Professional Documents
Culture Documents
GE Security: Fire System Accessories Product Catalogue
GE Security: Fire System Accessories Product Catalogue
GE Security
www.GE-Security.com
GE Security
Technical Data
Protection IP54
Housing ABS
Operating temperature -20C to +50C
Dimensions 300 x 150 x 110 mm
Ordering Information
General
Technical Data
Ordering Information
The FASD710 provides a low cost solution for aspiration systems using point
smoke detectors. The controller can be used in many applications where point
smoke detectors are not suitable. The powerful pump allows pipe distances of
up to 50 metres
Technical Data
Ordering Information
z FASD710
z 2 detectors for redundancy and mixed detection strategy.
z Up to 50 metres pipe
z Cartridge air filter
z Bar graph indication of flow
z high / low flow fault and remote reporting
z IP65 rating
z Hotels
z Banks
z Hospitals
z Livestock Buildings
z Prisons
z Underground stations
z Aesthetic environments
z Harsh environments
z Dirty environments
Aspiration Systems
Page 5
Compact and powerful, the FHSD720 has all the detection and monitoring
features of big aspiration systems. It is ideal for monitoring localised areas
up to 850m. All data can be uploaded or downloaded via the standard RS232
or RS485 ports
Technical Data
z IP65
Ordering Information z RS232 and RS485 standard
FHSD720 Localised aspirated early warning smoke detection system z High Power Pump
FHSD720RL Relay Module 4 Channel for FHSD72x
z High sensitivity laser detector
FHSD732 Single channel remote display & programmer
FHSD733 Remote display repeater unit - 16 units z Four alarm levels
FHSD751 Filter+ with filter element - harsh environment
FHSD754 Replacement filter element for the FHSD751 z Remote display units
FHSD771 Large bore red pipe 3 metre length z 24V operation
FHSD772 Straight union large bore
FHSD773 90 deg. bend for large bore pipes z Fault monitoring
FHSD774 45 deg. elbow for large bore pipes
FHSD775 End cap for large bore pipes
z Small EDP rooms
z Server rooms
z Escalators
z Machine protection
Aspiration Systems
Page 6
Four pipe, one address aspirated early warning smoke detection system FHSD721
The FHSD721 and FHSD721D four pipe aspirating laser detector system
provides very early warning to smoke over a very large area. Each pipe can be
up to 100 metres long. The FHSD721D is complete with display, programmer
and web server.
Technical Data
Four channel four area aspirated early warning smoke detection system FHSD724D
The FHSD724 four channel large bore aspirating laser detector system
provides very early warning to smoke over a very large area. Each pipe can be
up to 100 metres long. The unit is complete with display and programmer.
Technical Data
Six channel six area aspirated early warning smoke detection system FHSD726
The FHSD726 six channel large bore aspirating laser detector system provides
very early warning to smoke over a very large area. Each pipe can be up to 100
metres long. An environmental detector is also available
Technical Data
15 Channel Micro bore aspirated early warning smoke detection system FHSD7215D
Selective detection
Technical Data
A 230V power supply, battery charger and battery container for the FHSD721,
FHSD724, FHSD726, and FHSD7215 apiration systems. The power supply is
easily mounted in the units.
Ordering Information
This four way relay module extends the outputs of the FHSD72x aspiration
systems. It is plug-in installable.
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Ordering Information
A three stage filter with course, medium, and fine filters for micro-bore
systems
Ordering Information
Ordering Information
Replacement filter element set - medium / fine for the FHSD753 FHSD755
Ordering Information
FHSD755 Replacement filter element set - medium / fine for the FHSD753
Aspiration Systems
Page 15
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Scintered end of line filter for micro bore 6mm tube FHSD764
Ordering Information
FHSD764 Scintered end of line filter for micro bore 6mm tube
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Technical Data
Supply Voltage 12 - 30 V dc
Supply current 3 mA quiescent
Relay contact ratings 1A @ 30 V dc (resistive load)
Field of view Up to 120
Spectral response (UV) 185 to 260 nm
Operating temperature -10C - 60C
Relative Humidity 95% Non condensing
Weight 150 g (including base)
Ordering Information
UV flame detector self contained with fire and fault relays FF713
Technical Data
Supply Voltage 12 - 30 V dc
Supply current 4 mA
Relay contact ratings 1A @ 30 V dc (resistive load)
Field of view Up to 120
Spectral response (UV) 185 to 260 nm
Operating temperature -10C - 60C
Relative Humidity 95% Non condensing
Weight 655 g
Ordering Information
FF713 UV flame detector self contained with fire and fault relays
Technical Data
Supply Voltage 12 - 30 V dc
