Professional Documents
Culture Documents
6
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage
Gravity drainage
Gravity drainage
7
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage
Gravity drainage
system. In roofs with two seals, the drain A stainless steel flat roof drain for two sealing membranes.
body is integrated with the vapour seal,
whilst the riser is in incorporated in the insulating bodies to prevent the formati- Planning must comply with
roof sealing membrane. The drains are on of of condensation water around the EN 12056-3, as well as the flat roof
fitted with compression sealing flanges drain body – this is particularly important regulations and, where applicable,
which allow them to be integrated within for thermally-insulated flat roofs, green the green roof regulations.
all standard sealing membranes. roofs and parking decks.
The drain bodies are installed in special
Parking deck
drainage
Balcony and terrace
drainage
Facade drainage
Pipe systems
8
Gravity drainage
Contents
Gravity drainage
Roof drainage Roof drains are integrated within the roof
General sealing membranes by fixed and loose flan-
Drainage can be implemented using ges, adhesive flanges or integrated connec-
roof drains or roof gutters hung in ting membranes. The connecting membra-
front of the roofs with appropriate nes must be suitable for the specific roof
eaves. Internal drainage is recommen sealing membrane used in each case.
ded for roofs with gentle slopes
(up to 5°). Pre-fabricated roof drains must
Syphonic drainage
comply with EN 1253.
Roof surfaces with internal drainage
systems must have at least two drains In the case of green roofs, there should be
or one drain and a safety overflow in- no planting in the area immediately around
dependent of the size of the roof. the roof drains.
Emergency drainage
Roof drains Flat roof drainage systems must always be
The drains of internal roof drainage laid out in accordance with the reference
systems must be arranged at the rainfall figures. The reference rainfall can be
Parking deck
drainage
lowest points of the roof and capable exceeded during periods of heavy rainfall.
of being connected to the roof seal This can cause water to pool on the surface
with a permanent and watertight join. of a flat roof.
drainage
create no thermal bridge in the construction faces. It is forbidden to connect the emer-
of the roof. gency drainage system to the regular drai-
nage system.
Roof drains must be freely accessible
for maintenance purposes. Fire protection
Flat roof drains with fire protection are requi-
Roof drains must be fastened within red on flat roofs in accordance with state
Facade drainage
Calculating the number of flat roof drains and emergency roof drains
Type of roof – flow coefficient (C) Type of drained area Flow coefficient (C)
Local reference rainfall in litres/ Membrane roof 1.0
second and hectare Concrete roof 1.0
l/(s*ha) (r(D,T)) Gravel roof 0.5
Extensive greening under 10 cm layered structure 0.5
Effective roof area Intensive greening 0.3
In accordance with DIN 1986-100,
Chapter 14.2.4.1, calculating the effec- Reference rainfall
tive roof area must be based on the roof The variable reference rainfall r(D,T) The relevant reference rainfall for rainwa-
Syphonic drainage
area projected onto the floor plan. consists of two parameters: ter drainage in gravity drainage systems
r(5,5) is taken from KOSTRA/DWD 2000/1
D = rainfall duration in minutes in accordance with the specific location.
T = annuality of the reference rainfall
Abbreviations are explained as follows:
The reference rainfall for flat roof draina-
ge systems is based on a rainfall period
of 5 minutes and an annuality of five
years.
Calculations therefore refer to a refe-
Parking deck
drainage
Rainfall discharge
r(5,5) 5 minutes Every 5 years for gravity drainage
Balcony and terrace
systems
Rainwater discharge
drainage
fies that the nominal widths of the down- DIN 1986-100, Section 14.2.7.1 speci- flow rate of v = 0.7 m/s and a maxi-
pipes must not be smaller than the con- fies that single connecting pipes must be mum flow rate of v = 2.5 m/s. The
nected nominal width of the associated dimensioned in the same way as collecti- minimum gradient must be 1:DN.
flat roof drain or the collective connec- ve connecting pipes. However, the nomi- The limit for the level of fill
ting line. The rainwater downpipes can nal width of the pipes must not be smal- h/d1 is 0.7. Caution: collecting pipes
be calculated with a level of fill up to ler than the nominal width of the flat roof and buried pipes within buildings
f = 0.33. Downpipes with inclines ≥10° drain. In addition, collective connecting must be dimensioned with a level of
are ignored when calculating the draina- pipes must be dimensioned in the same fill of h/d1 = 0.7 taking into conside-
ge capacity. way as connecting lines. ration a minimum gradient of 0.5
Pipe systems
10 Bezug: CD-Rom über ITWH, Hannover. Im Anhang A von DIN 1986-100 befindet sich ein Auszug mit
Regenspenden für wichtige deutsche Städte.
Gravity drainage
Contents
Calculation example
Flat roof drain for gravity drainage system
A gravity rainwater drainage system for a These are:
flat roof is planned for a large warehouse Effective roof area (A) = 1.300 m2
in Rosenheim/Germany. The roof will Flow coefficient (C) for gravel
have an effective area of 1300 m2 and is covered roof = 0.5 in Table 9 pursu-
designed as an air-insulated roof with a ant to DIN 1986-100
Gravity drainage
gravel cover. Six buried pipeline connec- Reference rainfall r(5,5) for Rosenheim
tions are available to drain the roof. pursuant to KOSTRA-DWD = 452 l/
(s)* ha
The dimensioning figures for the rainwa- These figures are input into the following
ter drainage are selected in accordance formula to calculate the rainwater flow
with the parameters. capacity:
Syphonic drainage
r(5,5) C A Q
Preliminary considerations
for selecting the flat roof drains
Because the downpipes can be connec- roof drain DN 100 made of stainless
ted directly to the flat roof drains, verti- steel with a stainless steel gravel basket.
cal downpipes will be used. Gravel bas- According to the specifications table (see
Parking deck
drainage
kets are required to optimally drain the page 15) the flat roof drain has an out-
rainwater from the gravel roof. Drain bo- flow capacity of 5.6 l/s.
dies only require one compression-
sealing flange because the roof is air-in- The number of flat roof drains required is
sulated with only one sealing membrane. calculated from the rainwater outflow di-
These considerations and calculations vided by the outflow capacity of the flat
lead to the selection of the ACO Spin flat roof drain:
11
Gravity drainage
Emergency drainage
Contents
The water build-up heights required for Water build-up height example
flat roof drains for gravity drainage and The maximum water build-up height for a
the associated emergency drains are DN 150 flat roof drain is 45 mm.
specified in EN 1253-1, Table 10. The The emergency drainage system is
water build-up heights for nominal widths ctivated when this height of 45 mm is
of DN 70 – DN 150 are as follows: exceeded. The maximum water build-up
height at the emergency drain is again
Gravity drainage
The reference rainfall for the emergency drainage QNot is calculated using the following formula:
A
( r(5,100) – r (5,5) x C) x = QNot
10.000
Facade drainage
Caution: note that the reference rainfall The emergency drainage system on its
r(5,5) first has to be multiplied by the flow own should be capable of draining the
coefficient C before deducting the result 100-year rainfall if a building requires an
from the reference rainfall for the one unusual degree of protection
hundred year rainfall event r(5,100). (cf. EN 12056-3: 2001-01, Table 2).
Pipe systems
12
Gravity drainage
Contents
Calculation example
Emergency drainage for a gravity drainage system
A gravity rainwater drainage system for Effective roof area (A) = 1.300 m2
a flat roof is planned for a large ware- Flow coefficient (C) for gravel
house in Rosenheim/Germany. The roof covered roof = 0.5 in Table 9
will have an effective area of 1300 m2 pursuant to DIN 1986-100
and is designed as an air-insulated roof Reference rainfall for 100-year rain
Gravity drainage
with a gravel cover. r(5,100) für Rosenheim pursuant to
The dimensioning figures for the rainwater KOSTRA-DWD = 853 l/(s*ha)
drainage are selected in accordance with
the parameters. These are: This value is incorporated in the following
formula to calculate the rainwater flow
capacity.
1.300
Syphonic drainage
( 853 – 452 x 0.5 ) x = 81.51 l/s
1.0000
The Spin DN 100 Attika roof drain made The number of flat roof drains required
of stainless steel (Article No. is calculated by dividing the rainwater
0174.78.24) is selected for the emer- flow capacity for the emergency drainage
gency drainage in this example. The out- QEmer by the outflow capacity of the se-
flow capacity of this drain is 6.0 l/s ac- lected parapet roof drain:
cording to DIN.
Parking deck
Rainwater flow Outflow capacity Number of
drainage
capacity for emer- / of a selected flat = flat roof drains
gency drainage roof drain required
drainage
upwards. This means that 14 emergency
drains are required to properly drain the
roof area. To ensure that the volumes of
water which have to be drained during
an emergency are transferred to the
designated area, each parapet drain is
drained by a separate pipe.
Facade drainage
Pipe systems
13
Gravity drainage
Outflow capacity
Cast Iron
Cast iron
DN 70 Ball grating Flat grating Top section
top section
Syphonic drainage
Article No.
Nominal Article No. Article No. 5141.81.00 Article No.
Inclination Model
width 7000.09.00 7000.19.00 5141.87.00 5141.83.00
5141.89.00
DN 70 1.5° without upper part 6.0 l/s 5.4 l/s 5.2 l/s 4.8 l/s
DN 70 1.5° with upper part 5.5 l/s 4.4 l/s 4.2 l/s 3.8 l/s
DN 70 90° without upper part 7.0 l/s 6.7 l/s 6.2 l/s 5.8 l/s
DN 70 90° with upper part 6.5 l/s 5.7 l/s 5.2 l/s 4.8 l/s
DN 100 90° without upper part 8.0 l/s 6.2 l/s 10.7 l/s 7.6 l/s 15.2 l/s
DN 100 90° with upper part 8.0 l/s 6.2 l/s 10.7 l/s 7.6 l/s 15.2 l/s
drainage
DN 125 1.5° without upper part 12.0 l/s 10.2 l/s 12.6 l/s 7.6 l/s 16.4 l/s
DN 125 1.5° with upper part 12.0 l/s 10.2 l/s 12.6 l/s 7.6 l/s 16.4 l/s
DN 125 90° without upper part 12.0 l/s 10.2 l/s 12.6 l/s 7.6 l/s 16.4 l/s
DN 125 90° with upper part 12.0 l/s 10.0 l/s 12.6 l/s 7.6 l/s 16.4 l/s
14
Gravity drainage
Contents
Cast iron with fire protection insert
Gravity drainage
DN 100 90° without upper part 7.4 l/s 7.3 l/s 8.9 l/s 6.8 l/s 11.8 l/s
DN 100 90° with upper part 7.4 l/s 7.0 l/s 8.5 l/s 6.5 l/s 11.8 l/s
Stainless Steel
Syphonic drainage
Article No.
Nominal Article No.
Inclination Model 0174.46.59
width 0174.46.66
0174.46.62
DN 70 1.5° without lower part 2.6 l/s 2.7 l/s
DN 70 1.5° with lower part 2.8 l/s 3.0 l/s
DN 70 90° without lower part 2.5 l/s 2.6 l/s
DN 70 90° with lower part 2.7 l/s 2.8 l/s
DN 100
Parking deck
drainage
Plastic gravel basket Stainless steel gravel basket
Article No.
Nominal Article No.
Inclination Model 0174.46.59
width 0174.46.66
0174.46.62
DN 100 1.5° without lower part 5.0 l/s 5.9 l/s
DN 100 1.5° with lower part 4.7 l/s 5.3 l/s
drainage
DN 125
Plastic gravel basket Stainless steel gravel basket
Article No.
Nominal Article No.
Inclination Model 0174.46.59
width 0174.46.66
0174.46.62
Facade drainage
DN 100
Stainless steel gravel basket
Pipe systems
Article No.
Nominal
Inclination Model 0174.46.59
width
0174.46.62
DN 100 90° without lower part 4.7 l/s
DN 100 90° with lower part 4.7 l/s
15
Gravity drainage
The countryside is being increasingly pa- There are two main types of green roof: ACO developed a range of additional
ved over as built-up areas grow more ex- Extensive greening: components to ensure the safe and
tensive. The associated faster run-off of Extensive greening can generally regulated drainage of percolated rainwa-
rainwater gives rise to high water levels be achieved with a minimum amount ter. This range can be combined with the
and flooding and the associated serious of effort. These roofs are characte- standard flat roof drainage products.
damage. Greened roofs make it possible rised by a natural looking vegetation
to retain at least 50 % of the yearly ave- cover with plants adapted to extreme
Gravity drainage
Extensive greening
Pipe systems
16
Gravity drainage
Contents
Regulations and standards
Regulations and standards must be
observed when planning and executing
roof drainage systems. The following
lists a number of extracts from the most
important regulations:
Gravity drainage
Roof greening regulations
version 2008/DIN 1986-100
Syphonic drainage
hinder drainage in any way. The drains
can be protected by gravel or paved sur-
rounds (Roof greening regulations, Chap-
ter 6.5.3.1).
