Professional Documents
Culture Documents
58
drainage drainage
Symphonic drainage
Syphonic drainage
59
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage
Symphonic drainage
60
Symphonic drainage
Contents
Regulations and standards
The stipulations in DIN and DIN EN
standards must be complied with when
planning and installing flat roof drains for
syphonic drainage. The standards also
apply to floor drains and flat roof drains.
Gravity drainage
Emergency drainage Specifications for green roofs
DIN 1986-100, Chapter 5.9 stipulates If a green roof is to be drained using a
that emergency drainage systems can syphonic drainage system, analysis
either drain freely through parapets, or should be carried out in each case during
that emergency drainage systems must the planning stage to ensure that this is
be installed as gravity drainage systems feasible on a green roof (Green Roof
or as planned completely full pipes with Regulations, Chapter 5.8 and 6.5.2).
Syphonic drainage
syphonic drainage.
Calculating the syphonic
Fire protection drainage system parameters
Flat roof drains with fire protection are Syphonic drainage calculations have to
required on flat roofs in accordance with be carried out to ensure that the overall
state building regulations if the separati- system functions properly. This calculati-
on between the roof drains and a rising on is based on the volume flow, which is
wall in these areas is less than 5 metres itself derived from the reference rainfall
(walls with openings or with no fire resis- to be drained by the pipe system.
tance capacity).
Parking deck
drainage
The hydraulic calculation can be carried
In this case, an appropriate fire protec- out using Aquaperfect software.
tion roof drain without an odour seal This software generates the following
must be installed. This prevents the data:
spread of fire and smoke into neighbou- Isometric diagram of the pipe
ring parts of the building. Special atten- systems
tion should be given to the fire resistance Hydraulic calculations
drainage
tance class or a higher fire resistance
class than the ceiling.
The following pages contain a calculation
datasheet for syphonic drainage systems
pursuant to DIN 1986-100, as well as
a check list for the calculation data para-
meters. The calculation for syphonic
Facade drainage
61
Symphonic drainage
Basic conditions
Influencing factors
Dimensioning
Material selection
62
Symphonic drainage
Dimensioning
Contents
Please fill in this questionnaire for dimen- Applications Technology
sioning your roof drainage system, and Flat roof drainage
fax the pages to the ACO Applications Tel. +49 (0) 36965 8190
Technology in Stadtlengsfeld/Germany: Fax +49 (0) 36965 819364
gmx@aco-online.de
General information
Gravity drainage
Building: Name
Address
Postcode, Place
Country
Syphonic drainage
Planning phase: Blueprint planning Approval planning Implementation planning
Owner: Name
Address
Postcode, Place
Country
Parking deck
Telephone
drainage
Fax
Planner/fabricator: Name
Contact person
drainage
Postcode, Place
Country
Telephone
Fax
E-mail
Facade drainage
Reference rainfall pursuant to KOSTRA DWD 2000 or different rainfall details from the planner
Flow coefficient C/
63
Symphonic drainage
Roof construction:
Contents
1-piece 1-piece
2-piece 2-piece
hA
drainage
b
Bitte angeben
Balcony and terrace
h available max cm
b cm
Enclosed documents
64
Symphonic drainage
Dimensioning
Contents
Tick off the points in the check list which
have already been dealt with. When com-
plete, nothing more stands in the way of
the precise planning of your drainage
system.
Gravity drainage
Take into consideration the sub-roof areas
Consider minimum specific output for symphonic drainage!
(Minimum specific output/outlet 23 l/s )
Take into consideration the high points and low points
Take into consideration firewalls
Take into consideration fire protection zones
Syphonic drainage
When there are different sub-roofs
When there are different roof constructions
Define the flow coefficients for different parts of the roof
Parking deck
drainage
Request the construction plans (DWG/Cad files)
Roof floor plan with high points and low points
Cross-section with height figures
Cross-section through the floors with positions of the pipes
Position of buried pipes
Specify the following data when only sketches are available:
Position of the drains
drainage
High points and low points on the roofs
65
Symphonic drainage
Syphonic drainage using ACO Jet flat roof drain made of cast iron
Contents
1
Gravity drainage
Gravel layer
2
Sealing membrane
Syphonic drainage
Ceiling (thickness
pursuant to structural
engineering specifica-
tions)
DN 50 DN 80
75
75
Facade drainage
246
195
Pipe systems
The outlet socket of the drain body must not be shortened The outlet socket of the drain body must not be shortened
on site on site
The gravel basket (75 mm height) can be raised in 65 mm steps using a height adapter. Please see page 74.
66
Extension heights in mm
Symphonic drainage
Syphonic drainage using ACO Jet flat roof drain made of cast iron
Contents
1
Gravity drainage
5
Sealing membrane
4
3 Insulation
2
Syphonic drainage
Sealing membrane
(vapour trap)
Concrete roof
(thickness pursuant
to structural enginee-
ring specifications)
Parking deck
drainage
Article No. 7037.10.10
2 Insulating body 6 Levelling element
Article No. 7040.22.00 4 Insulating ring Article No. 7040.02.00
Article No. 7040.12.00
50200
70200
Facade drainage
246
195
Pipe systems
The outlet socket of the drain body must not be shortened The outlet socket of the drain body must not be shortened
on site on site
The gravel basket (75 mm height) can be raised in 65 mm steps using a height adapter. Please see page 74.
67
Extension heights in mm
Symphonic drainage
Syphonic drainage with ACO Jet flat roof drain made of stainless steel
Contents
2
Gravity drainage
Sealing membrane
1
Syphonic drainage
Concrete roof
DN 70 DN 100
98
88
Facade drainage
364
370
Pipe systems
The gravel basket top section for the Jet drain DN 70 has an The gravel basket top section for the Jet drain DN 100 must always
extension height of either 70 mm or 225 mm. be installed.
68
Extension heights in mm
Symphonic drainage
Syphonic drainage with ACO Jet flat roof drain made of stainless steel
Contents
1
Gravity drainage
6
Sealing membrane
2
Insulation
Syphonic drainage
4
3
Sealing membrane
(Damp proof membrane)
Concrete roof (thickness
pursuant to structural en-
gineering specifications)
Parking deck
drainage
Article No. 0174.46.55
1 Air lock 4 Jet lower part DN 70, stainless steel 6 Insulation for inflow cone,
Article No. 0174.77.03 Article No. 0174.46.69 polystyrene DN 70
Article No. 0174.46.56
2 ACO Jet drain body, DN 70,
made of stainless steel
Article No. 0174.76.48
25200
80250
Facade drainage
370
370
Pipe systems
The gravel basket top section for the Jet drain DN 70 has an The gravel basket top section for the Jet drain DN 100 must always
extension height of either 70 mm or 225 mm. be installed.
69
Extension heights in mm
Symphonic drainage
Installation example
ACO flat roof drain made of stainless steel, emergency drainage system
Contents
Sealing membrane
Insulation
Sealing membrane
3 2
Gravity drainage
4
1
Syphonic drainage
Ceiling (thickness
pursuant to structural
engineering specifica-
tions)
1 ACO Jet flat roof drain made of 2 Attika duct with compression 3 Impoundment ring
stainless steel sealing flange Article No. 0174.46.75
Parking deck
drainage
DN 40, 50 DN 70
Facade drainage
88
88
DN50: 71
DN40: 63
92
Pipe systems
Extension heights in mm
70
Symphonic drainage
Modular system
ACO Jet flat roof drain made of cast iron for syphonic drainage
Contents
Top frame with grating Gravel basket
L15 M125
Gravity drainage
Loose flange
Top ring
Height adapter
Syphonic drainage
Upper part
Impoundment pipe
Sealing ring
Insulating
Parking deck
ring
drainage
Levelling
drainage
Function part
Facade drainage
Loose flange
Drain body
Pipe systems
Flat roof
heating
Insulating body
71
Symphonic drainage
DN 50 DN 80
Contents
Drain body DN 50 or DN 80
Cast iron, construction material class
A1, coated
With compression sealing flange and
seepage openings and function com-
ponent
Can be connected to spigot pipe
Gravity drainage
360
290
188
141
Syphonic drainage
246
195
105
76
Model with vertical outlet socket Model with vertical outlet socket
DN 50 DN 80
Parking deck
drainage
Nominal
a c b [mm] Article No.
width
For drain body without insulating body
DN 50 300 150 30 7037.10.10
DN 80 380 200 35 7038.10.10
For drain body with insulating body
DN 50 315 220 45 7037.10.10 c
Facade drainage
Recess dimensions
72
Symphonic drainage
Additional components
Contents
Scale drawing Product description Model Article No.
290
150
Upper part
142
cast iron, fits Jet flat roof
drains made of cast iron,
70
for sealing with two sealing
membranes, with compres-
Gravity drainage
DN 50 7047.10.25
sion sealing flange, seepage
250
openings and sealing ring.
DN100
40
Insulating body
80
Syphonic drainage
145
vertical outlet socket,
foam glass
DN 50 7040.22.00
270
316
290
Parking deck
drainage
300 Insulating ring
for flat roof drain upper part, DN 50 7040.12.00
foam glass
60
300
Gravel basket
145
DN 50 7040.02.00
of cast iron, basket made of
drainage
stainless steel with two fas-
tening screws
360
200
Upper part
cast iron, fits Jet flat roof
drains made of cast iron,
for sealing with two sealing
DN 80 7044.10.25
Facade drainage
368
60
Insulating body
130
DN 80 7040.21.00
266
430
400
73
Symphonic drainage
100
Insulating ring
Contents
50
for flat roof drain upper part DN 80 7040.01.00
DN 50, DN 80, foam glass
220
Gravity drainage
110
DN 50,one-piece
Impoundment pipe
and two-piece 7047.10.55
55 mm high,
for converting a Jet flat roof
55
Levelling element
287
for flat roof drain upper part DN 50 7000.02.00
15
DN 80 7000.12.00
Balcony and terrace
Height adapter
drainage
285
Height: 65 mm, fits gravel
basket for Jet flat roof drains
made of cast iron. Height ad- DN 50/DN 80 7000.11.00
65
200
Facade drainage
DN 50, 7000.44.00
Class M125
10
Pipe systems
Cast iron
300
DN 80,
7000.46.00
Class M125
282
75 20
180
74
Symphonic drainage
Modular system
ACO Jet flat roof drains made of stainless steel for syphonic drainage
Contents
Impoundment ring Impoundment ring
Gravity drainage
Gravel basket
Loose flange
Syphonic drainage
Flange
seal
Drain
body
Parking deck
drainage
Balcony and terrace
drainage
Drain
Facade drainage
body
Drain Drain
body body
Flat roof
heating
Pipe systems
ACO Jet flat roof drains made of stainless steel with vertical outlet socket
DN 70
Contents
88
pursuant to DIN EN 1253
Stainless steel, material 1.4301
With compression sealing flange for
sealing one sealing membrane
Warning! It is NOT possible to install
Gravity drainage
250
vertical drain has been installed!
364
With air lock made of PP
Optionally available uninsulated,
insulated with polystyrene or rock
wool, and optionally with/without
heating
Direct connection to ACO GM-X
73 pipe system
Syphonic drainage
145
Recess dimensions
76
Symphonic drainage
ACO Jet flat roof drains made of stainless steel with vertical outlet socket
DN 70
Contents
Flat roof drain for syphonic drainage
DN 70 with vertical outlet socket,
88
pursuant to DIN EN 1253
Stainless steel, material 1.4301
With two compression sealing
flanges for sealing two sealing mem-
80-250
branes
Gravity drainage
With air lock made of PP
Optionally available uninsulated, insu-
lated with polystyrene or rock wool,
and optionally with/without heating
max.250
364
system
73
Syphonic drainage
145
Parking deck
uninsulated 5,9 0174.46.90
drainage
insulated (polystyrene) 6,0 0174.46.92
insulated (rock wool) 6,0 0174.46.94
insulated (polystyrene) heatable 6,2 0174.46.95
insulated (rock wool) heatable 6,2 0174.46.97
drainage
For drain bodies without insulating bodies
DN 70 340 90 10 0174.46.90
For drain bodies with insulating bodies
0174.46.92
0174.46.94
DN 70 340 290 10
0174.46.95
0174.46.97
Facade drainage
Recess dimensions
77
Symphonic drainage
ACO Jet flat roof drains made of stainless steel with vertical outlet socket
DN 70
Contents
88
DN 70 with vertical outlet socket,
pursuant to DIN EN 1253
Stainless steel, material 1.4301
With two compression sealing
80-250
flanges for sealing two sealing mem-
branes
Gravity drainage
370
Syphonic drainage
73
145
Recess dimensions
78
Symphonic drainage
ACO Jet flat roof drains made of stainless steel with vertical outlet socket
DN 100
Contents
Flat roof drain for syphonic drainage
DN 100 with vertical outlet socket,
98
pursuant to DIN EN 1253
Stainless steel, material 1.4301
With compression sealing flange for
sealing one sealing membrane
Warning! It is NOT possible to install a
Gravity drainage
second sealing membrane after the
250
370
steel, material grade 304 and air
lock made of PP
Optionally available uninsulated, insu-
lated with polystyrene or rock wool,
and optionally with/without heating
Direct connection to ACO GM-X pipe
Syphonic drainage
system
103
205
Parking deck
uninsulated 4,9 1219.10.60
drainage
insulated (polystyrene) 5,1 1219.15.60
insulated (rock wool) 5,1 1219.17.60
insulated (polystyrene) heatable 5,3 1219.15.90
insulated (rock wool) heatable 5,3 1219.17.90
a
Core borehole dimensions
drainage
For drain bodies without insulating bodies
DN 100 340 110 10 1219.10.60
For drain bodies with insulating bodies
1219.15.60
1219.17.60
DN 100 340 290 10
1219.15.90
1219.17.90 c
Facade drainage
Recess dimensions
79
Symphonic drainage
ACO Jet flat roof drains made of stainless steel with vertical outlet socket
DN 100
Contents
98
DN 100 with vertical outlet socket,
pursuant to DIN EN 1253
Stainless steel, material 1.4301
With two compression sealing flanges
for sealing two sealing membranes
25-200
With a gravel basket from stainless
Gravity drainage
system
370
Syphonic drainage
103
205
a
Core borehole dimensions
Balcony and terrace
Recess dimensions
80
Symphonic drainage
ACO Jet flat roof drains made of stainless steel with horizontal outlet socket
DN 40 DN 70
Contents
Flat roof drains for syphonic
drainage DN 40, 50 or 70,
Horizontal outlet socket
Stainless steel, material 1.4301
With compression sealing flange
Airlock made of PP
Direct connection to ACO GM-X
Gravity drainage
pipe system
88
Syphonic drainage
H1
D
250
Parking deck
DN 40 42 63 5,2 1245.10.00
drainage
DN 50 53 71 8,5 1255.10.00
DN 70 73 92 16,1 1275.10.00
81
Symphonic drainage
Additional components
D: 73 mm 0174.46.69
sealing flange
370
DN 100,
D: 103 mm 0174.47.16
Positioning flange
Syphonic drainage
EPDM,
drainage
Thickness: 5 mm 0174.42.95
PVC-soft,
3
30 Thickness: 4 mm 0174.42.92
NBR/SBR,
Thickness: 4 mm 0174.42.97
Balcony and terrace
292
122 Air lock
drainage
96 polypropylene
DN 70 0174.46.74
96
DN 100 0174.75.50
13
10 128
171
Facade drainage
Pipe systems
82
Symphonic drainage
Contents
Mazeichnung Produktbeschreibung Ausfhrung Artikel-Nr.
Impoundment ring
323 stainless steel,
1,5 material 1.4301
0174.46.75
Gravity drainage
5,5
59
Gravel basket for
40
reversed roof
220
0153.60.01
Syphonic drainage
323
8
23
2
405
Control shaft
stainless steel,
120
80
material 1.4301,
Parking deck
10
drainage
460 dimensions: 400 x 400 mm,
height: 120 mm,
load class H 1.5 0153.73.05
460
83
Symphonic drainage
Contents
Lattice dimensions 30 x 10
Innenma B
Bauhhe:
Extension for Profiline
H
C
30 mm 38685
top section
steel, galvanised, Bauhhe:
for frame dimensions 60 mm 38687
400 x 400 mm
Syphonic drainage
Bauhhe:
120 mm 38689
92
Polystyrene insulation,
80
Balcony and terrace
PS 30
15
drains DN 70
250 1,5
0174.46.55
200 1,5
Facade drainage
73
168
Insulation for inlet cone,
160
polystyrene, PS 30
32
50
70
195
84
Symphonic drainage
Contents
Scale drawing Product description Model Article No.
250
class A1
for all Jet vertical flat roof 0174.46.57
drains DN 70
Gravity drainage
74
154
material class A1
For all Jet vertical flat roof 0174.81.22
160
drains DN 70 drain bodies
220
Syphonic drainage
205
Polystyrene insulation,
PS 30
150
5
105
Parking deck
drainage
Rock wool insulation,
construction material
250
class A1
for all Jet vertical flat roof
0174.47.21
drains DN 100
drainage
620 Mounting sheet for
trapezoidal sheet
215 metal roofs
steel, galvanised 0174.46.61
500
Facade drainage
Pipe systems
85
Symphonic drainage
Accessories
292
122 Air lock with fire protection
96 sealant
for jet drain body
DN 70 0174.77.30
96
Gravity drainage
13
10 128
171
Heat shield
stainless steel, for Jet flat
roof drains DN 70, with
76
impact dowel M 8, and 0174.77.97
hexagonal bolts M 8 x 16
Syphonic drainage
Insulating body
0
9 foam glass, for Jet vertical
flat roof drain lower parts
341
DN 70 0150.12.69
370 5
34
Parking deck
drainage
Insulating body
7
5 foam glass, for Jet vertical
341
1 drain bodies DN 70
68
0150.12.70
Balcony and terrace
370 5
34
drainage
Insulating body
20
foam glass, for Jet vertical
1
341
345
Facade drainage
370
145
Insulating sleeve
DN 70,
foam glass, for Jet vertical
height: 100 mm 0174.77.93
drain bodies and lower parts
for length adjustment
DN DN 100,
height: 150 mm 0174.77.94
Pipe systems
86
Notes
Symphonic drainage
87
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage