Professional Documents
Culture Documents
1. Enter BIOS:
A. Change the SATA to COMPATIBILITY MODE (only on new
hardware).
B. Change the Startup sequence to CD first, HD second and
exclude the rest.
2. Boot from Installation CD (press ENTER).
3. Enter the Windows Setup.
4. Press F8 (I Agree).
5. Delete all existing partitions.
6. Create new partition but leave at least 10GB free (for the image files).
7. Format C: using NTFS quick format.
8. Reboot automatically.
9. After installing hardware you will be able to configure "regional
setting".
10. At the middle tab select the "right to left languages".
11. Apply.
12. Go to the Regional tab and select.
A. Hebrew
B. Israel
13. Go to the advanced tab and select (after 10 clicks down) "Hebrew
20424"
14. Computer Name is always it's type in Capital Letters (T40, 8381-
CTO).
15. Name and Organization: Both "NEXTCOM GROUP LTD"
16. License Key
17. Time zone: Jerusalem (+2)
18. Maybe LAN configuring / just next.
19. End of installation / Reboot
20. A. maybe admin mode – no changes – you are in windows as
administrator
B. maybe profile setup – you are USER => everything is no => you are in
windows as USER.
21. Copy I386 to C:\ => eject CD
22. If USER mode right click on my computer => Manage => local user &
groups => at "Users" delete USER => yes => yes
23. Log off => log in as Administrator.
24. Right click on desktop: Arrange icon by name => Auto arrange.
25. Right click on My Computer => manage => Disk Management:
Change CD Drive letter to E and create a second partition using all the disk
space left.
26. Rename the drive C: to STARTUP and drive D: to DON’T TOUCH.
27. Right click on my computer => properties
28. Select remote desktop with V
29. At the Advanced tab select "adjust for best performance"
30. Go to "control panel" => "Power options" => every thing is never.
31. Go to display properties => screen saver => None
32. TASK BAR:
A. unlock and expand the spaces
B. properties
C. V on "Show quick launch"
D. On tab "start menu" => "show classic …"
E. Lock the task bar.
33. If LAN is not installed we need to install it at the "device manager"
34. REMEMBER: Ethernet – LAN , Network – WAN.
35. Right click on "my network places" => Properties.
36. Right click on LAN => Properties
37. Show icon with V
38. Go to "advance" tab
39. Setting /+ firewall off => OK => OK => close all
40. On pop windows that will appear – click on it
41. Every thing must get V in recommendations X2
42. Enable windows updates
43. Right click on "my computer" => "properties"
44. Automatic update tab => download update for me
45. Windows updates
46. All the jump popup – never select V
Only close them and always accept them by clicking on the yellow lines and
running the active X.
47. Before making any update be sure that the time + date configured
correctly.
48. Don't run express setup! This will install SP 3 automatically.
49. After a group of installs always make a restart even if the computer
will not ask u to.
50. After minimum 4 restarts of updates ran costume updates
51. Be aware that after the first C.U. and after a reboot you will get critical
updates again. So always run: 1) critical, 2) software, 3) drivers.
52. When there are no updates left, run the SP 3 full installation.
53. Drivers: on notebooks never install the WAN driver!
54. Driver for :
Non standard notebook or computer Standard notebook or computer:
1."Pci Device" => need driver UUHAA 1. Video update
"high definition audio device" 2. Audio update
2. After UUHAA device, you will be 3. Modem update
able to install modem + audio device 4. Different update
* Unless everything was install by
windows Microsoft update.
GHOST
• Run Norton Ghost 2003.
• Click on Backup.
• Click 'Next'.
• Destination Must be 'File' and Source 'STARTUP (C:)'.
• Click 'Next'.
• Add Ghost disk identification => Click OK.
• Image file name: Click 'Browse' => Choose Drive D: (DON’T
TOUCH) and file name is the same as the computer's name (its type).
• Click 'Next'.
• Click 'Continue' at every massage window.
• Choose 'Advanced'.
• Click on the 'Command line' tab and write the following line:
'split=690'.
• Click 'OK'.
• At the last window, Click the 'Run now' button and accept the warning.
The Computer will now reboot, load the Norton Ghost DOS program and create the
image files on drive D: (DON’T TOUCH). After the process is done, the Computer
will reboot automatically into Windows.
The Computer will now restart and have only one partition (STATUP). After a few
minutes you will get a 'new hardware has been installed' massage which will ask you
to restart the computer. Wait until there is no more HD activity and then restart the
computer. If you have followed all the steps above, you are now done!!!