Professional Documents
Culture Documents
This page covers timers used in GSM which include T100, T200, T301, T3126,
T3146, T3182, T3190, T3192, T3124, T3230 and T3330.
Timer Function/value
It helps detect presence of the GSM radio Link by checking SACCH frames every 48
T100 (Radio link timeout)
(Alerting or ringing timer); this timer limits the time user need to answer to an incomi
T301 (Value: 20 sec)
When this timer T3126 expires immediate assignment procedure is aborted. Starting
T3126 same as timer T3146 mentioned below.
Started when MS transmits final Uplink data block. If Uplink packet ACK is received
fine, if not and timer expires and with N3102>0; MS releases resources and attempt
T3182 establish communication on the cell again.
Called TBF release timer, when T3192 expires UE (mobile) releases TBF related res
T3192 begins scanning paging channel.
It is stated to wait for physical handover information from the network. It is stopped w
Information message is received at UE. It expires after waiting typical value of 320m
T3124 physical information is not received.
RAU(Routing Area Update) request timer,expires when default value set (typically-1
passed.Usually either RAU accept or RAU reject is sent by network to the UE upon
T3330 RAU request.