Professional Documents
Culture Documents
Instalacija Tower Build 1350 I ArmCAD-A Build 1763 Na Win 7 x64 Ultimate
Instalacija Tower Build 1350 I ArmCAD-A Build 1763 Na Win 7 x64 Ultimate
1B. First make sure you have turned off the UAC using the registry file provided
called "UAC_Off_after_reboot"
2. Install "dseo13b.exe" from the Driver Signature Enforcement Overrider folder and
enable test mode.
6. Open the MultiKey64 folder and from there install the "install" win command
script file.
9. In diru where it is installed Tower6 TOWERS.ULN find file then copy and paste
into any other folder where you will change his name from the TOWERS.ULN TOWER.ULN.
This file copy with a new name again, back to C: / programfiles/radimpex/tower6 /
and copy over the existing one when you are asked to do so.
10.Run the file "T6_patch.exe" using the attached code will then be formed
Language.dll. This file is necessary to copy
Tower in the installation directory and overwrite the existing one. This procedure
eliminates the # in the menus.
1st Start the installation and install using the serial number ArmCAD: J1UHF-RM9NL-
4E566-9U2QD
As for the language switch ArmCAD-and this is possible in two ways and both are
attached to the link below to a zip file called "Change Language ArmCAD"