Professional Documents
Culture Documents
BELAZ 75137 USA and Canada PDF
BELAZ 75137 USA and Canada PDF
Engine Steering
Model CUMMINS QSK 45C Hydrostatic steering with steerable front wheels.
Fourcycle gasturbocharged and intercooled direct injection diesel Metric, m SAE, ft
engine with Vtype cylinders and electronic control system. Steering angle, degree 42 42
Meets Tier 2 emission requirements. Turning radius 13 43
Metric SAE Overall turning diameter 28 92
Rated power @ 1900 rpm, kW/ hp 1193 1600 The steering meets ISO 5010 requirements.
Maximum torque @ 1500 rpm, N.m/ ft lbs 6836 5041
Number of cylinders
Cylinders displacement, l/ cu in
12
45
12
2746
Brakes
Dump truck brake system meets ISO 3450 international safety regulations
and requirements. The system is equipped with service, parking, retarding
Air cleaning is performed by threestage filter with drytype elements. and emergency brake systems.
Engine exhaust routed through body. Service brake system
Circulating lubrication system is pressurized and designed with wet Front wheel brakes disc type with two brake calipers per one disc.
sump. Singleloop fluid cooling system with forced circulation. Rear wheel brakes disc type with one brake caliper per each disc
Fluid preheating system. and automatic slack adjustment. Discs are installed on the traction
Pneumatic starter. electric motor shafts.
Electric equipment system voltage, V 24 Brake drive hydraulic, separate for the front and rear wheels.
Parking brake system with one brake unit per side, normally closed.
Brake actuation by spring.
Electric Drive Brake control hydraulic.
Drive options are AC/DC and AC/AC. Planetary double row gear reduction Retarder system retarding by traction electric motors in generator mode
with AC/DC and Electrosila, single row gear reduction with GE. with forced air cooled resistors.
Transmission ratio 30.36:1 (UVTR 2x600, power 1200kW).
Maximum dump truck travel speed, km/h/ mph 4864/ 3040
Emergency brake system parking brake system combined with
Belaz AC GE AC Electrosila AC operating wheel brake circuit.
Traction alternator
Traction motor Belaz DC GE AC Electrosila AC Hydraulic Drive
Reduction gear Belaz GE Belaz Hydraulic system is combined for body dumping gear, steering and brakes
actuator. The system is equipped with variabledisplacement axialpiston
oil pump and threestage telescopic body lifting cylinders with one stage
Suspension of double action.
Suspension is conventional for front and drive axle, equipped Body lifting time, sec 20
with trailing arms, central joints and transverse rods. Cylinders are Body lowering time, sec 18
pneumohydraulic (nitrogen and oil) and equipped with built in hydraulic Maximum pressure in hydraulic system, MPa 18
shock absorber. Two cylinders are on the front axle and two cylinders are Maximum pump delivery @ 1900 rpm, dm3/min/ gal/min 474/ 25
on the rear axle. Filtration degree, mcm 10
Cylinder piston stroke Metric, mm SAE, in
front 320 13
rear 290 11
Body Frame
Welded buckettype body with FOPS safety system, protective canopy, Frame is welded of highstrength lowalloy steel with castings
engine exhaust heating, device for mechanical fixing in raised position, at the maximum loading points with boxsection variableheight
and rockejectors. sidemembers interconnected by crossmembers.
Body capacity:
struck heaped 2:1
Metric, m3 SAE, yd3 Metric, m3 SAE, yd3
45.5 60 71.2 93
50.1 66 75.5 99
55.0 72 80.0 105
59.6 78 84.0 110
63.4 83 86.6 113
103.8 136 134.8 176