Professional Documents
Culture Documents
Alteration Related To Epithermal Ore Deposits PDF
Alteration Related To Epithermal Ore Deposits PDF
charts have been extracted from The Alteration Atlas (Thompson and
Thompson, 1996) and the SpecMIN software program.
1
Epithermal gold deposits occur largely in volcano-plutonic
arcs (island arcs as well as continental arcs) associated with
subduction zones, with ages similar to those of volcanism.
The deposits form at shallow depth, <1.5 km, and are hosted
mainly by volcanic rocks.
2
Schematic model of a volcanic-related hydrothermal system
(based on T. Leach diagrams).
3
Although 3 types of epithermal deposits can be
distinguished, the two most common end-member styles of
epithermal gold deposits are high sulfidation (HS) and low
sulfidation (LS).
4
This models represents the type of fossil hydrothermal
systems responsible for HS ore deposits (Wolhetz and
Heiken, 1992):
wiggly arrows represent rising sulfur-rich
magmatic gases;
these gases condense and oxidize to form the acid fluids
responsible for leaching and argillic alteration of rocks
within the volcano and at the surface.
5
This models represents the type of fossil hydrothermal
systems responsible for LS ore deposits (Wolhetz and
Heiken, 1992):
Characterized by adularia-sericite alteration and alkali-
chloride waters that have a neutral pH.
6
Summary of characteristics of low and high sulfidation
systems.
7
Worldwide distribution of selected epithermal deposits
(Taylor, 2007).
8
Many hydrothermal minerals are stable over limited
temperature and/or pH ranges.
9
From Taylor (2007):
In both high-sulphidation and low-sulphidation deposit
subtypes, hydrothermal alteration mineral assemblages are
commonly regularly zoned about vein- or breccia-filled fluid
conduits
However they may be less regularly zoned in near-
surface environments, or where permeable rocks have
been replaced.
Characteristic alteration mineral assemblages in both deposit
subtypes can give way to propylitically altered rocks
containing quartz+chlorite+albite+carbonatesericite,
epidote, and pyrite. The distribution and formation of the
earlier formed propylitic mineral assemblages generally
bears no obvious direct relationship to ore-related alteration
mineral assemblages.
10
A list of epithermal alteration minerals that can be identified
using reflectance spectroscopy is shown here.
11
The pH and temperature conditions of alteration can be
deduced based on mineral assemblages.
12
Another diagram showing the temperature stability of various
alteration minerals found in the epithermal environment.
13
Note: No scale is given because the widths of alteration
zones range from centimeters to tens of meters outward from
the vein (Wolhetz and Heiken, 1992).
14
15
VIS-NIR-SWIR plots showing some common propylitic
alteration minerals.
16
Chlorite is a very common alteration mineral and can occur
in a range of different alteration zones and deposit types.
17
18
Advanced argillic alteration minerals are generally easy to
identify by SWIR features.
19
Alunite is a common constituent of advanced argillic
alteration.
20
Alunite can occur in a range of different settings.
21
22
Characteristics of dickite.
23
Characteristic of pyrophyllite.
24
Pyrophyllite can occur in several different environments.
25
Characteristics of diaspore.
26
27
Characteristics of zunyite.
28
29
Weathered outcrops of steam-heated alteration are often
characterized by resistant quartz alunite 'ledges' and
extensive flanking bleached, clay-altered zones with
supergene alunite, jarosite and other limonite minerals
(Panteleyev, 1996).
30
VIS-NIR-SWIR features of common steam-heated argillic
alteration minerals.
31
32
This assemblage occurs as wallrock alteration around veins
and replacement zones in permeable lithologies.
33
Carbonates can be important in these systems (usually only
in LS environments) and may reflect condensation of CO2
from deeper boiling zones.
34
Oxidation and/or weathering of sulfide-bearing epithermal
deposits can result in the formation of significant secondary
iron ( metal) species.
35
VIS-NIR features of common Fe oxides and sulfates are
shown.
36
37