Professional Documents
Culture Documents
Bag Filters PDF
Bag Filters PDF
BAG FILTER
Bag filters with jet-pulse cleaning are mostly preferred equipments in dedusting
systems due to their high efficiency with low emission, stable working even under
variable operational conditions and low investment cost.
Today it is possible to achieve less than 5 mg/Nm3 emission level with jet-pulse
bag filters.
Working Principle
Filtration is basically the separation of the solids from the gas by mean of a filter media
through which only gas can pass, while dust particles in the gas are retained on the filter
media.
The dust removed from the bag surfaces falls down to the hopper where it is
discharged out of the filter.
FEATURES
- Flexi-Modular design
- Precisely manufactured module parts and panels
- Certified header tanks
- High efficiency immersion valves
- Matrix connection between valves and electronic sequencer
- Electronic sequencer with ∆P option
Advantages
Selection Guide
Filter selection for a certain capacity can be done by following below steps;
- According to the needed filtration capacity, find the required filtration area
corresponding to suitable filtration velocity.
- Decide the bag length.
- Select the filter type (n and m) with filtration area nearest to required filtration area
from the table
- Check for the dimensions of filter casing.
FILTER TYPE
CJB X XX * XX
Number of modules (n)
14 101 202 302 403 504 605 706 806 907 1008
Dimension 300 Series 400 Series
A (mm) n x 700 n x 900
B (mm) (m x 200)+300 (m x 200)+300
C (mm) 2.000 3.600
D (mm)