Professional Documents
Culture Documents
Superior Tank Co., Inc. is pleased to offer the following quotation for your consideration.
To furnish Materials to Fabricate & Coat the following:
Tank 1) ONE (1) 141,016 USG. (534 M3) 2- Rings, Center Pole 1:12 Supported Steel Cone Roof,
Flat Steel Floor, NFPA-22 100 MPH Wind load, 10 PSF Deck Live Load, Seismic Zone 4 Factory
Powder Coated, throughout with 5 mil minimum average dry film thickness using DuPont
"Tank Tan" a Thermal Set Epoxy Powder Coating on Tank Interior and 3 mil minimum, average
dry film thickness using DuPont "Superior White", a Thermal Set TGIC Polyester Powder
Coating on Tank Exterior, 38- 7 5/8" Diameter. x 16- 1 Height Bolted Steel Storage Tank, with
the following appurtenances:
HARDWARE: Plastic Encapsulated Head Bolts for Interior, Galvanized Hardware Exterior, and
EPDM gasket used throughout. *Encapsulated Bottom Nuts are INCLUDED.*
Tank 2) ONE (1) 53,359 USG. (202 M3) 2- Rings, Center Pole 1:12 Supported Steel Cone Roof,
Flat Steel Floor, AWWA D-103 97 100 MPH Wind load, 10 PSF Deck Live Load, Seismic Zone 4
Factory Powder Coated, throughout with 5 mil minimum average dry film thickness using
DuPont "Tank Tan" a Thermal Set Epoxy Powder Coating on Tank Interior and 3 mil minimum,
average dry film thickness using DuPont "Superior White", a Thermal Set TGIC Polyester Powder
Coating on Tank Exterior, 23- 9 5/16" Diameter. x 16- 1 Height Bolted Steel Storage Tank,
with the following appurtenances:
HARDWARE: Plastic Encapsulated Head Bolts for Interior, Galvanized Hardware Exterior, and
EPDM gasket used throughout. *Encapsulated Bottom Nuts are INCLUDED.*
Tank 3) ONE (1) 43,841 USG. (166 M3) 2- Rings, Center Pole 1:12 Supported Steel Cone Roof,
Flat Steel Floor, AWWA D-103 97 100 MPH Wind load, 10 PSF Deck Live Load, Seismic Zone 4
Factory Powder Coated, throughout with 5 mil minimum average dry film thickness using
DuPont "Tank Tan" a Thermal Set Epoxy Powder Coating on Tank Interior and 3 mil minimum,
average dry film thickness using DuPont "Superior White", a Thermal Set TGIC Polyester Powder
Coating on Tank Exterior, 21- 6 1/2" Diameter. x 16- 1 Height Bolted Steel Storage Tank, with
the following appurtenances:
HARDWARE: Plastic Encapsulated Head Bolts for Interior, Galvanized Hardware Exterior, and
EPDM gasket used throughout. *Encapsulated Bottom Nuts are INCLUDED.*
CLARIFICATIONS
A.- Foundation designed by others. All foundation work shall be by others.
B.- Unless noted, Superior Tank Co. has quoted our standards for design,
fabrication, ladders, guardrails and coatings.
C.- Superior Tank Co., terms and conditions are applicable.
D.- Order is not Placed until Drawings have been Approved.
Thank you for the opportunity to be of service. If you have any questions or require
additional information, please do not hesitate to contact me at your earliest convenience.
Sincerely,
Hector J. Chah.