Extensive greening
DIN 1986-100 (Chapter 5.8.3) also spe-
cifies in the same way as the Roof gree-
ning regulations that drains must be pro-
tected from the encroachment of plants.
For instance, this standard recommends
Parking deck
drainage
that the drains are surrounded by an at
least 50 cm wide gravel protection zone.
drainage
tering the drain (Roof greening regulati-
ons, Chapter 6.5.3.2).
Emergency drainage
Caution: Ensure that the layered struc-
ture of the green roof does not block the
inflows to the emergency drains. Emer-
Facade drainage
17
Intensive greening
Gravity drainage
Installation
b
ters and two different heights have to be be cut to enable the sealing membrane to
cut to install the flat roof drains. be laid towards the drain body with a
Ø a x b: core borehole dimensions gradient as stipulated in DIN EN 18195.
for the flange (flange support) Each of the product pages contains the
Ø c: core borehole dimension for dimensions of the core boreholes requi-
the drain body red for the product.
Øc
Parking deck
drainage
Contents
Heating
Flat roof drains can also be installed
with auxiliary heating to prevent the drain
from freezing. To reduce energy con-
sumption to a minimum, it is recommen-
ded that the heated drains be controlled
by an additional thermostat. Installation
Gravity drainage
of an FI switch (30 mA) is recommended.
When Spin two-piece cast iron flat roof
drains are installed, the heating is always
installed on the drain body (below the lo-
wer sealing level).
Syphonic drainage
2-piece Spin flat roof drain with heating (Article No. 7000.85.00) and thermostat (not supplied)
Parking deck
drainage
the sealing membrane must be put into
place when connecting thin high polymer
sea-ling membranes to the compression
sea-ling flange. These spacers ensure
that any unevenness in the fixed and loo-
se flanges on the drain are compensated
for to ensure that a watertight seal is
drainage
site from spare material from the same
sealing membrane.
DN 100 DN 125
Max. H: as needed with spigot pipe
min. 40 mm
The upper parts for cast iron flat roof Sealing ring
Article No. 5288.20.90
drains are always supplied as standard
with a sealing ring. This is installed be- Drain body
tween the drain body and the upper part.
19
Gravity drainage
Pipe connections
CV connector
GM-X pipe with coupling socket
transition 0174.14.26
Gravity drainage
DN 100
Syphonic drainage
DN 125
drainage
DN 150
20
Gravity drainage
Installation
Contents
Concrete roof: Pouring in
Flat roof drains can be installed on site
when the concrete is poured in. Caution:
Ensure that the fixed flange is positioned
slightly below the top surface of the con-
crete because a gradient towards the
drain body must be created when the
Gravity drainage
sealing membrane is installed.
Syphonic drainage
Øa
Concrete roof: Core boreholes
b
Core boreholes with two different diame- The core hole for the flange support must
ters and two different heights have to be be cut to enable the sealing membrane
cut to install the flat roof drains. to be laid towards the drain body with a
Ø a x b: core borehole dimensions for gradient as stipulated in DIN EN 18195.
the flange (flange support)
Ø c: core borehole dimension for the
drain body
Parking deck
drainage
Øc
drainage
sheet roofing must be connected pursu-
ant to DIN 18807. The fastening plate
must be connected to the trapezoidal
sheet roof as follows:
Two connecting elements on the Fastening plate
transverse side in the top beam
One connecting element next to
Facade drainage
Insulating body
21
Gravity drainage
Contents
Heating
Flat roof drains can also be installed
with auxiliary heating to prevent the drain
from freezing. To reduce energy con-
sumption to a minimum, it is recommen-
ded that the heated drains be controlled
by an additional thermostat. Installation
Gravity drainage
2-piece Spin flat roof drain with heating (Article No. 0174.84.32) and thermostat (not supplied)
22
Gravity drainage
Pipe connections
Contents
Pipe type With transition elements Suitable for connection to
DN 70
Gravity drainage
Spin flat roof drain made
Spigot pipe with no coupling socket Connector fitting Article No. 0174.12.82
of stainless steel DN 70
DN 100
Syphonic drainage
GM-X pipe with coupling socket Direct connection
Parking deck
DN 125
drainage
GM-X pipe with coupling socket Direct connection
drainage
HT pipe with coupling socket Connector fitting Article No. 0174.13.00
Facade drainage
Pipe systems
23
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of cast iron
Contents
1
Gravity drainage
Sealing membrane
3
2 4
Trapezoidal sheet
Syphonic drainage
metal roof
Covecta Vertrieb
Cast iron flat roof drain
2 Burgsteige 35
DN 100, 90 ° 73326 Deggingen
Article No. 7034.10.10 Germany
Tel. +49 (0) 7334 8012
Balcony and terrace
drainage
DN 70 DN 100–DN 150
95
75
Facade drainage
195
230
Pipe systems
The outlet socket of the drain body can be shortened on site by The outlet socket of the drain body can be shortened on site by
max. 44 mm. max. 35 mm.
Extension heights in mm
24
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of cast iron
Contents
1
Gravel layer
Gravity drainage
2
4
3
Sealing membrane
Insulation
8
6
Syphonic drainage
Sealing membrane
7 (vapour seal)
Parking deck
drainage
Article No. 7034.10.10
2 Top ring 5 Levelling element
Article No. 7000.35.00 Article No. 7040.01.00 8 Insulating mounting
Article No. 7040.21.00
3 Upper part 6 Heating
Article No. 7044.10.25 Article No. 7000.85.00
Facade drainage
50–200
70–200
195
230
Pipe systems
The outlet socket of the drain body can be shortened on site by The outlet socket of the drain body can be shortened on site by
max. 44 mm. max. 35 mm.
Extension heights in mm
25
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of cast iron
Contents
1
Gravity drainage
3
Soil
4
6
Filter fleece
5
Drain layer
Sealing membrane
Syphonic drainage
Ceiling (thickness
according to the
structural enginee-
ring specifications)
1 Frame with cast iron grating 3 Transition frame 5 Cast iron flat roof drain
Article No. 7000.51.00 Article No. 7000.55.00 DN 100, 90 °
Parking deck
drainage
DN 70 DN 100–DN 150
26
26
60
60
Facade drainage
60
60
195
230
Pipe systems
The outlet socket of the drain body can be shortened on site by The outlet socket of the drain body can be shortened on site by
max. 44 mm. max. 35 mm.
Extension heights in mm
26
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of cast iron
Contents
1
Gravity drainage
4 3
Soil
6
8
Filter fleece
Drainage layer
Syphonic drainage
9
Sealing membrane
10
7
Insulation
Parking deck
drainage
Intermediate section 6 Upper part 9 Levelling element
2 Article No. 7000.52.00 Article No. 7044.10.25 Article No. 7040.01.00
4 Article No. 7000.54.00
7 Cast iron flat roof drain 10 Insulating
mounting
3 Bucket DN 100, 90° Article No. 7040.21.00
Article No. 7000.53.00 Article No. 7034.10.10
60 26
250
250
Facade drainage
50–200 60
60
70–200
230
195
Pipe systems
Additional spacers (Article No. 7000.54.00) height: 250 mm, can be stacked on top of one another to match the thickness of the
soil on green roofs.
Extension heights in mm
27
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of stainless steel
Contents
Gravity drainage
3
Syphonic drainage
Sealing membrane
2
Ceiling (thickness
according to the
structural enginee-
ring specifications)
Complete drain Article No. 1119.10.60 2 Stainless steel flat roof drain Accessories:
consisting of: DN 100, 90° Fire protection insert
3
Parking deck
drainage
DN 70–DN 125
drainage
370
Pipe systems
The extension height of 110 mm is the same for the stainless steel gravel basket (shown on the right of the diagram) and the plastic gravel
basket (shown on the left of the diagram). Attention! The fire protection insert is only available for the vertical Spin flat roof drain DN 100.
Extension heights in mm
28
Gravity drainage
Gravity drainage with ACO Spin flat roof drain made of stainless steel
Contents
1
Gravity drainage
3 Sealing membrane
6
Insulation
5
Sealing membrane
Syphonic drainage
(Damp proof membrane)
4
Complete drain Article No. 3 Upper part DN 100 5 Polystyrene insulation DN 100
1119.25.10 consisting of: Article No. 0174.47.31 Article No. 0174.47.19
Parking deck
drainage
1 Plastic gravel basket
Article No. 0174.46.66 4
Lower part for flat roof drain Accessories:
DN 100, 90° 6 Polystyrene insulation DN 100
2 Fastening frame for gravel basket Article No. 0174.47.16 Article No. 0174.47.19
Article No. 0174.46.67
7 Mounting sheet
Article No. 0174.46.61
Facade drainage
25–200
Pipe systems
370
The extension height of 110 mm is the same for the stainless steel gravel basket (shown on the right of the diagram) and the plas-
tic gravel basket (shown on the left of the diagram).
29
Extension heights in mm
Gravity drainage
Modular system
ACO Spin flat roof drain DN 70 made of cast iron for gravity drainage
Contents
Top section
frame with
Ball grating Flat grating grating L 15 Top section frame with grating M 125 Top section
Gravity drainage
Top section
ring
Upper part
Height adapter
Sealing ring
Parking deck
drainage
Impoundment pipe
Insulating
ring
Balcony and terrace
Levelling
drainage
element
Facade drainage
Loose flange
Drain body
Pipe systems
Flat roof
heating
Insulating body
30
Gravity drainage
DN 70/DN 80
Contents
Drain body DN 70 – DN 80
pursuant to DIN EN 1253
Cast iron, construction material
class A1, coated
With compression sealing flange
and seepage openings
Can be connected to spigot pipe
Gravity drainage
pursuant to DIN 19522 / DIN EN 877
Weight approx. 7.5 kg
Ø290
Syphonic drainage
Ø290
Ø150
195
54
DN70
87
225
76
DN70
Parking deck
drainage
Model with vertical outlet socket Model with horizontal outlet socket
Recess dimensions
31
Gravity drainage
Extension components
Ø290
Ø150 Upper part
Ø142 Cast iron, DN 70 for sealing
with two sealing membranes,
with compression sealing
70
Gravity drainage
250
DN100 40
Insulating body
Syphonic drainage
120
7040.22.00
270
316
Parking deck
290
drainage
40
Insulating body
130
7040.34.00
drainage
300
200
140
300
Insulating ring
Facade drainage
Levelling element
□300 For upper part of flat
Pipe systems
Ø145
roof drain, DN 70,
50
32
Gravity drainage
Contents
Scale drawing Product description Model Article No.
Bucket
Ø124 Stainless steel,
8
material 1.4301,
fits cast iron flat roof 7000.03.00
55
Gravity drainage
drain DN 70
Ø83
Hose element
DN 70/ 80
For connecting DN 70
25
Syphonic drainage
Flat roof heating
Suitable for all flat roof
drains DN 50 – DN 150,
Electrical supply:
220-240 V AC,
Nominal power: 25 W, 7000.85.00
Parking deck
Protection class: I,
drainage
Protection type: IP 67,
Connecting cable:
SIHF 3 x 1 mm2,
1.5 m G 1.5
Ø160
drainage
35
two-piece drains
Ø136
11
Facade drainage
Pipe systems
33
Gravity drainage
14
73
84
roof drains DN 70,
Ø139
external dimensions:
Gravity drainage
,5
14
14
Ø138
10 Flat grating
cast iron, fits all Spin flat
10
Syphonic drainage
Ø152
10 Grating
21
external dimensions:
Class M125 7000.08.00
Ø 152 mm
Balcony and terrace
Top ring
drainage
7000.09.00
7000.19.00
7000.43.00
Facade drainage
Top ring
Ø150
Cast iron, fits grating
21
200
Pipe systems
cast iron
Class L15 7000.43.00
10
34
Gravity drainage
Contents
Scale drawing Product description Model Article No.
□240
□197 Top section
48
cast iron,
116
frame dimensions:
Ø125 197 mm, Class M125 5141.83.00
Gravity drainage
top section and frame,
13
cast iron, slotted cast iron
grating
Top frame
cast iron,
□197 fits top section Article No.
5141.83.00
Class M125 5095.80.00
46
Syphonic drainage
□148
Top section
stainless steel, With
115
Parking deck
8
drainage
frame dimensions: anti-slip surface 5141.89.11
148 mm
□148
10
Height adjusta-
frame dimensions:
bility:
148 mm
drainage
133 stainless steel top section
35–130 mm 0154.55.78
□142 and slotted lid
35–225 mm 0154.83.39
Facade drainage
Pipe systems
35
Gravity drainage
Modular system
ACO Spin flat roof drain DN 100 – DN 150 made of cast iron for gravity drainage
Contents
Top ring
Height adapter
Impoundment
Syphonic drainage
pipe
Upper part
with loose flange
and seal
Parking deck
drainage
Insulating
ring
Balcony and terrace
Levelling
element
drainage
Loose flange
Facade drainage
Drain body
Insulating body
Pipe systems
36
Gravity drainage
DN 100 – DN 150
Contents
Drain body DN 100 – DN 150
pursuant to DIN EN 1253
Cast iron, construction material
class A1, coated
With compression sealing flange
and seepage openings
Can be connected to spigot pipe
Gravity drainage
pursuant to DIN 19522 / DIN EN 877
10
10
35
35
35
Ø182 Ø182 Ø182
Syphonic drainage
124
124
124
Ø275 Ø275 Ø275
230
230
230
Parking deck
drainage
Ø360 Ø360 Ø360
Ø200 Ø200 Ø200
76
100
113
118
151
176
310
drainage
Nominal width DN 100 DN 125 DN 150
Weight 15.2 kg 15.7 kg 18.2 kg
Article No. 7054.11.10 7055.11.10 7056.11.10
Recess dimensions
Additional components
ACO Spin flat roof drain DN 100 – DN 150 made of cast iron
Contents
Ø360
Upper part
Ø200
cast iron, DN 100-DN 150
for sealing with two sealing
membranes, with compres-
Gravity drainage
Ø 368
Insulating body
60
130
7040.21.00
400
266
430
Parking deck
drainage
70
Isolating plate
Ø115 foam glass
265 x 265 mm for Spin flat
roof drain DN 100 – DN 150
7040.23.00
made of cast iron with insula-
□ 265
Heat shield
with impact dowels M 8 x 16
for Spin flat roof drain
440
DN 100,
Insulating body
□420 height: 170 mm
for flat roof drain with 7040.31.00
60
height: 215 mm
7040.32.00
125
Pipe systems
38
Gravity drainage
Contents
Scale drawing Product description Model Article No.
Insulating ring
□450 for flat roof drain upper part
100
DN 100 – DN 150, foam
glass 7040.11.00
Gravity drainage
Ø220
levelling element
□450 for flat roof upper part
DN 100 – DN 150,
50
Syphonic drainage
Ø220
Bucket
182 stainless steel, material
62
Parking deck
drainage
Flat roof heating
Suitable for all flat roof
drains DN 50 – DN 150,
Electrical supply:
drainage
Protection class: I,
Protection type: IP 67,
Connecting cable:
SIHF 3 x 1 mm2,
1.5 m G 1.5
Ø127
Fire protection insert
Facade drainage
39
Gravity drainage
ACO Spin flat roof drains DN 100 – DN 150 made of cast iron
Contents
Ball grating
90
cast iron, fits all Spin flat
12 roof drains DN 100 –
168
186 DN 150,
Gravity drainage
Ø 200
15 Stacking frame
with grating
Syphonic drainage
45
Top ring
Ø199
Ø189
cast iron, fits Article No.
Parking deck
7000.46.00
45
drainage
Ø185
15
Flat grating
Balcony and terrace
Top ring
Facade drainage
Ø200
cast iron, fits
Ø189
Article Nos. 7000.10.00, Height: 25 mm 7000.25.00
H
7000.20.00, 7000.39.00
and 7000.40.00 Height: 35 mm 7000.35.00
□200
40
Top frame
cast iron, with slotted grating
Pipe systems
Frame dimensions:
200 x 200 mm
Class L15 7000.40.00
40 10
Gravity drainage
Contents
Scale drawing Product description Model Article No.
□296
Top frame
Class M125,
44
80
cast iron, with slotted grating
16 Frame dimensions:
unbolted 7000.41.00
296 mm
Gravity drainage
bolted 7000.42.00
10
Top frame
M
PA
-K
l.
Syphonic drainage
Frame dimensions:
locked 7000.46.00
□282 300 x 300 mm
75 20
Ø180
□200
Top frame
40
cast iron,
with slotted grating,
10 Frame dimensions:
Class L15 7000.39.00
Parking deck
200 x 200 mm
drainage
Ø113
Transition ring
drainage
Class K3 7000.31.00
Build height: 24 mm
46
Ø 184
□196
MEKU top section
158
frame dimensions:
Facade drainage
Ø135
for Spin flat roof drains two-piece 7044.10.50
35
DN 125/DN150,
one-piece 7035.10.50
45 mm,
DN 125/150,
two-piece 7045.10.50
41
Gravity drainage
26
Frame with slotted grating
with boltless locking,
cast iron, coated,
frame dimensions: Class
7000.51.00
L15/M125
Gravity drainage
300 mm
L15/M125
17
frame dimensions:
300 mm
□282
Intermediate sections
60
polymer concrete,
□254 height: 60 mm
Class
7000.52.00
Parking deck
L15/M125
drainage
□282
Intermediate section
Balcony and terrace
polymer concrete,
height: 250 mm
drainage
250
□254
Class
7000.54.00
L15/M125
Facade drainage
Pipe systems
42
Gravity drainage
Contents
Scale drawing Product description Model Article No.