Supply current 3 mA quiescent
Relay contact ratings 1A @ 30 V dc (resistive load)
Field of view Up to 120
Spectral response (UV) 185 to 260 nm
Operating temperature -10C - 60C
Relative Humidity 95% Non condensing
Weight 2.2 kg
Ordering Information
Technical Data
Supply Voltage 17 - 30 V dc
Supply current 67A
Relay contact ratings 1A @ 30 V dc (resistive load)
Field of view 100
Spectral response (IR) Near 4.3um
Operating temperature -10C - 60C
Relative Humidity 95% Non condensing
Weight -
Ordering Information
Technical Data
Supply voltage 14 - 28 V dc
Supply current 3/9, 4/8/14, 4-20, 8-20 mA
Relay contact ratings 1 A @ 30 V dc (resistive load)
Field of view 90 min. cone
Spectral response (IR) 1.0 to 2 m
Operating temperature -10C to 55C
Storage temperature -20C to 65C
Relative humidity 95%; non-condensing
IP Rating IP64 poly carbonate box
IP65 die-cast zinc alloy box
IP66 flame proof box
Weight 1 kg die-cast zinc ally box
2 kg flame proof box
Ordering Information
FF741 Dual IR flame detector in glass reinforced polycarbonate housing z Dual IR and UV/Dual IR models
FF742 Dual IR flame detector in die-cast zinc alloy housing
FF746 Dual IR flame detector in Eexd - IIC T6 flame proof housing z High specification units for critical applications
FF747 Dual IR Intrinsic safe flame detector in die-cast zinc alloy housing z IP65 Housing available
z Flame proof and Intrinsic safe models
z Low current consumption
z 2 Wire, 4 - 20 mA and relay operation
z Latching and non latching operation
z High / Low sensitivity setting
z Versatile mounting brackets
z Tolerance to detector window contamination
z Versatile, adjustable test torch available
z Remote self test facility
z Microprocessor controlled
z Immunity to false sources (arc welding, lightning and static)
z Conforms to EN54: Part 10
Flame Detectors
Page 26
Technical Data
Supply voltage 14 - 28 V dc
Supply current 3/9, 4/8/14, 4-20, 8-20 mA
Relay contact ratings 1 A @ 30 V dc (resistive load)
Field of view 90 min. cone
Spectral response (IR) 1.0 to 2 m
Operating temperature -10C to 55C
Storage temperature -20C to 65C
Relative humidity 95%; non-condensing
IP Rating IP64 poly carbonate box
IP65 die-cast zinc alloy box
IP66 flame proof box
Weight 1 kg die-cast zinc ally box
2 kg flame proof box
Ordering Information
FF751 UV / Dual IR flame detector in die cast zinc alloy housing z Dual IR and UV/Dual IR models
FF756 UV / Dual IR flame detector in Eexd - IIC T6 flame proof housing
z High specification units for critical applications
z IP65 Housing available
z Flame proof and Intrinsic safe models
z Low current consumption
z 2 Wire, 4 - 20 mA and relay operation
z Latching and non latching operation
z High / Low sensitivity setting
z Versatile mounting brackets
z Tolerance to detector window contamination
z Versatile, adjustable test torch available
z Remote self test facility
z Microprocessor controlled
z Immunity to false sources (arc welding, lightning and static)
z Conforms to EN54: Part 10
Flame Detectors
Page 27
A microproccessor universal test torch that can test all FF700 series flame
detectors. It emits various channels of infra-red to test dual IR detectors. It
also can emit 'flickering' IR to test for false alarms.
Ordering Information
Ordering Information
A weather shield that can be used for most FF700 flame detectors
Ordering Information
Technical Data
Technical Data
Ordering Information
z Area coverage up to 600 m 2 per unit
FD705R Reflective beam smoke detector 5 - 50m
FD710R Reflective beam smoke detector; 50 - 100 m z Range from 5 - 50 m and 50 - 100 m
z Up to ceiling heights of 25 m
z 10 to 30 V dc operation
z Low current consumption
z Manual or automatic reset
z 3 selectable alarm thresholds
z Self check and automatic contamination compensation
z Automatic discrimination between fire and fault
z Retro operation through prism
z Vertical or horizontal mount
z Easy wiring and unique alignment
z Microprocessor controlled
z Conforms to BS 5839 part 5, EN54,VdS and UL
LINEAR HEAT DETECTION
Linear Heat Detection
Page 33
Technical Data
Ordering Information
950 series addressable controller for analogue linear heat cable DT950L
Technical Data
Operating voltage range Volt dc 18-30 z Conventional and analogue addressable controllers
Operating current (typical) mA z Monitoring at the point of risk
Quiescent 2
Alarm 3.2 z Choice of temperatures
Operating temperature C -25 to +50
Relay contact rating (fire and fault) -
z Ease of installation
IP rating IP65 z Reliable and durable
Dimension (H x Wx D in mm) 105 x 105 x 65
Colour Grey, RAL 9002 z Intrinsic safe solutions
z Ideal for smoke less fires - overheating cables
z VdS approved
Ordering Information
DT950L 950 series addressable controller for analogue linear heat cable
Linear Heat Detection
Page 34
Technical Data
Ordering Information
Analogue linear heat cable with Rilsan coating 500 meter HC650R
Technical Data
Ordering Information
HC650R Analogue linear heat cable with Rilsan coating 500 meter
DT650L Conventional controller for analogue linear heat cable
DT950L 950 series addressable controller for analogue linear heat cable
Analogue linear heat cable with stainless steel covering - 500 meter HC650S
Technical Data
Ordering Information
HC650S Analogue linear heat cable with stainless steel covering - 500 meter
DT650L Conventional controller for analogue linear heat cable
DT950L 950 series addressable controller for analogue linear heat cable
Analogue linear heat cable - Rilsan and stainless steel cover - 500 meter HC650RS
The Rilsan and stainless steel covering gives mechanical strength and
chemical resistance
z Analogue linear heat cable
Technical Data z Conventional and analogue addressable controllers
1m alarm temp C 70-125 z Monitoring at the point of risk
10m alarm temp C 45-100
Operating temp C -20 to +70 z Ease of installation
Outer sheath material Rilsan and Stainless steel z Reliable and durable
Dimensions (diameter in mm) 4.5
z Ideal for smoke less fires - overheating cables
z VdS approved with DT650L & DT950L controllers
Ordering Information
HC650RS Analogue linear heat cable - Rilsan and stainless steel cover - 500 m
DT650L Conventional controller for analogue linear heat cable
DT950L 950 series addressable controller for analogue linear heat cable
Linear Heat Detection
Page 37
Technical Data
Ordering Information
Ordering Information
Ordering Information
Ordering Information
HCA 605-x
Ordering Information
Technical Data
Power Supply
Mains Supply 230 VAC 10% 50 Hz
Power Consumption 95 W (max)
Zone Configuration
Zone Input Voltage 10-20 VDC/VAC
Sensitiviy 0-300 ppm
Cable Requirement 3 core 1.5 mm
Cable Length (max) 350 m
No. of Detectors (max) 15
No. of Zones (max) 5
Mechanical
Housing (w x h x d) 275 x 335 x 130 mm
Weight 6 kg
Ordering Information
KM260/1-ING CO detection control panel - 1 Zone z Designed according to norm 23300/84
KM260/2-ING CO detection control panel - 2 Zones z Miner CDM8001 and CDM8002 standard password
KM260/3-ING CO detection control panel - 3 Zones z LGAI 154.909 and 96013132 standard certification
KM260/4-ING CO detection control panel - 4 Zones
z Easy to use
KM260/5-ING CO detection control panel - 5 Zones
z Low current consumption
z Direct reading of measured levels
z Easy installation
z Extraction relays and alarm outputs per area
z From 1 to 5 areas
z 3-wire system
z Modular design
z Up to 15 detectors per zone
z 10 seconds response time
z Elegant design
z Supervision of all zone lines
z Available in various languages
Expansion Module
Page 42
The KM260 is an expansion module for the KM260-Series CO panels from GE-
Interlogix. It allows for an additional monitoring zone to be added to the
control panel, each module allowing for an additional 15 sensors to be
connected.
Technical Data
Power Supply
Mains Supply 230 VAC 10% 50 Hz
Power Consumption 95 W (max)
Zone Configuration
Zone Input Voltage 10-20 VDC/VAC
Sensitiviy 0-300 ppm
Cable Requirement 3 core 1.5 mm
Cable Length (max) 350 m
No. of Detectors (max) 15
No. of Zones (max) 1
Ordering Information
Technical Data
DM700 Series
A range of call points with flying leads that can but flush mounted or surface
mounted using a back-box
Technical Data
Ordering Information
Technical Data
Ordering Information
z DM700E
z Easy to install
z With breakglass or resettable
z Easy to replace glass
z High quality micro switch
z IP67
z EN54 approved
Manual Call Points
Page 47
Surface mount IP 66/67 intrinsic safe MCP, including back box DM700IS
Technical Data
Ordering Information
DM700IS Surface mount IP 66/67 intrinsic safe MCP, including back box
z Easy to install
z With breakglass or resettable
z Easy to replace glass
z Surface and flush mounting options
z High quality micro switch
z Glass protected with foil
z ATEX approved
z Preformed mounting slots
z Key test facility
Manual Call Points
Page 48
DM700 Series
Technical Data
Ordering Information
A standard EN54 glass for DM700 series of call points, with Aritech logo
Ordering Information
A universal EN54 approved glass for the DM700 series of detectors, no logo
Ordering Information
Ordering Information
z Unobtrusive
z Transparent
z Protects from accidental alarm activation
Manual Call Points
Page 50
A surface mount box with three connectors for DM700 series manual call
points.
Ordering Information
A back box for the surface mounting of DM700 call points, without connectors
Ordering Information
General
The PK20 manual call point is a manual alarm activation point for
conventional detection systems. Once activated, it remains activated until it
is manually reset using a key. To reset, simply turn the key a turn to the
right and it is ready for use.
Technical Data
Size 100 x 95 x 43 mm
Max. recommended distance between units 60 m
Installation height 1.2 - 1.5m
Fastening screws 2x (3.5 x 30 mm)
Power supply voltage 24 VDC
Consumption in standby 0 mA
Consumption in alarm 60 mA
Status Indications Standby, Alarm
Working temperature -10 to 50C
Storage temp. -10 to 50C
Max. relative humidity 95%
z Standard labelling (pictograms)
z Spare crystals not required
Ordering Information z Easy installation
PK20 Resetable Manual Call Point z Easy maintenance
z Accessory for flush mount (optional)
PK20M Flush mount cradle
PK20T Hinged transparent MCP protection cover z Transparent protection cover (optional)
z For conventional systems
z Modern, robust and elegant design
Accessory for PK20 restable manual callpoint. This cradle allows for the PK20
to be flush mounted.
Ordering Information
Ordering Information
z Unobtrusive
z Transparent
z Protects from accidental alarm activation
FIRE INDICATORS
Fire indicators
Page 54
This low current remote indicator can be used with all 650, 950, 700 & 2000
series detectors, and can also be used in intrinsic safe applications.
Ordering Information
Technical Data
Ordering Information
Ordering Information
Technical Data
Electrical Specifications
Supply Voltage 18 to 27 VDC
Activation Voltage 18 to 27 VDC
Current Consumption 600 mA
Switching Polarity NA
Indicators 24 V 3 W
Environmental Specifications
Working Temperature -10 to 75 C
Physical Specifications
Number of zones NA
Buzzer output 80 dB
Housing Colour Grey
Display Colour Red
Weight 700 g
Ordering Information
KR Repeaters
KR24 Illuminated extinguishing waring sign (Spanish version) 24VDC z - Zone indication with alarm buzzer
z - Local buzzer silence control
z - Local buzzer silenced indication
z - Alarm indicated until removed
KR Signs
z - Low current consumption
z - Large angle of view
z - Optical and acoustic indications selectable
z - Modern and elegant design
Fire indicators
Page 57
Technical Data
Electrical Specifications
Supply Voltage 18 to 27 VDC
Activation Voltage 18 to 27 VDC
Current Consumption 600 mA
Switching Polarity NA
Indicators 24 V 3 W
Environmental Specifications
Working Temperature -10 to 75 C
Physical Specifications
Number of zones NA
Buzzer output 80 dB
Housing Colour Grey
Display Colour Red
Weight 700 g
Ordering Information
z - Low current consumption
z - Large angle of view
KR24B Illuminated warning sign (No text) 24VDC
z - Optical and acoustic indications selectable
z - Modern and elegant design
Technical Data
Electrical Specifications
Supply Voltage 18 to 27 VDC
Activation Voltage 18 to 27 VDC
Current Consumption 600 mA
Switching Polarity NA
Indicators 24 V 3 W
Environmental Specifications
Working Temperature -10 to 75 C
Physical Specifications
Number of zones NA
Buzzer output 80 dB
Housing Colour Grey
Display Colour Red
Weight 700 g
Ordering Information
z - Low current consumption
z - Large angle of view
KR24B Illuminated warning sign (No text) 24VDC
z - Optical and acoustic indications selectable
z - Modern and elegant design
Fire indicators
Page 58
The PA25 series remote indicators have been designed for direct connection to
fire detectors, enabling luminous indication outside the area where the
detector is installed.
Technical Data
Electrical Specifications
Supply Voltage (Analogue Systems)5 to 10 VDC
Supply Voltage (Conventional Systems) 2 to 5 VDC
Current Consumption < 50 mA
Mechanical Specifications
Size (w x h x d) 80 x 80 x 42 mm
Weight 10 g
Box material A.B.S.
Colour White
Environmental Specifications
Protection level IP20
Working temperature -10 to +60 C
Storage temperature -10 to +70 C
Ordering Information
PA25/3L Low current remote LED indicator z Direct two-wire connection to detector
z Large angle of visibility - lit up on four sides
z Low current consumption
z Flashing option
z 2 to 28 VDC power supply (depending on model)
z High luminosity
z Compatible with third party products
z IP20 protection level
z Modern and elegant design
z ABS plastic casing with ruby red polycarbonate spy-hole
z Shock resistant
Fire indicators
Page 59
The PA25 series remote indicators have been designed for direct connection to
fire detectors, enabling luminous indication outside the area where the
detector is installed.
Technical Data
Electrical Specifications
Supply Voltage (Analogue Systems)7 to 12 VDC
Supply Voltage (Conventional Systems) NA
Current Consumption 35 mA
Mechanical Specifications
Size (w x h x d) 80 x 80 x 42 mm
Weight 10 g
Box material A.B.S.
Colour White
Environmental Specifications
Protection level IP20
Working temperature -10 to +60 C
Storage temperature -10 to +70 C
Ordering Information
The PA25 series remote indicators have been designed for direct connection to
fire detectors, enabling luminous indication outside the area where the
detector is installed.
Technical Data
Electrical Specifications
Supply Voltage (Analogue Systems)20 to 28 VDC
Supply Voltage (Conventional Systems) NA
Current Consumption 40 mA
Mechanical Specifications
Size (w x h x d) 80 x 80 x 42 mm
Weight 10 g
Box material A.B.S.
Colour White
Environmental Specifications
Protection level IP20
Working temperature -10 to +60 C
Storage temperature -10 to +70 C
Ordering Information
A compact high output, low current sounder ideal for hotels and hospitals.
Available in panel mount, flange mount, and cover flange.
Ordering Information
Technical Data
Operation Continuous
Supply voltage 10 - 28 V dc
Current consumption 7 mA
(see tone table in manual)
Number of tones 26
Starting current 30 mA, 2 msec
Automatic synchronisation Phased start
Line monitoring input Polarised input
Housing ABS plastic
Lens -
Ingress protection IP 65
Operating temperature -25 to +80 C
Dimensions in mm ( x D)
Shallow base 93 x 75
Deep base 93 x 105
Technical Data
Operation Continuous
Supply voltage 10 - 28 V dc
Current consumption 7 mA
(see tone table in manual) @ 240V
Number of tones 26
Starting current 30 mA 30 mA - 2 ms
Automatic synchronisation Phased start
Line monitoring input Polarised input
Housing ABS plastic
Ingress protection IP 65
Operating temperature -25 to +80 C
Dimension ( x D)
Shallow base 93 x 75 mm
Deep base 93 x 105 mm
Ordering Information
z Low current consumption
AS264 Sounder, 26 tones - deep base
AS264M AS 264 mains powered 230 VAC z High sound output
z Multiple tones selection
z 12 - 24 V dc and 230 Vac
z Automatic synchronisation
z Suitable for multiple stage evacuation
z Red and white colour body
z IP 65 intrinsic safe and high output ; IP 66/67 intrinsic safe
versions
z Low profile version
z Version with xenon flash
z Red or clear lens for beacon
Fire Sounders & Beacons
Page 65
Combined sounder and beacon, 2 tones, red lens - shallow base AS266
Technical Data
Operation Continuous
Supply voltage 18 - 30 V dc
Current consumption 68 mA
(see tone table in manual)
Number of tones 2
Starting current 30 mA - 10 ms
Automatic synchronisation Phased start
Line monitoring input Polarised input
Housing ABS plastic
Lens Polycarbonate
Ingress protection IP 65
Operating temperature -10C to +55 C
Dimensions in mm ( x D)
Shallow base 93 x 92
Deep base 93 x 121
Technical Data
Operation Continuous
Supply voltage 9 - 30 V dc
Current consumption 3 mA
Number of tones 4
Starting current -
Automatic synchronisation Phased start
Line monitoring input Polarised input
Housing ABS plastic
Lens -
Ingress protection IP 42
Operating temperature 25C to +85 C
Dimensions in mm ( x D) 101 x 25
Ordering Information
Technical Data
Operation Continuous
Supply voltage 12 - 30 V dc
Current consumption 5 mA
(see tone table in manual)
Number of tones 3
Starting current -
Automatic synchronisation Phased start
Line monitoring input Polarised input
Housing ABS plastic
Lens -
Ingress protection IP 42
Operating temperature -25C to+70 C
Ordering Information
Ordering Information
The SK06 cylindrical siren is available in various colours and is designed for
use inside buildings. Its compactness enables easy integration with building
interiors.
Tones are chosen by selection of micro switches. The siren clips onto a base
whereafter a saftey clip prevents unauthorised removal of the sounder from its
base. As an option, a deep base allows for cable entry and tubes up to a
diameter of 22 mm.
Technical Data
Electrical Characteristics
Supply Voltage 24 VDC
Current Consumption 12 to 17 mA
Environmental
Operating Temperature -40C + 70C
Ingress Protection IP45
Operational Parameters
Sounds ZC - FR - FL - SC
Sound Output 68 to 103 dBA
Colours Red, White, Cream
z Compact
z Volume control
Ordering Information
z Up to 103 dB @ 1m
z Very low current consumption
SK06 Electronic alarm siren
z Easy assembly
z Four different tones
z No maintenance
z Various colours
z Bottom and sides cable entries
z IP45
Fire Sounders & Beacons
Page 69
Technical Data
Electrical
Supply Voltage 22 - 26 VDC
Alarm current 3 mA at 85 dBA or less than 20 mA at 95 dBA
Maximum sound level 95 dBA
Working temperature -20 C to 50 C
Storage temperature -20 C to 70 C
Maximum relative humidity 95 % (non condencing)
Mechanical
Dimensions 63 mm (h) x 93 mm
Protection Index IP445
Fastening screws 2 x 30 mm
Maximum cable section 2.5 mm
Recommended cable size Single core 1.5 mm
Ordering Information
z Low profile
SK07 Low consumption multi-tone alarm siren z Easy installation
z Back and side cable entry
z Polarity sensitive
z Connection base included
z Input and output terminals included
z Acoustic power output selection
z Up to 95 dBA sound output
z Eight different alarm tones
z Automatic tone change
z Low current consumption
z Low maintenance
z IP445 protection level
z EN54 part 3 compliant
Fire Sounders & Beacons
Page 70
Technical Data
Electrical Requirements
Supply voltage 9 to 30 VDC
Consumption @ 24 (tone dependant) 7 to 30 mA
Acoustic power output (tone dependant) 87 to 112 dBA
Nominal power of strobe 1W
Environmental Specification
Working temperature -20 to +60 C
Storage temperature -20 to +70 C
Relative humidity < 95%
Protection level IP445
Functional Specification
Strobe frequency 60 flashes/minute
Colour Red RAL3001
Size ( h x ) 80 x 92 mm
Weight 180 g
z 32 different tones
Ordering Information z Includes flashing beacon
SK20 Alarm sounder with beacon z Low profile
z Very low consumption
z Up to 112 dBA sound output levels
z IP445 protection level
z Sound output power selection
z Input and output terminals provided
z Easy installation
z Low maintenance
z Back and side cable entry
z Modern and elegant design
Fire Sounders & Beacons
Page 71
The SK40 alarm siren with luminous indicator has been designed specifically
for external use. Its main function is to warn people outside a building of the
detection of a fire alarm inside the building. The SK40 combines the acoustic
and indicator parts in a single housing, and is activated with a single voltage
input.
