Professional Documents
Culture Documents
The steel structure project is the easiest work to do. You know why? It will just start
with anchor bolt installation, checking the distances of the anchor bolts and the
critical distance. Ensuring the locations and level by providing survey report. Erecting
the steel members start from column bracing, rafters, purlins, beam, joist etc. A
tremendously easy and can be erected quickly.
Steel structure work is really different from concrete structure, concrete works are
more complex, especially when the project is a high-rise concrete structure.
Therefore, the foundation will be huge enough to carry all the load transferred from
superstructure then follows the complexity of the construction of foundation towards
superstructure.
In concrete structure, steel reinforcement holds the concrete elements that make it
stand and firm, but in steel structure, it’s either the rivets or bolts that held it stand.
So, I am going to write the most common method of checking the tightness of
connection bolts in most practical and easiest way.
Actually, there are five methods of checking the tightness of connection bolts. There
is “Direct Tension Indicator” or DTI. The direct tension indicator is usually written in
the specification and one of the requirements to check the bolt for tightness. There is
that called “Turn-of-Nut” method which is also easy to use but hugely tedious.
Imagine that if you have 3,000 bolts in one “truss or floor beams” it is not practical.
The other methods, we will discuss it later.
Now, in our projects we’ve used the most extremely simple and easy ways to
checking the connection bolts tightness and you should be doing this in your project.
Here is the guide to check the connection bolts using calibrated wrench pre-tensioning
or torque wrench.
1. Calibration Certificate
Maintain the calibration certificate of the torque wrench. If you have subcontractor
require them to submit the calibration certificate and keep it in a file. Log it in your
equipment calibration log to trace the date of expiration or validity of calibration.
Make sure it is up to date.
Before checking the bolts with torque, the bolts should have been tightened to snug-
tight condition via impact machine. Make sure that all the bolts have been impacted.
Impacting to snug-tight condition
There are standards that specify the torque values of the bolts like German Standard,
British Standard, and American Standard. Some use the German Standard, but in our
current project we are using American Standard which is ASTM A325 and ASTM
A390. It is important to determine first the tightening torque requirement of bolt
before checking the bolts with a torque wrench.
If you are in the connection plate consists of a group of bolts shown in the above
photo. Let us have an example to just explain how the system of checking. The
tightening would start either from the bottom corners of the plate, let us say you
would want to start at lower left corner and then cross in the upper right corner of the
plate and vice-versa.
You should take extra care when the erection of steel structure, especially high-rise
steel structure, hangars with 43.0-meter columns, space steel truss for pipe racks etc.
If you will not consider the importance of connection bolts, those structures may fail.
Because of bolts, that is why those structures I have mentioned are still standing
rigidly and firm.