0 9.5 4200 4420 31950
III Coal bucket (straight edge) (14.4) (12.4) (13'9") (9,740) (70,440)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 800 (1760) 700 (1540) 615 (1360)
Remove steel cab 430 (950) 310 (680) 275 (610)
Remove teeth 372 (820) 475 (1050) 475 (1050)
Install additional counterweight +1000 (+2200) +2300 (+5070) +2030 (+4480)
4A-50
Performance Data WHEEL LOADERS
Dimensions
WA600-3
Unit: mm (ft.in)
35/65-33 tires 29.5-29 tires
Tread 2650 (8'8") 2650 (8'8")
Width over tires 3570 (11'9") 3480 (11'5")
45
K A Wheelbase 4100 (13'5") 4100 (13'5")
J
B B Hinge pin height, max. height 5155 (16'11") 5110 (16'9")
F G
H C Hinge pin height, carry position 670 (2'2") 625 (2'1")
48
E D Ground clearance 495 (1'7") 450 (1'6")
C D
E Hitch height 1295 (4'3") 1250 (4'1")
A
L F Overall height, top of the stack 4125 (13'6") 4080 (13'5")
FVBH0030 G Overall height, ROPS canopy 4215 (13'10") 4205 (13'10")
Overall height, ROPS and cab 4215 (13'10") 4205 (13'10")
4A-51
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
5.6 4.0 3685 44500
I Excavating bucket (straight edge) with tip teeth (7.3) (5.2) (12'1") (98,210)
5.6 4.0 3685 4400 37500
II Excavating bucket (spade nose) with tip teeth (7.3) (5.2) (12'1") (9,700) (82,670)
* Excluding tire protectors
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
45
K A Wheelbase 4100 (13'5")
J
B B Hinge pin height, max. height 5770 (18'11")
F G
H C Hinge pin height, carry position 670 (2'2")
48
E D Ground clearance 495 (1'7")
C D
E Hitch height 1385 (4'7")
A
L F Overall height, top of the stack 4125 (13'6")
FVBH0030 G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
4A-52
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (for Load & Carry)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
7.5 6.8 3685 5075 35400
I Excavating bucket (spade nose) with tip teeth (9.8) (8.9) (12'1") (11,190) (78,040)
* Excluding tire protectors
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
45
K A Wheelbase 4100 (13'5")
J
B B Hinge pin height, max. height 4850 (15'11")
F G
H C Hinge pin height, carry position 670 (2'2")
48
E D Ground clearance 495 (1'7")
C D
E Hitch height 1385 (4'7")
A
L F Overall height, top of the stack 4125 (13'6")
FVBH0030 G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
Measured with 35/65-33 tires
Buckets I II III
H.Dumping clearance, max. height and 45 dump angle* 2920 (9'7")
J. Reach at max. height and 45 dump angle* 2105 (6'11")
K. Operating height (fully raised) 7065 (23'2")
L. Overall length 11395 (37'5")
Loader clearance circle (bucket at carry, outside corner of bucket) 16450 (54')
0 105 (4.1")
Digging depth
10 505 (1'8")
* At the end of teeth or BOC
4A-53
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (for stone handling)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
38800
I Stone handling bucket (85,540)
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
K A Wheelbase 4100 (13'5")
J
B
43 B Hinge pin height, max. height 4850 (15'11")
FG
H C Hinge pin height, carry position 670 (2'2")
C E D Ground clearance 495 (1'7")
D
E Hitch height 1385 (4'7")
A F Overall height, top of the stack 4125 (13'6")
FVBH0107
G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
NOTE:
a) It forbids riding over obstacle during stone handling (Allowable riding over height must be 50 mm (2") or
less).
b) Travel speed is set only to 1st gear during stone handling.
4A-54
Performance Data WHEEL LOADERS
Dimensions
WA700-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
8.7 7.6 4330 6770 64700
I Excavating bucket (straight edge) without tip teeth (11.4) (9.9) (14'2") (14925) (142640)
8.7 7.6 4330 7150 52700
II Excavating bucket (spade nose) without tip teeth (11.4) (9.9) (14'2") (15760) (116180)
III General-purpose bucket (straight edge) without tip 9.4 8.2 4330 7150 62400
teeth (12.3) (10.7) (14'2") (15760) (137600)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1050 (2315) 965 (2130) 850 (1870)
Remove steel cab 430 (950) 315 (690) 275 (610)
Remove teeth and adapter 890 (1960) +1150 (+2535) +1005 (+2220)
Unit: mm (ft.in)
40/65-39-36PR 45/65-R39
(L-5) tires (L-5) tires
Tread 3000 (9'10") 3060 (10')
45
Width over tires 4040 (13'3") 4160 (13'8")
K A Wheelbase 4800 (15'9") 4800 (15'9")
J
50
B Hinge pin height, max. height 5990 (19'8") 6035 (19'10")
B
H FG C Hinge pin height, carry position 720 (2'4") 765 (2'6")
E D Ground clearance 540 (1'9") 585 (1'11")
C D E Hitch height 1530 (5') 1575 (5'2")
A
L
F Overall height, top of the stack 4825 (15'10") 4870 (16')
FVBH0019 G Overall height, ROPS canopy 4790 (15'9") 4835 (15'10")
4A-55
Performance Data WHEEL LOADERS
Dimensions
WA700-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
8.0 7.0 4330 6830 55800
I Excavating bucket (spade nose) with tip teeth (10.5) (9.2) (14'2") (15060) (123020)
8.7 7.6 4330 7150 52700
II Excavating bucket (spade nose) (11.4) (9.9) (14'2") (15760) (116180)
* Excluding tire protectors
Unit: mm (ft.in)
40/65-39-36 PR (L-5) tires
Tread 3000 (9'10")
45
Width over tires 4040 (13'3")
K A Wheelbase 4800 (15'9")
J
50 B Hinge pin height, max. height 6550 (21'6")
B
H FG C Hinge pin height, carry position 720 (2'4")
E D Ground clearance 540 (1'9")
C D E Hitch height 1545 (5'1")
A
L F Overall height, top of the stack 4580 (15')
FVBH0019
G Overall height, ROPS and cab 4790 (15'9")
4A-56
Performance Data WHEEL LOADERS
Dimensions
WA800-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
11.0 9.3 4810 11430 69000
I Excavating bucket (spade nose) with tip teeth (14.4) (12.2) (15'9") (25200) (152120)
12.3 10.4 4810 12150 64170
II Stock pile (spade nose ) with teeth (16.1) (13.6) (15'9") (26790) (141470)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1385 (3055) 1220 (2690) 1180 (2600)
Remove steel cab 430 (950) 335 (740) 330 (730
Install additional couinter weight +1600 (+3530) +3850 (+8490) +3400 (+7500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
50 B Hinge pin height, max. height 6785 (22'3")
B
H FG C Hinge pin height, carry position 850 (2'9")
E D Ground clearance 550 (1'10")
C D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
4A-57
Performance Data WHEEL LOADERS
Dimensions
WA800-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
10.0 8.5 4810 71790
I Excavating bucket (spade nose) with tip teeth (13.1) (11.1) (15'9") (158270)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1385 (3055) 1220 (2690) 1180 (2600)
Remove steel cab 430 (950) 335 (740) 330 (730)
Install additional couinter weight +1600 (+3530) +3850 (+8490) +3400 (+7500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
50 B Hinge pin height, max. height 7265 (23'10")
B
H FG C Hinge pin height, carry position 850 (2'9")
E D Ground clearance 550 (1'10")
C D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
4A-58
Performance Data WHEEL LOADERS
Dimensions
WA800-3 (for Load & Carry)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
14.0 11.5 5040 67000
I Excavating bucket (spade nose) with tip teeth (18.3) (15.0) (16'6") (147710)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1385 (3055) 1220 (2690) 1180 (2600)
Remove steel cab 430 (950) 335 (740) 330 (730)
Install additional couinter weight +1600 (+3530) +3850 (+8490) +3400 (+7500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
50 B Hinge pin height, max. height 6140 (20'2")
B
H FG C Hinge pin height, carry position 850 (2'9")
E D Ground clearance 550 (1'10")
C D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
4A-59
Performance Data WHEEL LOADERS
Dimensions
WA900-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
13.0 11.0 4810 12320 67900
I Excavating bucket (spade nose) with tip teeth (17.0) (14.4) (15'9") (27160) (149690)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1385 (3055) 1220 (2690) 1180 (2600)
Remove steel cab 430 (950) 335 (740) 330 (730)
Unit: mm (ft.in)
45/65-45-Tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
50 B Hinge pin height, max. height 6960 (22'10")
B
H FG C Hinge pin height, carry position 800 (2'7")
E D Ground clearance 550 (1'10")
C D E Hitch height 1300 (4'3")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
4A-60
Performance Data WHEEL LOADERS
Dimensions
WA900-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
11.5 9.7 4810 71700
I Excavating bucket (spade nose) with tip teeth (15.0) (12.7) (15'9") (158070)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy 1385 (3055) 1220 (2690) 1180 (2600)
Remove steel cab 430 (950) 335 (740) 330 (730)
Unit: mm (ft.in)
45/65-45-Tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
50 B Hinge pin height, max. height 7445 (24'5")
B
H FG C Hinge pin height, carry position 800 (2'7")
E D Ground clearance 550 (1'10")
C D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
4A-61
Performance Data WHEEL LOADERS
Dimensions
WA1200-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
20.0 17.2 6400 23840 130000
I Excavating bucket (spade nose) with tip teeth (26.2) (22.5) (21') (52560) (286600)
* Excluding tire protectors
Unit: mm (ft.in)
55/80-57 tires 65/65-57 tires
Tread 4300 (14'1") 4300 (14'1")
45
Width over tires 5710 (18'9") 5970 (18'9")
K A Wheelbase 7100 (23'4") 7100 (23'4")
J
50 B Hinge pin height, max. height 8830 (29') 8895 (29'2")
B
H FG C Hinge pin height, carry position 1150 (3'9") 1150 (3'9")
E D Ground clearance 650 (2'2") 715 (2'4")
C D E Hitch height 1310 (4'4") 1375 (4'6")
A
L F Overall height, top of the stack 6630 (21'9") 6695 (22')
FVBH0019
G Overall height, ROPS and cab 6865 (22'6") 6930 (22'9")
4A-62
Performance Data WHEEL LOADERS
Dimensions
WA1200-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
18.0 15.0 6400 23170 126000
I Excavating bucket (spade nose) with tip teeth (23.5) (19.6) (21') (51080) (277780)
* Excluding tire protectors
Unit: mm (ft.in)
55/80-57 tires 65/65-57 tires
Tread 4300 (14'1") 4300 (14'1")
45
Width over tires 5710 (18'9") 5970 (18'9")
K A Wheelbase 7100 (23'4") 7100 (23'4")
J
50 B Hinge pin height, max. height 9480 (31'1") 9545 (31'4")
B
H FG C Hinge pin height, carry position 1150 (3'9") 1150 (3'9")
E D Ground clearance 650 (2'2") 715 (2'4")
C D E Hitch height 1310 (4'4") 1375 (4'6")
A
L F Overall height, top of the stack 6630 (21'9") 6695 (22')
FVBH0019
G Overall height, ROPS and cab 6865 (22'6") 6930 (22'9")
4A-63
Performance Data WHEEL LOADERS
Dimensions
WA120-3 (Canada source)
Unit: mm (ft.in)
17.5-25-12PR(L-2)
Tread 1780 (5'10")
45 Width over tires 2225 (7'4")
K A Wheelbase 2600 (8'6")
J
B
F G B Hinge pin height, max. height 3475 (11'5")
H
48 C Hinge pin height, carry position 355 (1'2")
E
C D D Ground clearance 425 (1'5")
A E Hitch height 805 (2'8")
L
FVBH0030
F Overall height, top of the stack 2995 (9'10")
G Overall height, ROPS canopy 3100 (10'2")
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires & Options
kg (lb) Straight Full Turn
Additional Counterweight (removed) 280 (620) 530 (1170) 460 (1010)
ROPS Cab (removed)
ROPS Canopy (instead of ROPS Cab) 180 (400) 170 (375) 150 (330)
Bucket Teeth (instead of bolt-on cutting edge)
15.5-25-12PR (L2) tubeless tires
15.5-25-12PR (L3) tubeless tires
17.5-25-12PR (L2) tubeless tires 0 0 0
17.5-25-12PR (L3) tubeless tires
4A-64
Performance Data WHEEL LOADERS
Dimensions
WA180-3 (Canada source)
Unit: mm (ft.in)
17.5-25-12PR (L-2)
Tread 1820 (6'0")
45 Width over tires 2260 (7'5")
K A Wheelbase 2672 (8'10")
J
B
F G B Hinge pin height, max. height 3595 (11'10")
H
48 C Hinge pin height, carry position 380 (1'3")
E
C D D Ground clearance 425 (1'5")
A E Hitch height 815 (2'8")
L
FVBH0030
F Overall height, top of the stack 2995 (9'10")
G Overall height, ROPS cab 3095 (10'2")
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires & Options
kg (lb) Straight Full Turn
Deduct Additional Counterweight 280 (620) 520 (1150) 450 (990)
Remove ROPS Cab 500 (1100) 460 (1010) 400 (880)
Install ROPS Canopy [250kg (550lb)] 180 (395) 230 (510) 200 (440)
Tip Type Bucket Teeth (instead of bolt-on cutting edge) 50 (110) +65 (+140) +55 (+120)
15.5-25-12PR (L2) tubeless tires 120 (265) 90 (200) 80 (175)
17.5-25-12PR (L3) tubeless tires +40 (+88) +30 (+66) +25 (+55)
4A-65
Performance Data WHEEL LOADERS
Dimensions
WA250-3 (Canada source)
Unit: mm (ft.in)
17.5-25-12PR (L-2)
Tread 1930 (6'4")
45 Width over tires 2465 (8'1")
K A Wheelbase 2900 (9'6")
J
B
F G B Hinge pin height, max. height 3770 (12'4")
H
48 C Hinge pin height, carry position 465 (1'6")
E
C D D Ground clearance 465 (1'6")
A E Hitch height 980 (3'3")
L
FVBH0030
F Overall height, top of the stack 3145 (10'4")
G Overall height, ROPS canopy 3265 (10'9")
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires & Options
kg (lb) Straight Full Turn
Remove ROPS Cab 520 (1150) 450 (990) 395 (870)
Install ROPS Canopy [280kg (620lb)] 240 (530) 210 (460) 185 (410)
17.5-25-12PR (L3) tubeless tires +40 (+90) +30 (+65) +25 (+55)
20.5-25-12PR (L2) tubeless tires +330 (+730) +250 (+550) +220 (+490)
20.5-25-12PR (L3) tubeless tires +420 (+930) +330 (+730) +290 (+640)
4A-66
Performance Data WHEEL LOADERS
Dimensions
WA320-3 (Canada source)
Unit: mm (ft.in)
20.5-25-12PR (L-2)
Tread 2050 (6'9")
45 Width over tires 2585 (8'6")
K A Wheelbase 3030 (9'11")
J
B
F G B Hinge pin height, max. height 3885 (12'9")
H
48 C Hinge pin height, carry position 450 (1'6")
E
C D D Ground clearance 400 (1'4")
A E Hitch height 1190 (3'11")
L
FVBH0030
F Overall height, top of the stack 3220 (10'5")
G Overall height, ROPS canopy 3315 (10'10")
Weight Changes
Change in Operating Change in Tipping Load kg (lb)
Tires & Options
Weight kg (lb) Straight Full Turn
165 (364) 130 (287) 115 (254)
17.5-25-12PR (L2)
w/ballast* +30 (+70) 140 (310) 85 (187)
55 (120) 45 (100) 40 (90)
17.5-25-12PR (L3)
w/ballast* +140 (+310) 55 (120) 10 (20)
0 0 0
20.5-25-12PR (L2)
w/ballast** +350 (+770) +225 (+496) +235 (+520)
+185 (+410) +145 (+320) +130 (+290)
20.5-25-12PR (L3)
w/ballast** +535 (+1180) +370 (+820) +365 (+800)
Additional Counterweight (removed) 325 (720) 830 (1830) 690 (1520)
ROPS Canopy (instead of ROPS Cab) 170 (375) 155 (340) 120 (265)
* 520kg (1150lb) ballast used instead of additional counterweight
** 675kg (1490lb) ballast used instead of additional counterweight
4A-67
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (Canada source)
Unit: mm (ft.in)
23.5-25-16PR (L-3)
Tread 2160 (7'1")
45
Width over tires 2780 (9'1")
K A Wheelbase 3300 (10'10")
J
B B Hinge pin height, max. height 4095 (13'5")
H F G
52
C Hinge pin height, carry position 520 (1'8")
E D Ground clearance 460 (1'6")
C D
E Hitch height 1150 (3'9")
A
L F Overall height, top of the stack 2950 (9'8")
G Overall height, ROPS cab 3380 (11'1")
Weight Changes
Operating weight Tipping load; straight Tiipping load; full turn
kg lb kg lb kg lb
Remove ROPS cab 660 1,455 650 1,433 625 1,378
Remove additional counterweight 325 717 860 1,896 715 1,577
Install ROPS canopy 430 950 425 937 410 904
4A-68
Performance Data WHEEL LOADERS
Dimensions
WA420-3 (Canada source)
Unit: mm (ft.in)
26.5-25-20PR (L3)
Tread 2250 (7'5")
45 Width over tires 2950 (9'8")
K
J A Wheelbase 3300 (10'10")
B
H F G B Hinge pin height, max. height 4315 (14'2")
48 C Hinge pin height, carry position 495 (1'7")
E D Ground clearance 525 (1'9")
C D
A E Hitch height 1240 (4'1")
L F Overall height, top of the stack 3405 (11'2")
FVBH0030
G Overall height, ROPS canopy 3445 (11'4")
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires and Options kg (lb) Straight Full Turn
No Ballast Ballast No Ballast Ballast No Ballast Ballast
23.5-25-16PR (L-2) tires 760 (1,675) 25 (55)* 590 (1,300) +140 (+310)* 510 (1,125) +160 (+350)*
23.5-25-16PR (L-3) tires 390 (860) +345 (+760)* 300 (660) +435 (+960)* 260 (575) +420 (+925)*
23.5-25-20PR (L-2) tires 700 (1,545) +35 (+75)* 540 (1,190) +185 (+405)* 470 (1,035) +200 (+440)*
23.5-25-20PR (L-3) tires 445 (980) +280 (+620)* 300 (660) +440 (+970)* 265 (580) +425 (+940)*
26.5-25-16PR (L-2) tires 80 (175) +985 (+2,170)** 50 (130) +1200 (+2,650)** 50 (110) +1090 (+2,400)**
26.5-25-20PR (L-3) tires 0 +1055 (+2,330)** 0 +1255 (+2,770)** 0 +1140 (+2,510)**
Remove additional
325 (720) 325 (720) 830 (1,830) 830 (1,830) 720 (1,650) 720 (1,650)
counterweight
* 1050 kg (2,315 lbs) ballast used instead of additional counterweight
** 1380 kg (3,040 lbs) ballast used instead of additional counterweight
4A-69
Performance Data WHEEL LOADERS
Dimensions
WA450-5 (Canada source)
Unit: mm (ft.in)
26.5-25-20PR (L3)
Tread 2300 (7'7")
45 Width over tires 3010 (9'11")
K A Wheelbase 3450 (11'4")
J
B
F G B Hinge pin height, max. height 4360 (14'4")
H
50 C Hinge pin height, carry position 585 (1'11")
E
C D D Ground clearance 525 (1'9")
A E Hitch height 1240 (4'1")
L F Overall height, top of the stack 3080 (10'2")
G Overall height, ROPS canopy 3460 (11'5")
Weight Changes
4A-70
Performance Data WHEEL LOADERS
Dimensions
WA480-5 (Canada source)
Unit: mm (ft.in)
26.5-25-20PR (L3)
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45 A Wheelbase 3450 (11'4")
K
B
J B Hinge pin height, max. height 4505 (14'9")
H F G C Hinge pin height, carry position 585 (1'11")
52
E
D Ground clearance 525 (1'9")
C D E Hitch height 1240 (4'1")
A F Overall height, top of the stack 3080 (10'1")
L
G Overall height, ROPS cab 3500 (11'6")
General Excavating
Purpose
Bucket Type
Bolt-on Cutting Teeth and Teeth
Edge Segment Edge
Heaped m3 (cu.yd) 4.6 (6.0) 4.1 (5.4) 3.8 (5.0)
Bucket Capacity
Struck m3 (cu.yd) 4.0 (5.2) 3.5 (4.6) 3.2 (4.2)
Bucket Width mm (ft.in) 3170 (10'5") 3190 (10'6") 3190 (10'6")
Bucket Weight kg (lb) 2260 (4,982) 2255 (4,971) 2125 (4,685)
Straight kg (lb) 20250 (44,644) 20155 (44,434) 20285 (44,721)
Static Tipping Load
Full turn (40) kg (lb) 17590 (38,779) 17500 (38,581) 17630 (38,868)
H.Dumping clearance, max. height and 45 dump angle mm (ft.in) 3205 (10'6") 3170 (10'5") 3170 (10'5")
Reach at 2130 mm (7') cutting edge clearance and 45
dump angle
mm (ft.in) 2135 (7'0") 2080 (6'10") 2135 (7'0")
J. Reach at max. height and 45 dump angle mm (ft.in) 1420 (4'8") 1420 (4'8") 1420 (4'8")
Reach with arm horizontal and bucket level mm (ft.in) 3020 (9'11") 2895 (9'6") 3050 (10'0")
K. Operating Height (fully raised) mm (ft.in) 6175 (20'3") 6025 (19'9") 6025 (19'9")
L. Overall Length Bucket on ground mm (ft.in) 9155 (30'0") 9185 (30'2") 9185 (30'2")
Turning Radius (bucket at carry, outside corner of bucket) mm (ft.in)
0 mm (ft.in) 90 (3.5") 110 (4.3") 110 (4.3")
Digging Depth
10 mm (ft.in) 355 (1'2") 380 (1'3") 380 (1'3")
Breakout Force kN (lb) 212 (47,658) 237 (53,278) 249 (55,975)
Operating Weight kg (lb) 24545 (54,113) 24420 (53,837) 24290 (53,550)
Weight Changes
4A-71
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (USA source)
Unit: mm (ft.in)
29.5-25-22/PR(L-3)
Tread 2400 (7'10")
Width over tires 3190 (10'6")
A Wheelbase 3600 (11'10")
B Hinge pin height, max. height 4500 (14'9")
C Hinge pin height, carry position 565 (1'10")
D Ground clearance 450 (1'5')
E Hitch height 1240 (4'1")
F Overall height, top of the stack 3705 (12'2")
G Overall height, ROPS canopy 3860 (12'8")
All specs. are with teeth and 29.5-25-22/PR(L-3) tires, steel cab, ROPS canopy, lubricant, full fuel and
operator.
Standard Boom
General Purpose Loose Material Highlift Boom
Bucket Type Straight Edge General Purpose
Straight Edge
w/Bolt On Straight Edge
w/B.O.C. Cutting Edge W/BOCE
SAE Rated m3 (cu.yd) 5.0 (6.5) 5.5 (7.2) 4.28 (5.6)
Bucket Capacity
Struck m3 (cu.yd) 4.6 (6.0) 5.1 (6.6) 3.6 (4.7)
Bucket Width mm (ft.in) 3400 (11'2") 3400 (11'2") 3400 (11'2")
Bucket Weight kg (lb) 2760 (6,072) 2923 (6,445) 2190 (4,828)
Straight kg (lb) 24000 (52,920) 23728 (52,322) 21765 (47,984)
Static Tipping Load
Full turn (40) kg (lb) 20602 (45,427) 20376 (44,928) 18800 (41,447)
Dumping clearance, max. height and 45 dump angle mm (ft.in) 3170 (10'5") 3095 (10'2") 3700 (12'2")
Reach at 2130 mm (7') cutting edge clearance and
45 dump angle
mm (ft.in) 2025 (6'8") 2108 (6'11") 2430 (8'0")
Reach at max. height and 45 dump angle mm (ft.in) 1365 (4'6") 1448 (4'9") 1448 (4'9")
Height to hinge pin (fully raised) mm (ft.in) 3760 (12'4") 3910 (12'10") 3890 (12'9")
Operating Height (fully raised) mm (ft.in) 6175 (20'3") 6198 (20'4") 6520 (21'5")
Overall Length Bucket at carry mm (ft.in) 9105 (29'10") 9195 (30'2") 9790 (32'1")
Turning Radius (bucket at carry, outside corner of
bucket)
mm (ft.in) 7315 (24') 7366 (24'2") 7390 (24'2")
0 mm (ft.in) 150 (6") 94 (3.7") 145 (5.7")
Digging Depth
10 mm (ft.in) 375 (1'3") 384 (15.1") 365 (14.4")
Breakout Force kg (lb) 23700 (52,259) 21542 (47,500) 28450 (62,721)
Operating Weight** kg (lb) 30440 (67,120) 30609 (67,493) 30665 (67,605)
Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE
standard J-732 and J-742b.
Static tipping load and operating weight shown include lubricants, coolant, full fuel tank, ROPS cab, front fenders, optional
counterweight, 29.5-25-22PR (L3) tubeless tires and operator.
Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Do not use tire ballast with optional counterweight.
B.O.C.= Bolt on Cutting Edge
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires & Options kg (lb) Straight Full Turn
Remove Steel Cab 305 (670) 260 (570) 250 (550)
Deduct Additional Counterweight 1000 (2200) 2400 (5280) 2000 (4400)
4A-72
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (USA source)
Unit: mm (ft.in)
35/65-33
Tread 2650 (8'8")
Width over tires 3570 (11'9")
A Wheelbase 4100 (13'5")
B Hinge pin height, max. height 5155 (16'11")
C Hinge pin height, carry position 670 (2'2")
D Ground clearance 495 (1'7")
E Hitch height 1295 (4'3")
F Overall height, top of the stack 4125 (13'6")
G Overall height, ROPS canopy 4250 (13'11")
All specs. are with teeth and 35/65-33-24PR(L-4) tires, steel cab, ROPS canopy, lubricant, full fuel and
operator.
Boom Standard Boom
Bucket Type Straight Edge Spade-Nose
Excavation w/ Load and Carry w/
Tooth Type
Teeth Teeth
SAE Rated m3 (cu.yd) 6.1 (8.0) 7.5 (9.8)
Bucket Capacity
Struck m3 (cu.yd) 5.1 (6.7) 6.8 (8.9)
Bucket Width mm (ft.in) 3685 (12'1") 3685 (12'1")
Straight kg (lb) 33300 (73,414) 38900 (85,760)
Static Tipping Load
Full turn (40) kg (lb) 29410 (64,838) 34300 (75,619)
Dumping clearance, max. height and 45 dump angle mm (ft.in) 3350 (11'0") 3350 (11'0")
Reach at 2130 mm (7') cutting edge clearance and
45 dump angle
mm (ft.in) 2790 (9'2") 2920 (9'7")
Reach at max. height and 45 dump angle mm (ft.in) 1990 (6'6") 2580 (8'6")
Height to hinge pin (fully raised) mm (ft.in) 5155 (16'11") 5155 (16'11")
Operating Height (fully raised) mm (ft.in) 7165 (23'6") 7065 (23'2")
Bucket at ground mm (ft.in) 11396 (37'5") 11404 (37'5")
Overall Length
Bucket at carry mm (ft.in) 11196 (36'9") 11395 (35'5")
Turning Radius (bucket at carry, outside corner of
bucket)
mm (ft.in) 8260 (27'1") 8225 (27'0")
0 mm (ft.in) 50 (2") 105 (4")
Digging Depth
10 mm (ft.in) 470 (1.6") 505 (1'8")
Breakout Force (bucket cylinder) kg (lb) 37653 (83,010) 35400 (78,022)
Operating Weight** kg (lb) 46200 (101,854) 49400 (108,908)
Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE
standard J-732 and J-742b.
Static tipping load and operating weight shown include 35/65-33-24PR(L-4) tires, enclosed cab, ROPS canopy, lubricant, full fuel tank,
and operator.
Machine stability and operating weight are affected by counterweight, tire size and other weight changes to operate weights and
static tipping load.
4A-73
Performance Data WHEEL LOADERS
Dimensions
WA700-3 (USA source)
Unit: mm (ft.in)
40/65-39-36 PR (L-5) tires
Tread 3000 (9'10")
45 Width over tires 4040 (13'3")
K J A Wheelbase 4800 (15'9")
B 50 B Hinge pin height, max. height 5990 (19'8")
H FG
C Hinge pin height, carry position 720 (2'4")
C E D Ground clearance 540 (1'9")
D
E Hitch height 1530 (5'0")
A
L F Overall height, top of the stack 4580 (15')
FVBH0019
G Overall height, ROPS canopy 4790 (15'9")
4A-74
Performance Data WHEEL LOADERS
Dimensions
WA800-3 (USA source)
Unit: mm (ft.in)
45/65-45
Tread 3350 (11')
45 Width over tires 4585 (15'1")
K J A Wheelbase 5450 (17'11")
B 50 B Hinge pin height, max. height 7265 (23'10")
H FG
C Hinge pin height, carry position 850 (2'9")
C E D Ground clearance 550 (1'10")
D
E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5130 (16'10")
FVBH0019
G Overall height, ROPS canopy 5275 (17'4")
4A-75
Performance Data WHEEL LOADERS
Dimensions
WA900-3 (USA source)
Unit: mm (ft.in)
45/65-45-Tires
Tread 3350 (11')
45 Width over tires 4585 (15'1")
K J A Wheelbase 5450 (17'11")
B 50 B Hinge pin height, max. height 6960 (22'10")
H FG
C Hinge pin height, carry position 800 (2'7")
C E D Ground clearance 550 (1'10")
D
E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5130 (16'10")
FVBH0019
G Overall height, ROPS canopy 5275 (17'4")
4A-76
Performance Data WHEEL LOADERS
Dimensions
WA65-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.7 1850 285 4060
I General purpose bucket with teeth
(0.92) (6'1") (628) (8955)
1.0 2100 380 3500
II Light-material bucket
(1.3) (6'11") (838) (7718)
0.55 1850 485 3665
III Mult-purpose bucket with teeth
(0.72) (6'1") (1070) (8080)
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
4A-77
Performance Data WHEEL LOADERS
Dimensions
WA75-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.8 1950 335 4960
I General purpose bucket with teeth
(1.04) (6'5") (739) (10935)
1.0 2100 380 4480
II Light-material bucket
(1.3) (6'11") (838) (9875)
1.25 2100 410 3880
III Light-material bucket
(1.64) (6'11") (904) (8550)
0.75 2000 660 4215
IV Multi-purpose bucket with teeth
(0.98) (6'7") (1455) (9293)
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
A Overall length mm (ft.in) 5390 (17'8") 5480 (18'0") 5545 (18'2") 5530 (18'2")
B Wheelbase mm (ft.in) 2000 (6'7") 2000 (6'7") 2100 (6'7") 2000 (6'7")
C Bucket width mm (ft.in) 1950 (6'5") 2100 (6'11") 2000 (6'7") 2000 (6'7")
D Width over tires mm (ft.in) 1915 (6'3") 1915 (6'3") 1915 (6'3") 1915 (6'3")
E Tread mm (ft.in) 1550 (5'1") 1550 (5'1") 1550 (5'1") 1550 (5'1")
F Ground clearance mm (ft.in) 460 (1'6") 460 (1'6") 460 (1'6") 460 (1'6")
H Overall height mm (ft.in) 2650 (8'8") 2650 (8'8") 2650 (8'8") 2650 (8'8")
R Turning radius mm (ft.in) 4210 (13'10") 4325 (14'2") 4350 (14'3") 4250 (13'11")
4A-78
Performance Data WHEEL LOADERS
Dimensions
WA85-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.9 2050 380 4960
I General purpose bucket with teeth
(1.18) (6'9") (838) (10930)
1.0 2100 385 4480
II General purpose bucket with teeth
(1.3) (6'11") (849) (9880)
1.25 2100 410 3880
III Light-material bucket
(1.64) (6'11") (904) (8550)
0.75 2000 660 4215
IV Multi-purpose bucket with teeth (0.98) (6'7") (1455) (9290)
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
A Overall length mm (ft.in) 5410 (17'9") 5470 (17'11") 5535 (18'2") 5500 (18'1")
B Wheelbase mm (ft.in) 2000 (6'7") 2000 (6'7") 2000 (6'7") 2000 (6'7")
C Bucket width mm (ft.in) 2050 (6'9") 2100 (6'11") 2100 (6'11") 2000 (6'7")
D Width over tires mm (ft.in) 1950 (6'5") 1950 (6'5") 1950 (6'5") 1950 (6'5")
E Tread mm (ft.in) 1550 (5'1") 1550 (5'1") 1550 (5'1") 1550 (5'1")
F Ground clearance mm (ft.in) 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7")
H Overall height mm (ft.in) 2670 (8'9") 2670 (8'9") 2670 (8'9") 2670 (8'9")
R Turning radius mm (ft.in) 4260 (14'0") 4325 (14'2") 4350 (14'3") 4250 (13'11")
4A-79
Performance Data WHEEL LOADERS
Dimensions
WA90-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
1.0 2100 380 7400
I General purpose bucket with teeth (1.31) (6'11") (838) (16310)
1.1 2150 390 7400
II General purpose bucket with teeth
(1.44) (7'1") (860) (16310)
1.25 2100 410 6380
III Light-material bucket (1.63) (6'11") (904) (14070)
IV Light-material bucket with teeth 1.6 2100 420 5330
(2.09) (6'11") (926) (11750)
V Multi-purpose bucket with teeth 0.9 2110 670 7070
(1.2) (6'11") (1480) (15590)
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
A Overall length mm (ft.in) 5600 (18'4") 5600 (18'4") 5720 (18'9") 5915 (19'5") 5750 (18'10")
B Wheelbase mm (ft.in) 2150 (7'1") 2150 (7'1") 2150 (7'1") 2150 (7'1") 2150 (7'1")
C Bucket width mm (ft.in) 2100 (6'11") 2150 (7'1") 2100 (6'11") 2100 (6'11") 2110 (6'11")
D Width over tires mm (ft.in) 2010 (6'7") 2010 (6'7") 2010 (6'7") 2010 (6'7") 2010 (6'7")
E Tread mm (ft.in) 1590 (5'3") 1590 (5'3") 1590 (5'3") 1590 (5'3") 1590 (5'3")
F Ground clearance mm (ft.in) 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7")
H Overall height mm (ft.in) 2720 (8'11") 2720 (8'11") 2720 (8'11") 2720 (8'11") 2720 (8'11")
R Turning radius mm (ft.in) 4435 (14'7") 4455 (14'7") 4490 (14'9") 4550 (14'11") 4450 (14'7")
4A-80
Performance Data WHEEL LOADERS
Dimensions
WA95-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
1.1 2150 390 7400
I General purpose bucket with teeth (1.4) (7'1") (860) (16310)
1.6 2100 420 5330
II Light-material bucket
(2.01) (6'11") (926) (11750)
0.9 2110 670 7070
III Multi-purpose bucket with teeth (1.2) (6'11") (1480) (15590)
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
4A-81
Performance Data WHEEL LOADERS
Dimensions
WA115-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
1.3 2300 555 7475
I Universal bucket without teeth (1.7) (7'7") (1225) (16480)
1.2 2300 810 7290
II Multi purpose buket without teeth
(1.6) (7'7") (1785) (16075)
1.5 2310 600 6885
III Stock pile bucket without teeth (2.0) (7'7") (1325) (15175)
IV Light materials bucket without teeth 2.2 2500 875 5405
(2.9) (8'2") (1930) (11915)
Operating weight
kg/lb
Tires/Buckets I II III IV
455/70 R24 SPT 9 7455 (16435) 7735 (17055) 7560 (16665) 7800 (17195)
Weight Changes
Operating weight Tipping load straight Tipping load full turn Overall length
Tires & Options
kg lb kg lb kg lb mm inch
Additional counterweight +305 +670 +725 +1600 +520 +1150
Equipment with teeth +100 +220 -60 -130 -115 -250 +65 2.6"
4A-83
Performance Data WHEEL LOADERS
Dimensions
WA320-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
2.6 2740 1225 13150
I Standard bucket with teeth (3.4) (9') (2701) (29000)
2.7
II Bulk-material bucket with bolt-on cutting edges
(3.5)
2.9 2740 1301 12640
III Standard bucket with teeth (3.8) (9') (2869) (27900)
IV Bulk-material bucket with bolt-on cutting edges 3.0
(3.9)
V Light-material bucket with bolt-on cutting edges 3.8
(5.0)
4A-84
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (Germany source)
* Excluding tire protectors
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII VIII IX
17875 18090 17875 18090 17985 18200 18105 18320 18285
23.5-R25 L3 (39410) (39880) (39410) (39880) (39650) (40125) (39945) (40390) (40310)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+325 +715 +860 +1896 +715 +1576 +146 +5.7
Equipment with teeth +100 +220 -100 -220 -110 -243
4A-85
Performance Data WHEEL LOADERS
Dimensions
4A-86
Performance Data WHEEL LOADERS
Dimensions
WA400-5 (Germany source)
* Excluding tire protectors
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII VIII IX X
750/65 R25 18610 18840 18610 18840 18800 19020 18900 19125 18965 19165
(41030) (41535) (41030) (41535) (41445) (41930) (41665) (42165) (41810) (42915)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+325 +715 +830 +1830 +700 +1545 +146 +5.7
Equipment with teeth +100 +220 -100 -220 -110 -243
4A-87
Performance Data WHEEL LOADERS
Dimensions
4A-88
Performance Data WHEEL LOADERS
Dimensions
WA470-5 (Germany source)
* Excluding tire protectors
Operating weight
kg/lb
Tires/Buckets I II III IV V VI VII VIII IX X
26.5-R25 L3 23135 22775 22975 23435 23425 23192 23195 23225 23535 23285
(51000) (50210) (50650) (51665) (51645) (51130) (51135) (51200) (51885) (51335)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+400 +882 +1030 +2271 +860 +1896 +190 +7.5
Equipment with teeth +140 +309 -140 -309 -140 -309
4A-89
Performance Data WHEEL LOADERS
Dimensions
4A-90
Performance Data WHEEL LOADERS
Dimensions
WA480-5 (Germany source)
* Excluding tire protectors
Operating weight
kg/lb
Tires/Bucket I II III IV V VI VII VIII IX X XI XII XIII
25755 25460 25653 25595 25788 25735 25928 25510 25703 25725 25913 25660 25860
26.5-R25 L3
(56780) (56130) (56555) (56425) (56850) (56735) (57160) (56240) (56665) (56715) (57130) (56570) (57010)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+400 +882 +950 +2094 +790 +1742 +190 +7.5
Equipment with teeth +140 +309 -140 -309 -140 -309
4A-91
Performance Data WHEEL LOADERS
Dimensions
4A-92
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (Germany source)
* Excluding tire protectors
Operating weight
kg/lb
Tires/Bucket I II III IV V
29.5-R25 L3 29360 (64725) 29470 (64970) 29570 (65190) 29820 (65740) 30020 (66180)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+1000 +2205 +1900 +4189 +1600 +3527 +141 +5.6
Tire inflation (29.5-R25) +1900 +4189 +2820 +62174 +2435 +5368
Equipment with teeth +250 +551 -250 -551 -270 -595
4A-93
Performance Data WHEEL LOADERS
Dimensions
Buckets I II III IV V
(Capacities in accordance with ISO 7546) 4.5 5.0 5.5 4.5 5.0
m3 (yd3) (5.9) (6.5) (7.2) (5.9) (6.5)
1274 1323 1415 1486 1535
a Reach at 45 mm (ft.in) (4'2") (4'4") (4'8") (4'11") (5')
3251 3195 3103 3039 2983
b Dump height at 45 mm (ft.in)
(10'8") (10'6") (10'2") (10') (9'9")
c Hinge pin height mm (ft.in) 4496 4496 4496 4496 4496
(14'9") (14'9") (14'9") (14'9") (14'9")
d Height top edge of bucket mm (ft.in) 6072 6160 6263 6229 6160
(19'11") (20'3") (20'7") (20'5") (20'3")
e Dig depth mm (ft.in) 124 124 124 124 124
(4'9") (4'9") (4'9") (4'9") (4'9")
f Overload height mm (ft.in) 4105 4105 4105 4105 4105
(13'6") (13'6") (13'6") (13'6") (13'6")
9127 9197 9328 9427 9497
A Overal length, bucket grounded mm (ft.in)
(29'11") (30'2") (30'7") (30'11") (31'2")
3600 3600 3600 3600 3600
B Wheelbase mm (ft.in) (11'10") (11'10") (11'10") (11'10") (11'10")
C Bucket width mm (ft.in) 3460 3460 3460 3460 3460
(11'4") (11'4") (11'4") (11'4") (11'4")
D Width over tires mm (ft.in) 3190 3190 3190 3190 3190
(10'6") (10'6") (10'6") (10'6") (10'6")
E Track width mm (ft.in) 2400 2400 2400 2400 2400
(7'10") (7'10") (7'10") (7'10") (7'10")
F Ground clearance mm (ft.in) 450 450 450 450 450
(1'6") (1'6") (1'6") (1'6") (1'6")
3650 3650
G Width over stone deflectors mm (ft.in)
(12') (12')
3860 3860 3860 3860 3860
H Overal height mm (ft.in)
(12'8") (12'8") (12'8") (12'8") (12'8")
4A-94
Performance Data WHEEL LOADERS
Dimensions
WA320-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
2.3 2.0 2760 13050
I General-purpose bucket with teeth (3.0) (2.6) (9'1") (28770)
II General-purpose bucket with bolt-on cutting edges;
2.5 2.3
(Loading and excavating of soil, sand and variety of
(3.3) (3.0)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab 310 (683)
Unit: mm (ft.in)
20.5-25 tires
Tread 2050 (6'9")
Width over tires 2585 (8'6")
45
K A Wheelbase 3030 (9'11")
J
B B Hinge pin height, max. height 3885 (12'9")
F G
H C Hinge pin height, carry position 450 (1'6")
48
E D Ground clearance 400 (1'4")
C D
E Hitch height 1190 (3'11")
A
L F Overall height, top of the stack 3205 (10'6")
FVBH0030
G Overall height, ROPS cab 3335 (10'11")
4A-95
Performance Data WHEEL LOADERS
Dimensions
WA380-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.0 2.5 2915 17130
I General-purpose bucket with teeth (3.9) (3.3) (9'7") (37760)
II General-purpose bucket with bolt-on cutting edges;
3.1 2.7
(Loading and excavating of soil, sand and variety of
(4.0) (3.5)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab 310 (683)
Unit: mm (ft.in)
23.5-25 tires
Tread 2160 (7'1")
Width over tires 2780 (9'1")
45
K A Wheelbase 3200 (10'6")
J
B B Hinge pin height, max. height 4095 (13'5")
F G
H C Hinge pin height, carry position
48
E D Ground clearance 455 (1'6")
C D
E Hitch height 1150 (3'9")
A
L F Overall height, top of the stack 3345 (11'0")
FVBH0030
G Overall height, steel cab 3380 (11'1")
4A-96
Performance Data WHEEL LOADERS
Dimensions
WA420-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.5 3.0 3065 19940
I General-purpose bucket with teeth (4.6) (3.9) (10'1") (43960)
II General-purpose bucket with bolt-on cutting edges;
2.3
(Loading and excavating of soil, sand and variety of
(3.0)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab 310 (683)
Unit: mm (ft.in)
23.5-25 tires
Tread 2200 (7'3")
Width over tires 2820 (9'3")
45
K A Wheelbase 3300 (10'10")
J
B B Hinge pin height, max. height 4250 (13'11")
F G
H C Hinge pin height, carry position
48
E D Ground clearance 460 (1'6")
C D
E Hitch height 1175 (3'10")
A
L F Overall height, top of the stack 3340 (11'0")
FVBH0030
G Overall height, steel cab 3400 (11'2")
4A-97
Performance Data WHEEL LOADERS
Dimensions
WA470-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.9 3.3 3200 21000
I General-purpose bucket with teeth (5.1) (4.3) (10'6") (46300)
II General-purpose bucket with bolt-on cutting edges;
4.2 3.5
(Loading and excavating of soil, sand and variety of
(5.5) (4.6)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab 310 (683)
Unit: mm (ft.in)
26.5-25 tires
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45
K A Wheelbase 3400 (11'2")
J
B B Hinge pin height, max. height 4355 (14'3")
F G
H C Hinge pin height, carry position
48
E D Ground clearance 525 (1'9")
C D
E Hitch height 1240 (4'1")
A
L F Overall height, top of the stack 3470 (11'5")
FVBH0030
G Overall height, steel cab 3490 (11'5")
4A-98
Performance Curves WHEEL LOADERS
Travel Time Charts
Example:
Haul... Return...
Using the graph for the Loaded machine, read from Using the graph for the Empty machine, read from
the Travel Distance (one way) scale at 300 m (980 the Travel Distance (one way) scale at 400 m (1310
feet) across to the 6% total resistance line (point A). feet) across to the 2% total resistance line (point A).
From (point A) read down to the Travel Time (one From (point A) read down to the Travel Time (one
way) scale to determine haul time = 1.5 minutes. way) scale to determine haul time = 1.0 minutes
LOADED EMPTY
DISTANCE TRAVELED
2%
TOTAL RESISTANCE
DISTANCE TRAVELED
700
TOTAL RESISTANCE
700
2000 4%
2000 600 600
2% 6%
500 4% 500
1500 1500 A
400m 8%
400 6% 400
6%
300m A 8% 1000 300 10%
1000 300
10%
15%
200 15% 200 20%
500 20% 500
100 100
1.5 1.0
0 0 0 0
0 0.5 1.0 1.5 2.0 (Minutes) 0 0.5 1.0 1.5 2.0 (Minutes)
TIME TIME
p
4A-99
Performance Curves WHEEL LOADERS
Travel Time Charts
WA500-3 LOADED
(feet) (m)
1000
3000 900
800
2500 2%
TOTAL RESISTANCE
700
2000 600
4%
500
1500
6%
400
8%
1000 300 10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0274
WA500-3 EMPTY
(feet) (m)
1000
3000 900 2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700 4%
2000 600
6%
500
1500 8%
400 10%
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0273
4A-100
Performance Curves WHEEL LOADERS
Travel Time Charts
WA600-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700 2%
2000 600
500 4%
1500
400 6%
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0276
WA600-3 EMPTY
(feet) (m)
1000
3000 900
2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 4%
600
6%
500
1500
400 8%
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0275
4A-101
Performance Curves WHEEL LOADERS
Travel Time Charts
WA700-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 600
500 4%
1500
6%
400
8%
1000 300 10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0278
WA700-3 EMPTY
(feet) (m)
1000
3000 900
2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
4%
2000 600
500 6%
1500
8%
400
10%
1000 300
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0277
4A-102
Performance Curves WHEEL LOADERS
Travel Time Charts
WA800-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2%
2000 600
500 4%
1500
6%
400
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0280
WA800-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
2%
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600 4%
500
1500 6%
400
8%
1000 300 10%
15%
200
20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0279
4A-103
Performance Curves WHEEL LOADERS
Travel Time Charts
WA900-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 2%
600
500
1500 4%
400
6%
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0282
WA900-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
2%
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600
4%
500
1500
6%
400
8%
1000 300 10%
15%
200
20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0281
4A-104
Performance Curves WHEEL LOADERS
Travel Time Charts
WA1200-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 600
2%
500
1500
4%
400
1000 300 6%
8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0284
WA1200-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600 2%
500 4%
1500
400 6%
1000 300 8%
10%
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0283
4A-105
Definitions WHEEL LOADERS
1. OPERATING WEIGHT
The total mass in kilograms (pounds) of the machine as specified and fully serviced, including a full fuel
tank and 80 kg (175 Ib) operator.
The struck capacity is defined as the volume of material retained in the bucket after a heaped load is
struck by drawing a straight edge across the width of bucket with one end of the straight edge resting on
the cutting edge and the other end resting on the uppermost portion of the bucket back sheet or spill
guard. The struck capacity (Vs) can be expressed by the following equation:
2 2
Vs = AW ab
3
A = cross sectional area at the center of the TOP OF b
bucket, mm2 (in2.). SPILL b BIT W
GUARD 2
W = average inside width of the bucket, mm 2 2
1
(in.). HEAP 90 c 1
a
a = height of the spill guard at the center of
A
the bucket normal to the strike line, mm
(in.).
b = length of opening at the center of the
bucket, mm (in.). FVBH0009
b2W b2
Vh = Vs + (a+c)
8 6
Where c is the length on a normal to the strike line. On one end it is terminated by the assumed crest of
the material.
On the other end it is terminated by the intersection with a line from the bit or cutting edge tip to the base
of the spill guard.
This method applies primarily to irregular buckets having parallel sides and a cutting edge parallel to the
edge of the spill guard or back sheet. Moderately clipped spill guard corners will introduce no appreciable
errors.
3. RATED LOAD
The rated load (operating load) will not exceed 50% of the TIPPING LOAD for wheel loaders or 35% of the
TIPPING LOAD for crawler loaders, and will be considered as operating under the following conditions:
1. Lifting ability of the machine in all bucket positions to be no less than the specified operating load.
2. Bucket attachment of specified size and type.
3. Maximum travel speed of 6 km/h (3.7 mph).
4. Operating surface.
(a) Shall be hard, moderately smooth and level for wheel loaders.
(b) General operating conditions of crawler loaders are such that they normally are not operating on
hard, moderately smooth level surface.
For this reason, the rating on crawler loaders is set at the lower figure of 35%.
4. BREAKOUT FORCE
Breakout force in kilograms (and kilo-Newton or
pounds) is the maximum sustained vertical Breakout Force
upward force exerted 100 mm (4 in) behind the tip Bucket edge
of the bucket cutting edge and is achieved
through the ability to lift and/or roll-back the 4" (101.6mm)
bucket about the specified pivot point under the
following conditions:
Breakout force
(a) Machine with transmission in neutral. FVBH0010
(b) All brakes released.
(c) Unit at standard operating weight, rear of machine not tied down.
4A-106
Definitions WHEEL LOADERS
(d) Bottom of cutting edge parallel to and not more than 25 mm (1 in) above or below the ground line.
(e) When bucket circuit is used, the pivot point must be specified as the bucket hinge pin, and the unit
blocked under the bucket hinge pin pivot point in order to minimize linkage movement.
(f) When the lift circuit is used, the pivot point must be specified as the lift arm hinge pin.
Wheel loaders shall have front axle blocked to eliminate change in position of pivot pins due to tire
deflection.
(g) If both circuits are used simultaneously, the dominating pivot point listed in (e) or (f) must be specified.
(h) If the circuit used causes the rear of the machine to leave the ground then the vertical force value
required to raise the rear of the machine is the breakout force.
(i) For irregular shaped buckets, the tip of the bucket cutting edge, referred to above shall mean the
farthest forward point of the cutting edge.
6. LIFTING CAPACITY
The maximum mass in kilograms (pounds) at the
center of gravity of SAE rated load in the bucket
that can be lifted at a specified height with the Fixed
bucket positioned to retain maximum load under
the following conditions:
(a) Machine with rear end tied down.
(b) Machine at operating weight and equipment Lifting Capacity
as specified. FVBH0012
4A-107
Definitions WHEEL LOADERS
9. CARRY POSITION
The vertical distance from the ground in
millimeters (inches) to the centerline of the bucket
hinge pin, with the angle of approach at 15 B 15
degree.
4A-108
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
4A-109
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA320-3
WA250-3 WA250PT-3 WA320-3 WA380-5 WA380-3
CUSTOM
W/B.O.C 2.1 (2.75) 1.9 (2.5) 2.7 (3.55) 2.7 (3.55) 3.3 (4.3) 3.2 (4.2)
GENERAL PURPOSE
BUCKET W/teeth
(STOCKPILE) 1.9 (2.5) 2.5 (3.25) 2.5 (3.25) 3.1 (4.1) 3.0 (3.9)
W/segment
edge 2.7 (3.55) 3.2 (4.2)
W/B.O.C
1.9 (2.5) 2.3 (3.0) 2.9 (3.8) 2.8 (3.65)
GENERAL PURPOSE
W/teeth
BUCKET (EXCAVATING) 1.8 (2.35) 2.1 (2.75) 2.7 (3.5) 2.6 (3.4)
W/segment
edge 2.3 (3.0) 2.9 (3.8) 2.8 (3.65)
SPADE NOSE ROCK W/tip type
BUCKET teeth
W/B.O.C
LIGHT MATERIAL 2.7 (3.35) 3.2 (4.2) 4.0 (5.2) 4.0 (5.25)
BUCKET
BARE
2.5 (3.25) 3.0 (3.9) 3.8 (4.95)
LIGHT MATERIAL For multi-
BUCKET coupler 2.5 (3.25) 3.1 (4.0)
MULTI-PURPOSE
BUCKET 1.5 (1.95) 2.0 (2.6)
GENERAL PURPOSE W/B.O.C 1.9 (2.5) 2.3 (3.0) 2.8 (3.65)
BUCKET (STOCKPILE)
FOR HIGH LIFT BOOM W/teeth 1.8 (2.35) 2.1 (2.75) 2.6 (3.4)
GENERAL PURPOSE
BUCKET FOR SUPER W/B.O.C
HIGH LIFT
BOOM(STOCKPILE) W/teeth
HIGH LIFT BOOM
SUPER-HIGH LIFT BOOM
B.O.C (BOLT ON
CUTTING EDGE)
B.O.C, LONG LIFE
SEGMENT EDGE
Bolt-on teeth
Bolt-on teeth
for
limestone
TEETH
Bolt-on teeth
for long life
Tip type
teeth
LOG GRAPPLE Pin on type
LUMBER GRAPPLE
Pin-on type
DUMPING FORK
Multi-coupler
Pin-on type
LUMBER FORK
Multi-coupler
EXTENSION FORK
Mech. type
MULTI-COUPLER
Hyd. type
Additional
COUNTERWEIGHT
For log & fork
4A-110
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA420-3 WA430-5 WA450-5 WA470-5 WA470-3 WA480-5
W/B.O.C 3.7 (4.85) 3.7 (4.8) 4.2 (5.5) 4.2 (5.5) 4.2 (5.5) 4.6 (6.0)
GENERAL PURPOSE BUCKET W/teeth
(STOCKPILE) 3.5 (4.6) 3.5 (4.6) 3.9 (5.1) 3.9 (5.1) 4.3 (5.6)
W/segment edge 3.7 (4.85) 4.2 (5.5)
W/B.O.C 3.3 (4.3) 3.3 (4.3) 3.9 (5.0) 3.8 (5.0) 3.8 (4.95) 4.1 (5.4)
GENERAL PURPOSE BUCKET W/teeth
(EXCAVATING) 3.1 (4.0) 3.1 (4.1) 3.6 (4.7) 3.6 (4.7) 3.6 (4.7) 3.8 (5.0)
W/segment edge 3.3 (4.3) 3.8 (5.0) 3.8 (4.95) 4.1 (5.4)
W/B.O.C 3.3 (4.3) 3.8 (4.95)
GENERAL PURPOSE BUCKET FOR HIGH
LIFT BOOM (STOCKPILE) W/teeth 3.1 (4.0) 3.6 (4.7)
W/O teeth
4A-111
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA500-3 WA600-3 WA700-3 WA800-3
W/B.O.C 5.0 (6.5)
GENERAL PURPOSE BUCKET (STOCKPILE) W/teeth 4.7 (6.1) 9.4 (12.3)
W/segment edge 9.4 (12.3)
W/B.O.C 4.5 (5.9) 6.4 (8.4)
GENERAL PURPOSE BUCKET (EXCAVATING) W/teeth 4.3 (5.6) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
W/segment edge 4.5 (5.9) 8.7 (11.4)
W/B.O.C
GENERAL PURPOSE BUCKET FOR HIGH LIFT BOOM W/teeth 4.2 (5.5) 5.6 (7.3)
(STOCKPILE)
W/O teeth 5.6 (7.3)
W/B.O.C 4.2 (5.5)
GENERAL PURPOSE BUCKET (EXCAVATING) FOR HIGH W/teeth
LIFT STRAIGHT EDGE 4.0 (5.25) 5.6 (7.3)
W/segment edge 4.2 (5.5)
W/B.O.C
LOOSE MATERIAL BUCKET
BARE
W/B.O.C 5.5 (7.15)
LIGHT MATERIAL BUCKET
BARE 5.2 (6.8)
W/tip type teeth 4.3 (5.6) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
SPADE NOSE ROCK BUCKET
(V-EDGE)
W/O teeth 4.3 (5.6) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
W/ teeth 12.3(16.1)
SPADE NOSE STOCK
PILE
W/B.O.C 11.0(14.4)
W/tip type teeth 5.6 (7.3) 10.0(13.1)
SPADE NOSE ROCK BUCKET
(V-EDGE) FOR HIGH LIFT BOOM
W/O teeth 5.6 (7.3)
SPADE NOSE ROCK BUCKET (V-EDGE) FOR LOAD & Tip type teeth with
CARRY SPECS, WITH SHORT ARM. Weld-on 7.5 (9.8) 14 (18.3)
HEAVY-DUTY BUCKET W/teeth
(STRAIGHT EDGE) W/O teeth
W/teeth bolt on
HEAVY-DUTY BUCKET segments 4.5 (5.9) 8.7 (11.4) 11.0 (14.4)
(SPADE NOSE)
W/O teeth
W/B.O.C
BUCKET FOR TWO-WAY DUMP
W/O teeth
COAL BUCKET 11.0(14.4) 20.5(26.8)
HIGH LIFT BOOM *3 *4 *5
SHORT For load & carry specs. *6 *7
BOOM For stone handling specs.
BOC(BOLT ON CUTTING EDGE)
BOC, LONG LIFE
SEGMENT EDGE
Bolt-on teeth
Bolt-on teeth for long life
Bolt-on teeth for limestone
Tip type bolt on
TEETH Tip type teeth for semi-long
Tip type weld on
Tip type weld on (sharp)
Tip type teeth for long life
Tip type teeth for limestone (sharp)
LOG GRAPPLE *8
LOG-LUMBER FORK
LOG-LUMBER GRAPPLE
PIPE GRAPPLE
ROLLING GUSSET
Additional
For log & fork ATT.
COUNTER- For high lift boom
WEIGHT
For load & carry specs, with short boom
For stone handling specs,with short boom
*3 : Install the 4.2 m33 (5.5 cu.yd) general purpose bucket and counterweight for high lift boom.
*4 : Install the 5.6 m (7.3 cu.yd) general purpose bucket and counterweight for high lift boom.
*5 : Install the 10.0 m 3
(13.1 cu.yd) bucket and additional counterweight.
*6 : Install the 7.5 m3 (9.8 cu.yd) spade nose bucket and counterweight for load & carry specs.
*7 : Install the 14.0 m3 (18.3 cu.yd) spade nose bucket and additional counterweight.
*8 : Install the counterweight for log & fork attachments.
4A-112
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA900-3 WA1200-3
GENERAL PURPOSE W/B.O.C
BUCKET
(STOCKPILE) W/teeth
4A-113
Bucket Features WHEEL LOADERS
5. Heavy-duty Bucket:
This bucket is used for digging and loading blasted rock on rubble mounds and rock
crushing job sites. It has 1-class-larger teeth, and a large, thicker wear plate, large
corner edge/side guard, and strengthened spill guard.
NOTE: When installing this bucket on machines other than the WA700 or WA800, to
maintain the stability of the machine, please install an additional
counterweight and an orifice (or retainer) for reducing the dumping shock of
the bucket .
6. Chip Bucket:
This is a large bucket used for loading loose materials with low specific gravity [below
0.55 t/m3 (930 lb/cu.yd)], such as chips and grain. The back and top are made of a
wire mesh to reduce the weight. This bucket can demonstrate its power in bucket
operations in the paper-manufacturing business and sawmills.
7. Skeleton Bucket:
This bucket is used for digging and loading blasted rock on rubble mounds and rock
crushing job sites. It has a lattice structure allows it to sift out soil and small rocks,
thereby enabling it to select only the rock materials.
9. Multi-purpose Bucket:
This is a versatile bucket that performs scraping, dozing, scooping and various other
tasks in addition to excavating and loading jobs. It is especially suited to leveling work
and material transport.
4A-114
Teeth Features WHEEL LOADERS
FVBH0217
2. Bolt-on Teeth:
These teeth are suitable for loading or excavation of piles of earth or sand, blasted
rock, and jobs in the field that involve digging into the side of slopes. The special
heat treated, tensile strength steel alloy used in their production assures that they
will wear and have a long service life.
FVBH0218
3. Tip-type Teeth:
These teeth tips which are attached to an adapter that is welded or bolted to the
bucket edge. This means that an interchangeable part, the tooth tip, absorbs most
of the wear and protects the actual bucket edge. They give excellent performance
when used to handle blasted rock, piles of earth and similarly heavy duty tasks.
FVBH0219
FVBH0220
4A-115
Teeth Features WHEEL LOADERS
TOOTH SHAPES
Model 1 2 3 4 5 6 7 8 9 10
WA250, WA320
WA420, WA450
WA500, WA600
: Available
4A-116
Teeth Features WHEEL LOADERS
TOOTH SHAPES
Model 1 2 3 4 5 6 7 8 9 10
WA120
WA180, WA250
WA420, WA450
WA500
WA700
WA800, WA900
: Available
TOOTH SHAPES
Model 1 2 3
WA1200
: Available
4A-117
Teeth Features WHEEL LOADERS
4A-118
Bucket Selection WHEEL LOADERS
Coal bucket
Scooping of light material Light material bucket
Is size of material Yes
to A
40mm or smaller?
No
Consult Komatsu.
Excavating bucket
(straight ege)
No
Consult Komatsu.
Bucket capacity
m3
Bucket capacity is On the chart, draw a ver-
A tical line corresponding to
determined by using
a selection chart. the material density.
Optimum capacity
of bucket is one On the chart, draw a ver-
Is material Yes
B corresponding to tical line corresponding to
density 1.6
material density 1.6 the material density.
or more?
on a selection chart
or smaller bucket. No 3
Consult Komatsu. 1.6 1.8 kg/m3 x 1000
Material density
Optimum capacity
of bucket is one
corresponding to Is material On the chart, draw a ver-
Yes
C material density 1.8 density 1.8 tical line corresponding to
on a selection chart or more? the material density.
or smaller bucket.
No
Consult Komatsu. Select this capacity
bucket or smaller one.
4A-119
Bucket Selection WHEEL LOADERS
The appropriate bucket capacity for each model is determined in relation with the density of material that the
bucket carries.
The graphs are shown for the models WA120-3. The capacity of the currently available buckets for each
model are shown there. Komatsu can develop other sizes of buckets according to these graphs, if it is
requested through a distributor.
Bucket capacity in the graphs means SAE heaped capacity (Calculation method indicated on page 4A-88).
The line in the graph shows the case when the bucket fill factor is 100%.
WA120-3
Capacity
cu.yd m3
2.0 Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
Bucket capacity
2.25 1.7
cutting edge; (Loading and 1.4 1.2
excavating of soil, sand and variety of (1.85) (1.55)
other commonly handled materials)
1.85 1.4
II General-purpose bucket with teeth 1.3 1.1
1.7 1.3 (1.7) (1.45)
1.55 1.2 III Excavating bucket with bolt-on cutting 1.2 1.0
edges (1.55) (1.3)
1.0
1.2 1.4 1.6 1.8 2.0 2.2 2.4 IV Excavating bucket with teeth;
1.2 1.0
kg/m3 x 1000 (Loading and excavating of crushed (1.55) (1.3)
2 2.5 3 3.5 4 rock and blasted rock)
Material density
lb/cu.yd
V Light material bucket with bolt-on
cutting edges; (A lighter-weight, large- 1.7 1.5
(2.25) (1.95)
capacity bucket)
WA180-3
cu.yd m3 Capacity
2.3 Heaped Struck
2.9 2.2 m3
(cu.yd)
Bucket capacity
WA180PT-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and 1.7 1.4
excavating of soil, sand and variety of (2.25) (1.85)
other commonly handled materials)
II General-purpose bucket with teeth
III Excavating bucket with bolt-on cutting
edges
IV Excavating bucket with teeth;
(Loading and excavating of crushed
rock and blasted rock)
V Light material bucket with bolt-on
cutting edges; (A lighter-weight, large-
capacity bucket)
4A-120
Bucket Selection WHEEL LOADERS
WA250-3
cu.yd m3 Capacity
Heaped Struck
m3
3.53 2.2 (cu.yd)
Bucket capacity
WA250PT-3
cu.yd m3 Capacity
Heaped Struck
m3
3.53 2.2 (cu.yd)
Bucket capacity
2 2.5 3 3.5 4
lb/cu.yd
Material density
WA320-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and 2.7 2.3
excavating of soil, sand and variety of (3.55) (3.0)
other commonly handled materials)
II General-purpose bucket with teeth 2.5 2.2
(3.25) (2.9)
III Excavating bucket with bolt-on cutting 2.3 1.95
edges (3.0) (2.25)
IV Excavating bucket with teeth (Loading
2.1 1.8
and excavating of crushed rock and (2.75) (2.35)
blasted rock)
V Light material bucket with bolt-on
3.2 2.8
cutting edges; (A lighter-weight, large-
capacity bucket) (4.2) (3.7)
WA320-3 CUSTOM
cu.yd m3 Capacity
Heaped Struck
m3
(cu.yd)
Bucket capacity
4.2 3.2
4A-121
Bucket Selection WHEEL LOADERS
WA380-5
4.0 m3 Light Material Bucket with BOC (Scooping
Bucket fill factor (5.2 cu.yd) and loading of light material)
Bucket capacity: m3 (cu.yd)
4.0
(5.2) 3.3 m3 General Purpose Bucket with BOC
115 100 95% (4.3 cu.yd) (Loading and excavating of soil, sand and
3.3 variety of other commonly handled
(4.3) material)
2.9 2.9 m3 Excavating Bucket with BOC
(3.8) (3.8 cu.yd) Excavating Bucket with Teeth and
Segment Edge (Loading and excavating of
2.7
(3.5) crushed or blasted rock)
1000 1200 1400 1600 1800 2000 2200 kg/m3 2.7 m3 Excavating Bucket with Teeth
(3.5 cu.yd) (Loading and excavating of blasted rock)
2000 2500 3000 3500 lb/cu.yd
FVBH0185A
WA380-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and 3.2 2.7
excavating of soil, sand and variety of (4.2) (3.55)
other commonly handled materials)
II General-purpose bucket with teeth 3.0 2.6
(3.9) (3.9)
III Excavating bucket with bolt-on cutting 2.8 2.35
edges (3.65) (3.07)
IV Excavating bucket with teeth; 2.6 2.2
(Loading and excavating of crushed (3.4) (2.9)
rock and blasted rock)
V Light material bucket with bolt-on 4.0 3.4
cutting edges; (A lighter-weight, large- (5.25) (4.45)
capacity bucket)
WA420-3
cu.yd m3 Capacity
5.0 Heaped Struck
m3
4.2 4.6
(cu.yd)
I General-purpose bucket with bolt-on
Bucket capacity
4A-122
Bucket Selection WHEEL LOADERS
WA430-5
4.6 m3 Light Material Bucket with BOC
m3 yd3
Bucket fill factor
(6.0 cu.yd) (Scooping and loading of light material)
4.6 6.0
3.7 m3 General Purpose Bucket with BOC
Bucket capacity: m3 yd 3
115 100 95% (4.8 cu.yd) (Loading of crushed stone and dry sand)
3.7 4.8
3.5 m3 General Purpose Bucket with Teeth
3.5 4.6 (4.6 cu.yd) (Loading and excavating of soil, sand and
variety of other commonly handled
material)
3.3 4.3
3.3 m3 Excavating Bucket with BOC
3.1 4.1 (4.3 cu.yd) Excavating Bucket with Bolt-on Teeth and
Segments
lb/yd3 1686 2023 2360 2698 3035 3372 3709 (Loading or excavating of blasted rock)
kg/m3 1000 1200 1400 1600 1800 2000 2200
Material density: kg/m3 lb/yd 3 3.1 m3 Excavating Bucket with Teeth
(4.1 cu.yd) Rock Bucket with Teeth (Spade Nose)
(Loading or excavating of blasted rock)
WA470-5
5.2 m3 Light Material Bucket with BOC
Bucket fill factor
(6.8 cu.yd) (Scooping and loading of light material)
5.2
(6.8) 4.6 m3 Loose Material Bucket with BOC
Bucket capacity: m (cu.yd)
WA470-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and excavating of 4.2 3.6
soil, sand and variety of other commonly (5.5) (4.7)
handled materials)
3.9 3.4
II General-purpose bucket with teeth
(5.1) (4.45)
III Excavating bucket with bolt-on cutting 3.8 3.3
edges (5.0) (4.3)
IV Excavating bucket with teeth; (Loading
3.6 3.1
and excavating of crushed rock and
(4.7) (4.05)
blasted rock)
V Light material bucket with bolt-on cutting
5.2 4.5
edges; (A lighter-weight, large-capacity
(6.8) (5.9)
bucket)
VI Rock bucket with teeth; (Spade nose). 3.5 3.0
(Loading and excavating of blasted rock) (4.6) (3.9)
4A-123
Bucket Selection WHEEL LOADERS
WA480-5
6.1 m3 Light Material Bucket with BOC
Bucket fill factor
(8.0 cu.yd) Loose Material Bucket with BOC
6.1 (Loading of crushed stone and dry sand)
(8.0)
Bucket capacity: m3 (cu.yd)
WA500-3
cu.yd m3 Capacity
9
7 Heaped Struck
m3
(cu.yd)
Bucket capacity
6
I Excavating bucket (straight edge) 4.3 3.6
7 with teeth (5.6) (4.7)
6.5 5 II Excavating bucket (spade nose) with 5 4.1
4.5 teeth and segment edge (5.9) (5.4)
5.6 4.3
III General-purpose bucket with bolt on 5.0 4.6
cutting edge without teeth ; Loading (6.5) (6.0)
4 3 stockpile products
1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA600-3
cu.yd m3 Capacity
10
Heaped Struck
9 m3
(cu.yd)
Bucket capacity
10
8 I Excavating bucket (straight edge) 6.1 5.1
with tip teeth (8.0) (6.7)
II Excavating bucket (spade nose) with 6.1 5.1
8 6 tip teeth (8.0) (6.7)
11.0 9.5
4
III Coal bucket (straight edge) (14.4) (12.4)
4
1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA700-3
cu.yd m3 Capacity
10 Heaped Struck
m3
(cu.yd)
Bucket capacity
12
10 I Excavating bucket (straight edge) 8.7 7.6
without tip teeth (11.4) (9.9)
II Excavating bucket (spade nose) 8.7 7.6
10 8 without tip teeth (11.4) (9.9)
III General-purpose bucket (straight 9.4 8.2
8 edge) without tip teeth (12.3) (10.7)
6
1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.4
kg/m3 x 1000
4A-124
Bucket Selection WHEEL LOADERS
WA800-3
Capacity
Heaped Struck
m3
(cu.yd)
I Excavating bucket (spade nose) with 11.0 9.3
tip teeth (14.4) (12.2)
12.3 10.4
II Stockpile (spade nose) with teeth (16.1) (13.6)
WA900-3
Capacity
Heaped Struck
m3
(cu.yd)
I Excavating bucket (spade nose) with 13.0 11.0
tip teeth (17.0) (14.4)
WA1200-3
Capacity
115 100 95% Heaped Struck
m3
35.0
(45.5)
(cu.yd)
I Excavating bucket (spade nose) with 20.0 17.2
30.0
(39.0) tip teeth (26.2) (22.5)
Bucket capacity: m3 (cu.yd)
20.0
(26.0)
18.0
(23.4)
16.5
(21.5)
14.0
(18.2)
500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 kg/m3
1000 1500 2000 2500 3000 3500 4000 4500 5000 lb/cu.yd
FVBH0250
4A-125
Bucket Selection WHEEL LOADERS
kg/m3
1.7 m3 Loose material bucket with bolt-on cutting
1.0
1.2 1.4 1.6 1.8 2.0 2.2 2.4 x 1000 (2.25 cu.yd) edge; (A lighter-weight, large capacity
bucket)
2 2.5 3 3.5 4 lb/cu.yd
x 1000
Material density
materials)
2.9 2.2
3.5
2.7
1.9 m3 Excavating bucket with bolt-on cutting
2.75 (2.5 cu.yd) edge; (Loading or excavating of crushed or
2.1 blasted rock)
2.5
1.9 2.7 m3 Light material bucket with bolt-on cutting
(3.5 cu.yd) edge; (A lighter-weight, large-capacity
1.5 kg/m3 bucket)
1.2 1.4 1.6 1.8 2.0 2.2 2.4 x 1000
4A-126
Bucket Selection WHEEL LOADERS
2.7
(3.5)
1000 1200 1400 1600 1800 2000 2200 kg/m3
4A-127
Bucket Selection WHEEL LOADERS
6
5.5 I Excavating bucket (straight edge) with 5.5 4.5
7
6.5 5.0
teeth (7.2) (5.9)
II Excavating bucket (straight edge) with 4.5 3.9
5.9 4.5 teeth & segment edge (5.9) (5.1)
5.6
III General-purpose bucket (straight 5.0 4.6
edge) with bolt on cutting edge (6.5) (6.0)
4 3
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
1.5 2.0 2.5 3.0 3.5 4.0
lb/cu.yd x 1000
Material density
6
(cu.yd)
I Excavating bucket (straight edge) with 6.2 5.1
7 teeth (8.0) (6.6)
6.5
II Excavating bucket (spade nose) with 6.2 5.1
teeth (8.0) (6.6)
5.9
5.6
4 3
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
8
6
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
4A-128
Bucket Selection WHEEL LOADERS
Bucket
Bucket type Capacity (m3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1
Material density t/m3
Bucket
Bucket type Capacty (m3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1
Material density t/m3
4A-129
Bucket Selection WHEEL LOADERS
4A-130
Multi-Purpose Bucket WHEEL LOADERS
Specifications
Model WA180-3*3
Item
OPERATING WEIGHT kg (lb) 8910 (19620)
A. OVERALL LENGTH mm (ft.in) 6210 (20'5")
BUCKET CAPACITY m3 (cu.yd) 1.2 (1.6)
RATED LOAD kg (lb) 1920 (4230)
BUCKET EQUIPMENT**
B. Bucket width mm (ft.in) 2390 (7'10")
C. Overall height mm (ft.in)
D. Bottom dumping clearance* mm (ft.in) 3450 (11'4")
E. Dumping clearance* mm (ft.in) 2760 (9'1")
F. Dumping reach* mm (ft.in) 845 (2'9")
G. Bottom dumping reach* mm (ft.in) 765 (2'6")
H. Bucket opening mm (ft.in) 1090 (3'7")
I. Digging depth mm (ft.in) 320 (1'1")
TIRE SIZE 18.4-24-10PR
* At 45 discharge angle
** With B.O.C
*3 With ROPS canopy.
4A-131
Fork Equipment WHEEL LOADERS
Features
Log grapple
This is a special log attachment for use with logs ranging from small-diameter short
logs to large-diameter long logs. Its shape enables it to grip the log well with little
rolling shock, and it is designed so that the center of gravity of the log is close to the
machine body. This enables the machine to maintain its stability when loading and
hauling.
Log-lumber grapple
The log-lumber grapple is an all-round tool for log and lumber handling capable of
dealing with lumber, long logs of large diameter or short logs of small diameter as
well as lumber. However, forks of log-lumber grapple are fixed for strength so it is
not suitable for use in forklift operations.
Log-lumber fork
Log-lumber fork has the same features as log-lumber grapple.
This attachment has no top clamps.
Lumber grapple
The "L" type forks of the lumber fork permit handling of lumber and logs of
smaller diameter and shorter length. Clearance between left and right forks
is adjustable according to the materials being handled.
Lumber fork
Lumber fork has the same features as lumber grapple.
This attachment has no top clamps.
Dumping fork
Useful for truck-loading pulpwood from stacks, and for gathering and loading
pulpwood into stacks or onto trucks. Also usable in handling logs of smaller
diameter and shorter length. A lighter, handy version of log handling
attachments. It has no top clamp. It can load logs when tilted back to prevent
them rolling over the fork.
Pipe grapple
This is a log grapple with cushioning material to allow it to handle pipes and similar
materials.
* : Cushioning material
4A-132
Fork Equipment WHEEL LOADERS
Features
Rolling gusset
If a rolling gusset is installed to the log lumber fork or log lumber grapple, the rolling
shock can be reduced when loading logs.
Extension fork
If an extension fork is installed to the lumber fork, the efficiency of handling light
materials such as small diameter short logs can be improved.
Multi-coupler
This is an attachment replacement device that makes it possible to speed up the
replacement of attachments and reduce the burden on the operator.
It is possible to remove and install attachments to match the purpose of the work
simply when sitting in the operator's seat, thereby greatly reducing time and labor.
4A-133
Log-Loader Operations WHEEL LOADERS
A. Scooping
1. Forward the machine to insert forks under piled logs while
watching fork tips.
2. Once logs are scooped by forks and tilted back fully, then close
the arms.
3. Lift fork 30-50 cm above the ground to carry.
NOTE: Use both forks evenly to scoop and grapple the center of
logs.
B. Loading work
1. Raise booms and forward the machine gradually to the
destination while keeping the fork in a full backward tilt.
2. Open clamper arms and unload logs while slowly lowering forks.
After unloading logs, shift the fork control lever to the "tilt" position
and the fork will return automatically to its preset position.
After closing the arms and reversing the machine, lower the
booms.
NOTE: When dumping a full load of logs, lower engine revolutions
to achieve gradual dumping.
Avoid sudden braking or steering with a full load of logs.
When loading onto trucks, be careful forks and logs do not
hit the sticks mounted on the truck's body sides.
D. Other operations
Wrong Good
1. To push logs, open the clamp arms and push them with the inside
of the fork, forming right angles with the logs.
NOTE: The dumping angle should be within 20.
Avoid pushing logs with the front of the closed clamp arms.
2. To retract logs, lower fork and raise fork tips 50-100 cm above the
ground, then reverse the machine and retract the logs.
NOTE: Do not uproot tree roots with forks.
Dangerous operations, such as throwing grabbed logs for
placement in the depth of loading site, should be conducted
in open areas and only after the work site has been properly
cleared. Do not conduct these operations where damage to
the machine or other equipment is possible.
50~100cm
4A-134
Lumber Grapple WHEEL LOADERS
Specifications
Model
WA180-3** WA320-3**
Item
OPERATING WEIGHT kg (lb) 9140 (20,150) 14280 (31,490)
A. OVERALL LENGTH mm (ft.in) 6910 (22'8") 8165 (26'9")
B. OVERALL WIDTH mm (ft.in) 2210 (7'3") 2585 (8'6")
C. Max. tine height with tine level mm (ft.in) 3390 (11'1") 3745 (12'3")
D. Reach, max. tine height with tine mm (ft.in) 1980 (6'6") 2180 (7'2")
level
E. Dumping clearance* mm (ft.in) 2610 (8'7") 2840 (9'4")
F. Dumping reach* mm (ft.in) 1680 (5'6") 1865 (6'1")
G. Overall tine width mm (ft.in) 1875 (6'2") 2165 (7'1")
H. Tine length mm (ft.in) 1120 (3'7") 1320 (4'4")
I. Max. clamp opening height mm (ft.in) 2190 (7'2") 2470 (8'1")
J. Top clamp min. closure diameter mm (ft.in) 900 (2'11") 1000 (3'3")
TIRE SIZE 14.00-24-12PR 20.5-25-12PR
Add. counterweight kg (lb) 280 (620) 325 (720)
* At 30 discharge angle
** With ROPS cab
4A-135
Dumping Fork WHEEL LOADERS
Specifications
4A-136
Lumber Fork WHEEL LOADERS
Specifications
4A-137
Log Grapple WHEEL LOADERS
Specifications
Model WA320-3***
WA320-3** WA380-3** WA380-5**
Item CUSTOM
OPERATING WEIGHT kg (lb) 13980 (30,820) 13680 (30,160) 16980 (37,430) 16790 (37,020)
A. OVERALL LENGTH mm (ft.in) 7845 (25'9") 7845 (25'9") 8455 (27'9") 8627 (28'4")
B. OVERALL WIDTH mm (ft.in) 2585 (8'6") 2585 (8'6") 2695 (8'10") 2695 (8'10")
C. Max. tine height with tine mm (ft.in) 3855 (12'8") 3855 (12'8") 3985 (13'1") 3985 (13'1")
level
D. Reach, max. tine height mm (ft.in) 1880 (6'2") 1880 (6'2") 2080 (6'10") 2080 (6'10")
with tine level
E. Dumping clearance* mm (ft.in) 3075 (10'1") 3075 (10'1") 3140 (10'4") 3140 (10'4")
F. Dumping reach* mm (ft.in) 1660 (5'5") 1660 (5'5") 1835 (6') 1835 (6')
G. Overall tine width mm (ft.in) 2200 (7'3") 2200 (7'3") 2300 (7'7") 2300 (7'7")
H. Tine length mm (ft.in) 1320 (4'4") 1320 (4'4") 1420 (4'8") 1420 (4'8")
I. Max. clamp opening height mm (ft.in) 2280 ( 7'6") 2280 (7'6") 2415 (7'11") 2415 (7'11")
J. Top clamp min. closure mm (ft.in) 850 (2'9") 850 (2'9") 900 (2'11") 900 (2'11")
diameter
TIRE SIZE 20.5-25-12PR 20.5-25-12PR 20.5-25-16PR 20.5-25-20PR
Add. counterweight kg (lb) 325 (720) 750 (1,650) 750 (1,650) 705 (1,550)
* At 30 discharge angle
** With ROPS cab
*** With steel cab
4A-138
Log Grapple WHEEL LOADERS
Specifications
Model
WA500-3***
Item
OPERATING WEIGHT kg (lb) 33090 (72,950)
A. OVERALL LENGTH mm (ft.in) 10105 (33'2")
B. OVERALL WIDTH mm (ft.in) 3190 (10'6")
C. Max. tine height with tine mm (ft.in) 4375 (14'4")
level
D. Reach, max. tine height mm (ft.in) 2590 (8'6")
with tine level
E. Dumping clearance* mm (ft.in) 3300 (10'10")
F. Dumping reach* mm (ft.in) 2250 (7'5")
G. Overall tine width mm (ft.in) 2745 (9')
H. Tine length mm (ft.in) 1830 (6')
I. Max. clamp opening height mm (ft.in) 3035 (9'11")
J. Top clamp min. closure mm (ft.in) 1150 (3'9")
diameter
TIRE SIZE 29.5-25-22PR
Add. counterweight kg (lb) 2250 (4,960)
* At 30 discharge angle
** With ROPS cab
*** Rear tires are filled with calcium chloride, with steel cab & ROPS canopy
4A-139
Logger Performance WHEEL LOADERS
(Lumber Grapple)
WA180-3
Curves based on machine equipped with 14.0-24-12PR TL and counterweight for logger
mm
in
4000
150
140
STATIC TIPPING LOAD
130 [MACHINE STRAIGHT]
LIFTING CAPACITY (TINES LEVEL)
(TINES LEVEL)
120 3000
100
90
80 2000
STATIC TIPPING LOAD
70 [MACHINE FULL TURN]
(TINES LEVEL)
60
50
40 1000
30
20
10
0 1000
0 2000 4000 6000 8000 kg
0 4000 8000 10000 12000 lb
FVBH0106
WA320-3
Curves based on machine equipped with 20.5-25-12PR (L-3) TL and counterweight for logger
4A-140
Logger Performance WHEEL LOADERS
(Lumber Fork)
WA180-3 WA250-3
Curves based on machine equipped with 14.00-24- Curves based on machine equipped with 17.5-25-
12PR (L-2) TL and counterweight for logger 12PR (L-2) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
4A-141
Logger Performance WHEEL LOADERS
(Lumber Fork)
WA380-3 WA380-5
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with 20.5-25-
16PR (L-3) TL and counterweight for logger 20PR (L-3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000
150
140
130
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
4A-142
Logger Performance WHEEL LOADERS
(Dumping Fork)
WA320-3 WA320-3 CUSTOM
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with 20.5-25-
12PR (L-3) TL and counterweight for logger 12PR (L-3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
WA380-3 WA380-5
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with 20.5-25-
16PR (L-3) TL and counterweight for logger 20PR (L-3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000
150
140
LIFTING CAPACITY
130 (TINES LEVEL)
HINGE PIN HEIGHT
STATIC TIPPING
120 3000 LOAD
[MACHINE
110 FULL TURN]
(TINES LEVEL)
100
90
LIFTING CAPACITY
80 2000 (TINES ROLLED
BACK)
70
STATIC TIPPING
60 LOAD
[MACHINE
50 STRAIGHT]
40 1000 (TINES LEVEL)
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
4A-143
Logger Performance WHEEL LOADERS
(Log Grapple)
WA320-3 WA320-3 CUSTOM
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with
12PR (L-3) TL and counterweight for logger 20.5-25-12PR (L-3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
WA380-3 WA380-5
Curves based on machine equipped with Curves based on machine equipped with 20.5-25-
20.5-25-16PR (L-3) TL and counterweight for logger 20PR (L-3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000 LIFTING CAPACITY
(TINES LEVEL)
150
140
130
HINGE PIN HEIGHT
STATIC TIPPING
120 3000 LOAD
[MACHINE
110 FULL TURN]
(TINES LEVEL)
100
90 LIFTING CAPACITY
80 2000 (TINES ROLLED
BACK)
70
STATIC TIPPING
60 LOAD
[MACHINE
50 STRAIGHT]
40 1000 (TINES LEVEL)
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
4A-144
Logger Performance WHEEL LOADERS
(Log Grapple)
WA420-3 WA450-3LL
Curves based on machine equipped with 23.5-25- Curves based on machine equipped with 26.5-25-
16PR (L-3) TL and counterweight for logger 24PR (L-3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
WA470-3 WA500-3
Curves based on machine equipped with 23.5-25- Curves based on machine equipped with
20PR (L-3) TL and counterweight for logger 29.5-25-22PR (L-3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
4A-145
High Lift Boom WHEEL LOADERS
Specifications
4A-146
Tire Availability WHEEL LOADERS
: Standard tire
T/L : Tubeless tire
W/T : Tubed tire
SB : Steel breaker tire
SSB : Side steel breaker tire
4A-147
Tire Availability WHEEL LOADERS
4A-148
Tire Availability WHEEL LOADERS
: Standard tire
T/L : Tubeless tire
W/T : Tubed tire
SB : Steel breaker tire
SSB : Side steel breaker tire
*** : Germany source
4A-149
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
WA420 - WA480
ft mm
5000
15 4500
2500
2000
5 1500
1000
500
0 0
0 1000 2000 3000 4000 5000 mm
0 5 10 15 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
: Indicates dumping reach and clearance at the end of teeth or BOC.
: Indicates the top corner of body.
WA500 - WA700
ft mm
5000
WA700 HL
15 4500
WA600 HL WA700
Dumping clearance / Loading height
4000
HD605
WA500 HL
HD465
3500
WA600
HD405
10 3000 HD325
WA500 HD255
2500
2000
5 1500
1000
500
0 0
0 1000 2000 3000 4000 5000 mm
0 5 10 15 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
: Indicates dumping reach and clearance at the end of teeth or BOC.
: Indicates the top corner of body.
4A-150
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
WA800 - WA1200
ft mm
10000
30 9000
8000
Dumping clearance / Loading height
WA1200 HL 930E
7000
830E
WA1200
20 6000 630E
730E
WA800 HL
WA900 HL HD1500
5000
WA800 WA900 HD985
4000 HD785
10 3000
2000
1000
0 0
0 2000 4000 6000 8000 10000 mm
0 10 20 30 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
: Indicates dumping reach and clearance at the end of teeth or BOC.
: Indicates the top corner of body.
4A-151
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
4A-152
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
*1: Dumping clearance and loading height change depending (2) Dumping clearance (DC)
on tires. Small and medium sized loaders: DC H
Above combination is determined by following method; Large sized loaders: DCH+ (W/12)
(1) Suitable loading times (n): 3-5 times (3) Dumping reach (DR)
Max. payload of dump truck Small and medium sized loaders: DR (W/6) + 500 mm
n= Large sized loaders: DCW/3
Bucket capacity Bucket fill factor Specific weight
or (4) Body length (L)
Heaped capacity of dump truck The dump trucks body length should be 1.3 to 1.7 times longer than
n= the width of the bucket.
Bucket capacity Bucket fill factor
DR
L W
1/6W
DC
H
G.L
FVBH0298
4A-153
Production WHEEL LOADERS
Loading
Standard Production Loading (m3/h)
Cycle Cycles Bucket Size** (cu.m)
Time Per
(min) Hr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5
0.35 171 White area indicates average production
0.40 150 150 225 300 375 450
0.45 133 133 200 266 332 400 466 530 600 665
0.50 120 120 180 240 300 360 420 480 540 600 660 720 780 840 900
0.55 109 109 164 218 272 328 382 436 480 545 600 655 705 785 820
0.60 100 100 180 200 250 300 350 400 450 500 550 600 650 700 750
0.65 92 92 138 184 230 278 322 368 416 460 505 555 600 645 690
0.70 86 300 342 386 430 471 515 555 600 645
0.75 80 440 480 520 560 600
4A-154
SECTION 4B
REACH LOADERS
CONTENTS
Features .................................................................... 4B-2
Specifications ........................................................... 4B-3
Dimensions ............................................................... 4B-4
4B-1
Features REACH LOADERS
Other
The low-noise design is suitable for residential areas.
Closed wet-type brakes assure positive braking even in muddy water.
Less tire slippage due to wide tread and torque-proportioning differential gears.
Excellent travel stability due to the long wheelbase.
Stopping the engine is done with a key, the same as in an automobile.
Quick movement between job sites at max. travel speed 30 km/h (18.8MPH).
4B-2
Specifications REACH LOADERS
Model
WR8 WR11-3
Item
OPERATING WEIGHT kg (lb) 5700 (12,570) 8635 (19,040)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 55 (41.2)/2200 84 (62.5)/2400
DIN PS (kW)/rpm 55 (41.2)/2200 85 (62.5)/2400
BUCKET CAPACITY m3 (cu.yd) 0.8 (1.05) 1.3 (1.7)
PERFORMANCE:
Travel speeds: km/h(MPH)
Forward 1st 6.5 (4.0) 6.3 (3.9)
2nd 12.2 (7.6) 12.0 (7.5)
3rd 29.0 (18.0) 30.0 (18.6)
Reverse 1st 6.8 (4.2) 6.5 (4.0)
2nd 13.1 (8.1) 12.2 (7.6)
3rd 30.0 (18.6) 30.5 (19.0)
Turning radius mm(ft.in) 4705 (15'5") 5830 (19'2")
(Outside corner of bucket)
DIMENSIONS:
Overall length mm(ft.in) 5005 (16'5") 6240 (20'6")
Overall width mm(ft.in) 1910 (6'3") 2250 (7'5")
Overall height mm(ft.in) 2800 (9'2") 3035 (9'11")
Wheelbase mm(ft.in) 2450 (8') 2915 (9'7")
Treads (front and rear) mm(ft.in) 1470 (4'10") 1780 (5'10")
Articulation angle (each) degree 40 37
ENGINE:
Model KOMATSU KOMATSU
4D95L S4D102E
No. of cylinders- mm (in) 4-94 115 4-102 120
bore stroke (3.7 4.5) (4.02 4.72)
Piston displacement ltr. (cu.in) 3.26 (199) 3.92 (239)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 63 (16.6) 133 (35.1)
4B-3
WR8
WR11-3
5030(166)
4000(131")
3500(116")
3200(106")
2695(810")
210(8.3")
40 65
(1.6") (2.6")
45
58
10 2390(710")
1000(33")
2930(97")
37 37
1460
(49")
45 850(29")
2150(71")
1905(63")
16
.9
4B-4
-2 4-10
P
R
G.L
Dimensions
6485(213")
2915(97")
400
5830
(192
")
(14")
16
.9
-2 4-10
P
R
1780(510")
2945(98") 2250(75")
3080(101")
FVBH0021
REACH LOADERS
SECTION 4C
WHEEL DOZERS
CONTENTS
Features .................................................................... 4C-2
Specifications ........................................................... 4C-3
Dimensions ............................................................... 4C-4
4C-1
Features WHEEL DOZERS
Komatsu components throughout the machine assure years of reliability and high-performance service.
Adjustment-free wet disc brakes for steady braking and extended service life.
Electronic Display and Monitoring System for minimized maintenance.
A large drawbar horsepower with fuel-efficient, powerful Komatsu diesel engine for high productivity and
maneuverability.
Fingertip control with Electrically Controlled Transmission.
A tiltable steering wheel and fully adjustable suspension seat.
4C-2
Specifications WHEEL DOZERS
Model
WD420-3 WD500-3 WD600-1 WD600-3
Item
OPERATING WEIGHT kg (lb) 20000 (44,100) 26900 (59,300) 41080 (90,600) 42900 (94,577)
FLYWHEEL HORSEPOWER HP (kW)/rpm 224 (167)/2200 315 (235)/2100 454 (338)/2000 485 (362)/2000
BLADE CAPACITY m3 (cu.yd) 3.1 (4.1) 5.1 (6.7) 7.5 (9.8) 8.0 (10.5)
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 6.3 (3.9) 7.1 (4.4) 6.7 (4.2) 6.5 (4.0)
2nd 11.7 (7.3) 12.6 (7.8) 11.9 (7.4) 11.8 (7.3)
3rd 20.5 (12.7) 21.2 (13.2) 20.5 (12.7) 20.8 (12.9)
4th 32.8 (20.4) 34.8 (21.6) 35.0 (21.7) 36.2 (22.5)
Reverse 1st 6.6 (4.1) 7.9 (4.9) 7.4 (4.6) 7.2 (4.5)
2nd 12.2 (7.6) 14.1 (8.8) 13.0 (8.1) 13.0 (8.1)
3rd 21.2 (13.2) 23.5 (14.6) 22.5 (14.0) 23.0 (14.3)
4th 33.9 (21.1) 38.1 (23.7) 37.9 (23.6) 40.0 (24.9)
Turning radius mm (ft.in) 6670 (21'11") 7475 (24'7") 8240 (27')
(Outside corner of blade)
Max. rim pull kg (lb) 18100 (39,900) 26500 (58,420) 40000 (88,200) 42800 (94,360)
DIMENSIONS:
Overall length mm (ft.in) 7160 (23'6") 7930 (26") 9100 (29'10") 9285 (30'6")
Overall width mm (ft.in) 2820 (9'3") 3190 (10'6") 3570 (11'9") 3570 (11'9")
Overall height mm (ft.in) 3370 (11'1") 3860 (12'8") 4255 (14') 4245 (13'11")
Wheelbase mm (ft.in) 3300 (10'11") 3600 (11'10") 4050 (13'3") 4100 (13'5")
Treads (front and rear) mm (ft.in) 2200 (7'3") 2400 (7'10") 2650 (8'8") 2650 (8'8")
Articulation angle degree 40 40 40 40
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D108 S6D140E S6D170 SAA6D170E-3
No. of cylinders- mm (in) 6-108 130 6-140 165 6-170 170 6-170 x 170
bore stroke (4.3 5.1) (5.5 6.5) (6.7 6.7) (6.69 x 6.69)
Piston displacement ltr. (cu.in) 7.15 (436) 15.24 (930) 23.15 (1412) 23.15 (1413)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 340 (90) 465 (123) 610 (161) 670 (177)
TIRE:
(front) 23.5-25-12PR 29.5-25-22PR 35/65-33-24PR 35/65-33-24PR
(rear) 23.5-25-12PR 29.5-25-22PR 35/65-33-24PR 35/65-33-25PR
Model
WD900-3
Item
OPERATING WEIGHT kg (lb) 100000 (220,460)
FLYWHEEL HORSEPOWER HP (kW)/rpm 853 (637)/2000
BLADE CAPACITY m3 (cu.yd) 26.0 (34.0)
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 7.0 (4.3)
2nd 12.3 (7.6)
3rd 28.0 (17.4)
4th
Reverse 1st 7.1 (4.4)
2nd 12.4 (7.7)
3rd 28.3 (17.6)
4th
Turning radius mm (ft.in) 9200 (30'2")
(Outside corner of blade)
Max. rim pull kg (lb) 100000 (220,460)
DIMENSIONS:
Overall length mm (ft.in) 12035 (39'6")
Overall width mm (ft.in) 6470 (21'3")
Overall height mm (ft.in) 5215 (17'1")
Wheelbase mm (ft.in) 5450 (31')
Treads (front and rear) mm (ft.in) 3350 (11')
Articulation angle degree 40
ENGINE:
Model KOMATSU
SA12V140
No. of cylinders- mm (in) 12-140 165
bore stroke (5.5 6.5)
Piston displacement ltr. (cu.in) 30.5 (1861)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 1430 (378)
TIRE:
(front) 45/65-R45XLDD (L4)
(rear) 45/65-R45XLDD (L4)
4C-3
Dimensions WHEEL DOZERS
WD420-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 3.1 (4.1)
A Blade width mm (ft.in) 3745 (12'3")
B Max. lift above ground mm (ft.in) 1190 (3'11")
C Max. drop below ground mm (ft.in) 510 (1'8")
D Max. tilt adjustment mm (ft.in) 950 (3'1")
Max. pitch angle adjustment degree 21
E Overall length mm (ft.in) 7160 (23'6")
F Front overhang mm (ft.in) 1760 (5'9")
Turning radius mm (ft.in) 6670 (21'11")
Operating weight (include ROPS) kg (lb) 20000 (44100)
WD500-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 5.1 (6.7)
A Blade width mm (ft.in) 4550 (14'11")
B Max. lift above ground mm (ft.in) 1255 (4'1")
C Max. drop below ground mm (ft.in) 440 (1'5")
D Max. tilt adjustment mm (ft.in) 1260 (4'2")
Max. pitch angle adjustment degree 9
E Overall length mm (ft.in) 7930 (26)
F Front overhang mm (ft.in) 1860 (6'1")
Turning radius mm (ft.in) 7485 (24'7")
Operating weight (include ROPS) kg (lb) 26900 (59300)
4C-4
Dimensions WHEEL DOZERS
WD600-1
Blade type Straight Blade U Blade Coal Blade
Blade capacity (SAE Rated) m3 (cu.yd) 7.5 (9.8) 10.6 (13.9) 21.5 (28.1)
A Blade width mm (ft.in) 4750 (15'7") 4870 (16') 5800 (19')
B Max. lift above ground mm (ft.in) 1500 (4'11") 1510 (4'11") 1575 (5'2")
C Max. drop below ground mm (ft.in) 450 (17.7") 455 (17.9") 475 (18.7")
D Max. tilt adjustment mm (ft.in) 1300 (4'3") 1335 (4'4") 1590 (5'2")
Max. pitch angle adjustment degree 23 23 23
E Overall length mm (ft.in) 9100 (27'10") 9780 (32') 9885 (32'5")
F Front overhang mm (ft.in) 2195 (7'2") 2875 (9'5") 2980 (9'9")
Turning radius mm (ft.in) 8240 (27') 8500 (27'10") 8980 (29'5")
Operating weight (include ROPS) kg (lb) 41000 (90405) 41750 (92060) 42550 (93820)
WD600-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 8.0 (10.5)
A Blade width mm (ft.in) 5100 (16'9")
B Max. lift above ground mm (ft.in) 1500 (4'11")
C Max. drop below ground mm (ft.in) 450 (17.7")
D Max. tilt adjustment mm (ft.in) 1430 (4'8")
Max. pitch angle adjustment degree 23
E Overall length mm (ft.in) 9285 (30'6")
F Front overhang mm (ft.in) 2205 (7'3")
Turning radius mm (ft.in)
Operating weight (include ROPS) kg (lb) 42900 (94,360)
WD900-3
Blade type Semi-U blade Coal blade
Blade capacity (SAE Rated) m3 (cu.yd) 26.0 (34.0) 45.0 (58.9)
A Blade width mm (ft.in) 6470 (21'3") 7400 (24'3")
B Max. lift above ground mm (ft.in) 1580 (5'2") 1560 (5'1")
C Max. drop below ground mm (ft.in) 680 (2'3") 680 (3'3")
D Max. tilt adjustment mm (ft.in) 1330 (4'4") 1710 (5'7")
Max. pitch angle adjustment degree 8 8
E Overall length mm (ft.in) 12035 (396")
F Front overhang mm (ft.in) 3385 (11'1")
Turning radius mm (ft.in) 11285 (37')
Operating weight (include ROPS) kg (lb) 100000 (220460)
4C-5
MEMO
SECTION 4D
TRASH COMPACTORS
& TRASH LOADERS
CONTENTS
Features .................................................................... 4D-2
Specifications ........................................................... 4D-3
Dimensions ............................................................... 4D-4
4D-1
Features TRASH COMPACTORS
& TRASH LOADERS
Trash compactors
Komatsu's exclusive triangular foot design and patterning assure better compaction.
Straight dozer blade mechanism similar to that of job-proven bulldozer makes leveling operation smooth
and quick.
Extension plate increases blade size, thus handling a larger quantity of material.
Powerful Komatsu engine provides fuel-efficient operation.
Heavy operating weight, which can be further increased by water ballast of 3000 liters (793 U.S. gal),
develops powerful breaking and compaction force. (WF450T-3 only)
Single-lever smooth direction and speed changes.
The blade controls using PPC control reduce operating effort and improve response.
Light-touch power steering and completely enclosed operator cab make compacting operation more
comfortable.
Trash loaders
Komatsu's exclusive triangular foot design and patterning assure better compaction.
Highly versatile bucket for waste is installed to haul and spread wastes and soil efficiently. Trash guard
and bucket teeth are equipped as standard.
Powerful Komatsu engine provides fuel-efficient operation.
The bucket and boom controls using PPC control reduce operating effort and improve response.
Light-touch power steering and completely enclosed operator cab make compacting operation more
comfortable.
4D-2
Specifications TRASH COMPACTORS
& TRASH LOADERS
Model
WF450T-3 WF550T-3 WF650T-3
Item
OPERATING WEIGHT kg (lb) 24600 (54,230) 34500 (76,060) 45500 (100,310)
FLYWHEEL HORSEPOWER HP (kW)/rpm 259 (194)/2200 316 (235)/2100 439 (327)/2000
PERFORMANCE
Travel speeds: km/h (MPH)
Forward 1st 6.2 (3.9) 5.0 (3.1) 5.0 (3.1)
2nd 11.0 (6.8) 8.6 (5.3) 8.6 (5.3)
Reverse 1st 6.5 (4.0) 5.5 (3.4) 5.5 (3.4)
2nd 11.5 (7.1) 9.6 (6.0) 9.5 (5.9)
Turning radius mm (ft.in) 7000 (23') 7504 (24'7'') 8590 (28'2'')
(Outside corner of blade)
Max. rim pull kg (lb) 21500 (474,00) 38000 (83,780) 57000 (125,660)
DIMENSIONS:
Overall length mm (ft.in) 7520 (24'8'') 8145 (26'9'') 8925 (29'3'')
Overall width mm (ft.in) 3400 (11'2") 3800 (12'6'') 4300 (14'1'')
Overall height mm (ft.in) 3615 (11'10'') 4050 (13'3'') 4430 (14'6'')
Wheelbase mm (ft.in) 3400 (11'2'') 3600 (11'10'') 4100 (13'5'')
Treads (front and rear) mm (ft.in) 2350 (7'9'') 2600 (8'6'') 2900 (9'6'')
Articulation angle degree 40 40 40
ENGINE:
Model KOMATSU KOMATSU KOMATSU
S6D125E S6D140E SA6D170E
No. of cylinders- mm (in) 6-125 150 6-140 165 6-170 170
bore stroke (4.92 5.91) (5.51 6.50) (6.69 6.69)
Piston displacement ltr. (cu.in) 11.04 (674) 15.24 (928) 23.15 (1,413)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 390 (103) 630 (166) 890 (235)
Model
WF350-3 WF450-3 WF550-3
Item
OPERATING WEIGHT kg (lb) 19510 (42,220) 24950 (55,010) 35000 (77,160)
FLYWHEEL HORSEPOWER HP (kW)/rpm 187 (138)/3200 259 (194)/2200 316 (235)/2100
BUCKET CAPACITY m3 (cu.yd) 3.0 (3.9) 3.7 (4.8) 4.7 (6.1)
PERFORMANCE
Travel speeds: km/h (MPH)
Forward 1st 7.1 (4.4) 6.2 (3.9) 5.1 (3.2)
2nd 11.4 (7.1) 11.2 (7.0) 9.2 (5.7)
Reverse 1st 7.4 (4.6) 6.4 (4.0) 7.9 (4.9)
2nd 11.8 (7.3) 11.7 (7.3) 14.1 (8.8)
Turning radius mm (ft/in) 6730 (22'1'') 6955 (22'10'') 7595 (24'11'')
(Outside corner of bucket)
Max. rim pull kg (lb) 16300 (35,940) 20800 (45,860) 38000 (83,780)
DIMENSIONS:
Overall length mm (ft.in) 8020 (26'4'') 8825 (28'11'') 9580 (31'5'')
Overall width mm (ft.in) 2845 (9'4'') 3290 (10'10'') 3900 (12'10'')
Overall height mm (ft.in) 3375 (11'1") 3455 (11'4'') 3905 (12'10'')
Wheelbase mm (ft.in) 3200 (10'6'') 3400 (11'2'') 3600 (11'10'')
Treads (front and rear) mm (ft.in) 2145 (7'') 2400 (7'10'') 2800 (9'2'')
Articulation angle degree 38 40 40
ENGINE:
Model KOMATSU KOMATSU KOMATSU
SA6D108E SA6D125E SA6D140E
No. of cylinders- mm (in) 6-108 130 6-125 150 6-140 165
bore stroke (4.25 5.12) (4.92 5.91) (5.51 6.50)
Piston displacement ltr. (cu.in) 7.15 (436) 11.04 (674) 15.24 (928)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 287 (76) 390 (103) 465 (123)
4D-3
Dimensions TRASH COMPACTORS
& TRASH LOADERS
Trash compactor
E F
JK
H
C I D
A
A B C D E F G H I J K L
mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
7520 3615 4100 3400 2350 3400 1050 475 1760 1900 1250 450
WF450T-3
(24'8") (11'10") (13'5") (11'2") (7'9") (11'2") (3'5") (1'7") (5'9") (6'3") (4'1") (1'6")
8145 4050 4550 3600 2600 3800 1200 500 1960 2005 1500 480
WF550T-3
(26'9") (13'3") (14'11) (11'10") (8'6") (12'6") (3'11") (1'8") (6'5") (6'7") (4'11") (1'7")
8925 4430 5200 4100 2900 4300 1400 525 2400 2250 1560 580
WF650T-3
(29'3") (14'6") (17'1") (13'5") (9'6") (14'1") (4'7") (1'9") (7'10") (7'5") (5'1") (1'11")
Trash loader
G
E F
45o
L
J
K B
G.L. H
I D
C
A
A B C D E F G H I J K L M
mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
8020 3375 2915 3200 2145 2845 700 450 2835 4090 3070 1120 6730
WF350-3
(26'4") (11'1") (9'7") (10'6") (7') (9'4") (2'4") (1'6") (9'4") (13'5") (10'1") (3'8") (22'1")
8825 3455 3405 3400 2400 3290 850 475 3065 4340 3250 1210 6955
WF450-3
(28'11") (11'4") (11'2") (11'2") (7'10) (10'10") (2'9") (1'7") (10'1") (14'3") (10'8") (4'0") (22'10")
9580 3905 4145 3600 2800 3900 1100 500 3190 4545 3380 1275 7595
WF550-3
(31'5") (12'10") (13'7") (11'10") (9'2") (12'10") (3'7") (1'8") (10'6") (14'11") (11'1") (4'2") (24'11")
4D-4
SECTION 4E
TOWING TRACTORS
(FOR AIRPLANE)
CONTENTS
Features .................................................................... 4E-2
Specifications ........................................................... 4E-3
Dimensions ............................................................... 4E-4
4E-1
Features TOWING TRACTORS
4E-2
Specifications TOWING TRACTORS
Model
WT250E-1 WT500E-1
Item
WEIGHT: kg (lb)
Operating weight 25000 (55,130) 50000 (110,250)
Distribution (front) 12500 (27,560) 25000 (55,130)
(rear) 12500 (27,560) 25000 (55,130)
FLYWHEEL HORSEPOWER HP (kW)/rpm 217 (162)/2400 304 (227)/2200
PERFORMANCE:
Maximum drawbar pull kg (lb) 20000 (44,100) 38000 (83,770)
Travel speeds: km/h (MPH)
Forward 1st 7.0 (4.3) 3.6 (2.2)
2nd 12.5 (7.8) 9.0 (5.6)
3rd 22.3 (13.9) 20.0 (12.4)
4th 33.8 (21.0) 30.0 (18.6)
Reverse 1st 7.4 (4.6) 3.6 (2.2)
2nd 13.2 (8.2) 9.0 (5.6)
3rd 23.5 (14.6) 20.0 (18.6)
4th 35.3 (21.9)
Turning radius (4ws) mm (ft.in) 6600 (21'8") 6500 (21'4")
(2ws) 10000 (32'10") 10000 (32'10")
DIMENSIONS:
Overall length mm (ft.in) 7670 (25'2") 8345 (27'5")
Overall width mm (ft.in) 2900 ( 9'6") 2930 ( 9'7")
Overall height* mm (ft.in) 2945 ( 9'8") 2950 ( 9'8")
Wheelbase mm (ft.in) 3300 (10'10") 3500 (11'6")
Treads (front and rear) mm (ft.in) 2250 ( 7'5") 2440 (8')
Minimum ground clearance mm (in) 250 ( 9.8") 210 ( 8.3")
ENGINE: KOMATSU KOMATSU
Model SA6D108 S6D125
No. of cylinders- mm (in) 6-108 130 6-125 150
bore stroke (4.25 5.12) (4.92 5.90)
Piston displacement ltr. (cu.in) 7.15 (436) 11.04 (673)
TIRES:
Front tire 14.00-25-20PR 16.00-25-32PR
Rear tire 14.00-25-20PR 16.00-25-32PR
CAPACITY:Fuel tank ltr. (U.S. Gal) 300 (79.3) 300 (79.3)
* To top of yellow warning lamp
4E-3
Dimensions TOWING TRACTORS
WT250E-1
Unit: mm (ft.in)
WT500E-1
Unit: mm (ft.in)
4E-4
CONTENTS
INDEX
SECTION 5
BACKHOE LOADERS
CONTENTS
Features .......................................................................5-2
Specifications ..............................................................5-3
Dimensions ..................................................................5-4
5-1
Features BACKHOE LOADERS
! Superior lift capacities and breakout ! A high steering angle combined with
forces excellent maneuverability result in
Komatsu's superior lift capacities and breakout fast cycle times for the operator.
forces are achieved exclusively through the
HydrauMind hydraulic system.
The front loader has superb breakout forces and ! Komatsu's backhoe loaders are
lift capacity due in part to the unique design of the equipped with Power Shuttle
loader.
transmissions and "Power shift"
inverters.
! Komatsu's ergonomic innovations
create the perfect operating
environment. ! Komatsu's Electronic Gear
Management (EGM) system allows
We ergonomically designed the controls
offering ease of operation, using a hydraulic the operator to utilize the Powershift
system that responds smoothly and precisely. transmission in either manual or
The cab allows for all-around visibility and is automatic mode.
extremely quiet.
The Komatsu Powershift transmission has been
The ergonomically designed suspension seat designed to safely allow the operator to perform
is very comfortable and fully adjustable. all functions efficiently. In addition to offering two
modes of operation, the Powershift comes
standard with:
! Multi-function loader control lever's
Self diagnostics system
cutting edge design allows for
Anti-theft system
fingertip operation of all key loader Engagement and automatic disengagement of
functions. four wheel drive
Transmission disconnect Kick down switch
Auxiliary hydraulic control
Rear differential lock
Hydraulic speed up function
Kick down (PS version only)
5-2
Specifications BACKHOE LOADERS
Model
WB70A-1 WB91R-2 WB93R-2 WB97R-2
Item
OPERATING WEIGHT* kg (lb) 5650 (12,460) 7500 (16,530) 7500 (16,530) 7500 (16,530)
FLYWHEEL HORSEPOWER
SAE HP (kW)/rpm 69.7 (52)/2500 82.5 (61.5)/2200 97.8 (73)/2200 97.8 (73)/2200
DIN PS (kW) /rpm 70.7 (52)/2500 83.6 (61.5)/2200 99.3 (73)/2200 99.3 (73)/2200
BUCKET CAPACITY* m3 (cu.yd) 0.7 (0.92) 1.03 (1.35) 1.03 (1.35) 1.03 (1.35)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 4.7 (2.9) 6.5 (4.0) 6.5 (4.0) 6.5 (4.0)
2nd 10.5 (6.5) 12 (7.5) 12 (7.5) 12 (7.5)
3rd 18 (11) 23 (14) 23 (14) 23 (14)
4th 39 (24) 40 (25) 40 (25) 40 (25)
Reverse 1st 4.5 (2.8) 6.5 (4.0) 6.5 (4.0) 6.5 (4.0)
2nd 10.5 (6.5) 12 (7.5) 12 (7.5) 12 (7.5)
3rd 18 (11) 23 (14) 23 (14) 23 (14)
4th 39 (24) 40 (25) 40 (25) -
Turning radius* mm (ft.in) 4380 (14'4") 5450 (17'11") 5450 (17'11") 5450 (17'11")
(Outside corner of bucket)
DIMENSIONS*:
Overall length*** mm (ft.in) 5270 (17'3") 5895 (19'4") 5895 (19'4") 5895 (19'4")
Overall width mm (ft.in) 1850 (6'1") 2320 (7'7") 2320 (7'7") 2320 (7'7")
Overall height** mm (ft.in) 2660 (8'9") 2750 (9') 2750 (9') 2750 (9')
Wheelbase mm (ft.in) 2150 (7'1") 2175 (7'2") 2175 (7'2") 2175 (7'2")
Treads (front) mm (ft.in) 1490 (4'10") 1920 (6'4") 1920 (6'4") 1920 (6'4")
Treads (rear) mm (ft.in) 1490 (4'10") 1800 (5'11") 1800 (5'11") 1800 (5'11")
Articulation angle (each) degree 40
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
No. of cylinders- 4D98E-FA 4D106-FA S4D106-FA S4D106-1FA
bore stroke mm (in) 4-98 110 4-106 125 4-106 125 4-106 125
(3.9 4.3) (4.2 4.9) (4.2 4.9) (4.2 4.9)
Piston displacement ltr. (cu.in) 3.32 (203) 4.41 (269) 4.41 (269) 4.41 (269)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 70 (18.5) 130 (34.3) 130 (34.3) 130 (34.3)
Model
WB97S-2 WB98A-2 WB140-2 WB150-2
Item
OPERATING WEIGHT* kg (lb) 8000 (17,640) 8100 (17,860) 7525 (16,600) 7890 (17,400)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 97.8 (73)/2200 96.5 (72)/2200 86 (64.1)/2200 98 (73)/2200
DIN PS (kW) /rpm 99.3 (73)/2200 97.9 (72)/2200 87.2 (64.1)/2200 99.4 (73)/2200
BUCKET CAPACITY* m3 (cu.yd) 1.10 (1.43) 1.10 (1.43) 0.95 (1.25) 0.95 (1.25)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 5.0 (3.1) 6.5 (4.0) 6.3 (3.9) 6.3 (3.9)
2nd 12 (7.5) 12 (7.5) 11.4 (7.1) 11.4 (7.1)
3rd 23 (14.3) 20 (12) 21.3 (13.2) 21.3 (13.2)
4th 40 (25) 36 (22) 37.8 (23.5) 37.8 (23.5)
Reverse 1st 6.5 (4.0) 6.5 (4.0) 6.3 (3.9) 6.3 (3.9)
2nd 12 (7.5) 12 (7.5) 11.4 (7.1) 11.4 (7.1)
3rd 23 (14.3) 20 (12) 21.3 (13.2) 21.3 (13.2)
4th - 36 (22) 37.8 (23.5) 37.8 (23.5)
Turning radius* mm (ft.in) 4700 (15'5") 4680 (15'4") 5500 (18'1") 5500 (18'1")
(Outside corner of bucket)
DIMENSIONS*:
Overall length*** mm (ft.in) 5895 (19'4") 5575 (18'3") 6125 (20'1") 6125 (20'1")
Overall width mm (ft.in) 2420 (7'11") 2250 (7'5") 2355 (7'9") 2355 (7'9")
Overall height** mm (ft.in) 2750 (9'0") 2920 (9'7") 2750 (9'0") 2750 (9'0")
Wheelbase mm (ft.in) 2175 (7'2") 2355 (7'9") 2170 (7'1") 2170 (7'1")
Treads (front) mm (ft.in) 1950 (6'5") 1650 (5'5") 1890 (6'2") 1890 (6'2")
Treads (rear) mm (ft.in) 1950 (6'5") 1650 (5'5") 1800 (5'11") 1800 (5'11")
Articulation angle (each) degree 40
ENGINE:
KOMATSU KOMATSU KOMATSU KOMATSU
No. of cylinders- S4D106-1FA S4D106E-1FC S4D106-1FH S4D106-1FA
bore stroke mm (in) 4-106 125 4-106 125 4-106 125 4-106 125
(4.2 4.9) (4.2 4.9) (4.2 4.9) (4.2 4.9)
Piston displacement ltr. (cu.in) 4.41 (269) 4.41 (269) 4.41 (269) 4.41 (269)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 130 (34.3) 110 (29.1) 130 (34.3) 130 (34.3)
* With standard tires and bucket
** Height to top of the cab
*** Transport length
5-3
Dimensions BACKHOE LOADERS
A B C D E F G H I L M N
mm mm mm mm deg. deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
3885 110 3125 2480 46 40 44 870 440 1650 2150 1470
WB70A-1
(12'9") (4.3") (10'3") (8'2") (2'10") (1'5") (5'5") (7'1") (4'10")
4340 75 3470 2790 43 42 54 895 440 1770 2355 1450
WB98A-2
(14'3") (3.0") (11'5") (9'2") (2'11") (1'5") (5'10") (7'9") (4'9")
5-4
Dimensions BACKHOE LOADERS
A B BB C D E F G H I J K L
mm mm mm mm mm mm deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
4220 3400 3200 2750 2750 750 45 45 110 1930 430 2175 1320
WB91R-2
(13'1") (11'2") (10'6") (9') (9') (2'6") (4.3") (6'4") (1'5") (7'2") (4'4")
4220 3400 3200 2750 2750 750 45 45 110 1930 430 2175 1320
WB93R-2
(13'1") (11'2") (10'6") (9') (9') (2'6") (4.3") (6'4") (1'5") (7'2") (4'4")
4220 3400 3200 2750 2750 750 45 45 110 1930 430 2175 1320
WB97R-2
(13'1") (11'2") (10'6") (9') (9') (2'6") (4.3") (6'4") (1'5") (7'2") (4'4")
M N O P Q R S T U V W X Y Z
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
5895 3700 5510 4500 2500 5550 4950 2750 1800 1920 2320 3660 1080 1150
WB91R-2
(19'4") (12'2") (18'1") (14'9") (8'2") (18'3") (16'3") (9') (5'11") (6'4") (7'7") (12') (3'7") (3'9")
5895 3700 5510 4500 2500 5550 4950 2750 1800 1920 2320 3660 1080 1150
WB93R-2
(19'4") (12'2") (18'1") (14'9") (8'2") (18'3") (16'3") (9') (5'11") (6'4") (7'7") (12') (3'7") (3'9")
5895 3700 5510 4500 2500 5550 4950 2750 1800 1920 2320 3660 1080 1150
WB97R-2
(19'4") (12'2") (18'1") (14'9") (8'2") (18'3") (16'3") (9') (5'11") (6'4") (7'7") (12') (3'7") (3'9")
5-5
Dimensions BACKHOE LOADERS
A B C D E F G H I J K L
mm mm mm mm mm deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
4185 3365 2750 2750 670 45 45 90 2080 320 2170 1175
WB140-2
(13'9") (11'0") (9') (9') (2'2") (4.0") (6'10") (1'1") (7'1") (3'10)
4185 3365 2750 2750 670 45 45 90 2080 320 2170 1175
WB150-2
(13'9") (11'0") (9') (9') (2'2") (4.0") (6'10") (1'1") (7'1") (3'10)
M N O P Q R S T U V W X
mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
6125 3490 4930 4420 2860 5520 5590 2750 1800 1890 2355 3550
WB140-2
(20'1") (11'5") (16'2") (14'6") (9'5") (18'1") (18'4") (9') (5'11") (6'2") (7'9") (11'8")
6125 3710 5155 4725 3100 5715 5590 2750 1800 1890 2355 3550
WB150-2
(20'1") (12'2") (16'11") (15'5") (10'2") (18'9") (18'4") (9') (5'11") (6'2") (7'9") (11'8")
5-6
CONTENTS
INDEX
SECTION 6
SKID STEER LOADERS
CONTENTS
Features .......................................................................6-2
Specifications ..............................................................6-3
Dimensions ..................................................................6-4
6-1
Features SKID STEER LOADERS
Versatility
The foot accelerator ensures greater control over
power during operation.
