Professional Documents
Culture Documents
Kajiwara
The "Jaguar- MkII SALOON" is a compact saloon from Jaguar, which made its debut in 1959 at an
automobile show in London.The model featured an original styling, its four-door body designed with a
sleek, streamlined finish. It also made use of sash-type doors and windows, considered innovative at the
time. The Jaguar-MkII SALOON came in 2.4, 3.2, and 3.8 liter types, each featuring a straight-six DOHC View of complete model (Back view)
engine.As for the vehicle's suspension, the front sported a double wishbone suspension while the rear
had a rigid axel suspension.Furthermore, disc brakes were installed on all four wheels. Equipped with a Parts list (Assembly Instructions) : Twelve A4 sheets (No.1 ~ No.12)
high-powered engine, excellent suspension, and powerful brakes, the Jaguar-MkII has also participated
in touring car championships and rallies. While its great performance led it to be known as the best No. of Parts: 154
sporty saloon at the time, it was also the core model produced by Jaguar up until 1967.
This Papercraft Jaguar-MkII SALOON is about one thirteenth the size of the real car. *Bulid the model by carefully reading the Assembly Instructions,
*This model was designed for Papercraft and may differ from the original in some respects. in the parts sheet page order.
Assembly Instructions
Valley fold
3-C
2-B
3-G
3-B 3-F
2-A
5-D
Valley fold
Mountain fold
3-A
Mountain fold
Mountain fold
Valley fold
2-D
5-C
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
3-E 6-Y
6-L
3-D
4-B
4-D
4-C
3-H 4-E
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
6-N/D
9-B
8-A/B
9-A
5-B
8-A
5-A
6-M
7-D/8-D 7-A
Use 2 pieces per a tire.
Attach in line with the
dotted lines on 7-D/8-D.
Apply glue to the underside
7-A/7-B
8-A/8-B
7-A/B 7-B
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
Where to attach the parts. When making the 14-B glue tabs:
First, fold and make creases along all the mountain fold lines.
Then, cut it out.
11-B
11-F 11-A/C
11-I 11-A/C
11-A/C 11-M/N
11-B
12-E/F
Be careful when
attaching since the
11-G/H "glue tabs" are small.
11-A
12-E/F
11-C
11-A/C
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
Cross-sectional view
12-F
when attaching the parts.
Attach 12-E/F to 11-B.
12-O
10-B
10-A
12-H
12-I
Firmly fold and crease the 10-A/B "glue tab" at the line 12-B
where the colors change on the 9-A/B side. Then,
attach it by carefully aligning it with the other part. 12-A
Do not attach
9-A/B and 6-Y.
When attaching the body,
start from the door (see circled area).
13-A
13-P
13-A
Cross-sectional view
13-P
10-A/B
9-A/B
Insert 13-P from the underside of
13-A, and attach it to the side of 13-A.
12-B
13-G/H
13-L
13-E/F
13-F
12-M
13-M
13-K
13-E
13-O
12-N
12-Q
12-D
12-R
12-C
Attach 10-C/D
before attaching
the rear bumper.
Attaching 10-A/B.
Attach it along the line.
12-G
12-L When attaching the rear bumper,
12-J
make sure that it is parallel
to the ground.
12-K
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
14-A
Attach the "glue tabs" of
14-B to the underside.
Make a mountain fold on
13-B/C and attach it together.
Before attaching the"glue tabs" Next, make a valley fold
of 14-B to 14-A, attach them to along the fold line as shown.
9-A/B and 12-A/B.
Attach 14-A in the following order:
Attach the front part first, then 14-B
the two sides, starting from the front
and working back. Finally,
attach the rear part securely. 13-B/C
6-P
6-Q
11-K/L
12-P
13-R 12-P
13-J
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
6- J
Do not attach these parts Attach the muffler to the side of 2-A. 6- K
but insert them only.
6-I
6-C
6- A
6-E
Canon is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara