Professional Documents
Culture Documents
high pressure type (20 bar) fig. 1110 is equipped with a flat faced pressure ring.
long barrel, gland packed end connections: 1/4” to 1”
heavy pattern (12 bar)
plug type
In the position shown (handle in the longitudinal direction of the valve) the valves
are open. Figures 91 and 92 are also available with the handle at a right angle to
the bore.
BSPP threaded ends: fig. 1110 - 1111: 1/4” to 1” | fig. 91 - 92 - 93: 1/8” to 1”
econ cocks cocks for gas cocks for gas with hose spigot
1
/ 4” to 1/ 2” 1
/8 ” to 1/ 2”
brass
with female with
threaded male/female
ends threaded
ends
fig. 6 fig. 7 fig. 8 fig. 8b
fig. 26
fig. 707 fig. 709 *ball valves GIVEG and DVGW approved, see page 96
fig. 708
cast iron body
brass trim fig. 712
oil tap
3
/ 8” to 11/ 4”
dimensions: As the dimensions of the cocks mentioned on this page are generally not of
great importance with regard to a proper installation, they are not mentioned.
We will send you the relevant drawings upon request.