This document provides a detail of the joint construction between Block A and Block B. It specifies that the joint will connect two W14x257 columns using welded sheet metal with a thickness of 10mm and 400mm width. Reinforcing bars and stiffeners will be added using E-6010 and E-7018 welds, including #4 rebar at 0.65 feet. IPN 500 sections and support sheets 25mm thick will be used as the right and left brackets.
This document provides a detail of the joint construction between Block A and Block B. It specifies that the joint will connect two W14x257 columns using welded sheet metal with a thickness of 10mm and 400mm width. Reinforcing bars and stiffeners will be added using E-6010 and E-7018 welds, including #4 rebar at 0.65 feet. IPN 500 sections and support sheets 25mm thick will be used as the right and left brackets.
This document provides a detail of the joint construction between Block A and Block B. It specifies that the joint will connect two W14x257 columns using welded sheet metal with a thickness of 10mm and 400mm width. Reinforcing bars and stiffeners will be added using E-6010 and E-7018 welds, including #4 rebar at 0.65 feet. IPN 500 sections and support sheets 25mm thick will be used as the right and left brackets.