Professional Documents
Culture Documents
L E A R N M O R E A B O U T U P R I N T S E P L U S AT S T R ATA S Y S . C O M
PRODUCT SPECIFICATIONS
At the core:
uPrint SE Plus 3D Printers are based on System Specifications
Stratasys® FDM technology. FDM builds parts in
Model Material ABSplus in ivory, white, blue, fluorescent yellow, black, red, nectarine, olive
production-grade thermoplastics, enabling the green, gray
No special facilities needed Maximum Build Size 203 x 203 x 152 mm (8 x 8 x 6 in)
You can install an FDM 3D Printer just about Layer Thickness .254 mm (.010 in) or .330 mm (.013 in)
HEADQUARTERS
7665 Commerce Way, 2 Holtzman St., Science Park,
Eden Prairie, MN 55344 PO Box 2496
+1 800 801 6491 (US Toll Free) Rehovot 76124, Israel
+1 952 937-3000 (Intl) +972 74 745 4000
S TR ATA SYS.C OM +1 952 937-0070 (Fax) +972 74 745 5000 (Fax)
ISO 9001:2008 Certified
©2013, 2015, 2016, 2017 Stratasys Inc. All rights reserved. Stratasys, Stratasys logo, For a 3D World, FDM, FDM Technology, Fused Deposition Modeling, uPrint, uPrint SE Plus, Print Pack, Catalyst, ABSplus, WaveWash and Ecoworks are
trademarks or registered trademarks of Stratasys Inc. and/or its subsidiaries or affiliates and may be registered in certain jurisdictions. PSS_FDM_uPrintSEPlus_0117a