Professional Documents
Culture Documents
Define Default Values For Control Indicators
Define Default Values For Control Indicators
In this step, you define control keys for the attributes of inspection characteristics.
The control key is used to propose or predefine the control indicators for the master inspection characteristics and inspection plan
characteristics.
After you have specified in the control key whether or not the indicators will be predefined and whether the characteristic is quantitative or
qualitative, you must define various characteristic attributes. Refer to the F1-documentation for information about the control indicators
contained in the key.
Standard settings
The control keys in the standard system comprise a basic set with which most of the characteristic types in the SAP application component
QM can be displayed.
SAP Recommendation
Define the nomenclature for the descriptive short text, so you can quickly find the appropriate control keys.
Set the control indicators in such a way as to avoid unnecessary problems when you record results.
Activities
1. Determine which control indicators or characteristic attributes exist and which are important to you.
2. Determine which basic types of characteristics are commonly used in your company and how they can be displayed using
these control indicators.
3. Define mnemonic short texts for these basic types.
4. Maintain the table for the control key default values.
5. Test the effect of the control keys when you record results.
Additional informationen
Some control indicators will be ready for input only after other control indicators have been set. If necessary, use the "Inspect"
function and complete the fields on the screen.