Professional Documents
Culture Documents
Horsepower Gross: 1411 KW 1892 HP at 1800 RPM Net: 1316 KW 1765 HP at 1800 RPM Bucket Capacity 18.0-35.0 M
Horsepower Gross: 1411 KW 1892 HP at 1800 RPM Net: 1316 KW 1765 HP at 1800 RPM Bucket Capacity 18.0-35.0 M
WA1200-6
WA
1200
WHEEL LOADER
WALK-AROUND
2
WHEEL LOADER
WA1200-6
HORSEPOWER
Gross: 1411 kW 1892 HP @ 1800 rpm
High Reliability & Durability Net: 1316 kW 1765 HP @ 1800 rpm
Easy Maintenance
● Tire saver ● Auto-greasing system ● Maintenance accessibility
● Long oil replacement interval ● EMMS (Equipment Management ● Safety features
● Oil sealed loader linkage pins Monitoring System) ● Rear access stairs
● Centralized filter layout ● KOMTRAX Plus
● Quick fluid change-out system
See pages 12 and 13.
3
WA1200-6 W HEEL L OADER
Bucket capacities
20.0 m3 26.2 cu.yd
4
WHEEL LOADER
WA1200-6
5
WA1200-6 W HEEL L OADER
Switch pump
6
WHEEL LOADER
WA1200-6
PNC (Pump Neutral Cut) Control System for Hydraulic Pump Variable Displacement Steering Pump + CLSS
The variable displacement piston pump combined with the The variable displacement steering pump, combined with the
PNC (Pump Neutral Cut) system, use only the required Closed-center Load Sensing System, delivers just the
amount of oil flow for the work, so it does not waste oil hydraulic flow the steering requires. This prevents wasted
pressure. This function reduces the fuel rate by controlling hydraulic pressure and contributes to increased fuel
the pump discharge, when not operating the work equipment. economy.
Variable Displacement Piston Pump Fixed Displacement Piston Pump Variable Displacement Steering Pump Fixed Displacement Steering Pump
AJSS lever AJSS lever
Quick movement Quick movement
PPC.V
Controller & EPC.V
Pump Valve Pump Valve Pump Valve Pump Valve
7
WA1200-6 W HEEL L OADER
High-rigidity Frame
Engine Pre-lube System To increase frame
Engine durability is achieved by raising the oil pressure reliability, steel
before starting. castings have been
When the key is turned, the pre-lubrication pump sends oil incorporated at all
from the pan to the filter. When the set oil pressure is pivot points to
reached, then the starter motor engages to start the engine. eliminate long weld
lengths.
Low Maintenance Brake System
The WA1200-6 uses Komatsu designed sealed wet disc
brakes. This proven design, coupled with a brake oil cooling
system, provides reliable and durable final drive braking while
downhill traveling with full loads and in all load and carry Sealed DT Connectors
operations. Main harnesses and controller connectors are equipped
with sealed DT connectors
providing high reliability, dust and
corrosion resistance.
8
WHEEL LOADER
WA1200-6
Flat Face-to-face O-ring Seals Sweeper Wing (Large Size Tire Guard)
Flat face-to-face O-ring seals are used To prevent tire damage, the WA1200-6 provides a Sweeper
nipple
to securely seal hydraulic hose Wing (large size tire
connections and to prevent guard) on both sides of
oil leakage. bucket.
In addition, buffer rings are hose O-ring
installed to the head side of
buffer rings
the all-hydraulic cylinders to
lower the load on the rod
seals and maximize
reliability. dust seal
rod packing
9
WA1200-6 W HEEL L OADER
OPERATOR ENVIRONMENT
Easy Operation
Automatic Transmission with Variable Transmission Cut-off System
ECMV (Electronically Controlled Modulation Valve) Transmission cut-off position of the left brake pedal is
Automatic transmission with ECMV automatically selects the optionally adjustable by switch operation at operator’s seat.
proper gear speed based on travel speed, engine speed, and By adjusting the cut-off position according to the type of
other travel conditions. The ECMV engages the clutch work, the inching operation becomes easy and increases
smoothly to help prevent lag and shock when shifting. efficiency.
This system provides efficient machine operation for a 1) When loading, adjust the cut-off pressure to low.
comfortable ride. Then the impact of braking is low to prevent spillage.
● Kick-down switch: 1st 2nd 2) When traveling, adjust the cut-off pressure to high.
