ULE OF ITEMS FOR CONSTRUCTION OF NAYAS COLONY ITARSI TO NH 69
APPROCH ROAD ITARS!
PAC Rs.
93.84
Lacs
SORE
5
Items of work
Quantity
Unit
Amount
SOR ItNO3.3
5 Excavation in Soi using Hydraulic Excavator
land Tippers with disposal upto 1000. metres.
[Excavation for roadwork in soil with hycrauic|
lexcavator including cutting and loading in tippers,
ltimming bottom and side slopes, in accordance|
lwith requirements. of lines, grades and cross|
sections, and transporting to the embankme
location with all its and lead upto 1000m 2s per
relevent clauses of section-300 of specification
1119.95
Cum
45.00
0371.00
‘SOR ItNo 3.10
13 Embankment Construction with Material
[Obtained from Borrow Pits Construction
Jembankment with approved material _having|
ICBR>7 obtained from borrow pits with all lifts and]
leads, transporting to site, spreading, grading to]
required slope and compacting to meet}
requirement of table 300-1, 300-2 and as per]
relevent clauses of section-300.
‘Cum
144.00
1218525.00
SOR ItNO 4.13,
l&.73, Construction of Shoulders with approved|
Imaterial/selected soil ic excavation all its & leads]
ic grading to required slope & camber of 4% and|
lcompacting using vibratory roller of 80 to 100 kN
static weight to meet requirement as per relevant]
(A) Earthen Shoulder (CBR value >7)
2165.13
cum
181.00,
300079.00
‘SOR It NO4.12
412 Crusher Run Macadam Sub Base/Base|
ICourse Providing crushed stone aggregate,
ldepositing on a prepared surface by hauling|
lvehicies, spreading and mixing with a motor]
lorader, watering and compacting with a vibratory)
roller to clause 410 to form a layer of sub-|
lbase/Base in accordance to Table No. 400-14, 41
HS and as per clause of section 407 off
|specifcations. (i) For 53 mm maximum size
1743.50
cum
987.00
1668530.00
SOR ItNO4.11
att Wet Mix Macadam Providing, laying,
|spreading and compacting graded stone aggregate|
lto wet mix macadam specification including]
premixing the Material with water at OMC in|
mechanical mix plant carriage of mixed Material by|
tipper to site, laying in uniform layers with paver in|
|sub- base / base course on well prepared surface|
land compacting with vibratory roler to achieve the|
|desired density in accordance to Table No. 400-12,
1400-13 and as per clause of section 406 of
|specifications.
1216.00
Cum
1261.00
1532115.00
SORItNO 5.1
5.1 Prime coat Providing and applying primer coal
lwith bitumen emulsion on prepared surface of
lgranuiar Base including clearing of road surace|
land spraying primer at the rate of 0.75 kg/sam|
lusing mechanical means as per clause $02 of
|specifcations.
5400.00
‘Sqm
172800.00
5.24)
‘SOR It NO
[6.2 Providing and applying tack coat with catonig|
bitumen emulsion (RS-1) using emulsion pressure]
ldistrbutor on the prepared bituminous/granuiar
surface cleaned with mechanical broom and as per
relevant clauses of section-503 of specifications.Q
7
SORItNO58i
Ti @0.30 Kg per sqm (ary & hungry bituminous]
|surfaces/granular surfaces treated with primer)
‘Sqm
14.00
75600.00
58 Open - Graded Premix Surfacing Providing,
laying and roling of open - graded premix surfacing]
lof 20 mm thickness composed of 13.2 mm to 58|
Imm aggregates either using penetration grade|
bitumen or cut-back or emulsion to required tine,
lgrade and level to serve as wearing course on a|
previously prepared base, including mixing in al
suitable plant, laying and roling with a smocth
lwheeled roller 8-10 tonne capacity, finished to
required level_and grades all complete as_per
[Case - I. Mechanical method using Penetration|
5400.00
710.00
'594000,00)
SOR It NO 5.10(i)
15.10 Seal Coat Providing and laying seal coal
sealing the voids in a bituminous surface laid to the|
|specified levels, grade and cross fall using Type A]
land 8 seal coats all complete as per clause 511 of
[case - II. Type 8 (Providing and laying of premix]
|sand seal coat with HMP of appropriate capacity]
not less than 75 tonnes! hours using crushed stone]
[chipping 6.7 mm size and penetration bitumen
suitable grade, all complete as per clause 511
5400.00
‘Sqm
45.00
+243000.00
SORItNO83
[8.3 Retro- reflectorised Traffic signs Providing and]
fixing of reto-reflectrised cautionary, mandatory
Jand informatory sign board as per IRC 67-2010|
made of high intensity Micro-Prismatic Grade|
Sheeting (Type XI) vide cause 801.33 fixed over
[Aluminium "composite material sheet with
Inermoplastic core of Low density polyetylene|
(LOPE) between two thick skinsisheets of
laiuminium with overall thickness of 4mm and]
laiuminium skin of thickness 0.3 on both sie, the|
|ACM shall conform to Table 800-1 of specification]
lana High intensity Micro Prismatck Grade Sheeting
shall conform to Table 800-3 of specication. The|
printing on the high intensity grade sheeting shall
Jconform to Clause 801.37 with water based late|
loptmized transparent ink as specified by the|
sheeting manufacturer, supported on a mild steel
langle iron post 75 mm x 75 mm x 6 mm firmly
lined to ground by means of properly designed|
‘90 em equilateral Wiangle
2.00
Each
3291.00 | 6582.00
7) 60 cm equilateral tangle
3.00
Each
2340.00 [_7020.00
[ivy 80 mim x 60 mm rectangular
3.00
Each
3928.00 | 11784.00JE6 Direction and Place Identification signs upto 09]
lsqm size board. Providing and fixing of retro,
Jreflectorised cautionary, mandatory —_and|
informatory sign board as per IRC 67-2010 made|
lof high intensity Micro-Prismatic Grade Sheeting
(Type XI) vide clause 801.3.3 fixed over Aluminium|
lcomposite material sheet with thermoplastic core|
lof Low density polyethylene (LDPE) between two|
thick skins/sheets of aluminium with overall!
thickness of mm and aluminium skin of thickness]
0.3 on both side, the ACM shall conform to Table]
1800-1 of specification and High Intensity Micro]
|Prismatck Grade Sheeting shall conform to Table]
1800-3 of specification. The printing on the high|
intensity grade sheeting shall conform to Ciause|
1801.37 with water based latex optimizea|
|tensparent ink as specified by the sheeting|
manufacturer, supported on mild steel! angle iron|
post 75 mm x 75 mm x 6 mm firmly fixed to ground]
by means of properly designed foundation with
17494,00
[8.16 Kilo Metre StoneReinforced cement concrete]
IM15grade kilometre stone of standard design as|
|per 1RC:8-1980, fixing in position including painting
[() Sth kilometre stone (precast)
[Wi) Ordinary Kilometer stone (Precast)
[tay Hectometer stone (Precast)
[8.18 Boundary pilar Reinforced cement concrete]
IM15 grade boundary pillars of standard design as|
lper IRC:25-1967, fixed in position including
finishing and lettering but excluding painting
[61 Dry Lean Cement Concrete Sub- base]
[Construction of dry lean cement concrete Sub-|
lbase over a prepared sub-grade with coarse and|
Hine aggregate conforming to IS: 383, the size off
[coarse aggregate not exceeding 25 mm, aggregate|
cement ratio not to exceed 15:1, aggregate|
jgradation after blending to be as per table 600-1,
|cement content not to be less than 150 kg/ cum|
Joptimum moisture content to be determined during|
Iial length construction, concrete strength not to]
be less than 10 Mpa at 7 days, mixed in a batching]
lant, transported to site, laid with a paver with]
lelectronic sensor, compacting with 8- 10 tonnes|lem No 6.3
[63 Cement Concrete Pavement Construction
lun-reinforced, dowel jointed, plain cement concrete]
ipavement M-40 grade concrete over a prepared|
|sub base with cement , coarse and fine aggregate|
lconforming to 1S 383, maximum size of coarse|
laggregate not exceeding 25 mm, mixed in al
batching and mixing plant as per approved mix|
|design, transported to site, laid with a fixed form or|
[sip form paver, spread, compacted and finished in|
la continuous operation including provision
lcontraction, expansion, construction _and|
longitudinal joints, joint filler, separation]
membrane, sealant primer, joint sealant,
ldebonding strip, admixtures as approved, curing|
lcompound, finishing to lines and grades 4s per]
ldrawing as per IRC 15 2011 and as per relevant]
clauses of section 602 of specifications complete|
lbut excluding cost of stee! in dowel bar and tie rods|
ete.
187.50
cum
5153.00
1966188.00
6
Item No
6.12
l12 Add extra in tem NoSS, 64, 66 & 610)
lavove for the cost of steel in dowel bar and tie rod|
including cradle, laps etc. complete required as|
per design
[@) Mid steel
123,
wT
720268.00)
58717800
6
SOR ltem No 12.4
21 Excavation for Structures Earth work i
lexcavation of foundation of structures as. per]
Jdrawing and technical specication, including
setting out, construction of shoring and bracing,
Jremoval of stumps and other deleterious matter,
ldressing of sides and bottom and backfiing with
lapproved material. as per relevant ciauses off
section 300 & 2100 in
[0 Ordinary sol (6) Mechanical Means () Depth]
17494
148.00
25892,00
7
\ Inominal mix in foundation as per relevant ciauses|
123 Providing Plain cement concrete M-16|
lof sections 1500, 1700 and 2100.
18.30
Cum
4299.00
78672.00
7
2.8 Provdling and laying Plain/Reinforced cement]
lconcrete in open foundation including form work]
|shuttering etc. complete as per drawing and|
ltechnical specifications and as per relevant]
|clauses of sections 1500, 1700 & 2100.
(A) PCC Grade M20
78.60
‘Cum
4572.00
359360.00
18
‘Supping, fiting and placing HYSD bar
reinforcement in superstructure complete as per|
0.40
MT
49081.00)
19633.00
20
sso ene tri ape Et
9.1 PCC M-15 in Foundation Plain come
concrete M-18 mix with crushed stone aggregate
Ico mm nominal size mechanically mixed, placed
in foundation and compacted by vibration including
curing for 14 days. as per MORT8H Specification
408.
13.76
cum | 3409.00
46908.00
a
23 Providing Plain cement concrete M-T6|
Jnominal mix in foundation as per relevant clauses)
lof sections 1500, 1700 and 2100.
4.30
cum | 4299.00
18486,00
@
l6-13 Providing and laying reinforced cement]
|concrete pipe 300mm dia NP-4 for service ducts|
below concrete pavement.
100.00
Rmt | 713.00
71300.00[8.8 Providing P.C.C. M-18 Nominal mix for hume]
lnipe culverts in foundation and sub structure etc.
las per drawing and as per relevant clauses of]
|section 1500, 1700, 2100 and 2900.
192 Laying Reinforced Cement Concrete Pipa|
INPa/prestresed concrete pipe on frst class
lbecding in single row. Providing and Laying
Reinforced cement concrete pipe NPA/prestrssed
concrete pipe for culverts on frst class bedding of
Jgranular material (cost of bedding included) in|
single row including thing collar with cement
mortar 1:2 but excluding excavation, protection}
lworks, backfiling, concrete and masonry works in
[e) 1200 mm dia
ISuppiying, fitting and placing HYSD _ bar
reinforcement in substructure complete as_per
ldrawing and technical specifications as per
relevant clauses of section 1600 (Amdt. No. 2 Dt]
15/01/16)
isk Adbth
ea Divisional
Sub EnGineer Officer
P.w.0! Sub Dn. ‘Sub
Hosangabad Division
Executive Engineer
PWD Sub Division
Hoshangabad