Professional Documents
Culture Documents
Scenario WCDMA to LTE Cell Set LTE cell priority higher than
Reselection wcdma priority as set in the table above
measurement detection on LTE cell higher
priority is done every 60s
FAJ 121 0493, WCDMA Session Continuity, Coverage-Triggered should be licensed and activated
RSRP(LTE)<-118-2=-120dBm
time to trigger A2 :timeToTriggerA2Prim =640ms then the UE stats sending Meas Rep
In case the UE detects RSRP(LTE) - hysteresisA2Prim>a2ThresholdRSRPPrimary be
Then RSRP(LTE) >-118+2=-116dBm then the UE Leaves Event A2 and stays connect
Parameters Name Scenario Value Unit Resolution
a2ThresholdRsrpPrim -118 dBm 1
triggerQuantityA2Prim 0 (RSRP)
hysteresisA2Prim 20 0.1 dB 0,40,64,8
5
0,100,128
reportAmountA2Prim 0 ,160,256,
320,480,5
12,640,10
24,1280,2
timeToTriggerA2Prim 640 ms 560,5120
RSRP-
qRxLevMin<threshServingLow
and
RSCP(3G) -qRxLevMin
>threshXlow
timer=tReselectionUtra
=2seconds
Parameters Name Scenario Value Unit Resolution
cellReselectionPriority 7
systemInformationBlock3_sNonIntraSearch 16 dB 2
threshServingLow 6 dB
systemInformationBlock6_tReselectionUtra 2 s
systemInformationBlock1_qRxLevMIn -128 dBm 2
threshXLow 3
qRxLevMin -105 dBm 2
cellReselectionPriority 6
RSRP<-128+16<-112
RSCP(3G)>-105+3>-102dBm
Resolution
MO Class Name Paramter Name Value
UtranFreqRelation mobilityActionCsfb RELEASE_WITH_REDIRECT
UtranFreqRelation csFallbackPrio 6
UtranFreqRelation csFallbackPrioEC 6