□280
40
Adapter frame
polymer concrete
60
height: 60 mm
25
□311
Gravity drainage
Class L15 7000.55.00
□332
40
Adapter frame
100
polymer concrete
Syphonic drainage
□550
25
height: 100 mm
Ø216 Bucket
Parking deck
polypropylene
drainage
for top sections
min 180 mm 7000.53.00
150
in combination with
Article No. 7000.50.00
and 7000.51.00
drainage
Ø124
Stainless steel
8
Bucket
182 stainless steel,
62
43
Gravity drainage
Modular system
ACO Spin flat roof drains made of stainless steel for gravity drainage
Contents
Gravel basket Impoundment ring Gravel basket top section Gravel basket top section
Plastic
holder
Gravity drainage
Syphonic drainage
Drain body
with loose flange
and flange seal
Parking deck
Loose flange
drainage
Flange seal
Balcony and terrace
drainage
Insulation /
Insulating body
made of: Polystyrene Polystyrene Rockwool Polystyrene
44
Gravity drainage
ACO Spin flat roof drains made of stainless steel with vertical outlet socket
DN 70 – DN 125
Contents
Flat roof drain DN 70 – DN 125 with
vertical outlet socket pursuant to DIN
110
EN 1253
Stainless steel, material 1.4301
With compression sealing flange for
sealing one sealing membrane
Warning! It is NOT possible to install
Gravity drainage
250
370
Sarnafil TG 66-15
for loose placement
for greened, gravelled roofs with
foot and vehicle traffic
for roofs with additional loads
Sikaplan 15 G
ØD
for loose placement with
Syphonic drainage
205
mechanical fixing
up to a roof gradient of
maximum 20%
for roofs without additional loads
Parking deck
uninsulated 73 4.5 1179.10.60 1179.10.62 1179.10.67 3.7 1179.10.10 1179.10.12 1179.10.17
drainage
polystyrene 73 4.7 1179.15.60 1179.15.62 1179.15.67 3.9 1179.15.10 1179.15.12 1179.15.17
DN
rock wool 73 4.7 1179.17.60 1179.17.62 1179.17.67 3.9 1179.17.10 1179.17.12 1179.17.17
70
polystyrene, heated 73 4.9 1179.15.90 1179.15.92 1179.15.97 4.1 1179.15.40 1179.15.42 1179.15.47
rock wool, heated 73 4.9 1179.17.90 1179.17.92 1179.17.97 4.1 1179.17.40 1179.17.42 1179.17.47
uninsulated 103 4.9 1119.10.60 1119.10.62 1119.10.67 4.1 1119.10.10 1119.10.12 1119.10.17
polystyrene 103 5.0 1119.15.60 1119.15.62 1119.15.67 4.2 1119.15.10 1119.15.12 1119.15.17
DN
drainage
rock wool, heated 103 5.2 1119.17.90 1119.17.92 1119.17.97 4.4 1119.17.40 1119.17.42 1119.17.47
uninsulated 133 5.9 1129.10.60 1129.10.62 1129.10.67 5.1 1129.10.10 1129.10.12 1129.10.17
polystyrene 133 6.0 1129.15.60 1129.15.62 1129.15.67 5.2 1129.15.10 1129.15.12 1129.15.17
DN
rock wool 133 6.0 1129.17.60 1129.17.62 1129.17.67 5.2 1129.17.10 1129.17.12 1129.17.17
125
polystyrene, heated 133 6.2 1129.15.90 1129.15.92 1129.15.97 5.4 1129.15.40 1129.15.42 1129.15.47
rock wool, heated 133 6.2 1129.17.90 1129.17.92 1129.17.97 5.4 1129.17.40 1129.17.42 1129.17.47
Øa
Recess dimensions
ACO Spin flat roof drains made of stainless steel with vertical outlet socket
DN 70 – DN 125
Contents
110
vertical outlet socket pursuant to
DIN EN 1253
Stainless steel, material 1.4301
With two compression sealing
50-300
flanges for sealing with two sealing
membranes
Gravity drainage
Sarnafil TG 66-15
for loose placement
for greened, gravelled roofs with
foot and vehicle traffic
for roofs with additional loads
251
Sikaplan 15 G
370
for loose placement with
mechanical fixing
up to a roof gradient of
Syphonic drainage
maximum 20%
for roofs without additional loads
ØD
205
polystyrene 103 8.2 1119.25.60 1119.25.65 1119.25.69 7.1 1119.25.10 1119.25.15 1119.25.19
DN
rock wool 103 8.2 1119.27.60 1119.27.65 1119.27.69 7.1 1119.27.10 1119.27.15 1119.27.19
100
drainage
polystyrene, heated 103 8.4 1119.25.90 1119.25.95 1119.25.99 7.3 1119.25.40 1119.25.45 1119.25.49
rock wool, heated 103 8.4 1119.27.90 1119.27.95 1119.27.99 7.3 1119.27.40 1119.27.45 1119.27.49
uninsulated 133 9.5 1129.20.60 1129.20.65 1129.20.69 8.6 1129.20.10 1129.20.15 1129.20.19
polystyrene 133 9.6 1129.25.60 1129.25.65 1129.25.69 8.8 1129.25.10 1129.25.15 1129.25.19
DN
rock wool 133 9.6 1129.27.60 1129.27.65 1129.27.69 8.8 1129.27.10 1129.27.15 1129.27.19
125
polystyrene, heated 133 9.8 1129.25.90 1129.25.95 1129.25.99 9.0 1129.25.40 1129.25.45 1129.25.49
rock wool, heated 133 9.8 1129.27.90 1129.27.95 1129.27.99 9.0 1129.27.40 1129.27.45 1129.27.49
Facade drainage
Øa
Core borehole dimensions
b
Recess dimensions
ACO Spin flat roof drains made of stainless steel with lateral outlet socket
DN 70 – DN 125
Contents
Flat roof drain DN 70 – DN 125 with Sarnafil TG 66-15
lateral outlet socket pursuant to DIN for loose placement
EN 1253 for greened, gravelled roofs with
Stainless steel, material 1.4301 foot and vehicle traffic
With compression sealing flange for for roofs with additional loads
sealing one sealing membrane Sikaplan 15 G
Optionally available with a gravel bas- for loose placement with
Gravity drainage
ket made of plastic or stainless steel mechanical fixing
up to a roof gradient of
maximum 20%
for roofs without additional loads
110
Syphonic drainage
h1
h3
ØD
h2
l1
LxB L x B = DN 70: 260 x 190
DN 100/125: 280 x 230
Parking deck
drainage
76 Stainless steel gravel basket Plastic gravel basket
Nomi-
nal Sarnafil
without ceiling Sikaplan without ceiling Sarnafil Sikaplan
D Weight Weight
Width Model h1 h2 h3 l1 membrane TG 66-15 15 G membrane TG 66-15 15 G
[mm] [kg] [kg]
Article No. Article No. Article No. Article No. Article No. Article No.
uninsulated 73 95 45 140 213 4.4 1175.10.60 1175.10.62 1175.10.67 3.7 1175.10.10 1175.10.12 1175.10.17
polystyrene 73 95 45 140 213 4.6 1175.15.60 1175.15.62 1175.15.67 3.9 1175.15.10 1175.15.12 1175.15.17
DN
drainage
rock wool, heated 73 95 45 140 213 4.8 1175.17.90 1175.17.92 1175.17.97 4.1 1175.17.40 1175.17.42 1175.17.47
uninsulated 103 104 66 170 226 4.9 1115.10.60 1115.10.62 1115.10.67 4.1 1115.10.10 1115.10.12 1115.10.17
polystyrene 103 104 66 170 226 5.1 1115.15.60 1115.15.62 1115.15.67 4.2 1115.15.10 1115.15.12 1115.15.17
DN
rock wool 103 104 66 170 226 5.1 1115.17.60 1115.17.62 1115.17.67 4.2 1115.17.10 1115.17.12 1115.17.17
100
polystyrene, heated 103 104 66 170 226 5.3 1115.15.90 1115.15.92 1115.15.97 4.4 1115.15.40 1115.15.42 1115.15.47
rock wool, heated 103 104 66 170 226 5.3 1115.17.90 1115.17.92 1115.17.97 4.4 1115.17.40 1115.17.42 1115.17.47
uninsulated 133 124 76 200 230 5.6 1125.10.60 1125.10.62 1125.10.67 5.1 1125.10.10 1125.10.12 1125.10.17
polystyrene 133 124 76 200 230 5.8 1125.15.60 1125.15.62 1125.15.67 5.2 1125.15.10 1125.15.12 1125.15.17
Facade drainage
DN
rock wool 133 124 76 200 230 5.8 1125.17.60 1125.17.62 1125.17.67 5.2 1125.17.10 1125.17.12 1125.17.17
125
polystyrene, heated 133 124 76 200 230 6.0 1125.15.90 1125.15.92 1125.15.97 5.4 1125.15.40 1125.15.42 1125.15.47
rock wool, heated 133 124 76 200 230 6.0 1125.17.90 1125.17.92 1125.17.97 5.4 1125.17.40 1125.17.42 1125.17.47
Recess dimensions
47
Gravity drainage
ACO Spin flat roof drains made of stainless steel with lateral outlet socket DN 70 –
DN 125
Contents
110
EN 1253
Stainless steel, material 1.4301
With two compression sealing
flanges for sealing with two sealing
50-300
membranes
Gravity drainage
Sarnafil TG 66-15
for loose placement
for greened, gravelled roofs with
foot and vehicle traffic
for roofs with additional loads
h1
Sikaplan 15 G
h3
ØD
h2
mechanical fixing
up to a roof gradient of
Syphonic drainage
l1
LxB maximum 20%
for roofs without additional loads
L x B = DN 70: 260 x 190
DN 100/125: 280 x 230
uninsulated 73 95 118 140 213 7.1 1175.20.60 1175.20.65 1175.20.69 6.4 1175.20.10 1175.20.15 1175.20.19
drainage
polystyrene 73 95 118 140 213 7.3 1175.25.60 1175.25.65 1175.25.69 6.6 1175.25.10 1175.25.15 1175.25.19
DN
rock wool 73 95 118 140 213 7.5 1175.27.60 1175.27.65 1175.27.69 6.8 1175.27.10 1175.27.15 1175.27.19
70
polystyrene, heated 73 95 118 140 213 7.3 1175.25.90 1175.25.95 1175.25.99 6.6 1175.25.40 1175.25.45 1175.25.49
rock wool, heated 73 95 118 140 213 7.5 1175.27.90 1175.27.95 1175.27.99 6.8 1175.27.40 1175.27.45 1175.27.49
uninsulated 103 104 148 170 226 7.6 1115.20.60 1115.20.65 1115.20.69 6.8 1115.20.10 1115.20.15 1115.20.19
polystyrene 103 104 148 170 226 7.8 1115.25.60 1115.25.65 1115.25.69 6.9 1115.25.10 1115.25.15 1115.25.19
DN
Balcony and terrace
rock wool 103 104 148 170 226 8.0 1115.27.60 1115.27.65 1115.27.69 7.1 1115.27.10 1115.27.15 1115.27.19
100
polystyrene, heated 103 104 148 170 226 7.8 1115.25.90 1115.25.95 1115.25.99 6.9 1115.25.40 1115.25.45 1115.25.49
drainage
rock wool, heated 103 104 148 170 226 8.0 1115.27.90 1115.27.95 1115.27.99 7.1 1115.27.40 1115.27.45 1115.27.49
uninsulated 133 124 178 200 230 8.3 1125.20.60 1125.20.65 1125.20.69 7.8 1125.20.10 1125.20.15 1125.20.19
polystyrene 133 124 178 200 230 8.5 1125.25.60 1125.25.65 1125.25.69 7.9 1125.25.10 1125.25.15 1125.25.19
DN
rock wool 133 124 178 200 230 8.7 1125.27.60 1125.27.65 1125.27.69 8.1 1125.27.10 1125.27.15 1125.27.19
125
polystyrene, heated 133 124 178 200 230 8.5 1125.25.90 1125.25.95 1125.25.99 7.9 1125.25.40 1125.25.45 1125.25.49
rock wool, heated 133 124 178 200 230 8.7 1125.27.90 1125.27.95 1125.27.99 8.1 1125.27.40 1125.27.45 1125.27.49
Facade drainage
Recess dimensions
48
Gravity drainage
Additional components
Contents
Scale drawing Product description Model Article No.
Ø332
Ø233
Drain body for a one-pie-
ce or two-piece flat roof
drain with vertical or hori- DN 70
zontal outlet socket (d= 73 mm) 0174.47.30
Gravity drainage
stainless steel, material
1.4301, with compression DN 100
370
sealing flange. (d= 103 mm) 0174.47.31
Syphonic drainage
Lower part for two-piece
flat roof drain
DN 70
stainless steel, material
(d= 73 mm) 0174.47.15
1.4301 with compression
sealing flange
DN 100
370
DN 125
Parking deck
(d= 133 mm) 0174.47.17
drainage
d
95
(d= 73 mm)
124
131
118
Ø73
drainage
213 1.4301, with compression
sealing flange
DN 100
104
Facade drainage
0174.48.04
147
outlet socket
153
155
Ø103
124
0174.48.11
191
outlet socket
178
184
49
Gravity drainage
Positioning flange
Contents
EPDM,
Flange seal
Gravity drainage
thickness: 4 mm 0174.42.87
EPDM,
thickness: 5 mm 0174.42.95
3 PVC-soft,
30
thickness: 4 mm 0174.42.92
NBR/SBR,
thickness: 4 mm 0174.42.97
Gravel basket
Syphonic drainage
Ø271
stainless steel, fits all Height: 75 mm 0174.46.63
Spin flat roof drains made
4,5
of stainless steel
h
reversed roof
220
13
material 1.4301,
drainage
Control shaft
Ø23
2
stainless steel,
material 1.4301, 0153.73.05
Balcony and terrace
120
Ø170
Ø110
99
0174.87.36
fits all Spin flat roof drains
made of stainless steel
254
Pipe systems
50
Gravity drainage
DN 70/DN100,
Impoundment ring Height: 35 mm 0174.46.76
Ø323
Contents
stainless steel, material
35
1.4301 DN 125,
Height: 45 mm 0174.46.77
5,5
78-108 Profiline top section
□A
steel, galvanised,
dimensions: 400 x 400 mm
Gravity drainage
height adjustable from 38801
78–108 mm
Height:
Extension for Profiline top
30 mm 38685
section
for frame dimensions
Height:
H
Syphonic drainage
400 x 400 mm
C
60 mm 38687
Height:
120 mm 38689
Parking deck
drainage
Nominal power: 25 W,
Protection class: I,
Protection type: IP 67, Cables:
SIHF 3 x 1 mm2, 1.5 m G 1.5
drainage
for all vertical drain bodies DN 125 0174.47.22
Spin and lower parts
Ø74
Ø154
□205
Polystyrene insulation,
PS 30 DN 70 0174.47.18
150
DN 100 0174.47.19
110
5
105
51
Gravity drainage
105
Parking deck
drainage
Ø103
ceiling TG 66‑15 15 G
[mm] [kg] membrane
uninsulated 150 x 290 5.1 1311.10.60 1311.10.62 1311.10.67
insulated, heated 150 x 290 5.3 1311.10.90 1311.10.92 1311.10.97
stainless steel
foam glass 230 x 360 6.0 1311.18.60 1311.18.62 1311.18.67
foam glass, heated 230 x 360 3.2 1311.18.90 1311.18.92 1311.18.97
Facade drainage
Øa
Core borehole dimensions
b
Øc
52
Gravity drainage
Contents
Scale drawing Product description Model Article No.
Ø127
Fire protection insert
fits Spin flat roof drains DN
127
100 with 90° outlet socket
inclination. 7034.20.15
Gravity drainage
Warning! The outflow capacity
is reduced when this insert is
installed (refer to page 15).
Heat shield
stainless steel, for Spin flat
roof drain DN 100,
440
Ø1
14 with impact dowels M8 x 16 7034.20.17
Syphonic drainage
□470
Insulating body
foam glass, for Spin vertical
20
Ø1
341
345
Parking deck
Ø370
drainage
□205
Insulating sleeve
foam glass, for Spin vertical
drain bodies and lower parts
for length adaptation 0174.77.94
Ø105
drainage
Facade drainage
Pipe systems
53
Gravity drainage
Installation recommendation
Gravity drainage with Attika flat roof gully and duct made of stainless steel
Contents
Sealing membrane
Insulation
Sealing membrane
Gravity drainage
3 (vapour trap)
4
2
Syphonic drainage
Ceiling
(thickness according to the
structural engineering
specifications)
DN 70 – DN 100
Facade drainage
110
DN 70: 165
DN 100: 190
90
Pipe systems
Extension heights in mm
54
Gravity drainage
DN 70–DN 100
Contents
Drain body DN 70 or DN 100
Stainless steel, material 1.4301
With compression sealing flange
Direct connection to ACO GM-X pipe
system, connection to other types of
pipe requires transition fittings
Gravity drainage
35
70 5
10
Ø233 Ø232.5
6
4
70
45°
M8x25 35°
1,5°
1
Syphonic drainage
90
110
77
2°
56
800
510
Ø103
Nominal width DN 70 DN 100
335
250
6
35
70
Ø233
105
Ø232.5 6
Parking deck
4
M8x25
drainage
1,5°
70
105
(77)
90
56
110
2°
800
510
drainage
Outflow capacities
55
Gravity drainage
Additional components
4,5
made of stainless steel
h
Gravity drainage
Ø170
Ø110
99
234 Plastic gravel basket
fits all Spin flat roof drains 0174.87.36
made of stainless steel
Syphonic drainage
254
30
3 Thickness: 4 mm NBR/SBR 0174.42.97
Parking deck
drainage
Impoundment ring
Ø323 for emergency drains,
35
height: 35 mm
Balcony and terrace
drainage
431
178
Facade drainage
Bitumen-
DN 100: 500x500
Anschlussmanschette
DN 70: 450x450
Attika duct
DN 100 DN 70 0174.48.66
DN
68
56
Gravity drainage
Installation recommendation
Contents
Gravity drainage
1
Gravel layer
Sealing membrane
Syphonic drainage
Thermal insulation
Sealing membrane
(vapour trap)
Trapezoidal sheet
metal roof
Parking deck
drainage
2
drainage
DN 100 DN 150
Facade drainage
870
880
40-250
40-250
Pipe systems
100-300
100-300
Extension heights in mm
57
Gravity drainage
DN 100 or DN 150
Contents
Ø 280
d3
d4
750
Parking deck
H1
drainage
H2
d2
Balcony and terrace
L
drainage
d1
Nominal Number of
Model d1 d2 d3 d4 L z H1 H2 Weight Article No.
Facade drainage
width flanges
1 with rain cap 6 0174.43.01
DN 100 2 with rain cap 8x 8 0174.43.05
102 133 332 233 80 870 830
or DN 70* 1 M8 5 0174.43.09
2 7 0174.43.13
1 with rain cap 8 0174.43.03
DN 150 2 with rain cap 10 x 11 0174.43.07
159 192 410 300 90 880 840
or DN 100** 1 M8 7 0174.43.11
2 10 0174.43.15
Pipe systems
*The following components must be ordered for a DN 70 duct: **The following components must be ordered for a DN 125 duct:
Duct DN 100 according to the previous table plus GM-X adapter piece Duct DN 150 according to the previous table plus GM-X adapter piece
art. no. 0174.12.73 plus GM-X sealing ring art. no. 0174.14.71 art. no. 0174.12.76 plus GM-X sealing ring art. no. 0174.14.74
58
Gravity drainage
59
Pipe systems Facade drainage Syphonic drainage Gravity drainage Contents
drainage drainage