Ready for use with any equipment, the base
version features an auxiliary hydraulic circuit with
proportional control.
6-2
Specifications SKID STEER LOADERS
Model
SK04J-2 SK05J-2 SK714-5 SK815-5
Item
OPERATING WEIGHT* kg (lb) 1550 (3,420) 1760 (3,880) 2530 (5,580) 2630 (5,800)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 20.8 (15.5)/2800 30.8 (23)/2800 47.2 (34.7)/2800 47.2 (34.7)/2800
DIN PS (kW) /rpm 21.1 (15.5)/2800 31.3 (23)/2800 47.9 (34.7)/2800 47.9 (34.7)/2800
BUCKET CAPACITY* m3 (cu.yd) 0.16 (0.21) 0.22 (0.29) 0.35 (0.46) 0.4 (0.52)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 9 (5.6) 9.2 (5.7) 10.5 (6.5) 10.5 (6.5)
2nd 16 (9.9) 16 (9.9)
3rd
4th
Reverse 1st 9 (5.6) 9.2 (5.7) 10.5 (6.5) 10.5 (6.5)
2nd 16 (9.9) 16 (9.9)
3rd
4th
Turning radius* mm (ft.in) 1465 (4'10'') 1617 (5'4") 2100 (6'11") 2150 (7'11")
(Outside corner of bucket)
DIMENSIONS*:
Overall length mm (ft.in) 2570 (8'5") 2760 (9'1") 3200 (10'6") 3350 (11'0")
Overall width mm (ft.in) 1080 (3'7") 1260 (4'2") 1550 (5'1") 1730 (5'8")
Overall height** mm (ft.in) 1860 (5'6") 1870 (6'2") 1960 (6'5") 1960 (6'5")
Wheelbase mm (ft.in) 740 (2'5") 800 (2'7") 950 (3'1") 1050 (3'5")
Treads (front and rear) mm (ft.in) 820 (2'8") 1125 (3'8") 1250 (4'11") 1380 (4'6")
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
3D74E 3D84E 4D88E 4D88E
No. of cylinders- mm (in) 3-74 78 3-84 86 3-88 90 3-88 90
bore stroke (2.9 3.1) (3.3 3.4) (3.5 3.5) (3.5 3.5)
Piston displacement ltr. (cu.in) 1.01 (62) 1.43 (87) 2.19 (134) 2.19 (134)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 27 (7.1) 48 (12.7) 53 (14.0) 53 (14.0)
Model
SK818-5 SK1020-5
Item
OPERATING WEIGHT* kg (lb) 2910 (6,415) 3420 (7,540)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 47.2 (34.7)/2800 69.5 (51.1)/2500
DIN PS (kW) /rpm
BUCKET CAPACITY* m3 (cu.yd) 0.4 (0.52) 0.45 (0.59)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 10 (6.2) 10 (6.2)
2nd
3rd
4th
Reverse 1st 16 (10) 16 (10)
2nd
3rd
4th
Turning radius* mm (ft.in) 2150 (7') 2155 (7')
(Outside corner of bucket)
DIMENSIONS*:
Overall length mm (ft.in) 3350 (11') 3550 (11'7")
Overall width mm (ft.in) 1730 (5'7") 1880 (6'2")
Overall height** mm (ft.in) 2000 (6'6") 2080 (6'10")
Wheelbase mm (ft.in) 1050 (3'5") 1160 (3'9")
Treads (front and rear) mm (ft.in) 1385 (4'5") 1500 (4'9")
ENGINE:
Model KOMATSU KOMATSU
4D88E 4D98E
No. of cylinders- mm (in) 4-88 90 4-98 110
bore stroke (3.46 3.54) (3.85 4.33)
Piston displacement ltr. (cu.in) 2.19 (133.6) 3.32 (203)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 47 (12.41) 73 (19.28)
6-3
Dimensions SKID STEER LOADERS
Q M
N
K
J
L
G F E
H C
P D
A
B FVBH0216
Model
SK818-5 SK1020-5
Item
A: Wheel base mm (ft.in) 1050 (3'5") 1160 (3'9")
B: Overall length mm (ft.in) 3350 (11') 3550 (11'7")
C: Overall height mm (ft.in) 2000 (6'6") 2080 (6'10")
D: Ground clearance mm (in) 210 (8.26") 240 (9.44")
E: Width over tires mm (ft.in) 1660 (5'5") 1840 (6')
F : Tread mm (ft.in) 1385 (4'5") 1500 (4'9")
G: Bucket width mm (ft.in) 1730 (5'7") 1880 (6'2")
H: Dumping clearance, max. height mm (ft.in) 2280 (7'5") 2390 (7'10")
J : Reach at max. height mm (ft.in) 775 (2'6") 590 (2')
K: Operating height (fully raised) mm (ft.in) 3820 (12'6") 3965 (13')
L : Hinge pin height, max. height mm (ft.in) 3000 (9'10") 3100 (10'1")
M: Turning radius at bucket corner mm (ft.in) 2015 (6'7") 2150 (7')
N: Turning radius at rear tail corner mm (ft.in) 1665 (5'5") 1650 (5'5")
P: Tilt back angle, carry position degree 30 33
Q: Dump angle, max. height degree 45 41
*: Narrow version
6-4
CONTENTS
INDEX
SECTION 7
OFF-HIGHWAY DUMP TRUCKS Sec 7A
ARTICULATED DUMP TRUCKS Sec 7B
SLAG DUMP TRUCKS Sec 7C
SECTION 7A
OFF-HIGHWAY
DUMP TRUCKS
CONTENTS
Features .................................................................... 7A-2
Specifications ........................................................... 7A-5
Dimensions ............................................................... 7A-8
Use of performance curve ..................................... 7A-10
Performance curve
HD255-5 .............................................................. 7A-11
HD325-6 .............................................................. 7A-13
HD325-6 4WD ..................................................... 7A-15
HD405-6 .............................................................. 7A-17
HD465-7 .............................................................. 7A-19
HD605-7 .............................................................. 7A-21
HD785-5 .............................................................. 7A-23
HD985-5 .............................................................. 7A-27
HD1200-1 ............................................................ 7A-29
HD1500-5 ............................................................ 7A-30
630E .................................................................... 7A-31
730E .................................................................... 7A-32
830E .................................................................... 7A-33
930E-3 ................................................................. 7A-34
Attachments and options ...................................... 7A-35
Tire selection ......................................................... 7A-39
Body selection ...................................................... 7A-42
Production ............................................................. 7A-53
7A-1
Features OFF-HIGHWAY
DUMP TRUCKS
! High productivity
The result of total performance: High performance,
minimum downtime, and easy operation
! Dependable and high-performance
components
Komatsu diesel engine delivers high-output and
direct injection system provides high fuel
efficiency
Full-automatic TORQFLOW transmission:
A microcomputer built into the shift controller
automatically selects the optimum gear position
according to travel speed, load and road
conditions assuring effort-free operation.
High-performance, durable brakes: Sealed, oil-
cooled, multiple-disc brakes on rear wheels are
designed for extended operation. The large-
capacity rear wheel brakes also act as retarders
as a precaution against engine overrunning when
descending steep inclines.
High maneuverability: The MacPherson strut type
front suspension system has a special A-frame
between each wheel and the main frame. The
wider space created between the front wheels
and the main frame increases the turning angle of
the wheels. The larger this turning angle, the
smaller the turning radius of the truck.
Extra sturdiness: Box-section, ladder type frame
construction of high-tensile-strength steel plate
and cast steel offer unfaltering durability for long
service.
7A-2
Features OFF-HIGHWAY
DUMP TRUCKS
! Easy operation/operator comfort
K-ATOMICS for extra-smooth ride
K-ATOMICS stands for "Komatsu - Advanced
Transmission with Optimum Modulation Control
System" that consists of the computer, sensors
and electronically controlled modulation valve
(ECMV) fitted to each clutch. The computer
sophisticatedly controls hydraulic pressure of
clutches in the planetary gear transmission
through ECMV, making clutch engagement /
disengagement smooth and shock-free. Results
are smooth, continuous acceleration and
deceleration without the shocks and interruption
of continuous torque rise/drop.
High traveling stability:
Nitrogen gas
Hydro-pneumatic suspension, low center of
gravity, long wheelbase and wide treads all
ensure excellent stability and greater operator
comfort.
Comfortable hydro-pneumatic
suspension:
Employed on four wheels. As the load from the
body and the ground increases the displacement
difference becomes greater. When heavy loads
are added, the hydro-pneumatic system oscillates
with longer strokes to absorb the extra shock.
This efficient cushioning function contributes to
greater comfort, higher stability and extended
durability.
Low loading height and large target area:
The newly designed body has large target area
and a low loading height, for easier loading and
shortened loading cycles.
Ideal driving position settings:
The 5-way adjustable operator seat and the tilt-
telescopic steering column create an optimum
driving posture, for increased driving comfort and
more control over the machine's operations.
job sites
In comparison with 2WD models, the superior 4WD
mobility of the 4WD truck on soft-terrain dumping
sites means reduced dozing work.
50 60 70 80 90 100%
7A-3
HD325-6 4WD OFF-HIGHWAY
Features DUMP TRUCKS
! Electronically controlled 4WD system
In response to ground conditions, the electronic control system constantly and effectively controls driving
force and revolution of the hydraulic pumps installed in the front wheels, respectively, thus ensuring superb
travel.
Part-time 4WD
Driving force control realizes excellent maneuverability.
The 4WD/2WD auto-change system provides substantial fuel savings.
Smooth straight travel and cornering
The front wheel brake realizes stable downhill travel
! Radial tires are installed as standard
These provide excellent gripping force and contribute to stable travel.
! Front brake is also maintenance-free
As well as the rear brake, the front brake employs a maintenance-free, wet-type multiple disc brake
system as standard.
! Differential-lock heightens maneuverability on soft terrain (optional)
Internet
Personal
computer terminal
WebCARE Server (for downloading
data)
Komatsu
distributors
Recommendation
An appropriate recommendation can be made by viewing these data over the Internet.
Proper driving methods
Formulation of maintenance plans in advance that suit the customer's production schedule.
Customer's Benefit
Sudden break down can be prevented through utilization of data trend (change over time).
Ascertaining the facts and searching for the cause of the breakdown are simplified, thus enabling
problems to be resolved quickly.
Down time can be shortened by the systematic use of Reman components.
Machine life can be extended significantly by proper operation and proper maintenance.
7A-4
Specifications OFF-HIGHWAY
DUMP TRUCKS
1. Japan source
Model
HD255-5 HD325-6 HD325-6 4WD
Item
WEIGHT: kg (lb)
Empty vehicle weight* 21900 (48,280) 28700 (63,270) 30740 (67,770)
Distribution (front) 10730 (23,660) 13780 (30,380) 15060 (33,200)
(rear) 11170 (24,630) 14920 (32,890) 15380 (33,910)
Gross vehicle weight 46980 (103,570) 60780 (134,000) 62820 (138,490)
Distribution (front) 15030 (33,140) 19450 (42,880) 20730 (45,700)
(rear) 31950 (70,440) 41330 (92,120) 42090 (92,790)
Max. gross vehicle weight** 65200 (143,740) 67320 (148,410)
Gross horsepower HP (kW)/RPM 323 (241)/2100 508 (379)/2000 508 (379)/2000
Flywheel horsepower HP (kW)/RPM 316 (235)/2100 488 (364)/2000 488 (364)/2000
HAULING CAPACITY:
Maximum load ton (U.S. ton) 25 (27.6) 36.5 (40) 36.5 (40)
Heaped capacity (2:1) m3 (yd3) 17.7 (23.2) 24 (31.4) 24 (31.4)
PERFORMANCE:
Maximum speed km/h (MPH) 47 (29.2) 70 (43.5) 68 (42.3)
Turning radius m (ft.in) 7.0 (23') 7.2 (23'7") 7.2 (23'7")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SA6D125E SAA6D140E SAA6D140E
No. of cylinders- 6 6 6
bore stroke mm (in) 125 150 140 165 140 165
(4.92" 5.91) (5.51" 6.50") (5.51" 6.50")
Displacement ltr. (in3) 11.04 (674) 15.23 (930) 15.23 (930)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 16.00-25-28PR 2 18.00-33-28PR 2 18.00-R33 2
Rear tire 16.00-25-28PR 4 18.00-33-28PR 4 18.00-R33 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 380 (100.4) 500 (132.0) 500 (132.0)
Model
HD405-6 HD465-7 HD605-7
Item
WEIGHT: kg (lb)
Empty vehicle weight* 32050 (70,660) 42800 (94,360) 45900 (101,190)
Distribution (front) 14420 (31,790) 20120 (44,360) 21575 (47,560)
(rear) 17630 (38,870) 22680 (50,000) 24325 (53,630)
Gross vehicle weight 72125 (159,010) 97875 (215,780) 108975 (240,250)
Distribution (front) 22850 (50,380) 31320 (69,050) 34870 (76,870)
(rear) 49275 (108,630) 66555 (146,730) 74105 (163,370)
Max. gross vehicle weight** 73175 (161,320) 98800 (217,810) 109900 (242,290)
Gross horsepower HP (kW)/RPM 508 (379)/2000 739 (551)/2000 739 (551)/2000
Flywheel horsepower HP 488 (364)/2000 715 (533)/2000 715 (533)/2000
HAULING CAPACITY:
Maximum load ton (U.S. ton) 41 (45) 55 (61) 63 (69)
Heaped capacity (2:1) m3(yd3) 27.3 (35.7) 34.2 (44.7) 40 (52.3)
PERFORMANCE:
Maximum speed km/h (MPH) 70 (43.5) 70 (43.5) 70 (43.5)
Turning radius m (ft.in) 7.2 (23'7") 8.5 (27'11") 8.5 (27'11")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D140E SAA6D170E SAA6D170E
No. of cylinders- 6 6 6
bore stroke mm (in) 140 165 170 170 170 170
(5.91 6.50) (6.69 6.69) (6.69 6.69)
Displacement ltr. (in3) 15.23 (930) 23.15 (1.413) 23.15 (1413)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 18.00R33 2 24.00-35-36PR 2 24.00R35 2
Rear tire 18.00R33 4 24.00-35-36PR 4 24.00R35 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 500 (132.0) 780 (206.1) 780 (206.1)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded .
7A-5
Specifications OFF-HIGHWAY
DUMP TRUCKS
Model
HD785-5 HD985-5 HD1200-1*5
Item
WEIGHT: kg (lb)
Empty vehicle weight* 66930 (147,550) 73700 (162,480) 100880 (222,400)
Distribution (front) 31460 (69,360) 34640 (76,370) 46730 (103,020)
(rear) 35470 (78,200) 39060 (86,110) 54150 (119,380)
Gross vehicle weight 158005 (348,340) 173780 (383,120) 236880 (52,230)
Distribution (front) 52140 (114,950) 57345 (126,420) 79380 (175,000)
(rear) 105865 (233,390) 116435 (256,690) 157500 (347,220)
Max. gross vehicle weight** 166000 (366,000) 178780 (394,140)
Gross horsepower HP (kW)/RPM 1050 (783)/2000 1050 (783)/2100 1200 (895)/2100
Flywheel horsepower HP (kW)/RPM 1010 (753)/2000 1010 (753)/2100 1160 (875)/2100
HAULING CAPACITY:
Maximum load ton (US ton) 91 (100) 105 (116) 136 (150)
Heaped capacity (2:1) m3 (yd3) 60 (78.5) 64 (83.7) 78 (102.0)
PERFORMANCE:
Maximum speed km/h(MPH) 65 (40.4) 70 (43.5) 57.5 (35.7)
Turning radius m (ft.in) 9.9 (32'6") 12.5 (41') 12.5 (41')
ENGINE: KOMATSU KOMATSU CUMMINS
Model SA12V140 SA12V140 KTA-38-C1200
No. of cylinders- 12 12 12
bore stroke mm (in) 140 165 140 165 159 159
(5.51 6.50) (5.51 6.50) (6.26 6.26)
Displacement ltr. (in3) 30.48 (1860) 30.48 (1860) 37.7 (2300)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 27.00R49** 2 30.00 R51** 2 33.00-51-58PR 2
Rear tire 27.00R49** 4 30.00 R51** 4 33.00-51-58PR 4
CAPACITY: Fuel tank ltr.(U.S. Gal) 1250 (330.3) 1250 (330.3) 1900 (502.0)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded .
*5 136 tons payload
7A-6
Specifications OFF-HIGHWAY
DUMP TRUCKS
2. USA source
Model
HD785-5 HD1500-5 630E***
Item
WEIGHT: kg (lb)
Empty vehicle weight* 69933 (154,178) 100462 (221,481) 124028 (273,430)
Distribution (front) 33568 (74,005) 49025 (108,082) 60215 (132,750)
(rear) 36365 (80,173) 51437 (113,399) 63812 (140,680)
Gross vehicle weight 166468 (367,000) 249476 (550,000) 294840 (650,000)
Distribution (front) 54102 (119,275) 82327 (181,500) 91396 (201,490)
(rear) 112366 (247,725) 167149 (368,500) 203444 (448,510)
Max. gross vehicle weight** 166468 (367,000) 249476 (550,000) 294840 (650,000)
Gross horsepower HP (kW)/RPM 1082 (807)/2000 1486 (1108)/1900 2000 (1492)/1900
Flywheel horsepower HP (kW)/RPM 1042 (777)/2000 1406 (1048)/1900 1860 (1388)/1900
HAULING CAPACITY:
Maximum load ton (US ton) 90.72 (100) 149 (164) 172 (190)
Heaped capacity (2:1) m3 (yd3) 60.1(78.7) 78 (102) 103 (135)
PERFORMANCE:
km/h (MPH)
Maximum speed 61.9 (38.5) 58 (36.0) 51.0 (31.7)
m (ft.in)
Turning radius 9.9 (32'6") 12.2 (40') 12.2 (40')
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA12V140ZE2 SDA12V160 SSA16V159
No. of cylinders- 12 12 16
bore stroke mm (in) 140 165 159 190 159 159
(5.51 6.50) (5.26 7.48) (5.26 5.26)
Displacement ltr. (in3) 30.48 (1860) 45.0 (2746) 50.3 (3069)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 27.00-R49 2 33.00-R51 2 36.00-51 2
Rear tire 27.00-R49 4 33.00-R51 4 36.00-51 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 1250 (330) 2120 (560) 3217 (850.0)
Model
730E 830E 930E-3***
Item
WEIGHT: kg (lb)
Empty vehicle weight* 138369 (305,052) 158159 (349,136) 208580 (459,836)
Distribution (front) 66160 (145,858) 78638 (173,593) 102830 (226,699)
(rear) 72209 (159,194) 79521 (175,543) 105750 (233,137)
Gross vehicle weight 324318 (715,000) 385848 (850,650) 498957 (1,100,000)
Distribution (front) 98941 (218,129) 127330 (280,715) 164656 (363,000)
(rear) 225377 (496,871) 258518 (569,935) 334301 (737,000)
Max. gross vehicle weight** 324318 (715,000) 385848 (850,650) 498957 (1,100,000)
Gross horsepower HP (kW)/RPM 2000 (1492)/1900 2500 (1865)/1900 2700 (2014)/1900
Flywheel horsepower HP (kW)/RPM 1860 (1388)/1900 2360 (1761)/1900 2550 (1902)/1900
HAULING CAPACITY:
Maximum load ton (US ton) 186 (205) 231 (255) 290 (320)
Heaped capacity (2:1) m3 (yd3) 111 (145) 147 (193) 211 (276)
PERFORMANCE:
Maximum speed km/h (MPH) 55.7 (34.6) 48.8 (30.3) 64.5 (40)
Turning radius m (ft.in) 14.0 (46') 14.2 (46'5") 15.2 (48'9")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SSA16V159 SSDA16V160 SSDA16V160
No. of cylinders- 16 16 16
bore stroke mm (in) 159 159 160 190 160 x 190
(5.26 5.26) (5.26 7.48) (6.26 x 7.48)
Displacement ltr. (in3) 50.3 (3069) 64.9 (3968) 60.2 (3674)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 37.00-R57 2 40.00-57 2 53/80-R63 x 2
Rear tire 37.00-R57 4 40.00-57 4 53/80-R63 x 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 3217 (850.0) 4542 (1200) 4542 (1200)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded.
*** Weight includes lubricants, coolant, 50% fuel tank and standard body. Max. gross vehicle weight, including optional equipment,
lubricants, coolant, 50% fuel tank and payload, with large tires installed, shall not be exceeded.
7A-7
Dimensions OFF-HIGHWAY
DUMP TRUCKS
K N
C G
M
S
B
R
Q
H P
D E
J A
Unit: mm (ft.in)
HD325-6
HD255-5 HD325-6 HD405-6 HD465-7 HD605-7 HD785-5 HD785-5** HD985-5
4WD
16.00-25- 18.00-33- 24.00-35-
Tires 18.00-R33 18.00-R33 24.00-R35 27.00-R49 27.00-R49 30.00-R51
28PR 28PR 36PR
7290 8365 8365 8365 9355 9355 10490 10620 10610
A
(23'11") (27'5") (27'5") (27'5") (30'8") (30'8") (34'5") (34'10") (34'10")
3560 4150 4150 4150 4400 4400 5050 5270 5120
B*
(11'8") (13'7") (13'7") (13'7") (14'5") (14'5") (16'7") (17'3") (16'3")
3200 3660 3660 3660 4170 4170 5210 5430 5210
C
(10'6") (12') (12') (12') (13'8") (13'8") (17'1") (17'10") (17'1")
3600 3750 3750 3750 4300 4300 4950 4950 4950
D
(11'10") (12'4") (12'4") (12'4") (14'1") (14'1") (16'3") (16'3") (16'3")
2140 2630 2630 2630 3070 3070 3390 3370 3510
E
(7') (8'8") (8'8") (8'8") (10'1") (10'1") (11'1") (11'1") (11'6")
490 480 480 480 480 490 450 430 350
G
(1'7") (1'7") (1'7") (1'7") (1'7") (1'7") (1'6") (1'5") (1'2")
405 500 500 500 645 645 875 810 875
H
(1'4") (1'8") (1'8") (1'8") (2'1") (2'1") (2'10") (2'8") (2'10")
2700 3150 3190 3150 3515 3515 4230 4230 4420
J
(8'10") (10'4") (10'6") (10'4") (11'6") (11'6") (13'11") (13'11") (14'6")
2180 2550 2550 2550 3080 3080 3500 3500 3720
K
(7'2") (8'4") (8'4") (8'4") (10'1") (10'1") (11'6") (11'5") (12'2")
4570 5500 5500 5590 6450 6600 7480 7760 7550
M
(15') (18'1") (18'1") (18'4") (21'2") (21'8") (24'7") (25'5") (24'9")
2995 3380 3380 3380 3870 3870 4880 4990 4870
N
(9'10") (11'1") (11'1") (11'1") (12'8") (12'8") (16') (16'4") (16')
500 530 530 530 560 560 810 800 855
P
(1'8") (1'9") (1'9") (1'9") (1'10") (1'10") (2'8") (2'7") (2'10")
49 48 48 48 48 48 48 45 47
Q
2940 3200 3200 3430 3600 3860 4285 4290 4545
R
(9'8") (10'6") (10'6") (11'3") (11'10") (12'8") (14'1") (14'1") (14'11")
7060 7885 7885 7885 8800 8800 10080 10210 10135
S
(23'2") (25'10") (25'10") (25'10") (28'10") (28'10") (33'1") (33'6") (33')
* Includes canopy spill guard.
** USA source
7A-8
Dimensions OFF-HIGHWAY
DUMP TRUCKS
K N
C G
M
S
B
R
Q
H P
D E
J A
Unit: mm (ft.in)
HD1200-1** HD1500-5 630E 730E 830E 930E-3***
33.00-51-
Tires 33.00-R51 36.00-51 37.00R57 40.00R57 53/80R63
58PR
10980 11370 11940 12830 13510 15320
A
(36') (37'4") (39'2") (42'1") (44'4") (50'3")
5550 5850 6430 6250 6880 7320
B*
(18'2") (19'2") (21'1") (20'6") (22'7") (24'0")
5800 6090 6650 7250 7260 8690
C
(19') (20'0") (21'10") (23'9") (23'10") (28'6")
5400 5400 5440 5890 6350 6350
D
(17'9") (17'9") (17'10") (19'4") (20'10") (20'10")
3180 3495 3420 3660 3960 4500
E
(10'5") (11'6") (11'3") (12'0") (13'0") (14'9")
450 530 360 290 60
G
(1'6") (1'9") (1'2") (1'0") (2")
780 889 1260 1140 1280 940
H
(2'7") (2'11") (4'2") (3'9") (4'2") (3'1")
5016 5010 5540 5570 5770 6150
J
(16'5") (16'5") (18'2") (18'3") (18'11") (20'2")
4100 4020 4420 4680 4880 5300
K
(13'5") (13'2") (14'6") (15'4") (16'0") (17'4")
7740 7625 7980 8430 9190 9950
M
(25'5") (25'0") (26'2") (27'8") (30'2") (32'7")
5460 5705 6270 6850 6860 8150
N
(17'11") (18'9") (20'4") (22'6") (22'6") (26'9")
1770 1650 1290 1760 1840 1750
P
(5'10") (5'5") (4'3") (5'9") (6'0") (5'9")
47 45 45 45 45 45
Q
4650 4965 5840 5610 6710 7010
R
(15'3") (16'3") (19'2") (18'5") (22'0") (23'0")
11370 11440 11980 12510 13410 13990
S
(37'3") (37'6") (39'4") (41'1") (44'0") (45'11")
* Includes canopy spill guard.
** 136 tons payload
*** 120 tons payload, deep pit type
7A-9
Use of Performance Curve OFF-HIGHWAY
DUMP TRUCKS
How to use the travel performance curve
For assessing a vehicle's grade-ability, travel speed, rim pull, etc. First, draw a vertical line according to the
vehicle's weight (A) and mark the point (B) corresponding to total resistance (the sum of rolling resistance
and grade resistance). Next, draw a horizontal line from (B), then mark (C) where the line intersects the rim
pull curve and read (E) for the rim pull. For travel speed (D), draw a vertical line downward from (C).
For instance, when traveling an 8% gradient and encountering a 5% rolling resistance, a vehicle with a 32 ton
(35-U.S. ton) payload should have a rim pull of 8 tons (17,640 lb) and travel at a speed of 15 km/h (9.3 MPH)
in forward 2nd gear.
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(%)
(A)
-30
-25
F1
-20
F2 -15
F3
-10
F4 (B)
(C) F5
F6
F7 -5
(D)
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0068A
7A-10
HD255-5 OFF-HIGHWAY
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton
kN
Ton
GROSS WEIGHT
500 50 25 35 45 55 65
500 US ton
450 400 40 20 30 40 50 60
400 Ton
UNLOADED LOADED
300 30
2600
300
45.0
200 20 40.0
200
35.0
30.0
1600 25.0
100 10
20.0
100 90 9
90 80 8 DIFF 3.900 Transmision
80 70 7 FINAL 4.941 F1 3.750 15.0
70 6 RD,RA 0.700 F2 2.651 13.0
60 12.0
60 F3 1.957
50 5 F4 1.384
600 50 10.0
40 4 F5 1.000 9.0
F6 0.707 8.0
40 7.0
3
R1 4.149
30 6.0
30
5.0
20 2 4.0
20
RIMPULL
3.0
10 10 1 2.0
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
EMPTY 25 ton (28 US ton) LOADED EMPTY 25 ton (28 US ton) LOADED
TOTAL RESISTANCE (GRADE+ROLLING)%
-30 -30
-25 -25
F1
-20 -20
F1 F2
-15 -15
F2 F3
F4
-10 -10
F3 F5
F6
F4
F5 -5 -5
F6
0 10 20 30 0 10 20 30 40 50 60 MPH
40 50 60 MPH
7A-11
HD255-5 OFF-HIGHWAY
Performance Curve DUMP TRUCKS
Brake performance
GRADE DISTANCE: 600 m (2,000 ft) GRADE DISTANCE: 900 m (3,000 ft)
GROSS WEIGHT GROSS WEIGHT
0 10 20 30 40 50 60 70 80 90 100 ton 0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY 25 ton (28 US ton) LOADED EMPTY 25 ton (28 US ton) LOADED
-25 -25
F1 F1
-20 -20
F2
-15 F2 -15
F3
F3
F4 -10 -10
F5 F4
F6 F5
-5 F6
-5
-30
-25
-20
F1
F2 -15
F3
-10
F4
F5
F7 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FKH00216
7A-12
HD325-6 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
55
50
50 GROSS WEIGHT
45 40 30 40 50 60 70 80 90 100
40 US ton
20 30 40 50 60 70 80 90 100
30 ton
ENGINE SPEED RPM
2600
30 UNLOADED LOADED
20.0
1600
10 15.0
10 9 14.0
9 8 13.0
12.0
8 7 11.0
7 10.0
6 9.0
6 8.0
5
600 5 7.0
4 6.0
4
RIMPULL
5.0
3
3 4.0
2 3.0
2
2.0
1 1
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
FKH00151
Brake performance
-25 -25
F1
F1 F2
-20 -20
F2
-15 F3 -15
F4
F3
-10 F5 -10
F6
F4 F7
F5
F6 -5 -5
F7
0 10 20 30 40 50 60 0 10 20 30 40 50 60 MPH
MPH
7A-13
HD325-6 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
Distance: 600 m (1970 ft) Distance: 900 m (2950 ft)
GROSS VEHICLE WEIGHT GROSS VEHICLE WEIGHT
0 10 20 30 40 50 60 70 80 90 100 110 USton 0 10 20 30 40 50 60 70 80 90 100 110 USton
-25 -25
F1
F1
F2 -20 -20
F2
F3 -15 -15
F3
F4
F5 -10 F4 -10
F6 F5
F7 F6
-5 F7 -5
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(% )
-30
Optional exhaust retarder
-25
F1
-20
F2
-15
F3
F4 -10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0068
7A-14
HD325-6 4WD OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
kN
ton
55 500 50
50 GROSS WEIGHT
45 400 40 30 40 50 60 70
40 US ton
20 30 40 50 60 70 ton
300 30
30 EMPTY 32Ton(35US Ton)LOADED
20.0
100 10 15.0
10 90 9 14.0
13.0
RIMPULL
9 80 8 12.0
8 70 7 11.0
7 10.0
60 6 9.0
6 F1(T/C) 8.0
50 5
5 7.0
40 4 F1(D) 6.0
4
5.0
30 3 F2(T/C)
3 F2(D) 4.0
20 2 F3(D) 3.0
2
2.0
1 10 1
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
FVBH0059 FVBH0060
7A-15
HD325-6 4WD OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
-25 -25
F1 F1
-20
-20
F2 F2 -15
-15
F3 F3
F4 -10 F4 -10
F5 F5
F6 F6
F7 F7 -5
-5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
VEHICLE SPEED
FVBH0061 FVBH0062
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(%)
-30
Optional exhaust retarder
-25
F1 -20
-15
F2
F3
-10
F4
F5
F6 -5
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0063
7A-16
HD405-6 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
55
50
50 GROSS WEIGHT
45 40 40 50 60 70 80 90 100
40 US ton
30 40 50 60 70 80 90 100
30 ton
ENGINE SPEED RPM
2600
UNLOADED LOADED
20.0
1600
15.0
10 14.0
10 9 13.0
12.0
9 8 11.0
8 7 10.0
7 9.0
6 8.0
6
5 7.0
600 5 6.0
4
5.0
RIMPUL L
4
3 4.0
3
3.0
2
2
2.0
1 1
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
-30 -30
Optional exhaust retarder
-25 -25
F1 F1
F2
-20 -20
F2
-15 F3 -15
F4
F3
-10 F5 -10
F6
F4 F7
F5
F6 -5 -5
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
7A-17
HD405-6 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
F1
-25 -25
F1
F2 -20 -20
F2
F3 -15 -15
F3
F4 F4
F5 -10 -10
F5
F6 F6
F7 F7
-5 -5
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(%)
F1
-25
-20
F2
-15
F3
F4 -10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0073
7A-18
HD465-7 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
ton
US ton
50
50 40 50 60 70 80 90 100 110120 US ton
40
40 40 50 60 70 80 90 100 110120 ton
30
30
20 20.0
20
15.0
13.0
11.0
10 10.0
10 9.0
8 8.0
8 7.0
6 6.0
6 5 20.
5.0
5 04.0
4
4
3 3.0
3
2.0
2
2
1
1
0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 45 MPH
FVBH0150
Brake performance
0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 140 160 180 200 220
US ton US ton
ton ton
30
3 25 30
3 25
20 20
F1
15 15
F2
F1
F3
10 10
F2 F4
F5
F6
F3 F7
F4 5 5
F5
F6
F7
7A-19
HD465-7 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 140 160 180 200 220
US ton US ton
ton ton
30
3 25 30
3 25
20 20
F1
F
15 F1 15
F2
F2
F33
F 10 10
F3
F44
F
F55
F F4
F6 F5
F7 F6
5 F7 5
15
F1
F2 10
F3
F4
F5 5
F6
F7
7A-20
HD605-7 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
ton
US ton
50
50 40 50 60 70 80 90 100 110120 US ton
40
40 40 50 60 70 80 90 100 110120 ton
30
30
20.0
20
20 15.0
13.0
11.0
10.0
10 9.0
10 8.0
8 7.0
8
6.0
6
6 5 20.
5.0
5 04.0
4
4 3.0
3
3
2.0
2
2
1
1
0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 45 MPH
FVBH0156
Brake performance
0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 140 160 180 200 220
US ton US ton
ton ton
30 25 30 25
20 20
F1
15 15
F2
F1
F33
10 10
F2 F4
F5
F6
F
F3 F7
F4 5 5
F5
F6
F7
7A-21
HD605-7 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 140 160 180 200 220
US ton US ton
ton ton
30 25 30 25
20 20
F1
F
15 F1 15
F2
F2
F33
F 10 10
F33
F44
F
F55
F F4
F6
F F5
F7 F6
F
5 F7 5
15
F1
F2 10
F33
F4
F5 5
F6
F
F7
7A-22
HD785-5 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
Brake performance
7A-23
HD785-5 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
7A-24
HD785-5* OFF-HIGHWAY
Performance Curves DUMP TRUCKS
* USA sourced
Travel Performance Curve
Brake performance
0 50 100 150 200 250 300 350 400 450 lb x 1000 0 50 100 150 200 250 300 350 400 450 lb x 1000
TOTAL RESISTANCE (GRADE + ROLLING)(%)
5th GEAR
4th GEAR
6th GEAR
5th GEAR 7th GEAR
-5% -5%
6th GEAR
7th GEAR
0 5 10 15 20 25 30 35 40 45 50 mph 0 5 10 15 20 25 30 35 40 45 50 mph
0 10 20 30 40 50 60 70 80 km/h 0 10 20 30 40 50 60 70 80 km/h
7A-25
HD785-5* OFF-HIGHWAY
Performance Curves DUMP TRUCKS
* USA sourced
Brake performance
Grade distance: 600 m (2000 ft) Grade distance: 900 m (3000 ft)
0 50 100 150 200 250 300 350 400 450 lb x 1000 0 50 100 150 200 250 300 350 400 450 lb x 1000
0 5 10 15 20 25 30 35 40 45 50 mph 0 5 10 15 20 25 30 35 40 45 50 mph
0 10 20 30 40 50 60 70 80 km/h 0 10 20 30 40 50 60 70 80 km/h
7A-26
HD985-5 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
110 100 GROSS WEIGHT
100 90 80 90 100 110 120 130 140 160 180 200 220 240 260
90 80 US ton
80 70 80 90 100 110 120 130 140 160 180 200 220 240
70 ton
70
60 UNLOADED LOADED
ENGINE SPEED RPM
2600
30
30 15.0
14.0
1600 13.0
12.0
20 11.0
20 10.0
9.0
8.0
7.0
6.0
10
600 10 9 5.0
9 8
8 7 4.0
RIMPULL
7
6
6 3.0
5
5
4
4 2.0
3
3
2
2 1.0
1
0 10 20 30 40 50 6 0 km/h
0 10 15 20 25 30 35 40 45 MPH
Brake performance
Distance: Continuou
s Distance: 450 m (1500 ft)
GROSS VEHICLE WEIGHT GROSS VEHICLE WEIGHT
0 40 80 120 160 200 240 280 320 360 400 440 USton 0 40 80 120 160 200 240 280 320 360 400 440 USton
0 40 80 120 160 200 240 280 320 360 400 ton 0 40 80 120 160 200 240 280 320 360 400 ton
100ton(110US ton) 100ton(110US ton)
EMPTY LOADED -30 -25 EMPTY LOADED -30 -25
TOTAL RESISTANCE (GRADE+ROLLING)(%)
TOTAL RESISTANCE (GRADE+ROLLING)(%)
-20 -20
F2
F2 -10 -10
F3
F3 F4
F5
F4 -5
-5
F5 F6
F7
F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
FVH00418 FVH00415
7A-27
HD985-5 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Brake performance
0 40 80 120 160 200 240 280 320 360 400 ton 0 40 80 120 160 200 240 280 320 360 400 ton
100ton(110US ton) 100ton(110US ton)
EMPTY LOADED -30 -25 EMPTY LOADED -30 -25
F2
F2 -10 -10
F3 F3
F4 F4
F5 F5
-5 -5
F6 F6
F7 F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
FVH00414 FVH00413
-20
With optional
F1 exhaust retader -15
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVH00417
7A-28
HD1200-1 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel Performance Curve
Travel Speed
Brake performance
Travel Speed
7A-29
HD1500-5 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel performance
Travel Speed
Brake performance
Travel Speed
7A-30
630E OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel performance
Travel Speed
Brake performance
Travel Speed
7A-31
730E OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel performance
Travel Speed
Brake performance
Travel Speed
7A-32
830E OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel performance
Brake performance
7A-33
930E-3 OFF-HIGHWAY
Performance Curves DUMP TRUCKS
Travel performance
Travel Speed
Brake performance
Travel Speed
7A-34
Attachments and Options OFF-HIGHWAY
DUMP TRUCKS
Muffler
Radiator curtain
Differential lock
Three-way emergency brake
Optional tires
Transmission underguard
Mode selection system Engine underguard
Exhaust retarder Propeller shaft guard
Engine emergency shutoff system Vandalism protection kit
Water separator
Fast fill fuel system
Noise suppression kit
Air dryer
Air tank auto-drain valve
7A-35
Attachments and Options OFF-HIGHWAY
DUMP TRUCKS
Description Features
Vehicle condition can be easily monitored to
confirm functions or perform troubleshooting
efficiently.
Stored data can be downloaded through
customer provided personal computer with
PMC (power train management control) Komatsu PMC download software to transfer
the data to customer maintenance/production
database.
Memory card type Payload meter (PLM2) data
can also be downloaded through the same PC
connection port. (HD785/HD985)
Auto Retard Speed Control (ARSC)
Payload meter
The payload meter measures and records the
amount loaded, and also uses the external
display lamps to show the present payload and
to estimate the weight when the next bucket is
loaded, thereby informing the loader operator.
So it is possible to load the most suitable
amount and to avoid overloading.
By knowing the production, it becomes
possible to carry out efficiency control of
combinations, and administration of economic
use of the machines.
Exhaust retarder
7A-36
Attachments and Options OFF-HIGHWAY
DUMP TRUCKS
Description Features
Three-way emergency brake
Differential lock
Body liner
Body extension
This extends the height of the side of the dump body. This
increases the capacity of the body to ensure the rated load
(For example: the capacity of the HD325-5 is 32 tons)
when handling loads with a low specific gravity.
It is also used to prevent spillage of load caused by
adverse travel conditions (rough road surface, uphill slope,
downhill slope, road with curves).
7A-37
Attachments and Options OFF-HIGHWAY
DUMP TRUCKS
Description Features
Muffler (without body heating)
Air dryer
7A-38
Tire Selection OFF-HIGHWAY
DUMP TRUCKS
TIRE SELECTION
Tire availability
Komatsu Dump Trucks employ the tubeless tire only.
Every tire size is classified into E3 or E4 codes.
Either E3 or E4 code had CR, GP or HR characteristics to meet specific operating conditions.
The relation between the tire characteristics and operating conditions is shown in the table.
Model Tires size Code Remark Model Tires size Code Remark
16.00-25-28PR E-3, E-4 27.00-49-48PR E-3, E-4
HD785-5
HD255-5 16.00-25-32PR E-3, E-4 27.00R49 E-3, E-4
16.00R25 E-3, E-4 HD985-5 30.00R51 E-3, E-4
18.00-33-32PR E-3, E-4 30.00-51-46PR E-4
HD325-6 18.00-33-28PR E-3, E-4 30.00-51-50PR E-4
HD1200-1
18.00R33 E-3, E-4 * 30.00-51-58PR E-4
18.00 R 33 E-3, E-4 30.00R51 E-4
HD325-6 4WD
29.55R25 HD1500-5 33.00R51
HD405-6 18.00R33 E-3, E-4 36.00-51
630E
24.00-35-36PR E-3, E-4 36.00R51
HD465-7
24.00R35 E-3, E-4 730E 37.00R51
24.00R35 E-3, E-4 40.00-57
HD605-7 830E
24.00-35-48PR E-3, E-4 40.00R57
930E-3 53/80R63
NOTE: *When installing radial tires, please use the special rim for radial tire.
TMPH RATING
Where the ambient temperature in an operating environment is high or where a long haul or high-speed drive is required,
the standard tires are sometimes unsuitable because of their small TMPH.
Under the above operating conditions, it is recommended that the optimum tires be determined after obtaining TMPH by
applying the formulas stated in the section 15 and referring to the following table.
NOTE: The TMPH rating is based on U.S. ton (not on metric ton)
TMPH = TKPH 1.46
BRIDGESTONE TOYO
Model Tire size Code
Pattern HR STD CR Pattern HR SP CR CE
E-3 RL 139 G-18 175 145
HD255-5 16.00-25
E-4 RLS 111 G-18ET 145 124
E-3 RL 212 190 G-18 211 182
HD325-6
18.00-33 G-18ET 167 145
HD405-6 E-4 ELS2 182 161
G-36ET 145 109
HD465-7 E-3 RL 328 291 G-18 371 327 284
24.00-35
HD605-7 E-4 RLS 394 277 234 G-18ET 298 269 225 211
E-3 EL 701 G-18 611
HD785-5 27.00-49
E-4 ELS 409 350 G-18ET 720 592 306 291
HD1200-1 33.00-51 E-4 ELS 533 G-18ET 531 444 415
630E 36.00-51 E-4 ELS 649 526 G-18ET 854 671 533
830E 40.00-57 E-4 G-18ET 948 693 591
NOTE: 1. The TKPH in the table is the value at 38C an ambient temperature. (The value as of February, 2000.) When
the distance for the round trip exceeds 5 km, the tire life is governed by the travel conditions, so check with the
tire maker for details of the TKPH when selecting the tires.
2. The value for TKPH is reviewed from time to time by the tire maker, so consult the maker for the latest values.
3. For details of the TKPH value and tire specifications for conditions not given in this table, please consult the
tire maker.
7A-39
Tire Selection OFF-HIGHWAY
DUMP TRUCKS
Table 1-2 TKPH for main types of bias tire
YOKOHAMA
Model Tire size Code
Pattern HR-H HR-V R-R R-T CR-S CR-C
E-3 Y67 153 139 129
HD255-5 16.00-25
E-4 Y523 131 117 102
E-3 Y67 255 212 233 190
HD325-6
18.00-33 Y523 219 182 197 153
HD405-6 E-4
Y523U 168 1117 146
HD465-7 E-3 Y87 379 314 343 277
24.00-35
HD605-7 E-4 Y523 321 263 292 175 226
E-3 Y67 584 642 481 525 409
HD785-5 27.00-49
E-4 Y523 452 495 387 416 263 336
HD1200-1 33.00-51 E-4 Y523 584 642 511 554 350 430
E-3 Y565 905 992
Y523 888 751 569 627 379 461
630E 36.00-51
E-4 Y523R 888 751 569 627 379 461
Y535 730 802 620 686 423 526
830E 40.00-57 E-4 Y523 715 788 598 657 409 511
Table 2-1 TKPH for radial tire (for round trip of less than 5km)
BRIDGESTONE MICHELIN
Model Tire size Code
Pattern HR STD CR Pattern A4 A B4 B
E-3 XK 187
HD255-5 16.00R25 VRLS 168 146 112 XHD1 105 128 175
E-4
VMTS 179 157 123 XKD1 162
XK 279
E-3 VEL 307 263 213
HD325-6 XR 305
18.00R33
HD405-6 XDT 157 262
E-4 VRLS 246 211 170
XKD1 122 157 227
XK 474
E-3 VEL 524 448 362
HD465-7 XR 518
24.00R35
HD605-7 VRLS 453 388 314 XDT 266 348
E-4
VRLS 453 388 314 XKD1 207 266 302
XK 698
E-3 VRL 753 644 521
XR 763
HD785-5 27.00R49
VRLS 600 513 415 XDT 392 654
E-4
VMTS 702 600 486 XKD1 392 480 567
XK 858
E-3 VMT 1065 911 737
XR 938
HD985-5 30.00R51
XHD1 482 590 697 804
E-4 VRLS 717 603 496
XKD1 429 536 643
E-4 VRLS 807 690 558 XDT 558 930
HD1500-5 33.00R51
E-4 VMTS 953 815 660 XKD1 496 620 744
XR 1295
630E 36.00R51 E-4 VRLS 927 781 642 XK 1184
XKD1 592 740 888
730E 37.00R51 E-4 VRLS 1003 845 694 XKD1 678 1018
XKD1 768 960 1152
830E 40.00R57 E-4 VELS 1117 940 773
XKR1 1152
930E-3 53/80R63 E-4
NOTE: 1.The TKPH in the table is the value at 38C an ambient temperature. (The value as of February 2000.) When the
distance for the round trip exceeds 5km, the tire life is governed by the travel conditions, so check with the tire
maker for details of the TKPH when selecting the tires.
2. The value for TKPH is reviewed from time to time by the tire maker, so consult the maker for the latest values.
3. For details of the TKPH value and tire specifications for conditions not given in this table, please consult the
tire maker.
7A-40
Tire Selection OFF-HIGHWAY
DUMP TRUCKS
Table 2-2 TKPH for radial tire (for round trip of less than 5km)
TOYO YOKOHAMA
Model Tire size Code
Pattern HR SP CR Pattern HR SP CR
E-3
HD255-5 16.00R25
E-4 RB41 162 160 124
HD325-6 E-3
18.00R33
HD405-6 E-4 T-432 218 167 124
HD465-7 T-433 378 284 211
24.00R35 E-4
HD605-7 T-452 349 255 196
T-432 545 422 327
HD785-5 27.00R49 E-4 T-433/
516 393 305
T-452
HD985-5 30.00R51 E-4 429
HD1500-5 33.00R51 E-4 T-431 625 582 473
630E 36.00R51 E-4 T-431 786 720 797
730E 37.00R57 E-4 T-433 1018 844 676
830E 40.00R57 E-4
930E-3 53/80R63
NOTE: 1.The TKPH in the table is the value at 38C an ambient temperature. (The value as of February 2000.) When the
distance for the round trip exceeds 5km, the tire life is governed by the travel conditions, so check with the tire
maker for details of the TKPH when selecting the tires.
2. The value for TKPH is reviewed from time to time by the tire maker, so consult the maker for the latest values.
3. For details of the TKPH value and tire specifications for conditions not given in this table, please consult the
tire maker.
7A-41
Body selection OFF-HIGHWAY
DUMP TRUCKS
1. Body selection
When it comes to selecting the body, it is necessary to consider the specific work application, size of rocks,
specific gravity of material and loading machines etc.
Select the optimum body according to the chart shown below.
If similar dump trucks are working at a specific job sites, please refer to the body types used when making
selection.
1 2 3 4
Selection Selection Selection
Selection of canopy of
of
of body spill guard tailgate
body
2) Rock body
Rock body is suitable for job sites requiring
the handling of rocks such as macadam, in
limestone mines and for civil engineering etc.
Total face of inner body is lined with steel
liners.
3) Rubber liner body
Rubber liner body is suitable for job sites
where large diameter rocks such as ripraps
are loaded.
Rubber liners are installed on the bottom face
of the body and steel liners are installed on
the other faces.
7A-42
Body selection OFF-HIGHWAY
DUMP TRUCKS
7A-43
Body selection OFF-HIGHWAY
DUMP TRUCKS
3. Available body
HD985-5
Model HD785-5
64m3 (83.7 yd3) 70m3(91.6 yd3)
Liner less Liner body Rubber liner Liner less Liner body Liner less Liner body
Body type
body (STD) (OP) body (OP) body (STD) (OP) body (STD) (OP)
Rock type x
Steel liner 4-face liner
Liner
Half liner
Rubber liner t =105mm (4.1 in) x x x x x x
200mm (7.9 in) x x x x x x x
Body extension 250mm (9.8 in) x x x x x x x
300mm (11.8 in) x x x x x x x
150mm (5.9 in)
200mm (7.9 in)
Canopy spill guard
250mm (9.8 in)
300mm (11.8 in)
Tailgate ( ) ( ) x
7A-44
Body selection OFF-HIGHWAY
DUMP TRUCKS
4. Liner thickness of rock body and weight
HD325-6 No. Part
Plate thickness
mm (in)
1 Bottom plate 19 (0.75)
2 Side plate 12 (0.47)
3 Front plate (center) 16 (0.63)
4 Front plate (side) 12 (0.47)
5 Canopy top plate 9 (0.35)
6 Corner (bottom-side) 12 (0.47)
7 Corner (bottom-front) 12 (0.47)
8 Canopy corner (center) 16 (0.63)
9 Canopy corner (side) 12 (0.47)
Liner weight kg (lb) 4235 (9,340)
HD465-7
Rock body with 200 mm (7.9 in) body extension Plate thickness
No. Part
mm (in)
1 Bottom plate 19 (0.75)
2 Side plate 12 (0.47)
3 Front plate (center) 16 (0.63)
4 Front plate (side) 12 (0.47)
5 Canopy top plate 9 (0.35)
6 Canopy top plate (front) 6 (0.24)
7 Corner (bottom-side) 12 (0.47)
8 Corner (bottom-front) 12 (0.47)
9 Canopy corner (center) 16 (0.63)
10 Canopy corner (side) 12 (0.47)
Liner weight kg (lb) 5950 (13,120)
7A-45
Body selection OFF-HIGHWAY
DUMP TRUCKS
HD605-7 Liner (Option 1)
Plate thickness
No. Part
mm (in)
1 Bottom plate 14 (0.55)
2 Side plate
3 Front plate (center)
4 Front plate (side)
5 Canopy top plate
6 Corner (bottom-side)
7 Corner (bottom-front)
8 Canopy corner (center)
9 Canopy corner (side)
Liner weight kg (lb) 995 (2,190)
7A-46
Body selection OFF-HIGHWAY
DUMP TRUCKS
HD985-5 70m3 (91.6 cu.yd) body liner
Plate thickness
No. Part
mm (in)
1 Bottom plate 16 (0.63)
2 Side plate 12 (0.47)
3 Front plate (center) 12 (0.47)
4 Front plate (side) 12 (0.47)
5 Canopy top plate 9 (0.35)
6 Corner (bottom-side) 12 (0.47)
7 Corner (bottom-front) 12 (0.47)
8 Corner (front-side) 12 (0.47)
9 Canopy corner (center) 12 (0.47)
10 Canopy corner (side) 12 (0.47)
Liner weight kg (lb) 7654 (16,870)
7A-47
Body selection OFF-HIGHWAY
DUMP TRUCKS
5. Liner thickness of rubber liner body and
weight
HD325-6 Plate thickness
No. Part
mm (in)
1 Bottom plate (rubber) 105 (4.13)
2 Side plate 16 (0.63)
3 Front plate (center) 22 (0.87)
4 Front plate (side) 16 (0.63)
5 Canopy top plate 9 (0.35)
6 Corner (bottom-side) 16 (0.63)
7 Corner (bottom-front) 16 (0.63)
8 Canopy corner (center) 22 (0.87)
9 Canopy corner (side) 16 (0.63)
10 Bottom plate rear (stopper) 100 100 (3.94 3.94)
Liner weight kg (lb) 5095 (57,230)
7A-48
Body selection OFF-HIGHWAY
DUMP TRUCKS
HD985-5
Extension Item HD785-5 64 m3 70 m3
(83.7 cuyd) (91.6 cuyd)
Body capacity m3 40.0/60.0 45.0/64.0 48.0/70.0
Without body Struck/heaped (yd3) (52.3/78.5) (58.9/83.7) (62.8/91.6)
extension Loading height 4285 4545 4565
mm (ft.in) (14'1") (14'11") (15')
Body capacity m3
200 mm Struck/heaped (yd3)
(7.9 in) Loading height
mm (ft.in)
Body capacity m3
250 mm Struck/heaped (yd3)
(9.8 in) Loading height
mm (ft.in)
Body capacity m3
300 mm Struck/heaped (yd3)
(11.8 in) Loading height
mm (ft.in)
30.00-R51 30.00-R51
Installed tire size 27.00-R49
(E3) (E4)
Remarks *: Standard equipment for HD465-7 rock body
7A-49
Body selection OFF-HIGHWAY
DUMP TRUCKS
2) Body extension selection table
HD325-6
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
HD465-7
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
HD785-6
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
FVBH0269
7A-50
Body selection OFF-HIGHWAY
DUMP TRUCKS
7. Canopy spill guard selection
Canopy spill
guard
FVBH0035
HD985-5
Spill guard height Item HD605-7 HD785-5 64 m3 70 m3
(83.7 cu.yd) (91.6 cu.yd)
Mounting method
Weld-on
150 mm (5.9 in)
Overall height
4400 (14'5")
mm (ft.in)
**Weld-on **Weld-on **Weld-on
Mounting method
(STD) (STD)
200 mm (7.9 in)
Overall height 5050 5120 5140
mm (ft.in) (16'7") (16'10") (16'10")
Mounting method
*Weld-on *Weld-on *Weld-on *Weld-on
300 mm (11.8 in)
Overall height
4550 (14'11") 5150 (16'11") 5220 (17'2") 5240 (17'2")
mm (ft.in)
Installed tire size 24.00R35 27.00-R49 30.00-R51(E3) 30.00-R51(E4)
Remarks *: When installing optional spill guard, remove standard or other spill guard.
*: 200 mm (7.9 in) spill guard is standard equipment.
7A-51
Body selection OFF-HIGHWAY
DUMP TRUCKS
8. Tailgate selection
(1) Purpose of tailgate
1) Prevention of spill
Prevents spill of loading material from body
rear. It facilitates the hauling of soil and sand
having high fluidity and high water content.
2) Reduced operating cost
There is no worry about spill of loading
material, so material can be loaded evenly.
Because load on front tires is reduced, tire
life is extended.
Load balance for machine is improved,
leading to improved dump truck durability.
FVBH0257
7A-52
Production OFF-HIGHWAY
DUMP TRUCKS
TRAVEL TIME (One way)
UNIT: MIN.
AVERAGE TRAVEL SPEED KM/HR (MPH)
DISTANCE ONE WAY
5 10 15 20 25 30 35 40 45 50 55 60
METERS FEET (3.1) (6.2) (9.3) (12.4) (15.5) (18.6) (21.7) (24.9) (28.0) (31.1) (34.2) (37.3)
50 160 0.60 0.30 0.20 0.15 0.12 0.10 0.09 0.88 0.07 0.06 0.05 0.05
100 330 1.20 0.60 0.40 0.30 0.24 0.20 0.17 0.15 0.13 0.12 0.11 0.10
200 660 2.40 1.20 0.80 0.60 0.48 0.40 0.34 0.30 0.27 0.24 0.22 0.20
300 980 3.60 1.80 1.20 0.90 0.72 0.60 0.51 0.45 0.40 0.36 0.33 0.30
500 1640 6.00 3.00 2.00 1.50 1.20 1.00 0.86 0.75 0.67 0.60 0.55 0.50
1000 3280 12.00 6.00 4.00 3.00 2.40 2.00 1.71 1.50 1.33 1.20 1.09 1.00
1500 4920 18.00 9.00 6.00 4.50 3.60 3.00 2.57 2.25 2.00 1.80 1.64 1.50
2000 6560 24.00 12.00 8.00 6.00 4.80 4.00 3.43 3.00 2.67 2.40 2.18 2.00
3000 9840 36.00 18.00 12.00 9.00 7.20 6.00 5.14 4.50 4.00 3.60 3.27 3.00
5000 16410 60.00 30.00 20.00 15.00 12.00 10.00 8.57 7.50 6.67 6.00 5.45 5.00
Cycle time = Loading time + Hauling time +Dumping time + Return time + Spot & delay time
Determine hauling and return time from the above table respectively.
Loading time = (Loader cycle time) (No. of cycles to fill dump truck)
Average fixed time (dumping, spot & delay): 1.25 ~ 1.65 min.
7A-53
MEMO
SECTION 7B
ARTICULATED
DUMP TRUCKS
CONTENTS
Features .................................................................... 7B-2
Specifications ........................................................... 7B-4
Dimensions ............................................................... 7B-5
Use of performance curve ....................................... 7B-6
Performance curve
HM300-1 ................................................................ 7B-7
HM350-1 ................................................................ 7B-8
HM400-1 ................................................................ 7B-9
Ground pressure .................................................... 7B-10
Tire Selection .......................................................... 7B-12
7B-1
Features ARTICULATED
DUMP TRUCKS
! Comfortable operator environment Hydropneumatic Suspension for All
Terrain
Wide, Spacious Cab The hydropneumatic suspension assures a
The wide cab provides a comfortable space for comfortable ride even over rough terrain and
the operator and a full size buddy seat. Large, ensures maximum productivity and operator
electrically operated windows and the operators confidence.
seat positioned to the left side ensure superior
visibility. Air Suspension Seat
The air suspension fabric covered seat which is
Ergonomically Designed Cab adjustable to the operators weight is provided as
The ergonomically designed operators standard.
compartment makes it very easy and comfortable
for the operator to use all the controls. Electric Body Dump Control Lever
The extra light lever makes dumping easier than
Viscous Cab Mounts ever.
Viscous mounts reduce the noise transmitted to
the cab and achieve a quiet noise level. Supplementary Steering and Secondary
Brakes
Supplementary steering and secondary brakes
are standard features.
Easy-to-See Instrument Panel
The instrument panel makes it easy to monitor
critical machine functions. In addition a caution
light warns the operator of any problems that may
occur. Problems are recorded in the monitor and
indicated as service codes.
Rubber This makes the machine very friendly and easy to
service.
Silicon oil Steering Wheel and Pedals
Low effort pedals reduce driver fatigue when
working continuously for long periods. The
tiltable, telescoping steering column enables
! Easy maintenance operators to maintain the optimum driving
position at all times.
Tiltable cab
The cab can be tilted rearward to provide easy Fewer Grease Points
maintenance/service for the engine and We have minimized the number of grease points
transmission. by using maintenance-free rubber bushings and a
lubrication-free oscillating hitch.
Rear frame
Front frame
7B-2
Features ARTICULATED
DUMP TRUCKS
! High productivity Komatsu Designed Electronically
Controlled Transmission
High performance SAA6D125E-3 and Komatsu designed Electronically Controlled
SAA6D140E-3 Komatsu engines transmission called K-ATOMiCS has been
Those engine delivers faster acceleration and successfully employed in Komatsus rigid dump
higher travel speeds with the highest trucks. The electronic clutch modulation system
horsepower per ton in its class. ensures proper clutch pressure when the clutch is
The engines meets the USA EPA Tier 2 engaged. the total control system controls both
emission regulations. the engine and transmission by monitoring the
vehicle conditions. This high technology system
High torque at low speed, impressive assures smooth shifts without shock.
acceleration and low fuel consumption ensure
maximum productivity. Hydropneumatic Suspension
Interaxle & Differential Locking Systems The hydropneumatic suspension has been
proven on Komatsus rigid dump trucks. The front
The full-time six-wheel drive system reduces axle suspension employs De Dion type design,
slippage. A wet multiple-disc interaxle clutch also allowing the machine to ride more smoothly over
locks the three axles in unison for greater traction. bumps. The rear-axles are mounted on a dynamic
The interaxle lock and differential locks can be equalizer structure equipped with
switched on and off while the truck is traveling, hydropneumatic suspension.
thereby boosting productivity.
Large Capacity Body and Box Section Fully Hydraulically Controlled Wet
Frame Structure Multiple-Disk Brakes and Retarder
The body is built of thick wear-resistant steel with Wet multiple-disk brakes have been proven on
a Brinell hardness of 400, and the body shape Komatsu dump trucks and wheel loaders. They
provides excellent load stability. ensure highly reliable and stable brake
performance. The large-capacity wet-multiple
Articulated Steering disk brakes also function as a highly responsive
Fully hydraulic articulated steering offers low- retarder which gives the operator great
effort operating performance and maneuverability. confidence while traveling downhill.
Small minimum turning radius provides the
freedom to move about in confined areas.
7B-3
Specifications ARTICULATED
DUMP TRUCKS
Model
HM300-1 HM350-1 HM400-1
Item
WEIGHT: kg (lb)
Empty vehicle weight* 22500 (49,600) 28550 (62,940) 30300 (66,800)
Distribution (front) 12770 (28,150) 15850 (34,920) 16790 (37020)
(center) 5000 (11,020) 6350 (14,000) 6755 (14,890)
(rear) 4730 (10,430) 6350 (14,000) 6755 (14,890)
Gross vehicle weight 49875 (109,950) 60925 (134,320) 66875 (147,430)
Distribution (front) 14860 (10710) 18545 (40,880) 19055 (42,010)
(center) 17805 (39,250) 21190 (46,720) 23910 (51,120)
(rear) 17210 (37,940) 21190 (46,720) 23910 (51,120)
Gross horsepower HP (kW)/RPM 335 (250)/2000 399 (298)/2000 444 (331)/2000
Flywheel horsepower HP (kW)/RPM 324 (242)/2000 389 (290)/2000 430 (321)/2000
HAULING CAPACITY:
Maximum payload ton (U.S. ton) 27.3 (30.1) 32.3 (35.6) 36.5 (40)
Heaped capacity (2:1) m3 (yd3) 16.6 (21.7) 19.8 (25.9) 22.3 (29.2)
PERFORMANCE:
Maximum speed km/h (MPH) 59.0 (36.7) 57.0 (35.4) 58.6 (36.4)
Turning radius m (ft.in) 7.96 (26'1") 8.4 (27'7") 8.7 (28'7")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D125E SAA6D140E SAA6D140E
No. of cylinders- 6-125 150 6-140 165 6-140 165
bore stroke mm (in) (4.92 5.91) (5.51 6.50) (5.51 6.50)
Displacement ltr. (in3) 11.04 (674) 15.24 (930) 15.24 (930)
DIMENSION: See DIMENSIONS
CAPACITY:Fuel tank ltr. (U.S. Gal) 382 (100.9) 495 (130.8) 495 (130.8)
* Weight includes lubricants, coolant, full fuel tank and standard body.
7B-4
Dimensions ARTICULATED
DUMP TRUCKS
T
S
J K
N
Q
B
M
H P
D E F G
C A
FVBH0162
Unit: mm (ft.in)
HM300-1 HM350-1 HM400-1
Tires 23.5 R25 26.5 R25 29.5 R25
A 10095 (33'1") 10730 (35'2") 11025 (36'2")
B 3500 (11'6") 3595 (11'10") 3700 (12'2")
C 2900 (9'6") 3250 (10'8") 3450 (11'4")
D 2280 (7'6") 2590 (8'6") 2690 (8'10")
E 4100 (13'5") 4350 (14'3") 4350 (14'3")
F 1710 (5'7") 1850 (6'1") 1970 (6'6")
G 1695 (5'7") 1645 (5'5") 1820 (6'0")
H 510 (1'8") 585 (1'11") 620 (2'0")
J 1600 (5'3") 1600 (5'3") 1600 (5'3")
K 4965 (16'3") 5250 (17'3") 5400 (17'9")
M 2790 (9'2") 2840 (9'4") 2970 (9'9")
N 6445 (21'2") 7035 (23'1") 7130 (23'5")
P 605 (2'0") 720 (2'4") 720 (2'4")
Q (deg.) 70 70 70
R (deg.) 45 45 45
S 7960 (26'1") 8400 (27'7") 8700 (28'7")
T 4010 (13'2") 4060 (13'4") 4170 (13'8")
7B-5
Use of Performance Curve ARTICULATED
DUMP TRUCKS
Use of travel performance curve
For assessing a vehicle's grade-ability, travel speed, rim pull, etc. First, draw a vertical line according to the
vehicle's weight (A) and mark the point (B) corresponding to total resistance (the sum of rolling resistance
and grade resistance). Next, draw a horizontal line from (B), then mark (C) where the line intersects the rim
pull curve and read (E) for the rim pull. For travel speed (D), draw a vertical line downward from (C).
For instance, when traveling an 8% gradient and encountering a 5% rolling resistance, a vehicle with a 36.5
ton (40-U.S. ton) payload should have a rim pull of 8.5 tons (18,740 lb) and travel at a speed of 10 km/h (6.2
MPH) in forward 2nd gear.
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60(A)70 80 90 ton
30 F1
30 EMPTY LOADED
10.0
7 6 9.0
6 8.0
5 F4 7.0
5
4 6.0
4 5.0
3 F5
3 4.0
2 F6 3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
(D)
TRAVEL SPEED
7B-6
HM300-1 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30
30 EMPTY LOADED
25.0
10 20.0
9 F2
10
9 8 15.0
7 14.0
8
RIMPULL
13.0
7 6 F3 12.0
11.0
6 5 10.0
9.0
5 8.0
4 F4
4 7.0
6.0
3
3 F5
5.0
4.0
2
2 F6
3.0
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
WITH EXHAUST(OPTION)
-35
-30
F1
-25
-20
F2
-15
F3
-10
F4
F5 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0165
7B-7
HM350-1 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30 F1
30 EMPTY LOADED
40.0
F2 20.0
10 15.0
10 9 14.0
9 8 F3 13.0
12.0
8 7
RIMPULL
11.0
7 10.0
6
9.0
6 5 8.0
5 F4
7.0
4
6.0
4
5.0
3 F5
3 4.0
2 F6
3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
WITH EXHAUST(OPTION)
-35
F1
-30
-25
F2
-20
F3 -15
F4 -10
F5
F6 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0167
7B-8
HM400-1 ARTICULATED
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30 F1
30 EMPTY LOADED
F2 20.0
10 15.0
14.0
10 9 13.0
9 8 F3 12.0
11.0
8 7
RIMPULL
10.0
7 6 9.0
6 8.0
5 F4 7.0
5
4 6.0
4 5.0
3 F5
3 4.0
2 F6 3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
GRADE DISTANCE : COUNTINUOUS DESENT
0 10 20 30 40 50 60 70 80 90 100 110 US ton
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED -50 -45
-40
WITHOUT EXHAUST
TOTAL RESISTANCE (GRADE + ROLLING) (%)
WITH EXHAUST(OPTION)
-35
F1
-30
-25
F1
F2 -20
F2 -15
F3
F3
-10
F4
F4 F5
F5 -5
F6
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0169
7B-9
Ground Pressure ARTICULATED
DUMP TRUCKS
HM300-1
Tire
23.5R25 750/65R25
Item
WEIGHT: kg (lb)
Empty vehicle weight* 22500 (49,600) 23545 (51,910)
Distribution (front) 12770 (28,150) 13125 (28,940)
(center) 5000 (11,020) 5345 (11,780)
(rear) 4730 (10,430) 5075 (11,190)
Gross vehicle weight 49875 (109,950) 50920 (112,260)
Distribution (front) 14860 (10,710) 15220 (33,550)
(center) 17805 (39,250) 18125 (39,960)
(rear) 17210 (37,940) 17575 (38,750)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 1750 (271.3) 2150 (333.3)
Center tire 845 (131.0) 970 (150.4)
Rear tire 800 (124.0) 950 (147.3)
Loaded: Front tire 1960 (303.8) 2380 (368.9)
Center tire 2230 (345.7) 2575 (399.1)
Rear tire 2160 (334.8) 2510 (389.1)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.65 (51.9/357.9) 3.05 (43.4/299.1)
Center tire 2.96 (42.1/290.3) 2.76 (39.2/270.7)
Rear tire 2.96 (42.1/290.3) 2.67 (38.0/261.8)
Loaded: Front tire 3.79 (53.9/371.7) 3.20 (45.5/313.8)
Center tire 3.99 (56.7/391.3) 3.52 (50.1/345.2)
Rear tire 3.98 (56.6/390.3) 3.50 (49.8/343.2)
* Weight includes lubricants, coolant, full fuel tank and standard body.
HM350-1
Tire
Item 26.5R25 800/65R29
WEIGHT: kg (lb)
Empty vehicle weight* 28550 (62,940) 30034 (66,210)
Distribution (front) 15850 (34,920) 16378 (36,110)
(center) 6350 (14,000) 6828 (15,050)
(rear) 6350 (14,000) 6828 (15,050)
Gross vehicle weight 60925 (134,320) 62409 (137,590)
Distribution (front) 18545 (40,880) 18973 (41,830)
(center) 21190 (46,720) 21718 (47,880)
(rear) 21190 (46,720) 21718 (47,880)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 2400 (372.0) 2662 (412.6)
Center tire 1160 (179.8) 1707 (264.6)
Rear tire 1160 (179.8) 1707 (264.6)
Loaded: Front tire 2700 (418.5) 2932 (454.5)
Center tire 2650 (410.8) 3170 (491.4)
Rear tire 2650 (410.8) 3170 (491.4)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.30 (46.9/323.6) 3.08 (43.8/302.0)
Center tire 2.74 (39.0/268.7) 2.00 (28.4/196.1)
Rear tire 2.74 (39.0/268.7) 2.00 (28.4/196.1)
Loaded: Front tire 3.43 (48.8/336.4) 3.24 (46.1/317.8)
Center tire 4.00 (56.9/392.3) 3.43 (48.8/336.4)
Rear tire 4.00 (56.9/392.3) 3.43 (48.8/336.4)
* Weight includes lubricants, coolant, full fuel tank and standard body.
7B-10
Ground Pressure ARTICULATED
DUMP TRUCKS
HM400-1
Tire
29.5R25 875/65R29
Item
WEIGHT: kg (lb)
Empty vehicle weight* 30300 (66,800) 31260 (68,920)
Distribution (front) 16790 (37,020) 17110 (37,720)
(center) 6755 (14,890) 7075 (15,600)
(rear) 6755 (14,890) 7075 (15,600)
Gross vehicle weight 66875 (147,430) 67835 (149,550)
Distribution (front) 19055 (42,010) 19375 (42,710)
(center) 23910 (51,120) 24230 (53,420)
(rear) 23910 (51,120) 24230 (53,420)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 2570 (398.4) 3350 (519.3)
Center tire 1170 (181.4) 2050 (317.8)
Rear tire 1170 (181.4) 2050 (317.8)
Loaded: Front tire 2900 (449.5) 3660 (567.3)
Center tire 3300 (511.5) 3980 (616.9)
Rear tire 3300 (511.5) 3980 (616.9)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.27 (46.5/320.7) 2.55 (36.3/250.1)
Center tire 2.89 (41.1/283.4) 1.73 (24.6/169.7)
Rear tire 2.89 (41.1/283.4) 1.73 (24.6/169.7)
Loaded: Front tire 3.29 (46.8/322.6) 2.65 (37.7/259.9)
Center tire 3.62 (51.5/355.0) 3.04 (43.2/298.1)
Rear tire 3.62 (51.5/355.0) 3.04 (43.2/298.1)
* Weight includes lubricants, coolant, full fuel tank and standard body.
7B-11
Tire Selection ARTICULATED
DUMP TRUCKS
TIRE SELECTION GUIDE FOR ARTICULATED DUMP TRUCKS
HM300-1
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
23.5 R25 BS VKT CR E2 4.5 Soft and muddy surfaces Good traction and floatation
Rubber volume of tread ratio
Wet, soft and muddy (VKT:1, VLT:1.25)
23.5 R25 BS VLT CR E2 4.5
surface Exellent maneuverability,
traction and floatation
23.5 R25 GY RL-2+ E2 4.5
23.5 R25 GY GP-2B E2 4.5 Smoother ride and good traction
23.5 R25 MC XADN E2 4.5
Soft surface and hard soil High wear-resistance, cut and
23.5 R25 TY T-331 CR E3 4.5
field tip-resistance
F:3.5 Wet, soft and muddy
750/65 R25 BS VLT CR E2 Good traction and floatation
C,R:4.1 surface
F:3.5
750/65 R25 GY RL-2+ E2
C,R:4.1
F:3.5
750/65 R25 MC XAD65-1 E3
C,R:4.1
HM350-1
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
26.5 R25 BS VKT CR E2 4.5 Soft and muddy surfaces Good traction and floatation
Rubber volume of tread ratio
(VKT:1, VLT:1.25)
26.5 R25 BS VLT CR E2 4.5 Soft and muddy surfaces
Exellent maneuverability,
traction and floatation
High wear-resistance, cut-
26.5 R25 BS VLTS CR E4 4.5 Soft and muddy surfaces resistance because of deep
tread (STD:1, VLTS:1.5)
26.5 R25 GY RL-2+ E2 4.5
26.5 R25 GY GP-2B E2
26.5 R25 GY TL-3A+ E3
26.5 R25 GY GP-4B AT E4
26.5 R25 MC XADN E3T E3
26.5 R25 MC XADT E4T E4 4.5
26.5 R25 MC XADN E3V E3 4.5
Soft surface and under Good traction, anti-sideways slip
26.5 R25 TY T-351 E3 ground and cut-resistance
800/65 R29 GY GP-4D E4 4.0
HM400-1
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
High wear-resistance, cut-
29.5 R25 BS VLTS CR E4 Soft and muddy surfaces
resistance
29.5 R25 BS VKT CR E2 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 BS VLT E2 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 BS VKT E2 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 GY RL-2+ E2 4.1
29.5 R25 GY GP-2B E2
29.5 R25 GY GP-4B AT E4
29.5 R25 MC XADN E3T E3
29.5 R25 MC XADN E3V E3
29.5 R25 MC XADT E4T E4 4.0
Soft surface and under Good traction, anti-sideways slip
29.5 R25 TY T-351 E3 ground and cut-resistance
875/65 R29 GY GP-4D E4 4.5
875/65 R29 MC XAD65-1 E3 4.5
* Tire maker.........BS:BRIDGESTONE GY:GOODYEAR MC:MICHELIN TY:TOYO
7B-12
Tire Selection ARTICULATED
DUMP TRUCKS
TIRE PATTERN
BRIDGESTONE
GOODYEAR
MICHELIN
TOYO
7B-13
ARTICULATED
DUMP TRUCKS
MEMO
7B-14
SECTION 7C
SLAG DUMP TRUCKS
CONTENTS
Features specifications ........................................... 7C-2
7C-1
Features and Specifications SLAG DUMP TRUCKS
The slag dump trucks are based on the off-highway dump trucks.
Main components such as engines, power trains and frames are commonly used on construction
machinery and are of proven strength, thus providing superior durability, reliability and parts supply.
All work equipment can be operated from the cab.
In addition, outrigger and pot pins are also operable from outside the cab thus ensuring greater safety.
Pot loading / unloading has been simplified on self-loading specification trucks, by the use of hooks which
have been mounted on the arm.
The arm, table and cab have been designed taking the heat factor into full consideration for safe
operation.
Comfortable cab, superior front visibility and ball-screw steering enable smooth, light operation for
superior operability.
The installation of large-size tires, adoption of sintered alloy for the clutch lining and changed spring have
led to an increased torque capacity ratio among other improvements.
Therefore trucks have more than enough durability for heavy-duty operations.
Specifications
7C-2
CONTENTS
INDEX
SECTION 8
MOTOR GRADERS
CONTENTS
Features .......................................................................8-2
Specifications ..............................................................8-4
Dimensions ..................................................................8-6
Attachment Availability ..............................................8-8
Scarifier Specifications ..............................................8-9
Front Dozer Blade Specifications ............................8-12
Rear Mounted Ripper Specifications ......................8-13
Upper Attachments ...................................................8-14
Tire Availability and TMPH .......................................8-15
Attachments and Options ........................................8-16
8-1
Features MOTOR GRADERS
8-2
Features MOTOR GRADERS
! Max. uptime
Non-spin differential
Non-spin differential with automatic locking and
unlocking can be installed as an option on the
final drives, assuring the optimum in smooth
steering.
8-3
Specifications MOTOR GRADERS
Model
GD510R-1 GD511A-1 GD555-3A GD555-3C*6
Item
OPERATING WEIGHT* kg (lb) 10700 (23,590) 10800 (23,810) 13050 (28,770) 13850 (30,525)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 125 (93)/2500 135 (101)/2900 160 (119)/2000 160 (119)/2000
DIN PS (kW)/rpm 127 (93)/2500 137 (101)/2900 162 (119)/2000 162 (119)/2000
PERFORMANCE:
Travel speeds: km/h (MPH) Low/ High
Forward 1st 3.9 (2.4)/8.6 (5.3) 3.4 (2.1) 3.3 (2.1) 3.3 (2.1)
2nd 7.0 (4.3)/15.5 (9.6) 6.1 (3.8) 4.8 (3.0) 4.8 (3.0)
3rd 12.5 (7.8)/27.5 (17.1) 10.7 (6.6) 6.8 (4.2) 6.8 (4.2)
4th 19.5 (12.1)/42.9 (26.7) 14.1 (8.8) 9.8 (6.1) 9.8 (6.1)
5th 25.5 (15.8) 14.9 (9.3) 14.1 (9.3)
6th 44.5 (27.7) 21.6 (13.4) 21.6 (13.4)
7th 29.6 (18.4) 29.6 (18.4)
8th 42.9 (26.7) 42.9 (26.4)
Reverse (Max.) 26.6 (16.5) 54.4 (33.8) 39.0 (24.2) 39.0 (24.2)
Max. traction (Drawbar pull) kg (lb) 6080 (13,400) 6140 (13,535) 7920 (17,460) 7920 (17,460)
Min. turning radius** mm (ft.in) 10400 (34'1") 6600 (21'8") 6800 (22'4") 6800 (22'4")
DIMENSIONS:
Treads: Front mm (ft.in) 2020 (6'8") 2020 (6'8") 2130 (7'0") 2130 (7'0")
Rear mm (ft.in) 2020 (6'8") 2020 (6'8") 2130 (7'0") 2130 (7'0")
Articulation angle (each) degree 27 23 23
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D95L S6D95L SA6D102E SA6D102E
No. of cylinders- mm (in) 6-95 115 6-95 115 6 102 120 6 102 120
bore stroke (3.74 4.53) (3.74 4.53) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (in3) 4.89 (298) 4.89 (298) 5.88 (359) 5.88 (359)
CAPACITY
Fuel tank ltr. (U.S. Gal) 227 (60.0) 227 (60.0) 340 (90) 340 (90)
Model
Item GD611A-1 GD655-3A GD655-3C*6 GD661A-1
OPERATING WEIGHT* kg (lb) 12500 (27,555) 14000 (30,860) 14800 (32,630) 13300 (29,320)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 155 (116)/2500 190 (142)/1990 190 (142)/1900 180 (134)/2500
DIN PS (kW)/rpm 157 (116)/2500 193 (142)/1900 193 (142)/1900 182 (134)/2500
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.5 (2.2) 3.3 (2.1) 3.3 (2.1) 3.5 (2.2)
2nd 6.3 (3.9) 4.7 (2.9) 4.7 (2.9) 6.3 (3.9)
3rd 10.8 (6.7) 6.7 (4.2) 6.7 (4.2) 10.8 (6.7)
4th 14.8 (9.2) 9.7 (6.0) 9.7 (6.0) 14.8 (9.2)
5th 26.2 (16.3) 14.6 (9.1) 14.6 (9.1) 26.2 (16.3)
6th 44.6 (27.7) 21.2 (13.2) 21.2 (13.2) 44.6 (27.7)
7th 29.1 (18.1) 29.1 (18.1)
8th 42.1 (26.2) 42.1 (26.2)
Reverse (Max.) 54.4(33.8) 38.3 (23.8) 38.3 (23.8) 54.4 (33.8)
Max. traction (Drawbar pull) kg (lb) 7100 (15,650) 8460 (18,650) 8460 (18,650) 7400 (16,315)
Min. turning radius** mm (ft.in) 6900 (22'8") 6900 (22'8") 6900 (22'8") 6900 (22'8")
DIMENSIONS:
Treads: Front mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Rear mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Articulation angle(each) degree 26 23 23 26
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D105 SA6D114E S6D114E S6D105
No. of cylinders- mm (in) 6 105 120 6 114 135 6 114 135 6 105 125
bore stroke (4.13 4.92) (4.49 5.32) (4.49 5.32) (4.13 4.92)
Piston displacement ltr. (in3) 6.49 (396) 8.27 (505) 8.27 (505) 6.49 (396)
CAPACITY
Fuel tank ltr. (U.S. Gal) 285 (75.3) 340 (90) 340 (90) 285 (75.3)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*6 USA version
8-4
Specifications MOTOR GRADERS
Model
GD675-3A GD675-3C*6 GD705A-4 GD825A-2
Item
OPERATING WEIGHT* kg (lb) 14800 (32,630) 15600 (34,390) 17620 (38,580) 26350 (58,090)
FLYWHEEL HORSEPOWER:
SAE HP (kW)/rpm 200 (149)/1900 200 (149)/1900 200 (149)/2000 280 (209)/2100
DIN PS (kW)/rpm 202 (149)/1900 203 (149)/1900 202 (149)/2000 284 (209)/2100
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.3 (2.1) 3.3 (2.1) 3.9 (2.4) 4.0 (2.5)
2nd 4.7 (2.9) 4.7 (2.9) 5.2 (3.2) 5.4 (3.4)
3rd 6.7 (4.2) 6.7 (4.2) 7.6 (4.7) 8.0 (5.0)
4th 9.7 (6.0) 9.7 (6.0) 11.5 (7.1) 11.5 (7.1)
5th 14.6 (9.1) 14.6 (9.1) 15.0 (6.8) 15.8 (9.8)
6th 21.2 (13.2) 21.2 (13.2) 20.5 (12.7) 21.4 (13.3)
7th 29.1 (18.1) 29.1 (18.1) 30.0 (18.6) 31.3 (19.4)
8th 42.1 (26.2) 42.1 (26.2) 43.0 (26.7) 44.9 (27.9)
Reverse (Max.) 38.3 (23.8) 38.3 (23.8) 45.9 (28.5) 47.9 (29.8)
Max .traction (Drawbar pull) Kg (lb) 8920 (19,670) 8460 (18,650) 10180 (22,420) 14705 (32,420)
Min. turning radius** mm (ft.in) 6900 (22'8") 6900 (22'8") 7500 (24'7") 7900 (25'11")*5
DIMENSIONS:
Treads: Front mm (ft.in) 2130 (7'0") 2130 (7'0") 2300 (7'7") 2620 (8'7")
Rear mm (ft.in) 2130 (7'0") 2130 (7'0") 2300 (7'7") 2620 (8'7")
Articulation angle (each) degree 23 23 26 25
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D114E SA6D114E S6D125 S6D140E
No. of cylinders- mm (in) 6 114 135 6 114 135 6 125 150 6-140 165
bore stroke (4.49 5.31) (4.49 5.31) (4.9 5.9) (5.51 6.50)
Piston displacement ltr. (in3) 8.27 (505) 8.27 (505) 11.05 (674) 15.24 (930)
CAPACITY
Fuel tank ltr. (U.S. Gal) 340 (90) 340 (90) 400 (105.7) 500 (132.1)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*5 With differential
*6 USA version
8-5
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
8-6
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
8-7
Attachment Availability MOTOR GRADERS
:Standard equipment
:Optional equipment
Model GD GD GD GD GD GD GD GD GD
Item 510R-1 511A-1 555-3A 611A-1 655-3A 661A-1 675-3A 705A-4 825A-2
BLADE
2.2 m (7.2 ft)
2.5 m (8.2 ft)
2.8 m (9.2 ft)
3.05 m (10 ft)
3.1 m (10.2 ft)
3.4 m (11.2 ft)
3.7 m (12.1 ft)
4.0 m (13.1 ft)
4.3 m (14.1 ft)
4.9 m (16.1 ft)
VARIABLE BLADE
HYDRAULIC BLADE TIP
CONTROL
EXTENSION BLADE
FRONT DOZER BLADE
SCARIFIER
5 teeth
6 teeth
7 teeth
9 teeth
11 teeth
REPLACEBLE TIP
TEETH FOR SCARIFIER
REAR MOUNT RIPPER
PUSH PLATE
8-8
Scarifier Specifications MOTOR GRADERS
Model
500 SERIES *3
Item
NO. OF TEETH 9
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +660 (+1,460) +665 (+1,470)
[+685 (+1,510)] [+690 (+1,520)]
To front axle +565 (+1,250) +570 (+1,260)
[+585 (+1,290)] [+590 (+1,300)]
To rear axle +95 (+210) +95 (+210)
[+100 (+220)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 4440 (9,790) 4335 (9,560)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 51 ~ 64
Max. lift above ground mm (ft.in) 340 (1'1") [530 (1'9")] 320 (1'1") [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") [290 (11.4")] 260 (10.2") [290 (11.4")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 660 (1,460) 665 (1,470)
B: Digging width mm (ft.in) 1065 (3'6") 1090 (3'7")
Tooth:
As-installed mm (in) 275 77 25 185 50 36.3
Height width thickness (10.8 3.0 1.0) (7.3 2.0 1 .4)
APPLICABLE MODEL GD510R*3 GD510R*3
GD511A*3 GD511A*3
Model
500 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +690 (+1,520) +565 (+1250) +695 (+1,530) +570 (+1260)
[+715 (+1,580)] [+575 (+1270)] [+720 (+1,590)] [+585 (+1290)]
To front axle +590 (+1,300) +470 (+1040) +595 (+1,310) +475 (+1050)
[+610 (+1,340)] [+475 (+1050)] [+615 (+1,360)] [+485 (+1070)]
To rear axle +100 (+220) +95 (+210) +100 (+220) +95 (+210)
[+105 (+230)] [+100 (+220)] [+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 1005 (3'4") 850 (2'9") 960 (3'2")
and center of front tire
SCARIFIER LOAD* kg (lb) 4470 (9,850) 5335 (11,760) 4265 (9,400) 5295 (11,670)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 63 ~ 78 51 ~ 64 53 ~ 69
Max. lift above ground mm (ft.in) 340 (1'1") 350 (1'2") 320 (1'1") 320 (1'1")
[530 (1'9")] [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") 255 (10") 260 (10.2") 265 (10.4")
[290 (11.4")] [365 (1'2")] [290 (11.4")] [365 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 690 (1,520) 565 (1250) 695 (1,530) 570 (1260)
B: Digging width mm (ft.in) 1325 (4'4") 1405 (4'7") 1350 (4'5") 1430 (4'8")
Tooth:
As-installed mm (in) 275 77 25 185 50 36.3
Height width thickness (10.8" 3.0" 1.0") (7.3" 2.0" 1.4")
GD510R*3 GD555-3 GD510R*3 GD555-3
GD511A*3 GD511A*3
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod
8-9
Scarifier Specifications MOTOR GRADERS
Model
600 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight +710 (+1,570) [+720 (+1,590)] +715 (+1,580) [+725 (+1,600)]
kg (lb)
To front axle +615 (+1,360) [+620 (+1,370)] +615 (+1,360) [+625 (+1,380)]
To rear axle +95 (+210) [+100 (+220)] +100 (+220) [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 5055 ~ 5125 (11,140 ~ 11,300) 4753 ~ 5435 (10,480 ~ 11,980)
SCARIFIER RANGE:
Digging angle degree 63 ~ 76 53 ~ 66
Max. lift above ground mm (ft.in) 320 (1'1") 300 (1')
Max. digging depth mm (ft.in) 270 (10.6") 270 (10.6")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 710 (1,570) 715 (1,580)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed mm (in) 275 77 25 185 50 36.3
Height width thickness (10.8" 3.0" 1.0") (7.3" 2.0" 1.4")
APPLICABLE MODEL GD611A*3 GD611A*3
GD661A*3 GD661A*3
Model
600 SERIES
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +640 (+1,410) +645 (+1,420)
[+650 (+1,430)] [+655 (+1,440)]
To front axle +535 (1,180) +545 (1,200)
[+545 (+1,200)] [+555 (+1,220)]
To rear axle +105 (+230) +100 (+220)
[+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 980 (3'3") 935 (3'1")
and center of front tire
SCARIFIER LOAD* kg (lb) 5670 (12,500) 5635 (12,420)
SCARIFIER RANGE:
Digging angle degree 62 ~ 77 52 ~ 68
Max. lift above ground mm (ft.in) 370 (1'3") 340 (1'1")
Max. digging depth mm (ft.in) 245 (9.6") [345 (1'2")] 250 (9.8") [345 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 640 (1,410) 645 (1,420)
B: Digging width mm (ft.in) 1405 (4'7") 1430 (4'8")
Tooth:
As-installed 275 77 25 185 50 36.3
Height width thickness mm (in) (10.8" 3.0" 1.0") (7.3" 2.0" 1.4")
APPLICABLE MODEL GD655-3A, GD675-3A GD655-3A, GD675-3A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod.
8-10
Scarifier Specifications MOTOR GRADERS
Model GD705A-4
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +1040 (+2,290) +1050 (+2,310)
To front axle +880 (+1,940) +890 (+1,960)
To rear axle +160 (+350) +160 (+350)
DIMENSIONS:
A: Distance between teeth mm (ft.in) 890 (2'11') 830 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 6690 (14,750) 6630 (14,620)
SCARIFIER RANGE:
Digging angle degree 54~67.5 49~63
Max. lift above ground mm (ft.in) 630 (2'1") 610 (2')
Max. digging depth mm (ft.in) 350 (1'2") 350 (1'2")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 1040 (2,290) 1050 (2,310)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed 265 77 25 185 50 36.3
Height width thickness mm (in) (10.4 3.0 1.0) (7.3 2.0 1.4)
APPLICABLE MODEL GD705A GD705A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
[ ] : When installing the adjustable type lifting rod.
8-11
Front Dozer Blade MOTOR GRADERS
Specifications
Model GD705A-4
Item
ADDITIONAL WEIGHT:
To operating weight kg (lb) +970 (+2,140)
To front axle +1100 (+2,450)
To rear axle (140 (310)
ADDITIONAL OVERALL
LENGTH:
A: Distance between blade mm (ft.in) 1610 (5'3")
edge and center of front
tire
BLADE RANGE:
Digging angle degree 55
Max. lift above ground mm (ft.in) 555 (1'10")
Max. drop below ground mm (ft.in) 110 (4.3")
BLADE EQUIPMENT:
Type Front arc, box section type
hydraulically controlled
Weight kg (lb) 910 (2,010)
Length height mm (ft.in) 2500 850
(8'2" 2'9")
APPLICABLE MODEL GD705A
*: As the front counterweight is removed when installing the front blade, "Additional weight" differs from "Blade weight".
8-12
Rear Mounted Ripper MOTOR GRADERS
Specifications
8-13
Upper Attachments MOTOR GRADERS
8-14
Tire Availability and TMPH MOTOR GRADERS
8-15
Attachments and Options MOTOR GRADERS
ROPS cab
ROPS canopy
Steel cab
Canopy
Rear under
Extension blade view mirror
Hydraulic tip control
Blade accumulator
Blade float
Rear mounted ripper
8-16
Attachments and Options MOTOR GRADERS
Description Features
ROPS (Roll Over Protective Structure) cab
The combination of ROPS and a steel cab ensures
safety in places where there is danger of the machine
turning over and to protect the operator from wind, rain,
cold, sand and sun.
Low profile and full height cabs are available. Full height
ROPS cab is 90 mm (3.5")higher than the low profile
cab.
ROPS canopy
8-17
Attachments and Options MOTOR GRADERS
Description Features
Front blade
Push plate
Scarifier
This attachment digs up hard ground, like asphalt, old
pavement and frozen surfaces cannot be removed by
the blade. The number of teeth used depends upon the
ground hardness.
High-strength alloy steel tips can be mounted on the
teeth to prevent tooth wear and extend their service for
economical performance.
Extension blade
Blade accumulator
8-18
Attachments and Options MOTOR GRADERS
Description Features
Blade float
Wet type disc brake The brakes are sealed type, so no water or mud can get
in.
This ensures stable braking at all times. Oil lubrication
means wear is kept to the minimum, so the brakes are
maintenance free.
The brakes are operated pneumatically, so a small
operating effort of brake pedal gives secure braking.
There are two brake circuits, so even if one of the air
circuits should be damaged, it is still possible to brake
the machine.
Air dryer
8-19
MEMO
CONTENTS
INDEX
SECTION 9
VIBRATORY ROLLERS Sec 9A
TIRE ROLLERS Sec 9B
SECTION 9A
VIBRATORY ROLLERS
CONTENTS
Features .................................................................... 9A-2
Specifications ........................................................... 9A-3
Dimensions ............................................................... 9A-5
9A-1
Features VIBRATORY ROLLERS
9A-2
Specifications VIBRATORY ROLLERS
Model
JV06H-3 JV08H-3 JV25CW-2 JV25DW-2
Item
WEIGHT (approx.): kg (lb)
Operating weight 600 (1,320) 700 (1,540) 2440 (5,380) 2560 (5,640)
Weight distribution:
Front drum 250 (550) 300 (660) 1350 (2,980) 1250 (2,760)
Rear drum 350 (770) 400 (880) 1090 (2,400) 1310 (2,890)
Flywheel horsepower HP (kW)/RPM 4.9 (3.7)/2200 6.1 (4.6)/2000 25.3 (18.9)/2300 25.3 (18.9)/2300
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 1st 4.0 (2.5) 4.0 (2.5) 10.0 (6.2) 10.0 (6.2)
2nd
Cycle of vibration: CPM
Front drum 3300 3300 3300 3300
Rear drum 3300 3300 3300
Centrifugal force: kg (lb)
Front drum 600 (1320) 750 (1650) 2100 (4630) 2100 (4630)
Rear drum 600 (1320) 750 (1650) 2100 (4630)
Compacting width mm (ft.in) 600 (2') 700 (2'4") 1200 (3'11") 1200 (3'11")
Turning radius m (ft.in) 3.8 (12'6") 3.8 (12'6")
ENGINE: YAMMAR YAMMAR KOMATSU KOMATSU
Model NFAD6 NFAD8 3D84E 3D84E
No. of cylinders- 174 72 178 80 3 84 90 3 84 90
bore stroke mm (in) (2.9 1 2.83) (3.07 3.15) (3.3 3.54) (3.3 3.54)
Piston displacement ltr. (in3) 0.309 (18.9) 0.382 (23.3) 1.496 (91.3) 1.496 (91.3)
TRANSMITTING SYSTEM:
Transmission HST HST HST HST
Gearshift Stepless Stepless Stepless Stepless
Reverser Swash-plate Swash-plate Swash-plate Swash-plate
type type type type
Variable- Variable- Variable- Variable-
capacity pump capacity pump capacity pump capacity pump
Final drive Spur gear Spur gear Planetary gear Planetary gear
CAPACITY:
Fuel tank ltr. (U.S. Gal) 5.6 (1.48) 7.1 (1.9) 36 (9.5) 36 (9.5)
Model
JV25W-2 JV40DW-5 JV40CW-5 JV100A-2
Item
WEIGHT (approx.): kg (lb)
Operating weight 2510 (5,530) 4000 (8,820) 3600 (7,940) 10100 (22,270)
Weight distribution:
Front drum 1250 (2,760) 2000 (4,410) 2000 (4,410) 5300 (11,680)
Rear drum 1260 (2,780) 2000 (4,410) 1600 (3,530) 4800 (10,580)
Flywheel horsepower HP (kW)/RPM 25.3 (18.9)/2300 27.6 (20.6)/2550 27.6 (20.6)/2550 133 (99.2)/2000
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 1st 10.0 (6.2) 8.0 (5.0) 8.7 (5.4) 8.3 (6.2)
2nd 10.5 (6.5) 12.0 (7.5) 14.1 (8.8)
Cycle of vibration: CPM
Front drum 3300 3300 3300 1000~1850
Rear drum 3300
Centrifugal force: kg (lb)
Front drum 2100 (4,630) 2500 (5,510) 2500 (5510) 6200 (13,670)~
23700 (52,250)
Rear drum 2500 (5,510)
Compacting width mm (ft.in) 1200 (3'11") 1300 (4'3") 1300 (4'3") 2130 (7')
Turning radius m (ft.in) 3.8 (12'6") 4.3 (14'1") 4.3 (14'1") 5.7 (18'8")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D84E 3D84E 3D84E S6D102E
No. of cylinders- 3 84 90 3 84 86 3 84 86 6 102 120
bore stroke mm (in) (3.3 3.54) (3.3 3.39) (3.3 3.39) (4.02 4.72)
Piston displacement ltr. (in3) 1.496 (91.3) 1.429 (87.2) 1.429 (87.2) 5.88 (359)
TRANSMITTING SYSTEM:
Transmission HST HST HST HST
Gearshift Stepless Stepless Stepless 2-forward,
Reverser Swash-plate Swash-plate Swash-plate 2-reverse
type type type Swash-plate
Variable- Variable- Variable- type
capacity pump capacity pump capacity pump Variable-
capacity pump
Final drive Planetary gear Planetary gear Planetary gear Planetary gear
CAPACITY:
Fuel tank ltr. (U.S. Gal) 36 (9.5) 47 (12.4) 47 (12.4) 260 (68.7)
9A-3
Specifications VIBRATORY ROLLERS
Model
JV100WP-2 JV100WA-2
Item
WEIGHT: kg (lb)
Operating weight 11250 (24,800) 10750 (23,700)
Weight distribution:
Front drum 5950 (14,220) 5950 (13,120)
Rear drum 4800 (10,580) 4800 (10,580)
Flywheel horsepower HP (kW)/RPM 133 (99.2)/2000 133 (99.2)/2000
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 1st 6.0 (3.7) 6.0 (3.7)
2nd 11.0 (6.8) 11.0 (6.8)
Cycle of vibration: CPM
Front drum 1000~1800 1000~1800
Rear drum
Centrifugal force: kg (lb)
Front drum 7300 (16,090)~ 3500 (7720)~
23700 (52,250) 23700 (52,250)
Rear drum
Compacting width mm (ft.in) 2130 (7') 2130 (7')
Turning radius m (ft.in) 5.7 (18'8") 5.7 (18'8")
ENGINE: KOMATSU KOMATSU
Model S6D102E S6D102E
No. of cylinders- 6 102 120 6 102 120
bore stroke mm (in) (4.02 4.72) (4.02 4.72)
Piston displacement ltr. (in3) 5.88 (359) 5.88 (359)
TRANSMITTING SYSTEM:
Transmission HST HST
Gearshift 2-forward, 2-forward,
Reverser 2-reverse 2-reverse
Swash-plate Swash-plate
type type
Variable- Variable-
capacity pump capacity pump
Final drive Planetary gear Planetary gear
CAPACITY:
Fuel tank ltr. (U.S. Gal) 260 (68.7) 260 (68.7)
9A-4
Dimensions VIBRATORY ROLLERS
D
D C
C
O B
R O B
R L
W
W
L
Unit : mm (ft.in)
JV06H-3 JV08H-3 JV25W-2 JV25DW-2
650 750 1290 1290
W
(2'2") (2'6") (4'3") (4'3")
2370 2585 2625 2625
L
(7'9") (8'6") (8'7") (8'7")
1075 1100 1600 1600
H
(3'6") (3'7") (5'3") (5'3")
600 700 1200 1200
R
(2') (2'4") (3'11") (3'11")
520 570 1950 1950
B
(1'8") (1'10") (6'5") (6'5")
230 225 337.5 337.5
O
(9") (9") (1'1") (1'1")
220 250 195 195
C
(8") (10") (8") (8")
355 406 675 675
D
(1'2") (1'4") (2'3") (2'3")
JV25CW-2
JV40CW-5
D
C
O B
R L
W
Unit : mm (ft.in)
JV25CW-2 JV40DW-5 JV40CW-5 JW40CW-5*
1290 1390 1390 1390
W
(4'3") (4'8") (4'8") (4'8")
2623 3100 3105 3105
L
(8'7") (10'2") (10'2") (10'2")
1600 1730 1730 1730
H
(5'3") (5'8") (5'8") (5'8")
1200 1300 1300 1300
R
(3'11") (4'3") (4'3") (4'3")
1950 2300 2300 2300
B
(6'5") (7'7") (7'7") (7'7")
337.5 400 400 400
O
(1'1") (1'4") (1'4") (1'4")
195 280 280 280
C
(7.7") (11") (11") (11")
675 800 800 800
D
(2'3") (2'7") (2'7") (2'7")
* : With wide tires
9A-5
Dimensions VIBRATORY ROLLERS
Unit: mm (ft.in)
JV100A-2 JV100WP-2 JV100WA-2
2350 2350 2350
W
(7'9") (7'9") (7'9")
5600 5600 5600
L
(18'4") (18'4") (18'4")
2950 2950 2950
*H
(9'8") (9'8") (9'8")
2130 2130 2130
R
(7') (7') (7')
1532 1532 1532
r
(5') (5') (5')
2130 2130 2130
T
(7') (7') (7')
A 36 36 36
2985 2985 2985
B
(9'10") (9'10") (9'10")
410 410 410
C
(1'4") (1'4") (1'4")
1520 1520 1520
D
(5') (5') (5')
d
9A-6
SECTION 9B
TIRE ROLLER
CONTENTS
Features .................................................................... 9B-2
Specifications ........................................................... 9B-3
9B-1
Features TIRE ROLLER
9B-2
Specifications TIRE ROLLER
Model
JW30-2
Item
WEIGHT (approx.):
Operating weight 3000 (6,610)
Weight distribution: kg (lb)
Front wheel HP (kW)/RPM 1770 (3,900)
Rear wheel 1230 (2,710)
Flywheel horsepower 21.3 (15.9)/2400
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 13.0 (8.1)
Compacting width mm (ft.in) 1300 (4'3")
Side overhang mm (in)
Left 90 (3.5")
Right 90 (3.5")
Turning radius m (ft.in) 3.8 (12'6")
ENGINE: KOMATSU
Model 3D78AE
No. of cylinders- mm (ft.in) 3 78 84
bore stroke (3.07 3.31)
Piston displacement ltr. (in3) 1.204 73.5)
TRANSMITTING SYSTEM:
Transmission HST
Gearshift Stepless
Reverser Swash-plate
type
variable-
capacity pump
Final drive Chain type
Tires
Front tire 9.50/65-6PR 4
Rear tire 9.50/65-6PR 4
CAPACITY:
Fuel tank ltr. (U.S. Gal) 36 (9.5)
Dimensions
9B-3
MEMO
CONTENTS
INDEX
SECTION 10
ROUGH TERRAIN CRANES Sec 10A
REACH TOWER CRANES Sec 10B
SECTION 10A
ROUGH TERRAIN
CRANES
CONTENTS
Features .................................................................. 10A-2
Specifications ......................................................... 10A-6
Dimensions ............................................................. 10A-9
Total Rated Loads:
LW100-1 ............................................................ 10A-10
LW250-5 ............................................................ 10A-13
LW500-1 ............................................................ 10A-17
Working Radius vs. Lifting Height ...................... 10A-21
10A-1
Features ROUGH TERRAIN
CRANES
LW100-1
Greater working range with compact style
This new generation compact style provides a
working range that is higher and has greater
reach, resulting in a more capable machine. With
maximum lift heights of 26.8 m (87'11") (jib) and
23.0m (75'6") (boom) and work radius of 24.3 m
(79'9") (jib) and 20.3 m (66'7") (boom), lifting work
can be carried out stable with a highly rigid six-
section boom whose new design minimizes slack.
New equipment, slides, and three-stage
tilt jib
A jib that boasts a length of 3.4 m (11'2") housed
in a highly rigid, six-section 21.5 m (70'6") boom
that is compact and yet offers outstanding work
capabilities, and a sliding system makes
deployment and retraction of the jib extremely Tilt jib can be set at three different angles
easy.
Separate hook function
When the jib is extended 0.7 m (2'4"), the cable of the main hook is prevented from becoming entangled
with the cable of the auxiliary hook, which facilitates smoother and safer operation.
Flat nose gives the feel of a car
This configuration results in a flat nose in which the boom tip does not stick out from the front of the
chassis, giving the operator the impression that he is at the wheel of a car during both driving and parking.
Smallest rear swing radius in its class
The outrigger on the lifting side can be extended
greatly to allow for safer and easier operation in
tight work places. 3.38m(11'1")
Rear swing radius: 1.35 m (4'5")
Front swing radius: 1.43 m (4'8")
Slim enough to fit into the tightest of 4.7m
(15'5
spots ")
The minimum right-angle road width is only 3.38 3.38m
m (11'1") which is also the narrowest in the class. (11'1") FVBH0076
10A-2
Features ROUGH TERRAIN
CRANES
LW100-1
Our powerful air-conditioning system
offers a comfortable interior
This equipment has a highly effective air
conditioning system with a high capacity
dehumidifying function.
FVBH0078
10A-3
Features ROUGH TERRAIN
CRANES
LW250-5
Newly equipped with a high rigidity five-section boom
This newly designed five-section boom has high rigidity. Higher lifting operations over a wider range can
be performed with minimal deflection and good stability.
Maximum boom length: 32.0 m (105')
Maximum lift height jib: 47.7 m (156'6")
Maximum total rated load: 26 ton 3.0m (27.7U.S ton 9'10")
Short nose with five-section boom
The LW250 is equipped with a short five-section
boom, leading to the achievement of a short
nose. Compared to conventional 25 ton class 4.5m(14'9")
machines, the boom overhang can be made
about 2 meters shorter, making the overall length
of the vehicle very compact.
7.2m
(23'7
Smallest tail swing radius and front ")
swing radius in its class 5.4m
(17'9")
Compact design in all areas of the equipment FVBH0074
makes the overall size compact.
Rear swing radius: 2.95 m (9'8")
Front swing radius: 2.0 m (6'7")
Four-mode steering allows for tight turns
The steering system, which fully shows the ability
for the short nose to enter narrow spaces, has
four modes: front 2 wheel steering, rear 2 wheel
steering, club steering and 4 wheel steering.
The LW250 is also equipped with a reverse
steering compensation function, which can be
easily operated from within the cab.
Low noise level is gentle to the surrounding area
For rough terrain cranes, which often have to operate in cities in the depth of night, it is vital to keep the
operating noise level down. Our equipment has been designed to take into consideration the surrounding
environment.
[76 dB (A) at 7 m (23')]
Most spacious cab in its class
With the LW250, there's plenty of room in the 930 mm width interior, which is the most spacious in the 25
ton class. The advance cockpit has a well designed layout making instruments easy to read, and the high
quality, sophisticated interior design gives a relaxed feeling like that of a passenger car with plenty of room
to stretch your legs.
Our powerful air conditioning system
offers a comfortable interior
This equipment has a highly effective air
conditioning system with a high capacity
dehumidifying function.
10A-4
Features ROUGH TERRAIN
CRANES
Graphic and digital displays
A new addition to our safety system is the multi-
safety job monitor (TOWAS).
Graphic Display
Information relating to work conditions is
displayed in both message and graphic form,
helping to keep work conditions safe.
Digital Display
Total rated load, actual load, jib angle, boom
angle, lifting height/boom length, rated work
radius, and actual rated work radius is shown with
a digital display.
FVBH0034
Air-over-hydraulic
four-wheel disc brakes
New body style with less vibration
Our significantly shorter nose with the five-section boom and a long wheel base reduce travel pitch. The
standard-equipped tires are high load 385/95R25 radials with good road surface gripping properties and
good travel stability.
Viscous mount allows for reduced cab
vibration
For the cab mount, we've chosen a viscous
mount using rubber and silicone.
This effectively absorbs chassis vibration,
reducing cab vibration.
Viscous mount
10A-5
Specifications ROUGH TERRAIN
CRANES
Model
LW100-1 LW250-5
Item
CRANE PERFORMANCE:
Maximum rated load* kg m 4.1 m boom 10000 2.5 7.6 m boom 26000 3.0
(lb ft.in) (13'5") (22,050 8'2") (24'11") (57,320 9'10")
7.6 m boom 5000 4.5 13.7 m boom 21000 3.5
(24'11") (11,020 14'9") (44'11") (46,300 11'6")
11.1 m boom 5000 4.0 19.8 m boom 14500 4.5
(36'5") (11,020 13'1") (65') (31,970 14'9")
14.5 m boom 4000 4.5 25.9 m boom 10600 5.5
(47'7") (8,820 14'9") (85') (23,370 18'1")
18.0 m boom 40004.0 30.5 m boom 7000 8.0
(59'1") (8,82013'1") (100') (15,430 26'3")
21.5 m boom 23006.0 32.0 m boom 5900 8.0
(70'6") (5,070 19'8") (105') (13,010 26'3")
21.5 + 0.7 m jib 1400 8.0 30.5 + 7.4 m jib 3000 (70)
(70'6" + 2'4") (3,090 19'8") (100' + 24'3") (6,610)
21.5 + 3.4 m jib 1200 (70) 30.5 + 12.6 m jib 2000 (75)
(70'6" + 11'2") (2,650) (100' + 41'4") (4,410)
Single top 1400 8.0 32.0 + 7.4 m jib 2600 (72)
(3,090 19'8") (105' + 24'3") (5,730)
1200 32.0 + 12.6 m jib 1700 (75)
Jib
(2,650) (105' + 41'4") (3,750)
3000
Single top
(6,610)
Boom length m (ft.in) 4.1~21.5 (13'5"~70'6") 7.6~32.0 (24'11"~105')
Jib length m (ft.in) 4.0 m (13'1") 7.4 (24'3")/12.6 (41'4")
Maximum lifting height m (ft.in) 23.0 (75'6")/26.8 (87'11") 35.3 (115'10")/47.7 (156'6")
Boom/jib
Maximum working radius m (ft.in) 20.3 (66'7")/24.3(79'9") 29.0 (95'2")/35.0 (114'10")
Boom/jib
Wire line speed m (ft.in)/ Hi 117 (383'11")/108 (354'4") Hi Lo
Main winch/Aux. winch min Lo 62 (203'5")/57 (187') 130 (426'6")/65 (213'3")
Boom telescoping time sec 59 (4.1 m~21.5 m) 75 (7.6 m~32 m)
Boom hoisting time sec 31 (-13~83) 45 (0~83)
Swing speed RPM 2.3 2.5
10A-6
Specifications ROUGH TERRAIN
CRANES
Model
LW500-1
Item
CRANE PERFORMANCE:
Maximum rated load* kg x m 9.5m boom 50000x3.0
(lb x ft.in) (31'2") (110,250x9'10")
16.4m boom 30000x4.5
(53'10") (66,150x14'9")
23.1m boom 20000x5.0
(75'9") (44,100x16'5")
29.7m boom 12,000x8.0
(97'5") (26,460x26'3")
36.3m boom 11,000x7.0
(119'1") (24,250x23')
43.0m boom 7,000x10.0
(141'1") (15,430x32'10")
7.4m jib 3,500x(74)
(24'3") (7,710)
12.6m jib 2,500x(77)
(41'4") (5,510)
4500
Single top
(9,920)
Boom length m (ft.in) 9.8~43 (32'2"~141'1")
Jib length m (ft.in) 7.4(24'3")/12.6(41'4")
Maximum lifting height
m (ft.in) 43.8 (143'8")/56.6 (185'8")
Boom/jib
Maximum working radius
m (ft.in) 34.0(111'7")/40.0(131'3")
Boom/jib
Wire line speed Hi 130 (426'6")/119 (390'5")
m (ft.in)/min
Main winch/Aux. winch Lo 65 (213'3")/59.5 (195'3")
Boom telescoping time sec 115 (9.8m~43.0m)(32'2"~141'1")
Boom hoisting time sec 60 (0~83)
Swing speed RPM 2.6
* With outriggers fully extended
Item
LW500-1
Model
WIRE ROPE: IWRC 6xFi (29)
de-Twist-ability,
Main 18mm(0'59")x232m(761'2")
MAJOR CRANE MECHANISM: Hexagonal 6-stage box-section type
Main boom type Box structure 2-stage type
Jib type Hydraulic 2 motors drive 2 drums,
Winch With free fall
10A-7
Specifications ROUGH TERRAIN
CRANES
Item
LW100-1 LW250-5 LW500-1
Model
GROSS VEHICLE kg (lb) 12950 (28,550) 26980 (59,480) 37990 (83,760)
WEIGHT *(H)(X)
FLYWHEEL HP (kW)/ 158 (118)/3000 246.5 (184)/2100 350 (261)/2100
RPM
TRAVEL
PERFORMANCE:
Maximum speed km/h (MPH) 55 (34.2) 55 (34.2) 49 (30.4)
Grade-ability (tan ) 0.52 0.6 0.6
Turning radius:
4-wheel steering m (ft.in) 3.95 (13') 5.4 (17'9") 6.1 (20')
2-wheel steering 7.11 (23'4") 9.3 (30'6") 10.6 (34'9")
DIMENSIONS:
Overall length 6235 (20'5") 9940 (32'7") 11940 (39'2")
Overall width 2000 (6'7") 2620 (8'7") 2980 (9'9")
Overall height mm (ft.in) 2800 (9'2") 3520 (11'7") 3660 (12')
Wheelbase 2800 (9'2") 3750 (12'4") 4950 (16'3")
Treads (front and rear) 1680 (5'6") 2190 (7'2") 2400 (7'10")
Tail swing radius 1350 (4'5") 2950 (9'8") 3550 (11'8")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D95LE S6D125E S6D140E
No. of cylinders- mm (in) 6-95 115 6-125 150 6-140x165
bore stroke (3.7 4.5) (4.92 5.91) (5.51x6.50)
Piston displacement ltr. (cu.in) 4.89 (298) 11.04 (674) 15.2 (928)
POWER TRAIN:
Drive method 2-wheel drive/4-wheel 2-wheel drive/4-wheel 2-wheel drive/4-wheel
Transmission type drive drive drive
Electronic control fully Electronic control fully Electronic control fully
Number of speeds:
Forward/reverse 4/2 3/1 (with Hi & Lo) 3/1 (with Hi & Lo)
TIRES:
Front tire 11R22.5-16PR 385/95R25 505/95R25
Rear tire 11R22.5-16PR 385/95R25 505/95R25
CAPACITY:
Fuel tank ltr. (U.S. Gal) 200 (52.8) 300 (79.3) 300 (79.3)
* (X) : X-shaped outrigger
(H) : H-shaped outrigger
10A-8
Dimensions ROUGH TERRAIN
CRANES
B
C J
D E F
G
A
H FVBH0079
A B C D E F G H I J (Max.)
6235 2800 2000 1730 2800 1705 1730 4760* 1350 4750
(20'5") (9'2") (6'7") (5'8") (9'2") (5'7") (5'8") (15'7") (4'5") (15'7")
LW100-1
4780**
(15'8")
9940 3520 2620 1905 3750 2135 4055 6600 2950 6600
LW250-5
(32'7") (11'7") (8'7") (6'3") (12'4") (7') (13'4") (21'8") (9'8") (21'8")
11940 3660 2980 1915 4950 2385 7900 3550 7500
LW500-1
(39'2") (12') (9'9") (6'3") (16'3") (7'10") (25'11") (11'8") (24'7")
* X-shaped outrigger
** H-shaped outrigger
10A-9
Total Rated Loads ROUGH TERRAIN
CRANES
LW100-1
When outriggers are used (Boom working) (unit: ton)
Outrigger maximum extended width 4.75 m (360) Outrigger intermediate extended width 4.10 m (Over side)
Boom Boom
length (m) length (m)
4.1 7.6 11.1 14.5 18.0 21.5 4.1 7.6 11.1 14.5 18.0 21.5
Working Working
radius (m) radius (m)
1.0 10.00 5.00 1.0 10.00 5.00
1.5 10.00 5.00 5.00 1.5 10.00 5.00 5.00
2.0 10.00 5.00 5.00 4.00 2.0 10.00 5.00 5.00 4.00
2.5 10.00 5.00 5.00 4.00 4.00 2.5 9.40 5.00 5.00 4.00 4.00
3.0 8.00 5.00 5.00 4.00 4.00 2.30 3.0 8.00 5.00 5.00 4.00 4.00 2.30
3.5 5.00 5.00 4.00 4.00 2.30 3.5 5.00 5.00 4.00 4.00 2.30
4.0 5.00 5.00 4.00 4.00 2.30 4.0 5.00 5.00 4.00 4.00 2.30
4.5 5.00 4.55 4.00 3.70 2.30 4.5 4.95 4.55 4.00 3.70 2.30
5.0 4.60 4.10 3.70 3.40 2.30 5.0 4.32 4.10 3.70 3.40 2.30
5.5 4.15 3.50 3.40 3.10 2.30 5.5 3.85 3.50 3.40 3.10 2.30
6.0 3.70 3.15 3.15 2.85 2.30 6.0 3.40 3.15 3.15 2.85 2.30
6.5 3.35(6.4m) 2.95 2.90 2.60 2.15 6.5 3.10(6.4m) 2.90 2.90 2.60 2.15
7.0 2.80 2.65 2.40 2.00 7.0 2.49 2.65 2.40 2.00
8.0 2.30 2.25 2.05 1.75 8.0 1.89 2.10 2.05 1.75
9.0 1.90 1.95 1.80 1.55 9.0 1.46 1.67 1.79 1.55
10.0 1.57(9.9m) 1.70 1.60 1.40 10.0 1.16(9.9m) 1.34 1.46 1.40
11.0 1.45 1.40 1.25 11.0 1.08 1.20 1.25
12.0 1.20 1.25 1.15 12.0 0.85 0.99 1.07
13.0 1.05 1.05 1.05 13.0 0.66 0.80 0.90
14.0 0.92(13.4m) 0.90 0.95 14.0 0.60(13.4m) 0.64 0.74
15.0 0.79 0.85 15.0 0.50 0.59
16.0 0.65 0.73 16.0 0.38 0.47
17.0 0.56(16.8m) 0.60 17.0 0.30(16.8m) 0.36
18.0 0.50 18.0 0.27
19.0 0.42 19.0 0.20
20.0 0.35 20.0
21.0 0.33(20.3m) 21.0
Dangerous Dangerous
angle angle 24
Outrigger intermediate extended width 3.40 m (Over side) Outrigger intermediate extended width 2.80 m (Over side)
Boom Boom
length (m) length (m)
4.1 7.6 11.1 14.5 18.0 21.5 4.1 7.6 11.1 14.5 18.0 21.5
Working Working
radius (m) radius (m)
1.0 10.00 5.00 1.0 10.00 5.00
1.5 10.00 5.00 5.00 1.5 10.00 5.00 5.00
2.0 10.00 5.00 5.00 4.00 2.0 9.60 5.00 5.00 4.00
2.5 8.60 5.00 5.00 4.00 4.00 2.5 7.80 5.00 5.00 4.00 4.00
3.0 7.30 5.00 5.00 4.00 4.00 2.30 3.0 6.60 5.00 5.00 4.00 4.00 2.30
3.5 5.00 5.00 4.00 4.00 2.30 3.5 5.00 4.93 4.00 4.00 2.30
4.0 5.00 5.00 4.00 4.00 2.30 4.0 3.90 3.77 4.00 4.00 2.30
4.5 4.40 4.26 4.00 3.70 2.30 4.5 3.10 2.98 3.24 3.39 2.30
5.0 3.57 3.45 3.70 3.40 2.30 5.0 2.52 2.42 2.65 2.80 2.30
5.5 2.96 2.85 3.10 3.10 2.30 5.5 2.09 1.98 2.22 2.35 2.30
6.0 2.50 2.40 2.63 2.76 2.30 6.0 1.75 1.65 1.87 2.00 2.08
6.5 2.20(6.4m) 2.02 2.25 2.39 2.15 6.5 1.53(6.4m) 1.38 1.59 1.72 1.80
7.0 1.73 1.95 2.08 2.00 7.0 1.15 1.36 1.49 1.57
8.0 1.28 1.49 1.61 1.69 8.0 0.75 1.01 1.13 1.21
9.0 0.90 1.15 1.27 1.35 9.0 0.44 0.70 0.85 0.94
10.0 0.65(9.9m) 0.88 1.01 1.09 10.0 0.23(9.9m) 0.46 0.61 0.72
11.0 0.64 0.80 0.89 11.0 0.27 0.42 0.52
12.0 0.45 0.60 0.70 12.0 0.20(11.4m) 0.27 0.36
13.0 0.30 0.44 0.54 13.0 0.20(12.5m) 0.24
14.0 0.24(13.4m) 0.30 0.40 14.0 0.20(13.3m)
15.0 0.20(14.9m) 0.29 15.0
16.0 0.20(15.9m) 16.0
17.0 17.0
18.0 18.0
Dangerous Dangerous
angle 30 41 angle 34 44 51
Please read the "Precautions when using outrigger" section when working at maximum rated load during single top work or when
working at 1-step extension jib (jib length 0.7 m).
10A-10
Total Rated Loads ROUGH TERRAIN
CRANES
LW100-1
When outriggers are used (Boom working ) (Unit : ton)
Outrigger minimum extended width 1.65 m (Over side),
Outrigger intermediate extended width 2.20 m (Over side)
H-shape only
Boom Boom
length (m) length (m)
4.1 7.6 11.1 14.5 18.0 21.5 4.1 7.6 11.1 14.5 18.0 21.5
Working Working
radius (m) radius (m)
1.0 10.00 5.00 1.0 10.00 5.00
1.5 7.90 5.00 5.00 1.5 7.90 5.00 5.00
2.0 6.25 5.00 5.00 4.00 2.0 6.20 5.00 5.00 4.00
2.5 5.00 4.75 4.68 4.00 4.00 2.5 4.20 3.90 3.77 4.00 4.00
3.0 4.10 3.87 3.78 4.00 4.00 2.30 3.0 3.05 2.75 2.65 2.90 3.05 2.30
3.5 3.18 3.09 3.32 3.45 2.30 3.5 2.05 1.95 2.17 2.31 2.30
4.0 2.56 2.45 2.70 2.84 2.30 4.0 1.56 1.46 1.68 1.81 1.90
4.5 2.03 1.93 2.15 2.30 2.30 4.5 1.20 1.10 1.32 1.45 1.53
5.0 1.64 1.54 1.76 1.89 1.97 5.0 0.90 0.77 1.05 1.17 1.25
5.5 1.33 1.23 1.45 1.57 1.66 5.5 0.65 0.52 0.80 0.95 1.03
6.0 1.09 0.97 1.20 1.32 1.40 6.0 0.45 0.32 0.58 0.74 0.85
6.5 0.90(6.4m) 0.73 1.00 1.12 1.20 6.5 0.31(6.4m) 0.20(6.3m) 0.41 0.57 0.67
7.0 0.53 0.80 0.95 1.03 7.0 0.27 0.42 0.53
8.0 0.22 0.48 0.64 0.74 8.0 0.20(7.2m) 0.20(7.9m) 0.29
9.0 0.25 0.40 0.50 9.0 0.20(8.5m)
10.0 0.20(9.2m) 0.22 0.32 10.0
11.0 0.20(10.1m) 0.20(10.8m) 11.0
12.0 12.0
13.0 13.0
14.0 14.0
15.0 15.0
16.0 16.0
17.0 17.0
18.0 18.0
Dangerous Dangerous
angle 39 48 55 59 angle 52 59 63 66
Outrigger maximum extended width 4.75 m (360) Outrigger intermediate extended width 4.10 m (Over side)
Jib Tilt Angle Jib Tilt Angle
Boom angle () Boom angle ()
0 20 40 0 20 40
83.0 1.20 0.89 0.58 83.0 1.20 0.89 0.58
80.0 1.20 0.89 0.58 80.0 1.20 0.89 0.58
75.0 1.20 0.77 0.54 75.0 1.20 0.77 0.54
72.0 1.20 0.72 0.52 72.0 1.20 0.72 0.52
70.0 1.15 0.69 0.51 70.0 1.15 0.69 0.51
65.0 0.95 0.62 0.48 65.0 0.95 0.62 0.48
60.0 0.82 0.57 0.47 60.0 0.82 0.57 0.47
55.0 0.71 0.53 0.45 55.0 0.71 0.53 0.45
50.0 0.64 0.50 0.44 50.0 0.58 0.50 0.44
45.0 0.55 0.48 0.44 45.0 0.43 0.40 0.40
40.0 0.47 0.43 0.43 40.0 0.32 0.30 0.30
35.0 0.40 0.38 35.0 0.23 0.22
30.0 0.35 0.33 30.0
25.0 0.29 0.28 25.0
20.0 0.25 0.24 20.0
15.0 0.22 15.0
10.0 0.20 10.0
Dangerous angle 20 40 Dangerous angle 33 34 40
10A-11
Total Rated Loads ROUGH TERRAIN
CRANES
LW100-1
When outriggers are used (21.5 m Boom + 3.4 m Auxiliary jib working) (Unit : ton)
Outrigger intermediate extended width 3.40 m (Over side) Outrigger intermediate extended width 2.80 m (Over side)
Jib Tilt Angle Jib Tilt Angle
Boom angle () Boom angle ()
0 20 40 0 20 40
83.0 1.20 0.89 0.58 83.0 1.20 0.89 0.58
80.0 1.20 0.89 0.58 80.0 1.20 0.89 0.58
75.0 1.20 0.77 0.54 75.0 1.20 0.77 0.54
72.0 1.20 0.72 0.52 72.0 1.20 0.72 0.52
70.0 1.15 0.69 0.51 70.0 1.04 0.69 0.51
65.0 0.95 0.62 0.48 65.0 0.68 0.60 0.48
60.0 0.70 0.57 0.47 60.0 0.42 0.37 0.35
55.0 0.48 0.43 0.42 55.0 0.23 0.20
50.0 0.31 0.29 0.28 50.0
45.0 45.0
Dangerous Dangerous
46 46 47 54 55 56
angle angle
10A-12
Total Rated Loads ROUGH TERRAIN
CRANES
LW100-1
When outriggers are used
Suspension lock (option) mounted vehicles only (unit : ton)
Hoisling/traveling (Max. speed 2 km/h)
Boom Forward Boom 360
length (m) length (m)
Working 4.1 7.6 11.1 Working 4.1 7.6 11.0
radius (m) radius (m)
1.0 4.90 4.90 1.0 3.40 3.20
1.5 4.25 4.10 4.05 1.5 3.30 3.05 3.00
2.0 3.45 3.30 3.25 2.0 2.40 2.15 2.05
2.5 2.90 2.70 2.65 2.5 1.80 1.55 1.45
3.0 2.45 2.25 2.20 3.0 1.35 1.05 1.00
3.5 1.85 1.80 3.5 0.75 0.65
4.0 1.55 1.50 4.0 0.50 0.40
4.5 1.30 1.25 4.5 0.25 0.20 (4.4 m)
5.0 1.10 1.00 5.0
5.5 0.90 0.85 5.5
6.0 0.75 0.70 6.0
6.5 0.65 (6.4 m) 0.55 6.5
7.0 0.40 7.0
8.0 0.20 (7.8 m) 8.0
Dangerous Dangerous
39 46 64
angle angle
LW250-5
When outriggers are used (Boom working) (unit: ton)
Outrigger maximum extended width 6.6 m (360) Outrigger intermediate extended width 5.9 m (Over side)
Boom Boom
length length
(m) (m)
7.1 13.7 19.8 25.9 30.5 32.0 7.6 13.7 19.8 25.9 30.5 32.0
Working Working
radius radius
(m) (m)
2.5 26.00 21.00 14.50 2.5 26.00 21.00 14.50
3.0 26.00 21.00 14.50 10.60 3.0 26.00 21.00 14.50 10.60
3.5 25.40 21.00 14.50 10.60 7.00 3.5 25.40 21.00 14.50 10.60 7.00
4.0 23.40 20.00 14.50 10.60 7.00 5.90 4.0 23.40 20.00 14.50 10.60 7.00 5.90
4.5 21.40 18.90 14.50 10.60 7.00 5.90 4.5 21.40 18.90 14.50 10.60 7.00 5.90
5.0 18.10 17.60 14.40 10.60 7.00 5.90 5.0 18.10 17.60 14.40 10.60 7.00 5.90
5.5 16.50 13.80 10.60 7.00 5.90 5.5 16.50 13.80 10.60 7.00 5.90
6.0 15.30 13.00 10.40 7.00 5.90 6.0 15.30 13.00 10.40 7.00 5.90
6.5 14.20 12.30 9.80 7.00 5.90 6.5 13.10 12.30 9.80 7.00 5.90
7.0 13.00 11.60 9.25 7.00 5.90 7.0 11.20 11.60 9.25 7.00 5.90
8.0 10.00 10.00 8.25 7.00 5.90 8.0 8.45 9.35 8.25 7.00 5.90
9.0 7.90 8.70 7.45 6.30 5.50 9.0 6.65 7.45 7.45 6.30 5.50
10.0 6.45 7.20 6.75 5.80 5.10 10.0 5.35 6.10 6.50 5.80 5.10
11.0 5.30 6.10 6.05 5.30 4.70 11.0 4.40 5.10 5.50 5.30 4.70
12.0 5.20 5.50 4.90 4.30 12.0 4.30 4.70 4.85 4.35
13.0 4.45 4.70 4.50 4.00 13.0 3.70 4.05 4.20 4.00
14.0 3.80 4.10 4.15 3.65 14.0 3.20 3.50 3.70 3.65
15.0 3.20 3.70 3.80 3.35 15.0 2.75 3.10 3.25 3.30
16.0 2.85 3.25 3.45 3.10 16.0 2.40 2.70 2.85 2.90
17.0 2.50 2.90 3.05 2.90 17.0 2.10 2.40 2.55 2.60
18.0 2.55 2.70 2.70 18.0 2.10 2.25 2.30
19.0 2.55 2.45 2.50 19.0 1.85 2.00 2.05
20.0 2.00 2.20 2.25 20.0 1.65 1.80 1.85
22.0 1.55 1.75 1.80 22.0 1.20 1.40 1.45
24.0 1.40 1.45 24.0 1.00 1.10
26.0 1.15 1.15 26.0 0.75 0.75
28.0 0.95 28.0 0.55
29.0 0.75 29.0
Dangerous angle Dangerous angle 10
10A-13
Total Rated Loads ROUGH TERRAIN
CRANES
LW250-5
When outriggers are not used (Boom working) (unit: ton)
Outrigger intermediate extended width 3.8 m (Over side) Outrigger minimum extended width 2.2 m (Over side), H-Shape
Boom Boom
length (m) length (m)
7.1 13.7 19.8 25.9 30.5 32.0 7.6 13.7 19.8 25.9 30.5 32.0
Working Working
radius (m) radius (m)
2.5 26.00 21.00 14.50 2.5 13.00 12.00 11.00
3.0 26.00 21.00 14.50 10.60 3.0 12.50 11.70 11.00 8.30
3.5 22.50 20.00 14.50 10.60 7.00 3.5 9.55 9.10 9.50 8.30 5.50
4.0 17.50 16.65 14.50 10.60 7.00 5.90 4.0 7.70 7.10 7.50 7.30 5.50 4.30
4.5 13.70 12.95 13.50 10.60 7.00 5.90 4.5 6.25 5.65 6.10 6.30 5.50 4.30
5.0 10.90 10.45 11.10 10.60 7.00 5.90 5.0 5.00 4.60 5.10 5.45 5.50 4.30
5.5 8.65 9.40 9.65 7.00 5.90 5.5 3.80 4.30 4.65 4.75 4.30
6.0 7.30 8.05 8.30 7.00 5.90 6.0 3.15 3.70 4.00 4.15 4.30
6.5 6.20 7.00 7.20 7.00 5.90 6.5 2.60 3.10 3.50 3.65 3.70
7.0 5.35 6.10 6.45 6.60 5.90 7.0 2.15 2.70 3.00 3.20 3.25
8.0 4.05 4.80 5.10 5.30 5.40 8.0 1.30 2.00 2.30 2.50 2.55
9.0 3.15 3.85 4.15 4.35 4.40 9.0 0.70 1.40 1.80 1.95 2.00
10.0 2.45 3.10 3.40 3.60 3.65 10.0 1.00 1.45 1.55 1.60
11.0 1.80 2.50 2.85 3.00 3.05 11.0 0.60 1.05 1.20 1.25
12.0 2.05 2.40 2.55 2.60 12.0 0.70 0.90 0.95
13.0 1.60 2.00 2.15 2.20 13.0
14.0 1.30 1.70 1.80 1.85 14.0
15.0 1.00 1.40 1.50 1.55 15.0
16.0 0.70 1.10 1.25 1.30 16.0
17.0 0.85 1.05 1.10 17.0
18.0 0.65 0.85 0.90 18.0
19.0 0.65 0.70 19.0
20.0 0.55 20.0
22.0 22.0
Dangerous Dangerous
angle 35 42 45 angle 35 50 58 60 61
Outrigger intermediate extended width 5.2 m (Over side) Outrigger intermediate extended width 4.5 m (Over side)
Boom Boom
length (m) length (m)
7.1 13.7 19.8 25.9 30.5 32.0 7.1 13.7 19.8 25.9 30.5 32.0
working working
radius (m) radius (m)
2.5 26.00 21.00 14.50 2.5 28.00 21.00 14.50
3.0 26.00 21.00 14.50 10.60 3.0 26.00 21.00 14.50 10.60
3.5 25.40 21.00 14.50 10.60 7.00 3.5 25.40 21.00 14.50 10.60 7.00
4.0 23.40 20.00 14.50 10.60 7.00 5.90 4.0 22.50 20.00 14.50 10.60 7.70 5.90
4.5 21.40 18.90 14.50 10.60 7.00 5.90 4.5 18.50 17.74 14.50 10.60 7.00 5.90
5.0 17.75 17.60 14.40 10.60 7.00 5.90 5.0 14.50 14.05 14.40 10.60 7.00 5.90
5.5 15.05 13.50 10.60 7.00 5.90 5.5 11.50 12.50 10.60 7.00 5.90
6.0 12.50 12.70 10.40 7.00 5.90 6.0 9.60 10.55 10.40 7.00 5.90
6.5 10.50 11.05 9.80 7.00 5.90 6.5 8.20 9.05 9.55 7.00 5.90
7.0 9.05 10.00 9.25 7.00 5.90 7.0 7.05 7.90 8.36 7.00 5.90
8.0 6.90 7.75 7.80 7.00 5.90 8.0 5.40 6.15 6.60 6.75 5.90
9.0 5.40 6.20 6.50 6.30 5.50 9.0 4.20 4.95 5.35 5.50 5.50
10.0 4.30 5.10 5.50 5.65 5.10 10.0 3.35 4.05 4.40 4.60 4.65
11.0 3.55 4.25 4.60 4.80 4.70 11.0 2.65 3.35 3.70 3.85 3.90
12.0 3.60 3.95 4.15 4.15 12.0 2.80 3.15 3.30 3.35
13.0 3.05 3.35 3.55 3.60 13.0 2.35 2.70 2.85 2.90
14.0 2.60 2.90 3.10 3.15 14.0 1.95 2.30 2.45 2.50
15.0 2.20 2.55 2.70 2.75 15.0 1.60 1.95 2.15 2.15
16.0 1.85 2.20 2.40 2.45 16.0 1.30 1.70 1.85 1.90
17.0 1.55 1.95 2.10 2.15 17.0 1.00 1.40 1.55 1.60
18.0 1.70 1.80 1.85 18.0 1.10 1.30 1.40
19.0 1.45 1.60 1.65 19.0 0.90 1.05 1.15
20.0 1.20 1.40 1.45 20.0 0.70 0.85 0.95
22.0 0.80 1.00 1.05 22.0 0.55 0.65
24.0 0.70 0.75 Dangerous
angle 18 34 36
26.0 0.50
28.0
29.0
Dangerous
angle 18 24
10A-14
Total Rated Loads ROUGH TERRAIN
CRANES
LW250-5
When outriggers are used (32.0 m Boom + Auxiliary jib working) (unit : ton)
Outrigger maximum extended width 6.6 m (360)
Boom Jib length 7.4 m Boom Jib length 12.6 m
angle tilt tilt tilt tilt tilt angle tilt tilt tilt tilt tilt
() 5 15 30 45 60 () 5 15 30 45 60
83.0 2.60 2.20 1.80 1.60 1.00 83.0 1.70 1.40 1.00 0.70 0.50
80.0 2.60 2.20 1.80 1.60 1.00 80.0 1.70 1.40 0.96 0.70 0.50
75.0 2.60 2.20 1.80 1.60 1.00 75.0 1.70 1.32 0.87 0.69 0.50
72.0 2.60 2.20 1.80 1.51 0.88 72.0 1.45 1.10 0.83 0.66 0.48
70.0 2.55 2.15 1.80 1.46 0.86 70.0 1.30 1.02 0.80 0.64 0.47
65.0 2.05 1.76 1.57 1.33 0.81 65.0 1.05 0.87 0.72 0.59 0.43
60.0 1.75 1.50 1.31 1.15 0.78 60.0 0.92 0.78 0.66 0.56 0.40
55.0 1.30 1.20 1.11 0.98 55.0 0.80 0.71 0.63 0.54
50.0 0.97 0.92 0.88 0.81 50.0 0.64 0.58 0.53 0.51
45.0 0.62 0.60 0.58 0.58 45.0 0.45 0.44 0.43 0.42
40.0 0.37 0.37 0.37 42.5 0.35 0.38 0.37
Dangerous Dangerous
angle 38 38 38 43 58 angle 41 41 41 43 58
10A-15
Total Rated Loads ROUGH TERRAIN
CRANES
LW250-5
When outriggers are used (32.0 m Boom + Auxiliary jib working) (unit : ton)
Outrigger minimum extended width 3.8 m (Over side)
Boom Jib length 7.4 m Boom Jib length 12.6 m
angle tilt tilt tilt tilt tilt angle tilt tilt tilt tilt tilt
() 5 15 30 45 60 () 5 15 30 45 60
83.0 2.60 2.20 1.80 1.60 1.00 83.0 1.70 1.40 1.00 0.70 0.50
80.0 2.60 2.20 1.80 1.60 1.00 80.0 1.70 1.40 0.96 0.70 0.50
75.0 2.60 2.20 1.80 1.60 1.00 75.0 1.70 1.32 0.87 0.69 0.50
72.0 2.15 1.95 1.69 1.51 0.88 72.0 1.45 1.10 0.83 0.66 0.48
70.0 1.73 1.60 1.45 1.35 0.86 70.0 1.30 1.02 0.80 0.64 0.47
65.0 0.90 0.84 0.76 0.70 0.69 65.0 0.58 0.58 0.50 0.45
62.0 0.50 0.50 0.46 0.44
Dangerous Dangerous
60 60 60 60 63 63 63 63 63 68
angle angle
10A-16
Total Rated Loads ROUGH TERRAIN
CRANES
LW500-1
When outriggers not are used (unit : ton)
Outrigger maximum extended width Outrigger maximum extended width
7.5m (360),H-shape 6.8m (Over side),H-shape
Boom Boom
length length
9.8 16.4 23.1 29.7 36.3 39.6 43.0 9.8 16.4 23.1 29.7 36.3 39.6 43.0
Working Working
radius(m) radius(m)
2.5 50.00 30.00 20.00 12.00 2.5 50.00 30.00 20.00 12.00
3.0 50.00 30.00 20.00 12.00 3.0 48.50 30.00 20.00 12.00
3.5 44.50 30.00 20.00 12.00 11.00 3.5 43.00 30.00 20.00 12.00 11.00
4.0 39.50 30.00 20.00 12.00 11.00 8.50 4.0 38.00 30.00 20.00 12.00 11.00 8.50
4.5 35.50 30.00 20.00 12.00 11.00 8.50 7.00 4.5 34.10 30.00 20.00 12.00 11.00 8.50 7.00
5.0 32.00 29.00 20.00 12.00 11.00 8.50 7.00 5.0 30.70 28.60 20.00 12.00 11.00 8.50 7.00
5.5 29.00 27.00 19.80 12.00 11.00 8.50 7.00 5.5 27.70 26.00 19.80 12.00 11.00 8.50 7.00
6.0 26.50 24.60 18.70 12.00 11.00 8.50 7.00 6.0 25.30 23.70 18.70 12.00 11.00 8.50 7.00
6.5 24.00 22.70 17.60 12.00 11.00 8.50 7.00 6.5 23.00 21.60 17.60 12.00 11.00 8.50 7.00
7.0 20.90 16.70 12.00 11.00 8.50 7.00 7.0 19.80 16.70 12.00 11.00 8.50 7.00
8.0 17.80 15.00 12.00 10.10 8.50 7.00 8.0 16.40 15.00 12.00 10.10 8.50 7.00
9.0 15.00 13.40 11.50 9.40 8.50 7.00 9.0 12.80 12.60 11.50 9.40 8.50 7.00
10.0 12.39 11.90 10.50 8.70 7.90 7.00 10.0 10.30 10.10 10.50 8.70 7.90 7.00
11.0 10.17 9.98 9.60 8.10 7.35 6.50 11.0 8.50 8.30 9.30 8.10 7.35 6.50
12.0 8.50 8.31 8.80 7.50 6.85 6.00 12.0 7.07 6.90 7.80 7.50 6.85 6.00
13.0 7.18 7.00 7.80 7.00 6.40 5.60 13.0 5.95 5.78 6.70 7.00 6.40 5.60
14.0 5.94 6.92 6.50 6.00 5.30 14.0 4.86 5.75 6.26 6.00 5.30
16.0 4.33 5.25 5.67 5.30 4.70 16.0 3.47 4.30 4.78 4.95 4.70
18.0 3.18 4.06 4.45 4.53 4.25 18.0 2.45 3.25 3.71 3.87 4.00
20.0 2.20 3.14 3.53 3.69 3.90 20.0 1.45 2.46 2.90 3.05 3.18
22.0 2.42 2.81 2.97 3.10 22.0 1.78 2.26 2.41 2.54
24.0 1.72 2.23 2.38 2.50 24.0 1.15 1.75 1.90 2.00
26.0 1.13 1.76 1.91 2.03 26.0 0.63 1.26 1.48 1.60
28.0 1.29 1.52 1.63 28.0 0.82 1.05 1.24
30.0 0.87 1.10 1.29 30.0 0.67 0.86
32.0 0.74 0.93 32.0 0.54
34.0 0.62 Dangerous 27 32 35
Dangerous angle
10 21 28
angle
10A-17
Total Rated Loads ROUGH TERRAIN
CRANES
LW500-1
When outriggers not are used (unit : ton)
Outrigger maximum extended width Outrigger maximum extended width
5.6m (Over side),H-shape 4.1m (Over side),H-shape
Boom Boom
length length
9.8 16.4 23.1 29.7 36.3 39.6 43.0 9.8 16.4 23.1 29.7 36.3 39.6 43.0
Working Working
radius(m) radius(m)
2.5 45.00 30.00 20.00 12.00 2.5 40.00 30.00 20.00 12.00
3.0 45.00 30.00 20.00 12.00 3.0 40.00 30.00 20.00 12.00
3.5 40.00 30.00 20.00 12.00 11.00 3.5 34.30 30.00 20.00 12.00 11.00
4.0 35.50 30.00 20.00 12.00 11.00 8.50 4.0 28.80 28.00 20.00 12.00 11.00 8.50
4.5 31.80 29.10 20.00 12.00 11.00 8.50 7.00 4.5 22.20 21.80 20.00 12.00 11.00 8.50 7.00
5.0 28.60 26.20 20.00 12.00 11.00 8.50 7.00 5.0 17.80 17.50 17.30 12.00 11.00 8.50 7.00
5.5 25.90 23.70 19.80 12.00 11.00 8.50 7.00 5.5 14.70 14.40 14.20 12.00 11.00 8.50 7.00
6.0 21.40 21.00 18.70 12.00 11.00 8.50 7.00 6.0 12.40 12.10 11.90 12.00 11.00 8.50 7.00
6.5 18.10 17.70 17.40 12.00 11.00 8.50 7.00 6.5 10.60 10.30 10.10 11.30 11.00 8.50 7.00
7.0 15.10 14.90 12.00 11.00 8.50 7.00 7.0 8.92 8.70 9.80 10.20 8.50 7.00
8.0 11.50 11.30 12.00 10.10 8.50 7.00 8.0 6.77 6.60 7.60 8.10 8.30 7.00
9.0 9.00 8.90 9.90 9.40 8.50 7.00 9.0 5.23 5.11 6.06 6.50 6.70 6.90
10.0 7.29 7.10 8.10 8.67 7.90 7.00 10.0 4.09 3.96 4.86 5.37 5.55 5.70
11.0 5.93 5.79 6.70 7.25 7.35 6.50 11.0 3.20 3.07 3.94 4.42 4.60 4.75
12.0 4.87 4.73 5.63 6.14 6.30 6.00 12.0 2.50 2.36 3.20 3.67 3.84 3.98
13.0 4.04 3.87 4.74 5.24 5.41 5.56 13.0 1.79 1.70 2.60 3.05 3.22 3.36
14.0 3.17 4.02 4.49 4.67 4.81 14.0 1.10 2.09 2.54 2.70 2.84
16.0 2.05 2.90 3.35 3.51 3.65 16.0 1.18 1.74 1.89 2.02
18.0 1.05 2.07 2.51 2.67 2.80 18.0 1.07 1.29 1.41
20.0 1.31 1.87 2.02 2.14 20.0 0.72 0.91
22.0 0.69 1.32 1.51 1.63 Dangerous 42 47 53 55 57
24.0 0.80 1.03 1.21 angle
26.0 0.60 0.80
Dangerous 20 32 41 43 46
angle
10A-18
Total Rated Loads ROUGH TERRAIN
CRANES
LW500-1
When outriggers not are used (Auxiliary jib working)
Outrigger maximum extended width 7.5m (360),H-shape
Boom length 7.4m Boom length:12.6m
Boom Boom
angle tilt 5 tilt 25 tilt 45 tilt 60 angle tilt 5 tilt 25 tilt 45 tilt 60
() Working Load Working Load Working Load Working Load () Working Load Working Load Working Load Working Load
radiius(m) (ton) radiius(m) (ton) radiius(m) (ton) radiius(m) (ton) radiius(m) (ton) radiius(m) (ton) radiius(m) (ton) radiius(m) (ton)
83 5.3 3.50 7.4 2.40 8.9 1.60 9.5 1.00 83 6.6 2.50 10.6 1.40 13.3 0.90 14.3 0.50
77 10.9 3.50 12.6 2.40 14.0 1.60 14.2 1.00 77 13.1 2.50 17.2 1.40 19.2 0.90 19.4 0.50
74 13.5 3.50 15.2 2.40 16.5 1.57 16.5 0.95 74 16.1 2.23 20.3 1.40 22.0 0.87 21.8 0.49
72 15.3 3.25 16.9 2.25 18.2 1.54 18.1 0.88 72 18.1 2.02 22.2 1.31 23.7 0.85 23.4 0.48
70 17.0 2.95 18.6 2.10 19.7 1.51 19.6 0.86 70 20.0 1.87 24.1 1.25 25.4 0.83 24.9 0.47
68 18.7 2.65 20.2 1.98 21.3 1.48 21.1 0.84 68 21.8 1.72 25.9 1.19 27.1 0.81 26.4 0.45
65 21.2 2.25 22.6 1.83 23.5 1.43 23.2 0.81 65 24.4 1.54 28.5 1.09 29.5 0.79 28.5 0.43
60 25.1 1.85 26.5 1.57 27.1 1.35 26.7 0.78 60 28.6 1.30 30.9 1.00 33.2 0.76 31.9 0.40
55 28.6 1.35 29.9 1.29 30.3 1.15 55 32.4 1.10 34.6 0.88 35.5 0.74
50 31.8 0.80 33.1 0.75 33.2 0.75 50 35.9 0.69 37.9 0.55 38.5 0.52
48 33.0 0.50 34.2 0.50 34.3 0.50 48 37.2 0.48 39.1 0.45 40.0 0.44
Dangerous Dangerous
47 47 47 59 47 47 47 59
angle angle
10A-19
Total Rated Loads ROUGH TERRAIN
CRANES
LW500-1
When outriggers not are used (Boom working)
Hoisting Hoisting
Boom Forward Boom 360 Boom Forward Boom 360
length length length length
Working 9.8 16.4 23.1 Working 9.8 16.4 23.1 Working 9.8 16.4 23.1 Working 9.8 16.4 23.1
radius(m) radius(m) radius(m) radius(m)
3.0 20.00 15.00 3.0 12.50 10.00 3.0 14.50 10.50 3.0 8.00 6.50
3.5 20.00 15.00 3.5 12.50 10.00 3.5 14.50 10.50 3.5 8.00 6.50
4.0 20.00 15.00 11.00 4.0 11.00 10.00 5.50 4.0 14.50 10.50 8.00 4.0 8.00 6.50 4.50
4.5 18.00 15.00 11.00 4.5 9.10 8.50 5.50 4.5 12.90 10.50 8.00 4.5 6.80 6.50 4.50
5.0 16.00 15.00 11.00 5.0 7.45 7.00 5.50 5.0 11.50 10.50 8.00 5.0 5.80 5.40 4.50
5.5 14.30 14.00 11.00 5.5 6.20 5.75 5.30 5.5 10.30 10.50 8.00 5.5 4.80 4.45 4.25
6.0 12.80 13.00 11.00 6.0 5.20 4.80 4.40 6.0 9.30 10.00 8.00 6.0 4.00 3.70 3.55
6.5 11.70 12.00 10.50 6.5 4.35 4.05 3.65 6.5 8.60 9.30 8.00 6.5 3.35 3.15 3.05
7.0 11.00 9.60 7.0 3.40 3.05 7.0 8.50 7.50 7.0 2.70 2.55
8.0 9.00 8.10 8.0 2.30 2.10 8.0 7.00 6.80 8.0 1.85 1.65
9.0 7.40 6.80 9.0 1.55 1.40 9.0 5.90 5.80 9.0 1.10 0.95
10.0 6.15 5.70 10.0 0.85 0.75 10.0 4.90 4.70 10.0
11.0 5.05 4.75 11.0 11.0 4.00 3.80 11.0
12.0 4.15 3.90 12.0 12.0 3.30 3.10 12.0
13.0 3.45 3.20 13.0 13.0 2.80 2.60 13.0
14.0 2.65 14.0 14.0 2.20 14.0
16.0 1.75 16.0 16.0 1.50 16.0
18.0 1.00 18.0 18.0 0.85 18.0
Dangerous Dangerous Dangerous Dangerous
27 60 60 27 45 61
angle angle angle angle
10A-20
Working Radius vs. ROUGH TERRAIN
Lifting Height CRANES
LW100-1
40
20
29
21.5m Boom+4.0m Jib
70
21.5m Boom+0.7m Jib 83
60
25
21.5m Boom
50
18.0m Boom
40
20
20
7.6m Boom
10
4.1m Boom 10
0
0 5 10 15 20 25
Working radius (m) FVBH0087
LW250-5
50
45
12.6m
5
25
7.4m
45 40
32.0m Boom 35
83
Lifting height (m)
25.9m Boom 70
30
60
55
50
45 25
19.8m Boom
40
35
20
30
13.7m Boom
20 15
7.6m Boom
10 10
0
0 5 10 15 20 25 30 35
Working radius (m)
FVBH0088
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10A-21
Working Radius vs. ROUGH TERRAIN
Lifting Height CRANES
LW500-1
60
5
Jib
25 55
12.6m
45
Jib
60
7.4m
50
43.0m Boom 45
39.6m Boom
36.3m Boom 40
83
77 72
16.4m Boom 35
30 20
25
9.8m Boom 15
20
15
10
10
5
0
0
0 5 10 15 20 25 30 35
Working radius (m) FVBH0089
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10A-22
SECTION 10B
REACH TOWER CRANES
CONTENTS
Features .................................................................. 10B-2
Specifications ......................................................... 10B-3
Dimensions ............................................................. 10B-4
Total Rated Loads:
LT300-2 ............................................................... 10B-5
LT500-1 ............................................................. 10B-20
Working Radius vs. Lifting Height
LT300-2 ............................................................. 10B-22
LT500-1 ............................................................. 10B-24
10B-1
Features REACH TOWER CRANES
! Superior workability
Compact yet providing powerful lifting capacity.
Komatsu reach-tower cranes feature an innovative combination of a 4-stage main boom and a 6-stage
horizontal telescopic boom. Their rated total load is 420 kg, at the working radius of 18 m, providing users
with a wide working range. In addition, the maximum lift above the ground is 29.6 m, making these ma-
chines very effective when used for work in high places. (LT300)
Powerful lifting capacity.
An innovative combination of a 3-stage main boom and a 4-stage horizontal telescopic has been used.
Since the rated total load is 1.6tons at the working radius of 25 m, a working range wider than that of a 50-
ton crane is available. The maximum lift above the ground is 47 m, so these machines are very effective
and well-suited for work in high places. (LT500)
Excellent horizontal reach between swing center and load center.
Loads can be carried forward and backward horizontally.
An excellent horizontal reach is available thanks to the Komatsu engineered combination of the main
boom and horizontal telescopic boom. The horizontal boom is extracted and retracted hydraulically, and
can be used to move a load forward and backward horizontally, unlike the common jib.
(Other features are same as LW100 and LW250.)
10B-2
Specifications REACH TOWER CRANES
10B-3
Dimensions REACH TOWER CRANES
C H
D E F
A
FVPM0215
Unit: mm (ft.in)
A B C D E F G H (Max.) I
LT300-2 7165 2830 2000 1730 2800 1705 4780 4750 1430
(23'6") (9'3") (6'7") (5'8") (9'2") (5'7") (15'8") (15'7") (4'8")
LT500-1 11330 3685 2620 1680 3500 2300 6400 6300 3030
(37'2") (12'1") (8'7") (5'6") (11'6") (7'7") (21") (20'8") (9'11")
10B-4
Total Rated Loads REACH TOWER CRANES
LT300-2
Main hook working Unit: ton
Outrigger maximum extended width 4.75 m (Working radius Main boom angle)
Working Main boom length 5.0 m Main boom length 8.3 m Main boom length 11.6 m Main boom length 14.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 13 30 60 75 13 30 60 75 13 30 60 75 13 30 60 75
2.0 4.90
2.5 4.51 4.34 4.90
3.0 4.01 3.97 4.67 4.21 4.46
3.5 3.61 3.64 3.15 4.20 3.79 4.07 3.98 4.07
4.0 3.27 3.36 2.98 2.95 3.78 3.44 3.16 3.06 3.72 3.61 3.72 3.20
4.5 2.99 3.10 2.84 2.92 3.42 3.14 3.04 2.99 3.40 3.29 3.15 3.05 3.40 2.97
5.0 2.75 2.86 2.73 (4.1) 3.11 2.89 2.83 2.83 3.11 3.00 2.93 2.91 3.11 2.77 2.41 2.37
5.5 2.54 2.66 2.69 2.84 2.66 2.62 (4.9) 2.84 2.74 2.69 2.68 2.84 2.58 2.28 2.25
6.0 2.36 2.47 (5.2) 2.61 2.47 2.44 2.61 2.52 2.47 2.56 2.61 2.42 2.16 2.14
7.0 2.08 2.19 2.13 2.13 2.17 1.71 2.13 2.13 (5.7) 2.13 2.13 1.94 1.99
8.0 2.06 (6.8) 1.71 1.71 (6.8) 1.29 1.71 1.71 1.71 1.71 1.71 (6.6)
9.0 (7.1) 1.29 1.29 0.94 1.29 1.50 1.29 1.29 1.29
10.0 0.94 1.05 0.74 0.94 (8.5) 0.94 0.94 0.94
11.0 0.90 (9.6) 0.60 0.74 0.74 0.74
12.0 (10.2) 0.46 0.60 0.60 0.60
13.0 0.41 0.53 0.46 0.46
14.0 (13.4) (12.5) 0.34 0.34
Dangerous
angle
8 15 41 55 33 33 46 60
10B-5
Total Rated Loads REACH TOWER CRANES
LT300-2
Main hook working Unit: ton
Outrigger extended width 3.40 m (Working radius Main boom angle)
Working Main boom length 5.0 m Main boom length 8.3 m Main boom length 11.6 m Main boom length 14.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 13 30 60 75 13 30 60 75 13 30 60 75 13 30 60 75
2.0 4.90
2.5 4.51 4.34 4.90
3.0 4.01 3.97 4.67 4.21 4.46
3.5 3.61 3.64 3.15 4.20 3.79 4.07 3.98 4.07
4.0 3.27 3.36 2.98 2.95 3.78 3.44 3.16 3.06 3.72 3.61 3.72 3.20
4.5 2.99 3.10 2.84 2.92 3.42 3.14 3.04 2.99 3.40 3.29 3.15 3.05 3.40 2.97
5.0 2.75 2.86 2.73 (4.1) 3.11 2.89 2.83 2.83 3.11 3.00 2.93 2.91 3.11 2.77 2.41 2.37
5.5 2.54 2.66 2.69 2.84 2.66 2.62 (4.9) 2.84 2.74 2.69 2.68 2.84 2.58 2.28 2.25
6.0 2.36 2.47 (5.2) 2.61 2.47 2.44 2.51 2.52 2.47 2.56 2.54 2.42 2.16 2.14
7.0 2.08 2.19 2.13 1.96 2.15 1.81 1.88 1.99 (5.7) 1.85 1.92 1.94 1.99
8.0 2.01 (6.8) 1.71 1.45 (6.8) 1.32 1.38 1.45 1.36 1.42 1.51 (6.6)
9.0 (7.1) 1.06 1.07 0.97 1.01 1.24 1.01 1.06 1.12
10.0 0.77 0.89 0.66 0.70 (8.5) 0.72 0.78 0.83
11.0 0.71 (9.6) 0.38 0.41 0.45 0.49
12.0 (10.2)
Dangerous 13 19 36 46 16 24 41 51 36 37 46 56 49 49 50 61
angle
Working Main boom length 5.0 m Main boom length 8.3 m Main boom length 11.6 m Main boom length 14.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 13 30 60 75 13 30 60 75 13 30 60 75 13 30 60 75
2.0 4.90
2.5 4.51 4.34 3.15 4.90
3.0 4.01 3.97 2.98 2.95 4.67 4.21 4.46
3.5 3.61 3.64 2.84 2.92 4.20 3.79 3.16 3.06 4.07 3.98 4.07
4.0 3.27 3.36 2.73 (4.1) 3.78 3.44 3.04 2.99 3.72 3.61 3.72 3.20
4.5 2.99 3.10 2.69 3.27 3.14 2.83 2.83 3.17 3.29 3.15 3.05 3.21 2.97
5.0 2.75 2.86 (5.2) 2.66 2.77 2.41 (4.9) 2.56 2.69 2.90 2.91 2.60 2.72 2.41 2.37
5.5 2.38 2.43 2.20 2.28 2.01 2.10 2.21 2.38 2.40 2.14 2.24 2.28 2.25
6.0 2.01 2.04 1.83 1.90 1.51 1.74 1.83 1.97 2.22 1.77 1.87 2.02 2.04
7.0 1.46 1.56 1.30 1.35 (6.8) 1.21 1.28 1.38 5.7 1.24 1.32 1.43 1.65
8.0 1.41 (6.8) 0.92 0.96 0.84 0.89 0.95 0.87 0.93 1.02 (6.6)
9.0 (7.1) 0.60 0.62 0.48 0.54 0.78 0.54 0.66 0.68
10.0 (8.5)
11.0
12.0
Dangerous 13 19 39 46 22 24 44 51 48 49 49 56 57 58 58 61
angle
Working Main boom length 5.0 m Main boom length 8.3 m Main boom length 11.6 m Main boom length 14.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 13 30 60 75 13 30 60 75 13 30 60 75 13 30 60 75
2.0 4.90
2.5 4.51 4.34 4.90
3.0 4.01 3.97 4.46 4.21 4.46
3.5 3.61 3.64 3.15 3.53 3.71 3.43 3.63 3.46
4.0 2.90 3.00 2.98 2.95 2.72 2.87 3.12 3.06 2.63 2.79 2.66 2.83
4.5 2.33 2.41 2.53 2.92 2.15 2.27 2.47 2.50 2.06 2.20 2.44 2.48 2.09 2.23
5.0 1.90 1.96 2.04 (4.1m) 1.73 1.83 1.99 2.09 1.64 1.76 1.95 1.99 1.67 1.79 1.99 2.03
5.5 1.57 1.62 1.88 1.40 1.49 1.61 (4.9m) 1.46 1.41 1.58 1.60 1.35 1.45 1.62 1.65
6.0 1.31 1.34 (5.2m) 1.14 1.21 1.31 1.05 1.14 1.28 1.47 1.09 1.18 1.32 1.34
7.0 0.91 0.98 0.74 0.80 0.93 0.62 0.71 0.83 (5.7m) 0.67 0.77 0.88 1.05
8.0 0.87 (6.8m) 0.38 0.42 (6.8m) 0.33 0.41 0.39 0.50 6.60
9.0 (7.1m)
Dangerous 13 19 40 50 41 42 46 55 58 59 60 60 64 65 66 66
angle
10B-6
Total Rated Loads REACH TOWER CRANES
LT300-2
Main hook working Unit: ton
Outrigger minimum extended width 1.65 m (Working radius Main boom angle)
Working Main boom length 5.0 m Main boom length 8.3 m Main boom length 11.6 m Main boom length 14.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 13 30 60 75 13 30 60 75 13 30 60 75 13 30 60 75
2.0 4.90
2.5 4.36 4.34 4.19
3.0 3.13 3.29 2.96 3.17 2.87
3.5 2.36 2.48 2.70 2.20 2.36 2.11 2.29 2.14
4.0 1.84 1.93 2.09 2.11 1.67 1.80 2.03 2.08 1.58 1.73 1.61 1.77
4.5 1.45 1.52 1.64 2.01 1.29 1.40 1.58 1.61 1.20 1.33 1.55 1.60 1.23 1.36
5.0 1.16 1.21 1.29 (4.1) 1.00 1.09 1.24 1.32 0.91 1.02 1.20 1.24 0.94 1.05 1.24 1.28
5.5 0.93 0.97 1.17 0.77 0.84 0.96 (4.9) 0.64 0.78 0.93 0.95 0.69 0.81 0.97 1.00
6.0 0.74 0.77 (5.2) 0.53 0.62 0.74 0.40 0.52 0.70 0.85 0.45 0.56 0.75 0.77
7.0 (5.7) 0.50
8.0 (6.6)
Dangerous 27 32 45 58 55 56 57 63 66 67 68 68 71 71 72 72
angle
10B-7
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 14.9 m/Max. outrigger extended width 4.10 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
4.5 1.40
5.0 1.40
5.5 1.40 1.40
6.0 1.40 1.40 1.40
7.0 1.40 1.40 1.14 1.40 1.40 1.40
8.0 (6.7) 1.31 1.14 0.75 1.40 1.40 0.94 1.40
9.0 1.19 1.10 0.75 0.65 (7.7) 1.22 0.94 0.75 1.40 1.30
10.0 (8.9) 0.97 0.75 0.65 0.65 1.11 0.94 0.75 0.65 (8.6) 1.13 0.90 1.25
11.0 0.87 0.75 0.65 0.65 (9.9) 0.94 0.75 0.65 1.03 0.90 0.65 1.08
12.0 0.75 0.65 0.65 0.90 0.75 0.65 0.55 (10.9) 0.85 0.65 0.55 (10.9) 0.93
13.0 0.75 0.65 0.65 0.89 0.75 0.65 0.55 0.76 0.65 0.55 0.81 0.63
14.0 0.75 0.65 0.65 (12.1) 0.75 0.65 0.55 0.75 0.65 0.55 0.45 0.79 0.63
15.0 (13.3) 0.65 0.64 0.75 0.65 0.55 (13.1) 0.65 0.55 0.45 (13.2) 0.63 0.48
16.0 0.65 0.58 (14.3) 0.65 0.55 0.65 0.55 0.45 0.62 0.48 0.37
17.0 (15.4) 0.53 0.65 0.54 (15.2) 0.55 0.45 (15.4) 0.48 0.37
18.0 0.50 (16.4) 0.50 0.55 0.45 0.48 0.37 0.30
19.0 (17.6) 0.47 (17.4) 0.45 (17.6) 0.37 0.30
20.0 (18.6) 0.44 0.37 0.30
21.0 (19.6) (19.2) 0.30
22.0 0.30
(21.9)
10B-8
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 14.9 m/Max. outrigger extended width 2.80 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
4.5 1.40
5.0 1.40
5.5 1.40 1.40
6.0 1.40 1.40 1.40
7.0 1.40 1.40 1.14 1.40 1.40 1.29
8.0 (6.7) 1.31 1.14 0.75 1.26 1.19 0.94 1.04
9.0 1.15 1.10 0.75 0.65 (7.7) 0.99 0.94 0.75 0.92 0.86
10.0 (8.9) 0.97 0.75 0.65 0.65 0.85 0.85 0.75 0.65 (8.6) 0.72 0.73
11.0 0.84 0.75 0.65 0.65 (9.9) 0.73 0.75 0.65 0.61 0.62 0.65
12.0 0.75 0.65 0.65 0.63 0.67 0.65 0.55 (10.9) 0.53 0.56 0.55
13.0 0.68 0.65 0.65 0.59 0.61 0.55 0.49 0.51
14.0 0.60 0.63 0.65 0.52 0.54 0.55 0.40 0.45 0.45
15.0 (13.3) 0.57 0.59 0.50 0.49 0.50 0.36 0.39 0.41
16.0 0.54 0.53 (14.3) 0.43 0.45 0.34 0.34 0.36
17.0 (15.4) 0.48 0.42 0.41 (15.2) 0.29 0.32
18.0 0.46 (16.4) 0.37 0.27 0.28
19.0 (17.6) 0.35 (17.4)
20.0 (18.6)
10B-9
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 14.9 m/Max. outrigger minimum extended width 1.65 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
4.5 1.27
5.0 1.08
5.5 0.93 0.93
6.0 0.81 0.80 0.58
7.0 0.67 0.62 0.63 0.40 0.39
8.0 (6.7) 0.47 0.50 0.53 0.29 0.26
9.0 0.36 0.38 0.43 0.46 (7.7)
10.0 (8.9) 0.28 0.33 0.37 0.39
11.0 0.26 0.29 0.32
12.0 0.26
10B-10
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 8.3 m/Max. outrigger extended width 4.10 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
3.5 1.40
4.0 1.40 1.40
4.5 1.40 1.40 1.40
5.0 1.40 1.40 1.40 1.40
5.5 1.40 1.40 1.14 1.40 1.40 1.40
6.0 (5.3) 1.40 1.14 0.75 1.40 1.40 1.40 1.35
7.0 1.40 1.14 0.75 0.65 (5.8) 1.40 0.94 1.40 1.35 1.40
8.0 1.40 1.14 0.75 0.65 0.65 1.40 0.94 0.75 (6.4) 1.35 0.90 1.40
9.0 (7.5) 1.14 0.75 0.65 0.65 1.40 0.94 0.75 0.65 1.35 0.90 0.65 (7.6) 1.00 1.40
10.0 1.12 0.75 0.65 0.65 (8.1) 0.94 0.75 0.65 0.55 (8.6) 0.90 0.65 0.55 1.00 0.63 (8.7) 0.82
11.0 (9.7) 0.75 0.65 0.65 0.94 0.75 0.65 0.55 0.90 0.65 0.55 0.45 (9.9) 0.63 0.48 0.82
12.0 0.75 0.65 0.65 (10.3) 0.75 0.65 0.55 (10.8) 0.65 0.55 0.45 0.63 0.48 0.48
13.0 (11.9) 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 0.63 0.48 0.37 0.48
14.0 0.65 0.65 (12.5) 0.65 0.55 0.55 0.45 (12.1) 0.48 0.37 0.30 0.48 0.36
15.0 0.65 0.65 0.65 0.55 0.55 0.45 0.48 0.37 0.30 (13.2) 0.36
16.0 (14.1) 0.62 (14.6) 0.55 0.55 0.45 (14.3) 0.37 0.30 0.36
17.0 0.61 0.55 (15.2) 0.45 0.37 0.30 (15.4)
10B-11
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 11.6 m/Max. outrigger extended width 4.75 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
3.5 1.40
4.0 1.40
4.5 1.40
5.0 1.40 1.40 1.40
5.5 1.40 1.40 1.40
6.0 1.40 1.40 1.14 1.40 1.40 1.40
7.0 1.40 1.14 0.75 1.40 1.40 0.94 1.40
8.0 1.40 1.14 0.75 0.65 (6.7) 1.40 0.94 1.40 1.35
9.0 1.40 1.14 0.75 0.65 0.65 1.40 0.94 0.75 (7.5) 1.35 0.90 1.40
10.0 (8.2) 1.14 0.75 0.65 0.65 0.94 0.75 0.65 1.35 0.90 0.65 1.40 1.00
11.0 1.12 0.75 0.65 0.65 0.94 0.75 0.65 0.55 (9.8) 0.90 0.65 0.55 (9.3) 1.00 1.19
12.0 (10.4) 0.75 0.65 0.65 0.94 0.75 0.65 0.55 0.90 0.65 0.55 0.45 1.00 0.63 (10.9) 0.78
13.0 0.75 0.65 0.65 (11.2) 0.75 0.65 0.55 0.65 0.55 0.45 (11.5) 0.63 0.48 0.78
14.0 (12.6) 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 0.63 0.48 0.78 0.48
15.0 0.65 0.65 (13.4) 0.65 0.55 0.65 0.55 0.45 (13.7) 0.48 0.37 (13.1) 0.48
16.0 (14.8) 0.65 0.65 0.55 (14.1) 0.55 0.45 0.48 0.37 0.30 0.48 0.36
17.0 0.61 (15.5) 0.55 0.55 0.45 (15.9) 0.37 0.30 (15.3) 0.36
18.0 (16.9) 0.55 (16.3) 0.45 0.37 0.30 0.36
19.0 (17.7) 0.45 0.37 0.30 (17.5)
10B-12
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 11.6 m/Max. outrigger extended width 3.40 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
3.5 1.40
4.0 1.40
4.5 1.40
5.0 1.40 1.40 1.40
5.5 1.40 1.40 1.40
6.0 1.40 1.40 1.14 1.40 1.40 1.40
7.0 1.40 1.14 0.75 1.40 1.40 0.94 1.40
8.0 1.40 1.14 0.75 0.65 (6.7) 1.40 0.94 1.40 1.35
9.0 1.40 1.14 0.75 0.65 0.65 1.40 0.94 0.75 (7.5) 1.35 0.90 1.12
10.0 (8.2) 1.14 0.75 0.65 0.65 0.94 0.75 0.65 1.22 0.90 0.65 1.06 0.95
11.0 1.12 0.75 0.65 0.65 0.94 0.75 0.65 0.55 (9.8) 0.90 0.65 0.55 (9.3) 0.81 0.59
12.0 (10.4) 0.75 0.65 0.65 0.94 0.75 0.65 0.55 0.90 0.65 0.55 0.45 0.75 0.63 (10.9) 0.47
13.0 0.75 0.65 0.65 (11.2) 0.75 0.65 0.55 0.65 0.55 0.45 (11.5) 0.62 0.48 0.38
14.0 (12.6) 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 0.56 0.48 0.37 0.32
15.0 0.65 0.65 (13.4) 0.65 0.55 0.65 0.55 0.45 (13.7) 0.48 0.37 (13.1) 0.26
16.0 (14.8) 0.65 0.65 0.55 (14.1) 0.55 0.45 0.45 0.37 0.30 0.24
17.0 0.61 (15.5) 0.55 0.55 0.45 (15.9) 0.37 0.30 (15.3)
10B-13
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 11.6 m/Max. outrigger extended width 2.20 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
3.5 1.40
4.0 1.40
4.5 1.40
5.0 1.40 1.40 1.40
5.5 1.40 1.40 1.40
6.0 1.40 1.40 1.14 1.31 1.31 1.13
7.0 1.18 1.14 0.75 1.10 1.03 0.94 0.89
8.0 0.96 0.98 0.75 0.65 (6.7) 0.83 0.85 0.79 0.71
9.0 0.92 0.81 0.75 0.65 0.65 0.68 0.70 0.65 (7.5) 0.57 0.59
10.0 (8.2) 0.68 0.73 0.65 0.65 0.59 0.62 0.65 0.47 0.47 0.52
11.0 0.64 0.63 0.65 0.65 0.49 0.53 0.56 0.55 (9.8) 0.37 0.42 0.45
12.0 (10.4) 0.54 0.57 0.59 0.48 0.46 0.48 0.50 0.27 0.35 0.38 0.40
13.0 0.50 0.50 0.52 (11.2) 0.39 0.42 0.44 0.28 0.32 0.34
14.0 (12.6) 0.44 0.46 0.36 0.37 0.39 0.26 0.29
15.0 0.40 0.42 (13.4) 0.31 0.34
16.0 (14.8) 0.37 0.29 0.30
17.0 0.34 (15.5) 0.25
18.0 (16.9)
10B-14
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 8.3 m/Max. outrigger extended width 2.80 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
2.5
3.0.
3.5 1.40
4.0 1.40 1.40
4.5 1.40 1.40 1.40
5.0 1.40 1.40 1.40 1.40
5.5 1.40 1.40 1.14 1.40 1.40 1.40
6.0 (5.3) 1.40 1.14 0.75 1.40 1.40 1.40 1.35
7.0 1.40 1.14 0.75 0.65 (5.8) 1.40 0.94 1.40 1.35 1.40
8.0 1.40 1.14 0.75 0.65 0.65 1.40 0.94 0.75 (6.4) 1.35 0.90 1.26
9.0 (7.5) 1.14 0.75 0.65 0.65 1.40 0.94 0.75 0.65 1.35 0.90 0.65 (7.6) 0.97 0.85
10.0 1.12 0.75 0.65 0.65 (8.1) 0.94 0.75 0.65 0.55 (8.6) 0.90 0.65 0.55 0.83 0.63 (8.7) 0.67
11.0 (9.7) 0.75 0.65 0.65 0.94 0.75 0.65 0.55 0.90 0.65 0.55 0.45 (9.9) 0.63 0.48 0.56
12.0 0.75 0.65 0.65 (10.3) 0.75 0.65 0.55 (10.8) 0.65 0.55 0.45 0.61 0.48 0.48
13.0 (11.9) 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 0.60 0.48 0.37 0.39
14.0 0.65 0.65 (12.5) 0.65 0.55 0.55 0.45 (12.1) 0.48 0.37 0.30 0.38 0.36
15.0 0.65 0.65 0.65 0.55 0.55 0.45 0.48 0.37 0.30 (13.2) 0.31
16.0 (14.1) 0.62 (14.6) 0.55 0.55 0.45 (14.3) 0.37 0.30 0.29
17.0 0.61 0.55 (15.2) 0.45 0.37 0.30 (15.4)
10B-15
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 8.3 m/Max. outrigger extended width 1.65 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
3.5 1.40
4.0 1.40 1.40
4.5 1.40 1.40 1.40
5.0 1.40 1.40 1.26 1.12
5.5 1.28 1.22 1.14 1.09 1.09 0.96
6.0 (5.3) 1.07 1.08 0.75 1.00 0.95 0.84 0.83
7.0 0.84 0.86 0.75 0.65 (5.8) 0.74 0.76 0.75 0.64
8.0 0.75 0.69 0.74 0.65 0.65 0.59 0.61 0.65 (6.4) 0.50 0.52
9.0 (7.5) 0.57 0.61 0.64 0.65 0.57 0.49 0.53 0.56 0.42 0.40 0.46
10.0 0.50 0.52 0.54 0.56 (8.1) 0.40 0.45 0.47 0.49 (8.6) 0.30 0.36 0.40
11.0 (9.7) 0.44 0.47 0.49 0.37 0.37 0.40 0.42 0.28 0.32 0.35
12.0 0.38 0.40 0.42 (10.3) 0.30 0.34 0.36 0.26 0.28
13.0 (11.9) 0.35 0.37 0.27 0.28 0.31
14.0 0.31 0.33 (12.5) 0.23 0.26
15.0 0.30 0.29
16.0 (14.1)
10B-16
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 5.0 m/Max. outrigger extended width 4.10 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
2.5 1.40
3.0 1.40 1.40
3.5 1.40 1.40 1.40
4.0 1.40 1.40 1.40 1.40
4.5 1.40 1.40 1.14 1.40 1.40 1.40
5.0 1.40 1.40 1.14 1.40 1.40 1.40 1.35 1.40
5.5 (4.6) 1.40 1.14 0.75 (4.9) 1.40 1.01 1.40 1.35 1.40
6.0 1.40 1.14 0.75 1.40 1.01 (5.2) 1.35 0.90 1.40 1.40
7.0 1.40 1.14 0.75 0.65 1.40 1.01 0.75 1.35 0.90 1.00 1.40
8.0 (6.9) 1.14 0.75 0.65 0.65 1.40 1.01 0.75 0.65 1.35 0.90 0.65 1.00 0.63 (6.6) 0.82
9.0 1.12 0.75 0.65 0.65 (7.2) 1.01 0.75 0.65 0.55 (7.5) 0.90 0.65 0.55 1.00 0.63 0.82
10.0 0.75 0.65 0.65 1.01 0.75 0.65 0.55 0.90 0.65 0.55 0.45 (8.2) 0.63 0.48 (8.9) 0.48
11.0 0.75 0.65 0.65 (9.4) 0.75 0.65 0.55 (9.7) 0.65 0.55 0.45 0.63 0.48 0.37 0.48
12.0 0.75 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 (10.4) 0.48 0.37 0.36
13.0 (11.2) 0.65 0.65 (11.5) 0.65 0.55 (11.9) 0.55 0.45 0.48 0.37 0.30 0.36
14.0 0.65 0.65 0.65 0.55 0.55 0.45 (12.6) 0.37 0.30 0.36
15.0 (13.4) 0.63 (13.7) 0.55 0.55 0.45 0.37 0.30 (13.2)
10B-17
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 5.0 m/Max. outrigger extended width 2.80 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
2.5 1.40
3.0 1.40 1.40
3.5 1.40 1.40 1.40
4.0 1.40 1.40 1.40 1.40
4.5 1.40 1.40 1.14 1.40 1.40 1.40
5.0 1.40 1.40 1.14 1.40 1.40 1.40 1.35 1.40
5.5 (4.6) 1.40 1.14 0.75 (4.9) 1.40 1.01 1.40 1.35 1.40
6.0 1.40 1.14 0.75 1.40 1.01 (5.2) 1.35 0.90 1.40 1.40
7.0 1.40 1.14 0.75 0.65 1.40 1.01 0.75 1.35 0.90 1.00 1.40
8.0 (6.9) 1.14 0.75 0.65 0.65 1.40 1.01 0.75 0.65 1.35 0.90 0.65 1.00 0.63 (6.6) 0.82
9.0 1.12 0.75 0.65 0.65 (7.2) 1.01 0.75 0.65 0.55 (7.5) 0.90 0.65 0.55 1.00 0.63 0.82
10.0 0.75 0.65 0.65 1.01 0.75 0.65 0.55 0.90 0.65 0.55 0.45 (8.2) 0.63 0.48 (8.9) 0.48
11.0 0.75 0.65 0.65 (9.4) 0.75 0.65 0.55 (9.7) 0.65 0.55 0.45 0.63 0.48 0.37 0.48
12.0 0.75 0.65 0.65 0.75 0.65 0.55 0.65 0.55 0.45 (10.4) 0.48 0.37 0.36
13.0 (11.2) 0.65 0.65 (11.5) 0.65 0.55 (11.9) 0.55 0.45 0.48 0.37 0.30 0.36
14.0 0.65 0.65 0.65 0.55 0.55 0.45 (12.6) 0.37 0.30 0.36
15.0 (13.4) 0.63 (13.7) 0.55 0.55 0.45 0.37 0.30 (13.2)
10B-18
Total Rated Loads REACH TOWER CRANES
LT300-2
Auxiliary hook working Unit: ton
Main boom length 5.0 m/Max. outrigger extended width 1.65 m (Working radius Horizontal boom angle)
Main boom angle 78 Main boom angle 74 Main boom angle 70 Main boom angle 60 Main boom angle50
Work-
ing Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom
radius length(m)
(m)
3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5 12.7 14.9 3.9 6.2 8.4 10.5
2.5 1.40
3.0 1.40 1.40
3.5 1.40 1.40 1.40
4.0 1.40 1.40 1.40 1.40
4.5 1.40 1.40 1.14 1.40 1.40 1.40
5.0 1.40 1.40 1.14 1.40 1.40 1.40 1.35 1.26
5.5 (4.6) 1.39 1.14 0.75 (4.9) 1.32 1.01 1.36 1.25 1.09
6.0 1.23 1.14 0.75 1.16 1.01 (5.2) 1.10 0.90 0.95 0.83
7.0 0.99 1.00 0.75 0.65 0.92 0.94 0.75 0.86 0.89 0.75 0.70
8.0 (6.9) 0.81 0.75 0.65 0.65 0.87 0.76 0.75 0.65 0.77 0.72 0.65 0.59 0.61 (6.6) 0.49
9.0 0.60 0.72 0.65 0.65 (7.2) 0.63 0.68 0.65 0.55 (7.5) 0.59 0.63 0.55 0.56 0.50 0.38
10.0 0.61 0.64 0.65 0.58 0.57 0.60 0.55 0.52 0.54 0.55 0.45 (8.2) 0.41 0.45 (8.9)
11.0 0.52 0.56 0.58 (9.4) 0.49 0.52 0.54 (9.7) 0.46 0.48 0.45 0.36 0.37 0.37
12.0 0.51 0.48 0.51 0.45 0.45 0.47 0.39 0.42 0.44 (10.4) 0.30 0.34
13.0 (11.2) 0.42 0.45 (11.5) 0.39 0.42 (11.9) 0.36 0.39 0.26 0.28
14.0 0.40 0.40 0.36 0.37 0.33 0.34 (12.6)
10B-19
Total Rated Loads REACH TOWER CRANES
LT500-1
Main hook working Unit: ton
Outrigger maximum extended width 6.3 m (Working radius Main boom angle)
Working Main boom length 10.9 m Main boom length 17.9 m Main boom length 24.9 m
radius Horizontal boom angle Horizontal boom angle Horizontal boom angle
(m) 20 30 40 55 78 20 30 40 55 78 20 30 40 55 78
2.0
2.5
3.0 12.00
3.5 12.00 11.56 10.00
4.0 12.00 11.05 10.29 10.00
4.5 11.51 10.59 9.90 9.72 9.75
5.0 10.98 10.17 9.53 8.75 8.40 9.00 9.04 9.07
5.5 10.51 9.78 9.19 8.51 8.30 8.36 8.41 8.45 6.00 6.00
6.0 10.07 9.42 8.87 8.28 7.79 7.83 7.87 7.92 7.96 6.00 6.00 6.00 6.00
7.0 9.30 8.78 8.31 7.90 6.78 6.83 6.87 6.91 6.94 5.38 5.46 5.52 5.55 5.51
8.0 8.63 8.20 7.84 7.59 5.93 5.98 6.01 6.04 4.64 4.72 4.77 4.79 4.74
9.0 8.06 7.70 7.45 7.53 5.20 5.24 5.27 5.29 4.01 4.08 4.13 4.15
10.0 7.57 7.28 7.13 4.56 4.61 4.63 4.65 3.47 3.53 3.58 3.59
11.0 6.21 6.27 6.29 4.01 4.05 4.08 4.09 3.00 3.06 3.09 3.10
12.0 5.09 5.12 3.53 3.57 3.59 3.59 2.59 2.64 2.67 2.67
13.0 4.20 3.10 3.13 3.14 3.14 2.22 2.27 2.29 2.28
14.0 2.71 2.74 2.75 1.90 1.94 1.95 1.94
15.0 2.21 2.30 2.34 1.60 1.64 1.65 1.63
16.0 1.62 1.68 1.70 1.34 1.37 1.37 1.35
17.0 1.11 1.15 1.14 1.10 1.12 1.12 1.09
18.0 0.67 0.68 0.72 0.80 0.85
19.0 0.45
Dangerous
29 30 49 49 50
angle
10B-20
Total Rated Loads REACH TOWER CRANES
LT500-1
Auxiliary hook working Unit: ton
Main boom length 17.9 m/Max. outrigger extended width 6.3 m (Working radius Horizontal boom angle)
Working Main boom angle 78 Main boom angle 70 Main boom angle 60 Main boom angle 50
radius Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m) Horizontal boom length (m)
(m) 7.0 12.1 17.1 22.1 7.0 12.1 17.1 22.1 7.0 12.1 17.1 22.1 7.0 12.1 17.1 22.1
4.5 3.00
5.0 3.00
6.0 3.00
7.0 3.00 3.00
8.0 3.00 3.00 3.00 3.00
9.0 3.00 3.00 3.00 3.00
10.0 (8.4) 3.00 3.00 3.00 3.00
11.0 3.00 3.00 3.00 3.00 3.00
12.0 3.00 3.00 3.00 (10.8) 3.00 3.00
13.0 3.00 3.00 2.84 3.00 3.00 3.00
14.0 3.00 2.86 2.65 3.00 3.00 3.00
15.0 (13.4) 2.67 2.47 3.00 3.00 2.90 (13.6) 3.00 2.51
16.0 2.49 2.31 3.00 3.00 2.70 2.96 2.19
17.0 2.33 2.18 (15.8) 2.80 2.53 2.73 2.05
18.0 2.19 2.05 2.62 2.39 2.51 2.40 (16.2)
19.0 2.12 1.94 2.45 2.25 2.19 2.24 1.60
20.0 (18.5) 1.84 2.31 2.13 (18.7) 2.09 1.43
21.0 1.75 2.14 2.02 1.96 1.82 1.28
22.0 1.68 (20.9) 1.91 1.83 1.72 1.23
23.0 1.61 1.82 1.68 1.63 (21.2) 1.06
24.0 1.60 1.74 1.47 1.55 0.96
25.0 0.96 1.66 (23.7) 1.45 0.86
26.0 (23.5) 1.60 1.34 0.78
27.0 (25.9) 1.24 0.74 0.71
28.0 1.15 (26.3) 0.64
29.0 0.90 0.58
30.0 (28.8) 0.52
31.0 0.47
32.0 0.44
33.0 (31.3)
10B-21
Working Radius vs. REACH TOWER CRANES
Lifting Height
LT300-2
Main hook working
33
81.5 30
13
30
60
14.9m+3.2 Boom
20
81.5
11.6m+3.2 Boom
8.3m+3.2 Boom 15
30
5.0m+3.2 Boom
10
13
5
0
0 5 10 15 21
Working radius (m)
FVBH0090
15 15
10 10
5 5
0 0
0 5 10 15 21 0 5 10 15 21
Working radius (m) Working radius (m)
FVBH0091 FVBH0092
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10B-22
Working Radius vs. REACH TOWER CRANES
Lifting Height
LT300-2
Auxiliary hook working
15 15
10 10
5 5
0 0
0 5 10 15 21 0 5 10 15 21
Working radius (m) Working radius (m)
FVBH0093 FVBH0094
14.9m+14.9m Boom 33 33
14.9m+12.7m Boom
30 30
14.9m+10.5m Boom
14.9m+8.4m Boom 47
14.9m+10.5m Boom
Lifting height above ground (m)
50
10 10
5 5
0 0
0 5 10 15 20 22 0 5 10 15 20 22
Working radius (m) Working radius (m)
FVBH0095 FVBH0096
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10B-23
Working Radius vs. REACH TOWER CRANES
Lifting Height
LT500-1
Main hook working
40
4 55
30 0
78
20
9
35
24.9m+5.8m Boom
30
17.9m+5.8m Boom
25
15
82
70
60
48 10
40
28
20
5
9
0
0 5 10 1 5 20 25
Working radius (m)
FVBH0097
25 25
20 20
15 15
10 10
82
78
5 5
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
Working radius (m) Working radius (m)
FVBH0098 FVBH0099
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10B-24
Working Radius vs. REACH TOWER CRANES
Lifting Height
LT500-1
Auxiliary hook working
24.9m+22.1m Boom 50 24.9m+22.1m Boom 50
61
24.9m+17.1m Boom 45 24.9m+17.1m Boom 45
50
51
25 25
20 20
15 15
10 10
70
60
5 5
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
Working radius (m) Working radius (m)
FVBH0100 FVBH0101
50 50
45 45
17.9m+22.1m Boom 40 40
17.9m+17.1m Boom 35 35
41 10.9m+22.1m Boom
17.9m+12.1m Boom 30 30
30
10.9m+17.1m Boom
17.9m+7.0m Boom 20 25 25
10.9m+12.1m Boom
10
20 26 20
10.9m+7.0m Boom
15 15
10
10 10
50
35
5 5
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
Working radius (m) Working radius (m)
FVBH0102 FVBH0103
This figure indicates the relation between working radius and lifting height above ground in the state where
outriggers are fully extended, and does not include boom deflection.
10B-25
MEMO
CONTENTS
INDEX
SECTION 11
MOBILE CRUSHERS & Sec 11A
RECYCLERS
MOBILE WOOD TUB GRINDERS Sec 11B
MOBILE SOIL RECYCLERS Sec 11C
MOBILE BELT CONVEYORS Sec 11D
MOBILE SCREENS Sec 11E
SECTION 11A
MOBILE CRUSHERS
& RECYCLERS
CONTENTS
Benefits ................................................................... 11A-2
Features .................................................................. 11A-3
Type of crushers/recyclers .................................... 11A-4
Model and application ........................................... 11A-5
Specifications ......................................................... 11A-6
Dimensions ............................................................. 11A-7
Productivity ............................................................ 11A-9
11A-1
Benefits MOBILE CRUSHERS
& RECYCLERS
Benefits Of Mobile Crusher & Recycler
1. Demolished wasted material (concrete, asphalt, brick, etc.) can be re-used effectively.
2. As the wasted material can be utilized again, the cost for purchasing new material can be saved.
3. The cost for hauling and dumping (of the wasted material) with trucks can be minimized.
4. Even when the processed material should be used outside, the transportation cost can be much saved.
(because of the compactness of the material)
5. The elimination of the trucking also offers less generation of the exhaust gas.
6. The machine can be used whenever and wherever you like because of its mobility.
Hydraulic excavator
Machine-mounted type
magnetic separator
Undersized
material
Oversized
material
Vibrating screen
Wheel loader
Truck
11A-2
Features MOBILE CRUSHERS
& RECYCLERS
! Jaw crusher, with superior crushing force and reliability, is installed.
(BR100JG, BR210JG, BR350JG, BR550JG, BR1600JG)
Natural rock, concrete, asphalt concrete, etc., can be crushed with strong force.
! Impact crusher can perform fine crushing and produce round final product.
(BR100RG, BR250RG, BR480RG)
Asphalt concrete, concrete debris, bricks, some natural stone., etc can be crushed.
! The first crawler-type dual-axis shear (crusher) (BR200S, 300S) in the world.
Mattresses and car tires can be sheared in a single stroke.
Easy processing of scrap materials.
Piece cutter with superior shearing force is adopted.
! Easy transportation and superb maneuverability
Compact crawler undercarriage is adopted, facilitating job site access/exit.
! Semi-Automatic Material Feeding Control is installed
The Komatsu original controller optimizes material feeding amount to the crusher.
Plate feeder with speed controller keeps the operation of crusher uniform and stabilized. Thus, unmanned
operation is possible.
(BR100JG, BR210JG, BR350JG, BR550JG, BR1600JG, BR100RG, BR250RG, BR480RG)
! Simple control and easy operation
Raising/lowering of belt conveyor and removal of foreign materials are easy.
Crushing work is facilitated by preventive functions of macadam accumulation and debris clogging.
(BR100JG, BR210JG, BR350JG, BR550JG, BR1600JG, BR100RG, BR250RG, BR480RG)
! Options for more effective system
Ample powered hydraulic-driven optional equipment is available, such as a magnetic separator (chassis
mounted), vibratory screen and secondary/tertiary belt conveyors etc., to provide an effective system.
! Low-noise and low vibration design
Low-noise type engine; sound absorbing material; low-speed high-torque type hydraulic pump;
soundproof muffler, etc., are adopted. Thus, overall noise level is low.
! Highly reliable hydraulic drive system
Crusher, feeder and belt conveyor are driven respectively by independent hydraulic pumps, assuring high
reliability and easy maintenance.
11A-3
Type of Crushers/Recyclers MOBILE CRUSHERS
& RECYCLERS
Komatsu mobile crushers are classified into 3 types.
The jaw crusher can crush large blocks and is suitable for crushing concrete debris and natural stone. It has
a swing jaw plate and fixed jaw plate. Those jaw plates crunch material.
The impact crusher is used for secondary crushing and granulation of asphalt, concrete debris, and natural
stone. It produces round grains in many cases and is suitable for production of relatively fine grains. The
blocks put in the impact crusher are thrown in the tangential direction by the blow bar of the rotor which is
rotating at high speed and are crushed by collision with the impact plate. They are also crushed by collision
with each other.
The shear shreds industrial waste as well as bulky domestic refuse to reduce its volume, thereby contributing
to extending the service life of disposal sites.
[JAW CRUSHER]
Material to be crushed Swing
Vibratory grizzly jaw plate
Feed-in bar(2 stage)
hopper Fixed Crusher Primary belt conveyor
jaw plate motor Magnetic separator motor
Vibratory grizzly
feeder
Vibrator
Primary Primary
belt conveyor belt conveyor FKZ00163E
lift cylinder Muck
removing chute
[IMPACT CRUSHER]
Material to be crushed
Grizzly bars(2 stage) Impact plates
Hopper
Magnetic separator (Optional)
Vibratory grizzly
feeder
Vibrator Primary belt conveyor
M-type chute
Blow bar
Rotor FVZM0560E
Piece cutters
(monolithic cutters)
FZBH0289
Dual-axis shear
11A-4
Model and Application MOBILE CRUSHERS
& RECYCLERS
CRUSHER OUTPUT
mm *0-100 to 0-200
0-40 to 0-80 0-40 to 0-80 0-50 to 0-120 **0-70 to 0-200
CRUSHING CAPACITY *18-56 *38-85 *50-165 *100-460
ton/h **20-54 **35-76 **48-160 **130-400
FVBH0227 FVBH0228
CRUSHER OUTPUT
mm 0-150 to 0-300 0-20 0-20 0-40
CRUSHING CAPACITY ton/h 14-28 55-70 170-400
* Concrete debris : MOST SUITABLE : SUITABLE
** Natural stone (andesite)
CRUSHER OUTPUT
mm
CRUSHING CAPACITY ton/h N.A. N.A.
* Concrete debris : MOST SUITABLE : SUITABLE
** Andesite
11A-5
Specifications MOBILE CRUSHERS
& RECYCLERS
11A-6
Dimensions MOBILE CRUSHERS
& RECYCLERS
H
C B
G
N
M
D E
L
K A
Unit: mm (ft.in)
BR100JG-2 BR210JG-1 BR350JG-1 BR550JG-1 BR1600JG-1
8070 (26'6") 9800 (32'2") 12675 (41'7") 13430 (44'1") 18500 (60'8")
A
*8070 (26'6") *9800 (32'2") *12675 (41'7") *13430 (44'1")
2700 (8'10") 2890 (9'6") 3100 (10'2") 3640 (11'11")
B
*2515 (8'3") *2890 (9'6") *3100 (10'2") *3395 (11'2")
C 2515 (8'3") 2700 (8'10") 3100 (10'2") 3640 (11'11") 7755 (25'5")
D 2115 (6'11") 2750 (9') 3445 (11'4") 3700 (12'2") 4995 (16'5")
E 3795 (12'5") 4630 (15'2") 6265 (20'7") 6145 (20'2")
F 205 (8") 250 (9.8") 430 (1'5") 350 (1'2") 560 (1'10")
G 1500 (4'11") 1995 (6'7") 2500 (8'2") 3000 (9'10") 3050 (10')
H 2165 (7'1") 2830 (9'4") 3725 (12'3") 4365 (14'4")
I 1840 (6') 2220 (7'3") 2395 (7'10") 2805 (9'2") 3720 (12'2")
2345 (7'8") 2700 (8'10") 2996 (9'10") 3115 (10'3") 5470 (17'11")
J
*2200 (7'3") *2700 (8'10") *2905 (9'7") *2995 (9'10")
K 2100 (6'11") 2500 (8'3") 2780 (9'1") 2980 (9'9") 4600 (15'1")
L 1700 (5'7") 2000 (6'7") 2280 (7'6") 2480 (8'2") 3900 (12'10")
M 600 (24") 600 (24") 900 (35.4") 1050 (41.3") 1400 (55.1")
N 400 (16") 500 (20") 500 (20") 500 (20") 700 (28")
* at transportation
H
I M J
B
C G
F
N D E
L A
K
Unit: mm (ft.in)
BR100RG-1 BR250RG-1 BR480RG-1
5850 (19'2") 11100 (36'5") 14250 (46'9")
A
*5850 (19'2") *11100 (36'5") *14250 (46'9")
2455 (8'1") 3150 (10'4") 4120 (13'6")
B
*2455 (8'1") *3150 (10'4") *3496 (11'6")
C 2410 (7'11") 3150 (10'4") 3470 (11'5")
D 2130 (7') 3440 (11'3") 3655 (12')
E 2315 (7'7") 5660 (18'7") 6530 (21'5")
F 205 (8") 219 (8'6") 285 (11")
G 700 (2'4") 2040 (6'8") 3000 (9'10")
H 1370 (4'6") 3230 (10'7") 4390 (14'5")
I 1625 (5'4") 2340 (7'8") 2990 (9'10")
2200 (7'3") 2810 (9'3") 2995 (9'10")
J
*2200 (7'3") *2810 (9'3") *2995 (9'10")
K 2150 (7'1") 2780 (9'1") 2960 (9'9")
L 1700 (5'7") 2280 (7'6") 2460 (8'1")
M 600 (24") 900 (35.4") 1200 (47.2")
N 450 (18") 500 (20") 500 (20")
* at transportation
11A-7
Dimensions MOBILE CRUSHERS
& RECYCLERS
Unit: mm (ft.in)
BR200S-1 BR300S-1
6870 (22'6") 8650 (28'5")
A
*6870 (22'6") *8650 (28'5")
3290 (10'10") 3880 (12'9")*
B
*2940 (9'8") *3160 (10'4")
C 2536 (8'4") 3020 (9'11")
D 2750 (9') 3260 (10'8")
E 2250 (7'5") 2920 (9'7")
F 3050 (10') 4000 (13'1")
G 980 (3'3") 905 (3")
H 2360 (7'9") 2760 (9'1")
I 2400 (7'10") 2720 (8'11")
2825 (9'3") 3295 (10'10")
J
*2780 (9'1") *2997 (9'10")
K 2780 (9'1") 2780 (9'1")
L 2280 (7'6") 2280 (7'6")
M 900 (2'11") 900 (35")
N 500 (1'8") 500 (20")
* at transportation
11A-8
Productivity MOBILE CRUSHERS
& RECYCLERS
Calculation of the production capacity of a mobile crusher varies largely with the type of the crusher,
properties of supplied material and rocks, quantity of muck in the material, clearance of discharge setting,
rotation speed of the crusher, and size of the products required by the customer, etc.
The following are the basic elements for calculation of production capacity of each crusher.
! Relationship between elements for calculation of production capacity of jaw
crusher
Production capacity Large > Small Remarks
Clearance of discharge setting Wide Narrow
Hardness of material Soft Hard Hard material may crush easily
Ratio of muck in material (in crusher) Low High
Wetness of material Dry Wet
Impurities in material Less Many
Efficiency becomes highest when supply rate is 60 70% of
Supply rate in crusher High
volume of crusher.
Size of material Small Large
* When recommending production capacity, confirm the properties of the rock samples from the customer's quarry by
crushing them actually.
* Basically, the production capacity and size of produced grains are decided by the quantity, size, and hardness of the
material, clearance between the blow bar and impact plate, and rotor speed. Since the production capacity is in inverse
proportion to the size of the produced grains, adjust the changeable elements of the machine, feed rate, rotor speed,
clearance between the blow bar and impact plate, etc., according to the type of the material and the grain size required by
the customer. Then, use a proper screen and put oversized material again.
* For the rough standard of the production capacity, see the catalogs and sales material for the mobile crusher.
* If the production capacity of a mobile crusher in a customer's jobsite is necessary, ask Komatsu.
11A-9
MEMO
SECTION 11B
MOBILE WOOD
TUB GRINDERS
CONTENTS
Features .................................................................. 11B-2
Specifications ......................................................... 11B-3
Dimensions ............................................................. 11B-4
11B-1
Features MOBILE WOOD
TUB GRINDERS
The scatter prevention guard ensures efficient grinding of tree roots, stumps and waste lumber.
The hydraulic grind mill with its carbon grinder bits realizes a large output.
Inclined cover
Screen
Movable tub
Grind mill
Discharge conveyor belt
Magnetic
separator
(option)
11B-2
Specifications MOBILE WOOD
TUB GRINDERS
** Including conveyer
11B-3
Dimensions MOBILE WOOD
TUB GRINDERS
B
F
G.L E
I J
H D
G A
Unit: mm (ft.in)
BR120T-1 BR200T-1
8520 (27'11") 12850 (42'2")
A
*8330 (27'4") *9975 (32'9")
2950 (9'8") 3980 (13'1")
B
*2710 (8'11") *3100 (10'2")
2790 (9'2") 3570 (11'9")
C
*2440 (8') *3000 (9'10")
D 2235 (7'4") 2750 (9')
E 250 (10") 250 (10")
F 2575 (8'5") 3090 (10'2")
G 2290 (7'6") 2880 (9'5")
H 1840 (6'1") 2380 (7'10")
I 700 (28") 900 (35.4")
J 450 (18") 500 (20")
* at transportation
11B-4
SECTION 11C
MOBILE SOIL
RECYCLERS
CONTENTS
Features .................................................................. 11C-2
Specifications ......................................................... 11C-3
Dimensions ............................................................. 11C-4
11C-1
MOBILE SOIL
RECYCLERS
Features
Waste soil in the course of various construction job site can be processed on site, allowing the soil to be
recycled.
Costs for waste soil disposing, new materials and transportation can be greatly reduced by on site
recycling.
11C-2
Specifications MOBILE SOIL
RECYCLERS
Model
BZ210
Item
OPERATING WEIGHT kg (lb) 20500 (45,190)
FLYWHEEL HORSEPOWER HP (kW)/RPM 144 (107)/1950
MIXER PERFORMANCE:
Processing capacity m3/h (cu.yd/h) 40 - 150 (52 -195)
Mixing method Soil cutter and triple rotary hammer
Row material soil hopper volume m (cu.yd)
3
2.0 (2.4)
Max. material size mm (in) 200 (7'9")
Solidifying material hopper capacity m3 (cu.yd) 3.0 (3.9)
Solidifying material feed adjustment range kg/m3 (lb/cu.yd) 9 - 400 (15 - 674)
ENGINE: KOMATSU
Model SAA6D102E
No. of cylinder- bore stroke mm 6-102 120
(in) (4.02 4.72)
Piston displacement ltr. (cu.in) 5.88 (359)
DIMENSIONS:
Overall length* 13210 (43'4")
Overall height (transport) 4560 (15'0")
mm (ft.in)
Overall width (transport) 2850 (9'4')
Length of track on ground 2750 (9')
Track gauge 2350 (7'9')
CAPACITY:
Fuel tank ltr. (U.S. Gal) 400 (107)
Hydraulic tank 240 (63)
* Including conveyer
11C-3
Dimensions MOBILE SOIL
RECYCLERS
2400(7'10")
( )
2700(8'10")
)
3510(11'6")
)
(
(
2900((9'6")
4560(15')
4385(14'5")
)
(During transport)
(During transport)
3100(10'2"))
(
3250(10'8"))
2450(8')
( )
(
(
1600(5'3")
( )
(Under the rubber chute)
Ground clearance
c
300(1') 6860(22'6")
( )
900(2'11
900(2'11")
0 13210(43'4")
( )
500(20")
2350(7'9")
( )
2850(9'4")
( )
(Durring trasport) FVBH0225
11C-4
SECTION 11D
MOBILE BELT
CONVEYORS
CONTENTS
Features .................................................................. 11D-2
Specifications ......................................................... 11D-3
Dimensions ............................................................. 11D-4
11D-1
Features MOBILE BELT
CONVEYORS
Transportable to any site. Automatically moves materials vertically, horizontally.
With the BM2009C, movement and conveyor drive run using the hydraulic drive which uses the power unit
of the vehicle, so there is no need for a generator.
By controlling the height and the movement of the conveyor with the cylinder, the BM2009C conveyor can
make numerous 7 meter high, approximately 500m3 (654yd3) piles of conveyed material.
Because the front and rear portions of the conveyor can be folded, it can be transported on a flat-bed
trailer.
All components are compatible with Komatsu's hydraulic excavator. We have taken into consideration for
improved reliability and ease of parts replacement.
11D-2
Specifications MOBILE BELT
CONVEYORS
Model
BM2009C BM2014C
Item
OPERATING WEIGHT kg (lb) 12600 (27,780) 19500 (42,990)
FLYWHEEL
HP (kW)/RPM 79 (59)/1900 125 (93)/1870
HORSEPOWER
PERFORMANCE:
Travel speed km/h (MPH) 1.0 (0.62) 2.0 (1.24)
DIMENSIONS:
Overall length 21100 (69'3") 21160 (69'5")
Overall length (transport) mm (ft.in) 4775 (15'8") 11020 (36' 2")
Overall width 2605 (8'7") 3100 (10' 2")
Overall height 3800 (12'6") 3460 (11'4")
Overall height (transport) 3020 (9'11")*1 3135 (10'3")*1
ENGINE: KOMATSU KOMATSU
Model 4D102E S6D102E
No. of cylinders- mm 4-102 x 120 6-102 120
bore stroke (in) (4.05 x 4.72) (4.02 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 5.88 (359)
CONVEYOR SPEC.
Conveyable distance mm (ft.in) 20000 (65'7") 20000 (65'7")
Belt width mm (ft.in) 900 (2'11") 1400 (4'7")
Belt speed m/min (MPH) 129 (4.81) 135 (5.03)
Angle of incline degree 0 ~ 17 0 ~ 17
Maximum height of mm (ft.in) 6200 (20'4") 6300 (20'8")
discharge
Maximum weight
conveyable
During level operation ton/n (U.S. /ton) 400 (441)*2 1000 (1100)*3
When operating at 20 ton/n (U.S. /ton) 330 (364)*2 870 (959)*4
Drive method Hydraulic motor drive Hydraulic motor drive
*1 When removing both sides belt conveyor brackets.
*2 In the case of andesite of 0 ~ 170 mm (6.7")
*3 In the case of andesite of 0 ~ 300 mm (11.8")
*4 In the case of andesite of 0 ~ 150 mm (5.9") when operating more than 15
11D-3
Dimensions MOBILE BELT
CONVEYORS
BM2009C
BM2014C
11D-4
SECTION 11E
MOBILE SCREENS
CONTENTS
Features ...................................................................11E-2
Specifications ..........................................................11E-3
Dimensions ..............................................................11E-4
11E-1
Features MOBILE SCREENS
11E-2
Specifications MOBILE SCREENS
11E-3
Dimensions MOBILE SCREENS
600(2'6")
Screen width
1800(5'11")
900(2'11")
Screen length 1300
3000(9'10") (4'3")
9495(31'2") 600(2'6")
2880(9'5") 2680(8'10")
3530(11'7")
2500(8'3")
2500(8'3")
2525(8'3")
500(20") 3260(10'8")
2980(9'9") 12735(41'9")
FVBH0170
900(2'11")
Screen width
1800(5'11")
900(2'11")
6770(22'3")
2880(9'5") 2680(8'10")
3530(11'7")
2500(8'3")
2500(8'3")
500(20") 3260(10'8")
2980(9'9") 12735(41'9")
FVBH0171
11E-4
CONTENTS
INDEX
SECTION 12
ENGINE
GENERATOR SETS
CONTENTS
Features .....................................................................12-2
Specifications ............................................................12-3
12-1
Features ENGINE
GENERATOR SETS
1. New Engine
Komatsu "Air-to-Air Aftercooled Engine" has been introduced. (Except for EGS45-5 to EGS300-3, and EGS650-3)
High Output (Performance)
Low Fuel Consumption
Low Noise
Lighter Weight and Compactness
Longer Oil Change Interval
Easy Maintenance
High Quality, High Reliability, High Durability
2. Easy Operation and Control
2-1.Engine & Generator control panel is arranged in one box, and located in front of Generator.
So the operator can monitor the operating status easily by viewing the meters.
Advantage:
Simple: Minimized control equipment and wiring
Easy Maintenance
2-2.Compact Engine Control Unit
EGS Series generators have a compact engine control unit (1 box type) for easy operation and maintenance.
Advantage and Functions
Microprocessor: Control status and factor are programmed in Microprocessor.
High Reliability: Engine control circuit is integrated in printed boards.
Easy selection: A Mode Key Switch for off/Auto/Manual
Built-in AMF function: Auto Start/Stop, Cranking with attempts and Cool running are Standard Function.
Iconic, Symbols and LED: Operating process and Alarm condition can be monitored.
3. High qualified electricity with Brushless, Self-excited AC Alternator
Maintenance-Free: Brushless, Direct coupling with engine
High Electric Characteristic: Standard 2/3 pitch windings avoid excessive neutral currents.
Excellent Voltage Build-Up: Originally designed excited field system and high efficient steel
Stable Voltage Regulation: Built-in type Automatic Voltage regulator (AVR)
High Efficient Cooling: Class H insulation with forced air-circulation
Permanent Magnet Generator (PMG) (Optional): PMG systems provides constant excitation
Voltage Adjustment (Optional accessory by model): The voltage can be adjusted manually.
Dual Voltage (Optional): Two kinds of voltage can be given.
4. Safe Running (Protection)
MCCB (Molded Case Circuit Breaker) can be opened by Over Current automatically.
The engine can be stopped by High coolant temperature/Low oil pressure automatically
The engine can be stopped by Over speed.
Engine stop system: Energized in Run mode
The engine can be stopped automatically in case of the following condition.
(1) Over speed, (2) High coolant temperature, (3) Low oil pressure, (4) Emergency button is pushed.
5. Various Generator Type
EGS Series Generator has 4 types.
(1) Bonnet & Soundproof type with Control panel and MCCB: For single operation at residential area
(2) Non Bonnet type with Control panel and MCCB: For single operation in the room
(3) Non Bonnet type with Engine control panel: For parallel operation in the room
* Typical Generator Type
Bonnet & Soundproof type
Non Bonnet type for Single operation Non Bonnet type for Parallel operation
12-2
Specifications ENGINE
GENERATOR SETS
12-3
Specifications ENGINE
GENERATOR SETS
NOTE: Output Rating
1) Prime rating applies to continuous power supply. Intermittent overload up to the standby rating is allowed.
2) Standby rating is applicable for supplying electric power in the event of normal utility power failure.
No overload capability is available for this Standby rating.
This rating may be used for continuous service as long as the emergency lasts. (Approximately 1 hour.)
3) Performance: Horsepower represents of S.A.E. J1349 standards.
4) Barometric pressure: 743 mmHg, Temperature: 25C (77F), Water vapor pressure: 7.5 mmHg
12-4
Specifications ENGINE
GENERATOR SETS
NOTE: Output Rating
1) Prime rating applies to continuous power supply. Intermittent overload up to the standby rating is allowed.
2) Standby rating is applicable for supplying electric power in the event of normal utility power failure.
No overload capability is available for this Standby rating.
This rating may be used for continuous service as long as the emergency lasts. (Approximately 1 hour.)
3) Performance: Horsepower represents of S.A.E. J1349 standards.
4) Barometric pressure: 743 mmHg, Temperature: 25C (77F), Water vapor pressure: 7.5 mmHg
12-5
MEMO
CONTENTS
INDEX
SECTION 13
DEMOLITION Sec 13A
ROAD MAINTENANCE Sec 13B
EQUIPMENT
TRIMMING DOZERS Sec 13C
RAILWAY MAINTENANCE Sec 13D
MACHINES
OTHERS Sec 13E
SECTION 13A
DEMOLITION
CONTENTS
Machine and attachment
Selection (guide line) ........................................ 13A-2
Attachment features and specifications:
Super long boom arm ....................................... 13A-4
Hydraulic crusher & cutter ............................... 13A-5
Hydraulic cutter & smasher .............................. 13A-7
Hydraulic crusher .............................................. 13A-8
Hydraulic shin-shear ......................................... 13A-9
Hydraulic smasher .......................................... 13A-10
Concrete jumbo crusher ................................. 13A-11
Hydraulic hi-punch .......................................... 13A-12
Power fork II ..................................................... 13A-13
Rotary grab ...................................................... 13A-14
13A-1
Machine and Attachments DEMOLITION
Selection (Guide Line)
1. When carrying out demolition of concrete building from the ground
1) For demolition of 4~10 storied buildings use a hydraulic excavator with a super long boom and arm as
base machine.
2) For demolition of 2~4 storied buildings use a hydraulic excavator with a normal boom and arm as the base
machine.
3) For demolition of the foundations or areas below ground level, use a hydraulic excavator with the normal
boom and arm as the base machine and operate from the ground level. If necessary, lower the machine
below the ground to carry out the work.
Type of
structure
Floor Wall Pillar Steel beam Foundation Secondary crushing & sorting
Type of
boom,arm
STD
1 BOOM
ARM
2
A
-
13A-2
Machine and Attachments DEMOLITION
Selection (Guide Line)
2. When carrying out demolition from inside the building being demolished
There is no space to carry out demolition work with machine from the ground level, or the building is too high
(higher than 6 stories) to demolished, and the demolition attachment does not reach, place the demolition
machine on the top floor of the building to be demolished. Start the demolition operation from the top, and
work down.
13A-3
Attachment Features and Specifications DEMOLITION
Super Long Boom Arm
Two kinds of boom-arms 3 piece and 2 piece available to achieve the best conditions for a
wide working range.
When transporting the machine, the boom, arm and bucket can be folded back speedily into a
compact set. (excluded PC750 and PC800)
PC300LC-6 PC400LC-6
Model
JDLB80S JDLB75S JDLB40L JDLB30L
Item
Applicable base machine PC800-6 PC750-6 PC400LC-6 PC300LC-6
A: Max. working height m 39.5 39.5 24 20
B: Forward-limit working range* m 20 20 12.3 11
C: Top pin reach at max. height mm 7060 7060 4350 4060
D: Overall length at transport mm Transport after 16610 14025
E: Overall height at transport mm disassembly 3420 3290
F: Tail length mm 4355 4355 3760 3585
Weight of crusher kg 2400 2400 2300 or less 2300 or less
Type of boom arm 3-piece type (4-part boom) 3-piece type 3-piece type
Additional counterweight Required Required Required Required
Operating weight** kg 98600 98300 50500 39400
Model
JDLB21L JDLB21L (2PC5)
Item
Applicable base machine PC210LC-6 PC210LC-6
A: Max. working height m 14.8 15.2
B: Forward-limit working range* m 7.6 8.3
C: Top pin reach at max. height mm 3740 4070
D: Overall length at transport mm 10750 12950
E: Overall height at transport mm 3110 3110
F: Tail length 2850 2850
Weight of crusher(Maximum) kg 2100 or less 2300 or less
Type of boom arm 3-piece type 2-piece type
Additional counterweight Required Required
Operating weight** kg 26660 26200
Notes : 1. Do not exceed the forward limit working range(*) and also avoid working at over-side position to losing balance.
2. To prevent the booms and arm from getting deformed or cracked, never push, pull, or swing objects right and left with
the booms and arm.
3. Demolishing must be done only with a crushing attachment.
4. (**): Including the additional counterweight, but excluding the crusher.
5. PC800 and PC750 require installation of the outtriggers.
6. As for PC800 and PC750, the boom can be shortened by detaching a part of boom so that the machine get wider
working reach.
7. Please contact your KOMATSU distributors about the details of local modifications, since base machine modifications
are required to install these attachments.
8. () Max. working height and forward-limit working range (above A and B) can be changed by removing of a part of
boom (PC800 and PC750).
13A-4
Attachment Features and Specifications DEMOLITION
Hydraulic Crusher & Cutter
The bolt on-type crusher point and cutter point can be interchanged with ease. The point for
smashing materials into small pieces can be attached or detached instantly.
Since a swing brake is built into the attachment, the free rotating force can be adjusted freely.
Boasts the largest opening width in its class.
The synchronous arm movement makes it possible to accurately catch the targeted portions of the
structure being demolished.
13A-5
Attachment Features and Specifications DEMOLITION
Hydraulic Crusher & Cutter
Model JCYC19/19R
With long cutter
Short cutter
Pulverizer
Long cutter
Smashing
point
13A-6
Attachment Features and Specifications DEMOLITION
Hydraulic Crucher & Smasher
360 free rotating system makes it possible to change the cutting angle freely.
Cutting can be done at any desired position or angle, a particular advantage at restricted job sites.
With the built-in swing brake, the free rotating force can be adjusted freely.
The synchronous movement of two arms makes it possible to accurately catch the targeted
portions of the structure being demolished.
The detachable point for smashing into smaller pieces can be installed or removed easily. This
point also can smash crushed concrete blocks into smaller pieces.
Steel-frame cutter is transformed into concrete crusher by exchanging arms.
360
Free rotation or
Hydraulic rotation
13A-7
Attachment Features and Specifications DEMOLITION
Hydraulic Crucher
Crushing can be done at any desired position or angle, a particular advantage at restricted job
sites.
With the built-in swing brake, the free rotating force can be adjusted freely.
The detachable point for smashing into smaller pieces can be installed or removed easily.
Boasts the widest opening width of its class 0~850 mm.
The synchronous arm movement makes it possible to accurately catch the targeted portions of the
structure being demolished.
360
Free rotation or
Hydraulic rotation
13A-8
Attachment Features and Specifications DEMOLITION
Hydraulic Shin-shear
Arm-top mounting maximizes reach and makes it possible to cut at any desired position or angle.
More compact and nearly 30% lighter than one of the boom-mount competitive shear for easier
operation and better maneuverability.
Unique self-aligning blade design with interlocking tips prevents blade spread.
360 free rotating or hydraulic rotating system makes it possible to change the attachment angle
easily.
Twin-cylinder blade mechanism operates nearly perpendicular to the blade, maximizing cutting
force and efficiency.
Less routine maintenance than any competitive shear.
Compact shape and arm-top mount allow loading/transport on standard carrier without removing
shear.
Model
JHSS200 JHSS200R JHSS400R
Item
PC200-6 PC220-6 PC200-6 PC220-6 PC300-6 PC400-6
Applicable base machine
PC200LC-6 PC220LC-6 PC200LC-6 PC220LC-6 PC300LC-6 PC400LC-6
a: mm 10715 10890 10895 11070 11205 11685
Work- b: mm 10790 11025 10970 11205 11660 12425
ing
range c: mm 7320 7560 7505 7745 7835 8085
d: mm 6660 6835 6475 6650 6745 7165
Weight: kg 2320 2385 4050
A: Max. opening width mm 480 680
B: Effective cutter length mm 520 870
C: Depth of opening mm 450 820
Attach- D: Jaw width (Upper) mm 300 440
ment E: Jaw width (Lower) mm 530
F: Arm width mm 1120
L: Overall length mm 2350 2530 2355 2390
H: Overall height mm 1250 2210
W: Overall width mm 840 750 850
Crushing force (Center) ton 152 200
(Hydraulic pressure) (325 kg/cm2) (300 kg/cm2)
Jaw speed Opening sec Approx. 3.2* Approx. 5.0*
(2-pump
merging) Closing sec Approx. 3.8* Approx. 5.3*
13A-9
Attachment Features and Specifications DEMOLITION
Hydraulic Smasher
Designed to smash broken concrete masses into small pieces, the Komatsu Smasher serves as a
highly effective tool in building demolition.
The smashing process helps in the recovery of reinforcing rods from demolished concrete
structures, and in the transporting of crushed concrete off the site.
Superb smashing performance.
Iron-rod cutter helps break demolished reinforced concrete into small pieces.
Model
JHSM250 JHSM350
Item
PC200-6 PC220-6 PC300-6 PC400-6
Applicable base machine
PC200LC-6 PC220LC-6 PC300LC-6 PC400LC-6
a: Max. working reach mm 10655 10890 11895 12640
Working
b: Max. working height mm 10580 10755 11210 11875
range
c: Max. dumping height mm 6420 6595 6280 6945
Weight: kg 1820 3480
A: Opening mm 0~810 0~850
B: Depth mm 760 980
C: Cutter length mm 180 180
Attachment D: Upper jaw width mm 400 700
E: Lower jaw width mm 510 900
L: Length mm 1250 2270
H: Height mm 1990 1870
W: Width mm 580 1100
Required oil flow ltr./min Approx. 500 (2-pump merging)
Required oil pressure kg/cm2 325 350
X point ton 74 90
Crushing force
Y point ton 105 130
Performance
Mouth speed Opening sec Approx. 2.9* Approx. 3.0*
(2-pump merging) Closing sec Approx. 3.1* Approx. 3.2*
* The performance specified above applies when installed PC200-6 or PC300-6.
Performance depends on the installed model and the hydraulic piping system.
Notes: (1) Please contact with your KOMATSU distributors about the details of local modification, since base machine
modification are required to install attachments.
(2) These attachments are also applicable to -5 models.
13A-10
Attachment Features and Specifications DEMOLITION
Concrete Jumbo Crusher
Free-rotation system type attachment with swing brake enables accurate positioning on the
structure being demolished.
Two crushing claws are actuated with two hydraulic cylinders, respectively. So the crusher can
catch at the center of the target to be crushed, without giving any excessive force to the boom and
arm.
The cylinder rods are provided with cylinder covers.
Model
Item JCJC1500 JCJC1500R JCJC2300
PC300-6 PC350-6 PC400-6 PC450-6 PC1000-1
PC300LC-6 MIGHTY PC400LC-6 MIGHTY
Applicable base machine PC350LC-6 PC450LC-6
MIGHTY MIGHTY
Work- a: mm 11255 11205 12085 12115 15170
ing b: mm 11945 11920 12855 12865 16490
range c: mm 8220 8220 8685 8685 7820
Weight: kg 3900 4050 11000
A: Mouth opening mm 0~1500 0~2300
B: Width (fully opened) mm 2100 3300
Attach- C: Opening width(at center point) mm 1940
ment D: Depth of opening mm 560 1050
E: Overall length mm 2920 3085 4360
F: Overall height mm 1750 3090
G: Overall width mm 850 1590
Crushing force (at P point) ton 180 282
(at hyd. pressure 350 kg/cm2) (at hyd. pressure 320 kg/cm2)
Mouth speed Opening sec 4.7 3.7 Approx. 6.0
Perfor- (2-pump merging) Closing sec 5.9 4.6 Approx. 8.0
mance Required oil pressure kg/cm2 320 (350 acceptable) 320
Required oil flow ltr./min 500 600 1000
Rotation mechanism 360 free rotation Hydraulic rotation 360 free rotation
(Brake with clutch plate) (Brake with clutch plate)
Notes: (1) JCJC2300 can be attached to PC650-5 or PC710-5 by combining a short arm (2.87m) and a special short boom.
(2) Please contact with your KOMATSU distributors about the details of local modification, since base machine
modifications are required to install attachments.
13A-11
Attachment Features and Specifications DEMOLITION
Hydraulic Hi-punch
Most suitable for dismantling scrapped ships and scrap-handling steel plate structure.
It cuts steel plate to square pieces (300 mm 800 mm) suitable for recycling. This size of scrap can
be put into an electric furnace without any further processing.
Since no access to a danger zone nor gas-cutting work is required, the work is highly safe and
prevents fires.
Arm-top mounting maximizes reach and its rotating mechanism allows any desired postures to
raise working efficiency significantly.
Two types of rotating mechanism, free and hydraulic rotation, are available.
Four edges can be used by reversing the blade, which cuts down operating cost (except blades at
the tip of the upper and lower jaws).
Maximum punch-able plate thickness is 16mm (at hydraulic pressure; 350kg/cm2).
Model
JHHP300 JHHP300R
Item
Applicable base machine PC300-6
PC300LC-6
a: Max. working reach mm 12030 12195
Working b: Max. working height mm 11345 11510
range c: Max. dumping height mm 6145 5980
d: Wrist radius mm 2595 2760
Weight: kg 3980 4130
A: mm 2700 2865
B: mm 650
Attachment
C: mm 300
D: mm 850
Cutter length mm 900
Required oil flow ltr./min 500 (2-pump merging)
Required oil pressure kg/cm2 350
Shearing force (at center of cutter) ton 190
Mouth speed Opening sec 3.0
Performance
Closing sec 3.7
Rotation Type Free rotation Hydraulic rotation
mechanism Required oil flow ltr./min Not necessary 20 for 40 rpm
Required oil pressure kg/cm2 Not necessary 200 ~ 250
Notes: Please contact with your KOMATSU distributors about the details of local modification, since base machine modifications
are required to install attachments.
13A-12
Attachment Features and Specifications DEMOLITION
Power Fork II
Extremely Easy to mounting/dismounting
It is possible to use without removing excavator's bucket links. Moreover, it is possible to mount/dismount
the same way as bucket thanks to employment of pin with roller (new mechanism).
Drastically increased grapple force
By employment of new mechanism, strong power transferred directly, and grapple force is drastically
increased.
Realized lightweight
By employment of simple structure and use of special steel, lightweight is further realized, enabling
grappling of much heavier material.
Easy transportation
It is possible to fold fork without removing pins, enables transportation posture as equipped bucket.
Tough and steady
Upper fork, lower fork and bracket are made with high-tensile steel, and high load applied pins are treated
induction heat-treatment.
Applicable base machine PC02 PC12R PC20R PC27R~ PC40R PC60 PC100 PC200
PC45R
PC03 PC15R PC25R PC35R PC50UU PC75UU PC120 PC220
Base machine bucket capacity m3 0.01 ~ 0.04 ~ 0.066 ~ 0.08 ~ 0.14 ~ 0.28 0.44 ~ 0.08 ~
0.02 0.044 0.08 0.11 0.16 0.5 1.0
A : Opening width mm 550 775 775 1040 1220 1505 1815 2080
B : Fork length mm 335 470 470 605 720 890 1010 1155
C : Fork width mm 190 240 240 300 350 405 545 700
D : Overall length mm 575 705 760 975 1140 1410 1645 1880
Weight kg 20 50 55 100 160 300 410 770
13A-13
Attachment Features and Specifications DEMOLITION
Rotary Grab
Has 360 continuous rotating mechanism at the joint portions for the arm able to grasp the
objects at various angles suitable for work in restricted job sites.
Can grasp objects more easily than similar devices which do not have 360 continuous rotating
mechanism and tilting mechanism
Operator can get increased productivity with minimal fatigue.
Through 360continuous rotation, it is easy to position the machine in relation to the object being
demolished and to work without moving the main body.
Work can be done at the highest efficiency, whether in the vertical, horizontal or inclined
directions.
Outstanding grasping force and lifting capacity.
Easy compaction of loose and hollow scraps.
Model JRGG05
Item JRGG10-2 JRGG20-2
Applicable base machine PC60-7 PC100-6 PC120-6 PC200-6 PC200LC PC220-6 PC220LC
a: mm 6590 8510 9160 10720 11120
b: mm 2320 4440 4000 6180 6240
Base Working range c: mm 4790 4280 4960 5470 5720
machine
d: mm 7290 8480 9470 10390 10630
e: mm 5280 6800 7390 8810 9010
Weight of attachment kg 420 1000 1500
Required oil flow ltr./min Approx. Approx. 50 Approx. 50
(Cylinder) 40
Required oil pressure kg/cm2
(Cylinder) 175 250 250
Required oil flow ltr./min Approx. Approx.25 Approx.25
(Motor) 18
Grasping force of claws kg 1000 2500 4000
Attachment Rotation mechanism 360 hydraulic rotation
*Lifting capacity (OVER SIDE)kg 380 700 800 1300 1500 2000 2300
/length of "e" on ground
A: Maximum opening mm 1120 1860 2360
B: Minimum opening mm 140 150 190
C: Overall height mm 1300 2025 2410
D: Overall height of claws mm 600 910 1140
E: Overall width of claws mm 600 600 700
Notes: Lifting capacity ratings are based on SAE standard J1097. Rated load not exceed 87% of hydraulic lifting capacity or
75% of tipping capacity.
For the shape of claws you may require, contact your Komatsu distributor.
13A-14
SECTION 13B
ROAD MAINTENANCE
EQUIPMENT
CONTENTS
Komatsu's recommendation ................................. 13B-2
Road subgrade recycling method ........................ 13B-2
Asphalt-pavement profiling method ..................... 13B-3
Road maintenance equipment .............................. 13B-4
Wheel stabilizer ...................................................... 13B-5
Crawler stabilizers ................................................. 13B-6
Road cutters ........................................................... 13B-8
Stone crusher ......................................................... 13B-9
13B-1
Komatsu Recommendation ROAD MAINTENANCE
EQUIPMENT
13B-2
Komatsu Recommendation ROAD MAINTENANCE
EQUIPMENT
13B-3
Road Maintenance ROAD MAINTENANCE
Equipment EQUIPMENT
1. Wheel stabilizer
The GS360 Wheel Stabilizer is recommended for harder ground or road subbase improvement work that
has been made either by hydraulic excavators or by brute force. The max. digging depth is 400 mm
(15.7'').
2. Lime spreader
In conventional operations, lime or other soil stabilizing agents or soil improvement are spread over the
ground manually or through the use of hydraulic excavators.
3. Crawler stabilizer
This is Komatsu's efficient alternative to conventional road subbase rehabilitation/improvement methods,
especially where the ground is soft, owing to the use of hydraulic exacavators or intensive, physical labor.
A single passage of the crawler stabilizer effectively crumbles old pavements; a stabilizing agent is mixed,
and the crushed materials are then used as the subbase material for the new pavement. Two digging
depths are available. The CS360SD can dig down to 1.2 meters (3'11''), the CS360 down to 0.7 meters
(2'4''), and the CS210 down to 0.6 meters (2').
4. Road cutters
Usually, uneven road surfaces and ruts are removed by road cutters. In this case, the dirt is removed
manually.
Komatsu's GC380F, which comes with a feeder, effectively scrapes jutting road surfaces and
automatically loads the waste into a dump truck. Another advantage is that a single operator of less
experience can control this machine with the equal skill of two veteran operators.
5. Motor Graders
Komatsu provides an excellent range of motor graders in various sizes depending on specific grading
requirements.
6. Vibratory rollers
Komatsu also offers a wide range of vibratory rollers in various configurations depending on specific
compaction requirements .
13B-4
Wheel Stabilizer ROAD MAINTENANCE
GS360-2 EQUIPMENT
The GS360 Wheel Stabilizer is designed for rehabilitation of old, damaged roads and
for soil Improvement tasks in farmland or around housing developments. When it
comes to reducing working time and costs, the GS360 is the answer for any type of
road / soil subbed rehabilitation.
Exceptional productivity:
The powerful digging force easily breaks down asphalt pavements up to 150 mm
(5.9") thick, and digs down to 400 mm (15.7") to perform simultaneous crumbling and
mixing operations. The optional rotor enables digging / mixing operation even down
to a depth of 700 mm (2'4").
Uniform crumbling and mixing:
Rotor tilting operation is possible due to the left-right individual control of the rotor lift.
The up-cut method and effect of the secondary crusher make granule / subbase soil
mixing work very efficient.
Rotor offset of 285 mm (11.2") to the left and right beyond the
outer edge of the tires
Stable rotor operation:
The tandem drive wheels and central placement of the rotor assure that, even on
rough and tough roads, there is very little vertical movement of the rotor, and traction
remains powerful, securing constant cutting depth.
GS360-2
Digging width mm (ft.in) 1975 (6'6")
Max. digging depth mm (in) 400 (15.7')
Engine output HP (kW) 355 (265)
Operating weight kg (lb) 18200 (40,120)
Rotor shift distance (LH & RH both) mm (ft.in) 500 (1'8")
Overhang distance (LH & RH both) mm (in) 295 (11.8")
PERFORMANCE
Travel speed km/h (MPH) 0-25 (15.5)
Working speed m/min (MPH) 0-50 (1.9)
Max. drawbar pull kg (lb) 9480 (20,900)
ENGINE
Model Komatsu S6D140
Type Direct injection,turbocharged
No. of cylinders-bore stroke mm (in) 6-140 165 (5.51 6.50)
Flywheel horsepower HP (kW) 355 (265)
ROTOR EQUIPMENT
Drive method Hydrostatic
Rotor speed rpm 0-132
No. of cutting bits 52
REFILLING CAPACITY
Fuel ltr. (U.S. Gal) 500 (132.1)
Hydraulic oil ltr. (U.S. Gal) 300 (79.3)
ATTACHMENTS AND OPTIONAL EQUIPMENT
Steel cab Tool kit
Canopy Wide tire 17.5-25-12PR (G-2)
Working equipment
Road planer
Digging depth 500m (19.7") rotor for FRB
Digging depth 600 mm ~ 700 mm (23.6" ~ 27.6")
rotor for soil stabilizing
Soft rock crusher
(Drum type rotor and conical bits are used )
13B-5
Crawler Stabilizer ROAD MAINTENANCE
CS210-1, CS360-2 EQUIPMENT
Features
Komatsu's sophisticated crawler stabilizer crumbles old pavements and mixes the resulting splinters with
lime or other stabilizing agent, simultaneously. When it comes to road rehabilitation or soil improvement work,
it is truly a paragon of efficiency. High traveling stability is assured by superb machine weight balance and
crawlers equipped with swamp shoes. This enables the machine to operate even on soft terrain, ensuring
constant digging / mixing depth.
Great productivity:
The high-power Komatsu diesel engine provides a massive output
of 355 HP (265 kW) for CS360 and 203 HP (154 kW) for CS210
and a large torque, making it easy to perform mixing operations at a
high working speed.
High mixing performance:
Powerful up-cut method, ideal bit alignment and the optimal rotor
speed are combined to provide exceptional mixing performance.
Komatsu's original secondary crushing mechanism enables the
machine to demonstrate high mixing performance even when
working in clayey soil conditions.
Large digging depth:
The CS360 with the standard stabilizer can dig down to 700 mm (2'4").
The CS210 can dig down to 600 mm (23.6"). The CS360SD with the special deep stabilizer can dig down to
1200 mm (3'11")
Wide rotor offset:
The CS360 offset mechanism makes it possible to extend the rotor 170 mm (6.7") beyond the outer edge of
the left track. The CS210 offset mechanism makes it possible to extend the rotor 140 mm (5.5") beyond the
outer edge of the track. The CS360SD offset mechanism makes it possible to extend the rotor 140 mm (5.5")
beyond the outer edge of the track.
13B-6
Crawler Stabilizer ROAD MAINTENANCE
CS210-1, CS360-2 EQUIPMENT
CS210-1
CS360-2
CS210-1 CS360-2
Max. mixture depth mm (ft.in) 600 (2') 700 (2'4")
Digging width mm (ft.in) 1600 (5'3"), *1800 (5'11") 2000 (6'7")
Engine output HP (kW) 203 (152) 355 (265)
16110 (35,520),
Operating weight kg (lb) 24400 (53,790)
*16305 (35,950)
Rotor shift distance (LH & RH both) mm (ft.in) 515 (1'8"),*415 (1'4") 500 (1'8")
Overhang distance (LH) mm (in) 140 (5.5) 170 (6.7")
Ground pressure kg/cm2 (PSI) 0.53 (7.5), *0.54 (7.7) 0.38 (5.40)
DIMENSIONS
Overall length overall width 7500 2350 2630 9500 2980 3640
mm (ft.in)
overall height (24'7" 7'9" 8'8") (31'2" 9'9" 11'11")
Length of track on ground mm (ft.in) 2750 (9') 3840 (11'11")
Shoe width mm (in) 500 (20) 860 (34')
Ground clearance mm (ft.in) 330 (1'1") 540 (1'9")
PERFORMANCE
Travel speed km/h (MPH) 0-3.1 (1.9) 0-3.2 (2.0)
Working speed m/min (MPH) 0-10 (0.4) 0-10 (0.4)
Max. drawbar pull kg (lb) 10100 (22,270) 12000 (26,455)
Gradeability deg 20 20
ENGINE
Model Komatsu S6D125E Komatsu SA6D140E
Type Direct injection, turbocharged Direct injection, turbocharged
No. of cylinders-bore stroke mm (in) 6-125 150 (4.92 5.91) 6-140 165 (5.51 6.50)
Flywheel horsepower HP (kW) 203 (152) 355 (265)
ROTOR EQUIPMENT
Drive method Hydrostatic Hydrostatic
Rotor speed rpm 0-143 0-130
No. of cutting bits 52, *56 60
REFILLING CAPACITY
Fuel ltr. (U.S. Gal) 300 (186) 500 (132.1)
Hydraulic oil ltr. (U.S. Gal) 115 (71) 300 (79.3)
CS360-2 ATTACHMENTS AND OPTIONAL EQUIPMENT
Steel cab
700 mm (27.6") triple grouser shoes
860 mm (34") swamp shoes
13B-7
Road Cutter ROAD MAINTENANCE
GC380F-2 EQUIPMENT
Features
Thanks to the Komatsu GC380F and GC50 Road Cutters, maintaining asphalt pavements with undulating or
rutted surfaces is now easier, more precise, more productive, and cost efficient. The GC380F Road Cutter
alone effectively cuts the road surface. The areas around manholes and other obstacles, where the GC380F
cannot cut, is expertly handled by the compact GC50 Road Cutter which is equipped with articulation frames.
Superior working ability:
The Komatsu SA6D140 engine produces great power which provides exceptional cutting ability down to 150
mm (5.9''). It shortens work periods and reduces costs.
Long rotor sideshift:
The rotor provides a great cutting width of 2070 mm (6'10'') and can be side-shifted (450 mm or 1'6'' to the left
and right) very close to curbstones . This eliminates the need for manual cutting.
Automatic cutting control (ACC):
Enables the adjustment of digging depth in increments of a millimeter, as well as assuring precise cutting to
the determined depth.
All controls in the hands of a single operator:
The comprehensive control panel is installed on the left and right sides of GC380F, respectively. All machine
operations, including steering, can be controlled by a single operator.
Low-noise operation:
Closed engine hood and suction-type radiator fan help reduce operating noise, making the machine ideal for
urban road maintenance work.
Specifications
GC380F-2
OPERATING WEIGHT kg (lb) 28960 (63850)
On front wheel kg (lb) 11400 (25130)
On rear wheel kg (lb) 17560 (38710)
PERFORMANCE
Travel speed F and R 1st km/h (MPH) 0 ~ 4.8
F and R 2nd km/h (MPH) 0-26.0 (16.2)
Working speed m/min (MPH) 30 (1.1)
Max. rimpull kg (lb) 14048 (30970)
Min turning radius m (ft.in) 12 (39'4")
Tire size 14.00-24-16PR
ENGINE
Model Komatsu SA6D140
Flywheel horsepower HP (kW)/rpm 488 (364)/2000
Piston displacement ltr. (cu.in) 15.24 (928)
WORK EQUIPMENT
Drive method Hydrostatic
Rotor side shift distance mm (ft.in) 450 (1'6")
Cutting depth mm (in) 150 (5.91)
Accuracy of cutting depth mm (in) 2 (0.079)
Cutting width mm (ft.in) 2070 (6'10")
REFILLING CAPACITY
Fuel ltr. (U.S. Gal) 700 (185)
Hydraulic oil ltr. (U.S. Gal) 243 (64)
Sprinkler tank ltr (US qal) 2000 (528)
13B-8
Stone Crusher ROAD MAINTENANCE
CS210-1 EQUIPMENT
Features
The splintered stones are laid in such a way that finer granules are gathered in the upper layer with larger
gravel remaining in the lower layer; this produces the ideal sub-bed configuration.
]
Conical bit
Rebound plate
Splintering plate
Selection plate
The substantial working depth of 315 mm (12.4") reduces the burden on machines at the next processes.
High splintering performance: 90 - 95% by weight of splintered stones are less than 30 mm (1.2") in
diameter.
Specifications
CS210-1
Operating weight kg (lb) *17960 (39,590)
Flywheel horsepower HP (kW) 203 (152)
Travel speed km/h (MPH) 0~3.1 (1.93)
Working speed m (ft)/min 0~10.0 (32.8)
Working width mm (ft.in) 2060 (6'9")
Working depth mm (in) 315 (12.4")
Ground pressure kg/cm2 (PSI) 0.39 (5.5)
Overall length mm (ft.in) 7600 (24'11")
Overall width mm (ft.in) 2450 (8')
Overall height (to top of cab) mm (ft.in) 2630 (8'8")
Engine model Komatsu S6D125E
Type of stone crusher Rotary drum type
Number of bits Conical bits: 106, Roof bits: 10
Rotor speed rpm 0 ~ 127
Rotor width mm (ft.in) 2000 (6'9")
Rotor diameter mm (ft.in) 1072 (3'6")
Transmission type Hydrostatic drive
* With cab and 750 mm (30") triple grouser shoes.
13B-9
MEMO
SECTION 13C
TRIMMING DOZERS
CONTENTS
Trimming operation in vessel ............................... 13C-2
Design features ...................................................... 13C-3
Standard equipment .............................................. 13C-5
Track shoe selection .............................................. 13C-6
Specifications ......................................................... 13C-7
13C-1
Trimming Operation TRIMMING DOZERS
in Vessel
Unloading clamshell buckets and pneumatic unloader have been conventionally used to unload bulk cargoes
(grain, salt, sugar, coal, ore fertilizer, chips, etc.) from vessels.
However, the bucket scooping amount of unloading materials or suction decreases when the unloading work
progresses, resulting in a corresponding deterioration of unloading efficiency.
This reduced efficiency means that vessels must remain longer in port, leading to a direct lowering of vessel
operating efficiency and a substantial increase in port charges. Consequently, it has become necessary to
find an effective method to facilitate bulk unloading. The conventional method is bulk cargoes were raked
manually has been replaced by the bulldozer, and a trimming dozer has now been developed specifically for
the handling of bulk cargoes in vessels.
Wheel loaders have often been employed at the final stages of unloading to protect the bottom of the vessel
hold, however these have been replaced quite recently by trimming dozers equipped with rubber crawler.
13C-2
Design Features TRIMMING DOZERS
3
4
d c 2
2
5
13C-3
Design Features TRIMMING DOZERS
The trimming dozers destined for in-vessel cargo work are selected so as that other cargo handling
unloaders and derricks may function with good efficiency.
When selection is made on the models of trimming dozer, the structure of holds (hatch size, existence of twin
deck, frame conditions, etc.), capacity of unloader (lifting capacity and cargo volume),and cargo material to
be handled must be taken into consideration.
13C-4
Standard Equipment TRIMMING DOZERS
Standard Equipment
D65EEX-12 D85A-21
Air cleaner inner element, no-woven cloth made
Air cleaner inner element, urethane made
Alternator, corrosion proof type
Backup buzzer
Backup lamp, red color
Electric terminals, silicon compound coated
Engine side covers, perforated
Engine under guard, hinged type
Exhaust pipe, short
Fan, high speed
Front lights, additional
Fuel tank, large capacity
Hydraulic cylinder rod, thick chrome plated
Intake manifold, cast iron made
Oil pan, dual-bottom
Oil pan, stainless steel made
Radiator core protective grid
Radiator mask, hinged type
Radiator, corrosion proof type
Rear protector
Recoil spring, sealed type
Shoe, holed single grouser
Shoe, holed triple grouser
Starting motor, corrosion proof type
Tachometer with mechanical drive service meter
Track adjusting cylinders, thick chrome plated
Transmission oil cooler, tiltable
Wear resistant pulley
13C-5
Track Shoe Selection TRIMMING DOZERS
FVBH0241
SINGLE GROUSER SHOE HOLED SINGLE GROUSER SHOE HOLED TRIPLE GROUSER SHOE SWAMP SHOE
A B C D
0.5 kg/cm2
Salt (7.1 PSI) ( ) ( ) ( ) ( ) ( ) ( )
0.5 kg/cm2
Sugar
(7.1 PSI)
0.3 kg/cm2
Grain (4.3 PSI)
0.3 kg/cm2
Fertilizer
(4.3 PSI)
Note 1 : : Currently available shoes which can be used. ( means standard shoes.)
Note 2 : ( ) : Ground pressures are greater than the target values but have been used so far.
13C-6
Specifications TRIMMING DOZERS
I H
C
E
G.L
G D
F
B
Model
D21A-7 D21P-7 D31E-20 D31P-20
Item
OPERATING WEIGHT* kg (lb) 4070 (8,970) 4430 (9,770) 7000 (15,430) 7660 (16,890)
FLYWHEEL HORSEPOWER HP (kW)/RPM 49 (36.8)/2450 49 (36.8)/2450 70 (52)/2350 70 (52)/2350
PERFORMANCE:
Travel speed
Forward 1st 2.3 (1.4) 2.3 (1.4) 2.2 (1.4) 2.2 (1.4)
2nd 4.1 (2.5) 4.1 (2.5) 3.9 (2.4) 3.9 (2.4)
km/h (MPH)
3rd 6.8 (4.2) 6.8 (4.2) 6.5 (4.0) 6.5 (4.0)
Reverse 1st 2.5 (1.6) 2.5 (1.6) 2.4 (1.5) 2.4 (1.5)
2nd 4.5 (2.8) 4.5 (2.8) 4.3 (2.7) 4.3 (2.7)
3rd 7.4 (4.6) 7.4 (4.6) 7.1 (4.4) 7.1 (4.4)
DIMENSION*
A Overall length mm (ft.in) 3835 (12'8") 3845 (12'7") 4510 (14'10") 4690 (15'5")
B Overall width mm (ft.in) 2050 (6'9") 2500 (8'2") 2480 (8'2") 2780 (9'1")
C Overall height mm (ft.in) 1785 (5'10") 1810 (5'11") 1955 (6'5") 2045 (6'9")
D Length of track on ground mm (ft.in) 1820 (6') 1820 (6') 1880 (6'2") 2185 (7'2")
Ground pressure kg/cm2 (P.S.I) 0.37 (5.26) 0.24 (3.41) 0.47 (6.68) 0.29 (4.12)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 680 (1,500) 660 (1,460) 1380 (3,040) 1280 (2820)
Length mm (ft.in) 2050 (6'9") 2500 (8'2") 2480 (8'2") 2780 (9'1")
Height mm (ft.in) 610 (2') 610 (2') 750 (2'6") 750 (2'6")
Max. lift above ground mm (ft.in) 1480 (4'10") 1540 (5'1") 1480 (4'10") 1630 (5'4")
E Max. drop below ground mm (ft.in) 840 (2'9") 780 (2'7") 710 (2'4") 650 (2'2")
F Breast dimension mm (ft.in) 905 (3') 890 (2'11") 1200 (3'11") 1375 (4'6")
G Max. pitch adjustment
H Forward degree 38 38 38 37
I Reverse degree 26 26 24 26
Model
D41A-3 D53A-17 D65E-12 D65EX-12
Item
OPERATING WEIGHT* kg (lb) 10540 (23,240) 13460 (29,670) 19950 (43,980)** 20120 (44,360)
FLYWHEEL HORSEPOWER HP (kW)/RPM 92 (68)/2350 124 (93)/1900 180 (135)/1950 180 (135)/1950
PERFORMANCE:
Travel speed
Forward 1st 2.4 (1.5) 3.2 (2.0) 3.9 (2.4) 3.9 (2.4)
2nd km/h (MPH)
4.4 (2.7) 5.9 (3.7) 6.8 (4.2) 6.8 (4.2)
3rd 7.6 (4.7) 9.8 (6.1) 10.6 (6.6) 10.6 (6.6)
Reverse 1st 3.0 (1.9) 3.9 (2.4) 5.0 (3.1) 5.0 (3.1)
2nd 5.5 (3.4) 7.1 (4.4) 8.6 (5.3) 8.6 (5.3)
3rd 9.4 (5.8) 11.9 (7.4) 13.4 (8.3) 13.4 (8.3)
DIMENSION*
A Overall length mm (ft.in) 5120 (16'10") 5510 (18'1") 6475 (21'3") 6475 (21'3")
B Overall width mm (ft.in) 2620 (8'7") 2890 (9'6") 3210 (10'6") 3210 (10'6")
C Overall height mm (ft.in) 2005 (6'7") 2365 (7'9") 2990 (9'10")*** 2990 (9'10")***
D Length of track on ground mm (ft.in) 2060 (6'9") 2365 (7'9") 2675 (8'9") 2675 (8'9")
Ground pressure kg/cm2 (P.S.I) 0.64 (9.10) 0.62 (8.82) 0.73 (10.38) 0.74 (10.52)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 1430 (3,150) 1800 (3,970) 4330 (9,550) 4330 (9,550)
Length mm (ft.in) 2620 (8'7") 2890 (9'6") 3210 (10'6") 3210 (10'6")
Height mm (ft.in) 850 (2'9") 930 (3'1") 1000 (3'3") 1000 (3'3")
Max. lift above ground mm (ft.in) 1435 (4'8") 1690 (5'7") 1610 (5'3") 1610 (5'3")
E Max. drop below ground mm (ft.in) 670 (9'6") 730 (2'5") 685 (2'3") 685 (2'3")
F Breast dimension mm (ft.in) 1540 (5'1") 1785 (5'10") 1610 (5'3") 1610 (5'3")
G Max. pitch adjustment
H Forward degree 38 50 29 29
I Reverse degree 25 25 22 22
* : Including dozer equipment in addition to bare tractor
** : Including cab and air conditioner
*** : To top of cab
13C-7
Specifications TRIMMING DOZERS
Model
D85A-21
Item
OPERATING WEIGHT* kg (lb) 24500 (54,010)
FLYWHEEL HORSEPOWER HP (kW)/RPM 225 (168)/2000
PERFORMANCE:
Travel speed
Forward 1st 3.5 (2.2)
2nd 6.5 (4.0)
km/h (MPH)
3rd 10.7 (6.6)
Reverse 1st 4.7 (2.9)
2nd 8.3 (5.2)
3rd 13.3 (8.3)
DIMENSION*
A Overall length mm (ft.in) 6420 (21'1")
B Overall width mm (ft.in) 3410 (11'2")
C Overall height mm (ft.in) 3090 (10'2")
D Length of track on ground mm (ft.in) 2730 (8'11")
Ground pressure kg/cm2 (P.S.I) 0.80 (11.38)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 4440 (9,790)
Length mm (ft.in) 3410 (11'2")
Height mm (ft.in) 1185 (3'11")
Max. lift above ground mm (ft.in) 1730 (5'8")
E Max. drop below ground mm (ft.in) 740 (2'5")
F Breast dimension mm (ft.in) 1580 (5'2")
G Max. pitch adjustment
H Forward degree 27
I Reverse degree 24
13C-8
SECTION 13D
RAILWAY MAINTENANCE
MACHINES
CONTENTS
Railway maintenance system ............................... 13D-2
Features .................................................................. 13D-2
Specifications ......................................................... 13D-3
Shipping dimensions ............................................. 13D-4
Working ranges, digging force ............................. 13D-5
13D-1
Railway Maintenance System RAILWAY MAINTENANCE
Features MACHINES
Railway maintenance works are extremely important for securing the safety of railway transportation - an
artery of society. Replacement of ballast in particular should be made for as long a distance as possible
within the limited time-frame available between the last train of the day and the first train of the following
morning. This ballast replacement work involves various problems including reduction of number of workers,
limitations in workload, difficulty in achieving planned work volume and increase of unit cost for work
execution. The Komatsu Super Liner series was developed with priority given to safety of railway operation,
and effectively meets these problems. Its features include the following.
Manual traversing (exit to outside of rail) can be made if any failure occurs.
Has no influence on the current signal system.
No danger of contacting overhead wires.
No derailment while traveling
No damage caused to equipment such as rails, sleepers and points.
Furthermore, since it can be transported to the work site by truck, the length of time required for arrival on-site
can be greatly reduced.
FEATURES
! Easy exit from the main line.
Should a failure occur in the engine or hydraulic system to disable traveling, it is possible to manually raise
the machine with jacks and move it to a nearby emergency station.
In addition, an auxiliary engine for emergency exit is optionally provided.
! Height automatic stop system
If maximum working height is set to a safe level, when the boom rises to this level during work, it will stop
automatically.
Therefore, there is no risk of contacting overhead wires.
! Insulation measures to prevent short-circuit faults.
Insulating measures adopted at the points-of-contact of machine with rails ensure that shorting between
right and left rails and interference with signals, etc., will not occur.
! Works and deadheading performed entirely on-rail.
All works are performed on the rails, thus ensuring that no damage will occur to ballast, signal boxes,
cables, etc.
! Quick traveling speed (on rails)
Large-diameter [380mm (15")] insulated traveling wheels are provided, allowing safe traveling over
junction points and substantially reducing travel time between sites.
! Easy rail access and exit
With rubber crawlers, access and exit to/from the rail line is easy, and causes no damage to rails.
! Two gauge types are available;
A machine dedicated to narrow gauge and one dedicated to both narrow and broad gauges.
13D-2
Specifications RAILWAY MAINTENANCE
MACHINES
13D-3
RAILWAY MAINTENANCE
Dimensions
MACHINES
PC58UUT-3
30(1.2")
132
730(2'5")
5(4 '5")
'4") 5(3
W.G:2354(7'9")
103
N.G:1980(6'6")
910(3')
)
'7"
1360(4'6")
80(3
W.G:1435(4'8") 10
400(16")
W.G:2754(9'0")
680(2'3")
90(3.5")
1980(6'6") 5680(18'8")
3825(12'7") 1035(3'5")
980(3'3")
2111(6'11")
2750(9')
25510") 629(2'1") 920(3')
884(2'11")
550(1'10")
525(1'9")
420(1'5")
200(7.9")
990(3'3") 1940(6'4")
N.G:1067(3'6") 1495(4'11") 1495(4'11")
2990(9'10")
N.G:2380(7'10")
PC78UUT-6
13D-4
Working Ranges RAILWAY MAINTENANCE
Digging Force MACHINES
*A
B
F
E
Bucket
Boom Arm Arm crowd
A mm B mm C mm D mm E mm F mm G mm digging
length length force
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) force
m(ft.in) m(ft.in) kg (lb/kN)
kg (lb/kN)
3.41 1.62 3325 2945 1630 4000 2900 5575 3270 4000 2650
PC58UUT-3
(11'2") (5'4") (10'11") (9'8") (5'4") (13'1") (9'6") (18'3") (10'9") (8820/39.2) (5840/26.0)
3.75 1.72 3815 2820 1345 3980 3110 6100 4030 6250 3960
PC78UUT-6
(12'4") (5'9") (12'6") (9'3") (4'5") (13'1") (10'2") (20'0") (13'3") (13780/61.3) (8740/38.8)
* Limited operating height
13D-5
MEMO
SECTION 13E
OTHERS
CONTENTS
Telescopic clamshell ............................................. 13E-2
Caisson specs (Electric powered excavator) ...... 13E-2
Underground demolition specs ............................ 13E-3
GEO master (Foundation excavating specs) ....... 13E-3
Super GEO (Extra low-height excavator) ............. 13E-4
Double arms (For reverse-side ditching) ............. 13E-4
Tilting cab ............................................................... 13E-5
High-mount cab ...................................................... 13E-6
Muddy soil excavating specs ............................... 13E-7
Tower yarder ........................................................... 13E-7
Aqua-digger (Backhoe type specs) ...................... 13E-8
13E-1
OTHERS
Telescopic Clamshell
This TELESCOPIC CLAMSHELL exhibits the best performance in deep pit bottom excavating works for a
multi-story building foundation or caisson. The combination of both a clamshell of maximum bucket capacity
and a telescopic arm of higher extension-retraction speed in this machine class greatly improve its working
efficiency.
PG15SVE
13E-2
OTHERS
<MAJOR FEATURES>
1. Hydraulic circuit for rotatory hydraulic crusher is equipped as standard.
2. A machine with extra-low height cab can travel under 2.5-meter beam in height.
3. Two-piece booms adopted on this machine realize pull-down operation of 3.5-meter wall in height and
provide a compact transport posture.
4. Dustproof net adopted on the side cover prevents the engine from getting dust intrusion into the engine
compartment even in dusty demolition job sites.
MODEL PC138US
OPERATING WEIGHT (kg) 15900
FLYWHEEL HORSEPOWER (kW(PS)/rpm) 64(87)/2200
REACH AT MAX.HEIGHT* (mm) 8715
WORKING MAX.WORKING REACH* (mm) 7735
RANGE MAX.REACH BELOW GROUND* (mm) 4060
REAR TAIL SWING RADIUS (mm) 1595
* With Crusher & Cutter (C & C17R)
PC35MR PC75UU
13E-3
OTHERS
PC60
PG75
Overall height
2480
1990
PG75
FVBH0253
4690 2380
1200 1990 1190
810
320
2130 700
2845 1750
2450
FVBH0254
FENCE
SIDE DITCH
MAIN PIPE
BRANCH PIPE
13E-4
OTHERS
Tilting Cab
This excavator-based machine can keep the operators compartment horizontal even on a sloped terrain with
a tilt device consisting of two control cylinders, thus ensuring efficient and comfortable logging operation in
forest or woods.
PC75UU
PC78US-5
13E-5
METAL RECYCLING WORKS OTHERS
High-mount Cab
There are two types of high-mount cab. One is a fixed type. Other is an elevating type.
A high-mount cab provides the operator with wider and clearer field view, thus facilitating loading or
unloading of scrap on or off a truck and charging or discharging into or out of scrap processing machines.
The hydraulic elevating cab lowered ensures better transportability.
Elevating Cab OUTLINE DRAWING
PC220LC
13E-6
MARINE-HARBOR WORKS OTHERS
FOREST INDUSTRIES
Tower Yarder
An excavator-based yarding machine with a winch, called TOWER YARDER, features an excellent
controllability and high mobility. It also ensures easy operation without requiring any sub-wire ropes and
skylines, thus enabling great improvement of job efficiency in timber yarding.
13E-7
MARINE-HARBOR WORKS OTHERS
PC1600
PC1000
APPLICABLE MODEL PC200~PC3000
(UNDERCARRIAGE-LESS TYPE IS ALSO AVAILABLE.)
13E-8
CONTENTS
INDEX
SECTION 14
ENGINES
CONTENTS
Features .....................................................................14-2
Specifications ............................................................14-3
Engine used in KOMATSU Machines ......................14-4
High Altitude Deterioration ......................................14-6
14-1
Features ENGINES
High quality:
The Komatsu diesel engine is a true achievement of our total engine production system-from casting all the
way through machining processes using Komatsu-made machine tools to the final steps of assembly.
Proven reliability
The Komatsu diesel engine is matched with our heavy-duty construction equipment to create a powerful
combination of unbeatable performance and high durability.
Economical operations:
The Direct injection system and special fuel-minimizing design of Komatsu diesel engines provide maximum
economy. Low lubricant consumption is also a remarkable advantage.
Compact design:
Advanced design and an efficient production system make Komatsu diesel engines compact and lightweight,
enhancing their versatility.
Low-noise operation:
Ideal designs keep engine noise and vibration to a minimum.
Wider applications:
A wide range of optional equipment offers a variety of applications to meet specific customer requirements.
Low emission engine:
Komatsu engine meets the emission regulations of North America, Europe, Japan, etc. by employing the
advanced technologies. The followings are examples of the technologies.
High-pressure injection system
Fuel is sprayed more finely to prevent increase of NOx and particulate matter by heightening the fuel
pressure injected into the cylinder.
Air-cooled aftercooler
Intake air temprature pressurized by the turbocharger is lowered largely by the air-cooled aftercooler
having high cooling capacity to prevent increase of NOx caused by high combustion temperature and
increase the intake air density for less fuel consumption.
Optimized shape of combustion chamber by use of FCD piston
The shape of the combustion chamber is optimized by employing an FCD piston having high strength and
the air flow speed is heightened by improving the shape of the air intake passage. With these
technologies, particulate matter is reduced.
Air-cooled aftercooler
High-pressure fuel
injection pump
Fuel accelerating
FCD piston
Optimize swirling
of intake air
14-2
Specifications ENGINES
14-3
Engines used in KOMATSU ENGINES
Machines by Engine Model
14-4
Engines used in KOMATSU ENGINES
Machines by Engine Model
14-5
High Altitude Deterioration ENGINES
NOTE: (1) The percentages listed above are for standard machines.
(2) These values at each altitude range indicate the percentage of the horsepower obtained at the
sea level after fuel re-adjustment against rated flywheel horsepower.
100 percent means that no fuel re-adjustment is required.
(3)*: With automatic altitude deration.
(4)**: UK source
14-6
High Altitude Deterioration ENGINES
NOTE: (1) The percentages listed above are for standard machines.
(2) These values at each altitude range indicate the percentage of the horsepower obtained at the
sea level after fuel re-adjustment against rated flywheel horsepower.
100 percent means that no fuel re-adjustment is required.
(3) *: With automatic altitude deration.
14-7
MEMO
CONTENTS
INDEX
SECTION 15
TIRES
CONTENTS
Tire classifications ....................................................15-2
Tire manufacturer's designation ..............................15-3
Tire designation:
Tire size designation ............................................15-5
Structure and function of tire ..............................15-5
Comparison of bias and radial tires ...................15-8
Tire selection .............................................................15-8
15-1
Tire Classifications TIRES
15-2
Tire Manufacturer's TIRES
Designation
15-3
Tire Manufacturer's TIRES
Designation
15-4
Tire Designation TIRES
Nowadays the ply rating shows the strength of the tire; it no longer shows the number of layers of cord
cloth. Originally the term "ply" did in fact refer to the number of layers of cord cloth, and was therefore an
indication of the tire strength. But with the development of new materials, the original cotton cord cloth
changed first to rayon and has now been replaced by nylon or steel wire.
This has made it possible to greatly increase the strength without increasing the number of layers of
material. Consequently the term "ply rating" has come to be used to indicate the strength of the tire rather
than to express the actual number of plies.
Stars (*,**,***) are used to indicate the strength of radial tires.
b) Breaker
Extra layers of rubber-coated cord are placed
between the outer plies and the tread. They
prevent cuts reaching the ply cords through tread,
and absorb shocks.
c) Plies
A tire is composed of several layers of plies,
coated on both sides by a rubber compound.
These maintain inflation pressure of the tires
supporting load. These plies are made of high
tensile nylon cord.
The term "Ply Rating", according to the Tire and Rim Association (TRA), is defined as follows:
"A given tire with its maximum recommended load when used in specific type service. It is an index of tire
strength and does not necessarily represent the number of cord plies in the tire."
d) Inner liner
The inner liner is a rubber layer covering the inside from bead to bead of a tubeless tire, corresponding to
the tube of an ordinary tube tire. It prevents the loss of inflation pressure of the tire.
15-5
Tire Designation TIRES
e) Beads
Beads are the parts which fix the tire to the rim. All plies are tied into bundles of steel wire. The beads fit on
the rim perfectly, preventing the tire from slipping out of the rim contour while the vehicle is in motion.
g) Side-walls
Side-walls are covers made of a flexible rubber compound to protect the sides of the tire. Side-walls are
designed to cushion the plies from shocks and cuts, and to flex and bend without cracking, under ordinary
usage.
15-6
Tire Designation TIRES
15-7
Tire Selection TIRES
15-8
Tire Selection TIRES
Increase in size
Inflation pressure
TKPH
(Heat resistance)
Depth of groove
Tread rubber
Speed Structure
Inflation pressure
Flotation
Wide base tire
Tire chain
Cost
(economy)
2. Tread pattern
The tread pattern can be divided broadly into the type in Fig. 1, which has no circumferential groove in the
tread center, the type in Fig. 2, which has transversal grooves, and the type in Fig. 3, which has a block
pattern. Generally speaking, the first type provides excellent resistance to cutting and wear, while the
second type provides excellent traction on slippery surfaces. The block pattern is typical of radial tires
giving good all round performance.
15-9
Tire Selection TIRES
3. TMPH
The primary task of heavy-duty tires is to haul heavy loads faster and over longer distances. This heavy
load hauling inevitably results in heat built-up inside the tires, and tires have limitation of temperature.
If this limitation is reached, deterioration of the tire will begin at an early stage of operation. Accordingly, it
is necessary when selecting tires, to determine the amount of work will keep the tire within a safe range to
avoid over-heating when a vehicle is operated under given conditions.
The amount of work done under the given conditions and within a safe range is shown as the "TON-MILE-
PER-HOUR" which can be determined by the following formula:
Average tire load = 1/2 (tire load when vehicle carries no load + tire load when vehicle is loaded)
round trip distance number of job cycles per day
Average speed =
total hours of operation per day
4. Tire characteristics
The optimum tires should be selected for their applicable operation or job and terrain conditions depending
on the cutting (wear) resistance and heat resistance. These resistant qualities are indicated as follows:
15-10
Tire Selection TIRES
Because of the structure and quality of the rubber used for the tread, cut resistance and wear resistances
are mutually opposite to heat resistance, so when selecting tires, always check the TKPH.
Depending on the tire, super heat-resistant (SHR) and super cut-resistant (SCR) tread rubber are
available, so ask your tire distributor for details of tires that are not listed in the operation manual.
Radial Travelability
Suitable
tire (traction, flotation)
Bias Riding comfort
Initial
cost
Cost
Operating
cost
6. Correct Usage
1) Load on tire
If the tire is used with a load that exceeds the limit
for the tire, there will be excessive deformation of
the tire and generation of heat, and this may lead
to various types of damage.
Always keep to the load specified for the
machine, and ensure that there is no overload.
15-11
Tire Selection TIRES
7. Tire life
See page 17-15.
15-12
CONTENTS
INDEX
SECTION 16
SPECIAL APPLICATION
RECOMMENDATION
CONTENTS
Introduction ...............................................................16-2
Recommendation for low grade fuel usage ............16-3
Recommendation for sandy and
dusty terrain condition ......................................16-4
Recommendation for high altitude ..........................16-5
Recommendation for cold and
extremely cold weather area .............................16-7
Tropical weather specification .................................16-8
16-1
Introduction SPECIAL APPLICATION
RECOMMENDATION
KOMATSU products are designed to meet various application requirements in a wide range of natural
environment and social situations on the globe. For operation under extremely severe environmental
conditions, where the mere standard spec is inadequate, KOMATSU offer a variety of options for special
application to be added to or substituted for the standard spec so as to reach the full potential of the machine
even in such conditions.
In this chapter, why such special care is necessary and what are in the special spec are explained with
typical examples.
It is recommended to consult KOMATSU through the distributor for actual choice of a spec for such special
application.
North Pole
(4)
(2) (3)
16-2
(1) Recommendation for SPECIAL APPLICATION
Low Grade Fuel Usage RECOMMENDATION
The quality of fuel depends on the districts and fuel suppliers. In addition, if the fuel is stored under bad
condition, its quality may be lowered.
1) Dirt
Since dirt in the fuel clogs the filter quickly, it can lower the engine power. In addition, it can lower
circulation of the fuel and wear the internal parts of the injection pump quickly. To solve this problem, a
filter of finer mesh should be used or the number of filters should be increased.
(Additional fuel filter for low grade fuel)
Fuel tank
Feed Injection
pump pump
Komatsu Engine P
Larger capacity
main filter
Fuel tank Return
PT pump
Cummins
Engine P
2) Water
Water in fuel rusts the fuel piping. In addition, it lowers lubrication performance, and that wear the sliding
parts of the injector, injection pump, etc. To solve this problem, a water separator should be installed.
Water Separator
Point: Fuel-water separator to be installed when there are water
contamination (>0.1%) risks due to poor fuel storage or
environmental factor
Types of Fuel Pump Installation Positions
Fuel tank
Feed pump
To injection
Injection pump pump
(Komatsu Engine) Filter
Fuel tank
PT pump To PT
(Cummins Engine) pump
Water separator
3) Sulfur
If fuel contains sulfur, sulfuric acid is produced and it accelerates internal corrosion. If it is obliged to use
fuel containing sulfur by 0.5% or more, use high TBN (Total Base Number) oil.
If fuel containing sulfur is used, the oil is deteriorated quickly and it should be replaced at shorter intervals.
For detail, see MAINTENANCE in the Operation & Maintenance manual.
16-3
(2) Recommendation for Sandy and SPECIAL APPLICATION
Dusty Terrain Condition RECOMMENDATION
This specification should be applied to not only sandy terrain but also dusty terrain. It is essential when the
view range is 0 meter.
2) Cyclone-type pre-cleaner
While the dust accumulated in the conventional US pre-cleaner must be removed by hand, the dust
swirled and sucked into TURBO-II and Enginaire (as example) are discharged automatically by a
centrifugal force.
Pre-creaner
(Example)
Engine hood
FVBH0291
TURBO-II Enginaire
(Example)
The air cleaner element must be replaced with new one after it is cleaned 6 times. If this new indicator is
used, however, the air cleaner element can be replaced according to its clogging condition. As a result,
the maintenance cost can be reduced.
16-4
(3) Recommendation for High Altitude SPECIAL APPLICATION
RECOMMENDATION
As altitude is increased, air is more rarefied (atmospheric oxygen is reduced) and the quantity of fuel is
increased for the quantity of air. As a result, combustion becomes incomplete and the exhaust temperature
rises. The rise of the exhaust temperature can cause a serious engine trouble such as melting of the valves.
In addition, the air resistance decreases and the turbocharger speed rises extremely and its lifespan is
shortened remarkably.
1) The fuel injection rate must be reduced to secure a proper air-fuel ratio for combustion. If a mechanical
injection pump is employed, it must be readjusted mechanically. If fuel is controlled electronically, the
software of the engine controller must be changed.
2) Turbocharger
1) The turbocharger may need to be replaced with one equipped with an over-speed prevention device.
2) The turbocharger may need to be replaced with a water-cooled one to prevent shortening of its lifespan
caused by high temperature.
(Example: Water-cooled turbocharger)
Oil
Water (coolant)
Quick-release valve
Pressure reducing
valve
Hydraulic tank
pressure switch
16-5
(3) Recommendation for High Altitude SPECIAL APPLICATION
RECOMMENDATION
(Example: HD785-5 with high altitude specification)
(1) (2)
(3)
FVBH0299
FVBH0292
3) Pressurization of radiator
The radiator cap is replaced to
prevent lowering of boiling
point at high altitude.
16-6
(4) Recommendation for Cold and SPECIAL APPLICATION
Extremely Cold Weather Area RECOMMENDATION
In a cold district or a cold season, the engine does not start easily because of the low temperature. The
reasons for this phenomenon is that the battery lowers in function and cannot supply a necessary current and
the resistance to rotation increases as the viscosity of the lubricating oil of the power train and hydraulic oil
increases. In addition, if the temperature lowers below -20C, the oil in the track rollers and final drive
solidifies. As a result, the floating seals are dragged and the O-rings are broken, and that can cause internal
breakage.
To solve these problems, the following measures are necessary.
(Example)
Cold Extremely
Spec
weather cold weather
Note Purpose
Minimum
Part ambient temp. -30 ~ -20C -50 ~ -30C
Battery (1) Large-capacity Large-capacity Cable Improvement of startability
Starting motor Large-capacity Large-capacity (On drive side)
Alternator Large-capacity Large-capacity
Measures to prevent overcooling
Reversible fan Necessary Necessary Since hydraulic driven fan can Prevention of lowering of power
rotate in reverse, reversible fan is
not necessary.
Radiator curtain Necessary Necessary
Radiator shutter Unnecessary Necessary
Kilting Unnecessary Necessary
Reduction of dragging torque
Oil pan heater (2) Unnecessary Necessary Improvement of startability
Combustion heater (3) Unnecessary Necessary (Lowering of resistance on driven
side)
Undercarriage
Employment of seals coated Necessary Necessary Prevention of breakage of
with nylon undercarriage caused by
Employment of oil which does Necessary Necessary solidification of oil
not solidify even at -55C
(Example) D275A-5 with extremely cold weather specification (cold weather specification for CIS)
1) Warmth keeping for easy engine start
Cylinder Block
1500W x 1
Receptacle
Engine Oil Pan Power Train Oil Pan Outside electric power
600W x 1 600W x 2
Battery
C200 x 2
Portable Rocket
Heater 30000 Kcal/h
16-7
(5) Tropical Weather Specification SPECIAL APPLICATION
RECOMMENDATION
If the machine is used in a jobsite where the atmospheric temperature exceeds +40C and rises up to +50C,
the temperature of the coolant and lubricating oil may rise above the allowable limit. Under this condition, the
engine and power train overheat and the lifespan of each part is shortened.
1) Large-sized radiator cooling fans
It is necessary to cool the coolant and lubricating oil properly. (Example: HD785-5, HD985-5)
2) Antifreeze
Antifreeze is not necessary naturally. Since fresh water is used, the heat balance is improved about
4C. Corrosion resistor must be added and replaced periodically, however, to prevent rusting of inside
of the engine.
It is also important for protection of the engine to use soft water such as city water, since water in rivers
and ponds is hard in many cases.
4) Heat-resistant alternator
PTO
Cooler
FVBH0293
16-8
CONTENTS
INDEX
SECTION 17
PRODUCTIVITY Sec 17A
EARTHMOVING DATA Sec 17B
SECTION 17A
PRODUCTIVITY
CONTENTS
Calculation of production ..................................... 17A-2
Bulldozers ............................................................... 17A-4
Dozer shovels & Wheel loaders ............................ 17A-6
Hydraulic excavators ............................................. 17A-9
Off-highway dump trucks .................................... 17A-13
Motor graders ....................................................... 17A-20
Soil compactors ................................................... 17A-21
Trash compactors ................................................ 17A-22
17A-1
PRODUCTIVITY
Calculation of production
When planning mechanized projects, one extremely important issue is how to calculate the production of the
machines.
The first step when estimating the production is to calculate a theoretical value as explained below. This
theoretical value is then adjusted according to actual figures obtained from past experience in similar
operations.
On the basis of these figures (particularly those for job efficiency) it will be possible to determine values
suitable for the project which will be neither over-optimistic nor wasteful.
Therefore it is first necessary to fully understand the theoretical calculations and to be able to obtain a figure
for working efficiency which is feasible on that job site.
From this it is possible to obtain a realistic figure for the work volume that can be attained.
60
Q= q N E = q E
Cm
Example:
1,000 m3 of unexcavated earth has to be hauled.
a) What will its volume be when it has been excavated ready for hauling?
b) What will its volume be if it is then compacted?
Earth volume
conversion factor (f)
17A-2
PRODUCTIVITY
Job efficiency depends on many factors such as topography, operator's skill, and proper selection and
disposition of machines. Time out of an hour machine use is actually used.
It is very difficult to estimate a value for job efficiency due to the many factors involved. Therefore, efficiency
is given in the following section as a rough guide.
17A-3
Bulldozers PRODUCTIVITY
BULLDOZERS
(DOZING)
The hourly production of a bulldozer when excavating or dozing can be obtained by using the following
fomula:
60
Q=q eE
Cm
where Q : Hourly production (m3 /hr; yd3/hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (in minutes) e : Grade factor
E : Job efficiency
When calculating the standard productivity of a bulldozer, the figure used for the volume of earth hauled in
each cycle, was taken as blade capacity. In fact, production per cycle differs with the type of soil, so the blade
fill factor is used to adjust this figure. See Table 2 to select the factor.
Average dozing Soil is loose, but impossible to doze full blade of soil. Soil with gravel, 0.9 ~ 0.7
sand, fine crushed rock.
High water content and sticky clay, sand with cobbles, hard dry clay and
Rather difficult dozing 0.7 ~ 0.6
natural ground.
Difficult dozing Blasted rock, or large pieces of rock 0.6 ~ 0.4
D D
Cm (min.) = + +Z
F R
17A-4
Bulldozers PRODUCTIVITY
(RIPPING)
Ripping production varies greatly according to such conditions as the properties of the rock, the method of
operation, and the operator's skill. Therefore, it is difficult to estimate. However, from available data, the
relationship as shown on the ripper section can be seen between seismic velocity and production.
QR QD
Q=
QR + QD
17A-5
Dozer Shovels PRODUCTIVITY
Wheel Loaders
DOZER SHOVELS AND WHEEL LOADERS
(LOADING)
Generally, the hourly production can be obtained by using the following formula:
60
Q=q E
Cm
where Q : Hourly production (m3 /hr; yd3 /hr) q : Production per cycle (m3; cu.yd3)
Cm : Cycle time (min.) E : Job efficiency
q = q1 K
FVBH0048
17A-6
Dozer Shovels PRODUCTIVITY
Wheel Loaders
(1) V-shape loading
Table 5 Average cycle time for wheel loader Table 6 Average cycle time for dozer shovel
Unit: min. Unit: min.
Bucket size 3.1 ~ Bucket size 3.1 ~
Loading ~ 3 m3 5 m3 5.1 m3 ~ Loading ~ 3 m3 5 m3
conditions conditions
A Easy 0.45 0.55 0.65 A Easy 0.55 0.60
B Average 0.55 0.65 0.70 B Average 0.60 0.70
C Rather difficult 0.70 0.70 0.75 C Rather difficult 0.75 0.75
D Difficult 0.75 0.75 0.80 D Difficult 0.80 0.80
Table 7 Average cycle time for wheel loader Table 8 Average cycle time for dozer shovel
Unit: min. Unit: min.
Bucket size 3.1 ~ Bucket size 3.1 ~
Loading ~ 3 m3 5 m3 5.1 m3 ~ Loading ~ 3 m3 5 m3
conditions conditions
A Easy 0.40 0.50 0.60 A Easy 0.55 0.60
B Average 0.50 0.60 0.65 B Average 0.60 0.70
C Rather difficult 0.65 0.65 0.70 C Rather difficult 0.75 0.75
D Difficult 0.70 0.75 0.75 D Difficult 0.80 0.80
The following table gives typical job efficiency as a rough guide. To obtain the actual production figure,
determine the efficiency in accordance with actual operating conditions.
60
Q=q E
Cm
where Q : Hourly production (m3/hr; yd3/hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (min.) E : Job efficiency
q = q1 K
17A-7
Dozer Shovels PRODUCTIVITY
Wheel Loaders
2. Cycle time (Cm)
Load and carry
D D
Cm = + +Z
1000VF 1000VR
60 60 Hauling distance
FVBH0050
Where D : Hauling distance (m, yd) VF : Travel speed with load (km/hr; MPH)
VR: Return speed (km/hr; MPH) Z : Fixed time (min)
Speed km/hr(MPH)
Operation conditions
Loaded Empty
Hauling on well compacted flat road, few bumps in road surface, no 10 ~ 23 11 ~ 24
Good
meeting other machines, can concentrate on L & C. (6.2 ~ 14) (6.8 ~ 15)
Average Few bumps on road surface, flat road, some auxiliary work carrying 10 ~ 18 11 ~ 19
large lumps of rock. (6.2 ~ 11) 6.8 ~ 12)
10 ~ 15 10 ~ 16
Rather poor Bumps in road surface, high rate of auxiliary work.
(6.2 ~ 9.3) (6.2 ~ 10)
Poor Large bumps in road, meeting other machines, difficult to carry out 9 ~ 12 9 ~ 14
smooth work, large amount of auxiliary work. (5.6 ~ 7.5) (5.6 ~ 8.7)
Z= t1 + t2 + t3 + t2
17A-8
Hydraulic Excavators PRODUCTIVITY
HYDRAULIC EXCAVATORS
(CONSTRUCTION APPLICATION)
3600
Q=q E
Cm
where Q : Hourly production (m3 /hr; yd3 /hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (sec.) E : Job efficiency
q = q1 K
17A-9
Hydraulic Excavators PRODUCTIVITY
However, here we use cycle time = (standard cycle time) (conversion factor)
The standard cycle time for each machine is determined from the following table.
Table 11 Standard cycle time for backhoe Unit: sec
Range Swing angle Range Swing angle
Model 45 ~ 90 90 ~ 180 Model 45 ~ 90 90 ~ 180
PC60 10 ~ 13 13 ~ 16 PC240 15 ~ 18 18 ~ 21
PC100 11 ~ 14 14 ~ 17 PC270 15 ~ 18 18 ~ 21
PW100, PW130ES 11 ~ 14 14 ~ 17 PC300, PC350 15 ~ 18 18 ~ 21
PC120, PC130 11 ~ 14 14 ~ 17 PC380 16 ~ 19 19 ~ 22
PC160 13 ~ 16 16 ~ 19 PC400, PC450 16 ~ 19 19 ~ 22
PW170ES 13 ~ 16 16 ~ 19 PC600 17 ~ 20 20 ~ 23
PC180 13 ~ 16 16 ~ 19 PC750 18 ~ 21 21 ~ 24
PC200, PC210 13 ~ 16 16 ~ 19 PC800 18 ~ 21 21 ~ 24
PW200, 220 14 ~ 17 17 ~ 20 PC1250 22 ~ 25 25 ~ 28
PC220, PC230 14 ~ 17 17 ~ 20 PC1800 24 ~ 27 27 ~ 30
17A-10
Hydraulic Excavators PRODUCTIVITY
(MINING APPLICATION)
The production for Mining Shovels shuld be calculated on loaded trucks per hour
Hourly production = loaded truck per hour x truck capacity x time utilisation
Qh = Tn x Tq x E
Theoretical loaded trucks per hour = 3600 sec/(Loading time per truck + spotting time per truck)
Tn = 3600/(tT + tsp)
Loading time per truck = (truck size/bucket capacity) rounded x cycle time
tT = (Tq/(Bc x K x loose density)) rounded x tc
Gh = hourly production (ton/hr; US ton/hr)
Tn = number of loaded trucks per hour
Tq = truck capacity (ton; US ton)
E = time utilisation per hour (%)
tT = truck loading time (sec)
tsp = truck spotting time (sec)
Bc = bucket capacity (m3; cu.yd)
K = bucket fill factor (%)
tc = cycle time (sec)
Yearly production = (hours per year - service hours) x availability x mine efficiency
QY = Qh x (hy - hs) x Sa x M
QY = yearly production
hy = theoretical hours per year (hr)
hs = service hour per year (hr)
Sa = mining shovel availability (%)
M = mine efficiency (%)
17A-11
Hydraulic Excavators PRODUCTIVITY
(1) Backhoe
Digging conditions
Model Backhoe application
Easy Average Severe
PC1400 23 ~ 25 26 ~ 28 29 ~ 31 Truck on lower level
PC3000 23 ~ 25 26 ~ 28 29 ~ 31 Average swing 45
PC4000 23 ~ 26 27 ~ 29 30 ~ 32
PC5500 24 ~ 27 28 ~ 30 31 ~ 33
PC8000 25 ~ 28 29 ~ 31 32 ~ 34
Digging conditions
Model Backhoe application
Easy Average Severe
PC1400 32 ~ 35 36 ~ 38 39 ~ 41 Truck on upper level
PC3000 32 ~ 35 36 ~ 38 39 ~ 41 Average swing 120
PC4000 33 ~ 36 37 ~ 39 40 ~ 42 Optimized working depth 4-5 m
PC5500 34 ~ 37 38 ~ 40 41 ~ 43 (13'1"16'5")
PC8000 35 ~ 38 39 ~ 41 42 ~ 44
Digging conditions
Model Backhoe application
Easy Average Severe
PC1400 26 ~ 29 30 ~ 32 33 ~ 35 Split bench application
PC3000 26 ~ 29 30 ~ 32 33 ~ 35 Average swing 90120
PC4000 27 ~ 30 31 ~ 33 34 ~ 36
PC5500 28 ~ 31 32 ~ 34 35 ~ 37
PC8000 29 ~ 32 33 ~ 35 36 ~ 38
(2) Front shovel
Digging conditions
Model Front shovel application
Easy Average Severe
PC1400 24 ~ 26 27 ~ 29 30 ~ 32 Truck on same level
PC3000 24 ~ 26 27 ~ 29 30 ~ 32 Average swing 60
PC4000 24 ~ 27 28 ~ 30 31 ~ 33
PC5500 25 ~ 28 29 ~ 31 32 ~ 34
PC8000 26 ~ 29 30 ~ 32 33 ~ 35
17A-12
Off-Highway PRODUCTIVITY
Dump Trucks
OFF-HIGHWAY DUMP TRUCKS
When carrying out operations using a suitable number of dump trucks of suitable capacity to match the
loader, the operating efficiency is calculated in the following order:
D D
Cmt = n x Cms + + t1 + + t2
V1 V2
(1) (2) (3) (4) (5)
(1) : Loading time
(2) : Hauling time
(3) : Dumping time
(4) : Returning time
(5) : Spot and delay time
1) Loading time
The time required for a loader to load a dump truck is obtained by the following calculation.
Loading time = Cycle time (Cms) No. of cycles to fill dump truck (n)
17A-13
Off-Highway PRODUCTIVITY
Dump Trucks
b) Number of cycles required for loader to fill dump truck full (n)
The payload of a dump truck depends on its capacity or weight.
* The bucket capacity and the body capacity, as a general rule, refer to heaped capacity but may be used
to refer to struck capacity depending on the nature of materials to be handled.
* The bucket fill factor is determined by the nature of soil to be excavated or loaded. In case of dozer
shovels or wheel loaders, a suitable factor can be selected from among those given in Table 3, 9, 10
according to the applicable loading condition.
17A-14
Off-Highway PRODUCTIVITY
Dump Trucks
Fig. 1 KOMATSU HD325 Dump Truck Travel Performance Curve
The maximum speed thus obtained is a theoretical value, and in order to convert this maximum speed to a
practicable average speed, the speed should be multiplied by a speed factor. An applicable speed factor can
be selected from the following table.
The above average speed is applicable in ordinary driving conditions. If there is any factor retarding the
vehicle speed, an applicable factor should be used.
17A-15
Off-Highway PRODUCTIVITY
Dump Trucks
c) Hauling time
If the hauling distance in each section is divided by the average speed given in the preceding
paragraph, the hauling time in each section will be obtained. If all of these times (for hauling and
returning) are added together, they will give the total hauling and returning time.
3) Dumping time
This is the period from the time when the dump truck enters the dumping area, to the time when the dump
truck starts its return journey after completing the dumping operation. The length of the dumping time
depends on the operating conditions, but average dumping times for favorable average and unfavorable
conditions are given by the following table.
However, particularly adverse conditions giving rise to extremely long dumping times are excluded.
4) Time required for the truck to be positioned and for the loader to begin loading.
The time taken for the truck to be positioned and
Operating conditions t2, (min.)
for the loader to begin loading also depends on
the operating conditions. As a general rule, a Favorable 0.1 to 0.2
suitable time can be selected from the table at Average 0.25 to 0.35
right. Unfavorable 0.4 to 0.5
As has so far been described, the cycle time of a
dump truck can be estimated by using the values
for factors obtained according to paragraph 1) to
4).
17A-16
Off-Highway PRODUCTIVITY
Dump Trucks
2. Estimating the number of dump trucks required (M)
The quantity of dump trucks required for use in combination with a loader working at its maximum
operating efficiency can be estimated by the following formula:
The total hourly production P of several dump trucks where they are doing the same job simultaneously is
estimated by the following formula:
60
P=C Et M
Cmt
Table 16 gives typical job efficiency as a rough Table 16 Job efficiency of dump truck (Et)
guide.
Operating conditions Job efficiency
To obtain the actual production figure, determine
the efficiency in accordance with actual operating Good 0.83
conditions. Average 0.80
Rather poor 0.75
Poor 0.70
When dump trucks and loaders are used in combination, it is most desirable that the operating
capacity of the dump trucks be equal to that to the loaders. That is, conditions satisfying the
following equation are most desirable. Consequently, if the value of the left equation is larger, the
group of dump trucks has a surplus capacity. On the other hand, if the value of the right equation is
larger, the group of loaders has a surplus capacity.
Et M x q1 K
60 60
C Es
Cmt Cms
The left equation has already been described. The right equation has the following meaning.
17A-17
Off-Highway PRODUCTIVITY
Dump Trucks
EXAMPLE
A HD325, working in combination with a WA600, is hauling excavated material to a spoil-bank
500 meters away.
What is the hauling capacity of the HD325?
n is taken to be 4.
Loaded weight :
Weight when loaded = n bucket capacity bucket fill factor loose specific gravity 1,000
= 4 5.4 m3 0.9 1.6 1,000 = 31,104 kg
Using the Travel Performance Curve and Brake Performance Curve, the maximum speed for each
section can be calculated.
The values for HD325 can be calculated from PERFORMANCE CURVE on the section 7A.
17A-18
Off-Highway PRODUCTIVITY
Dump Trucks
The result is shown in the table below and the table of Hauling time and Returning time is 3.00 min.
60 60
P=C Et = 19.44 0.83 = 137.3 m3/h
Cmt 7.05
17A-19
Motor Graders PRODUCTIVITY
MOTOR GRADERS
The motor grader is used for many purposes such as maintaining roads, final finishing for earthmoving
projects, trenching and bank cutting.
Therefore there are many methods of expressing its operating capacity.
NOTE: Graders usually operate on long stretches, so the time required for gear shifting or turning can be
ignored.
ND
T= VE
17A-20
Compactors PRODUCTIVITY
W
N= n
Le Lo
SOIL COMPACTORS
There are two ways of expressing the productivity of compactors: by the volume of soil compacted, and by
the area compacted.
W V H 1000 E
Q=
N
Where
Q = Hourly production (m3/hr)(volume of soil compacted)
V = Operating speed (km/hr)
W = Effective compaction width per pass (m)
H = Compacted thickness for one layer (m)
N = Number of compaction (number of passes by compactor)
E = Job efficiency
17A-21
Compactors PRODUCTIVITY
W
N= n
Le Lo
TRASH COMPACTORS
There are two ways of expressing the productivity of compactors: by the volume of trash compacted, and by
the area compacted.
W x V x H x 1000 x
Q=
N
Where
Q = Hourly production (ton/hr)(volume of trash compacted)
V = Operating speed (km/hr)
W = Effective compaction width per pass (m)
H = Compacted thickness for one layer (m)
N = Number of compaction (number of passes by compactor)
= Compacted trash specific gravity (ton/m3)
17A-22
Compactors PRODUCTIVITY
2. Example
Hourly production of the work having following conditions is calculated:
Conditions
Machine: WF450T-3, WF550T-3, WF650T-3
Compacted thickness for one layer: H = 0.6 m
No. of Compaction: N=5
Compacted trash specific gravity: = 0.5 ton/m3
Estimating the production of trash compactors
WF450T-3 WF550T-3 WF650T-3
1 141 156 181.8
2 282 312 363.6
3 423 468 545.4
4 564 624 727.2
5 705 780 909
6 846 936 1090.8
7 987 1092 1272.6
1400
1200
Production (ton/hr)
1000
WF450T-3
800
WF550T-3
600
WF650T-3
400
200
0
0 2 3 4 5 6 7
17A-23
MEMO
SECTION 17B
EARTHMOVING
DATA
CONTENTS
Soil classification ................................................... 17B-2
Hauling performance of
construction machines:
Introduction ........................................................ 17B-4
Inherent machine capability ............................. 17B-4
Elements limiting the inherent
machine capability ......................................... 17B-5
Machine capabilities required
for earthmoving operations ......................... 17B-7
Summary and application ................................. 17B-9
Traffic-ability .................................................... 17B-11
Machines and site planning ................................ 17B-12
17B-1
Soil Classification EARTHMOVING
DATA
SOIL CLASSIFICATION FOR EARTH-MOVING OPERATIONS
Various classifications have been established properly for soil depending on the purposes of earth-moving
operations. Generally speaking, however, detailed classifications of soil are not required for the ordinary
earth-moving operations.
Rather, attention is required to be given to whether the soil to be handled is of special ores or contains special
clay minerals.
Hereinafter is described the knowledge necessary for earth work planning prior to such operations as
digging, loading, hauling, pushing (spreading), rolling compaction, etc., on ordinary terrain.
* Data (figures) to be given hereinafter vary largely depending on various operating and environmental
conditions. Consequently, before starting the earth work, tests should be conducted to obtain correct
data for operations.
Some knowledge of the weight data per unit volume of materials of their major ingredients is important for
their handling or hauling in mines, etc.. The specific weight data of some major types of soil and ingredients
are given below.
17B-2
Soil Classification EARTHMOVING
DATA
ROCK TYPES AND COMPRESSION STRENGTHS
17B-3
Hauling Performance of EARTHMOVING
Construction Machines DATA
HAULING PERFORMANCE OF CONSTRUCTION MACHINES
INTRODUCTION
"What Model or type of a tractor is most suitable to pull this trailer?" "Is this bulldozer capable of going up this
hill while pulling that scraper loaded full?"
In order to give explicit answers to these questions, it is necessary to have the right understanding of the
hauling performance of vehicles.
For easy understanding, let us explain the hauling performance with the following machine capabilities and
related elements.
a) Output power
The engine horsepower of a construction machine is the most essential power of those developed by the
machine itself. This can be estimated by multiplying one element (traction force) by another element (a
travel speed). Accordingly, where the engine of a machine develops a rated power; the smaller the travel
speed, the larger the traction force or drawbar pull will be. On the contrary, the larger the travel speed, the
smaller the drawbar pull.
b) Gear-shifting
Gear-shifting is effected to determine the optimum drawbar pull and travel speed required for
accomplishing a given job. Therefore, a machine has several gears to be selected by shifting for the
optimum travel speed.
The table below gives the drawbar pull and travel speeds of a direct-drive type bulldozer.
17B-4
Hauling Performance of EARTHMOVING
Construction Machines DATA
The rated drawbar pull is such a traction force that can be developed at the rated engine power and the
rated revolutions (rpm). The rated drawbar pull is normally estimated by taking into account the travelling
resistance (which will be explained later) and the mechanical loss of power in its line from the engine to the
sprockets.
The maximum drawbar pull is the maximum traction force that can be developed by a machine and is
estimated from the maximum engine torque. In other words, the maximum drawbar pull of a machine can
be developed by the lugging ability of its prime mover and is practically obtained in a low gear.
Consequently, the maximum drawbar pull is shown only at F1 on the specifications.
USton
drawbar pull are obtained from the combined
ton
kN
performance between the engine and the torque 44 480 48
converter. 40 440 44
Drawbar pull
320 32 F1
28
hauling performance is indicated by curves. The 280 28
graph at right gives the hauling performance 24
240 24
curves of the TORQFLOW-drive type bulldozer. 20
200 20
16 F2
160 16
12
120 12
8 80 8 F3
4 40 4
0 0 0
0 2 4 6 8 10 12 14 16 18 20km/h
0 2 4 6 8 10 12 MPH
Travel speed
1. What are the elements limiting the inherent machine capability or power? These are;
a) Traction between the undercarriage (tracks or wheels) and the road surface.
b) Altitude
Altitude in b) will be described in a separate issue and herein is examined the problem of traction
between the undercarriage and the road surface.
"When a motor vehicle cannot be moved due to slipping on the snow-covered road, what should be done
to move the vehicle?"
The answers are;
Solution Reason
(1) Add load to the driving wheels.
The traction force is increased with the added
load.
(2) Install chain to the wheel tires or replace
the tires with the spiked type. The undercarriage is made so as to develop more
traction.
(3) Scatter sand or spread straw mats on the The critical traction force is increased by the
road surface. higher coefficient of traction.
The above facts can also be applied to a crawler tractor. Now, let us look at the coefficient of cohesion and
the critical traction force or traction used in the above table.
The critical traction is the maximum traction available depending on the cohesive condition of the road
surface. This can be estimated by the following formula.
17B-5
Hauling Performance of EARTHMOVING
Construction Machines DATA
Fd = dGd
Where, Fd : Critical traction (kg)
d : Coefficient of traction
Gd : Weight imposed on the driving wheels (kg)
The coefficient of traction depends on the condition of the road surface. Any applicable coefficient of
traction can be selected from among those given in the table below.
Weight to be imposed on the driving wheels can be determined by referring to the table below
Crawler type tractor 2-wheel drive machine 4-wheel drive machine
Weight imposed on
Total weight of tractor the driving wheels Total weight of tractor
Example (1) Assume that the D155 tractor pulling a towed compactor must do compaction in a dry,
loose terrain. What is the critical drawbar pull?
Solution: The operating weight of the D155 tractor is 26730 kg. Then, Fd = 0.60 26730 = 16040 kg
Example (2) What are the values of the drawbar pull which the D50A-15 bulldozer can develop at F1
and F2 in a dry, loose terrain?
Solution: The operating weight of the D50A-15 bulldozer is 11400 kg. Its critical drawbar pull is
11400 0.60 = 6840 kg.
The rated drawbar pull indicated in its specifications is 8280 kg at F1 or 5920 kg at F2.
Consequently
at F1: The rated drawbar pull is 8280kg, but the tracks will start shoe slip at the
drawbar pull beyond 6840kg, making it impossible for its drawbar pull to be
utilized to the full. Thus, the critical drawbar pull practically available is 6840
kg.
at F2: The rated drawbar pull is 5920kg. Thus, the drawbar pull can be utilized to
the full.
17B-6
Hauling Performance of EARTHMOVING
Construction Machines DATA
MACHINE CAPABILITIES REQUIRED FOR EARTHMOVING OPERATIONS.
1. What are the elements limiting the machine capabilities required for earthmoving operations?
When a truck is traveling on the road or going uphill, the following phenomena will be encountered as a
matter of course.
2. Rolling resistance
When a vehicle is traveling on the ground or road, the retarding force of ground against wheels or tracks
should take place. Such a resistance varies depending on the ground or road surface conditions.
The rolling resistance is measured in the ratio to the vehicle weight and can be estimated by the following
formula.
Wr = rG
The coefficient of rolling resistance can be selected from among those given in the table below, according
to the ground or road surface conditions.
The coefficient of rolling resistance can be selected from among those given in the table below, according
to the ground or road surface conditions.
r (%)
Type and conditions of ground Vehicle w/iron wheel Tractor w/pneumatic
treads Crawler tractor tires wheels
Iron truck 1.0
Concrete floor 2.0 2.8 2.3
Macadam road 2.9 3.3 2.8
Wood pavement 2.5
Dry unpaved plain road 4.5 4.6 3.5
Firm terrain 10.0 5.5 4.0
Dry, loose terrain 11.5 6.5 4.5
Soft terrain 16.0 8.0 9.0
Loose gravel 15.0 9.0 12.0
Loose sand 15.0 9.0 12.0
Muddy ground 12.0 16.0
Packed snow 3.7
Ice 2.0
In a crawler tractor, too, the rolling resistance should vary depending on the type of applied soil. The
representative values of rolling resistance, however, are taken into account in preparing the curves for
drawbar pull and hauling performance of crawler tractors. Therefore, the varying rolling resistance may
practically be ignored.
17B-7
Hauling Performance of EARTHMOVING
Construction Machines DATA
Example (3) What is the rolling resistance of the D85-12 tractor to pull the RS12 scraper (empty).
The ground surface is in a soft terran.
Example (4) What is the rolling resistance of the D155 tractor to pull the RS24 scraper loaded full.
The ground surface is in a dry loose terran.
3. Grade resistance
The grade resistance is the retarding force of gravity to be encountered when a vehicle is going uphill.
The grade resistance can be estimated by the following formula.
Ws= Gsin
a
Where, Ws : Grade resistance (kg) b
Ws
G : Operating weight of a vehicle (kg)
: Angle formed with the horizon (degree) G
FVBH0041
A grade (degree) and sin can be selected from among those given in the table below.
Example (5) What is the grade resistance against the D50A-15 angledozer going uphill at 15 ?
Solution: The operating weight of the D50A-15 angledozer is 11400 kg. Thus, the grade resistance
will be 11400 0.259=2950 kg
4. Hauling resistance
The hauling resistance is the grand total of the rolling resistance, grade resistance, accelerating resistance
and air resistance. However, construction machines are slow in the travel speed. Normally, the hauling
resistance of construction machines may be considered to be the total of the rolling resistance and grade
resistance.
The grade resistance acts so as to retard the uphill traveling of a vehicle, whereas the grade resistance
acts so as to accelerate the downhill traveling. The above relationships can be indicated as follows:
17B-8
Hauling Performance of EARTHMOVING
Construction Machines DATA
Example (6) What is the hauling resistance against the D60-6 tractor going uphill at 4 in a dry, loose
terrain, while pulling an RS08 scraper with maximum load?
Solution: The gross weight of the RS08 with maximum load is 18870 kg.
The rolling resistance factor is 0.045. Thus, the rolling resistance is 0.045 18870 = 850
kg
The weight of the D60-6 tractor is 12550 kg.
The gross weight of the RS08 is 18870 kg.
Then, the total weight of both machines is 31420 kg
Consequently, the grade resistance is 0.07 31420 = 2200 kg.
Thus, the hauling resistance is 850 + 2200 = 3050 kg.
2. Application
Example (7) Assume that the D65 tractor is used to pull a wheeled wagon (the empty weight: 17
tons) with a 50-ton load in a dry, loose terrain.
What are the operating gears and the corresponding approx. travel speeds available on
a flat, level ground? What is the degree of a hill climbable under the same condition?
17B-9
Hauling Performance of EARTHMOVING
Construction Machines DATA
Operating gears and travel speeds on flat,
kg x 103
level ground
lb x 103
kN
From the hauling performance curves below, the 240
52
24
200 44 20
approx. 9.0 km/h at F3 or
180 40 F1
approx. 6.0 km/h at F2
18
160 36
16
Drawbar pulI
32
140 14
28
120 12 F2
24
100 10
20
80 8
16
60 6
12
40 4 F3
8
20 4 2
0 0 0
0 2 4 6 8 10 12 14 km/h
0 2 4 6 8 MPH
Travel speed
Tractor weight + wagon weight + pay load = 12750 + 17000 + 50000 = 79750 kg
The grade resistance retarding per angle of grade is 79750 0.018 = 1435 kg
Consequently,
The explanations made so far on the travelling or hauling performance of construction machines pertain only
to the traveling of individual machines and the pulling of towed vehicles by tractors. For instance where a
tractor pulls a scraper, it can be judged whether the tractor can be used for this purpose, but it can not be
determined whether the tractor can perform a digging or a loading operation under the same conditions as
mentioned above. Operators or field-superintendents are requested to keep it in mind that such a judgement
should be based on the operators' accumulated experiment or on the reference for such operating
combinations or cooperation among towing tractors and towed vehicles as recommended by KOMATSU.
17B-10
Hauling Performance of EARTHMOVING
Construction Machines DATA
TRAFFICABILITY
Operating efficiency of a construction machine depends largely on the ground surface on which the ma-
chine travels. In clay, loam or clayey soil high in water or moisture content, the bearing force of soil is low and
a ''kneading'' phenomenon is liable to occur. Consequently, there are cases where a construction machine
cannot be operated because of the type and conditions of soil. The degree of the traveling capability of a
construction machine is called the traffic-ability.
In general, traffic-ability is indicated by a cone index No. (The method of measuring a cone index No. will be
described later.)
The larger the cone index number becomes, the higher the traffic-ability of the machine will become. In other
words, on the soil larger in cone index No., a construction machine will be able to travel easier.
The minimum cone index numbers required for various types of construction machines to perform digging,
hauling operations, etc. are given below.
NOTE:
Cone index Type of construction machine Ground pressure In determining a cone index, apply
No. (kg/cm2) the cone penetrometer at 3 or 4
Below 2 Ultra swamp bulldozer (PL class) 0.15 ~ 0.25 points at least to average the
2 to 4 Swamp bulldozer (P Class) 0.2 ~ 0.3 variations in the measured values.
4 to 5 Small-size bulldozer (D20 ~ D31) 0.3 ~ 0.6
Medium-size bulldozer Handle
5 to 7 (D41~D75S) 0.6 ~ 0.8
Strrain ring for
7 to 10 Large-size bulldozer 0.7 ~ 1.5 resistance
(D85 ~ D575) & towed scraper Measurement
10 to 13 Motor scraper
15 & more Dump truck Steel rod
Cone FVBH0042
17B-11
Machines and Site Planning EARTHMOVING
DATA
1. Blasting and bench width
Minimum bench width should be at least twice the cutting face height.
15 m (49'3") or less
bench width
17B-12
Machines and Site Planning EARTHMOVING
DATA
3. Haul road planning
3.1 Dump truck width and haul road size
The width dump truck haul road must have sufficient room to accommodate the model of dump truck
planned for use on the site.
In order to accommodate one lane in each direction, with trucks going 30 km/h (18.6 MPH), the
haul road must be at least four times the truck width
Ditch
Truck Truck
width width
Center
crearance (B)
Shoulder Shoulder
(A) (C)
Width in
use
Total
width
Center clearance (B) Downhill shoulder (A) Uphill shoulder (C) Total road width
Model Speed km/h (MPH)
m (ft.in) m (ft.in) m (ft.in) m (ft.in)
HD255-5 20 (12.4) 2.0 (6'7") 2.0 (6'7") 1.0 (3'3") 11.4 (37'5")
Truck width 30 (18.6) 2.5 (8'2") 2.0 (6'7") 1.5 (4'11") 12.4 (40'8")
3.2 m (10'6") 40 (24.9) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 12.9 (42'4")
HD325-6 20 (12.4) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 13.8 (45'3")
Truck width 30 (18.6) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 14.9 (48'11")
3.7 m (12'2") 40 (24.9) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 15.9 (52'2")
HD405-6 20 (12.4) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 13.8 (45'3")
Truck width 30 (18.6) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 14.9 (48'11")
3.7 m (12'2") 40 (24.9) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 15.9 (52'2")
HD465-7 20 (12.4) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 15.9 (52'2")
Truck width 30 (18.6) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 16.9 (55'5")
4.2 m (13'9") 40 (24.9) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 17.9 (58'9")
HD605-7 20 (12.4) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 15.9 (52'2")
Truck width 30 (18.6) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 16.9 (55'5")
4.2 m (13'9") 40 (24.9) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 17.9 (58'9")
HD785-5 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (4'11") 20.9 (68'7")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (6'7") 22.4 (73'6")
5.7 m (18'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (8'2") 23.4 (76'9")
HD985-3 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 20.9 (68'7")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 22.4 (73'6")
5.7 m (18'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 23.4 (76'9")
HD1200-1 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.1 (72'6")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 23.6 (77'5")
6.3m (20'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 24.6 (80'9")
HD1500 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.7 (74'6")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 24.2 (79'5")
6.62 m (21'9") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 25.2 (82'8")
17B-13
Machines and Site Planning EARTHMOVING
DATA
Center clearance (B) Downhill shoulder (A) Uphill shoulder (C) Total road width
Model Speed km/h (MPH)
m (ft.in) m (ft.in) m (ft.in) m (ft.in)
630E 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.8 (74'10")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 24.3 (79'9")
6.65 m (21'10") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 25.3 (83'0")
730E 20 (12.4) 3.5 (11'6") 4.0 (13'1") 2.5 (8'2") 24.5 (80'5")
Truck width 30 (18.6) 4.0 (13'1") 5.0 (16'5") 2.5 (8'2") 26.0 (85'4")
7.25 m (23'9") 40 (24.9) 4.5 (14'9") 5.0 (16'5") 3.0 (9'10") 27.0 (88'7")
830E 20 (12.4) 3.5 (11'6") 4.0 (13'1") 2.5 (8'2") 24.5 (80'5")
Truck width 30 (18.6) 4.0 (13'1") 5.0 (16'5") 2.5 (8'2") 26.0 (85'4")
7.26 m (23'10") 40 (24.9) 4.5 (14'9") 5.0 (16'5") 3.0 (9'10") 27.0 (88'7")
930E-3 20 (12.4) 4.0 (13'1") 4.0 (13'1") 2.5 (8'2") 27.9 (91'6")
Truck width 30 (18.6) 4.5 (14'9") 5.0 (16'5") 2.5 (8'2") 29.4 (96'6")
8.69 m (20'6") 40 (24.9) 5.0 (16'5") 5.0 (16'5") 3.0 (9'10") 30.4 (99'9")
17B-14
CONTENTS
INDEX
SECTION 18
OWNING &
OPERATING COSTS
CONTENTS
Estimation of the owning and operating cost:
Owning cost ..........................................................18-2
Operating cost ......................................................18-4
Example .................................................................18-6
Application and operating conditions table .......18-9
Fuel consumption ...................................................18-10
Lubricant consumption ..........................................18-15
Tire life .....................................................................18-18
Optimum Fleet Recommendation (OFR)
software program ....................................................18-19
Komatsu information on reliability
and durability ..........................................................18-20
18-1
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
ESTIMATION OF THE OWNING & OPERATING COSTS.
Along with the trend for mechanization adopted for economical and satisfactory job accomplishment,
equipment costs now occupy a large proportion of the overall construction cost. Therefore, the estimation of
the equipment costs has become more important. Success or failure in a contract for a construction job is
virtually dependent on the estimates of the equipment costs. In other words, careful consideration of the
equipment costs is of prime importance, if a contractor is to fulfill the contract at a profit. Unless estimates are
made properly, there will occur cases where a construction job cannot be accomplished at a profit.
1. OWNING COST
The equipment owning cost is the expense required, as a matter of course, for the purchase and
possession of the equipment as a property of its owner and consists of the following two items.
(1) Depreciation
(2) Interest, insurance and taxes
1-1.DEPRECIATION
In general, depreciation is a tax term referring to the legally permitted decline in value from the original
purchase price of equipment, and is an assessable property (expressed in units of years). Depreciation
referred to herein is a business practice for conserving the investment in the form of purchased
equipment, in other words, for making preparations in a systematic manner for the fund necessary for
replacing the existing equipment with new or any other equipment.
Net Depreciation Value
Depreciation =
Depreciation Period in Hours
Net depreciation value means Original purchase price minus Resale or Trade-in price.
The depreciation period varies considerably according to the equipment operating conditions. It is also
affected by the speed of fund collection desired by the user, environmental and economic conditions in
its applied territory. Furthermore, it goes without saying that maintenance of equipment is a significant
18-2
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
factor in determining the economical life of the equipment. Proper maintenance will extend the life of
equipment. On the other hand, poor or improper maintenance will shorten the life. There is the legal
depreciation period in each country for tax purpose. However, in the business, it is rather usual to
employ the equipment owning period as the depreciation period. The equipment owning period is
strongly affected by the economical life of the equipment (Years or hours for which the equipment can
be used gainfully).
When you need to estimate the value of the economical life for a specific product, please consult your
distributor or Komatsu representative. They can suggest you with the appropriate values from their
experience and the data they have. (The former handbook contained the depreciation period, but they
are removed because the straight numbers sometimes mislead the readers.)
The net depreciation value is the net amount to be considered in the depreciation of equipment.
In case of crawler-type tractors, their purchase prices are used to calculate the net depreciation value.
In wheel type equipment, their tire values should be deducted from the purchase prices, because,
unlike the undercarriages of crawler-type equipment, tires wear out earlier than the equipment chassis
proper, and tires are not cheap. Further, there is a possibility of tires becoming unserviceable suddenly
in unexpected accidents. Hence, it is necessary in tire depreciation to include their degrees of wear into
the operating cost.
Some users will hope that in terms of book value the machine will depreciate completely within the
depreciation period. Other users will hope that the residual value expressed as resale value or trade-in
value will be left. For these users the resale value or trade-in value is an important factor in reducing the
capital invested. This value is also a factor when deciding to purchase a new machine.
The resale value or trade-in value changes greatly according to the territory. Therefore the conditions in
that territory must be considered when determining these values. However, major factors in deciding
resale value or trade-in value are the hours of operation, nature of work and working environment. The
real resale value or trade-in value cannot be decided simply, but when a realistic value is decided it is
subtracted from the purchase price to give the Net Depreciation value. It is then possible to obtain the
depreciation from the Net Depreciation Value.
Insurance and taxes are imposed on the annual residual values of the equipment, which requires
knowledge of depreciation as prescribed by the tax law. The depreciation rate or the depreciation
period (whether it is a fixed amount or a fixed rate) vary according to the country. For the correct values
of insurance and taxes on the residual value in a country, the calculation formulas established in that
country must be used.
Interest, insurance and taxes are imposed on the residual value that is the difference between the
purchase price and the depreciated amount. This residual value decreases every year. However, when
the user calculates owning & operating costs, it is convenient to consider interest, insurance and taxes
as a constant amount paid out each year. For this reason, the machine will be considered here to
depreciate by a constant annual amount. A calculation is made of the average value of the residual
value at the beginning of each year within the depreciation period, and interest, insurance and taxes are
imposed on this value. By dividing this value by the number of hours the user expects to operate the
machine in one year, the hourly value can be calculated.
The annual rates are the total of those of interest, insurance and tax.
The factor can be obtained by using Table 1 or can be calculated by the following formula.
(n 1) (1 r)
Factor = 1
2n
18-3
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
where n: Depreciation period
Machine worth at trade-in or resale time
r: Trade-in value rate =
Delivered price
(Example)
Delivered price: $100,000 Annual rates: 15% Annual use in hours: 2,000 hrs
Trade-in value: $25,000 Depreciation period (n) : 4 years
(4 1) (1 0.25) 0.95
Factor = 1 = 0.72
24 ye
ar
s
0.90 in
d
rio
pe
When obtaining the factor by using Table 1. ec
n
tio =2
ia n
0.85 p r
Enter r = 0.25 in Table 1
e
)
:D 3
(n1) (1r)
n
n=
2n
Applicable factor is 0.72 0.75
4
Factor (1-
n=
0.72 $100,000 0.15
5
n=
0.72
6
n=
7
n=
0.65
2. OPERATING COST
8
n=
The equipment operating costs are proportional to the time that the 0.60
2-1. FUEL
More definite fuel consumption data should be measured in the field.
It is possible, however, to anticipate the actual or approximate consumption values according to the
actual operating conditions without measuring the consumption. Table 3 gives the hourly fuel
consumption values for KOMATSU construction machines. In this table, the average values are given,
provided that the job conditions are classified into three different ranges of application. If a user has
data on certain operating conditions, more correct or realistic values will be obtained by applying these
data in similar operating conditions, provided that the equipment is limited to the same type as that
used in the user's data.
To estimate hourly fuel cost, select the job condition based on application and find hourly fuel
consumption.
Hourly fuel cost = Hourly fuel consumption Local unit price of fuel
2-2. LUBRICANTS (OIL AND GREASE), FILTERS AND PERIODIC MAINTENANCE LABOR
It is possible to measure the consumption of lubricants and grease in the same manner as the fuel
consumption. The consumption values of lubricants and grease are also obtained by calculation on the
basis of lubrication intervals, but they are affected greatly by the type of machines and their operating
conditions, which makes it difficult to specify the consumption suited for various machines and their
operating conditions. Hence, Table 4 gives the average consumption on the data obtained in the past,
which is available for your reference.
Prices of lubricants vary in countries or areas and, therefore, the local price (price in that country or
area) should be used.
In KOMATSU construction machines, filter replacement intervals are standardized for each machine
model. Thus, the cost of filter can be calculated from the local price of filter and the replacement
interval. The hourly filter cost is the total of the hourly costs for each type of filter.
18-4
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
(Example)
Number of filters A Local price of filter A
Hourly cost of filter A =
Replacement interval of filter A
The same method is used for calculating the hourly filter cost of other filters. For quick estimation,
hourly filter costs are about 50% of hourly lubricant costs. If they are used in the dusty terrain, the
calculated value should be multiplied by a proper factor.
If necessary, we suggest you to contact the local Komatsu distributor with necessary
information to get the assistance for estimating them.
2-3. TIRES
As has been described in Depreciation, tires are in the category of consumable parts and tires are
generally expensive. Therefore, it is better to include the tire cost as an individual item in the operating
costs. Tire cost is calculated by the following formula.
Tire price
Hourly tire cost =
Estimated life
As tire prices vary in each country or area, the price of tires actually bought by a user should be applied.
It is difficult to indicate definitely the tire life, because the tire life is affected by many factors. However,
the general measurements for the life expectancy of tires can be indicated on the basis of past
experience and data obtained from the tire manufacturers. Refer to Table 4.
In this table, the approximate life values are given for three different types of conditions. The optimum
value for a certain ground condition is one of those obtained by a user in experience on similar ground
conditions. When recapped tires are to be used, their prices and life expectancy must be changed
correspondingly.
18-5
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
3. EXAMPLE OF CALCULATION
PC200 is delivered for $92,811 at a job site.
Applications:
Mass excavation or trenching where machine digs all the time in natural bed clay soils. Some traveling and
steady, full throttle operation.
Net Depreciation Value
Since the machine is a crawler-type, tires are not involved. This owner knows from experience that at trade-in
time, the machine will be worth approximately 10% of its delivered price 4 years from now.
Trade-in value is $9,281
Net depreciation value = $92,811 $9,281 =$83,530
OWNING COST
Depreciation:
Putting 10,000 hours as the example depreciation period.
$83,530
Depreciation = = $8.35
10,000
Calculate the Factor according to depreciation period and trade-in value rate, which is 0.66.
Enter the annual rates of interest, insurance and taxes and total them, which is 0.14 as an example.
0.66 $92,811 0.14
Interest, insurance, taxes cost = 2,500 = $3.43
Add up the depreciation cost and interest, insurance, taxes cost for total owning.
OPERATING COST
Fuel: See Table 3.
The intended application is in medium range. The estimated fuel consumption from table is 12.5 liter/hour.
Cost of fuel in this area is $0.2/liter.
Consumption Unit cost = 12.5 liter/hr $0.2/litre = $2.5
Repair Cost
Use local Komatsu distributors estimation. (For calulation example: use $3.30)
Repairs = $3.30
Since the machine does not have fast wear parts like ripper points of bulldozer or cutting edge of motor
grader, special item can be disregarded.
Operator hourly wage in this area is $16.00.
Add up the fuel cost, lubricant grease filter costs, repair cost and operator's hourly wage for operating cost.
18-6
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
EXAMPLE
18-7
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
BLANK SHEET
18-8
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
The following tables show application and operating conditions in three categories.
Condition 1 is the light duty for machine, conditions 2 is the average and Condition 3 is the severe duty. It is
the guide line and can be used with fuel and tire life tables to assist to select fuel and tire costs.
Table 2-1 Application and Operating Conditions
Condition 1 Condition 2 Condition 3
Crawler type tractors Pulling scrapers, Digging, dozing, ripping of Digging, dozing, ripping of
agricultural implements. soft rock, clay, most hard rock.
Spreading work. material.
Scraper pushing
Skidding
Land clearing
Dozer shovels Loading of light material Continuous loading from Bank excavation and
from stock pile with stock pile. loading.
substantial Idle time. Light excavation and Loading of blasted
loading. material.
Hydraulic excavators Slope finishing, light Mainly excavating and Excavation of hard bank.
material digging, and loading.
other light-duty operation. Breaker operation.
Motor graders Finishing and other light- Mainly road maintenance, Maintenance or repair of
duty operations. repair and construction. hard surface road,
Snow removal remarkable scarifying and
or ripping operation.
Wheel loaders Loading of light material Continuous loading from Bank excavation and
from stock pile stock pile loading.
Operation with substantial Light-duty excavation and Loading of blasted rock.
truck waiting time. loading.
Wheel dozers Light surface finishing Average surface finishing Digging and dozing hard
Spreading light material Digging and dozing soft earth
earth
18-9
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
Table 3 Hourly Fuel Consumption
(1) Bulldozers
Range Low Medium High
Amount U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr.
Machine
D21A, P-7 0.5 ~ 1.0 1.9 ~ 3.8 1.0 ~ 1.5 3.8 ~ 5.6 1.5 ~ 2.0 5.6 ~ 7.5
D31E-20 0.8 ~ 1.7 3.2 ~ 6.3 1.7 ~ 2.5 6.3 ~ 9.5 2.5 ~ 3.4 9.5 ~ 12.7
D31EX, PX-21 0.9 ~ 1.8 3.4 ~ 6.8 1.8 ~ 2.7 6.8 ~ 10.2 2.7 ~ 3.6 10.2 ~ 13.6
D37P-5, D37EX, PX-21 0.9 ~ 1.8 3.5 ~ 7.0 1.8 ~ 2.7 7.0 ~ 10.4 2.7 ~ 3.7 10.4 ~ 13.9
D39EX, PX-21 1.1 ~ 2.2 4.1 ~ 8.2 2.2 ~ 3.2 8.2 ~ 12.2 3.2 ~ 4.3 12.2 ~ 16.3
D41E, P-6 1.3 ~ 2.5 4.8 ~ 9.6 2.5 ~ 3.8 9.6 ~ 14.4 3.8 ~ 5.1 14.4 ~ 19.2
D61EX, PX-12, D61EXLT-12 1.7 ~ 3.3 6.3 ~ 12.6 3.3 ~ 5.0 12.6 ~ 18.9 5.0 ~ 6.7 18.9 ~ 25.2
D65E, P-12 2.0 ~ 4.1 7.7 ~ 15.5 4.1 ~ 6.1 15.5 ~ 23.2 6.1 ~ 8.2 23.2 ~ 31.0
D65EX, PX-15 2.1 ~ 4.2 7.9 ~ 15.8 4.2 ~ 6.3 15.8 ~ 23.7 6.3 ~ 8.3 23.7 ~ 31.6
D85E-SS-2A 2.2 ~ 4.4 8.4 ~ 16.8 4.4 ~ 6.7 16.8 ~ 25.2 6.7 ~ 8.9 25.2 ~ 33.6
D85EX, PX-15 2.6 ~ 5.3 10.0 ~ 20.1 5.3 ~ 8.0 20.1 ~ 30.2 8.0 ~ 10.6 30.2 ~ 40.2
D155A-5 3.2 ~ 6.6 12.3 ~ 24.8 6.6 ~ 9.8 24.8 ~ 37.2 9.8 ~ 13.1 37.2 ~ 49.6
D155AX-5 3.4 ~ 6.7 12.7 ~ 25.5 6.7 ~ 10.1 25.5 ~ 38.2 10.1 ~ 13.4 38.2 ~ 50.9
D155A-2A 7.4 ~ 9.2 28 ~ 35 10.0 ~ 11.9 38 ~ 45 12.9 ~ 14.8 49 ~ 56
D275A, AX-5 8.0 ~ 11.3 30.2 ~ 42.7 11.3 ~ 14.6 42.7 ~ 55.3 14.6 ~ 17.9 55.3 ~ 67.9
D375A-5 10.2 ~ 14.4 38.5 ~ 54.5 14.4 ~ 18.7 54.5 ~ 70.6 18.6 ~ 22.9 70.6 ~ 86.6
D475A-3, -3SD 16.5 ~ 23.5 62.8 ~ 88.9 23.5 ~ 30.4 88.9 ~ 115.1 30.4 ~ 37.3 115.1 ~ 141.3
D575A-3 21.0 ~ 29.7 79.5 ~ 112.6 29.7 ~ 38.5 112.6 ~ 145.7 38.5 ~ 47.3 145.7 ~ 178.9
D575A-3SD 22.2 ~ 31.4 83.9 ~ 118.8 31.4 ~ 40.6 118.8 ~ 153.8 40.6 ~ 49.9 153.8 ~ 188.7
Low: Machine movement is mainly consisting of idle running or traveling unloaded.
Medium: Average earth moving, scraper hauling or easy pushing operation.
High: Ripping, heavy pushing, and operation continued without rest at full horsepower.
(3) Pipelayers
Range Low Medium High
Amount U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr.
Machine
D85C-1 2.4 ~ 3.2 9 ~ 12 3.4 ~ 4.2 13 ~ 16 4.2 ~ 5.0 16 ~ 19
D155C-1 3.4 ~ 4.5 13 ~ 17 5.3 ~ 6.3 20 ~ 24 6.9 ~ 7.9 26 ~ 30
D355C-3 4.2 ~ 5.3 16 ~ 20 5.8 ~ 6.9 22 ~ 26 7.4 ~ 8.5 28 ~ 32
18-10
Fuel Consumption OWNING &
OPERATING COSTS
(4) Hydraulic excavators
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
PC12R-8, PC15R-8 0.2 ~ 0.3 0.8 ~ 1.2 0.3 ~ 0.4 1.2 ~ 1.8 0.4 ~ 0.5 1.6 ~ 1.9
PC20R-8, PC20MRx 0.32 ~ 0.45 1.2 ~ 1.7 0.45 ~ 0.55 1.7 ~ 2.1 0.55 ~ 0.6 2.1 ~ 2.3
PC27MRx 0.32 ~ 0.45 1.2 ~ 1.7 0.45 ~ 0.66 1.7 ~ 2.5 0.66 ~ 0.92 2.5 ~ 3.5
PC27R-8 0.4 ~ 0.6 1.6 ~ 2.3 0.6 ~ 0.74 2.3 ~ 2.8 0.74 ~ 0.85 2.8 ~ 3.2
PC35R-8, PC30MRx 0.53 ~ 0.74 2.0 ~ 2.8 0.74 ~ 0.9 2.8 ~ 3.4 0.9 ~ 1.0 3.4 ~ 3.9
PC35MRx 0.32 ~ 0.45 1.2 ~ 1.7 0.45 ~ 0.7 1.7 ~ 2.6 0.7 ~ 1.0 2.6 ~ 3.6
PC45R-8, PC40MRx 0.7 ~ 1.1 2.7 ~ 4.1 1.1 ~ 1.4 4.1 ~ 5.4 1.4 ~ 1.7 5.4 ~ 6.3
PC60-7 0.7 ~ 1.0 2.5 ~ 3.6 1.0 ~ 1.4 3.6 ~ 5.4 1.4 ~ 2.0 5.4 ~ 7.6
PC78US-6, PC78MR-6 0.7 ~ 1.0 2.5 ~ 3.7 1.0 ~ 1.4 3.7 ~ 5.4 1.4 ~ 2.0 5.4 ~ 7.7
PC100-6 1.0 ~ 1.4 3.7 ~ 5.4 1.4 ~ 2.1 5.4 ~ 8.0 2.1 ~ 3.0 8.0 ~ 11.4
PC120-6, PC130-6 1.1 ~ 1.6 4.0 ~ 5.9 1.6 ~ 2.3 5.9 ~ 8.6 2.3 ~ 3.2 8.6 ~ 12.3
PC128US-2 1.1 ~ 1.5 4.0 ~ 5.7 1.5 ~ 2.2 5.7 ~ 8.4 2.2 ~ 3.2 8.4 ~ 12.0
PC138USLC-2 1.1 ~ 1.6 4.1 ~ 5.9 1.6 ~ 2.3 5.9 ~ 8.7 2.3 ~ 3.3 8.7 ~ 12.4
PC158USLC-2 1.3 ~ 1.8 4.8 ~ 6.9 1.3 ~ 2.7 6.9 ~ 10.2 2.7 ~ 3.8 10.2 ~ 14.5
PC160LC-7, PC180LC-7 1.4 ~ 2.0 5.3 ~ 7.7 2.0 ~ 3.0 7.7 ~ 11.2 3.0 ~ 4.2 11.2 ~ 16.0
PC200, LC-7, PC228US, LC-3 1.6 ~ 2.4 6.2 ~ 8.9 2.4 ~ 3.5 8.9 ~ 13.4 3.5 ~ 4.9 13.4 ~ 18.7
PC210, LC-7* 1.6 ~ 2.4 6.2 ~ 8.9 2.4 ~ 3.5 8.9 ~ 13.4 3.5 ~ 4.9 13.4 ~ 18.7
PC220, LC-7 1.9 ~ 2.7 7.1 ~ 10.1 2.7 ~ 4.0 10.1 ~ 15.1 4.0 ~ 5.6 15.1 ~ 21.2
PC240LC,NLC-7 1.9 ~ 2.7 7.1 ~ 10.1 2.7 ~ 4.0 10.1 ~ 15.1 4.0 ~ 5.6 15.1 ~ 21.2
PC270, LC-7, PC290LC-7 2.1 ~ 3.0 8.1 ~ 11.5 3.0 ~ 4.6 11.5 ~ 17.3 4.6 ~ 6.4 17.3 ~ 24.2
PC300, LC-7, PC350, LC-7 2.9 ~ 4.1 10.8 ~ 15.4 4.1 ~ 6.1 15.4 ~ 23.1 6.1 ~ 8.6 23.1 ~ 32.4
PC300SE, HD-7 2.9 ~ 4.1 10.8 ~ 15.4 4.1 ~ 6.1 15.4 ~ 23.1 6.1 ~ 8.6 23.1 ~ 32.4
PC400, LC-6, PC450LC-6 5.2 ~ 6.9 19.6 ~ 26.2 6.9 ~ 8.6 26.2 ~ 32.7 8.6 ~ 13.0 32.7 ~ 49.1
PC450, LC-6* 5.1 ~ 6.8 19.2 ~ 25.6 6.8 ~ 8.5 25.6 ~ 32.0 8.5 ~ 12.7 32.0 ~ 48.0
PC600, LC-6 6.1 ~ 8.1 23.0 ~ 30.6 8.1 ~ 10.1 30.6 ~ 38.3 10.1 ~ 15.2 38.3 ~ 57.5
PC750, LC,SE-6, PC800,SE-6 7.7 ~ 9.8 24.6 ~ 32.9 10.1 ~ 10.9 32.9 ~ 41.1 10.9 ~ 16.3 41.1 ~ 61.6
PC1250, LC, SP-7 9.5 ~ 12.7 36.0 ~ 48.0 12.7 ~ 15.8 48.0 ~ 59.9 15.8 ~ 23.8 59.9 ~ 89.9
PC1800-6 14.6 ~ 19.4 55.2 ~ 73.6 19.4 ~ 24.3 73.6 ~ 92.0 24.3 ~ 36.4 92.0 ~ 138.0
PW100-3 1.9 ~ 2.6 7 ~ 10 2.6 ~ 3.2 10 ~ 12 3.2 ~ 3.4 12 ~ 13
PW130SE-6 1.9 ~ 2.6 7 ~ 10 2.6 ~ 3.2 10 ~ 12 3.2 ~ 3.4 12 ~ 14
PN150SE-6 1.9 ~ 2.7 7.2 ~ 10.3 2.7 ~ 3.2 10.3 ~ 12.3 3.2 ~ 3.8 12.3 ~ 14.4
PW170ES-6 2.1 ~ 3.2 8 ~ 12 3.2 ~ 3.7 12 ~ 14 3.7 ~ 4.2 14 ~ 16
PW210-1 2.6 ~ 3.7 10 ~ 14 3.7 ~ 4.5 14 ~ 17 4.5 ~ 5.0 17 ~ 19
Low: Light utility work, considerable idling. * UK source
Medium: Continuous operation, with frequent periods at idles.
High: Continuous operation at full throttle.
18-11
Fuel Consumption OWNING &
OPERATING COSTS
(5) Off-highway dump trucks
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
HD255-5 3.5 ~ 5.2 13.2 ~19.8 5.2 ~ 6.9 19.8 ~26.3 6.9 ~ 9.6 26.3 ~ 36.2
HD325-6, 5.3 ~ 7.9 20.0 ~ 29.9 7.9 ~ 10.5 29.9 ~ 39.9 10.5 ~ 14.5 39.9 ~ 54.9
HD325-6(4WD)
HD405-6 5.3 ~ 7.9 20.0 ~ 29.9 7.9 ~ 10.5 29.9 ~ 39.9 10.5 ~ 14.5 39.9 ~ 54.9
HD465-7 8.1 ~ 12.2 30.7 ~ 46.0 12.2 ~ 16.2 46.0 ~ 61.4 16.2 ~ 22.3 61.4 ~ 84.4
HD605-7 8.1 ~ 12.2 30.7 ~ 46.0 12.2 ~ 16.2 46.0 ~ 61.4 16.2 ~ 22.3 61.4 ~ 84.4
HD785-5 10.4 ~ 15.5 39.2 ~ 58.8 15.5 ~ 20.7 58.8 ~ 78.4 20.7 ~ 28.5 78.4 ~ 107.8
HD985-5 10.4 ~ 15.5 39.2 ~ 58.8 15.5 ~ 20.7 58.8 ~ 78.4 20.7 ~ 28.5 78.4 ~ 107.8
HD1200-1 12.3 ~ 18.5 46.7 ~ 70.0 18.5 ~ 24.6 70.0 ~ 93.3 24.6 ~ 33.9 93.3 ~ 128.3
HD1500-5 13.7 ~ 17.1 51.8 ~ 64.7 17.1 ~ 23.9 64.7 ~ 90.6 23.9 ~ 32.8 90.6 ~ 124.3
630E 20.7 ~ 26.7 78.4 ~ 100.9 26.7 ~ 36.2 100.9 ~ 137.2 36.2 ~ 49.7 137.2 ~ 188.2
730E 20.7 ~ 26.7 78.4 ~ 100.9 26.7 ~ 36.2 100.9 ~ 137.2 36.2 ~ 49.7 137.2 ~ 188.2
830E 23.0 ~ 30.0 90.8 ~ 113.6 30.0 ~ 42.0 113.6 ~ 159.0 42.0 ~ 57.6 159.0 ~ 218.1
930E-3 25.4 ~ 31.7 96.0 ~ 120.0 31.7 ~ 44.4 120.0 ~ 168.0 44.4 ~ 60.8 168.0 ~ 230.3
CONDITIONS:
Low : Long loading time, downhill on load and good road maintenance.
Medium : Normal loading time, uphill on load (normal grade) and good road maintenance.
High : Short loading time, uphill on load (steep grade) and normal road maintenance.
18-12
Fuel Consumption OWNING &
OPERATING COSTS
(7) Wheel loaders
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
WA80-3,WR8-1 1.1 ~ 1.7 4.3 ~ 6.4 1.6 ~ 2.1 5.9 ~ 8.0 1.9 ~ 2.5 7.5 ~ 9.6
WR11-3 1.1 ~ 2 4 ~ 7.5 2 ~ 2.8 7.5 ~ 10.5 2.5 ~ 3.6 9.5 ~ 13.5
WA120-3 1.5 ~ 2.0 5.5 ~ 7.7 2.0 ~ 2.6 7.7 ~ 9.7 2.6 ~ 3.4 9.7 ~ 12.9
WA180-3 1.9 ~ 2.7 7.2 ~ 10.1 2.7 ~ 3.4 10.1 ~ 12.8 3.4 ~ 4.4 12.8 ~ 16.8
WA250-3 2.2 ~ 3.1 8.4 ~ 11.8 3.1 ~ 3.9 11.8 ~ 14.9 3.9 ~ 5.2 14.9 ~ 19.7
WA320-3 2.7 ~ 3.8 10.3 ~ 14.4 3.8 ~ 4.8 14.4 ~ 18.2 4.8 ~ 6.3 18.2 ~ 24.0
WA320 custom 2.6 ~ 3.7 9.9 ~ 13.9 3.7 ~ 4.6 13.9 ~ 17.5 4.6 ~ 6.1 17.5 ~ 23.2
WA380-3 2.9 ~ 4.1 11.1 ~ 15.5 4.1 ~ 5.2 15.5 ~ 19.6 5.2 ~ 6.8 19.6 ~ 25.9
WA380-5 2.7 ~ 3.8 10.1 ~ 14.2 3.8 ~ 4.7 14.2 ~ 17.8 4.7 ~ 6.2 17.8 ~ 23.5
WA420-3 3.7 ~ 5.2 14.0 ~ 19.6 1.7 ~ 6.5 19.6 ~ 24.7 6.5 ~ 8.6 24.7 ~ 32.7
WA430-5 3.6 ~ 5.0 13.7 ~ 19.1 5.0 ~ 6.4 19.1 ~ 24.2 6.4 ~ 8.4 24.2 ~ 31.9
WA470-3 4.3 ~ 5.9 16.1 ~ 22.5 5.9 ~ 7.5 22.5 ~ 28.4 7.5 ~ 9.9 28.4 ~ 37.6
WA470-5 3.5 ~ 4.8 13.1 ~ 18.3 4.8 ~ 6.1 18.3 ~ 23.0 6.1 ~ 8.0 23.0 ~ 30.3
WA480-5 4.3 ~ 6.0 16.2 ~ 22.7 6.0 ~ 7.6 22.7 ~ 28.6 7.6 ~ 10.0 28.6 ~ 37.8
WA500-3 5.5 ~ 7.7 20.9 ~ 29.2 7.7 ~ 9.7 29.2 ~ 36.8 9.7 ~ 12.9 36.8 ~ 48.7
WA600-3 7.3 ~ 10.2 27.7 ~ 38.7 10.2 ~ 12.9 38.7 ~ 48.9 12.9 ~ 17.1 48.9 ~ 64.6
WA700-3 10.2 ~ 14.2 38.5 ~ 53.9 14.2 ~ 18.0 53.9 ~ 68.0 18.0 ~ 23.7 68.0 ~ 89.8
WA800-3 11.8 ~ 16.5 44.6 ~ 62.5 16.5 ~ 20.8 62.5 ~ 78.9 20.8 ~ 27.5 78.9 ~ 104.2
WA900-3 12.3 ~ 17.2 46.5 ~ 65.1 17.2 ~ 21.7 65.1 ~ 82.1 21.7 ~ 28.7 82.1 ~ 108.5
WA1200-3 28.1 ~ 39.4 106.5 ~ 149.1 28.1 ~ 49.7 149.1 ~ 188.1 49.7 ~ 65.6 188.1 ~ 248.4
CONDITIONS:
Low : Light utility work, considerable idling.
Medium : Non-stop operation, but over longer haul distances, or work on basic loader cycle with frequent
periods at idle.
High : Non-stop operation on basic loader cycle.
18-13
Fuel Consumption OWNING &
OPERATING COSTS
(9) Motor graders
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
GD510R-1 1.8 ~ 2.9 6.7 ~ 10.8 2.9 ~ 3.9 10.8 ~ 14.8 3.9 ~ 5.0 14.8 ~ 18.8
GD511A-1 1.9 ~ 3.1 7.3 ~ 11.6 3.1 ~ 4.2 11.6 ~ 16.0 4.2 ~ 5.4 16.0 ~ 20.3
GD555-3A 2.0 ~ 3.1 7.4 ~ 11.8 3.1 ~ 4.3 11.8 ~ 16.3 4.3 ~ 5.5 16.3 ~ 20.7
GD555-3C 2.2 ~ 3.6 8.5 ~ 13.5 3.6 ~ 4.9 13.5 ~ 18.6 4.9 ~ 6.3 18.6 ~ 23.7
GD611A-1 2.1 ~ 3.3 7.9 ~ 12.6 3.3 ~ 4.6 12.6 ~ 17.4 4.6 ~ 5.8 17.4 ~ 22.1
GD655-3A 2.3 ~ 3.7 8.7 ~ 13.9 3.7 ~ 5.0 13.9 ~ 19.1 5.0 ~ 6.4 19.1 ~ 24.3
GD655-3C 2.6 ~ 4.1 9.8 ~ 15.7 4.1 ~ 5.7 15.7 ~ 21.6 5.7 ~ 7.3 21.6 ~ 27.5
GD661A-1 2.5 ~ 4.1 9.6 ~ 15.4 4.1 ~ 5.6 15.4 ~ 21.2 5.6 ~ 7.1 21.2 ~ 26.9
GD675-3A 2.6 ~ 4.1 9.7 ~ 15.6 4.1 ~ 5.7 15.6 ~ 21.4 5.7 ~7.2 21.4 ~ 27.2
GD675-3C 2.9 ~ 4.5 10.8 ~ 17.2 4.5 ~ 6.3 17.2 ~ 23.7 6.3 ~ 8.0 23.7 ~ 30.1
GD705A-4 2.8 ~ 4.4 10.5 ~ 16.8 4.4 ~ 6.1 16.8 ~ 23.1 6.1 ~ 7.8 23.1 ~ 29.4
GD825A-2 4.0 ~ 6.5 15.3 ~ 24.5 6.5 ~ 8.9 24.5 ~ 33.7 8.9 ~ 11.3 33.7 ~ 42.9
CONDITIONS:
Low: Minor repair, leveling, and traveling without load.
Medium: Average road maintenance job, scarifying operation and light duty snow-removal.
High: Ditch-digging, grading the surface and heavy-duty operation such as ripping.
(10) Compactors
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
JV100 series
CONDITIONS:
Low: Light dozing and compacting.
Medium: Normal dozing and compacting.
High: Heavy dozing and compacting on heavy material.
18-14
Lubricant Consumption OWNING &
OPERATING COSTS
Table 4 Approx. Hourly Lubricants Consumption
(1) Bulldozers and Dozer shovels
Hydraulic
Application *(1) Crank case *(2) Transmission *(3) Final Drives Grease
Control
Unit QTY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
D21A, E, P-7 0.005 0.02 0.008 0.03 0.003 0.01 0.005 0.02 0.04 0.02
D31E-20 0.005 0.02 0.016 0.06 0.005 0.02 0.008 0.03 0.04 0.02
D31EX, PX-21 0.008 0.03 0.003 0.01 0.008 0.03 0.04 0.02
D37P-5 0.008 0.03 0.003 0.01 0.008 0.03 0.04 0.02
D37EX, PX-21 0.008 0.03 0.003 0.01 0.008 0.03 0.04 0.02
D39EX, PX-21 0.008 0.03 0.003 0.01 0.008 0.03 0.04 0.02
D41E, P-6 0.021 0.08 0.026 0.1 0.005 0.02 0.011 0.04 0.04 0.02
D61EX, PX-12 0.016 0.06 0.016 0.06 0.003 0.01 0.008 0.03 0.04 0.02
D65E, EX, P, PX-12 0.021 0.08 0.013 0.05 0.013 0.05 0.008 0.03 0.04 0.02
D65EX, PX-15 0.021 0.08 0.013 0.05 0.013 0.05 0.008 0.03 0.04 0.02
D85E-SS-2A 0.021 0.08 0.013 0.05 0.016 0.06 0.008 0.03 0.04 0.02
D85EX, PX-15 0.021 0.08 0.016 0.06 0.016 0.06 0.008 0.03 0.04 0.02
D155A-5 0.021 0.08 0.016 0.06 0.032 0.12 0.013 0.05 0.07 0.03
D155AX-5 0.021 0.08 0.016 0.06 0.032 0.12 0.013 0.05 0.07 0.03
D155A-2 0.04 0.15 0.037 0.14 0.029 0.11 0.026 0.10 0.07 0.03
D275AX-5, D275A-5 0.029 0.11 0.024 0.09 0.011 0.04 0.018 0.07 0.09 0.04
D375A-5 0.032 0.12 0.04 0.15 0.019 0.07 0.016 0.06 0.09 0.04
D475A-3 0.066 0.25 0.055 0.21 0.021 0.08 0.019 0.07 0.09 0.04
D575A-3 0.137 0.52 0.093 0.35 0.042 0.16 0.04 0.15 0.13 0.06
D31S, Q-20 0.005 0.02 0.016 0.06 0.005 0.02 0.008 0.03 0.022 0.01
D57S-1 0.029 0.11 0.024 0.09 0.008 0.03 0.016 0.06 0.022 0.01
D57S-5 0.029 0.11 0.032 0.12 0.013 0.05 0.018 0.07 0.044 0.02
*(1) Includes lubricant oil of compressor for Portable Air Compressor
*(2) Includes oils in the torque converter, main clutch and steering cases, differential, etc.
*(3) Includes oils in the tandem case of Motor Grader.
18-15
Lubricant Consumption OWNING &
OPERATING COSTS
18-16
Lubricant Consumption OWNING &
OPERATING COSTS
(4) Wheel loaders and Wheel dozers
*(4) Hydraulic
Application *(1) Crank case *(2) Transmission *(3) Final Drives Grease
Control
Unit QTY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
WA80-3 0.008 0.03 0.003 0.01 0.008 0.03 0.02 0.01
WA120-3 0.013 0.05 0.005 0.02 0.005 0.02 0.011 0.04 0.02 0.01
WA180-3 0.013 0.05 0.008 0.03 0.005 0.02 0.011 0.04 0.02 0.01
WA250-3 0.013 0.05 0.008 0.03 0.005 0.02 0.011 0.04 0.02 0.01
WA320-3 0.032 0.12 0.011 0.04 0.008 0.03 0.016 0.06 0.02 0.01
WA380-3 0.032 0.12 0.011 0.04 0.011 0.04 0.019 0.07 0.02 0.01
WA380-5 0.019 0.07 0.016 0.06 0.011 0.04 0.019 0.07 0.02 0.01
WA420-3 0.032 0.12 0.016 0.06 0.016 0.06 0.019 0.07 0.02 0.01
WA430-5 0.019 0.07 0.016 0.06 0.011 0.04 0.019 0.07 0.02 0.01
WA470-3 0.037 0.14 0.016 0.06 0.019 0.07 0.021 0.08 0.02 0.01
WA470-5, WA480-5 0.021 0.08 0.016 0.06 0.016 0.06 0.026 0.10 0.02 0.01
WA500-3 0.04 0.15 0.032 0.12 0.021 0.08 0.024 0.09 0.04 0.02
WA600-3 0.045 0.17 0.029 0.11 0.034 0.13 0.048 0.18 0.04 0.02
WA700-3 0.058 0.22 0.029 0.11 0.066 0.25 0.066 0.25 0.06 0.03
WA800-3 0.071 0.27 0.034 0.14 0.095 0.36 0.10 0.37 0.09 0.04
WA900-3 0.071 0.27 0.034 0.14 0.095 0.36 0.10 0.37 0.09 0.04
WA1200-3 0.275 1.04 0.092 0.35 0.22 0.83 0.16 0.60 0.18 0.08
WD420-3 0.032 0.12 0.016 0.06 0.016 0.06 0.019 0.07 0.02 0.01
WD500-3 0.04 0.15 0.032 0.12 0.021 0.08 0.024 0.09 0.04 0.02
WD600-3 0.06 0.20 0.04 0.12 0.03 0.11 0.03 0.11 0.04 0.02
WD900-3 0.071 0.27 0.034 0.14 0.095 0.36 0.10 0.37 0.09 0.04
*(1) Includes lubricant oil of compressor for Portable Air Compressor
*(2) Includes oils in the torque converter, main clutch and steering cases, differential, etc.
*(3) Includes oils in the tandem case of Motor Grader
*(4) Includes oils in the brake cooling tank
18-17
Tire Life OWNING &
OPERATING COSTS
Table 4 Approximate Tire Life
Machine Easy Condition Medium Condition Severe Condition
Off-Highway Dump Trucks 4,000 ~ 6,000 2,000 ~ 4,000 1,000 ~ 2,000
Articulated Dump Trucks 7,000 5,000 3,000
Motor Graders 3,000 2,000 1,000
Wheel Loaders 4,000 ~ 6,000 2,000 ~ 4,000 1,000 ~ 2,000
Wheel Dozers 3,000 2,000 1,000
Hydraulic Excavators 3,000 2,000 1,000
Traveling on well- Traveling on gravelly
maintained roads, or in silt surfaces, tire wear is normal Tire wear mostly due to
rock-cut, liable to puncture
but occasionally
or sand, tire wear is normal. rocks. cut by frequently.
The life varies with brand and material. Tires may be used above or below the tire life expectancy given in this
table.
18-18
Optimum Fleet Recommendation (OFR) OWNING &
Software Program OPERATING COSTS
Optimum Fleet Recommendation (OFR) software program is available for Komatsu distributors.
The OFR is able to simulate and recommend optimum fleet for the targeted production with followings.
1. Machine selection based on site conditions and target of production.
2. Estimation of each machines production.
3. Estimation of owning and operating costs.
4. Estimation of production cost.
Computer processing
Report contents
1. Production condition, object material, cost data
2. Optimum machine combination
3. Production
4. Number of units
5. Production cost
For Customer;
Please contact the nearest Komatsu distributor with your specific conditions, application and
requirements.
18-19
Komatsu Information on OWNING &
Reliability and Durability OPERATING COSTS
About Repair and Maintenance Cost Estimation
Repair and Maintenance cost is a part of the owning and operating cost.
Repair and Maintenance cost estimating software is available for Komatsu distributors.
The system is called KIRD (Komatsu Information on Reliability and Durability).
By using the KIRD, we can calculate Repair and Maintenance cost for Komatsu large sized equipment with
local conditions such as followings.
1. Parts price (Each country has different import duty, transportation charge and etc.)
2. Hourly labor charges
3. Lubricants prices
4. Repairing methods (Repair option)
Rebuild
REMAN (Komatsu component exchange)
5. Man- hours
6. Component and system replacement intervals per operating conditions
Kind of job
Environments
Handling materials
Operating methods
For Customer;
Please contact the nearest Komatsu distributor with your specific model, application and requirements.
18-20
CONTENTS
INDEX
SECTION 19
OTHER
CONTENTS
Unit conversion tables .............................................19-2
19-1
Unit Conversion Tables OTHER
a. Length
Centimeter Meter (m) Inch (in) Foot (ft) Yard (yd) Mile (M) Kilometer
(cm) (km)
1 0.01 0.3937 0.03281 0.01094 1 1.6093
100 1 39.37 3.281 1.0936 0.6214 1
2.540 0.0254 1 0.8333 0.02778
30.48 0.3048 12 1 0.3333
91.44 0.9144 36 3 1
b. Space
Sq. meter (m2) Sq. Inch (in2) Sq. foot (ft2) Sq. yard (yd2)
1 1550 10.764 1.1960
0.036452 1 0.026944 0.037716
0.09290 144 1 0.11111
0.8361 1296 9 1
c. Volume
Cu. Cu. inch(in3) Cu. foot(ft3) Cu. Imperial Gal U.S. Gal Cu. Inch Liter
meter(m3) yard(yd3)
1 61024 35.31 1.3079 1 1.201 177.4 4.546
0.041639 1 0.035787 0.042143 0.8327 1 231 3.785
0.02832 1728 1 0.037037 0.023605 0.024329 1 0.01639
0.76455 46656 27 1 0.2200 0.2642 61.02 1
d. Weight
Kilogram (kg) Pound (lb) Metric Ton Short Ton Long Ton Newton (N)
(French Ton) (U.S. Ton) (English Ton)
1 2.2046 0.001 0.0011023 0.039842 9.80665
0.4536 1 0.034536 0.035 0.034464 4.448
1000 2204.6 1 1.1023 0.9842 9806.65
907.1 2000 0.9072 1 0.8929 8896.5
1016 2240 1.016 1.120 1 9964
0.10197 0.2248 0.031019 0.031124 0.031004 1
e. Pressure
f. Velocity
m/sec km/h ft/sec. MPH
1 3.6 3.281 2.237
0.2778 1 0.9113 0.6214
0.3048 1.097 1 0.6818
0.4470 1.609 1.467 1
19-2
Unit Conversion Tables OTHER
g. Horsepower
PS HP kW kg.m/s kCal
1 0.986 0.736 75 0.1757
1.014 1 0.746 76.07 0.1782
1.3592 1.3405 1 101.97 0.2389
0.01333 0.01315 0.009807 1 0.002343
5.6902 5.611 4.186 426.9 1
h. Torque
kg.m ft.lb N.m
1 7.233 9.807
0.1383 1 1.356
0.1020 0.7375 1
i. Temperature
32F = 0C, 459.67F = 273.15C, 1F = 0.5556C
F C F C F C F C
450 267.78 5 15.00 55 12.78 150 65.56
400 240.00 10 12.22 60 15.56 200 93.33
350 212.22 15 9.44 65 18.33 250 121.11
300 184.44 20 6.67 70 21.11 300 148.89
250 156.67 25 3.89 75 23.89 350 176.67
200 128.89 30 1.11 80 26.67 400 204.44
150 101.11 35 1.67 85 29.44 450 232.22
100 73.33 40 4.44 90 32.22 500 260.00
50 45.56 45 7.22 95 35.00 550 287.78
0 17.78 50 10.00 100 37.78 600 315.56
F 1 2 3 4 5 6 7 8 9
C 0.556 1.111 1.667 2.222 2.778 3.333 3.889 4.444 5
Example: To convert 92F into C
90F = 32.22C, 2F = 1.111C, 90F+2F = 33.33C
19-3
Unit Conversion Tables OTHER
j. Angles of Gradient
o
45
= 100%
19-4
INDEX
CONTENTS
A B
Air dryer ............................................................... 7A-38 Beads ..................................................................... 15-6
Altitude deterioration...............................................14-6 Bench height ........................................................3A-94
Angle dozer ........................................................... 1B-2 Blade accumulator.................................................. 8-18
Arm crowd force .................................................. 3A-75 Blade availability.....................................................1B-3
Asphalt debris.......................................................11A-4 Blade fill factor.......................................... 1B-16, 17A-4
Asphalt-pavement profiling method ..................... 13B-3 Blade float .............................................................. 8-19
Attachment availability Blade selection .......................................................1B-2
Motor graders ...................................................... 8-8 Body extension.....................................................7A-37
Wheel loaders............................................... 4A-109 Body liner .............................................................7A-37
Attachments of excavator Body selection ......................................................7A-42
Aqua-digger .................................................... 13E-8 Bolt-on teeth ....................................................... 4A-118
Car scrap handler ........................................... 3D-10 Bolt-on cutting edge ........................................... 4A-118
Clamshell buckets............................................. 3D-3 Brake performance curve
Concrete jumbo crusher ................................13A-11 HD255-5 .......................................................... 7A-11
Ditch cleaning buckets...................................... 3D-2 HD325-6 ..........................................................7A-13
Power fork II.................................................. 13A-13 HD325-6 4WD .................................................7A-15
High-mount cab .............................................. 13E-6 HD405-6 ..........................................................7A-17
Hydraulic breaker.............................................. 3D-8 HD465-7 ..........................................................7A-19
Hydraulic crusher............................................ 13A-8 HD605-5 ..........................................................7A-21
Hydraulic crusher & cutter .............................. 13A-8 HD785-5 ..........................................................7A-23
Hydraulic cutter & smasher............................. 13A-7 HD985-5 ..........................................................7A-27
Hydraulic shin-shear ....................................... 13A-9 HD1200-1 ........................................................7A-29
Hydraulic smasher ........................................ 13A-10 HD1500-5 ........................................................7A-30
Lifting magnet ................................................. 3D-10 630E ................................................................7A-31
Magnet fork..................................................... 3D-12 730E ................................................................7A-32
Offset boom ...................................................... 3D-6 830E ................................................................7A-33
Orange grapple............................................... 3D-12 930E-2 .............................................................7A-34
Ripper buckets.................................................. 3D-2 Breaker................................................................... 15-5
Road ripper ....................................................... 3D-7 Breakout force ....................................................4A-106
Rotary log grapple ............................................ 3D-9 Bucket and arm combinations
Scrap grapple ................................................. 3D-12 Excavators, backhoes .....................................3A-76
Scrap handling machine ..................................3D-11 Wheel-type excavators .................................... 3F-10
Single-shank rippers ......................................... 3D-2 Bucket capacity ..................................................4A-106
Slope finishing buckets ..................................... 3D-2 Bucket capacity definition.....................................3A-73
Spike hammer................................................... 3D-6 Bucket capacity rating ..........................................3A-73
Super long ...................................................... 13A-4 Bucket digging force.............................................3A-75
Super long front ................................................ 3D-6 Bucket fill factor
Telescopic arm (box type)................................. 3D-4 Crawler-type dozer shovels ............................... 2-12
Telescopic arm (sliding type) ............................ 3D-6 Excavators, backhoes ...................................3A-101
Telescopic arm and 2-piece boom .................... 3D-5 Wheel loaders................................................4A-154
Three-shank rippers.......................................... 3D-3 Bucket features .................................................. 4A-114
Vibratory pile driver........................................... 3D-7 Bucket selection
Trapezoidal buckets.......................................... 3D-2 Excavators, backhoes .....................................3A-74
Attachments of motor grader Wheel loaders................................................ 4A-119
Front dozer blade...............................................8-12 Bucket width .........................................................3A-75
Rear mounted ripper..........................................8-13
Scarifier................................................................ 8-9 C
Attachments of wheel loader Calculation of production......................................17A-2
Dumping fork spec........................................ 4A-136 Carcass .................................................................. 15-6
High lift boom spec. ...................................... 4A-146 Carry position .....................................................4A-108
Log grapple spec. ......................................... 4A-138 Chip bucket ........................................................ 4A-114
Lumber fork spec. ......................................... 4A-137 Coal dozer ..............................................................1B-2
Lumber grapple spec. ................................... 4A-135 Component dimensions and weights
Multi-purpose bucket spec............................ 4A-131 Excavators, backhoes .....................................3A-47
Attachment and options Hydraulic loading shovels..................................3E-7
Motor grader ......................................................8-16 Concrete debris .................................................... 11A-4
Off high-way dump truck ................................. 7A-35 Cone index numbers (qc) ...................................17B-10
Automatic three-mode suspension ...................... 7A-36 Conventional tire .................................................... 15-5
Automatic retarding spec control ......................... 7A-36 Conversion tables................................................... 19-2
Correct usage....................................................... 15-11
Cross loading .......................................................17A-6
INDEX-1
INDEX
INDEX-2
INDEX
INDEX-3
INDEX
U
U-tiltdozer .............................................................. 1B-2
Use of brake performance curve ......................... 7A-10
Use of travel performance curve
Off-highway dump trucks ................................ 7A-10
Upper attachment
Crawler type tractors....................................... 1A-23
Motor graders .................................................... 8-14
INDEX-4