Professional Documents
Culture Documents
B044B045B046 - 009
B044B045B046 - 009
GENERAL:
The following parts updates are being issued for all B044/B045/B046 Parts Catalogs.
PARTS
UPDATE 1: Fusing Lamp The following changes have been made to minimize
fusing offset images:
1. Fusing lamp filament changed for an even more stable fusing
temperature.
2. Cap added to the front side of the hot roller (see illustration below).
3. Front stopper on hot roller changed to accommodate hot roller cap
(see illustration below).
The following parts updates are being issued for all B044/B045/B046
Parts Catalogs. Please update your parts catalog with the following
information.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
AX440137 AX440187 Fusing Lamp - 120V 650W 1-1 3/S 35 41
AX440138 AX440188 Fusing Lamp 230V 650W 1-1 3/S 35 41
- B0444112 Hot roller Cap 0-1 3/S 35 49 *
- B0444156 Front Hot Roller Stopper 0-1 3/S 35 50 *
B0444150 - Hot Roller Stopper 21 3/S 35 37
* DENOTES NEW ITEM NUMBER
UNITS AFFECTED:
All B044/B045/B046 copiers manufactured after the serial numbers listed below will have the new style
Fusing Lamp installed during production.
UPDATE 2: Lens Cover The Lens Cover was omitted from the B044/B045/B046
Parts Catalog. Please update your parts catalog with the following
information.
26
REFERENCE
NEW PART NUMBER DESCRIPTION QTY PAGE ITEM
B0441777 Lens Cover 1 27 26 *
* DENOTES NEW ITEM NUMBER
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and NEW parts CAN NOT be used in OLD machines.
0 NEW machines. 2 OLD parts can be used in OLD and NEW machines.
NEW parts can be used in OLD and NEW machines. OLD parts CAN NOT be used in NEW machines.
1 OLD parts CAN NOT be used in NEW machines. 3 NEW parts CAN NOT be used in OLD machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S previously modified, use the new part numbers individually.
Page 2 of 2