Mubeen Raza BSEE14031 Task 1: Design a composite high-pass filter by the image parameter method with the following specifications: R0 = 75 , fc = 50 MHz, and f = 48 MHz. Use CAD to plot the insertion loss versus frequency. Task2: Design a stepped-impedance low-pass filter having a cutoff frequency of 3 GHz and a fifth-order 0.5 dB equal-ripple response. Assume R0 = 50 ,Z = 15 , and Zh = 120 . (a) Find the required electrical lengths of the five sections, and use CAD to plot the insertion loss from 0 to 6 GHz. (b) Lay out the microstrip implementation of the filter on an FR4 substrate having _r = 4.2 d = 0.079 cm, and tan = 0.02, and with copper conductors 0.5 mil thick. Use CAD to plot Conclusion: In Our project we perform 2 task and observer the above results: