Professional Documents
Culture Documents
Sjcam SJ7 Star 2016
Sjcam SJ7 Star 2016
Once your Remote is paired, you will never need to pair it again. Every time
the SJ7 STAR is turned on, your SJ Remote can control your camera.
The Remote is tested to work at a maximum distance of 30 feet, or 10
meters, Line-Of Sight.
The battery on your Remote will last you a long time as it only uses power
when you press any of the buttons. The remote is powered with a Lithium
CR2032 button-cell battery.
NOTE: To make sure you do not lose any data, only remove or insert your
card while the camera is turned completely off.
PHOTO SIZE › Changes the size of still photos that will be recorded. Of
course, the bigger the size the more detailed your pictures are, at the
expense of file size.
PHOTO QUALITY › Refers to how much compression the output image will
have. The higher the setting the bigger the file is, and will contain more
detail.
LONG EXPOSURE › Sets how long the sensor collects light through the
lens.
PHOTO STAMP › When enabled, will display the time and date on your
photos.
SELF TIMER: Sets a delay timer to trigger the shutter at the set number of
seconds.
TIME LAPSE PHOTO: Sets the interval between a long sequence of shots.
VIDEO QUALITY: Sets how much detail is recorded in the video. Available
in 3 presets: Super Fine, Fine, and Normal.
FOV: Field Of View. The wider the setting, the more parts of the scene are
included in the recording.
NOTE: When using the gyro, 1080p in 30 or 60fps will not have FOV
options as they conflict with stabilization.
AUTO LOW LIGHT: When on, the image sensor will compensate for low
light, at the expense of framecount. Turning the feature off will lock the
framecount to the selected framerate (FPS) regardless of lighting
conditions.
SLOW MOTION: Sets the frame rate to run at the set speed. When
recording in higher FPS, video will appear slow.
GYRO SENSOR: Sets the gyro sensor to stabilize the movement seen in
the frame.
DUAL FILES: Will save 2 versions of the recorded video, one in the
selected resolution and another in low resolution (768 x 432 pixels) for use
in editing.
VIDEO STAMP: When enabled, will display the date and time of your
recording.
TIME LAPSE VIDEO: Sets the time interval between shots; recorded files
will have a single video output (MP4) instead of multiple image files.
● TIP: For a more stable video or photo, turn on the Gyro Sensor. You will
know if it’s active when you see a blinking hand on the upper right hand of
the Display. [ Works in certain resolutions only, FOV off ].
CAR DVR: Enabled powering on the camera and auto-record when the
engine is started. Requires that the camera is plugged in to a car power
adaptor.
● TIP: When using your camera as a dashcam, use a car charger cable and
remove the internal battery to make sure it does not die out while you travel,
and to avoid overcharging / overheating the battery.
● WARNING: Operating your camera while driving a vehicle is potentially
dangerous. It is strongly advised to set up your camera before your trip.
DELAY OFF: In dash cam mode, the camera will power down 10 seconds
later after the engine is turned off.
TV MODE › Options are NTSC or PAL. The color encoding and Framerate
for video recording. Users in the US and Asia use NTSC (60Hz), most other
countries use PAL (50Hz) and is the camera's default. Please check what
you use in your country.
WIFI LED: Enables or disables the LED status indicator for WiFi.
TV OUT: Enabled output via HDMI
BEEP: Enabled camera sounds like power on chime, shutter sounds, etc.
DATE FORMAT: Sets the preferred date format (Y/M/D; D/M/Y; M/D/Y)
WIFI SSID: Change from default WiFi name to anything you want.
FORMAT: Resets the memory card to factory settings, deletes all files.
SJ7 STAR (VERSION): Shows the current firmware version number that is
installed.
FILE MANAGEMENT
You can transfer files from your camera by using any of these 4 methods.
Optional: Format the microSD card on your camera to remove files added
by your mobile device.
Download SJ7 STAR firmware ver1.20 click here (Download size: 56.3MB)
5. Turn the camera on, and the Installation process will begin. The screen may
shut down for a few seconds and the LED lights may blink.
Once done, Format the card, and Skip to number 8.
6. If the installation doesn't proceed when powering the camera on, go to settings
and select Version, shown here encircled in red.
Tap the version number, then the camera will ask you if you want to update the
firmware.
7. Tap the Circle option to begin installation. The screen may shut down for a few
seconds and the LED lights may blink.
8. Turn the camera on again, navigate to version and see if your camera firmware
has updated to the desired version.
SJ7 Star v1.20 Firmware Changelog
1. Adds Gimbal mode
2. EIS (Gyro Stabilization) updated to EIS2.0 (improved stabilization)
3. Adds distortion correction for the following resolutions:
(2.7K*30fps 4:3) (2.7K*30fps SV) (2.7K*30fps 16:9) (2.5k*30fps 16:9)
(1440P*60fps 4:3) (1440P*30fps 4:3) (1080P*60fps 16:9) (1080P*30fps 16:9)
(1080P*60fps SV) (1080P*30fps SV) (960P*60fps 4:3) (960*30fps 4:3) (720P*60fps
16:9) (720P*30fps 16:9)
4. Adds 2160*24fps resolution
5. Optimizes Russian
6. Adds Loop Recording up to 3 minutes (this audio fix is coming).
7. Improves TV mode PAL 720P*120fps SV image quality.
Download SJ7 STAR firmware ver1.20 click here (Download size: 56.3MB)
Download SJ7 STAR firmware ver1.20 click here (Download size: 56.3MB)
Please email tony@sjcamhd.com for the beta firmware for testing or to to report fw bugs.
Please email tony@sjcamhd.com for the beta firmware for testing or to to report fw
bugs.
-SJCAM Team
#############################################################
############SJCAM SJ7 STAR FW Modify History#################
#############################################################
1、Fixed a bug in Photo Lapse that was making the camera to crash
2、Improved the progress bar when playing videos from the album.
3、Modified the Menu when the camera is connected to the computer to avoid
overlapping on the icons.
4、Removed a redundant option on Status LED.
5、Added a notification that recording will be stopped if there is a low speed
SD card
6、Fixed issue that camera will stop recording while the card is full, even
when loop recording is activated
7、Quick capture now shows a warning when the camera is turned on and
there isn't memory card inside.
8、Fixed the issue with the microphone icon when the microphone was
deactivated while recording
9、Revised the Russian Language
10、Pressing the ON button and the the Mode button now turns on the camera
normally
11、Entering in a menu shows the selected setting.
SJCAM V1.05:SJCAM_SJ7_STAR-V1.05_20170222_1725
1. Revised the Japanese translation
2.Updated the mode setting language
3.Modified the texts that had Chinese characters
4.Fixed an issue with the remote control that leaded to black screen.
5.Alert when card is almost full
-----------------------------------------------------------------------------------
SJCAM V1.04 Modified content: SJCAM_SJ7_STAR-V1.04_20170217_1850
1, Fixed the timelapse video through the APP making the camera to freeze.
2, Fixed the problem with the APP while getting the resolution
3, Fixed the icon when using 1280*960 120p 4:3
4, Modified the resolutions on the menu
5, Fixed Recording in App in Time-Lapse the switches to normal video, video
will crash
-----------------------------------------------------------------------------------
SJCAM V1.02 Revised Content:SJCAM_SJ7_STAR-V1.02_20170214_0949
-----------------------------------------------------------------------------------
SJCAM V1.01 Revised Content:SJCAM_SJ7_STAR-V1.01_20170211_2044
1、Fixed the bug with the touch screen not being sensitive.
2、Corrected the bug that caused menus to overlap.
3、Add progressbar to menu setting.
4、Corrected the shot at night being blurred due to inaccurate metering and
overexposure; Add the light metering option and default the option of
"average".
5、Modified the WiFi SSID and password settings.
6、Added new date setting icon.
7、Included Sharpness option into system menu.
8、Included White Balance option into system menu.
9、Move EV value options to the system settings menu
10、Rectify the defaulted EV value.
11、Included ISO option.
12、Included Metering option.
13、Corrected the Quick Capture option to start recording when the camera is
turned ON.
14、Fixed the problem that the current can't decrease to the initial value when
stopped the recording.
15、Corrected the time settings in 12/24 hour time format.
16、Conceal the icon of key action under playback mode, but it can take effect
when touch the screen.
17、Corrected the touch screen where sometimes there were black bars.
18、Added Timelapse video in an independent option.
-----------------------------------------------------------------------------------
SJCAM V1.0 Revised Content:SJCAM_SJ7_STAR-V1.0_20161229_1846.7z
SJ7 Star v1.04 Firmware download link: (note if you can be patient for a few
more days then please be so. This version has not been confirmed to not have
major issues but should be fine). Official release will be announced on the
SJCAMHD.com blog.)
V1.0.6: https://mega.nz/#!JIshAJzA!
RWGz8YAlDU7g28Zd7FzUp6QLNyPqDHmY8RA3gNYAhO8
Version 2 without the dropped frames is here (Locks frame rate in) Please
test/compare.
https://drive.google.com/file/d/0BxHiSpuhpw2AMEsyZ2RuYlRiMlE/view?
usp=sharing
We also moved our SJCAM zone app to amazon servers. Please let us know if
the app is responding faster /less lag now that it is on the cloud:
APP:
https://mega.nz/#!sVFGDAJD!
0y5Y0GDc_meRY1T1apOhgb1bJDmZAB9chSogymT-xWU
Should you have any questions regarding the firmware update, please submit a
ticket or email us at support@sjcamhd.com
Thanks again!
SJ7 Blog