Professional Documents
Culture Documents
BO ResultSetSizeLimit AA调整结果集大小 for Analysis2.x
BO ResultSetSizeLimit AA调整结果集大小 for Analysis2.x
You can change result size with the DataSourceConfiguration parameter ResultSetSizeLimit.
In AO Administrator’s Guide the parameter is described as following:
This setting defines the maximum number of data cells that are loaded from the server for one data source.
If a data source contains data for more cells than defined here, a message displays.
The standard value for this setting is empty and the maximum number of cells is 500000.
If you set the parameter to a specific number greater than or equal to 0, you define the maximum number of
cells with this value.
If you set the parameter to -1, the setting uses the values defined in the BW system.
In AO 2.x, the settings are maintained in the file system and not in the registry like in AO 1.x versions.
The ResultSetSizeLimit setting can be maintained in Ao_app.config (located in %PROGRAMDATA%\Sap\Cof)
or Ao_user_roaming.config (located in %APPDATA%\Sap\Cof).
When scheduling Analysis workbooks, the ResultSetSizeLimit setting is maintained
in AO_BiPrecalculation.config (located in Analysis Precalculation installation folder).
Please follow note 2083067 - How to maintain settings for Analysis Office 2.x to set ResultSetSizeLimit
parameter.
The value of the ResultSetSizeLimit setting is defined as below by default:
<ResultSetSizeLimit The parameter can be set to a specific number to define the maximum
value="400000" /> number of data cells with this value.
The example is changing the ResultSetSizeLimit to 400.000 data cells.
<ResultSetSizeLimit The parameter can be set to -1 so that the setting uses the values defined
value="-1" /> in the BW System (see section 3.2).
In HANA there is no configuration option in the backend. Hence, when using
the value "-1" AO will use the default limitation of 500000.