This procedure outlines an experiment to measure the reflection of light rays off a plane mirror at different angles of incidence. The experiment involves positioning a laser beam at angles of 100, 200, 300, 400, and 500 relative to the mirror's normal line and measuring the corresponding angle of reflection, repeating each measurement three times to get an average. Materials needed are a plane mirror, laser, and paper protractor.
This procedure outlines an experiment to measure the reflection of light rays off a plane mirror at different angles of incidence. The experiment involves positioning a laser beam at angles of 100, 200, 300, 400, and 500 relative to the mirror's normal line and measuring the corresponding angle of reflection, repeating each measurement three times to get an average. Materials needed are a plane mirror, laser, and paper protractor.
This procedure outlines an experiment to measure the reflection of light rays off a plane mirror at different angles of incidence. The experiment involves positioning a laser beam at angles of 100, 200, 300, 400, and 500 relative to the mirror's normal line and measuring the corresponding angle of reflection, repeating each measurement three times to get an average. Materials needed are a plane mirror, laser, and paper protractor.
vertically along the edge of the paper protractor. 2. Position the laser beam such that it hits the mirror at an angle of 10 with the normal line. Measure the angle between the reflected ray and the normal line. 3. Make three trials and get the average. 4. Repeat steps 2 to 4 for angles 20, 30, 40, 50. MATERIALS: 1 Plane Mirror 1 low-frequency laser 1 paper protractor Make a diagram on the reflection of a light ray on a plane mirror. - Normal line Label the ff. - Incident ray - Reflected ray - Angle of incident - Angle of reflection How does the angle of incidence compare with the angle of reflection?