Professional Documents
Culture Documents
Visual inspection
TECHNICAL REPORT
PARTICIPANTS
• Jorge Luis Mata Martínez
Visual inspection:
Day Thursday 7:00-8:20am
Summary
Once assigned the machinery began with the visual inspection machine inspection
was found with photographs of damaged areas.
Introduction
In the following document the practices carried out in the workshop one machine
area of the Technological University of Aguascalientes is displayed.
Practice on visual inspection was performed to the machinery and reporting the
results obtained in the following report.
Experimental Method
Equipment used:
It was on the machine that was assigned to us.
Once assigned the machinery began with the visual inspection machine inspection
was found with photographs of the damaged areas and the following is reported
Results
The defects were found with visual inspection were as shown below:
I. The router is not stable as it lacks the screws on the floor or
work area.
II. The Workspace is in poor condition (it is boring).
Conclusion
Visual inspection is the primary method for detecting faults in equipment
and even in some process in the industry, it is the first accurate way of
knowing that errors or defects have. That's how we manage to detect
errors that were in the mill and to report them and then take the correct
decision