Professional Documents
Culture Documents
q 2 Lines of 40 Characters 5mm High The module includes the Vacuum Fluorescent Display glass,
q High Speed Parallel/Serial Interface driver and micro-controller ICs with refresh RAM, character
q Operating Temp -10° C to +65° C generator and interface logic. The high speed 8 bit parallel
q Single 5V Supply interface is 5V CMOS compatible suitable for connection to a
q High Brightness Blue Green Display host CPU bus. The asynchronous serial interface accepts baud
q ASCII, Katakana & Extended Character Font rates up to 19,200 with or without parity. Two character font
q 2 User Definable Character RAM tables can be hardware or software selected. User defined
characters and many control commands are available.
16.5
16.0 43.0
21.5
13.5
20.7
188.55
230.0 5.0
240.0
11.9
1.6 13.0
PWR (AMP171825-3) IDC (16 WAY)
Dimensions in mm & subject to tolerances. Mounting holes 3.5mm dia.
ELECTRICAL SPECIFICATION CHARACTER FONTS International Font Additional Katakana Font
Parameter Symbol Value Condition
Power Supply Voltage V CC 5.0VDC +/- 5% GND=0V
Power Supply Current ICC 700mADC typ. Vcc=5V
Logic High Input V IH 2.0VDC min. V CC=5V
Logic Low Input V IL 0.8VDC max. V CC=5V
Logic High Output V OH 2.4VDC min. IOH = -2.0mA
Logic Low Output V OL 0.5VDC max. IOL =2.0mA
The power on rise time should be less than 50ms.The inrush current at power on can be 2 x ICC .