o Reference standard..IEC 60034-1 o Rated output...100 kW o Rated stator voltage 220 / 380 V o Stator connection.............................. / Y o Stator current ..................... 355 / 205 A o Rotor voltage .......................................................................................... 360 V o Rotor connection......................................................................................Y o Rotor current............................................................................................166 A o Number of poles8 o Rated speed......................... ..735 rpm o Rated frequency...................................................................................... 50 Hz o Efficiency at 100% load....92,7 % o Power factor at 100% load..0,80 o Rated duty.............................................................................S3 - 6 starts/hour , OD= 40% o Break-down torque....3,4 x Mn o GD2 motor . 24 kgfm2 o Insulation class/temp.rise..F o Direction of rotation.Both o Protection degreeIP 55 o MountingHORIZONTALLY-foot mounted o Cooling methodIC 411 o Ambient temperature from -33C to + 40C o Altitudemax. 1000 m o Bearing typeNU 319 P6 drive end 6319 P6 non drive end o Lubrication regreasable bearings with UM 185 Li 3, Shell Alvania R3, or similar o Re-lubricated interval................8700 hours DE and NDE o Grease quantity ..45 g/bearing DE and NDE o Weight..1230 kg o Outline drawing Page 2/2 o Vibration level : A (acc.IEC 60034-14 ) o Noise level ..acc.IEC 60034-9 o Cable entries2 x M63x1.5 o Climate execution N