Professional Documents
Culture Documents
Standard Features
Removable basket for easy cleaning.
Meets design requirements of ASME B31.3.
NACE MR-01-75 compliance for products with
hydrogen sulfide concentrations.
0.50" NPT differential pressure taps on the nozzles.
1.50" NPT Cover vent connection to mount Air
Release Kit for static air elimination.
ASME B16.5 Raised Face Flange standard.
Horizontal or vertical operation.
Basket Seal. Model S4-1-ST Strainer
Basket Differential Pressure Gauge Kit with isola- 40 (Std.) 0.015 (0.38) 25.9%
tion valves to monitor basket cleanliness. 10 0.075 (1.91) 40.5%
∆P Gauge Reed Type Switch Kit, adjustable from 20 0.036 (0.91) 37.3%
0–30 psi (0–207 kPa) for remote indication. 60 0.0082 (0.21) 24.2%
Note: For other strainers/options, consult Specification Bulletin
No. SS03038. 80 0.007 (0.18) 22.6%
No Liner
Working Pressure1
Flange Class psi (kPa)
150 285 (1,965)
300 740 (5,102)
Temperature Range
Seal Material Range
Garlock -20˚F to 400˚F (-29˚C to 204˚C)
60 Mesh 80 Mesh Perforated
Plate
1 Maximum working pressures are for temperatures of -20°F to 100°F (-28°C to 38°C). Operating temperatures above 100°F (38°C) affect
allowable working pressures. Consult factory for allowable working pressures at required operating temperature.
20
10
1.0 6
4
y
le Thru
hr u
hr u
hr u
hr u
cit
∆P ∆P
pa
2 kPa
t-T
t-T
t-T
t-T
psi
Ca
- A ght
ig h
i gh
i gh
i gh
e
4" Strai
i gh
l
tra
ng
tra
tra
tra
ng
-S
-H
-S
-A
-S
-S
-
3"
2"
4"
4"
6"
6"
8"
1
0.1 0.6
0.4
0.2
0.1
0.01
10 20 40 60 80 100 200 400 600 800 1,000 2,000 10,000
Flow - U.S. Gallons per Minute
2 Maximum working pressures are for temperatures of -20°F to 100°F (-28°C to 38°C).
C
H
C
C B
E
Required Distance B
for Basket Removal B
F
In-Line Strainer in 0.5" NPT ∆P Taps A A
Vertical Orientation
Flow
Note: Dimensions – Inches to the nearest tenth (millimeters to the nearest whole mm), each independently dimensioned from respective
engineering drawings. Add 47.0 Lb (21.3 Kg) if Air Release Kit is used.
The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently
in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
Contact information is subject to change. For the most current contact information, visit our website at www.fmctechnologies.com/measurementsolutions and click on the
“Contact Us” link in the left-hand column.
Headquarters:
500 North Sam Houston Parkway West, Suite 100, Houston, TX 77067 USA, Phone: +1 (281) 260 2190, Fax: +1 (281) 260 2191
Measurement Products and Equipment: Integrated Measurement Systems:
Erie, PA USA +1 (814) 898 5000 Dubai, United Arab Emirates +971 (4) 883 0303 Corpus Christi, TX USA +1 (361) 289 3400
Ellerbek, Germany +49 (4101) 3040 Los Angeles, CA USA +1 (310) 328 1236 Kongsberg, Norway +47 (32) 286700
Barcelona, Spain +34 (93) 201 0989 Melbourne, Australia +61 (3) 9807 2818 Dubai, United Arab Emirates +971 (4) 883 0303
Beijing, China +86 (10) 6500 2251 Moscow, Russia +7 (495) 5648705
Burnham, England +44 (1628) 603205 Singapore +65 6861 3011