Professional Documents
Culture Documents
1111 Huawei GGSN Commands PDF
1111 Huawei GGSN Commands PDF
)
ac AC
access-control-degree Configure the access control degree
access-list Access list
access-user Online user
accounting-scheme Accounting scheme
acl Acl status and configuration information
acl-default Display the default acl
acl-node Display all acl nodes or the acl node by
specifying the name
acr-dcr Display adaptive or differential clock
recovery
action-list Display the action list
action-property Display the action-property
actual Current actual
admin-vsi Specify administrator VSI configuration
information
administrate Administrate status(enable/disable)
alarm Display alarm
alarm-threshold alarm threshold
allow-type allowed board type
ancp Ancp module
anti-attack Specify anti-attack configurations
anti-spoofing-alarm Display the configure of the anti-spoofing
alarm
anti-spoofing-threshold Display the configured anti-spoofing
threshold of the number of packets
ap Display AP information
ap-auth-mode Display AP authentication mode
ap-performance-statistic Display AP performance statistic
information
ap-profile Display AP profile information
ap-region Display AP region information
ap-run-info Display AP run information
ap-type Display AP type information
ap-update AP update
ap-whitelist AP white list
apn The configuration of APN instance
apn-abnormal-control Configure the switch of the APN abnormal
control function
apn-list Display APN list
apn-pdp-statistics Show apn pdp-context statistics !
apn-priority-control Configure the switch of the APN Priority
Control function
apn-relate The alias APNs or the aliases of the
specified APN
apn-userinfo Information of the user of a specified APN
application-apperceive Protection on applicatoin apperceive
aps Show APS information
arp Display ARP entries
arp-limit Display the number of limitation
arp-miss ARP-miss message
arp-pri-mapping Configure the mapping value of ARP between
Gn interface and Gx interface
arp-qci-mapping mapping relationship between QCI and ARP
arp-safeguard Display ARP entry
asn-function asn function
associate-time Display the default delay for charging of
signaling packets associated services
atm ATM status and configuration information
atm-trunk Display information of atm-trunk
attach-board GE0/0/0 attach board
attack-source-trace Attack source trace
authentication-scheme Authentication scheme
authorization-scheme Display AAA authorization scheme
auto-upgrade display auto-upgrade info
backup Show device backup state
bandwidth The bandwidth based on APN or slot number
bandwidth-arp Configure bandwidth threshold
bas-interface Access interface information
bearer-binding Display bearer binding
bfd Specify BFD(Bidirectional Forwarding
Detection) configuration information
bgp BGP information
binding Display binding relation of profile
black-address-list Display the black list of the static IP
addresses
bmsc-state Display the state of specified BMSC
board-current Display current
board-power Display power
board-type board type
bootmode-current current-bootmode
bootmode-next next-bootmode
bpdu-tunnel bpdu-tunnel
btv Broadcast TV
buffer buffer
bulk-stat Bulk statistics
bwm-controller Display the bwm-controller
bwm-service Configure the bwm-service
cache-acct-stop-msg Display whether the UGW caches the
accounting stop request message
calibrate Global calibrate
car Display the committed access rate
category-group Display all category-group or one piece of
category-group by the name
category-property Display all category-property or one piece
of category-property by the name
cbb-association-method Display the charging type
cbb-id Display the cbb id
cdr-audit Display the configuration of the audit
function of CDRs
cdr-audit-ftp Display the configuration of the FTP server
node-alive-timeout (seconds)
nps-mc Display statistic information of MC
nqa NQA test
nqa-agent Display NQA agent status
nqa-event Display NQA event status
nqa-ftp-record Save NQA record to FTP server by FTP
nqa-server Display NQA server status, NotInService or
Active
ntdp Network topology discovery protocol
ntp-service NTP(Network Time Protocol) service
oam Operations, Administration, Maintenance
oam-mac MAC address of OAM type
observe-filter mirror filter rule
observe-server remote observe server
ocs-group Display the configuration of OCS-Group
ocs-info Display the configuration of the server
ocs-status Display the state of spcified OCS
offline-charge-binding Bind the offline charge template
offline-charge-template Display the configuration of a specified
offline-charge-template
offline-service-template Display Offline-service-template
optical-module optical-module
ospf Open Shortest Path First (OSPF)
ospfv3 OSPF version 3 for IPv6
p-cscf-group Display the p-cscf group information
packet-compatible Compatible packer
paf PAF(Product Adaptive File)
patch Patch
path-configuration The attributes of the configured paths
path-information Information of the specified path
the SGSN
pmip Configure pmip para
pmip-heartbeat Configure heartbeat para
pmip-lma Configure LMA para
pmip-mag Configure MAG para
pmip-path Pmip path configuration infomation
policy-based-route Policy based routing status and
configuration information
port Switch port
port-mirroring Specify mirror port
port-observing Specify observing port
class
qos-car Configure the uplink and downlink car
functions of the UGW
qos-car-burstsize Display qos car burstsize
qos-convert-rule Configure the rule for converting the QoS
version
qos-function Enable or disable the user QoS function of
the UGW
qos-map Display qos map information
qos-profile Configure quality of service profile
qos-qci2trafficclass Configure sae qos map information
redirection
referer-correlation Display the master switch of referer
correlation charging
remote-backup-profile Show profiles
remote-backup-service Remote backup service
result-code-control Display result code control info
rip RIP status and configuration information
ripng RIPng status and configuration information
rm Routing Module
rmon RMON information
rmon2 Specify RMON2 Config
(charge1 or charge2)
sftp-client Show SFTP client configuration
sgsn-sgw-plmn Configure the table of the mapping between
the SGSN/SGW IP, the PLMN ID, and the RAT
type
sgw-cg Configure the CG selection mode of SGW
shaping Display the class, velocity and queue depth
of traffic shaping
shaping-buffer-usage display the shaping buffer usage
signalvalue display dscp value
signature-database Display the version of rule database
single-gateway Display whether to generate only PGW-CDR
for S+P role
slave Display standby status
slot Specify slot number
slot-warning-threshold Configure slot online user warning
threshold
snmp-agent Specify SNMP(Simple Network Management
Protocol) configuration information
configuration information
user-max-gbr Configure the max user max gbr(Mbps), the
default is 0
user-number The number of users in the specified status
user-priority-arp Set arp of roam or visit user
user-profile Display information about all user profiles
or certain user profile by givening the
name
user-profile-group Display information about all user profiles
or certain user profile by givening the
name
user-queue Display user-queue configuration
information
user-vlan Specify User-VLAN map to the Multicast-VLAN
users The status and configuration of a user
interface
vap VAP keyword
vas Mqe value-added service
version System hardware and software version
information
virtual-access Virtual-access interface status and
configuration information
virtual-apn-rule The matching rule of a specified virtual
APN
virtual-ethernet Virtual ethernet interface
vlan Vlan status and configuration information
vlan-group Config vlan-group information
vlan-mapping VLAN mapping
vlanpvc-to-username Configure vlan and pvc model in username
vll Display VLL