You are on page 1of 4

Hiller 1

PROBLEMS Current situation

The S7300 CPU loses communication with the main panel we reconnected the same MPI
and you can't operate the machine connector
We removed the MPI network cables

The Air Condition indicates 2 alarms (A017 and A018) Requires repair
currently is inoperative

The flowmeter is not operational The flowmeter of the machine 3 has been put
Currently repair into the machine 1

The analog module that receives the signal from the A new module is installed and also we installed
temperature of the bearings is damaged fuses of 32mA for each analog input
HILLER 2
PROBLEMS Current situation

The S7300 CPU loses communication with the main we reconnected the same MPI
panel and you can't operate the machine connector

We removed the MPI network cables


The Air Condition indicates 2 alarms (A07) currently Requires repair
is inoperative
HILLER 3

PROBLEMS Current situation

The inverter of hydraulic unit has moved to the Currently without inverter
machine hiller1

The inverter of the bowl is inoperative Currently repair

El flujometro de la maquina 3 se traslad a la Currently without flowmeter


maquina 1

The analog input module temperature bearings are Currently without module temperature
damaged We installed fuses of 32mA for each analog
input.

The temperature sensors rtd, pt100 type are require replenished


damaged.

You might also like