Professional Documents
Culture Documents
1. Main Headings
o Times New Roman
o Size 14
o Bold
2. Sub Headings
o Times New Roman
o Size 12
o Bold
3. Simple Text
o Times New Roman
o Size 12
o Justified Text
4. Use A4 size Page Settings with 1” margin on all sides of Page.
5. All Figures & Tables should be centralized.
6. All Red entries in the Format (Attached) have to be Change with own Particulars.
7. After getting signature on “Certificate of Approval” page from every individual member on Spiral Binding
submit the Spiral Binding to HoD Office (Project Coordinator) latest by May 20, 2017.
8. Number of Hard Copies Required: 04
a. Supervisor 01
b. Co Supervisor 01
c. Office of Head of Department 01
d. Library 01
9. Final Thesis Copy Should be submitted to offices of mention above before __________.
10. Thesis Copy Style & Color:
a. Thesis Copy Color: Black
b. Thesis Copy Writing on Front Page Color: Golden
c. Page attached after instruction is Cover Page of thesis.
INTELLIGENT SOLAR TRACKING AND CLEANING WITH
DUAL AXIS
Supervisor Co-Supervisor
Engr. Muhammad Asif Rashid Jamil Satti
Assistant Professor Lecturer
Submitted By
Supervisor Co-Supervisor
Engr. Muhammad Asif Rashid Jamil Satti
Assistant Professor Lecturer
Submitted By
Accepted by the Department of Electrical Engineering, Swedish College of Engineering & Technology, Wah
Cantt in partial fulfillment of the requirement for the BSc. Degree in Electrical Engineering.
_______________________
Head of Department
Engr. Prof. Dr. Umar Farooq
Professor
_______________________ _______________________
Supervisor Co-Supervisor
Engr. Muhammad Asif Engr. Rashid Jamil Satti
Assistant Professor Lecturer
_______________________ _______________________
Engr. Dr. Aftab Hussain Engr. Fayyaz A. Chaudhry
Assistant Professor Assistant Professor
_______________________ _______________________
Engr. Waqas Mehmood Engr. Muhammad Asif
Assistant Professor Assistant Professor
DECLARATION
We certify that project work titled “Intelligent Solar Tracking and Cleaning with Dual Axis” is
our own work and has not been presented elsewhere for assessment. Moreover, the material taken from
other sources has also been acknowledged properly.
_________________ _________________
Muhammad Ammad Laghari Kashif Ali
UET-13-SCET-EE-073 UET-13-SCET-EE-044
____________________ __________________
Mudassar Mushtaq Raheel Saeed
UET-13-SCET-EE-060 UET-13-SCET-EE-041
DEDICATION
To our parents, whose prayers and inspirations are the torches of our destination, our teachers those
who sacrificed for our prosperous future and our friends those who inspired us for the higher ideas of life.
Can Be Changed……
ACKNOWLEDGEMENT
All praise to Almighty Allah, who give us courage and spirit to complete the task, respect is for the last Holy
Prophet Muhammad (P.B.U.H) whose life is a model of guidance and knowledge for entire humanity
We are extremely thankful to our project supervisor ENGR. MUHAMMAD ASIF and Co Supervisor
ENGR. RASHID JAMIL SATTI for giving us time and guidance in this project and also thankful to all the
teacher of Electrical Department. We cannot forget so many friends who always have been there for us.
ABSTRACT
Table of Contents
LIST OF FIGURES
List of Tables
CHAPTER NO 1
INTRODUCTION
References
Example:
Recent years have witnessed an increased demand of electricity supply and complex usage patterns of power
systems. These challenges demand a significant improvement in design and operation of power systems. To
address these issues, researchers have proposed CPSs approach to the design of power systems [1] . CPS
refers to the system which offer close integration between cyber and physical components at all levels. The
close interaction between cyber and physical components in the CPSs presents significant challenges in their
development [2].
[1] Horvath, I. and B.H. Gerritsen. Cyber-physical systems: Concepts, technologies and implementation
principles. in Proceedings of TMCE. 2012.
[2] Lee, E.A. Cyber physical systems: Design challenges. in Object Oriented Real-Time Distributed
Computing (ISORC), 2008 11th IEEE International Symposium on. 2008. IEEE.