Professional Documents
Culture Documents
Clamping Clamping
Bore
Series Standard Features Stroke Force
[in]mm
[in]mm [lbf.]N
[0.79] [18]
89R Series
20 80
[0.39]
10
[1.26] [55]
• Field changeable swing direction 32 245
• Multiple mounting accessories
• Sensor ready [1.57] [0.39]10 [85]
• Locking taper arm connection 40 [0.98]25 380
for 360° adjustability
[1.97] [138]
• Clamp arm sold separately
50 614
[0.98]
25
[2.48] [218]
63 970
[0.79] [18]
89B Series
20 80
8100/8300 Series • Block style body for side mounting [0.75] [0.38] [18]
• Imperial design featuring NPT ports 19,1 9,7 80
• Sensor ready
• Locking taper arm connection
for 360° adjustability [1.50] [0.50] [67]
• Clamp arm and spindle included 38,1 12,7 298
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.2
Clamping Clamping
Bore
Series Standard Features Stroke Force
[in]mm
[in]mm [lbf.]N
[0.79] [18]
89E Series 20 80
CLAMPED
POSITION
Application Note:
Swing Cylinder Rotation: The frame of reference
90°±5° 90°±5°
for specifying the rotation direction (left or right)
is the clamp arm viewed from above during the
clamping stroke. A RIGHT HAND unit rotates
CLOCKWISE and then clamps down; a LEFT
HAND unit rotates COUNTER-CLOCKWISE UNCLAMPED UNCLAMPED
and then clamps down. POSITION
RIGHT HAND
POSITION
LEFT HAND
ROTATION ROTATION
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.3 Pneumatic Swing Clamps
Stroke Vertical
Total Clamping Air
Swing During Clamping Bore Size Weight Replacement
Model Stroke Force @ Consumption‡
Direction Rotation Stroke [in.]mm [lb.]kg Seal Kit
[in]mm [lbf.]N† dm3[in3]
[in]mm [in]mm
9522-2L LH [0.50] [0.50] [34] [0.86] [0.004] [0.68]
952292
9522-2R RH 13 13 150 22 0,10 0,31
9530-2L
LH
9530-2GL [76] [1.26] [0.010] [1.25]
953092
9530-2R 340 32 0,29 0,57
RH
9530-2GR
9540-2L
LH --
9540-2GL [0.79] [0.79] [123] [1.57] [0.016] [1.98]
954092
9540-2R 20 20 550 40 0,46 0,90
RH
9540-2GR
9550-2L
LH
9550-2GL [196] [1.97] [0.026] [3.33]
955092
9550-2R 870 50 0,74 1,51
RH
9550-2GR
† with standard clamping arm at 5bar [72psi]. ‡ Per double stroke at 5bar [72psi]
Operating Pressure Range: 3bar [40psig] to 8bar [120psig]
Maximum Operating Temperature: 60°C [140°F]
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.4
90° ±5°
REPEATABILITY
±1° "C" SHCS
B A
90°
Clamped Unclamped (SQ) (SQ)
Unclamped
D E
Clamped
K
CLAMP STROKE
ØF
J
H G
N
(PORTS)
M
mm [INCH] mm [INCH]
Model A B C D E F G H J K L M N
[1.42] [1.00] M5 [0.82] [3.77] [4.79] [5.22] [0.50] [0.43] [2.90]
9522-2 36 25,4 (#10)
-- --
21 95,8 121,8 132,7 13 11 73,8
M5
9530-2 [1.81] [1.34] [0.16] [0.96] [4.48] [6.09] [6.54] [0.61] [3.39] 1/8NPT
9530-2G 46 34 4 24,4 113,7 154,8 166 15,5 86,2 G-1/8
M6 [0.55]
9540-2 (1/4”) 14
[2.05] [1.57] [0.20] [1.13] [4.63] [6.29] [6.73] [0.79] [0.65] [3.43] 1/8NPT
9540-2G 52 40 5 28,7 117,6 159,7 170,9 20 16,5 87,1 G-1/8
9550-2 [2.52] [1.97] M8 [0.71] [0.28] [1.32] [5.58] [7.20] [7.85] [0.73] [4.22] 1/8NPT
9550-2G 64 50 (5/16”) 18 7 33,5 141,8 182,9 199,3 18,5 107,3 G-1/8
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.5 Pneumatic Swing Clamps
300 [67]
100 [22]
200 [45]
50 [11]
100 [22]
0 [0] 0 [0]
[40] [50] [60] [70] [80] [90] [100] [110] [120] [40] [50] [60] [70] [80] [90] [100] [110] [120]
2.8 3.4 4.1 4.8 5.5 6.2 6.9 7.6 8.3 2.8 3.4 4.1 4.8 5.5 6.2 6.9 7.6 8.3
800 [180]
Straight Pull Straight Pull
1400 [315]
954050 Arm 955050 Arm
700 [157] 954053 Arm 955053 Arm
Clamping Force N [lbf]
600 [135]
1000 [225]
500 [112]
800 [180]
400 [90]
600 [135]
300 [67]
400 [90]
200 [45]
0 [0] 0 [0]
[40] [50] [60] [70] [80] [90] [100] [110] [120] [40] [50] [60] [70] [80] [90] [100] [110] [120]
2.8 3.4 4.1 4.8 5.5 6.2 6.9 7.6 8.3 2.8 3.4 4.1 4.8 5.5 6.2 6.9 7.6 8.3
Weight (gr)
200
please consult these charts for the allowable 400
150
weight and length. 300
100
200
50
Example: 9522-2 100
0 0
At a weight of 80 gr, the maximum length 40 80 120 160 200 40 60 80 100 120 140 160 180 200 220
of the arm is approximately 120mm.
Length - L1 (mm) Length - L1 (mm)
L1
9540-2 Clamp Arm Weight 9550-2 Clamp Arm Weight
800 1400
700 1200
600
Weight (gr)
1000
Weight (gr)
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.6
mm [INCH] mm [INCH]
ØT x (6)
W SHCS x (4)
Q
ØV TAPPED
HOLE x (4)
Q
P X
R
S
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.7 Pneumatic Swing Clamps
A
Features: B E
G
• L ightweight aluminum
construction
•D esigned for use with
9500-2 series clamps F
D
C1
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.8
89R
Stroke Vertical
Total Clamping Bore Air
Swing During Clamp Weight Replacement
Model Stroke Force† Size Consumption‡
Direction* Rotation Stroke [lb.]kg Seal Kit
[in]mm [lbf]N [in]mm [ft3]dm3
[in]mm [in]mm
[0.83] [0.43] [18] [0.79] [0.002] [0.66]
89R20-010-2 LH, RH
21 11 80 20 0,07 0,30
89R20-00
* Swing direction is field adjustable. † with standard clamping arm 5bar[72psi]. ‡ per double stroke at 5bar[72psi]
Note:
Switches are optional. To order with (2) 8EA-109-1 switches, add A to the end of the model. Ex. 89R32-010-2A
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.9 Pneumatic Swing Clamps
I1
I2
I3
I4
mm [INCH] mm [INCH]
Ø M1
H6
THIRD ANGLE FIRST ANGLE
I5 I6 PROJECTION PROJECTION
Ø D1
Ø D2
H2
H1
Ø M3
H7
H3 H4
Ø D3
H7 H5
M2
ØD1 ØD2
Model ØD3 H1 H2 H3 H4 H5 H6 H7 L1 L2
H9 F7
[4.15]
[0.71] [0.39] [0.18] [0.78] [0.47] [2.60] [0.52] [0.59] [0.55] [1.56] [1.38]
89R20-010-2 18 10 4,6 19,8 11,9
105,5
66 13,2 15 14 39,5 35
[0.87] [0.47] [0.93] [4.92] [3.27] [0.69] [0.63] [2.36] [2.13]
89R32-010-2 22 12 23,7 125 83 17,5 16 60 54
[0.22] [5.51] [3.74] [0.67]
89R40-010-2 5,5 140 95
[0.83]
17
[1.18] [0.63] [0.98] [0.43] [2.60] [2.36]
21
30 16 25 11 [6.69] [4.92] 66 60
89R40-025-2 170 125 [0.98]
[1.57] [0.71] [0.29] [1.24] [7.70] [5.39] [1.05] 25 [3.09] [2.85]
89R50-025-2 40 18 7,4 31,4 195,5 137 26,7 78,5 72,5
[0.98]
[1.77] [0.78] [0.37] [1.30] [0.59] [8.33] [6.08] [1.04] 25 [3.74] [3.46]
89R63-025-2 45 20 9,3 33 15 211,5 154,5 26,5 95 88
Model L3 L4 L5 L6 M1 M2 M3
[0.87] [0.63] [0.87] [1.26]
89R20-010-2 22 16 22 32
M5 M6 M5
[1.42] [0.94] [1.26] [1.77]
89R32-010-2 36 24 32 45
M6
89R40-010-2 M8
[1.57] [1.07] [1.57] [2.15]
M8 G-1/8
40 27,3 40 54,5
89R40-025-2
[1.97] [1.28] [1.97] [2.56]
89R50-025-2 50 32,5 50 65
M10
M10
[2.44] [1.57] [2.44] [3.15]
89R63-025-2 62 40 62 80
M12 G-1/4
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.10
2000 [450]
800 [180]
600 [135]
400 [90]
200 [45]
0 [0]
[45] [58] [73] [87] [102] [116] [131] [145]
3 4 5 6 7 8 9 10
89R20
120
allowable weight and length.
80
Example: 89R32 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140 160 180 200 220 240
Length - L1 (mm)
L1
89R40
320
260
200
All data refers to an operating pressure of 5 bar (72psi) 140
and an opening and closing time of 1 second. 80
20
50 70 90 110 130 150 170 190 210 230 250 270 290
Length - L1 (mm)
600
Weight (gr)
500
400
300
200
100
60 80 100 120 140 160 180 200 220 240 260 280 300 320
Length - L1 (mm)
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.11 Pneumatic Swing Clamps
C1
Features:
•F or attaching custom
made clamp arms
• 360° rotatable arm
• Aluminum construction
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 89R40_010_2
10.12
ØH
B C
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.13 Pneumatic Swing Clamps
Features: B
• Can be mounted on bottom side or top side D
• For use with 89R Pneumatic Swing Clamps E
A C
ØG
F H
ØJ
C D Weight
Part Used with
A B [±0.008] [±0.008] E F G H J
Number Model/series [lbs]kg
±0,2 ±0,2
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.14
Series 89B
Stroke Vertical
Total
During Clamp Clamping Bore Air
Swing Stroke Weight Replacement
Model Rotation Stroke Force Size Consumption‡
Direction [in]mm [lb.]kg Seal Kit
[in]mm [in]mm [lbf.]N† mm[in] [ft3]dm3
S
S1 S2
89B20-010-1R RH [0.79] [0.39] [18] [0.79] [0.002] [1.70]
8940-3-00
89B20-010-1L LH 20 10 80 20 0,06 0,77
Operating Pressure Range: 3bar [30psig] to 10bar [145psig] (89B20 8bar [116psig] max.)
Maximum Operating Temperature: 80°C[176°F]
Note:
Switches are optional. To order clamp with (2) 8EA-109-1 switches, add A to the end of the model.
EX. 89B30-010-1RA. See page 11.1 for additional switch options.
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.15 Pneumatic Swing Clamps
89B40_010_1L
L1
L3
Ø M1
H6
L5 L6 mm [INCH] mm [INCH]
L2 Ø D1
S1
L4
Ø D4 S
H2 S2 Ø D2
Ø D3
Ø M3
H1
H8
Ø D3
H3 H4
H9
H7
H5
M2
Model L3 L4 L5 L6 M1 M2 M3
[1.18] [0.75] [2.36] [2.95] Mounting Options
89B20 30 19 60 75
M5 M8 M5
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.16
2400 [540]
1600 [360]
89B50
89B63
1400 [215]
1200 [270]
1000 [225]
800 [180]
600 [135]
400 [90]
200 [45]
0 [0]
[45] [58] [73] [87] [102] [116] [131] [145]
3 4 5 6 7 8 9 10
89B20
120
allowable weight and length.
80
Example: 89B30 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140 160 180 200 220 240
Length - L1 (mm)
L1
89B40
320
260
200
All data refers to an operating pressure of 5 bar (72psi) 140
and an opening and closing time of 1 second. 80
20
50 70 90 110 130 150 170 190 210 230 250 270 290
Length - L1 (mm)
600
Weight (gr)
500
400
300
200
100
60 80 100 120 140 160 180 200 220 240 260 280 300 320
Length - L1 (mm)
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.17 Pneumatic Swing Clamps
C1
Features:
•F or attaching custom
made clamp arms
• 360° rotatable arm
• Aluminum construction
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.18
Notes
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.19 Pneumatic Swing Clamps
Sensor ready.
Supplied with clamping
arm and spindle.
To order without clamping
arm add –LA to the end of
the model. Ex. 8115-LA
Note:
To order with out clamping arm, add –LA to the end of the model number. EX. 8115-LA.
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
8315_C
Pneumatic Swing Clamps 10.20
L5
L2
L3 L1
Ø M1
Ø D1
H6
Ø D2
H2 H1
Ø D3
Ø D4
H8
Ø M3
H10
H3
H4
H11
mm [INCH] mm [INCH]
H9
H5
THIRD ANGLE FIRST ANGLE
PROJECTION PROJECTION
H7
D5
8315 [1.74] [0.50] [0.33] [0.53] [0.40] [0.97] [0.81] [4.11] [2.46] [0.65] [0.67] [0.44]
8316 44,2 12,7 8,4 13,5 10,2 24,6 20,6 104,4 62,5 16,5 17 11,2
8315 [1.00] [1.49] [2.25] [2.37] [2.00] [0.72] [1.44] [2.44] [3.00]
5/16/18 1/8 NPT
8316 25,4 37,9 57,2 60,2 50,8 18,3 36,6 62 76,2
Mounting Options
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.21 Pneumatic Swing Clamps
600 [135]
400 [90]
350 [79]
300 [67]
250 [56]
200 [45]
150 [34]
100 [22]
50 [11]
0 [0]
[29] [45] [58] [73] [87] [102] [116] [131]
2 3 4 5 6 7 8 9
160
allowable weight and length. 120
80
Example: 8315 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140
Length - L1 (mm)
L1
250
200
150
All data refers to an operating pressure of 5 bar (72psi)
100
and an opening and closing time of 1 second.
50
50 70 90 110 130 150 170 190
Length - L1 (mm)
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.22
C1
Features:
•F or attaching custom
made clamp arms
• 360° rotatable arm
• Aluminum construction
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.23 Pneumatic Swing Clamps
Series 89E
Stroke Vertical
Total
During Clamp Clamping Bore Air
Swing Stroke Weight Replacement
Model Rotation Stroke Force Size Consumption‡
Direction [in]mm [lb.]kg Seal Kit
[in]mm [in]mm [lbf.]N [in]mm
† [ft ]dm
3 3
S
S1 S2
89E20-010-1R RH [0.79] [0.39] [18] [0.79] [0.002] [0.62]
8940-3-00
89E20-010-1L LH 20 10 80 20 0,06 0,28
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.24
89E40_010_1L
Series 89E Standard Clamp Dimensions
Ø D1
Ø M1
H5
L1
S1 Ø D2
S H2
S2 H1
H4
Ø M2
mm [INCH] mm [INCH] H3
Mounting Options
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.25 Pneumatic Swing Clamps
2400 [538]
1200 [269]
1000 [224]
800 [179]
600 [134]
400 [90]
200 [45]
0 [0]
[45] [58] [73] [87] [102] [116] [131] [145]
3 4 5 6 7 8 9 10
89E20
120
allowable weight and length.
80
Example: 89E30 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140 160 180 200 220 240
Length - L1 (mm)
L1
89E40
320
260
200
All data refers to an operating pressure of 5 bar (72psi) 140
and an opening and closing time of 1 second. 80
20
50 70 90 110 130 150 170 190 210 230 250 270 290
Length - L1 (mm)
600
Weight (gr)
500
400
300
200
100
60 80 100 120 140 160 180 200 220 240 260 280 300 320
Length - L1 (mm)
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.26
C1
Features:
•F or attaching custom
made clamp arms
• 360° rotatable arm
• Aluminum construction
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.27 Pneumatic Swing Clamps
Features: H
• For use with Threaded Body Pneumatic Swing Clamps
• Variable height adjustment ØE
• For recessed mounting
B
ØF
D
C
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.28
Stroke Vertical
Total Clamping Bore Air
Swing During Clamp Weight Replacement
Model Stroke Force Size Consumption‡
Direction Rotation Stroke [lb.]kg Seal Kit
[in]mm [lbf.]N† [in]mm [ft3]dm3
[in]mm [in]mm
8015 RH [0.85] [0.47] [0.38] [18] [0.75] [0.002] [1.0]
801560
8016 LH 21,5 11,8 9,7 80 19,1 0,06 0,45
Note:
To order with out clamping arm, add –LA to the end of the model number. EX. 8115-LA.
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
8215_C
10.29 Pneumatic Swing Clamps
L4 Ø D1
M3
Ø D1
L3 L2
Ø D2
H2
H1
H4
M2
H3
mm [INCH] mm [INCH]
Model L3 L4 M M1 M2 M3
8015 [0.31] [0.62]
1-1/8-16 ¼-20 #10-32 #10-32
8016 7,9 15,7
8215
2-1/4-12
8216 [0.38] [0.75]
5/16-18 1/8 NPT 3/8-16
8415 9,6 19,1
1-3/4-12
8416
Mounting Options
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.30
600 [134]
350 [78
300 [67]
250 [56]
200 [45]
150 [34]
100 [22]
50 [11]
0 [0]
[29] [45] [58] [73] [87] [102] [116] [131]
2 3 4 5 6 7 8 9
160
allowable weight and length. 120
80
Example: 8215 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140
Length - L1 (mm)
L1
250
200
150
All data refers to an operating pressure of 5 bar (72psi)
100
and an opening and closing time of 1 second.
50
50 70 90 110 130 150 170 190
Length - L1 (mm)
200
150
100
50
0
30 50 70 90 110 130 150 170 190 210 230
Length - L1 (mm)
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.31 Pneumatic Swing Clamps
A
Series 8000, 8200, 8400 Clamping Arm
G B
E
Features:
F
• L ightweight aluminum
construction
D
• L ocking tapered connection C
for 360 deg. arm positioning
C1
Mounting Flanges H
Features: ØE
D
C
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.32
Stroke Vertical
Total
During Clamp Clamping Bore Air
Swing Stroke Weight Replacement
Model Rotation Stroke Force Size Consumption‡
Direction [in]mm [lb.]kg Seal Kit
[in]mm [in]mm [lbf.]N† [in]mm [ft3]dm3
S
S1 S2
035-125-190 RH [1.04] [0.51] [0.53] [20] [0.98] [0.005] [0.56]
905516
035-125-290 LH 26,3 12,8 13,5 89 25 0,13 0,25
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.33 Pneumatic Swing Clamps
035_240_190_011_
Series 035 Standard Clamp Dimensions 035_240_190_011_
035_140_190_011_
035_140_190_011_
Mounting Options
035-1
Threaded body
mounts through
Series 035-1 Series 035-2 a clearance hole
Ø D2
Ø D2 S1 and locked in
S1
S1 Ø D2 Ø D2 place using two
S1 optional jam nuts
M1 S M1
S M1
S
S M1
S2 H1
S2 H1 M2
S2 H1 S2 H1 035-1
M2
M2 M2 Threaded body
mounts into a
H3
H4 Ø D1 H3 threaded hole
H2
H3
H4
and is locked in
Ø D1 H3
H2 place using one
H4 H2
H4 H5 optional jam nuts
H2
H5
L
L
Ø D1
Ø D1
M
M
L1
Ø D3 L3
L1 035-2
Ø M2
Ø M2 L Ø D3 L3
Mount using four
L mounting holes in
the base flange
mm [INCH] mm [INCH]
L2
THIRD ANGLE FIRST ANGLE
L2 PROJECTION PROJECTION
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.34
500 [112]
300 [67]
250 [56]
200 [45]
150 [34]
100 [22]
50 [11]
0 [0]
[45] [58] [73] [87] [102]
3 4 5 6 7
25mm
120
allowable weight and length.
80
Example: 035-132-190 40
At a weight of 80 gr, the maximum length of the arm
0
is approximately 90mm. 20 40 60 80 100 120 140 160 180 200
Length - L1 (mm)
L1
40mm
320
260
200
All data refers to an operating pressure of 5 bar (72psi) 140
and an opening and closing time of 1 second. 80
20
50 70 90 110 130 150 170 190 210 230 250
Length - L1 (mm)
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.35 Pneumatic Swing Clamps
Features:
• For standard use
• Aluminum constuction
• Clamp on style connection
for 360 deg. arm positioning
A
G B
D
C
C1
035-13....
035-23.... [3.10] [2.00] [0.75] [0.50] [0.38] [0.75] [0.38] [0.15]
036-630-01 035-14.... 78.7 50.8 19.1 12.7 9.5 19.1
5/16-18
9.5 0.07
035-24....
035-13....
035-23.... [4.73] [3.63] [0.75] [0.50] [0.38] [0.75] [0.38] [0.21]
036-630-02 035-14.... 120.0 92.1 19.1 12.7 9.5 19.1
5/16-18
9.5 0.10
035-24....
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.36
Features:
• For use withThreaded Body Pneumatic Swing Clamps
• Variable height adjustment
• For recessed mounting
• Steel construction C B
D A
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.37 Pneumatic Swing Clamps
* Equal to approx. 6° above horizontal with standard clamping arm. † at 5bar [72psi].
‡ per double stroke at 5bar [72psi].
Application Note:
If using clamping arms other than standard, the
length must not exceed 1.5X the overall length of
the standard arm.
Left Forward Right
The inlet air flow rate should be adjusted to posi-
Levers can be positioned in one of three
tion the arm in no less than 1/2 second for standard positions in relation to the air ports.
arms and no less than 1 second in the case of an
extended arm.
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY
Pneumatic Swing Clamps 10.38
8750
ØD 1400 [315]
8740
M1 8732
L3 oL2 oL1
800 [180]
600 [135]
400 [90]
200 [45]
0 [0]
OPENING [40] [60] [80] [100] [120] [140]
ANGLE 2.8 4.1 5.5 6.9 8.3 9.7
L7
Inlet Pressure bar [PSI]
H7
H6 UNCLAMP CLAMP
M2
H9
H2
H4
L6 H5
H1
H8
L5 L8
mm [INCH] mm [INCH]
H3
L4
THIRD ANGLE FIRST ANGLE
PROJECTION PROJECTION
ØM
Opening H4
Model ØD ØD1 H1 H2 H3 H5 H6 H7 H8 H9
Angle (min/max)
[0.22] [0.35] [5.67] [1.97] [2.42] [0.59-0.98] [0.67] [0.39] [0.47] [0.59]
8725 80°
5,5 9 144 50 61,5 15-25 17 10 12 15
8732/ [6.65] [2.25] [2.83] [0.63-1.18] [0.79] [0.43]
81°
8732G [0.27] [0.43] 169 57 72 16-30 [0.98] 20 11 [0.51]
8740/ 6,8 11 [6.93] [2.40] [2.85] [0.75-1.14] 25 [0.98] [0.55] [0.41] 13
82°
8740G 176 61 72.5 19-29 25 14 10,5
8750/ [0.33] [0.55] [7.87] [2.60] [3.11] [0.86-1.30] [1.18] [0.59] [0.43]
75°
8750G 8,5 14 200 66 79 22-33 30 15 11
Model L1 L2 L3 L4 L5 L6 L7 L8 ØM M1 M2
[1.97] [1.46] [0.63] [1.89] [1.61] [0.63] [0.55]
8725 50 37 16 48 41 16 14
M40 x 1.50 M6 x 1.0 M5 x 0.8
[0.91]
8732 [2.36] [1.77] [0.71] [2.36] [2.05] [0.87] [0.71] 23 [1/8NPT]
M50 x 1.50
8732G 60 45 18 60 52 22 18 G-1/8
M8 x 1.25
8740 [2.65] [1.97] [0.79] [2.60] [2.20] [0.93] [0.79] [1.02] [1/8NPT]
M55 x 1.50
8740G 65 50 20 66 56 23,5 20 26 G-1/8
8750 [2.95] [2.28] [0.87] [3.05] [2.50] [1.02] [1.10] [1.26] [1/8NPT]
M65 x 1.50 M12 x 1.75
8750G 75 57 22 77,5 63,5 26 28 32 G-1/8
CLAMPING TECHNOLOGY Dimensions and technical information are subject to change without notice destaco.com
10.39 Pneumatic Swing Clamps
Features:
• For use with 8700 Series Pneumatic Lever Clamps
• Variable height adjustment Mounting from
• For recessed mounting above using
4 socket cap screws
through the flange.
Mounting by
screwingbody into
a tapped hole and
locking with one
jam nut.
C B
Mounting by
inserting body
into a plain hole
and locking with
two jam nuts.
D A
destaco.com Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY