EC2— worked examples 638
EXAMPLE 6.14, 3500 kN concentrated load [EC2 clause 6.5]
3500 EN load on a 800300 rectangular column by 2 3002250 mum cushion
Maecials:
concrete €30/37 £,= 30 MPa,
steel Bs50C = 450MPaB, = 200000MPs
85h _ 0.85-30
= 391.3 N/mm?
£, = 80
so TS 115
Joading axes
A= 300-250 = 75000 mun”
dimensions of the load distribution acea
by = 3 by = 3-250 = 750 mm
maximal load distibution area
‘Ag, = 900-750 = 675000 man?
oad distribution height
hz (b, —b,)= 750-251
$00 mum
= b= 600mm
900-300 = 600 mm
‘Ultimate compressive stress
Faas = AcfaAg Ag = 75000-17-f675000/ 75000 = 3825 EN <
£3.0 fgg =3.0-17-75000 = 3.825-10" N
Te is worth to observe that the Fya, upper limit corcespondls to the the maximal value Aq
‘Ag for the load distibution area, just as in this example; the 3500KN load results to be lower
than Fig
Reinforcement design
Point [6.7(4)-EC2] recommends the use of a suitable seinfoscement capable to sustain the
‘uansversal shrinkage stresses and point (6.1(I)P-EC2] sends the reader to pasagraph [(6.5)-
C2] to analyse this topic
In this case there isa partial discontinuity, because the strut width (500 mm) is lower than the
distribution height (600 mm), thes:
250 mmEC2—worked examples
639
b =500 mm
3500 500-250
4 500
37.5 ON
the steel acca required to casey T is: