Professional Documents
Culture Documents
Bombas Sulzer PDF
Bombas Sulzer PDF
N Hydraulics R Air-Separating
Non-clogging. Sludges External vacuum
containing big particles pump and expeller.
and long fibers.
A Hydraulics S Self-Priming
General purpose. Clean, Internal vacuum
W Hydraulics abrasive or corrosive pump.
liquids specially stocks of
Wear-resistant.
various kinds.
Corrosive and/or
abrasive liquids.
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 4
AHLSTAR Process Pumps
Design Features
LowPulse impeller
High efficiency
Minimized pulsations
Special open impeller Dilution water for
High efficiency headbox
More open passages Stocks for headbox
Open impeller Liquids containing feed
High efficiency long particles and fibers Clean liquids
Good throughput Abrasive liquids Stocks up to 8%
Liquids containing Stocks up to 8%
Closed impeller solid particles Solids up to 70%
High efficiency Abrasive liquids Lumps in liquid
Clean liquids Stocks up to 8%
Liquids containing Solids up to 70%
some impurities Lumps in liquid
Liquids:
sludges, waste waters, effluents Cutting grooves for
closed impeller
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 7
AHLSTAR Process Pumps
WPP/WPT Hydraulic Design
Wear-resistant design
resists abrasion and
erosion in slurry pumping.
Vortex impeller
Smooth shapes.
Open impeller
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 8
AHLSTAR Process Pumps
EPP/EPT Hydraulic Design
Centerline support
keeps shaft position
horizontal at elevated
Closed impeller
temperatures
Spot-cooled stuffing
box area to handle
high temperatures
S R
Structure Structure
Self-Priming Air-
Pump Separating
Pump
Casing cover
Adapter
Head up to 160 m
Temperature max. 180 C
Capacity up to 2000 l/s
Operating
frequencies 50 or 60 Hz
Pressure up to 1.6 Mpa
(depending on material and size)
Head up to 700 ft
Temperature max. 356 F
Capacity up to 30000
USGPM
Operating
frequencies 50 or 60 Hz
Pressure up to 230 psi
(depending on material and size)
Head up to 90 m
Temperature max. 180 C
Capacity up to 550 l/s
Operating
frequencies 50 or 60 Hz
Pressure up to 1.6 Mpa
(depending on material and size)
Head up to 250 ft
Temperature max. 356 F
Capacity up to 7000
USGPM
Operating
frequencies 50 or 60 Hz
Pressure up to 230 psi
(depending on material and size)
Head up to 110 m
Temperature max. 180 C
Capacity up to 2000 l/s
Operating
frequencies 50 or 60 Hz
Pressure up to 1.6 Mpa
(depending on material and size)
Head up to 360 ft
Temperature max. 356 F
Capacity up to 30000
USGPM
Operating
frequencies 50 or 60 Hz
Pressure up to 230 psi
(depending on material and size)
Head up to 140 m
Temperature max. 210 C
Capacity up to 1700 l/s
Operating
frequencies 50 or 60 Hz
Pressure up to 2.5 Mpa
Head up to 650 ft
Temperature max. 410 F
Capacity up to 21000
USGPM
Operating
frequencies 50 or 60 Hz
Pressure up to 360 psi
Bound
Conventional Pump:
Unstable operation
(gas content 0...4%)
Free
Gas/air to the
inlet tank
Vacuum
Sealing water relief valve
Balancing holes keep the pressure Controlling the shaft seal area
level steady at the shaft seal area. pressure gives
Back vanes keep the area between Best solutions for every application
the impeller and casing cover clean
and reduce axial forces. Reliability in operation
NPP, vortex
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 24
AHLSTAR Process Pumps
Shaft Seal Liquids
Dynamic Seal
Reliable operation optimize total lifetime costs
Designed for difficult applications
Simple operating principle
Reliable robust construction
Liquids
paper stock up to 8%
liquors
lime milk
Not running
waters
sugar juices
etc.
Operating
Grease
Variable speed operation
High storage towers which
are sometimes full
Reduced diameter
High-speed pumps
Lower power
consumption
Double
Low pressure at suction
side during standstill
Reliable operation
Easy assembly
Designed to be a part of
the pump
Heavy-duty design
Minimum number of parts
Compatibility with pump
materials
Reliable operation
Easy assembly
Low-pressure quench fluid
Designed to be a part of the pump
Heavy-duty design
Minimum number of parts
Compatibility with pump materials
Typical manufacturers
John Crane Safematic
Burgmann
Huhnseal
Reliable operation
Easy assembly
High-pressure flowing barrier fluid
High-pressure non-flowing barrier
fluid, dead-end
Designed to be a part of the pump
Heavy-duty design
Minimum number of parts
Compatibility with pump materials
Typical manufacturers
John Crane Safematic
Burgmann
Huhnseal
Metal bellows
Metal bellows allow higher temperatures
Thin materials restrict usage with
abrasive liquids
Options
No sealing fluid
Internal or external flushing
Quench
Grease
Typical manufacturers
John Crane
Burgmann
Typical manufacturers
John Crane
Chesterton
Burgmann
Various arrangements
No sealing fluid
- clean liquids, water
Internal flushing
- clean liquids
External flushing
- impure liquids
Barrier flowing
Reliable operation
- impure liquids
High maintenance costs
Cooling insert
Traditional shaft seal design - clean liquids
Always leaking
Leakage lubricates sliding surfaces
Abrasion of shaft sleeve and gland packings
Easy change of gland packing ring
Split stuffing box gland
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 34
AHLSTAR Process Pumps
S Structure Shaft Sealing
Ready-fitted mechanical seals, double Mechanical element seals,
Designed to be a part of the pump single
With or without external flushing fluid With or without external
Quench sealing fluid flushing fluid
Barrier flowing or non-flowing (dead-end) Metal bellows
sealing fluid, pressurized
Static seal
Simple
Constant air flow from outside
Typical manufacturers
John Crane
Burgmann
Metal bellows
Typical manufacturers
John Crane Safematic,
Burgmann, Huhnseal
Barrier flowing
Quench sealing
fluid
Emptying holes
Casing
Dynamic seal
S version casing for vacuum pump
R version stuffing box housing
Painting
EN ISO12944
Thickness 200 m
Epoxy max. 150 oC / 300 oF
Silicon aluminum and epoxy
above 150 oC / 300 oF
Base also available with zinc epoxy
Grinding
Interior surfaces
- Ra 6.3
- Cotton ball
Open impellers only
Sandblasting also available
Washing
Special care is taken to ensure
the cleanliness of the pump.
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 47
AHLSTAR Process Pumps
Tests and Certificates
NPSHr
ISO 9906 Grade 2
Pulsation
For LowPulse pumps
Guarantee values in relation
to delivered head
Books www.sulzerpumps.com
CD-roms
For the total project delivery order
Several languages in IOM and
component documents
Other documentation in English
V00738 en / Copyright Sulzer Pumps Finland Oy 8.2003 / 49
AHLSTAR Process Pumps
AHLSTAR Vertical Pumps
AHLSTAR NKP/NKT,
WKP/WKT Cantilever Pump
Recirculation pipe.
Single mechanical
shaft seal.