Technical Data
Electrical Specifications
Supply Voltage 22 to 28 VDC
Alarm Current @ 24V 220 mA
Environmental Specifications
Ingress Protection IP33
Operating Temperature -20 to 60 C
Storage Temperature -20 to 60 C
Physical Characteristics
Dimentions (h x w x d) 297 x 210 x 75 mm
Sound Output 105 dB at 1 m
Sound Frequency 2.8 to 3.1 kHz 3%
Cycle Time 1 min ON 1 min OFF
Flash Rate 1 flash /s
The PA40 Xenon Strobe has been designed for in and outdoor use. It is
available with various colour lenses to suit the application.
Technical Data
Electrical Characteristics
Supply Voltage 12/24 VDC
Current Consumption (12 VDC) 115 mA 20 %
Current Consumption (12 VDC) 35 mA 25 %
Environmental Specifications
Operating Temperature -20 C to +60 C
Operational Specifications
Flash rate 60-100 flashes/min @ 20C
Operating life 200 hours
Colours Amber, blue, clear, red
Dimentions ( h x ) 79 x 90 mm
Ordering Information
z High intensity xenon
PA40 Xenon strobe light
z 12 and 14 VDC operation
z Low current consumption
z Low maintenance
Technical Data
Electrical Characteristics
Supply Voltage 24 VDC
Current Consumption 30 mA
Physical Characteristics
Sound Output 95 dB/m
Colour Red
Weight 0.9 kg
Diameter 6 (150 mm)
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 42
Dimensions (mm) 70 x 85 x 40
Keeper plate flat/swivel S
Release button -
Protection diode -
Reverse polarity -
Cable entry 2
EN1155 Yes
NF61937 -
BS5839pt3 -
Ordering Information
FE831 Door holder, steel box, surface mount, basic z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 75
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 42
Dimensions (mm) 70 x 85 x 40
Keeper plate flat/swivel S
Release button Yes
Protection diode Yes
Reverse polarity -
Cable entry 2
EN1155 Yes
NF61937 Yes
BS5839pt3 Yes
Ordering Information
FE832 Door holder, steel box, surface mount complete z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 76
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 30
Dimensions (mm) 55 x 55 x 24
Keeper plate flat/swivel F
Release button -
Protection diode -
Reverse polarity -
Cable entry -
EN1155 Yes
NF61937 -
BS5839pt3 -
Ordering Information
FE835 Door holder, steel square base z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 77
Technical Data
Volt 24
Power 1.6
Holding force (daN) 70
IP rating 30
Dimensions (mm) 55 x 55 x 24
Keeper plate flat/swivel F
Release button -
Protection diode Yes
Reverse polarity Yes
Cable entry 1
EN1155 Yes
VDS Coil Yes
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 42
Dimensions (mm) 83 x 83 x 35
Keeper plate flat/swivel S
Release button Yes
Protection diode Yes
Reverse polarity Yes
Cable entry -
EN1155 Yes
NF61937 Yes
BS5839pt3 Yes
Ordering Information
FE836 Door holder, flush mounting z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 79
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 42
Dimensions (mm) 83 x 83 x 46
Keeper plate flat/swivel S
Release button Yes
Protection diode Yes
Reverse polarity Yes
Cable entry 2
EN1155 Yes
NF61937 Yes
BS5839pt3 Yes
Ordering Information
FE841 Door holder, reinforced aluminium box z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 80
Technical Data
Volt 24
Power 1.6
Holding force (daN) 70
IP rating 52
Dimensions (mm) 83 x 83 x 46
Keeper plate flat/swivel S
Release button Yes
Protection diode Yes
Reverse polarity Yes
Cable entry 1
EN1155 Yes
VDS Coil Yes
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 40
IP rating 42
Dimensions (mm) 80 x 80 x 56
Keeper plate flat/swivel F
Release button Yes
Protection diode Yes
Reverse polarity -
Cable entry -
EN1155 Yes
NF61937 Yes
BS5839pt3 Yes
Ordering Information
FE845 Door holder, wall mount, reinforced aluminium box z Complete range for wall and surface mount
z Low power - 1,6 W
z 40 daN holding power standard series
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
z Protection diode and reverse polarity protection on most
models
z Release button on most models
z EN and French approvals (see specification)
Technical Data
Dimensions (mm) 80 x 80 x 43
Ordering Information
Technical Data
Ordering Information
Technical Data
Ordering Information
Technical Data
Volt 24
Power 3
Holding force (daN) 40
IP rating 42
Dimensions (mm) 128 x 110 x 80
Keeper plate flat/swivel F
Release button Yes
Protection diode Yes
Reverse polarity -
Cable entry -
EN1155 Yes
NF61937 Yes
BS5839pt3 Yes
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 70
IP rating 42
Dimensions (mm) -
Keeper plate flat/swivel S
Release button Yes
Protection diode Yes
Reverse polarity Yes
Cable entry -
EN1155 Yes
VDS Coil Yes
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 70
IP rating 42
Dimensions (mm) -
Keeper plate flat/swivel S
Release button Yes z Complete range for wall and surface mount
Protection diode Yes z Low power - 1,6 W
Reverse polarity Yes
Cable entry - z 40 daN holding power standard series
EN1155 Yes
VDS Coil Yes
z 70 daN holding power on VDS coils
z 100% duty cycle
z Anti-remnant ejector
Ordering Information z Protection diode and reverse polarity protection on most
models
FE852VDS Door holder, universal adjustable tube, 475mm, VDS magnet
z Release button on most models
z EN and French approvals (see specification)
Electromagnetic door holders
Page 85
Technical Data
Volt 24
Power 1.6
Holding force (daN) 70
IP rating 65
Dimensions (mm) -
Keeper plate flat/swivel F
Release button -
Protection diode Yes
Reverse polarity Yes
Cable entry 1
EN1155 Yes
VDS Coil Yes
Ordering Information
Technical Data
Volt 24
Power 1.6
Holding force (daN) 50
IP rating Ex
EN1155 ATEX
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Ordering Information
Technical Data
Ordering Information
Canvas carrying bag for the test and service equipment CB001
A practical, versatile, and rugged carrying case for the test and maintainence
equipment
Ordering Information
CB001 Canvas carrying bag for the test and service equipment
Test and Service Equipment
Page 93
The KP300 test kit allows the user to test detectors and sensors on location
that can normally not be easily reached. It to a great extent eliminates the
need for ladders and cherry pickers for testing purposes.
Ordering Information
The EP300 is an extension pole for the KP300 detector tester. The poles are
non-conductive to provide the safest operation. The extension is a 1m section
and extension poles may be added to maximum reach of 9 m.
Technical Data
Length 1m
Ordering Information
The SPN500 is test gas for EP300 test equipment. It allows for the easy an
safe activation of optical and ionisation smoke detectors during testing.
Ordering Information
Technical Data
INPUT
Voltage 230 V ac nominal; +10%,-15%
Current 1.5 A maximum for full 5 A load
OUTPUT
Voltage 27- 28 V dc on mains power / 18 - 25 V dc on
battery standby
Load Current 0 - 5A
Ripple 100 mV max over full rated mains voltage
Load regulation 5% maximum
Overload Electronic shutdown at 7A until overload or short
circuit removed
STANDBY BATTERY
Battery capacity From 2 x 7Ah to 2 x 17Ah series connected
Battery charging Constant current (1A) bulk charging to 80%, float
charging to 100%
Deep discharge protection Battery disconnect at 20 V nominal
Faulty battery detection Battery disconnect at 19 V nominal when mains
present
Battery monitoring current 1 mA maximum used for battery monitoring z Approved to EN54-4
function
LOCAL INDICATORS z 5 A current to load at 27.6 V dc nominal regulated output
LED green Mains present
z Electronic overload protection
LED amber flashing Fault present: output fuse fail, battery fault or not
present, battery charger fault, z Battery monitor detector :
loss of mains input
SIGNALLING OUTPUTS z - Battery missing, low battery
Remote fault communication 5 A @ 30 V dc COM,N/O, N/C changeover potential z - Short-circuit or reverse connection
free contacts.
Output fail communication 0.5 A @ 30 V dc N/O potential free contacts z Automatic battery switching
MECHANICAL
z Deep discharge protection
Size 400 x 420 x 80 mm
Weight 9 kg (excluding batteries) z Fault indicator LED
Temperature -10 to +40 C (operating); 95% RH non-condensing
-20 to +80 C (storage) z Fault Relay output
z Output sense relay
z Mains indicator LED
Ordering Information z Temperature compensated
PM705 EN 54-4 approved, 24 V 5A Intelligent Power Supply z Self contained box houses 17 Ah batteries
Power Supplies
Page 97
Technical Data
Mechanical
Dimensions (w x h x d) 215 x 260 x 75 mm
Weight (without batteries) 2.5 kg
Electrical
Operating Voltage 230 VAC 50Hz 10%
Output Voltage 24 VDC
Batteries 2 x 12 V 2.1 Ah
Environmental
Operating Temperature -10 C to 40 C
Storage Temperature -10 C to 40 C
Relative Humidity (Non Condencing) 95% max
Ordering Information
Technical Data
Mechanical
Dimensions (w x h x d) 290 x 360 x 110 mm
Weight (without batteries) 6.26 kg
Electrical
Operating Voltage 230 VAC 50Hz 10%
Output Voltage 27.6 VDC
Batteries 2 x 12 V 6 Ah
Environmental
Operating Temperature -10 C to 40 C
StorageTemperature -10 C to 40 C
Relative Humidity (Non Condencing) 95% max
Ordering Information
Technical Data
Mechanical
Dimensions (w x h x d) 290 x 360 x 110 mm
Weight (without batteries)
Electrical
Operating Voltage 230 VAC 50Hz 10%
Output Voltage 24 VDC
Batteries 2 x 12 V 6 Ah (int) or 24 Ah (ext)
Environmental
Operating Temperature -10 C to 40 C
StorageTemperature -10 C to 40 C
Relative Humidity (Non Condencing) 95% max
Ordering Information
Technical Data
Voltage 12 VDC
Nominal capacity 2.3 Ah, 20 h rate
Max charge voltage at 20 C 13.8 VDC
Max. charge current 0.69 A
Max. discharge current 11.5 A
Internal approx. resistance 42 mOhm
Operating temperature
Charge 0 to 40C
Discharge -15 to 50C
Storage -15 to 40C
Terminal type Fast-on 4.8 mm
Material case ABS
Fire retardant -
Weight 1.061 kg
Dimensions (W x H x D) 178 x 34 x 60 mm
VdS approval -
z Maintenance-free
Ordering Information
z Lead-Calcium grid for extended life
BS122N Sealed lead acid battery - 12 V - 2.3 Ah z Wide operating temperature range
BS122V Sealed lead acid battery - 12 V - 1.9 Ah - VdS approved
z Usable and rechangeable in any position
z Low self discharge and long service life
z Leakproof construction
z High discharge rate capacity
Technical Data
Voltage 12 VDC
Nominal capacity 7.2 Ah, 20h rate
Max charge voltage at 20 C 13.8 VDC
Max. charge current 2.16 A
Max. discharge current 35 A
Internal approx. resistance 21 mOhm
Operating temperature
Charge 0 to 40C
Discharge -15 to 50C
Storage -15 to 40C
Terminal type Fast-on 4.8MM
Material case ABS
Fire retardant -
Weight 2.678 kg
Dimensions (W x H x D) 151 x 94 x 65 mm
VdS approval -
z Maintenance-free
Ordering Information
z Lead-Calcium grid for extended life
BS127N Sealed lead acid battery - 12 V - 7.2 Ah z Wide operating temperature range
BS127NS3 Sealed lead acid battery - 12 V - 7.2 Ah - V0 flame retardant case
BS127V Sealed lead acid battery - 12 V - 7.2 Ah - VdS approved z Usable and rechangeable in any position
z Low self discharge and long service life
z Leakproof construction
z High discharge rate capacity
Cables
Page 100
The KAL21 is a single pair, twisted cabe with screen and no sleeve. Its step is
formed by more than 25 turns between conductors. It is ideal for use as DC
power carrier or as data bus for access control and fire detection.
Technical Data
Conductor
Section 1.5 mm
Aluminum MYLAR 7 * 0.18 mm
Conductor diameter 2.8-3.1 mm
Resistance < 13.3 ohm/km
Operating Temperature -20 C to +85 C
Ordering Information
z Colours: red-black
z Polished copper, flexibility class 5 according to UNE-21.022
z Tape of aluminum MYLAR, polyester and thread with drainage in
tin-plated copper
The KAL21A is a single pair, twisted cabe with braided screen and sleeve. Its
step is formed by more than 25 turns between conductors. It is ideal for use as
data bus for access control and fire detection.
Technical Data
Conductor
Section 1.5 mm
Aluminum MYLAR 7 * 0.18 mm
Conductor diameter 2.8-3.1 mm
Resistance < 13.3 ohm/km
Operating Temperature -20 C to +85 C
Impedance 115 ohm
Test Voltage 1500 V
Isolation Resistance > 10 000 ohm/km
Ordering Information
z Colours: red-black
z Polished copper, flexibility class 5 according to UNE-21.022
z Tape of aluminum MYLAR, polyester and thread with drainage in
tin-plated copper
z Compact PVC outer cover in red colour
Cables
Page 101
The KAL21B is a doublepair, twisted cabe with braided screen and sleeve. Its
step is formed by more than 25 turns between conductors. It is ideal for use as
data bus for access control and fire detection.
Technical Data
Conductor
Section 1.5 mm
Aluminum MYLAR 7 * 0.18 mm
Conductor diameter 2.8-2.9 mm
Resistance < 13.3 ohm/km
Operating Temperature -20 C to +85 C
Impedance 115 ohm
Test Voltage 1500 V
Isolation Resistance > 10 000 ohm/km
Capacitance 86 pF/m at 1 KHz
Operating Voltage 24 VDC / 48 VDC
Ordering Information