Powerful scooping is available 1st hold
Load applied to brake will be lighter by using engine brake
by shifting down to the 1st. while decelerating.
2nd hold
speed, by pressing the kick
kick-down switch
down switch on the upper
boom lever, when the lever is at the 2nd. position.
10
WHEEL LOADER
WA1200-6
Comfortable Operation
Roomy, Quiet Cab with Power Windows Pillar-less Large Cab with ROPS / FOPS Canopy
The cab is large, with a comfortably spacious interior and A wide pillar-less flat
power windows. Also, a wide viewing angle is guaranteed glass provides excellent
because the cab is pillar-less. By front visibility. The wiper
adopting a high-capacity air arm covers a large
conditioner, Komatsu ensures area to provide great
operator comfort, no matter the visibility even on rainy
exterior conditions. Other features days.
designed with operators in mind
include a lunchbox storage space.
Lunchbox storage space
11
WA1200-6 W HEEL L OADER
EASY MAINTENANCE
Tire Saver Fluid Drain from the Ground
The tire saver is quite Hydraulic oil, transmission/torque
effective for converter oil, engine oil, and engine
extending the service coolant can all be changed from the
life of tires. It senses ground. A fast-fill fuel system is also
the tire that slips with included as standard equipment.
a speed sensor, then
controls the torque
converter with the Auto-greasing System
modulated clutch and
Except for the drive shaft, greasing is automatically done to
stops the tire slip.
the regular points with a preset amount and interval.
12
WHEEL LOADER
WA1200-6
Maintenance Accessibility
Satellite
communication(option)
Customer
KOMTRAX Plus is a management system for large KOMATSU job site
13
WA1200-6 W HEEL L OADER
SPECIFICATIONS
ENGINE HYDRAULIC SYSTEM
Model . . . . . . . . . . . . . . . . . . . . . . . . . . .Komatsu SSDA16V160E-2 Rated capacity (discharge flow) @1800 engine rpm
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Water-cooled, 4-cycle Loader pump . . . . . . . . . . . . . . . . . . . . . . 1018 ltr/min 269 gal/min
Aspiration . . . . . . . . . . . . . . . . . . . . .Turbocharged and aftercooled Steering pump . . . . . . . . . . . . . . . . . . . . . . 633 ltr/min 167 gal/min
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Switch pump . . . . . . . . . . . . . . . . . . . . . . . 633 ltr/min 167 gal/min
Bore x stroke . . . . . . . . . . . . . . . . .159 mm x 190 mm 6.26" x 7.48" Relief valve setting . . . . . . . . . . . . . . 31.4MPa 320 kg/cm2 4,550 psi
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . .60.0 ltr 3661 in3 Control valves . . . . . . . . . . . . A double spool closed-center hydraulic
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electronic fuel control valve and a steering valve combined with
Horsepower a demand valve to provide optimum flow.
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . .Gross 1411 kW 1892 HP
ISO 9249/SAE J1349 . . . . . . . . . . . . . . . . .Net 1316 kW 1765 HP Hydraulic Number of
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1800 rpm Cylinders Cylinders Bore Stroke
Fan drive method for radiator cooling . . . . . . . . . . . . . . . .Mechanical Boom 2 360 mm 14.2" 1835 mm 72.2"
Fuel system . . . . . . . . . .Modular common rail system direct injection Bucket 2 300 mm 11.8" 985 mm 38.8"
Lubrication system: Steering 2 225 mm 8.9" 660 mm 26.0"
Method . . . . . . . . . . . . . . . . . . . . . .Screw pump, forced lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow Control positions:
Air cleaner . . . . . . . . . .Dry-type with double elements and automatic Boom . . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
dust evacuation with dust indicator on monitor Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . Tilt-back, hold, and dump
EPA Tier 2 emission certified. Hydraulic cycle time (rated load in bucket)
Raise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.8 sec
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 sec
TRANSMISSION Lower (Empty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 sec
Torque converter:
Type . . . . . . . . . . . . . . . . . . . .3-element, single-stage, single-phase
ROPS / FOPS & CAB
Transmission:
Type . . . . . . . .Full-powershift, planetary type with modulated clutch Structure complies with ISO 3471 ROPS (Roll-Over Protective
Travel speed: km/h mph Structure) standards, as well as ISO 3449 FOPS (Falling Object
Measured with 60/80 R57 tires Protective Structure) standards. The cab is mounted on viscous
1st 2nd 3rd damping mounts and is well insulated.
Forward 6.1 3.8 11.1 6.9 18.7 11.6
Reverse 6.3 3.9 11.4 7.1 19.3 12.0
SERVICE REFILL CAPACITIES
TIRES
BRAKES
Select proper tires based on job requirements.
Service brakes . . . . . . . . . . . . . . . . . . . . . . . .Hydraulically actuated, Standard rim size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47.00-57/5.0
wet, multiple-disc brakes actuated on four wheels. Standard tire size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60/80 R57
Parking brake . . . . .Wet, multiple-disc, hydraulically-released, spring
applied in the transmission.
BUCKET SELECTION GUIDE
STEERING SYSTEM Bucket fill factor
Coal Bucket
Turning radius outside corner of bucket and teeth . . .14330 mm 47'0" 35.0 45.8 (spade nose without teeth)
Rock Bucket
20.0 26.2 (spade nose with teeth)
High lift Boom
Coal Bucket
BUCKET CONTROLS 35.0 45.8 (spade nose without teeth)
Rock Bucket
Control positions 18.0 23.5 (spade nose with teeth)
Boom . . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float lb/yd3 1011 1348 1685 2023 2360 2698 3035 3372
kg/m3 600 800 1000 1200 1400 1600 1800 2000
Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . Tilt-back, hold, and dump
Material density: kg/m3 lb/yd3
14
WHEEL LOADER
WA1200-6
DIMENSIONS
40°
64°
K J H I
45°
40° O
M
B
M t th
Tur
in e
a
nun L G
im ce
50 °
g F
um n
rad
ius
tu er o
out
rn f
t
sid
in ou
ec
g ts
orn
ra id
er o C E
di e
f bu D
us tir
cke
t R Q A
e
Change
Operating Tipping load Tipping load Width Ground
straight full turn in vertical
weight over tires clearance
Tires or attachments dimensions
STD Boom Hi-lift Boom STD Boom Hi-lift Boom
kg lb kg lb kg lb kg lb kg lb mm ft in mm ft in mm ft in
60/80 R57 0 0 0 0 0 0 0 0 0 0 5820 19'1" 760 2'6" 0 0
58/85-57-84PR +820 +1810 +600 +1320 +540 +1190 +520 +1150 +470 +1040 5720 18'9" 765 2'6" +5 +0.2"
STANDARD EQUIPMENT
● 2-spool valve for boom and bucket ● Dualmode active working system ● Power windows
controls ● Electronic display/Multi Monitor ● Rear access stairs
● 6200 mm 20'4" boom ● Emergency brake ● Rearview mirror and rear underview
● Alternator, 140 A/24 V ● Emergency engine stop switches mirror mounted to radiator guard
● AM/FM radio ● Emergency steering (SAE) ● Rims, 47.00-57/5.0
● Air conditioner, heater, ● Engine, Komatsu SSDA16V160E-2 diesel ● Room mirror
defroster & pressurizer ● EPC fingertip control levers with automatic ● Seat belt, 76 mm 3" with retractor
● Automatic greasing system leveler and positioner ● Seat, air suspension with reclining
● Automatic transmission F3 / R3 ● Fenders, front and left rear ● Starting motor, 9.0 kW/24 V x 2
● Axles, full floating ● Floor mat ● Steering, full hydraulic power
● Back-up alarm ● Hard water area arrangement (joystick steering control)
● Back-up light (corrosion resister) ● Sun visor
● Batteries, 160 Ah/12 V x 6 ● Horn, electric ● Tire saver (modulation clutch controlled)
● Battery disconnect switch ● KOMTRAX Plus ● Vandalism protection kit
● Boom kick-out, automatic ● Lights ● Water separator
and adjustable —Backup light ● Wiggins fast fuel fill
● Brakes: —Head lights (4 front) ● Wiggins fast oil fill
—Service: wet, multiple-disc —Stop and tail ● Wind washer, front and rear
—Parking: wet, multiple-disc —Turn signal with hazard switch ● Wipers, front and rear, front intermittent
● Bucket positioner (2 front, 2 rear)
● Cab with ROPS/FOPS canopy —Working lights (6 front, 8 rear)
● Converter, 2.5 amps 12 volt —Access stairs and service area light
● Counterweight, standard ● Load meter
OPTIONAL EQUIPMENT