Professional Documents
Culture Documents
::
NDT Accessories
SELECTION CHART
Automag pi 31 is a general purpose block with arti icial cracks. The standard dimension of the block is 12mm X 50mm X
75mm. A groove of 1.6mm deep and 2mm wide is machined across the centre of each face making two halfs marked as
SecA and Sec.B. This is to permit side by side comparison without cross contamination between two different
penetrants.
For consistency and reproducibility of test resullts from penetrant inspection, arti icially produced defects are used
which can rate and compare overall system effectively.
Download Datasheet
Automag Shims are used for establishing ield direction and strength in multidirectional magnetization. It is vitally
important that the ield intensity in such magnetization is balanced in all direction so that ield of one direction does
not overwhelm the the other.
Download Datasheet
Automag Strips are used for establishing ield direction and strength in multidirectional magnetization. It is vitally
important that the ield intensity in such magnetization is balanced in all direction so that ield of one direction does
not overwhelm the the other.
Download Datasheet
Automag Handyoke is a light weight electromagnetic yoke for magnetisation in detection of surface and sub-surface
laws in any ferro-magnetic
Download Datasheet
http://www.pradeepndt.com/NDT-accessories.html 1/3
3/6/2018 :: Welcome to Pradeep Metal Treatment Pvt. Ltd. ::
Digital Gauss Meter is an instrument used for measurement of residual magnetic ield on the job during Magnetic
Particle inspection or otherwise. It also measures magnetic ield created by DC Magnetisation.
Download Datasheet
Qualitech Ketoes ring is manufactured as per ASTM-E 1444 from round annealed stock of 01 tool steel. It has through
drilled holes on circumferential periphery at speci ied distances. It is supplied with copper conductor (optional) of 31.7
mm diameter which can pass through the centre of Ketoes ring.
Download Datasheet
Lux Meter is used to measure amount of light. Qualitech – LX Lux Meter is a precision digital instrument to measure the
amount of light at the area of interest. It is user friendly portable hand held instrument which provides direct reading
on display. It consists of a durable case with digital display and controls. The Photodiode sensor is connected to the
main instrument with lexible cable.
Download Datasheet
Nickel- Chromium Test Panels are used for testing sensitivity of Dye penetrants. They are brass plates plated with nickel
and chromium of known thickness having linear parallel cracks.
Download Datasheet
Qualitech Pie Field Indicator (Pie guage) is used to indicate the direction of magnetic ield. It is a non quantitative device
and not quantitative indicator of ield strength.
Download Datasheet
Ultraviolet light intensity meter is used to measure amount of ultraviolet light (black light) intensity emitted during
testing at the area of interest. It is user friendly portable hand held instrument which provides direct reading on display.
It consists of a durable case with digital display and controls.
Download Datasheet
Qualitech Ultraviolet light LED based black light assembly is in accordance with various standards and latest state of art
in science and technology for penetrant and magnetic particle inspection processes. These lights generate emit
ultraviolet light with a wavelength of 365 nanometers which is recommended for NDT inspection. It is light weight user
friendly portable hand held instrument.
Download Datasheet
Automag pi 31
Automag Shims
Automag Strips
Automag Handyoke
Digital Gauss Meter
Qualitech Ketoes ring
Lux Meter
Nickel- Chromium Test Panels
Qualitech Pie Field Indicator (Pie guage)
Ultraviolet light intensity meter
http://www.pradeepndt.com/NDT-accessories.html 2/3
3/6/2018 :: Welcome to Pradeep Metal Treatment Pvt. Ltd. ::
Qualitech Ultraviolet light LED based black light assembly
http://www.pradeepndt.com/NDT-accessories.html 3/3